| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_sd.hxx" |
| |
| #include "View.hxx" |
| #include <com/sun/star/embed/XEmbedObjectClipboardCreator.hpp> |
| #include <com/sun/star/embed/NoVisualAreaSizeException.hpp> |
| #include <com/sun/star/lang/XComponent.hpp> |
| #include <sot/filelist.hxx> |
| #include <unotools/pathoptions.hxx> |
| #include <editeng/editdata.hxx> |
| #include <svl/urlbmk.hxx> |
| #include <svx/xexch.hxx> |
| #include <svx/xflclit.hxx> |
| #include <svx/xlnclit.hxx> |
| #include <svx/svdpagv.hxx> |
| #include <editeng/eeitem.hxx> |
| #include <editeng/colritem.hxx> |
| #include <sfx2/docfile.hxx> |
| #include <svx/svditer.hxx> |
| #include <svx/svdogrp.hxx> |
| #include <svx/svdoole2.hxx> |
| #include <svx/svdograf.hxx> |
| #include <svx/svdetc.hxx> |
| #include <svx/svdundo.hxx> |
| #include <sfx2/app.hxx> |
| #include <svl/itempool.hxx> |
| #include <sot/clsids.hxx> |
| #include <svx/fmmodel.hxx> |
| #include <sot/formats.hxx> |
| #include <editeng/outliner.hxx> |
| #include <editeng/editeng.hxx> |
| #include <svx/obj3d.hxx> |
| #include <svx/e3dundo.hxx> |
| #include <svx/dbexch.hrc> |
| #include <svx/unomodel.hxx> |
| #include <unotools/streamwrap.hxx> |
| #include <vcl/metaact.hxx> |
| #include <svx/svxids.hrc> |
| #include <toolkit/helper/vclunohelper.hxx> |
| #include "DrawDocShell.hxx" |
| #include "fupoor.hxx" |
| #include "Window.hxx" |
| #include "sdxfer.hxx" |
| #include "sdpage.hxx" |
| #include "DrawViewShell.hxx" |
| #include "drawdoc.hxx" |
| #include "sdresid.hxx" |
| #include "strings.hrc" |
| #include "imapinfo.hxx" |
| #include "SlideSorterViewShell.hxx" |
| #include "strmname.h" |
| #include "unomodel.hxx" |
| #include "ViewClipboard.hxx" |
| #include <sfx2/ipclient.hxx> |
| #include <comphelper/storagehelper.hxx> |
| #include <comphelper/processfactory.hxx> |
| #include <tools/stream.hxx> |
| #include <vcl/cvtgrf.hxx> |
| #include <svx/sdrhittesthelper.hxx> |
| #include <svx/xbtmpit.hxx> |
| |
| // -------------- |
| // - Namespaces - |
| // -------------- |
| |
| using namespace ::com::sun::star; |
| using namespace ::com::sun::star::lang; |
| using namespace ::com::sun::star::uno; |
| using namespace ::com::sun::star::io; |
| using namespace ::com::sun::star::datatransfer; |
| using namespace ::com::sun::star::datatransfer::clipboard; |
| |
| namespace sd { |
| |
| #define CHECK_FORMAT_TRANS( _def_Type ) ( ( nFormat == (_def_Type) || !nFormat ) && aDataHelper.HasFormat( _def_Type ) ) |
| |
| /************************************************************************* |
| |* |
| |* Paste |
| |* |
| \************************************************************************/ |
| |
| // #83525# |
| struct ImpRememberOrigAndClone |
| { |
| SdrObject* pOrig; |
| SdrObject* pClone; |
| }; |
| |
| SdrObject* ImpGetClone(Container& aConnectorContainer, SdrObject* pConnObj) |
| { |
| for(sal_uInt32 a(0); a < aConnectorContainer.Count(); a++) |
| { |
| if(pConnObj == ((ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a))->pOrig) |
| return ((ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a))->pClone; |
| } |
| return 0L; |
| } |
| |
| // #90129# restrict movement to WorkArea |
| void ImpCheckInsertPos(Point& rPos, const Size& rSize, const Rectangle& rWorkArea) |
| { |
| if(!rWorkArea.IsEmpty()) |
| { |
| Rectangle aMarkRect(Point(rPos.X() - (rSize.Width() / 2), rPos.Y() - (rSize.Height() / 2)), rSize); |
| |
| if(!aMarkRect.IsInside(rWorkArea)) |
| { |
| if(aMarkRect.Left() < rWorkArea.Left()) |
| { |
| rPos.X() += rWorkArea.Left() - aMarkRect.Left(); |
| } |
| |
| if(aMarkRect.Right() > rWorkArea.Right()) |
| { |
| rPos.X() -= aMarkRect.Right() - rWorkArea.Right(); |
| } |
| |
| if(aMarkRect.Top() < rWorkArea.Top()) |
| { |
| rPos.Y() += rWorkArea.Top() - aMarkRect.Top(); |
| } |
| |
| if(aMarkRect.Bottom() > rWorkArea.Bottom()) |
| { |
| rPos.Y() -= aMarkRect.Bottom() - rWorkArea.Bottom(); |
| } |
| } |
| } |
| } |
| |
| bool View::InsertMetaFile( TransferableDataHelper& rDataHelper, const Point& rPos, ImageMap* pImageMap, bool bOptimize ) |
| { |
| GDIMetaFile aMtf; |
| |
| if( !rDataHelper.GetGDIMetaFile( FORMAT_GDIMETAFILE, aMtf ) ) |
| return false; |
| |
| /* |
| SvFileStream aSvOutputStream( String( RTL_CONSTASCII_USTRINGPARAM( "/tmp/test.png" ) ), STREAM_WRITE | STREAM_TRUNC ); |
| Graphic aMtfGraphic( aMtf ); |
| Size aPreviewSizePixel( OutputDevice::LogicToLogic( aMtf.GetPrefSize(), aMtf.GetPrefMapMode(), MAP_PIXEL ) ); |
