blob: 65d2ca4e01c2d6e22a8f69bbe8493624d6e9fc44 [file] [log] [blame]
/**************************************************************
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*
*************************************************************/
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"
#include <hintids.hxx>
#include <vcl/svapp.hxx>
#include <editeng/protitem.hxx>
#include <crsrsh.hxx>
#include <doc.hxx>
#include <cntfrm.hxx>
#include <editsh.hxx> //EndAllAction gibts nur an der EditShell
#include <pam.hxx>
#include <swtable.hxx>
#include <docary.hxx>
#include <frmatr.hxx>
#include <frmfmt.hxx>
#include <viscrs.hxx>
#include <callnk.hxx>
#include <tabfrm.hxx>
#include <ndtxt.hxx>
#include <shellres.hxx>
#include <cellatr.hxx>
#include <cellfrm.hxx>
#include <rowfrm.hxx>
// setze Crsr in die naechsten/vorherigen Celle
sal_Bool SwCrsrShell::GoNextCell( sal_Bool bAppendLine )
{
sal_Bool bRet = sal_False;
const SwTableNode* pTblNd = 0;
if( IsTableMode() || 0 != ( pTblNd = IsCrsrInTbl() ))
{
SwCursor* pCrsr = pTblCrsr ? pTblCrsr : pCurCrsr;
SwCallLink aLk( *this ); // Crsr-Moves ueberwachen,
bRet = sal_True;
// Check if we have to move the cursor to a covered cell before
// proceeding:
const SwNode* pTableBoxStartNode = pCrsr->GetNode()->FindTableBoxStartNode();
const SwTableBox* pTableBox = 0;
if ( pCrsr->GetCrsrRowSpanOffset() )
{
pTableBox = pTableBoxStartNode->GetTblBox();
if ( pTableBox->getRowSpan() > 1 )
{
if ( !pTblNd )
pTblNd = IsCrsrInTbl();
pTableBox = & pTableBox->FindEndOfRowSpan( pTblNd->GetTable(),
(sal_uInt16)(pTableBox->getRowSpan() + pCrsr->GetCrsrRowSpanOffset() ) );
pTableBoxStartNode = pTableBox->GetSttNd();
}
}
SwNodeIndex aCellStt( *pTableBoxStartNode->EndOfSectionNode(), 1 );
// folgt nach dem EndNode der Cell ein weiterer StartNode, dann
// gibt es auch eine naechste Celle
if( !aCellStt.GetNode().IsStartNode() )
{
if( pCrsr->HasMark() || !bAppendLine )
bRet = sal_False;
else
{
// auf besonderen Wunsch: keine Line mehr vorhanden, dann
// mache doch eine neue:
if ( !pTableBox )
pTableBox = pTblNd->GetTable().GetTblBox(
pCrsr->GetPoint()->nNode.GetNode().
StartOfSectionIndex() );
ASSERT( pTableBox, "Box steht nicht in dieser Tabelle" );
SwSelBoxes aBoxes;
//Das Dokument veraendert sich evtl. ohne Action wuerden die Sichten
//nichts mitbekommen.
((SwEditShell*)this)->StartAllAction();
bRet = pDoc->InsertRow( pTblNd->GetTable().
