blob: 51b2e86d944c4e52354b493a90705d50103fd569 [file] [log] [blame]
/**************************************************************
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*
*************************************************************/
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svtools.hxx"
#include <rtl/math.hxx>
#include <osl/endian.h>
#include <vcl/graph.hxx>
#include <tools/poly.hxx>
#include <svtools/filter.hxx>
#include "sgffilt.hxx"
#include "sgfbram.hxx"
#include "sgvmain.hxx"
#include "sgvspln.hxx"
#include <unotools/ucbstreamhelper.hxx>
//#if OSL_DEBUG_LEVEL > 1
//#include "Debug.c"
//#endif
#define SWAPPOINT(p) { \
p.x=SWAPSHORT(p.x); \
p.y=SWAPSHORT(p.y); }
#define SWAPPAGE(p) { \
p.Next =SWAPLONG (p.Next ); \
p.nList =SWAPLONG (p.nList ); \
p.ListEnd=SWAPLONG (p.ListEnd); \
p.Paper.Size.x=SWAPSHORT(p.Paper.Size.x); \
p.Paper.Size.y=SWAPSHORT(p.Paper.Size.y); \
p.Paper.RandL =SWAPSHORT(p.Paper.RandL ); \
p.Paper.RandR =SWAPSHORT(p.Paper.RandR ); \
p.Paper.RandO =SWAPSHORT(p.Paper.RandO ); \
p.Paper.RandU =SWAPSHORT(p.Paper.RandU ); \
SWAPPOINT(p.U); \
sal_uInt16 iTemp; \
for (iTemp=0;iTemp<20;iTemp++) { \
rPage.HlpLnH[iTemp]=SWAPSHORT(rPage.HlpLnH[iTemp]); \
rPage.HlpLnV[iTemp]=SWAPSHORT(rPage.HlpLnV[iTemp]); }}
#define SWAPOBJK(o) { \
o.Last =SWAPLONG (o.Last ); \
o.Next =SWAPLONG (o.Next ); \
o.MemSize =SWAPSHORT(o.MemSize ); \
SWAPPOINT(o.ObjMin); \
SWAPPOINT(o.ObjMax); }
#define SWAPLINE(l) { \
l.LMSize=SWAPSHORT(l.LMSize); \
l.LDicke=SWAPSHORT(l.LDicke); }
#define SWAPAREA(a) { \
a.FDummy2=SWAPSHORT(a.FDummy2); \
a.FMuster=SWAPSHORT(a.FMuster); }
#define SWAPTEXT(t) { \
SWAPLINE(t.L); \
SWAPAREA(t.F); \
t.FontLo =SWAPSHORT(t.FontLo ); \
t.FontHi =SWAPSHORT(t.FontHi ); \
t.Grad =SWAPSHORT(t.Grad ); \
t.Breite =SWAPSHORT(t.Breite ); \
t.Schnitt=SWAPSHORT(t.Schnitt); \
t.LnFeed =SWAPSHORT(t.LnFeed ); \
t.Slant =SWAPSHORT(t.Slant ); \
SWAPLINE(t.ShdL); \
SWAPAREA(t.ShdF); \
SWAPPOINT(t.ShdVers); \
SWAPAREA(t.BackF); }
////////////////////////////////////////////////////////////////////////////////////////////////////
//
// Einschraenkungen:
//
// - Flaechenmuster werden den unter StarView verfuegbaren Mustern angenaehert.
// - Linienenden werden unter StarView immer rund dargestellt und gehen ueber
// den Endpunkt der Linie hinaus.
// - Linienmuster werden den unter StarView verfuegbaren Mustern angenaehert.
// Transparent/Opak wird zur Zeit noch nicht beruecksichtigt.