| |
| if( aPreviewSizePixel.Width() && aPreviewSizePixel.Height() ) |
| { |
| const double fWH = static_cast< double >( aPreviewSizePixel.Width() ) / static_cast< double >( aPreviewSizePixel.Height() ); |
| |
| if( fWH <= 1.0 ) |
| aPreviewSizePixel.Width() = static_cast< long >( 128.0 * fWH ), aPreviewSizePixel.Height() = 128; |
| else |
| aPreviewSizePixel.Width() = 128, aPreviewSizePixel.Height() = static_cast< long >( 128.0 / fWH ); |
| |
| if( GraphicConverter::Export( aSvOutputStream, aMtfGraphic.GetBitmapEx( &aPreviewSizePixel ), CVT_PNG ) ) |
| { |
| // handle errror case here |
| } |
| else |
| { |
| // Success |
| } |
| } |
| */ |
| bool bVector = false; |
| Graphic aGraphic; |
| |
| // check if metafile only contains a pixel image, if so insert a bitmap instead |
| if( bOptimize ) |
| { |
| MetaAction* pAction = aMtf.FirstAction(); |
| while( pAction && !bVector ) |
| { |
| switch( pAction->GetType() ) |
| { |
| case META_POINT_ACTION: |
| case META_LINE_ACTION: |
| case META_RECT_ACTION: |
| case META_ROUNDRECT_ACTION: |
| case META_ELLIPSE_ACTION: |
| case META_ARC_ACTION: |
| case META_PIE_ACTION: |
| case META_CHORD_ACTION: |
| case META_POLYLINE_ACTION: |
| case META_POLYGON_ACTION: |
| case META_POLYPOLYGON_ACTION: |
| case META_TEXT_ACTION: |
| case META_TEXTARRAY_ACTION: |
| case META_STRETCHTEXT_ACTION: |
| case META_TEXTRECT_ACTION: |
| case META_GRADIENT_ACTION: |
| case META_HATCH_ACTION: |
| case META_WALLPAPER_ACTION: |
| case META_EPS_ACTION: |
| case META_TEXTLINE_ACTION: |
| case META_FLOATTRANSPARENT_ACTION: |
| case META_GRADIENTEX_ACTION: |
| case META_BMPSCALEPART_ACTION: |
| case META_BMPEXSCALEPART_ACTION: |
| bVector = true; |
| break; |
| case META_BMP_ACTION: |
| case META_BMPSCALE_ACTION: |
| case META_BMPEX_ACTION: |
| case META_BMPEXSCALE_ACTION: |
| if( aGraphic.GetType() != GRAPHIC_NONE ) |
| { |
| bVector = true; |
| } |
| else switch( pAction->GetType() ) |
| { |
| case META_BMP_ACTION: |
| { |
| MetaBmpAction* pBmpAction = dynamic_cast< MetaBmpAction* >( pAction ); |
| if( pBmpAction ) |
| aGraphic = Graphic( pBmpAction->GetBitmap() ); |
| } |
| break; |
| case META_BMPSCALE_ACTION: |
| { |
| MetaBmpScaleAction* pBmpScaleAction = dynamic_cast< MetaBmpScaleAction* >( pAction ); |
| if( pBmpScaleAction ) |
| aGraphic = Graphic( pBmpScaleAction->GetBitmap() ); |
| } |
| break; |
| case META_BMPEX_ACTION: |
| { |
| MetaBmpExAction* pBmpExAction = dynamic_cast< MetaBmpExAction* >( pAction ); |
| if( pBmpExAction ) |
| aGraphic = Graphic( pBmpExAction->GetBitmapEx() ); |
| } |
| break; |
| case META_BMPEXSCALE_ACTION: |
| { |
| MetaBmpExScaleAction* pBmpExScaleAction = dynamic_cast< MetaBmpExScaleAction* >( pAction ); |
| if( pBmpExScaleAction ) |
| aGraphic = Graphic( pBmpExScaleAction->GetBitmapEx() ); |
| } |
| break; |
| } |
| } |
| |
| pAction = aMtf.NextAction(); |
| } |
| } |
| |
| // it is not a vector metafile but it also has no graphic? |
| if( !bVector && (aGraphic.GetType() == GRAPHIC_NONE) ) |
| bVector = true; |
| |
| // #90129# restrict movement to WorkArea |
| Point aInsertPos( rPos ); |
| Size aImageSize; |
| aImageSize = bVector ? aMtf.GetPrefSize() : aGraphic.GetSizePixel(); |
| ImpCheckInsertPos(aInsertPos, aImageSize, GetWorkArea()); |
| |
| if( bVector ) |
| aGraphic = Graphic( aMtf ); |
| |
| aGraphic.SetPrefMapMode( aMtf.GetPrefMapMode() ); |
| aGraphic.SetPrefSize( aMtf.GetPrefSize() ); |
| InsertGraphic( aGraphic, mnAction, aInsertPos, NULL, pImageMap ); |
| |
| return true; |
| } |
| |
| sal_Bool View::InsertData( const TransferableDataHelper& rDataHelper, |
| const Point& rPos, sal_Int8& rDnDAction, sal_Bool bDrag, |
| sal_uLong nFormat, sal_uInt16 nPage, sal_uInt16 nLayer ) |
| { |
| maDropPos = rPos; |
| mnAction = rDnDAction; |
| mbIsDropAllowed = sal_False; |
| |
| TransferableDataHelper aDataHelper( rDataHelper ); |
| SdrObject* pPickObj = NULL; |
| SdPage* pPage = NULL; |
| ImageMap* pImageMap = NULL; |
| bool bReturn = false; |
| sal_Bool bLink = ( ( mnAction & DND_ACTION_LINK ) != 0 ); |
| sal_Bool bCopy = ( ( ( mnAction & DND_ACTION_COPY ) != 0 ) || bLink ); |
| sal_uLong nPasteOptions = SDRINSERT_SETDEFLAYER; |
| |
| if (mpViewSh != NULL) |
| { |
| OSL_ASSERT (mpViewSh->GetViewShell()!=NULL); |
| SfxInPlaceClient* pIpClient = mpViewSh->GetViewShell()->GetIPClient(); |
| if( mpViewSh->ISA(::sd::slidesorter::SlideSorterViewShell) |