SelLineFromBox( pTableBox, aBoxes, sal_False ));
((SwEditShell*)this)->EndAllAction();
}
}
if( bRet && 0 != ( bRet = pCrsr->GoNextCell() ))
UpdateCrsr(); // und den akt. Updaten
}
return bRet;
}
sal_Bool SwCrsrShell::GoPrevCell()
{
sal_Bool bRet = sal_False;
const SwTableNode* pTblNd;
if( IsTableMode() || 0 != ( pTblNd = IsCrsrInTbl() ))
{
SwCursor* pCrsr = pTblCrsr ? pTblCrsr : pCurCrsr;
SwCallLink aLk( *this ); // Crsr-Moves ueberwachen,
bRet = pCrsr->GoPrevCell();
if( bRet )
UpdateCrsr(); // und den akt. Updaten
}
return bRet;
}
const SwFrm* lcl_FindMostUpperCellFrm( const SwFrm* pFrm )
{
while ( pFrm &&
( !pFrm->IsCellFrm() ||
!pFrm->GetUpper()->GetUpper()->IsTabFrm() ||
pFrm->GetUpper()->GetUpper()->GetUpper()->IsInTab() ) )
{
pFrm = pFrm->GetUpper();
}
return pFrm;
}
sal_Bool SwCrsrShell::_SelTblRowOrCol( bool bRow, bool bRowSimple )
{
// pruefe ob vom aktuellen Crsr der SPoint/Mark in einer Tabelle stehen
SwFrm *pFrm = GetCurrFrm();
if( !pFrm->IsInTab() )
return sal_False;
const SwTabFrm* pTabFrm = pFrm->FindTabFrm();
const SwTabFrm* pMasterTabFrm = pTabFrm->IsFollow() ? pTabFrm->FindMaster( true ) : pTabFrm;
const SwTable* pTable = pTabFrm->GetTable();
SET_CURR_SHELL( this );
const SwTableBox* pStt = 0;
const SwTableBox* pEnd = 0;
// lasse ueber das Layout die Boxen suchen
SwSelBoxes aBoxes;
SwTblSearchType eType = bRow ? nsSwTblSearchType::TBLSEARCH_ROW : nsSwTblSearchType::TBLSEARCH_COL;
const bool bCheckProtected = !IsReadOnlyAvailable();
if( bCheckProtected )
eType = (SwTblSearchType)(eType | nsSwTblSearchType::TBLSEARCH_PROTECT);
if ( !bRowSimple )
{
GetTblSel( *this, aBoxes, eType );
if( !aBoxes.Count() )
return sal_False;
pStt = aBoxes[0];
pEnd = aBoxes[aBoxes.Count() - 1];
}
// --> FME 2004-07-30 #i32329# Enhanced table selection
else if ( pTable->IsNewModel() )
{
const SwShellCrsr *pCrsr = _GetCrsr();
SwTable::SearchType eSearchType = bRow ? SwTable::SEARCH_ROW : SwTable::SEARCH_COL;
pTable->CreateSelection( *pCrsr, aBoxes, eSearchType, bCheckProtected );
if( !aBoxes.Count() )
return sal_False;
pStt = aBoxes[0];
pEnd = aBoxes[aBoxes.Count() - 1];
}
else
{
const SwShellCrsr *pCrsr = _GetCrsr();
const SwFrm* pStartFrm = pFrm;
const SwCntntNode *pCNd = pCrsr->GetCntntNode( sal_False );
const SwFrm* pEndFrm = pCNd ? pCNd->getLayoutFrm( GetLayout(), &pCrsr->GetMkPos() ) : 0;
if ( bRow )
{
pStartFrm = lcl_FindMostUpperCellFrm( pStartFrm );
pEndFrm = lcl_FindMostUpperCellFrm( pEndFrm );
}
if ( !pStartFrm || !pEndFrm )
return sal_False;
const bool bVert = pFrm->ImplFindTabFrm()->IsVertical();
// If we select upwards it is sufficient to set pStt and pEnd
// to the first resp. last box of the selection obtained from
// GetTblSel. However, selecting downwards requires the frames
// located at the corners of the selection. This does not work
// for column selections in vertical tables:
const bool bSelectUp = ( bVert && !bRow ) ||
*pCrsr->GetPoint() <= *pCrsr->GetMark();