// - Keine gedrehten Ellipsen
//
//
//
//
////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
// Fuer Fontuebersetzung ///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
SgfFontLst* pSgfFonts = 0;
////////////////////////////////////////////////////////////////////////////////////////////////////
// Fuer Kreisunterarten, Text und gedrehte Rechtecke ///////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
void RotatePoint(PointType& P, sal_Int16 cx, sal_Int16 cy, double sn, double cs)
{
sal_Int16 dx,dy;
double x1,y1;
dx=P.x-cx;
dy=P.y-cy;
x1=dx*cs-dy*sn;
y1=dy*cs+dx*sn;
P.x=cx+sal_Int16(x1);
P.y=cy+sal_Int16(y1);
}
void RotatePoint(Point& P, sal_Int16 cx, sal_Int16 cy, double sn, double cs)
{
sal_Int16 dx,dy;
double x1,y1;
dx=(sal_Int16)(P.X()-cx);
dy=(sal_Int16)(P.Y()-cy);
x1=dx*cs-dy*sn;
y1=dy*cs+dx*sn;
P=Point(cx+sal_Int16(x1),cy+sal_Int16(y1));
}
sal_Int16 iMulDiv(sal_Int16 a, sal_Int16 Mul, sal_Int16 Div)
{
sal_Int32 Temp;
Temp=sal_Int32(a)*sal_Int32(Mul)/sal_Int32(Div);
return sal_Int16(Temp);
}
sal_uInt16 MulDiv(sal_uInt16 a, sal_uInt16 Mul, sal_uInt16 Div)
{
sal_uInt32 Temp;
Temp=sal_uInt32(a)*sal_uInt32(Mul)/sal_uInt32(Div);
return sal_uInt16(Temp);
}
////////////////////////////////////////////////////////////////////////////////////////////////////
// SgfFilterSDrw ///////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
SvStream& operator>>(SvStream& rIStream, DtHdType& rDtHd)
{
rIStream.Read((char*)&rDtHd.Reserved[0],DtHdSize);
return rIStream;
}
void DtHdOverSeek(SvStream& rInp)
{
sal_uLong FPos=rInp.Tell();
FPos+=(sal_uLong)DtHdSize;
rInp.Seek(FPos);
// rInp.seekg(rInp.tellg()+(sal_uLong)DtHdSize);
}
SvStream& operator>>(SvStream& rIStream, PageType& rPage)
{
rIStream.Read((char*)&rPage.Next,PageSize);
#if defined OSL_BIGENDIAN
SWAPPAGE(rPage);
#endif
return rIStream;
}
void ObjkOverSeek(SvStream& rInp, ObjkType& rObjk)
{
sal_uLong Siz;
Siz=(sal_uLong)rObjk.MemSize+rObjk.Last; // ObjSize+ObjAnhSize
rInp.Seek(rInp.Tell()+Siz);
}
SvStream& operator>>(SvStream& rInp, ObjkType& rObjk)
{ // Die Fileposition im Stream bleibt unveraendert!
sal_uLong nPos;
nPos=rInp.Tell();
rInp.Read((char*)&rObjk.Last,ObjkSize);
#if defined OSL_BIGENDIAN
SWAPOBJK(rObjk);
#endif
#ifdef InArbeit
sal_uLong nPos1=rInp.Tell();
if(nPos == nPos1) InfoBox( NULL, "tellg funkt nich" ).Execute();
#endif
rInp.Seek(nPos);
#ifdef InArbeit
if (rInp.Tell() != nPos) InfoBox( NULL, "seekg funkt nich" ).Execute();
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, StrkType& rStrk)
{
rInp.Read((char*)&rStrk.Last,StrkSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rStrk);
SWAPLINE (rStrk.L);
SWAPPOINT(rStrk.Pos1);
SWAPPOINT(rStrk.Pos2);
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, RectType& rRect)
{
rInp.Read((char*)&rRect.Last,RectSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rRect);
SWAPLINE (rRect.L);
SWAPAREA (rRect.F);
SWAPPOINT(rRect.Pos1);
SWAPPOINT(rRect.Pos2);
rRect.Radius =SWAPSHORT(rRect.Radius );
rRect.DrehWink=SWAPSHORT(rRect.DrehWink);
rRect.Slant =SWAPSHORT(rRect.Slant );
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, PolyType& rPoly)
{
rInp.Read((char*)&rPoly.Last,PolySize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rPoly);
SWAPLINE (rPoly.L);
SWAPAREA (rPoly.F);
// rPoly.EckP=SWAPLONG(rPoly.EckP);
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, SplnType& rSpln)
{
rInp.Read((char*)&rSpln.Last,SplnSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rSpln);
SWAPLINE (rSpln.L);
SWAPAREA (rSpln.F);
// rSpln.EckP=SWAPLONG(rSpln.EckP);
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, CircType& rCirc)
{
rInp.Read((char*)&rCirc.Last,CircSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rCirc);
SWAPLINE (rCirc.L);
SWAPAREA (rCirc.F);
SWAPPOINT(rCirc.Radius);
SWAPPOINT(rCirc.Center);
rCirc.DrehWink =SWAPSHORT(rCirc.DrehWink );
rCirc.StartWink=SWAPSHORT(rCirc.StartWink);
rCirc.RelWink =SWAPSHORT(rCirc.RelWink );
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, TextType& rText)
{
rInp.Read((char*)&rText.Last,TextSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rText);
SWAPTEXT (rText.T);
SWAPPOINT(rText.Pos1);
SWAPPOINT(rText.Pos2);
rText.TopOfs =SWAPSHORT(rText.TopOfs );
rText.DrehWink=SWAPSHORT(rText.DrehWink);
rText.BoxSlant=SWAPSHORT(rText.BoxSlant);
rText.BufSize =SWAPSHORT(rText.BufSize );
//rText.Buf =SWAPLONG (rText.Buf );
//rText.Ext =SWAPLONG (rText.Ext );