| || (pIpClient!=NULL && pIpClient->IsObjectInPlaceActive())) |
| nPasteOptions |= SDRINSERT_DONTMARK; |
| } |
| |
| if( bDrag ) |
| { |
| SdrPageView* pPV = NULL; |
| PickObj( rPos, getHitTolLog(), pPickObj, pPV ); |
| } |
| |
| if( nPage != SDRPAGE_NOTFOUND ) |
| pPage = (SdPage*) mpDoc->GetPage( nPage ); |
| |
| SdTransferable* pOwnData = NULL; |
| SdTransferable* pImplementation = SdTransferable::getImplementation( aDataHelper.GetTransferable() ); |
| |
| if(pImplementation && (rDnDAction & DND_ACTION_LINK)) |
| { |
| // suppress own data when it's intention is to use it as fill information |
| pImplementation = 0; |
| } |
| |
| // try to get own transfer data |
| if( pImplementation ) |
| { |
| if( SD_MOD()->pTransferClip == (SdTransferable*) pImplementation ) |
| pOwnData = SD_MOD()->pTransferClip; |
| else if( SD_MOD()->pTransferDrag == (SdTransferable*) pImplementation ) |
| pOwnData = SD_MOD()->pTransferDrag; |
| else if( SD_MOD()->pTransferSelection == (SdTransferable*) pImplementation ) |
| pOwnData = SD_MOD()->pTransferSelection; |
| } |
| |
| // ImageMap? |
| if( !pOwnData && aDataHelper.HasFormat( SOT_FORMATSTR_ID_SVIM ) ) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_SVIM, xStm ) ) |
| { |
| pImageMap = new ImageMap; |
| // mba: clipboard always must contain absolute URLs (could be from alien source) |
| pImageMap->Read( *xStm, String() ); |
| } |
| } |
| |
| bool bTable = false; |
| // check special cases for pasting table formats as RTL |
| if( !bLink && (!nFormat || (nFormat == SOT_FORMAT_RTF)) ) |
| { |
| // if the objekt supports rtf and there is a table involved, default is to create a table |
| if( aDataHelper.HasFormat( SOT_FORMAT_RTF ) && ! aDataHelper.HasFormat( SOT_FORMATSTR_ID_DRAWING ) ) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( FORMAT_RTF, xStm ) ) |
| { |
| xStm->Seek( 0 ); |
| |
| ByteString aLine; |
| while( xStm->ReadLine(aLine) ) |
| { |
| xub_StrLen x = aLine.Search( "\\trowd" ); |
| if( x != STRING_NOTFOUND ) |
| { |
| bTable = true; |
| nFormat = FORMAT_RTF; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| // Changed the whole decision tree to be dependent of bReturn as a flag that |
| // the work was done; this allows to check multiple formats and not just fail |
| // when a CHECK_FORMAT_TRANS(*format*) detected format does not work. This is |
| // e.g. necessary for FORMAT_BITMAP |
| if( pOwnData && !nFormat ) |
| { |
| const View* pSourceView = pOwnData->GetView(); |
| |
| if( pOwnData->GetDocShell() && pOwnData->IsPageTransferable() && ISA( View ) ) |
| { |
| mpClipboard->HandlePageDrop (*pOwnData); |
| } |
| else if( pSourceView ) |
| { |
| if( pSourceView == this ) |
| { |
| // same view |
| if( nLayer != SDRLAYER_NOTFOUND ) |
| { |
| // drop on layer tab bar |
| SdrLayerAdmin& rLayerAdmin = mpDoc->GetLayerAdmin(); |
| SdrLayer* pLayer = rLayerAdmin.GetLayerPerID( nLayer ); |
| SdrPageView* pPV = GetSdrPageView(); |
| String aLayer( pLayer->GetName() ); |
| |
| if( !pPV->IsLayerLocked( aLayer ) ) |
| { |
| pOwnData->SetInternalMove( sal_True ); |
| SortMarkedObjects(); |
| |
| for( sal_uLong nM = 0; nM < GetMarkedObjectCount(); nM++ ) |
| { |
| SdrMark* pM = GetSdrMarkByIndex( nM ); |
| SdrObject* pO = pM->GetMarkedSdrObj(); |
| |
| if( pO ) |
| { |
| // #i11702# |
| if( IsUndoEnabled() ) |
| { |
| BegUndo(String(SdResId(STR_MODIFYLAYER))); |
| AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectLayerChange(*pO, pO->GetLayer(), (SdrLayerID)nLayer)); |
| EndUndo(); |
| } |
| |
| pO->SetLayer( (SdrLayerID) nLayer ); |
| } |
| } |
| |
| bReturn = true; |
| } |
| } |
| else |
| { |
| SdrPageView* pPV = GetSdrPageView(); |
| sal_Bool bDropOnTabBar = sal_True; |
| |
| if( !pPage && pPV->GetPage()->GetPageNum() != mnDragSrcPgNum ) |
| { |
| pPage = (SdPage*) pPV->GetPage(); |
| bDropOnTabBar = sal_False; |
| } |
| |
| if( pPage ) |
| { |
| // drop on other page |
| String aActiveLayer( GetActiveLayer() ); |
| |
| if( !pPV->IsLayerLocked( aActiveLayer ) ) |
| { |
| if( !IsPresObjSelected() ) |
| { |
| SdrMarkList* pMarkList; |
| |
| if( (mnDragSrcPgNum != SDRPAGE_NOTFOUND) && (mnDragSrcPgNum != pPV->GetPage()->GetPageNum()) ) |
| { |
| pMarkList = mpDragSrcMarkList; |
| } |
| else |
| { |
| // actual mark list is used |
| pMarkList = new SdrMarkList( GetMarkedObjectList()); |
| } |
| |
| pMarkList->ForceSort(); |
| |
| // #83525# stuff to remember originals and clones |
| Container aConnectorContainer(0); |