SwCellFrms aCells;
GetTblSel( static_cast<const SwCellFrm*>(pStartFrm),
static_cast<const SwCellFrm*>(pEndFrm),
aBoxes, bSelectUp ? 0 : &aCells, eType );
if( !aBoxes.Count() || ( !bSelectUp && 4 != aCells.Count() ) )
return sal_False;
if ( bSelectUp )
{
pStt = aBoxes[0];
pEnd = aBoxes[aBoxes.Count() - 1];
}
else
{
pStt = aCells[ bVert ? (bRow ? 0 : 3) : (bRow ? 2 : 1) ]->GetTabBox(); // will become point of table cursor
pEnd = aCells[ bVert ? (bRow ? 3 : 0) : (bRow ? 1 : 2) ]->GetTabBox(); // will become mark of table cursor
}
}
// <--
// noch kein Tabellen-Cursor vorhanden, dann erzeuge einen
if( !pTblCrsr )
{
pTblCrsr = new SwShellTableCrsr( *this, *pCurCrsr->GetPoint() );
pCurCrsr->DeleteMark();
pCurCrsr->SwSelPaintRects::Hide();
}
pTblCrsr->DeleteMark();
// dann setze mal Anfang und Ende der Spalte
pTblCrsr->GetPoint()->nNode = *pEnd->GetSttNd();
pTblCrsr->Move( fnMoveForward, fnGoCntnt );
pTblCrsr->SetMark();
pTblCrsr->GetPoint()->nNode = *pStt->GetSttNd()->EndOfSectionNode();
pTblCrsr->Move( fnMoveBackward, fnGoCntnt );
// set PtPos 'close' to the reference table, otherwise we might get problems with the
// repeated headlines check in UpdateCrsr():
if ( !bRow )
pTblCrsr->GetPtPos() = pMasterTabFrm->IsVertical() ? pMasterTabFrm->Frm().TopRight() : pMasterTabFrm->Frm().TopLeft();
UpdateCrsr(); // und den akt. Updaten
return sal_True;
}
sal_Bool SwCrsrShell::SelTbl()
{
// pruefe ob vom aktuellen Crsr der SPoint/Mark in einer Tabelle stehen
SwFrm *pFrm = GetCurrFrm();
if( !pFrm->IsInTab() )
return sal_False;
const SwTabFrm *pTblFrm = pFrm->ImplFindTabFrm();
const SwTabFrm* pMasterTabFrm = pTblFrm->IsFollow() ? pTblFrm->FindMaster( true ) : pTblFrm;
const SwTableNode* pTblNd = pTblFrm->GetTable()->GetTableNode();
SET_CURR_SHELL( this );
if( !pTblCrsr )
{
pTblCrsr = new SwShellTableCrsr( *this, *pCurCrsr->GetPoint() );
pCurCrsr->DeleteMark();
pCurCrsr->SwSelPaintRects::Hide();
}
pTblCrsr->DeleteMark();
pTblCrsr->GetPoint()->nNode = *pTblNd;
pTblCrsr->Move( fnMoveForward, fnGoCntnt );
pTblCrsr->SetMark();
// set MkPos 'close' to the master table, otherwise we might get problems with the
// repeated headlines check in UpdateCrsr():
pTblCrsr->GetMkPos() = pMasterTabFrm->IsVertical() ? pMasterTabFrm->Frm().TopRight() : pMasterTabFrm->Frm().TopLeft();
pTblCrsr->GetPoint()->nNode = *pTblNd->EndOfSectionNode();
pTblCrsr->Move( fnMoveBackward, fnGoCntnt );
UpdateCrsr(); // und den akt. Updaten
return sal_True;
}
sal_Bool SwCrsrShell::SelTblBox()
{
// if we're in a table, create a table cursor, and select the cell
// that the current cursor's point resides in
// search for start node of our table box. If not found, exit realy
const SwStartNode* pStartNode =
pCurCrsr->GetPoint()->nNode.GetNode().FindTableBoxStartNode();
#ifdef DBG_UTIL
// the old code checks whether we're in a table by asking the
// frame. This should yield the same result as searching for the
// table box start node, right?