SWAPPOINT(rText.FitSize);
rText.FitBreit=SWAPSHORT(rText.FitBreit);
#endif
rText.Buffer=NULL;
return rInp;
}
SvStream& operator>>(SvStream& rInp, BmapType& rBmap)
{
rInp.Read((char*)&rBmap.Last,BmapSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rBmap);
SWAPAREA (rBmap.F);
SWAPPOINT(rBmap.Pos1);
SWAPPOINT(rBmap.Pos2);
rBmap.DrehWink=SWAPSHORT(rBmap.DrehWink);
rBmap.Slant =SWAPSHORT(rBmap.Slant );
SWAPPOINT(rBmap.PixSize);
#endif
return rInp;
}
SvStream& operator>>(SvStream& rInp, GrupType& rGrup)
{
rInp.Read((char*)&rGrup.Last,GrupSize);
#if defined OSL_BIGENDIAN
SWAPOBJK (rGrup);
rGrup.SbLo =SWAPSHORT(rGrup.SbLo );
rGrup.SbHi =SWAPSHORT(rGrup.SbHi );
rGrup.UpLo =SWAPSHORT(rGrup.UpLo );
rGrup.UpHi =SWAPSHORT(rGrup.UpHi );
rGrup.ChartSize=SWAPSHORT(rGrup.ChartSize);
rGrup.ChartPtr =SWAPLONG (rGrup.ChartPtr );
#endif
return rInp;
}
/*************************************************************************
|*
|* Sgv2SvFarbe()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
Color Sgv2SvFarbe(sal_uInt8 nFrb1, sal_uInt8 nFrb2, sal_uInt8 nInts)
{
sal_uInt16 r1=0,g1=0,b1=0,r2=0,g2=0,b2=0;
sal_uInt8 nInt2=100-nInts;
switch(nFrb1 & 0x07) {
case 0: r1=0xFF; g1=0xFF; b1=0xFF; break;
case 1: r1=0xFF; g1=0xFF; break;
case 2: g1=0xFF; b1=0xFF; break;
case 3: g1=0xFF; break;
case 4: r1=0xFF; b1=0xFF; break;
case 5: r1=0xFF; break;
case 6: b1=0xFF; break;
case 7: break;
}
switch(nFrb2 & 0x07) {
case 0: r2=0xFF; g2=0xFF; b2=0xFF; break;
case 1: r2=0xFF; g2=0xFF; break;
case 2: g2=0xFF; b2=0xFF; break;
case 3: g2=0xFF; break;
case 4: r2=0xFF; b2=0xFF; break;
case 5: r2=0xFF; break;
case 6: b2=0xFF; break;
case 7: break;
}
r1=(sal_uInt16)((sal_uInt32)r1*nInts/100+(sal_uInt32)r2*nInt2/100);
g1=(sal_uInt16)((sal_uInt32)g1*nInts/100+(sal_uInt32)g2*nInt2/100);
b1=(sal_uInt16)((sal_uInt32)b1*nInts/100+(sal_uInt32)b2*nInt2/100);
Color aColor( (sal_uInt8)r1, (sal_uInt8)g1, (sal_uInt8)b1 );
return aColor;
}
void SetLine(ObjLineType& rLine, OutputDevice& rOut)
{
/* !!!
PenStyle aStyle=PEN_SOLID;
switch(rLine.LMuster & 0x07) {
case 0: aStyle=PEN_NULL; break;
case 1: aStyle=PEN_SOLID; break;
case 2: aStyle=PEN_DOT; break; // . . . . . . . . . . . . . .
case 3: aStyle=PEN_DASH; break; // __ __ __ __ __ __ __ __ __
case 4: aStyle=PEN_DASH; break; // ___ ___ ___ ___ ___ ___ ___
case 5: aStyle=PEN_DASHDOT; break; // __ . __ . __ . __ . __ . __
case 6: aStyle=PEN_DASHDOT; break; // __ _ __ _ __ _ __ _ __ _ __
case 7: aStyle=PEN_DASHDOT; break; // ___ _ _ ___ _ _ ___ _ _ ___
}
Pen aPen(Sgv2SvFarbe(rLine.LFarbe,rLine.LBFarbe,rLine.LIntens),rLine.LDicke,aStyle);
SetPen(aPen,rOut);
*/
if( 0 == ( rLine.LMuster & 0x07 ) )
rOut.SetLineColor();
else
rOut.SetLineColor( Sgv2SvFarbe(rLine.LFarbe,rLine.LBFarbe,rLine.LIntens) );
}
void SetArea(ObjAreaType& rArea, OutputDevice& rOut)
{
/*
BrushStyle aStyle=BRUSH_SOLID;
switch(rArea.FMuster & 0x00FF) {
case 0: aStyle=BRUSH_NULL; break;
case 1: aStyle=BRUSH_SOLID; break;
case 2: case 4: case 6: case 8:
case 10: case 12: case 14: case 16:
case 43: case 45: aStyle=BRUSH_VERT; break;
case 3: case 5: case 7: case 9:
case 11: case 13: case 15: case 17:
case 42: case 44: aStyle=BRUSH_HORZ; break;
case 18: case 20: case 22: case 24:
case 26: case 28: case 30: case 32:
case 46: case 48: aStyle=BRUSH_UPDIAG; break;
case 19: case 21: case 23: case 25:
case 27: case 29: case 31: case 33:
case 47: case 49: aStyle=BRUSH_DOWNDIAG; break;
case 34: case 35: case 36: case 37: aStyle=BRUSH_CROSS; break;
case 38: case 39: case 40: case 41: aStyle=BRUSH_DIAGCROSS; break;
default: aStyle=BRUSH_DIAGCROSS; break;
}
Brush aBrush(Sgv2SvFarbe(rArea.FFarbe,rArea.FBFarbe,rArea.FIntens),aStyle);
aBrush.SetTransparent((rArea.FMuster & 0x80) !=0L);
SetBrush(aBrush,rOut);
*/
if( 0 == ( rArea.FMuster & 0x00FF ) )
rOut.SetFillColor();
else
rOut.SetFillColor( Sgv2SvFarbe( rArea.FFarbe,rArea.FBFarbe,rArea.FIntens ) );
}
/*************************************************************************
|*
|* ObjkType::DrawObjekt()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void ObjkType::Draw(OutputDevice&)
{
// ShowSDObjk(*this);
}
void Obj0Type::Draw(OutputDevice&) {}
/*************************************************************************
|*
|* StrkType::DrawObjekt()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void StrkType::Draw(OutputDevice& rOut)
{
SetLine(L,rOut);
rOut.DrawLine(Point(Pos1.x,Pos1.y),Point(Pos2.x,Pos2.y)); // !!!
