| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_svtools.hxx" |
| //_________________________________________________________________________________________________________________ |
| // includes |
| //_________________________________________________________________________________________________________________ |
| |
| #include <svtools/miscopt.hxx> |
| #include <unotools/configmgr.hxx> |
| #include <unotools/configitem.hxx> |
| #include <tools/debug.hxx> |
| #include <com/sun/star/uno/Any.hxx> |
| #include <com/sun/star/uno/Sequence.hxx> |
| #include <tools/link.hxx> |
| #include <tools/list.hxx> |
| #include <tools/wldcrd.hxx> |
| #include <tools/urlobj.hxx> |
| |
| #include <rtl/logfile.hxx> |
| #include "itemholder2.hxx" |
| |
| #include <svtools/imgdef.hxx> |
| #include <vcl/svapp.hxx> |
| |
| //_________________________________________________________________________________________________________________ |
| // namespaces |
| //_________________________________________________________________________________________________________________ |
| |
| using namespace ::utl ; |
| using namespace ::rtl ; |
| using namespace ::osl ; |
| using namespace ::com::sun::star::uno ; |
| using namespace ::com::sun::star; |
| |
| //_________________________________________________________________________________________________________________ |
| // const |
| //_________________________________________________________________________________________________________________ |
| |
| #define ASCII_STR(s) OUString( RTL_CONSTASCII_USTRINGPARAM(s) ) |
| #define ROOTNODE_MISC ASCII_STR("Office.Common/Misc") |
| #define DEFAULT_PLUGINSENABLED sal_True; |
| |
| #define PROPERTYNAME_PLUGINSENABLED ASCII_STR("PluginsEnabled") |
| #define PROPERTYHANDLE_PLUGINSENABLED 0 |
| #define PROPERTYNAME_SYMBOLSET ASCII_STR("SymbolSet") |
| #define PROPERTYHANDLE_SYMBOLSET 1 |
| #define PROPERTYNAME_TOOLBOXSTYLE ASCII_STR("ToolboxStyle") |
| #define PROPERTYHANDLE_TOOLBOXSTYLE 2 |
| #define PROPERTYNAME_USESYSTEMFILEDIALOG ASCII_STR("UseSystemFileDialog") |
| #define PROPERTYHANDLE_USESYSTEMFILEDIALOG 3 |
| #define PROPERTYNAME_SYMBOLSTYLE ASCII_STR("SymbolStyle") |
| #define PROPERTYHANDLE_SYMBOLSTYLE 4 |
| #define PROPERTYNAME_USESYSTEMPRINTDIALOG ASCII_STR("UseSystemPrintDialog") |
| #define PROPERTYHANDLE_USESYSTEMPRINTDIALOG 5 |
| |
| #define PROPERTYCOUNT 6 |
| |
| #define VCL_TOOLBOX_STYLE_FLAT ((sal_uInt16)0x0004) // from <vcl/toolbox.hxx> |
| |
| DECLARE_LIST( LinkList, Link * ) |
| |
| //_________________________________________________________________________________________________________________ |
| // private declarations! |
| //_________________________________________________________________________________________________________________ |
| |
| class SvtMiscOptions_Impl : public ConfigItem |
| { |
| //------------------------------------------------------------------------------------------------------------- |
| // private member |
| //------------------------------------------------------------------------------------------------------------- |
| |
| private: |
| LinkList aList; |
| sal_Bool m_bUseSystemFileDialog; |
| sal_Bool m_bIsUseSystemFileDialogRO; |
| sal_Bool m_bPluginsEnabled; |
| sal_Bool m_bIsPluginsEnabledRO; |
| sal_Int16 m_nSymbolsSize; |
| sal_Bool m_bIsSymbolsSizeRO; |
| sal_Bool m_bIsSymbolsStyleRO; |
| sal_Int16 m_nToolboxStyle; |
| sal_Bool m_bIsToolboxStyleRO; |
| sal_Bool m_bUseSystemPrintDialog; |
| sal_Bool m_bIsUseSystemPrintDialogRO; |
| |
| //------------------------------------------------------------------------------------------------------------- |
| // public methods |
| //------------------------------------------------------------------------------------------------------------- |
| |
| public: |
| |