| sal_uInt32 a, nConnectorCount(0L); |
| Point aCurPos; |
| |
| // calculate real position of current |
| // source objects, if necessary (#103207) |
| if( pOwnData == SD_MOD()->pTransferSelection ) |
| { |
| Rectangle aCurBoundRect; |
| |
| if( pMarkList->TakeBoundRect( pPV, aCurBoundRect ) ) |
| aCurPos = aCurBoundRect.TopLeft(); |
| else |
| aCurPos = pOwnData->GetStartPos(); |
| } |
| else |
| aCurPos = pOwnData->GetStartPos(); |
| |
| const Size aVector( maDropPos.X() - aCurPos.X(), maDropPos.Y() - aCurPos.Y() ); |
| |
| for(a = 0; a < pMarkList->GetMarkCount(); a++) |
| { |
| SdrMark* pM = pMarkList->GetMark(a); |
| SdrObject* pObj = pM->GetMarkedSdrObj()->Clone(); |
| |
| if(pObj) |
| { |
| if(!bDropOnTabBar) |
| { |
| // #83525# do a NbcMove(...) instead of setting SnapRects here |
| pObj->NbcMove(aVector); |
| } |
| |
| pPage->InsertObject(pObj); |
| |
| if( IsUndoEnabled() ) |
| { |
| BegUndo(String(SdResId(STR_UNDO_DRAGDROP))); |
| AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pObj)); |
| EndUndo(); |
| } |
| |
| // #83525# |
| ImpRememberOrigAndClone* pRem = new ImpRememberOrigAndClone; |
| pRem->pOrig = pM->GetMarkedSdrObj(); |
| pRem->pClone = pObj; |
| aConnectorContainer.Insert(pRem, CONTAINER_APPEND); |
| |
| if(pObj->ISA(SdrEdgeObj)) |
| nConnectorCount++; |
| } |
| } |
| |
| // #83525# try to re-establish connections at clones |
| if(nConnectorCount) |
| { |
| for(a = 0; a < aConnectorContainer.Count(); a++) |
| { |
| ImpRememberOrigAndClone* pRem = (ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a); |
| |
| if(pRem->pClone->ISA(SdrEdgeObj)) |
| { |
| SdrEdgeObj* pOrigEdge = (SdrEdgeObj*)pRem->pOrig; |
| SdrEdgeObj* pCloneEdge = (SdrEdgeObj*)pRem->pClone; |
| |
| // test first connection |
| SdrObjConnection& rConn0 = pOrigEdge->GetConnection(sal_False); |
| SdrObject* pConnObj = rConn0.GetObject(); |
| if(pConnObj) |
| { |
| SdrObject* pConnClone = ImpGetClone(aConnectorContainer, pConnObj); |
| if(pConnClone) |
| { |
| // if dest obj was cloned, too, re-establish connection |
| pCloneEdge->ConnectToNode(sal_False, pConnClone); |
| pCloneEdge->GetConnection(sal_False).SetConnectorId(rConn0.GetConnectorId()); |
| } |
| else |
| { |
| // set position of connection point of original connected object |
| const SdrGluePointList* pGlueList = pConnObj->GetGluePointList(); |
| if(pGlueList) |
| { |
| sal_uInt16 nInd = pGlueList->FindGluePoint(rConn0.GetConnectorId()); |
| |
| if(SDRGLUEPOINT_NOTFOUND != nInd) |
| { |
| const SdrGluePoint& rGluePoint = (*pGlueList)[nInd]; |
| Point aPosition = rGluePoint.GetAbsolutePos(*pConnObj); |
| aPosition.X() += aVector.A(); |
| aPosition.Y() += aVector.B(); |
| pCloneEdge->SetTailPoint(sal_False, aPosition); |
| } |
| } |
| } |
| } |
| |
| // test second connection |
| SdrObjConnection& rConn1 = pOrigEdge->GetConnection(sal_True); |
| pConnObj = rConn1.GetObject(); |
| if(pConnObj) |
| { |
| SdrObject* pConnClone = ImpGetClone(aConnectorContainer, pConnObj); |
| if(pConnClone) |
| { |
| // if dest obj was cloned, too, re-establish connection |
| pCloneEdge->ConnectToNode(sal_True, pConnClone); |
| pCloneEdge->GetConnection(sal_True).SetConnectorId(rConn1.GetConnectorId()); |
| } |
| else |
| { |
| // set position of connection point of original connected object |
| const SdrGluePointList* pGlueList = pConnObj->GetGluePointList(); |
| if(pGlueList) |
| { |
| sal_uInt16 nInd = pGlueList->FindGluePoint(rConn1.GetConnectorId()); |
| |
| if(SDRGLUEPOINT_NOTFOUND != nInd) |
| { |
| const SdrGluePoint& rGluePoint = (*pGlueList)[nInd]; |
| Point aPosition = rGluePoint.GetAbsolutePos(*pConnObj); |
| aPosition.X() += aVector.A(); |
| aPosition.Y() += aVector.B(); |
| pCloneEdge->SetTailPoint(sal_True, aPosition); |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| // #83525# cleanup remember classes |
| for(a = 0; a < aConnectorContainer.Count(); a++) |
| delete (ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a); |
| |
| if( pMarkList != mpDragSrcMarkList ) |
| delete pMarkList; |
| |
| bReturn = true; |
| } |
| else |
| { |
| maDropErrorTimer.Start(); |
| bReturn = false; |
| } |
| } |
| } |
| else |
| { |
| pOwnData->SetInternalMove( sal_True ); |
| MoveAllMarked( Size( maDropPos.X() - pOwnData->GetStartPos().X(), |
| maDropPos.Y() - pOwnData->GetStartPos().Y() ), bCopy ); |
| bReturn = true; |
| } |
| } |
| } |
| else |
| { |
| // different views |
| if( !pSourceView->IsPresObjSelected() ) |