}
/*************************************************************************
|*
|* RectType::DrawObjekt()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void SgfAreaColorIntens(sal_uInt16 Muster, sal_uInt8 Col1, sal_uInt8 Col2, sal_uInt8 Int, OutputDevice& rOut)
{
ObjAreaType F;
F.FMuster=Muster;
F.FFarbe=Col2;
F.FBFarbe=Col1;
F.FIntens=Int;
SetArea(F,rOut);
}
void DrawSlideRect(sal_Int16 x1, sal_Int16 y1, sal_Int16 x2, sal_Int16 y2, ObjAreaType& F, OutputDevice& rOut)
{
sal_Int16 i,i0,b,b0;
sal_Int16 Int1,Int2;
sal_Int16 Col1,Col2;
// ClipMerk: HgdClipRec;
sal_Int16 cx,cy;
sal_Int16 MaxR;
sal_Int32 dx,dy;
rOut.SetLineColor();
if (x1>x2) { i=x1; x1=x2; x2=i; }
if (y1>y2) { i=y1; y1=y2; y2=i; }
Col1=F.FBFarbe & 0x87; Col2=F.FFarbe & 0x87;
Int1=100-F.FIntens; Int2=F.FIntens;
if (Int1==Int2) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int2,rOut);
rOut.DrawRect(Rectangle(x1,y1,x2,y2));
} else {
b0=Int1;
switch (F.FBFarbe & 0x38) {
case 0x08: { // vertikal
i0=y1;
i=y1;
while (i<=y2) {
b=Int1+sal_Int16((sal_Int32)(Int2-Int1)*(sal_Int32)(i-y1) /(sal_Int32)(y2-y1+1));
if (b!=b0) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)b0,rOut);
rOut.DrawRect(Rectangle(x1,i0,x2,i-1));
i0=i; b0=b;
}
i++;
}
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int2,rOut);
rOut.DrawRect(Rectangle(x1,i0,x2,y2));
} break;
case 0x28: { // horizontal
i0=x1;
i=x1;
while (i<=x2) {
b=Int1+sal_Int16((sal_Int32)(Int2-Int1)*(sal_Int32)(i-x1) /(sal_Int32)(x2-x1+1));
if (b!=b0) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)b0,rOut);
rOut.DrawRect(Rectangle(i0,y1,i-1,y2));
i0=i; b0=b;
}
i++;
}
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int2,rOut);
rOut.DrawRect(Rectangle(i0,y1,x2,y2));
} break;
case 0x18: case 0x38: { // Kreis
Region ClipMerk=rOut.GetClipRegion();
double a;
rOut.SetClipRegion(Region(Rectangle(x1,y1,x2,y2)));
cx=(x1+x2) /2;
cy=(y1+y2) /2;
dx=x2-x1+1;
dy=y2-y1+1;
a=sqrt((double)(dx*dx+dy*dy));
MaxR=sal_Int16(a) /2 +1;
b0=Int2;
i0=MaxR; if (MaxR<1) MaxR=1;
i=MaxR;
while (i>=0) {
b=Int1+sal_Int16((sal_Int32(Int2-Int1)*sal_Int32(i)) /sal_Int32(MaxR));
if (b!=b0) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)b0,rOut);
//if (i0>200 || (Col1 & $80)!=0 || (Col2 & $80)!=0) {
// then begin { Fallunterscheidung fuer etwas bessere Performance }
// s2:=i0-i+2;
// SetPenSize(s2);
// s2:=s2 div 2;
// Circle(cx,cy,i0-s2,i0-s2);{}
// else
rOut.DrawEllipse(Rectangle(cx-i0,cy-i0,cx+i0,cy+i0));
i0=i; b0=b;
}
i--;
}
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int1,rOut);
rOut.DrawEllipse(Rectangle(cx-i0,cy-i0,cx+i0,cy+i0));
rOut.SetClipRegion(ClipMerk);
} break; // Kreis
}
}
}
void RectType::Draw(OutputDevice& rOut)
{
if (L.LMuster!=0) L.LMuster=1; // keine Linienmuster hier, nur an oder aus
SetArea(F,rOut);
if (DrehWink==0) {
if ((F.FBFarbe & 0x38)==0 || Radius!=0) {
SetLine(L,rOut);
rOut.DrawRect(Rectangle(Pos1.x,Pos1.y,Pos2.x,Pos2.y),Radius,Radius);
} else {
DrawSlideRect(Pos1.x,Pos1.y,Pos2.x,Pos2.y,F,rOut);
if (L.LMuster!=0) {
SetLine(L,rOut);
rOut.SetFillColor();
rOut.DrawRect(Rectangle(Pos1.x,Pos1.y,Pos2.x,Pos2.y));
}
}
} else {
Point aPts[4];
sal_uInt16 i;
double sn,cs;
sn=sin(double(DrehWink)*3.14159265359/18000);