SwFrm *pFrm = GetCurrFrm();
DBG_ASSERT( !pFrm->IsInTab() == !(pStartNode != NULL),
"Schroedinger's table: We're in a box, and also we aren't." );
#endif
if( pStartNode == NULL )
return sal_False;
SET_CURR_SHELL( this );
// create a table cursor, if there isn't one already
if( !pTblCrsr )
{
pTblCrsr = new SwShellTableCrsr( *this, *pCurCrsr->GetPoint() );
pCurCrsr->DeleteMark();
pCurCrsr->SwSelPaintRects::Hide();
}
// select the complete box with our shiny new pTblCrsr
// 1. delete mark, and move point to first content node in box
// 2. set mark, and move point to last content node in box
// 3. exchange
pTblCrsr->DeleteMark();
*(pTblCrsr->GetPoint()) = SwPosition( *pStartNode );
pTblCrsr->Move( fnMoveForward, fnGoNode );
pTblCrsr->SetMark();
*(pTblCrsr->GetPoint()) = SwPosition( *(pStartNode->EndOfSectionNode()) );
pTblCrsr->Move( fnMoveBackward, fnGoNode );
pTblCrsr->Exchange();
// with some luck, UpdateCrsr() will now update everything that
// needs updateing
UpdateCrsr();
return sal_True;
}
// return the next non-protected cell inside a table
// rIdx - is on a table node
// return:
// true - Idx points to content in a suitable cell
// false - could not find a suitable cell
bool lcl_FindNextCell( SwNodeIndex& rIdx, sal_Bool bInReadOnly )
{
// ueberpruefe geschuetzte Zellen
SwNodeIndex aTmp( rIdx, 2 ); // TableNode + StartNode
// the resulting cell should be in that table:
const SwTableNode* pTblNd = rIdx.GetNode().GetTableNode();
if ( !pTblNd )
{
ASSERT( false, "lcl_FindNextCell not celled with table start node!" )
return false;
}
const SwNode* pTableEndNode = pTblNd->EndOfSectionNode();
SwNodes& rNds = aTmp.GetNode().GetNodes();
SwCntntNode* pCNd = aTmp.GetNode().GetCntntNode();
// no content node => go to next content node
if( !pCNd )
pCNd = rNds.GoNext( &aTmp );
// robust
if ( !pCNd )
return false;
SwCntntFrm* pFrm = pCNd->getLayoutFrm( pCNd->GetDoc()->GetCurrentLayout() );
if ( 0 == pFrm || pCNd->FindTableNode() != pTblNd ||
(!bInReadOnly && pFrm->IsProtected() ) )
{
// we are not located inside a 'valid' cell. We have to continue searching...
// skip behind current section. This might be the end of the table cell
// or behind a inner section or or or...
aTmp.Assign( *pCNd->EndOfSectionNode(), 1 );
// loop to find a suitable cell...
for( ;; )
{
SwNode* pNd = &aTmp.GetNode();
// we break this loop if we reached the end of the table.
// to make this code even more robust, we also break if we are
// already behind the table end node:
if( pNd == pTableEndNode || /*robust: */ pNd->GetIndex() > pTableEndNode->GetIndex() )
return false;
// ok, get the next content node:
pCNd = aTmp.GetNode().GetCntntNode();
if( 0 == pCNd )
pCNd = rNds.GoNext( &aTmp );
// robust:
if ( !pCNd )
return false;
// check if we have found a suitable table cell:
pFrm = pCNd->getLayoutFrm( pCNd->GetDoc()->GetCurrentLayout() );
if ( 0 != pFrm && pCNd->FindTableNode() == pTblNd &&
(bInReadOnly || !pFrm->IsProtected() ) )
{
// finally, we have found a suitable table cell => set index and return
rIdx = *pCNd;
return true;
}
// continue behind the current section:
aTmp.Assign( *pCNd->EndOfSectionNode(), +1 );
}
}
rIdx = *pCNd;
return true;