| //--------------------------------------------------------------------------------------------------------- |
| // constructor / destructor |
| //--------------------------------------------------------------------------------------------------------- |
| |
| SvtMiscOptions_Impl(); |
| ~SvtMiscOptions_Impl(); |
| |
| //--------------------------------------------------------------------------------------------------------- |
| // overloaded methods of baseclass |
| //--------------------------------------------------------------------------------------------------------- |
| |
| /*-****************************************************************************************************//** |
| @short called for notify of configmanager |
| @descr These method is called from the ConfigManager before application ends or from the |
| PropertyChangeListener if the sub tree broadcasts changes. You must update your |
| internal values. |
| |
| @seealso baseclass ConfigItem |
| |
| @param "seqPropertyNames" is the list of properties which should be updated. |
| @return - |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| virtual void Notify( const Sequence< OUString >& seqPropertyNames ); |
| |
| /** loads required data from the configuration. It's called in the constructor to |
| read all entries and form ::Notify to re-read changed settings |
| |
| */ |
| void Load( const Sequence< OUString >& rPropertyNames ); |
| |
| /*-****************************************************************************************************//** |
| @short write changes to configuration |
| @descr These method writes the changed values into the sub tree |
| and should always called in our destructor to guarantee consistency of config data. |
| |
| @seealso baseclass ConfigItem |
| |
| @param - |
| @return - |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| virtual void Commit(); |
| |
| //--------------------------------------------------------------------------------------------------------- |
| // public interface |
| //--------------------------------------------------------------------------------------------------------- |
| |
| inline sal_Bool UseSystemFileDialog() const |
| { return m_bUseSystemFileDialog; } |
| |
| inline void SetUseSystemFileDialog( sal_Bool bSet ) |
| { m_bUseSystemFileDialog = bSet; SetModified(); } |
| |
| inline sal_Bool IsUseSystemFileDialogReadOnly() const |
| { return m_bIsUseSystemFileDialogRO; } |
| |
| inline sal_Bool IsPluginsEnabled() const |
| { return m_bPluginsEnabled; } |
| |
| void SetPluginsEnabled( sal_Bool bEnable ); |
| |
| inline sal_Bool IsPluginsEnabledReadOnly() const |
| { return m_bIsPluginsEnabledRO; } |
| |
| inline sal_Int16 GetSymbolsSize() |
| { return m_nSymbolsSize; } |
| |
| void SetSymbolsSize( sal_Int16 nSet ); |
| |
| inline sal_Bool IsGetSymbolsSizeReadOnly() |
| { return m_bIsSymbolsSizeRO; } |
| |
| sal_Int16 GetSymbolsStyle() const; |
| ::rtl::OUString GetSymbolsStyleName() const; |
| sal_Int16 GetCurrentSymbolsStyle() const; |
| |
| inline void SetSymbolsStyle( sal_Int16 nSet ) |
| { ImplSetSymbolsStyle( true, nSet, ::rtl::OUString() ); } |
| |
| inline void SetSymbolsStyleName( ::rtl::OUString &rName ) |
| { ImplSetSymbolsStyle( false, 0, rName ); } |
| |
| inline sal_Bool IsGetSymbolsStyleReadOnly() |
| { return m_bIsSymbolsStyleRO; } |
| |
| // translate to VCL settings ( "0" = 3D, "1" = FLAT ) |
| inline sal_Int16 GetToolboxStyle() |
| { return m_nToolboxStyle ? VCL_TOOLBOX_STYLE_FLAT : 0; } |
| |
| // translate from VCL settings |
| void SetToolboxStyle( sal_Int16 nStyle, bool _bSetModified ); |
| |
| inline sal_Bool IsGetToolboxStyleReadOnly() |
| { return m_bIsToolboxStyleRO; } |
| |
| inline sal_Bool UseSystemPrintDialog() const |
| { return m_bUseSystemPrintDialog; } |
| |
| inline void SetUseSystemPrintDialog( sal_Bool bSet ) |
