| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_svx.hxx" |
| |
| #include "svx/svdstr.hrc" |
| #include "svx/svdglob.hxx" |
| #include <svx/svdmodel.hxx> |
| #include <svx/svdpage.hxx> |
| #include "svx/globl3d.hxx" |
| #include <svx/sphere3d.hxx> |
| |
| #include <svx/svxids.hrc> |
| #include <svx/svx3ditems.hxx> |
| #include <svx/sdr/properties/e3dsphereproperties.hxx> |
| #include <basegfx/vector/b3dvector.hxx> |
| #include <basegfx/point/b3dpoint.hxx> |
| #include <svx/sdr/contact/viewcontactofe3dsphere.hxx> |
| #include <basegfx/polygon/b3dpolygon.hxx> |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| // #110094# DrawContact section |
| |
| sdr::contact::ViewContact* E3dSphereObj::CreateObjectSpecificViewContact() |
| { |
| return new sdr::contact::ViewContactOfE3dSphere(*this); |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| sdr::properties::BaseProperties* E3dSphereObj::CreateObjectSpecificProperties() |
| { |
| return new sdr::properties::E3dSphereProperties(*this); |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| TYPEINIT1(E3dSphereObj, E3dCompoundObject); |
| |
| /************************************************************************* |
| |* |
| |* Kugel aus Polygonfacetten nach Laengen und Breitengrad aufbauen |
| |* |
| \************************************************************************/ |
| |
| E3dSphereObj::E3dSphereObj(E3dDefaultAttributes& rDefault, const basegfx::B3DPoint& rCenter, const basegfx::B3DVector& r3DSize) |
| : E3dCompoundObject(rDefault) |
| { |
| // Defaults setzen |
| SetDefaultAttributes(rDefault); |
| |
| // Uebergebene drueberbuegeln |
| aCenter = rCenter; |
| aSize = r3DSize; |
| } |
| |
| E3dSphereObj::E3dSphereObj() |
| : E3dCompoundObject() |
| { |
| // Defaults setzen |
| E3dDefaultAttributes aDefault; |
| SetDefaultAttributes(aDefault); |
| } |
| |
| /************************************************************************* |
| |* |
| |* Kugel erzeugen ohne die Polygone darin zu erzeugen |
| |* |
| \************************************************************************/ |
| |
| // FG: Dieser Aufruf erfolgt von der 3D-Object Factory (objfac3d.cxx) und zwar ausschliesslich beim |
| // laden von Dokumenten. Hier braucht man keinen CreateSphere-Aufruf, denn die wirkliche |
| // Anzahl Segmente ist ja noch nicht bekannt. Dies war bis zum 10.2.97 ein (kleines) |
| // Speicherleck. |
| E3dSphereObj::E3dSphereObj(int /*dummy*/) // den Parameter braucht es um unterscheiden zu koennen, welcher |
| { // der beiden Konstruktoren gemeint ist. Der obige halt per Default |
| // Defaults setzen |
| E3dDefaultAttributes aDefault; |
| SetDefaultAttributes(aDefault); |
| } |
| |
| void E3dSphereObj::SetDefaultAttributes(E3dDefaultAttributes& rDefault) |
| { |
| // Defaults setzen |
| aCenter = rDefault.GetDefaultSphereCenter(); |
| aSize = rDefault.GetDefaultSphereSize(); |
| } |
| |
| /************************************************************************* |
| |* |
| |* Identifier zurueckgeben |
| |* |
| \************************************************************************/ |
| |
| sal_uInt16 E3dSphereObj::GetObjIdentifier() const |
| { |
| return E3D_SPHEREOBJ_ID; |
| } |
| |
| /************************************************************************* |
| |* |
| |* Wandle das Objekt in ein Gruppenobjekt bestehend aus n Polygonen |
| |* |
| \************************************************************************/ |
| |
| SdrObject *E3dSphereObj::DoConvertToPolyObj(sal_Bool /*bBezier*/, bool /*bAddText*/) const |
| { |
| return NULL; |
| } |
| |
| /************************************************************************* |
| |* |
| |* Leer-Konstruktor |
| |* |
| \************************************************************************/ |
| |
| void E3dSphereObj::ReSegment(sal_uInt32 nHSegs, sal_uInt32 nVSegs) |
| { |
| if((nHSegs != GetHorizontalSegments() || nVSegs != GetVerticalSegments()) && (nHSegs != 0 || nVSegs != 0)) |
| { |
| GetProperties().SetObjectItemDirect(Svx3DHorizontalSegmentsItem(nHSegs)); |
| GetProperties().SetObjectItemDirect(Svx3DVerticalSegmentsItem(nVSegs)); |
| |
| ActionChanged(); |
| } |
| } |
| |
| /************************************************************************* |
| |* |
| |* Zuweisungsoperator |
| |* |
| \************************************************************************/ |
| |
| void E3dSphereObj::operator=(const SdrObject& rObj) |
| { |
| // erstmal alle Childs kopieren |
| E3dCompoundObject::operator=(rObj); |
| |
| // weitere Parameter kopieren |
| const E3dSphereObj& r3DObj = (const E3dSphereObj&) rObj; |
| |
| aCenter = r3DObj.aCenter; |
| aSize = r3DObj.aSize; |
| } |
| |
| /************************************************************************* |
| |* |
| |* Lokale Parameter setzen mit Geometrieneuerzeugung |
| |* |
| \************************************************************************/ |
| |
| void E3dSphereObj::SetCenter(const basegfx::B3DPoint& rNew) |
| { |
| if(aCenter != rNew) |
| { |
| aCenter = rNew; |
| ActionChanged(); |
| } |
| } |
| |
| void E3dSphereObj::SetSize(const basegfx::B3DVector& rNew) |
| { |
| if(aSize != rNew) |
| { |
| aSize = rNew; |
| ActionChanged(); |
| } |
| } |
| |
| /************************************************************************* |
| |* |
| |* Get the name of the object (singular) |
| |* |
| \************************************************************************/ |
| |
| void E3dSphereObj::TakeObjNameSingul(XubString& rName) const |
| { |
| rName=ImpGetResStr(STR_ObjNameSingulSphere3d); |
| |
| String aName( GetName() ); |
| if(aName.Len()) |
| { |
| rName += sal_Unicode(' '); |
| rName += sal_Unicode('\''); |
| rName += aName; |
| rName += sal_Unicode('\''); |
| } |
| } |
| |
| /************************************************************************* |
| |* |
| |* Get the name of the object (plural) |
| |* |
| \************************************************************************/ |
| |
| void E3dSphereObj::TakeObjNamePlural(XubString& rName) const |
| { |
| rName=ImpGetResStr(STR_ObjNamePluralSphere3d); |
| } |
| |
| // eof |