| { |
| // model is owned by from AllocModel() created DocShell |
| SdDrawDocument* pSourceDoc = (SdDrawDocument*) pSourceView->GetModel(); |
| pSourceDoc->CreatingDataObj( pOwnData ); |
| SdDrawDocument* pModel = (SdDrawDocument*) pSourceView->GetAllMarkedModel(); |
| bReturn = Paste( *pModel, maDropPos, pPage, nPasteOptions ); |
| |
| if( !pPage ) |
| pPage = (SdPage*) GetSdrPageView()->GetPage(); |
| |
| String aLayout( pPage->GetLayoutName() ); |
| aLayout.Erase( aLayout.SearchAscii( SD_LT_SEPARATOR ) ); |
| pPage->SetPresentationLayout( aLayout, sal_False, sal_False ); |
| pSourceDoc->CreatingDataObj( NULL ); |
| } |
| else |
| { |
| maDropErrorTimer.Start(); |
| bReturn = false; |
| } |
| } |
| } |
| else |
| { |
| SdDrawDocument* pWorkModel = (SdDrawDocument*) pOwnData->GetWorkDocument(); |
| SdPage* pWorkPage = (SdPage*) pWorkModel->GetSdPage( 0, PK_STANDARD ); |
| |
| pWorkPage->SetRectsDirty(); |
| |
| // #120393# Clipboard data uses full object geometry range |
| const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() ); |
| |
| maDropPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 ); |
| maDropPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 ); |
| |
| // delete pages, that are not of any interest for us |
| for( long i = ( pWorkModel->GetPageCount() - 1 ); i >= 0; i-- ) |
| { |
| SdPage* pP = static_cast< SdPage* >( pWorkModel->GetPage( (sal_uInt16) i ) ); |
| |
| if( pP->GetPageKind() != PK_STANDARD ) |
| pWorkModel->DeletePage( (sal_uInt16) i ); |
| } |
| |
| bReturn = Paste( *pWorkModel, maDropPos, pPage, nPasteOptions ); |
| |
| if( !pPage ) |
| pPage = (SdPage*) GetSdrPageView()->GetPage(); |
| |
| String aLayout(pPage->GetLayoutName()); |
| aLayout.Erase(aLayout.SearchAscii(SD_LT_SEPARATOR)); |
| pPage->SetPresentationLayout( aLayout, sal_False, sal_False ); |
| } |
| } |
| |
| if(!bReturn && CHECK_FORMAT_TRANS( SOT_FORMATSTR_ID_DRAWING )) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_DRAWING, xStm ) ) |
| { |
| sal_Bool bChanged = sal_False; |
| |
| DrawDocShellRef xShell = new DrawDocShell(SFX_CREATE_MODE_INTERNAL); |
| xShell->DoInitNew(0); |
| |
| SdDrawDocument* pModel = xShell->GetDoc(); |
| pModel->InsertPage(pModel->AllocPage(false)); |
| |
| Reference< XComponent > xComponent( xShell->GetModel(), UNO_QUERY ); |
| xStm->Seek( 0 ); |
| |
| com::sun::star::uno::Reference< com::sun::star::io::XInputStream > xInputStream( new utl::OInputStreamWrapper( *xStm ) ); |
| bReturn = SvxDrawingLayerImport( pModel, xInputStream, xComponent, "com.sun.star.comp.Impress.XMLOasisImporter" ); |
| |
| if( pModel->GetPageCount() == 0 ) |
| { |
| DBG_ERROR("empty or invalid drawing xml document on clipboard!" ); |
| } |
| else |
| { |
| if( bReturn ) |
| { |
| if( pModel->GetSdPage( 0, PK_STANDARD )->GetObjCount() == 1 ) |
| { |
| // only one object |
| SdrObject* pObj = pModel->GetSdPage( 0, PK_STANDARD )->GetObj( 0 ); |
| SdrObject* pPickObj2 = NULL; |
| SdrPageView* pPV = NULL; |
| PickObj( rPos, getHitTolLog(), pPickObj2, pPV ); |
| |
| if( ( mnAction & DND_ACTION_MOVE ) && pPickObj2 && pObj ) |
| { |
| // replace object |
| SdrObject* pNewObj = pObj->Clone(); |
| Rectangle aPickObjRect( pPickObj2->GetCurrentBoundRect() ); |
| Size aPickObjSize( aPickObjRect.GetSize() ); |
| Point aVec( aPickObjRect.TopLeft() ); |
| Rectangle aObjRect( pNewObj->GetCurrentBoundRect() ); |
| Size aObjSize( aObjRect.GetSize() ); |
| |
| Fraction aScaleWidth( aPickObjSize.Width(), aObjSize.Width() ); |
| Fraction aScaleHeight( aPickObjSize.Height(), aObjSize.Height() ); |
| pNewObj->NbcResize( aObjRect.TopLeft(), aScaleWidth, aScaleHeight ); |
| |
| aVec -= aObjRect.TopLeft(); |
| pNewObj->NbcMove( Size( aVec.X(), aVec.Y() ) ); |
| |
| const bool bUndo = IsUndoEnabled(); |
| |
| if( bUndo ) |
| BegUndo( String( SdResId(STR_UNDO_DRAGDROP ) ) ); |
| pNewObj->NbcSetLayer( pPickObj->GetLayer() ); |
| SdrPage* pWorkPage = GetSdrPageView()->GetPage(); |
| pWorkPage->InsertObject( pNewObj ); |
| if( bUndo ) |
| { |
| AddUndo( mpDoc->GetSdrUndoFactory().CreateUndoNewObject( *pNewObj ) ); |
| AddUndo( mpDoc->GetSdrUndoFactory().CreateUndoDeleteObject( *pPickObj2 ) ); |
| } |
| pWorkPage->RemoveObject( pPickObj2->GetOrdNum() ); |
| |
| if( bUndo ) |
| { |
| EndUndo(); |
| } |
| else |
| { |
| SdrObject::Free(pPickObj2 ); |
| } |
| bChanged = sal_True; |
| mnAction = DND_ACTION_COPY; |
| } |