}
// comments see lcl_FindNextCell
bool lcl_FindPrevCell( SwNodeIndex& rIdx, sal_Bool bInReadOnly )
{
SwNodeIndex aTmp( rIdx, -2 ); // TableNode + EndNode
const SwNode* pTableEndNode = &rIdx.GetNode();
const SwTableNode* pTblNd = pTableEndNode->StartOfSectionNode()->GetTableNode();
if ( !pTblNd )
{
ASSERT( false, "lcl_FindPrevCell not celled with table start node!" )
return false;
}
SwNodes& rNds = aTmp.GetNode().GetNodes();
SwCntntNode* pCNd = aTmp.GetNode().GetCntntNode();
if( !pCNd )
pCNd = rNds.GoPrevious( &aTmp );
if ( !pCNd )
return false;
SwCntntFrm* pFrm = pCNd->getLayoutFrm( pCNd->GetDoc()->GetCurrentLayout() );
if( 0 == pFrm || pCNd->FindTableNode() != pTblNd ||
(!bInReadOnly && pFrm->IsProtected() ))
{
// skip before current section
aTmp.Assign( *pCNd->StartOfSectionNode(), -1 );
for( ;; )
{
SwNode* pNd = &aTmp.GetNode();
if( pNd == pTblNd || pNd->GetIndex() < pTblNd->GetIndex() )
return false;
pCNd = aTmp.GetNode().GetCntntNode();
if( 0 == pCNd )
pCNd = rNds.GoPrevious( &aTmp );
if ( !pCNd )
return false;
pFrm = pCNd->getLayoutFrm( pCNd->GetDoc()->GetCurrentLayout() );
if( 0 != pFrm && pCNd->FindTableNode() == pTblNd &&
(bInReadOnly || !pFrm->IsProtected() ) )
{
rIdx = *pCNd;
return true; // Ok, nicht geschuetzt
}
aTmp.Assign( *pCNd->StartOfSectionNode(), - 1 );
}
}
rIdx = *pCNd;
return true;
}
sal_Bool GotoPrevTable( SwPaM& rCurCrsr, SwPosTable fnPosTbl,
sal_Bool bInReadOnly )
{
SwNodeIndex aIdx( rCurCrsr.GetPoint()->nNode );
SwTableNode* pTblNd = aIdx.GetNode().FindTableNode();
if( pTblNd )
{
// #i26532#: If we are inside a table, we may not go backward
// to the table start node, because we would miss any tables
// inside this table.
SwTableNode* pInnerTblNd = 0;
SwNodeIndex aTmpIdx( aIdx );
while( aTmpIdx.GetIndex() &&
0 == ( pInnerTblNd = aTmpIdx.GetNode().StartOfSectionNode()->GetTableNode()) )
aTmpIdx--;
if( pInnerTblNd == pTblNd )
aIdx.Assign( *pTblNd, - 1 );
}
do {
while( aIdx.GetIndex() &&
0 == ( pTblNd = aIdx.GetNode().StartOfSectionNode()->GetTableNode()) )
aIdx--;
if( pTblNd ) // gibt einen weiteren TableNode ?
{
if( fnPosTbl == fnMoveForward ) // an Anfang ?
{
aIdx = *aIdx.GetNode().StartOfSectionNode();
if( !lcl_FindNextCell( aIdx, bInReadOnly ))
{
// Tabelle ueberspringen
aIdx.Assign( *pTblNd, -1 );
continue;
}
}
else
{
// ueberpruefe geschuetzte Zellen
if( !lcl_FindNextCell( aIdx, bInReadOnly ))
{
// Tabelle ueberspringen
aIdx.Assign( *pTblNd, -1 );
continue;
}
}
SwTxtNode* pTxtNode = aIdx.GetNode().GetTxtNode();
if ( pTxtNode )
{
rCurCrsr.GetPoint()->nNode = *pTxtNode;
rCurCrsr.GetPoint()->nContent.Assign( pTxtNode, fnPosTbl == fnMoveBackward ?
pTxtNode->Len() :
0 );
}
return sal_True;
}
} while( pTblNd );
return sal_False;
}
sal_Bool GotoNextTable( SwPaM& rCurCrsr, SwPosTable fnPosTbl,
sal_Bool bInReadOnly )
{
SwNodeIndex aIdx( rCurCrsr.GetPoint()->nNode );
SwTableNode* pTblNd = aIdx.GetNode().FindTableNode();
if( pTblNd )
aIdx.Assign( *pTblNd->EndOfSectionNode(), 1 );
sal_uLong nLastNd = rCurCrsr.GetDoc()->GetNodes().Count() - 1;
do {
while( aIdx.GetIndex() < nLastNd &&
0 == ( pTblNd = aIdx.GetNode().GetTableNode()) )
aIdx++;
if( pTblNd ) // gibt einen weiteren TableNode ?