cs=cos(double(DrehWink)*3.14159265359/18000);
aPts[0]=Point(Pos1.x,Pos1.y);
aPts[1]=Point(Pos2.x,Pos1.y);
aPts[2]=Point(Pos2.x,Pos2.y);
aPts[3]=Point(Pos1.x,Pos2.y);
for (i=0;i<4;i++) {
RotatePoint(aPts[i],Pos1.x,Pos1.y,sn,cs);
}
SetLine(L,rOut);
Polygon aPoly(4,aPts);
rOut.DrawPolygon(aPoly);
}
}
/*************************************************************************
|*
|* PolyType::Draw()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void PolyType::Draw(OutputDevice& rOut)
{
if ((Flags & PolyClosBit) !=0) SetArea(F,rOut);
SetLine(L,rOut);
Polygon aPoly(nPoints);
sal_uInt16 i;
for(i=0;i<nPoints;i++) aPoly.SetPoint(Point(EckP[i].x,EckP[i].y),i);
if ((Flags & PolyClosBit) !=0) {
rOut.DrawPolygon(aPoly);
} else {
rOut.DrawPolyLine(aPoly);
}
}
/*************************************************************************
|*
|* SplnType::Draw()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void SplnType::Draw(OutputDevice& rOut)
{
if ((Flags & PolyClosBit) !=0) SetArea(F,rOut);
SetLine(L,rOut);
Polygon aPoly(0);
Polygon aSpln(nPoints);
sal_uInt16 i;
for(i=0;i<nPoints;i++) aSpln.SetPoint(Point(EckP[i].x,EckP[i].y),i);
if ((Flags & PolyClosBit) !=0) {
Spline2Poly(aSpln,sal_True,aPoly);
if (aPoly.GetSize()>0) rOut.DrawPolygon(aPoly);
} else {
Spline2Poly(aSpln,sal_False,aPoly);
if (aPoly.GetSize()>0) rOut.DrawPolyLine(aPoly);
}
}
/*************************************************************************
|*
|* CircType::Draw()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void DrawSlideCirc(sal_Int16 cx, sal_Int16 cy, sal_Int16 rx, sal_Int16 ry, ObjAreaType& F, OutputDevice& rOut)
{
sal_Int16 x1=cx-rx;
sal_Int16 y1=cy-ry;
sal_Int16 x2=cx+rx;
sal_Int16 y2=cy+ry;
sal_Int16 i,i0,b,b0;
sal_Int16 Int1,Int2;
sal_Int16 Col1,Col2;
rOut.SetLineColor();
Col1=F.FBFarbe & 0x87; Col2=F.FFarbe & 0x87;
Int1=100-F.FIntens; Int2=F.FIntens;
if (Int1==Int2) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int2,rOut);
rOut.DrawEllipse(Rectangle(x1,y1,x2,y2));
} else {
b0=Int1;
switch (F.FBFarbe & 0x38) {
case 0x08: { // vertikal
Region ClipMerk=rOut.GetClipRegion();
i0=y1;
i=y1;
while (i<=y2) {
b=Int1+sal_Int16((sal_Int32)(Int2-Int1)*(sal_Int32)(i-y1) /(sal_Int32)(y2-y1+1));
if (b!=b0) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)b0,rOut);
rOut.SetClipRegion(Rectangle(x1,i0,x2,i-1));
rOut.DrawEllipse(Rectangle(x1,y1,x2,y2));
i0=i; b0=b;
}
i++;
}
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int2,rOut);
rOut.SetClipRegion(Rectangle(x1,i0,x2,y2));
rOut.DrawEllipse(Rectangle(x1,y1,x2,y2));
rOut.SetClipRegion(ClipMerk);
} break;
case 0x28: { // horizontal
Region ClipMerk=rOut.GetClipRegion();
i0=x1;
i=x1;
while (i<=x2) {
b=Int1+sal_Int16((sal_Int32)(Int2-Int1)*(sal_Int32)(i-x1) /(sal_Int32)(x2-x1+1));
if (b!=b0) {
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)b0,rOut);
rOut.SetClipRegion(Rectangle(i0,y1,i-1,y2));
rOut.DrawEllipse(Rectangle(x1,y1,x2,y2));
i0=i; b0=b;
}
i++;
}
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int2,rOut);
rOut.SetClipRegion(Rectangle(i0,y1,x2,y2));
rOut.DrawEllipse(Rectangle(x1,y1,x2,y2));
rOut.SetClipRegion(ClipMerk);
} break;
case 0x18: case 0x38: { // Kreis