| else if( ( mnAction & DND_ACTION_LINK ) && pPickObj && pObj && !pPickObj->ISA( SdrGrafObj ) && !pPickObj->ISA( SdrOle2Obj ) ) |
| { |
| SfxItemSet aSet( mpDoc->GetPool() ); |
| |
| // set new attributes to object |
| const bool bUndo = IsUndoEnabled(); |
| if( bUndo ) |
| { |
| BegUndo( String( SdResId( STR_UNDO_DRAGDROP ) ) ); |
| AddUndo( mpDoc->GetSdrUndoFactory().CreateUndoAttrObject( *pPickObj ) ); |
| } |
| |
| aSet.Put( pObj->GetMergedItemSet() ); |
| |
| // Eckenradius soll nicht uebernommen werden. |
| // In der Gallery stehen Farbverlauefe (Rechtecke) |
| // welche den Eckenradius == 0 haben. Dieser soll |
| // nicht auf das Objekt uebertragen werden. |
| aSet.ClearItem( SDRATTR_ECKENRADIUS ); |
| |
| const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj); |
| |
| if(pSdrGrafObj) |
| { |
| // If we have a graphic as source object, use it's graphic |
| // content as fill style |
| aSet.Put(XFillStyleItem(XFILL_BITMAP)); |
| aSet.Put(XFillBitmapItem(&mpDoc->GetPool(), pSdrGrafObj->GetGraphic())); |
| } |
| |
| pPickObj->SetMergedItemSetAndBroadcast( aSet ); |
| |
| if( pPickObj->ISA( E3dObject ) && pObj->ISA( E3dObject ) ) |
| { |
| // Zusaetzlich 3D Attribute handeln |
| SfxItemSet aNewSet( mpDoc->GetPool(), SID_ATTR_3D_START, SID_ATTR_3D_END, 0 ); |
| SfxItemSet aOldSet( mpDoc->GetPool(), SID_ATTR_3D_START, SID_ATTR_3D_END, 0 ); |
| |
| aOldSet.Put(pPickObj->GetMergedItemSet()); |
| aNewSet.Put( pObj->GetMergedItemSet() ); |
| |
| if( bUndo ) |
| AddUndo( new E3dAttributesUndoAction( *mpDoc, this, (E3dObject*) pPickObj, aNewSet, aOldSet, sal_False ) ); |
| pPickObj->SetMergedItemSetAndBroadcast( aNewSet ); |
| } |
| |
| if( bUndo ) |
| EndUndo(); |
| bChanged = sal_True; |
| } |
| } |
| } |
| |
| if( !bChanged ) |
| { |
| SdrPage* pWorkPage = pModel->GetSdPage( 0, PK_STANDARD ); |
| |
| pWorkPage->SetRectsDirty(); |
| |
| if( pOwnData ) |
| { |
| // #120393# Clipboard data uses full object geometry range |
| const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() ); |
| |
| maDropPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 ); |
| maDropPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 ); |
| } |
| |
| bReturn = Paste( *pModel, maDropPos, pPage, nPasteOptions ); |
| } |
| |
| xShell->DoClose(); |
| } |
| } |
| } |
| |
| if(!bReturn && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_SBA_FIELDDATAEXCHANGE)) |
| { |
| ::rtl::OUString aOUString; |
| |
| if( aDataHelper.GetString( SOT_FORMATSTR_ID_SBA_FIELDDATAEXCHANGE, aOUString ) ) |
| { |
| SdrObject* pObj = CreateFieldControl( aOUString ); |
| |
| if( pObj ) |
| { |
| Rectangle aRect( pObj->GetLogicRect() ); |
| Size aSize( aRect.GetSize() ); |
| |
| maDropPos.X() -= ( aSize.Width() >> 1 ); |
| maDropPos.Y() -= ( aSize.Height() >> 1 ); |
| |
| aRect.SetPos( maDropPos ); |
| pObj->SetLogicRect( aRect ); |
| InsertObjectAtView( pObj, *GetSdrPageView(), SDRINSERT_SETDEFLAYER ); |
| bReturn = true; |
| } |
| } |
| } |
| |
| if(!bReturn && |
| !bLink && |
| (CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBED_SOURCE) || CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBEDDED_OBJ)) && |
| aDataHelper.HasFormat(SOT_FORMATSTR_ID_OBJECTDESCRIPTOR)) |
| { |
| //TODO/LATER: is it possible that this format is binary?! (from old versions of SO) |
| uno::Reference < io::XInputStream > xStm; |
| TransferableObjectDescriptor aObjDesc; |
| |
| if( aDataHelper.GetTransferableObjectDescriptor( SOT_FORMATSTR_ID_OBJECTDESCRIPTOR, aObjDesc ) && |
| ( aDataHelper.GetInputStream( nFormat ? nFormat : SOT_FORMATSTR_ID_EMBED_SOURCE, xStm ) || |
| aDataHelper.GetInputStream( SOT_FORMATSTR_ID_EMBEDDED_OBJ, xStm ) ) ) |
| { |
| if( mpDoc->GetDocSh() && ( mpDoc->GetDocSh()->GetClassName() == aObjDesc.maClassName ) ) |
| { |
| uno::Reference < embed::XStorage > xStore( ::comphelper::OStorageHelper::GetStorageFromInputStream( xStm ) ); |
| ::sd::DrawDocShellRef xDocShRef( new ::sd::DrawDocShell( SFX_CREATE_MODE_EMBEDDED, sal_True, mpDoc->GetDocumentType() ) ); |
| |
| // mba: BaseURL doesn't make sense for clipboard functionality |
| SfxMedium *pMedium = new SfxMedium( xStore, String() ); |
| if( xDocShRef->DoLoad( pMedium ) ) |
| { |
| SdDrawDocument* pModel = (SdDrawDocument*) xDocShRef->GetDoc(); |
| SdPage* pWorkPage = (SdPage*) pModel->GetSdPage( 0, PK_STANDARD ); |
| |
| pWorkPage->SetRectsDirty(); |
| |
| if( pOwnData ) |
| { |
| // #120393# Clipboard data uses full object geometry range |