{
if( fnPosTbl == fnMoveForward ) // an Anfang ?
{
if( !lcl_FindNextCell( aIdx, bInReadOnly ))
{
// Tabelle ueberspringen
aIdx.Assign( *pTblNd->EndOfSectionNode(), + 1 );
continue;
}
}
else
{
aIdx = *aIdx.GetNode().EndOfSectionNode();
// ueberpruefe geschuetzte Zellen
if( !lcl_FindNextCell( aIdx, bInReadOnly ))
{
// Tabelle ueberspringen
aIdx.Assign( *pTblNd->EndOfSectionNode(), + 1 );
continue;
}
}
SwTxtNode* pTxtNode = aIdx.GetNode().GetTxtNode();
if ( pTxtNode )
{
rCurCrsr.GetPoint()->nNode = *pTxtNode;
rCurCrsr.GetPoint()->nContent.Assign( pTxtNode, fnPosTbl == fnMoveBackward ?
pTxtNode->Len() :
0 );
}
return sal_True;
}
} while( pTblNd );
return sal_False;
}
sal_Bool GotoCurrTable( SwPaM& rCurCrsr, SwPosTable fnPosTbl,
sal_Bool bInReadOnly )
{
SwTableNode* pTblNd = rCurCrsr.GetPoint()->nNode.GetNode().FindTableNode();
if( !pTblNd )
return sal_False;
SwTxtNode* pTxtNode = 0;
if( fnPosTbl == fnMoveBackward ) // ans Ende der Tabelle
{
SwNodeIndex aIdx( *pTblNd->EndOfSectionNode() );
if( !lcl_FindPrevCell( aIdx, bInReadOnly ))
return sal_False;
pTxtNode = aIdx.GetNode().GetTxtNode();
}
else
{
SwNodeIndex aIdx( *pTblNd );
if( !lcl_FindNextCell( aIdx, bInReadOnly ))
return sal_False;
pTxtNode = aIdx.GetNode().GetTxtNode();
}
if ( pTxtNode )
{
rCurCrsr.GetPoint()->nNode = *pTxtNode;
rCurCrsr.GetPoint()->nContent.Assign( pTxtNode, fnPosTbl == fnMoveBackward ?
pTxtNode->Len() :
0 );
}
return sal_True;
}
sal_Bool SwCursor::MoveTable( SwWhichTable fnWhichTbl, SwPosTable fnPosTbl )
{
sal_Bool bRet = sal_False;
SwTableCursor* pTblCrsr = dynamic_cast<SwTableCursor*>(this);
if( pTblCrsr || !HasMark() ) // nur wenn kein Mark oder ein TblCrsr
{
SwCrsrSaveState aSaveState( *this );
bRet = (*fnWhichTbl)( *this, fnPosTbl, IsReadOnlyAvailable() ) &&
!IsSelOvr( nsSwCursorSelOverFlags::SELOVER_CHECKNODESSECTION |
nsSwCursorSelOverFlags::SELOVER_TOGGLE );
}
return bRet;
}
sal_Bool SwCrsrShell::MoveTable( SwWhichTable fnWhichTbl, SwPosTable fnPosTbl )
{
SwCallLink aLk( *this ); // Crsr-Moves ueberwachen, evt. Link callen
SwShellCrsr* pCrsr = pTblCrsr ? pTblCrsr : pCurCrsr;
sal_Bool bCheckPos, bRet;
sal_uLong nPtNd = 0;
xub_StrLen nPtCnt = 0;
if( !pTblCrsr && pCurCrsr->HasMark() ) // wenn Mark und kein TblCrsr,
{
// dann auf jedenfall in den Tabellen-Modus schalten
pTblCrsr = new SwShellTableCrsr( *this, *pCurCrsr->GetPoint() );
pCurCrsr->DeleteMark();
pCurCrsr->SwSelPaintRects::Hide();
pTblCrsr->SetMark();
pCrsr = pTblCrsr;
bCheckPos = sal_False;
}
else
{
bCheckPos = sal_True;
nPtNd = pCrsr->GetPoint()->nNode.GetIndex();
nPtCnt = pCrsr->GetPoint()->nContent.GetIndex();
}
bRet = pCrsr->MoveTable( fnWhichTbl, fnPosTbl );
if( bRet )
{
//JP 28.10.97: Bug 45028 - die "oberste" Position setzen fuer