| { m_bUseSystemPrintDialog = bSet; SetModified(); } |
| |
| inline sal_Bool IsUseSystemPrintDialogReadOnly() const |
| { return m_bIsUseSystemPrintDialogRO; } |
| |
| void AddListenerLink( const Link& rLink ); |
| void RemoveListenerLink( const Link& rLink ); |
| void CallListeners(); |
| |
| //------------------------------------------------------------------------------------------------------------- |
| // private methods |
| //------------------------------------------------------------------------------------------------------------- |
| |
| private: |
| |
| /*-****************************************************************************************************//** |
| @short return list of key names of ouer configuration management which represent oue module tree |
| @descr These methods return a static const list of key names. We need it to get needed values from our |
| configuration management. |
| |
| @seealso - |
| |
| @param - |
| @return A list of needed configuration keys is returned. |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| static Sequence< OUString > GetPropertyNames(); |
| |
| protected: |
| void ImplSetSymbolsStyle( bool bValue, sal_Int16 nSet, const ::rtl::OUString &rName ); |
| }; |
| |
| //***************************************************************************************************************** |
| // constructor |
| //***************************************************************************************************************** |
| SvtMiscOptions_Impl::SvtMiscOptions_Impl() |
| // Init baseclasses first |
| : ConfigItem( ROOTNODE_MISC ) |
| |
| , m_bUseSystemFileDialog( sal_False ) |
| , m_bIsUseSystemFileDialogRO( sal_False ) |
| , m_bPluginsEnabled( sal_False ) |
| , m_bIsPluginsEnabledRO( sal_False ) |
| , m_nSymbolsSize( 0 ) |
| , m_bIsSymbolsSizeRO( sal_False ) |
| , m_bIsSymbolsStyleRO( sal_False ) |
| , m_nToolboxStyle( 1 ) |
| , m_bIsToolboxStyleRO( sal_False ) |
| , m_bUseSystemPrintDialog( sal_False ) |
| , m_bIsUseSystemPrintDialogRO( sal_False ) |
| |
| { |
| // Use our static list of configuration keys to get his values. |
| Sequence< OUString > seqNames = GetPropertyNames ( ); |
| Load( seqNames ); |
| Sequence< Any > seqValues = GetProperties ( seqNames ); |
| Sequence< sal_Bool > seqRO = GetReadOnlyStates ( seqNames ); |
| |
| // Safe impossible cases. |
| // We need values from ALL configuration keys. |
| // Follow assignment use order of values in relation to our list of key names! |
| DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtMiscOptions_Impl::SvtMiscOptions_Impl()\nI miss some values of configuration keys!\n" ); |
| |
| // Copy values from list in right order to ouer internal member. |
| sal_Int32 nPropertyCount = seqValues.getLength(); |
| for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty ) |
| { |
| // Safe impossible cases. |
| // Check any for valid value. |
| DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nInvalid property value detected!\n" ); |
| switch( nProperty ) |
| { |
| case PROPERTYHANDLE_PLUGINSENABLED : |
| { |
| if( !(seqValues[nProperty] >>= m_bPluginsEnabled) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\PluginsEnabled\"!" ); |
| } |
| m_bIsPluginsEnabledRO = seqRO[nProperty]; |
| break; |
| } |
| |
| case PROPERTYHANDLE_SYMBOLSET : |
| { |
| if( !(seqValues[nProperty] >>= m_nSymbolsSize) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\SymbolSet\"!" ); |
| } |
| m_bIsSymbolsSizeRO = seqRO[nProperty]; |
| break; |
| } |
| |
| case PROPERTYHANDLE_TOOLBOXSTYLE : |
| { |
| if( !(seqValues[nProperty] >>= m_nToolboxStyle) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\ToolboxStyle\"!" ); |
| } |
| m_bIsToolboxStyleRO = seqRO[nProperty]; |
| break; |
| } |
| |
| case PROPERTYHANDLE_USESYSTEMFILEDIALOG : |
| { |