| const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() ); |
| |
| maDropPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 ); |
| maDropPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 ); |
| } |
| |
| // delete pages, that are not of any interest for us |
| for( long i = ( pModel->GetPageCount() - 1 ); i >= 0; i-- ) |
| { |
| SdPage* pP = static_cast< SdPage* >( pModel->GetPage( (sal_uInt16) i ) ); |
| |
| if( pP->GetPageKind() != PK_STANDARD ) |
| pModel->DeletePage( (sal_uInt16) i ); |
| } |
| |
| bReturn = Paste( *pModel, maDropPos, pPage, nPasteOptions ); |
| |
| if( !pPage ) |
| pPage = (SdPage*) GetSdrPageView()->GetPage(); |
| |
| String aLayout(pPage->GetLayoutName()); |
| aLayout.Erase(aLayout.SearchAscii(SD_LT_SEPARATOR)); |
| pPage->SetPresentationLayout( aLayout, sal_False, sal_False ); |
| } |
| |
| xDocShRef->DoClose(); |
| xDocShRef.Clear(); |
| |
| } |
| else |
| { |
| ::rtl::OUString aName; |
| uno::Reference < embed::XEmbeddedObject > xObj = mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xStm, aName ); |
| if ( xObj.is() ) |
| { |
| svt::EmbeddedObjectRef aObjRef( xObj, aObjDesc.mnViewAspect ); |
| |
| // try to get the replacement image from the clipboard |
| Graphic aGraphic; |
| sal_uLong nGrFormat = 0; |
| |
| // (wg. Selection Manager bei Trustet Solaris) |
| #ifndef SOLARIS |
| /* |
| if( aDataHelper.GetGraphic( SOT_FORMATSTR_ID_SVXB, aGraphic ) ) |
| nGrFormat = SOT_FORMATSTR_ID_SVXB; |
| else if( aDataHelper.GetGraphic( FORMAT_GDIMETAFILE, aGraphic ) ) |
| nGrFormat = SOT_FORMAT_GDIMETAFILE; |
| else if( aDataHelper.GetGraphic( FORMAT_BITMAP, aGraphic ) ) |
| nGrFormat = SOT_FORMAT_BITMAP; |
| */ |
| #endif |
| |
| // insert replacement image ( if there is one ) into the object helper |
| if ( nGrFormat ) |
| { |
| datatransfer::DataFlavor aDataFlavor; |
| SotExchange::GetFormatDataFlavor( nGrFormat, aDataFlavor ); |
| aObjRef.SetGraphic( aGraphic, aDataFlavor.MimeType ); |
| } |
| |
| Size aSize; |
| if ( aObjDesc.mnViewAspect == embed::Aspects::MSOLE_ICON ) |
| { |
| if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() ) |
| aSize = aObjDesc.maSize; |
| else |
| { |
| MapMode aMapMode( MAP_100TH_MM ); |
| aSize = aObjRef.GetSize( &aMapMode ); |
| } |
| } |
| else |
| { |
| awt::Size aSz; |
| MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( aObjDesc.mnViewAspect ) ); |
| if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() ) |
| { |
| Size aTmp( OutputDevice::LogicToLogic( aObjDesc.maSize, MAP_100TH_MM, aMapUnit ) ); |
| aSz.Width = aTmp.Width(); |
| aSz.Height = aTmp.Height(); |
| xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz ); |
| } |
| |
| try |
| { |
| aSz = xObj->getVisualAreaSize( aObjDesc.mnViewAspect ); |
| } |
| catch( embed::NoVisualAreaSizeException& ) |
| { |
| // if the size still was not set the default size will be set later |
| } |
| |
| aSize = Size( aSz.Width, aSz.Height ); |
| |
| if( !aSize.Width() || !aSize.Height() ) |
| { |
| aSize.Width() = 14100; |
| aSize.Height() = 10000; |
| aSize = OutputDevice::LogicToLogic( Size(14100, 10000), MAP_100TH_MM, aMapUnit ); |
| aSz.Width = aSize.Width(); |
| aSz.Height = aSize.Height(); |
| xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz ); |
| } |
| |
| aSize = OutputDevice::LogicToLogic( aSize, aMapUnit, MAP_100TH_MM ); |
| } |
| |
| Size aMaxSize( mpDoc->GetMaxObjSize() ); |
| |
| maDropPos.X() -= Min( aSize.Width(), aMaxSize.Width() ) >> 1; |
| maDropPos.Y() -= Min( aSize.Height(), aMaxSize.Height() ) >> 1; |
| |
| Rectangle aRect( maDropPos, aSize ); |
| SdrOle2Obj* pObj = new SdrOle2Obj( aObjRef, aName, aRect ); |
| SdrPageView* pPV = GetSdrPageView(); |
| sal_uLong nOptions = SDRINSERT_SETDEFLAYER; |
| |
| if (mpViewSh!=NULL) |
| { |
| OSL_ASSERT (mpViewSh->GetViewShell()!=NULL); |
| SfxInPlaceClient* pIpClient |
| = mpViewSh->GetViewShell()->GetIPClient(); |
| if (pIpClient!=NULL && pIpClient->IsObjectInPlaceActive()) |
| nOptions |= SDRINSERT_DONTMARK; |
| } |
| |
| InsertObjectAtView( pObj, *pPV, nOptions ); |
| |
| if( pImageMap ) |
| pObj->InsertUserData( new SdIMapInfo( *pImageMap ) ); |
| |
| if ( pObj && pObj->IsChart() ) |
| { |
| bool bDisableDataTableDialog = false; |
| svt::EmbeddedObjectRef::TryRunningState( xObj ); |
| uno::Reference< beans::XPropertySet > xProps( xObj->getComponent(), uno::UNO_QUERY ); |
| if ( xProps.is() && |
| ( xProps->getPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableDataTableDialog" ) ) ) >>= bDisableDataTableDialog ) && |