// wiederholte Kopfzeilen
pCrsr->GetPtPos() = Point();
UpdateCrsr(SwCrsrShell::SCROLLWIN|SwCrsrShell::CHKRANGE|SwCrsrShell::READONLY);
if( bCheckPos &&
pCrsr->GetPoint()->nNode.GetIndex() == nPtNd &&
pCrsr->GetPoint()->nContent.GetIndex() == nPtCnt )
bRet = sal_False;
}
return bRet;
}
sal_Bool SwCrsrShell::IsTblComplex() const
{
SwFrm *pFrm = GetCurrFrm( sal_False );
if ( pFrm && pFrm->IsInTab() )
return pFrm->FindTabFrm()->GetTable()->IsTblComplex();
return sal_False;
}
sal_Bool SwCrsrShell::IsTblComplexForChart()
{
sal_Bool bRet = sal_False;
StartAction(); // IsTblComplexForChart() may trigger table formatting
// we better do that inside an action
const SwTableNode* pTNd = pCurCrsr->GetPoint()->nNode.GetNode().FindTableNode();
if( pTNd )
{
// wir stehen in der Tabelle, dann teste mal, ob die Tabelle oder die
// Selektion ausgeglichen ist.
String sSel;
if( pTblCrsr )
sSel = GetBoxNms();
bRet = pTNd->GetTable().IsTblComplexForChart( sSel );
}
EndAction();
return bRet;
}
String SwCrsrShell::GetBoxNms() const
{
String sNm;
const SwPosition* pPos;
SwFrm* pFrm;
if( IsTableMode() )
{
SwCntntNode *pCNd = pTblCrsr->Start()->nNode.GetNode().GetCntntNode();
pFrm = pCNd ? pCNd->getLayoutFrm( GetLayout() ) : 0;
if( !pFrm )
return sNm;
do {
pFrm = pFrm->GetUpper();
} while ( pFrm && !pFrm->IsCellFrm() );
ASSERT( pFrm, "kein Frame zur Box" );
sNm = ((SwCellFrm*)pFrm)->GetTabBox()->GetName();
sNm += ':';
pPos = pTblCrsr->End();
}
else
{
const SwTableNode* pTblNd = IsCrsrInTbl();
if( !pTblNd )
return sNm;
pPos = GetCrsr()->GetPoint();
}
SwCntntNode* pCNd = pPos->nNode.GetNode().GetCntntNode();
pFrm = pCNd ? pCNd->getLayoutFrm( GetLayout() ) : 0;
if( pFrm )
{
do {
pFrm = pFrm->GetUpper();
} while ( pFrm && !pFrm->IsCellFrm() );
if( pFrm )
sNm += ((SwCellFrm*)pFrm)->GetTabBox()->GetName();
}
return sNm;
}
sal_Bool SwCrsrShell::GotoTable( const String& rName )
{
SwCallLink aLk( *this ); // Crsr-Moves ueberwachen,
sal_Bool bRet = !pTblCrsr && pCurCrsr->GotoTable( rName );
if( bRet )
{
pCurCrsr->GetPtPos() = Point();
UpdateCrsr( SwCrsrShell::SCROLLWIN | SwCrsrShell::CHKRANGE |
SwCrsrShell::READONLY ); // und den akt. Updaten
}
return bRet;
}
sal_Bool SwCrsrShell::CheckTblBoxCntnt( const SwPosition* pPos )
{
if( !pBoxIdx || !pBoxPtr || IsSelTblCells() || !IsAutoUpdateCells() )
return sal_False;
// ueberpruefe, ob der Box Inhalt mit dem angegebenen Format der Box
// ueber einstimmt. Wenn nicht, setze neu
SwTableBox* pChkBox = 0;
SwStartNode* pSttNd = 0;
if( !pPos )
{
// gesicherte Position heraus holen.
if( pBoxIdx && pBoxPtr &&
0 != ( pSttNd = pBoxIdx->GetNode().GetStartNode() ) &&
SwTableBoxStartNode == pSttNd->GetStartNodeType() &&
pBoxPtr == pSttNd->FindTableNode()->GetTable().