| if( !(seqValues[nProperty] >>= m_bUseSystemFileDialog) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\UseSystemFileDialog\"!" ); |
| } |
| m_bIsUseSystemFileDialogRO = seqRO[nProperty]; |
| break; |
| } |
| |
| case PROPERTYHANDLE_USESYSTEMPRINTDIALOG : |
| { |
| if( !(seqValues[nProperty] >>= m_bUseSystemPrintDialog) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\UseSystemPrintDialog\"!" ); |
| } |
| m_bIsUseSystemPrintDialogRO = seqRO[nProperty]; |
| break; |
| } |
| |
| case PROPERTYHANDLE_SYMBOLSTYLE : |
| { |
| ::rtl::OUString aSymbolsStyle; |
| if( seqValues[nProperty] >>= aSymbolsStyle ) |
| SetSymbolsStyleName( aSymbolsStyle ); |
| else |
| { |
| DBG_ERROR("Wrong type of \"Misc\\SymbolStyle\"!" ); |
| } |
| m_bIsSymbolsStyleRO = seqRO[nProperty]; |
| break; |
| } |
| } |
| } |
| |
| // Enable notification mechanism of ouer baseclass. |
| // We need it to get information about changes outside these class on ouer used configuration keys! |
| EnableNotification( seqNames ); |
| } |
| |
| //***************************************************************************************************************** |
| // destructor |
| //***************************************************************************************************************** |
| SvtMiscOptions_Impl::~SvtMiscOptions_Impl() |
| { |
| // We must save our current values .. if user forget it! |
| if( IsModified() == sal_True ) |
| { |
| Commit(); |
| } |
| |
| for ( sal_uInt16 n=0; n<aList.Count(); ) |
| delete aList.Remove(n); |
| } |
| |
| /*-- 25.02.2005 13:22:04--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| static int lcl_MapPropertyName( const ::rtl::OUString rCompare, |
| const uno::Sequence< ::rtl::OUString>& aInternalPropertyNames) |
| { |
| for(int nProp = 0; nProp < aInternalPropertyNames.getLength(); ++nProp) |
| { |
| if( aInternalPropertyNames[nProp] == rCompare ) |
| return nProp; |
| } |
| return -1; |
| } |
| |
| void SvtMiscOptions_Impl::Load( const Sequence< OUString >& rPropertyNames ) |
| { |
| const uno::Sequence< ::rtl::OUString> aInternalPropertyNames( GetPropertyNames()); |
| Sequence< Any > seqValues = GetProperties( rPropertyNames ); |
| |
| // Safe impossible cases. |
| // We need values from ALL configuration keys. |
| // Follow assignment use order of values in relation to our list of key names! |
| DBG_ASSERT( !(rPropertyNames.getLength()!=seqValues.getLength()), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nI miss some values of configuration keys!\n" ); |
| |
| // Copy values from list in right order to ouer internal member. |
| sal_Int32 nPropertyCount = seqValues.getLength(); |
| for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty ) |
| { |
| // Safe impossible cases. |
| // Check any for valid value. |
| DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nInvalid property value detected!\n" ); |
| switch( lcl_MapPropertyName(rPropertyNames[nProperty], aInternalPropertyNames) ) |
| { |
| case PROPERTYHANDLE_PLUGINSENABLED : { |
| if( !(seqValues[nProperty] >>= m_bPluginsEnabled) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\PluginsEnabled\"!" ); |
| } |
| } |
| break; |
| case PROPERTYHANDLE_SYMBOLSET : { |
| if( !(seqValues[nProperty] >>= m_nSymbolsSize) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\SymbolSet\"!" ); |
| } |
| } |
| break; |
| case PROPERTYHANDLE_TOOLBOXSTYLE : { |
| if( !(seqValues[nProperty] >>= m_nToolboxStyle) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\ToolboxStyle\"!" ); |
| } |
| } |
| break; |
| case PROPERTYHANDLE_USESYSTEMFILEDIALOG : { |
| if( !(seqValues[nProperty] >>= m_bUseSystemFileDialog) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\UseSystemFileDialog\"!" ); |
| } |
| } |
| break; |
| case PROPERTYHANDLE_USESYSTEMPRINTDIALOG : { |
| if( !(seqValues[nProperty] >>= m_bUseSystemPrintDialog) ) |
| { |