sal_Int16 MaxR;
if (rx<1) rx=1;
if (ry<1) ry=1;
MaxR=rx;
b0=Int2;
i0=MaxR; if (MaxR<1) MaxR=1;
i=MaxR;
while (i>=0) {
b=Int1+sal_Int16((sal_Int32(Int2-Int1)*sal_Int32(i)) /sal_Int32(MaxR));
if (b!=b0) {
sal_Int32 temp=sal_Int32(i0)*sal_Int32(ry)/sal_Int32(rx);
sal_Int16 j0=sal_Int16(temp);
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)b0,rOut);
rOut.DrawEllipse(Rectangle(cx-i0,cy-j0,cx+i0,cy+j0));
i0=i; b0=b;
}
i--;
}
SgfAreaColorIntens(F.FMuster,(sal_uInt8)Col1,(sal_uInt8)Col2,(sal_uInt8)Int1,rOut);
rOut.DrawEllipse(Rectangle(cx-i0,cy-i0,cx+i0,cy+i0));
} break; // Kreis
}
}
}
void CircType::Draw(OutputDevice& rOut)
{
Rectangle aRect(Center.x-Radius.x,Center.y-Radius.y,Center.x+Radius.x,Center.y+Radius.y);
if (L.LMuster!=0) L.LMuster=1; // keine Linienmuster hier, nur an oder aus
SetArea(F,rOut);
if ((Flags & 0x03)==CircFull) {
if ((F.FBFarbe & 0x38)==0) {
SetLine(L,rOut);
rOut.DrawEllipse(aRect);
} else {
DrawSlideCirc(Center.x,Center.y,Radius.x,Radius.y,F,rOut);
if (L.LMuster!=0) {
SetLine(L,rOut);
rOut.SetFillColor();
rOut.DrawEllipse(aRect);
}
}
} else {
PointType a,b;
Point aStrt,aEnde;
double sn,cs;
a.x=Center.x+Radius.x; a.y=Center.y; b=a;
sn=sin(double(StartWink)*3.14159265359/18000);
cs=cos(double(StartWink)*3.14159265359/18000);
RotatePoint(a,Center.x,Center.y,sn,cs);
sn=sin(double(StartWink+RelWink)*3.14159265359/18000);
cs=cos(double(StartWink+RelWink)*3.14159265359/18000);
RotatePoint(b,Center.x,Center.y,sn,cs);
if (Radius.x!=Radius.y) {
if (Radius.x<1) Radius.x=1;
if (Radius.y<1) Radius.y=1;
a.y = a.y - Center.y;
b.y = b.y - Center.y;
a.y=iMulDiv(a.y,Radius.y,Radius.x);
b.y=iMulDiv(b.y,Radius.y,Radius.x);
a.y = a.y + Center.y;
b.y = b.y + Center.y;
}
aStrt=Point(a.x,a.y);
aEnde=Point(b.x,b.y);
SetLine(L,rOut);
switch (Flags & 0x03) {
case CircArc : rOut.DrawArc(aRect,aEnde,aStrt); break;
case CircSect:
case CircAbsn: rOut.DrawPie(aRect,aEnde,aStrt); break;
}
}
}
/*************************************************************************
|*
|* BmapType::Draw()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void BmapType::Draw(OutputDevice& rOut)
{
//ifstream aInp;
unsigned char nSgfTyp;
sal_uInt16 nVersion;
String aStr(
reinterpret_cast< char const * >(&Filename[ 1 ]),
(xub_StrLen)Filename[ 0 ], RTL_TEXTENCODING_UTF8 );
INetURLObject aFNam( aStr );
SvStream* pInp = ::utl::UcbStreamHelper::CreateStream( aFNam.GetMainURL( INetURLObject::NO_DECODE ), STREAM_READ );
if ( pInp )
{
nSgfTyp=CheckSgfTyp( *pInp,nVersion);
switch(nSgfTyp) {
case SGF_BITIMAGE: {
GraphicFilter aFlt;
Graphic aGrf;
sal_uInt16 nRet;
nRet=aFlt.ImportGraphic(aGrf,aFNam);
aGrf.Draw(&rOut,Point(Pos1.x,Pos1.y),Size(Pos2.x-Pos1.x,Pos2.y-Pos1.y));
} break;
case SGF_SIMPVECT: {
GDIMetaFile aMtf;
SgfVectXofs=Pos1.x;
SgfVectYofs=Pos1.y;
SgfVectXmul=Pos2.x-Pos1.x;
SgfVectYmul=Pos2.y-Pos1.y;
SgfVectXdiv=0;
SgfVectYdiv=0;
SgfVectScal=sal_True;
SgfVectFilter(*pInp,aMtf);
SgfVectXofs=0;
SgfVectYofs=0;
SgfVectXmul=0;
SgfVectYmul=0;
SgfVectXdiv=0;
SgfVectYdiv=0;
SgfVectScal=sal_False;
aMtf.Play(&rOut);
} break;
}
delete pInp;
}
}
/*************************************************************************
|*
|* GrupType::...