GetTblBox( pBoxIdx->GetIndex() ) )
pChkBox = pBoxPtr;
}
else if( 0 != ( pSttNd = pPos->nNode.GetNode().
FindSttNodeByType( SwTableBoxStartNode )) )
{
pChkBox = pSttNd->FindTableNode()->GetTable().GetTblBox( pSttNd->GetIndex() );
}
// Box mehr als 1 Absatz?
if( pChkBox && pSttNd->GetIndex() + 2 != pSttNd->EndOfSectionIndex() )
pChkBox = 0;
// jetzt sollten wir mal die Pointer zerstoeren, bevor eine erneute
// Actionklammerung kommt.
if( !pPos && !pChkBox )
ClearTblBoxCntnt();
// liegt der Cursor nicht mehr in dem Bereich ?
if( pChkBox && !pPos &&
( pCurCrsr->HasMark() || pCurCrsr->GetNext() != pCurCrsr ||
pSttNd->GetIndex() + 1 == pCurCrsr->GetPoint()->nNode.GetIndex() ))
pChkBox = 0;
//JP 12.01.99: hat sich der Inhalt der Box ueberhaupt veraendert?
// Ist wichtig, wenn z.B. Undo nicht den richtigen Inhalt wieder
// herstellen konnte.
if( pChkBox )
{
const SwTxtNode* pNd = GetDoc()->GetNodes()[
pSttNd->GetIndex() + 1 ]->GetTxtNode();
if( !pNd ||
( pNd->GetTxt() == ViewShell::GetShellRes()->aCalc_Error &&
SFX_ITEM_SET == pChkBox->GetFrmFmt()->
GetItemState( RES_BOXATR_FORMULA )) )
pChkBox = 0;
}
if( pChkBox )
{
// jetzt sollten wir mal die Pointer zerstoeren, bevor ein weiterer
// aufruf kommt.
ClearTblBoxCntnt();
StartAction();
GetDoc()->ChkBoxNumFmt( *pChkBox, sal_True );
EndAction();
}
return 0 != pChkBox;
}
void SwCrsrShell::SaveTblBoxCntnt( const SwPosition* pPos )
{
if( IsSelTblCells() || !IsAutoUpdateCells() )
return ;
if( !pPos )
pPos = pCurCrsr->GetPoint();
SwStartNode* pSttNd = pPos->nNode.GetNode().FindSttNodeByType( SwTableBoxStartNode );
sal_Bool bCheckBox = sal_False;
if( pSttNd && pBoxIdx )
{
if( pSttNd == &pBoxIdx->GetNode() )
pSttNd = 0; // die haben wir schon
else
bCheckBox = sal_True;
}
else
bCheckBox = 0 != pBoxIdx;
if( bCheckBox )
{
// pBoxIdx Checken
SwPosition aPos( *pBoxIdx );
CheckTblBoxCntnt( &aPos );
}
if( pSttNd )
{
pBoxPtr = pSttNd->FindTableNode()->GetTable().GetTblBox( pSttNd->GetIndex() );
if( pBoxIdx )
*pBoxIdx = *pSttNd;
else
pBoxIdx = new SwNodeIndex( *pSttNd );
}
}
void SwCrsrShell::ClearTblBoxCntnt()
{
delete pBoxIdx, pBoxIdx = 0;
pBoxPtr = 0;
}
sal_Bool SwCrsrShell::EndAllTblBoxEdit()
{
sal_Bool bRet = sal_False;
ViewShell *pSh = this;
do {
if( pSh->IsA( TYPE( SwCrsrShell ) ) )
bRet |= ((SwCrsrShell*)pSh)->CheckTblBoxCntnt(
((SwCrsrShell*)pSh)->pCurCrsr->GetPoint() );
} while( this != (pSh = (ViewShell *)pSh->GetNext()) );
return bRet;
}