| DBG_ERROR("Wrong type of \"Misc\\UseSystemPrintDialog\"!" ); |
| } |
| } |
| break; |
| case PROPERTYHANDLE_SYMBOLSTYLE : { |
| ::rtl::OUString aSymbolsStyle; |
| if( seqValues[nProperty] >>= aSymbolsStyle ) |
| SetSymbolsStyleName( aSymbolsStyle ); |
| else |
| { |
| DBG_ERROR("Wrong type of \"Misc\\SymbolStyle\"!" ); |
| } |
| } |
| break; |
| } |
| } |
| } |
| |
| void SvtMiscOptions_Impl::AddListenerLink( const Link& rLink ) |
| { |
| aList.Insert( new Link( rLink ) ); |
| } |
| |
| void SvtMiscOptions_Impl::RemoveListenerLink( const Link& rLink ) |
| { |
| for ( sal_uInt16 n=0; n<aList.Count(); n++ ) |
| { |
| if ( (*aList.GetObject(n) ) == rLink ) |
| { |
| delete aList.Remove(n); |
| break; |
| } |
| } |
| } |
| |
| void SvtMiscOptions_Impl::CallListeners() |
| { |
| for ( sal_uInt16 n = 0; n < aList.Count(); ++n ) |
| aList.GetObject(n)->Call( this ); |
| } |
| |
| void SvtMiscOptions_Impl::SetToolboxStyle( sal_Int16 nStyle, bool _bSetModified ) |
| { |
| m_nToolboxStyle = nStyle ? 1 : 0; |
| if ( _bSetModified ) |
| SetModified(); |
| CallListeners(); |
| } |
| |
| void SvtMiscOptions_Impl::SetSymbolsSize( sal_Int16 nSet ) |
| { |
| m_nSymbolsSize = nSet; |
| SetModified(); |
| CallListeners(); |
| } |
| |
| sal_Int16 SvtMiscOptions_Impl::GetSymbolsStyle() const |
| { |
| return (sal_Int16)Application::GetSettings().GetStyleSettings().GetSymbolsStyle(); |
| } |
| |
| ::rtl::OUString SvtMiscOptions_Impl::GetSymbolsStyleName() const |
| { |
| return Application::GetSettings().GetStyleSettings().GetSymbolsStyleName(); |
| } |
| |
| sal_Int16 SvtMiscOptions_Impl::GetCurrentSymbolsStyle() const |
| { |
| return (sal_Int16)Application::GetSettings().GetStyleSettings().GetCurrentSymbolsStyle(); |
| } |
| |
| void SvtMiscOptions_Impl::ImplSetSymbolsStyle( bool bValue, sal_Int16 nSet, const ::rtl::OUString &rName ) |
| { |
| if ( ( bValue && ( nSet != GetSymbolsStyle() ) ) || |
| ( !bValue && ( rName != GetSymbolsStyleName() ) ) ) |
| { |
| AllSettings aAllSettings = Application::GetSettings(); |
| StyleSettings aStyleSettings = aAllSettings.GetStyleSettings(); |
| |
| if ( bValue ) |
| aStyleSettings.SetSymbolsStyle( nSet ); |
| else |
| aStyleSettings.SetSymbolsStyleName( rName ); |
| |
| aAllSettings.SetStyleSettings(aStyleSettings); |
| Application::MergeSystemSettings( aAllSettings ); |
| Application::SetSettings(aAllSettings); |
| |
| SetModified(); |
| CallListeners(); |
| } |
| } |
| |
| void SvtMiscOptions_Impl::SetPluginsEnabled( sal_Bool bEnable ) |
| { |
| m_bPluginsEnabled = bEnable; |
| SetModified(); |
| CallListeners(); |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| void SvtMiscOptions_Impl::Notify( const Sequence< OUString >& rPropertyNames ) |
| { |
| Load( rPropertyNames ); |
| CallListeners(); |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| void SvtMiscOptions_Impl::Commit() |
| { |
| // Get names of supported properties, create a list for values and copy current values to it. |
| Sequence< OUString > seqNames = GetPropertyNames (); |
| sal_Int32 nCount = seqNames.getLength(); |
| Sequence< Any > seqValues ( nCount ); |
| for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty ) |
| { |
| switch( nProperty ) |
| { |
| case PROPERTYHANDLE_PLUGINSENABLED : |
| { |
| if ( !m_bIsPluginsEnabledRO ) |
| seqValues[nProperty] <<= m_bPluginsEnabled; |
| break; |
| } |
| |
| case PROPERTYHANDLE_SYMBOLSET : |
| { |
| if ( !m_bIsSymbolsSizeRO ) |
| seqValues[nProperty] <<= m_nSymbolsSize; |
| break; |
| } |
| |
| case PROPERTYHANDLE_TOOLBOXSTYLE : |
| { |
| if ( !m_bIsToolboxStyleRO ) |
| seqValues[nProperty] <<= m_nToolboxStyle; |
| break; |
| } |
| |
| case PROPERTYHANDLE_USESYSTEMFILEDIALOG : |
| { |
| if ( !m_bIsUseSystemFileDialogRO ) |
| seqValues[nProperty] <<= m_bUseSystemFileDialog; |
| break; |
| } |
| |
| case PROPERTYHANDLE_SYMBOLSTYLE : |