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
sal_uInt32 GrupType::GetSubPtr()
{
return sal_uInt32(SbLo)+0x00010000*sal_uInt32(SbHi);
}
/*************************************************************************
|*
|* DrawObjkList()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void DrawObjkList( SvStream& rInp, OutputDevice& rOut )
{
ObjkType aObjk;
sal_uInt16 nGrpCnt=0;
sal_Bool bEnde=sal_False;
do {
rInp>>aObjk;
if (!rInp.GetError()) {
switch(aObjk.Art) {
case ObjStrk: { StrkType aStrk; rInp>>aStrk; if (!rInp.GetError()) aStrk.Draw(rOut); } break;
case ObjRect: { RectType aRect; rInp>>aRect; if (!rInp.GetError()) aRect.Draw(rOut); } break;
case ObjCirc: { CircType aCirc; rInp>>aCirc; if (!rInp.GetError()) aCirc.Draw(rOut); } break;
case ObjText: {
TextType aText;
rInp>>aText;
if (!rInp.GetError()) {
aText.Buffer=new UCHAR[aText.BufSize+1]; // Ein mehr fuer LookAhead bei CK-Trennung
rInp.Read((char* )aText.Buffer,aText.BufSize);
if (!rInp.GetError()) aText.Draw(rOut);
delete[] aText.Buffer;
}
} break;
case ObjBmap: {
BmapType aBmap;
rInp>>aBmap;
if (!rInp.GetError()) {
aBmap.Draw(rOut);
}
} break;
case ObjPoly: {
PolyType aPoly;
rInp>>aPoly;
if (!rInp.GetError()) {
aPoly.EckP=new PointType[aPoly.nPoints];
rInp.Read((char*)aPoly.EckP,4*aPoly.nPoints);
#if defined OSL_BIGENDIAN
for(short i=0;i<aPoly.nPoints;i++) SWAPPOINT(aPoly.EckP[i]);
#endif
if (!rInp.GetError()) aPoly.Draw(rOut);
delete[] aPoly.EckP;
}
} break;
case ObjSpln: {
SplnType aSpln;
rInp>>aSpln;
if (!rInp.GetError()) {
aSpln.EckP=new PointType[aSpln.nPoints];
rInp.Read((char*)aSpln.EckP,4*aSpln.nPoints);
#if defined OSL_BIGENDIAN
for(short i=0;i<aSpln.nPoints;i++) SWAPPOINT(aSpln.EckP[i]);
#endif
if (!rInp.GetError()) aSpln.Draw(rOut);
delete[] aSpln.EckP;
}
} break;
case ObjGrup: {
GrupType aGrup;
rInp>>aGrup;
if (!rInp.GetError()) {
rInp.Seek(rInp.Tell()+aGrup.Last); // Obj-Anhaengsel
if(aGrup.GetSubPtr()!=0L) nGrpCnt++;// DrawObjkList(rInp,rOut );
}
} break;
default: {
aObjk.Draw(rOut); // Objektbezeichnung auf 2. Screen
ObjkOverSeek(rInp,aObjk); // zum naechsten Objekt
}
}
} // if rInp
if (!rInp.GetError()) {
if (aObjk.Next==0L) {
if (nGrpCnt==0) bEnde=sal_True;
else nGrpCnt--;
}
} else {
bEnde=sal_True; // Lesefehler
}
} while (!bEnde);
}
/*************************************************************************
|*
|* SkipObjkList()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
void SkipObjkList(SvStream& rInp)
{
ObjkType aObjk;
do
{
rInp>>aObjk;
if(aObjk.Art==ObjGrup) {
GrupType aGrup;
rInp>>aGrup;
rInp.Seek(rInp.Tell()+aGrup.Last); // Obj-Anhaengsel
if(aGrup.GetSubPtr()!=0L) SkipObjkList(rInp);
} else {
ObjkOverSeek(rInp,aObjk); // zum naechsten Objekt
}
} while (aObjk.Next!=0L && !rInp.GetError());
}
/*************************************************************************
|*
|* SgfFilterSDrw()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
sal_Bool SgfFilterSDrw( SvStream& rInp, SgfHeader&, SgfEntry&, GDIMetaFile& rMtf )
{
sal_Bool bRet = sal_False;
PageType aPage;
VirtualDevice aOutDev;
OutputDevice* pOutDev;
sal_uLong nStdPos;
sal_uLong nZchPos;
sal_uInt16 Num;
pOutDev=&aOutDev;
DtHdOverSeek(rInp); // DataHeader weglesen
nStdPos=rInp.Tell();
do { // Standardseiten weglesen
rInp>>aPage;
if (aPage.nList!=0) SkipObjkList(rInp);
} while (aPage.Next!=0L && !rInp.GetError());
// ShowMsg("Zeichnungseite(n)\n");
nZchPos=rInp.Tell();
rInp>>aPage;
rMtf.Record(pOutDev);
Num=aPage.StdPg;
if (Num!=0) {
rInp.Seek(nStdPos);
while(Num>1 && aPage.Next!=0L && !rInp.GetError()) { // Standardseite suchen
rInp>>aPage;
if (aPage.nList!=0) SkipObjkList(rInp);
Num--;
}
rInp>>aPage;
if(Num==1 && aPage.nList!=0L) DrawObjkList( rInp,*pOutDev );
rInp.Seek(nZchPos);
nZchPos=rInp.Tell();
rInp>>aPage;
}
if (aPage.nList!=0L) DrawObjkList(rInp,*pOutDev );
rMtf.Stop();
rMtf.WindStart();
MapMode aMap(MAP_10TH_MM,Point(),Fraction(1,4),Fraction(1,4));
rMtf.SetPrefMapMode(aMap);
rMtf.SetPrefSize(Size((sal_Int16)aPage.Paper.Size.x,(sal_Int16)aPage.Paper.Size.y));
bRet=sal_True;
return bRet;
}
/*************************************************************************
|*
|* SgfSDrwFilter()
|*
|* Beschreibung
|* Ersterstellung JOE 23.06.93
|* Letzte Aenderung JOE 23.06.93
|*
*************************************************************************/
sal_Bool SgfSDrwFilter(SvStream& rInp, GDIMetaFile& rMtf, INetURLObject aIniPath )
{
#if OSL_DEBUG_LEVEL > 1 // Recordgroessen checken. Neuer Compiler hat vielleichte anderes Alignment!
if (sizeof(ObjTextType)!=ObjTextTypeSize) return sal_False;
#endif
sal_uLong nFileStart; // Offset des SgfHeaders. Im allgemeinen 0.
SgfHeader aHead;
SgfEntry aEntr;
sal_uLong nNext;
sal_Bool bRdFlag=sal_False; // Grafikentry gelesen ?
sal_Bool bRet=sal_False; // Returncode
aIniPath.Append( String::CreateFromAscii( "sgf.ini", 7 ) );
// aIniPath.ToAbs();
pSgfFonts = new SgfFontLst;
pSgfFonts->AssignFN( aIniPath.GetMainURL( INetURLObject::NO_DECODE ) );
nFileStart=rInp.Tell();
rInp>>aHead;
if (aHead.ChkMagic() && aHead.Typ==SgfStarDraw && aHead.Version==SGV_VERSION) {
nNext=aHead.GetOffset();
while (nNext && !bRdFlag && !rInp.GetError()) {
rInp.Seek(nFileStart+nNext);
rInp>>aEntr;
nNext=aEntr.GetOffset();
if (aEntr.Typ==aHead.Typ) {
bRet=SgfFilterSDrw( rInp,aHead,aEntr,rMtf );
}
} // while(nNext)
if (bRdFlag) {
if (!rInp.GetError()) bRet=sal_True; // Scheinbar Ok
}
}
delete pSgfFonts;
return(bRet);
}
/*
Bitmap Dither(sal_uInt8 Intens)
{
Bitmap aBmp;
BmpInfoHeader Info;
const dmatrix: array[0..7,0..7] of byte =
(( 0, 48, 12, 60, 3, 51, 15, 63 ),
( 32, 16, 44, 28, 35, 19, 47, 31 ),
( 8, 56, 4, 52, 11, 59, 7, 55 ),
( 40, 24, 36, 20, 43, 27, 39, 23 ),
( 2, 50, 14, 62, 1, 49, 13, 61 ),
( 34, 18, 46, 30, 33, 17, 45, 29 ),
( 10, 58, 6, 54, 9, 57, 5, 53 ),
( 42, 26, 38, 22, 41, 25, 37, 21 ));
cmatrix: array[0..7,0..7] of byte;
dmatrixn,dmatrixi: array[0..7] of byte;
procedure SetColorIntens(col0,col1,bal: integer);
var cmatrix0: array[0..63] of byte absolute cmatrix;
dmatrix0: array[0..63] of byte absolute dmatrix;
n,i: integer;
b,bit: byte;
begin
if col0=col1 then bal:=0;
if bal<=32 then
begin
plotcolor0:=col0 and $1F; plotcolor1:=col1 and $1F;
plotbal:=bal;
end
else
begin
plotcolor0:=col1 and $1F; plotcolor1:=col0 and $1F;
plotbal:=64-bal;
end;
for n:=0 to 63 do
if plotbal<=dmatrix0[n] then cmatrix0[n]:=col0 else cmatrix0[n]:=col1;
end;
*/