| { |
| if ( !m_bIsSymbolsStyleRO ) |
| seqValues[nProperty] <<= GetSymbolsStyleName(); |
| break; |
| } |
| |
| case PROPERTYHANDLE_USESYSTEMPRINTDIALOG : |
| { |
| if ( !m_bIsUseSystemPrintDialogRO ) |
| seqValues[nProperty] <<= m_bUseSystemPrintDialog; |
| break; |
| } |
| } |
| } |
| // Set properties in configuration. |
| PutProperties( seqNames, seqValues ); |
| } |
| |
| //***************************************************************************************************************** |
| // private method |
| //***************************************************************************************************************** |
| Sequence< OUString > SvtMiscOptions_Impl::GetPropertyNames() |
| { |
| // Build static list of configuration key names. |
| static const OUString pProperties[] = |
| { |
| PROPERTYNAME_PLUGINSENABLED, |
| PROPERTYNAME_SYMBOLSET, |
| PROPERTYNAME_TOOLBOXSTYLE, |
| PROPERTYNAME_USESYSTEMFILEDIALOG, |
| PROPERTYNAME_SYMBOLSTYLE, |
| PROPERTYNAME_USESYSTEMPRINTDIALOG |
| }; |
| |
| // Initialize return sequence with these list ... |
| static const Sequence< OUString > seqPropertyNames( pProperties, PROPERTYCOUNT ); |
| // ... and return it. |
| return seqPropertyNames; |
| } |
| |
| //***************************************************************************************************************** |
| // initialize static member |
| // DON'T DO IT IN YOUR HEADER! |
| // see definition for further informations |
| //***************************************************************************************************************** |
| SvtMiscOptions_Impl* SvtMiscOptions::m_pDataContainer = NULL ; |
| sal_Int32 SvtMiscOptions::m_nRefCount = 0 ; |
| |
| //***************************************************************************************************************** |
| // constructor |
| //***************************************************************************************************************** |
| SvtMiscOptions::SvtMiscOptions() |
| { |
| // Global access, must be guarded (multithreading!). |
| MutexGuard aGuard( GetInitMutex() ); |
| // Increase ouer refcount ... |
| ++m_nRefCount; |
| // ... and initialize ouer data container only if it not already exist! |
| if( m_pDataContainer == NULL ) |
| { |
| RTL_LOGFILE_CONTEXT(aLog, "svtools ( ??? ) ::SvtMiscOptions_Impl::ctor()"); |
| m_pDataContainer = new SvtMiscOptions_Impl; |
| ItemHolder2::holdConfigItem(E_MISCOPTIONS); |
| } |
| } |
| |
| //***************************************************************************************************************** |
| // destructor |
| //***************************************************************************************************************** |
| SvtMiscOptions::~SvtMiscOptions() |
| { |
| // Global access, must be guarded (multithreading!) |
| MutexGuard aGuard( GetInitMutex() ); |
| // Decrease ouer refcount. |
| --m_nRefCount; |
| // If last instance was deleted ... |
| // we must destroy ouer static data container! |
| if( m_nRefCount <= 0 ) |
| { |
| delete m_pDataContainer; |
| m_pDataContainer = NULL; |
| } |
| } |
| |
| sal_Bool SvtMiscOptions::UseSystemFileDialog() const |
| { |
| return m_pDataContainer->UseSystemFileDialog(); |
| } |
| |
| void SvtMiscOptions::SetUseSystemFileDialog( sal_Bool bEnable ) |
| { |
| m_pDataContainer->SetUseSystemFileDialog( bEnable ); |
| } |
| |
| sal_Bool SvtMiscOptions::IsUseSystemFileDialogReadOnly() const |
| { |
| return m_pDataContainer->IsUseSystemFileDialogReadOnly(); |
| } |
| |
| sal_Bool SvtMiscOptions::IsPluginsEnabled() const |
| { |
| return m_pDataContainer->IsPluginsEnabled(); |
| } |
| |
| void SvtMiscOptions::SetPluginsEnabled( sal_Bool bEnable ) |
| { |
| m_pDataContainer->SetPluginsEnabled( bEnable ); |
| } |
| |
| sal_Bool SvtMiscOptions::IsPluginsEnabledReadOnly() const |
| { |
| return m_pDataContainer->IsPluginsEnabledReadOnly(); |
| } |
| |
| sal_Int16 SvtMiscOptions::GetSymbolsSize() const |
| { |
| return m_pDataContainer->GetSymbolsSize(); |
| } |
| |
| void SvtMiscOptions::SetSymbolsSize( sal_Int16 nSet ) |
| { |
| m_pDataContainer->SetSymbolsSize( nSet ); |
| } |
| |
| sal_Int16 SvtMiscOptions::GetCurrentSymbolsSize() const |
| { |
| sal_Int16 eOptSymbolsSize = m_pDataContainer->GetSymbolsSize(); |
| |
| if ( eOptSymbolsSize == SFX_SYMBOLS_SIZE_AUTO ) |
| { |
| // Use system settings, we have to retrieve the toolbar icon size from the |
| // Application class |
| sal_uLong nStyleIconSize = Application::GetSettings().GetStyleSettings().GetToolbarIconSize(); |
| if ( nStyleIconSize == STYLE_TOOLBAR_ICONSIZE_LARGE ) |
| eOptSymbolsSize = SFX_SYMBOLS_SIZE_LARGE; |
| else |
| eOptSymbolsSize = SFX_SYMBOLS_SIZE_SMALL; |
| } |
| |
| return eOptSymbolsSize; |
| } |
| |
| bool SvtMiscOptions::AreCurrentSymbolsLarge() const |
| { |
| return ( GetCurrentSymbolsSize() == SFX_SYMBOLS_SIZE_LARGE ); |
| } |
| |
| sal_Bool SvtMiscOptions::IsGetSymbolsSizeReadOnly() const |
| { |
| return m_pDataContainer->IsGetSymbolsSizeReadOnly(); |
| } |
| |
| sal_Int16 SvtMiscOptions::GetSymbolsStyle() const |
| { |
| return m_pDataContainer->GetSymbolsStyle(); |
| } |
| |
| sal_Int16 SvtMiscOptions::GetCurrentSymbolsStyle() const |
| { |
| return m_pDataContainer->GetCurrentSymbolsStyle(); |
| } |
| |
| OUString SvtMiscOptions::GetCurrentSymbolsStyleName() const |
| { |
| return Application::GetSettings().GetStyleSettings().GetCurrentSymbolsStyleName(); |
| } |
| |
| void SvtMiscOptions::SetSymbolsStyle( sal_Int16 nSet ) |
| { |
| m_pDataContainer->SetSymbolsStyle( nSet ); |
| } |
| |
| sal_Bool SvtMiscOptions::IsGetSymbolsStyleReadOnly() const |
| { |
| return m_pDataContainer->IsGetSymbolsStyleReadOnly(); |
| } |
| |
| sal_Int16 SvtMiscOptions::GetToolboxStyle() const |
| { |
| return m_pDataContainer->GetToolboxStyle(); |
| } |
| |
| void SvtMiscOptions::SetToolboxStyle( sal_Int16 nStyle ) |
| { |
| m_pDataContainer->SetToolboxStyle( nStyle, true ); |
| } |
| |
| sal_Bool SvtMiscOptions::IsGetToolboxStyleReadOnly() const |
| { |
| return m_pDataContainer->IsGetToolboxStyleReadOnly(); |
| } |
| |
| sal_Bool SvtMiscOptions::UseSystemPrintDialog() const |
| { |
| return m_pDataContainer->UseSystemPrintDialog(); |
| } |
| |
| void SvtMiscOptions::SetUseSystemPrintDialog( sal_Bool bEnable ) |
| { |
| m_pDataContainer->SetUseSystemPrintDialog( bEnable ); |
| } |
| |
| //***************************************************************************************************************** |
| // private method |
| //***************************************************************************************************************** |
| Mutex & SvtMiscOptions::GetInitMutex() |
| { |
| // Initialize static mutex only for one time! |
| static Mutex* pMutex = NULL; |
| // If these method first called (Mutex not already exist!) ... |
| if( pMutex == NULL ) |
| { |
| // ... we must create a new one. Protect follow code with the global mutex - |
| // It must be - we create a static variable! |
| MutexGuard aGuard( Mutex::getGlobalMutex() ); |
| // We must check our pointer again - because it can be that another instance of ouer class will be fastr then these! |
| if( pMutex == NULL ) |
| { |
| // Create the new mutex and set it for return on static variable. |
| static Mutex aMutex; |
| pMutex = &aMutex; |
| } |
| } |
| // Return new created or already existing mutex object. |
| return *pMutex; |
| } |
| |
| void SvtMiscOptions::AddListenerLink( const Link& rLink ) |
| { |
| m_pDataContainer->AddListenerLink( rLink ); |
| } |
| |
| void SvtMiscOptions::RemoveListenerLink( const Link& rLink ) |
| { |
| m_pDataContainer->RemoveListenerLink( rLink ); |
| } |