| bDisableDataTableDialog ) |
| { |
| xProps->setPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableDataTableDialog" ) ), |
| uno::makeAny( sal_False ) ); |
| xProps->setPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableComplexChartTypes" ) ), |
| uno::makeAny( sal_False ) ); |
| uno::Reference< util::XModifiable > xModifiable( xProps, uno::UNO_QUERY ); |
| if ( xModifiable.is() ) |
| { |
| xModifiable->setModified( sal_True ); |
| } |
| } |
| } |
| |
| bReturn = true; |
| } |
| } |
| } |
| } |
| |
| if(!bReturn && |
| !bLink && |
| (CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBEDDED_OBJ_OLE) || CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBED_SOURCE_OLE)) && |
| aDataHelper.HasFormat(SOT_FORMATSTR_ID_OBJECTDESCRIPTOR_OLE)) |
| { |
| // online insert ole if format is forced or no gdi metafile is available |
| if( (nFormat != 0) || !aDataHelper.HasFormat( FORMAT_GDIMETAFILE ) ) |
| { |
| uno::Reference < io::XInputStream > xStm; |
| TransferableObjectDescriptor aObjDesc; |
| |
| if ( aDataHelper.GetTransferableObjectDescriptor( SOT_FORMATSTR_ID_OBJECTDESCRIPTOR_OLE, aObjDesc ) ) |
| { |
| uno::Reference < embed::XEmbeddedObject > xObj; |
| ::rtl::OUString aName; |
| |
| if ( aDataHelper.GetInputStream( nFormat ? nFormat : SOT_FORMATSTR_ID_EMBED_SOURCE_OLE, xStm ) || |
| aDataHelper.GetInputStream( SOT_FORMATSTR_ID_EMBEDDED_OBJ_OLE, xStm ) ) |
| { |
| xObj = mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xStm, aName ); |
| } |
| else |
| { |
| try |
| { |
| uno::Reference< embed::XStorage > xTmpStor = ::comphelper::OStorageHelper::GetTemporaryStorage(); |
| uno::Reference < embed::XEmbedObjectClipboardCreator > xClipboardCreator( |
| ::comphelper::getProcessServiceFactory()->createInstance( |
| ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM("com.sun.star.embed.MSOLEObjectSystemCreator")) ), |
| uno::UNO_QUERY_THROW ); |
| |
| embed::InsertedObjectInfo aInfo = xClipboardCreator->createInstanceInitFromClipboard( |
| xTmpStor, |
| ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM ( "DummyName" ) ), |
| uno::Sequence< beans::PropertyValue >() ); |
| |
| // TODO/LATER: in future InsertedObjectInfo will be used to get container related information |
| // for example whether the object should be an iconified one |
| xObj = aInfo.Object; |
| if ( xObj.is() ) |
| mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xObj, aName ); |
| } |
| catch( uno::Exception& ) |
| {} |
| } |
| |
| if ( xObj.is() ) |
| { |
| svt::EmbeddedObjectRef aObjRef( xObj, aObjDesc.mnViewAspect ); |
| |
| // try to get the replacement image from the clipboard |
| Graphic aGraphic; |
| sal_uLong nGrFormat = 0; |
| |
| // (wg. Selection Manager bei Trustet Solaris) |
| #ifndef SOLARIS |
| if( aDataHelper.GetGraphic( SOT_FORMATSTR_ID_SVXB, aGraphic ) ) |
| nGrFormat = SOT_FORMATSTR_ID_SVXB; |
| else if( aDataHelper.GetGraphic( FORMAT_GDIMETAFILE, aGraphic ) ) |
| nGrFormat = SOT_FORMAT_GDIMETAFILE; |
| else if( aDataHelper.GetGraphic( FORMAT_BITMAP, aGraphic ) ) |
| nGrFormat = SOT_FORMAT_BITMAP; |
| #endif |
| |
| // insert replacement image ( if there is one ) into the object helper |
| if ( nGrFormat ) |
| { |
| datatransfer::DataFlavor aDataFlavor; |
| SotExchange::GetFormatDataFlavor( nGrFormat, aDataFlavor ); |
| aObjRef.SetGraphic( aGraphic, aDataFlavor.MimeType ); |
| } |
| |
| Size aSize; |
| if ( aObjDesc.mnViewAspect == embed::Aspects::MSOLE_ICON ) |
| { |
| if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() ) |
| aSize = aObjDesc.maSize; |
| else |
| { |
| MapMode aMapMode( MAP_100TH_MM ); |
| aSize = aObjRef.GetSize( &aMapMode ); |
| } |
| } |
| else |
| { |
| MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( aObjDesc.mnViewAspect ) ); |
| |
| awt::Size aSz; |
| try{ |
| aSz = xObj->getVisualAreaSize( aObjDesc.mnViewAspect ); |
| } |
| catch( embed::NoVisualAreaSizeException& ) |
| { |
| // the default size will be set later |
| } |
| |
| if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() ) |
| { |
| Size aTmp( OutputDevice::LogicToLogic( aObjDesc.maSize, MAP_100TH_MM, aMapUnit ) ); |
| if ( aSz.Width != aTmp.Width() || aSz.Height != aTmp.Height() ) |
| { |
| aSz.Width = aTmp.Width(); |
| aSz.Height = aTmp.Height(); |
| xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz ); |
| } |
| } |
| |
| aSize = Size( aSz.Width, aSz.Height ); |
| |
| if( !aSize.Width() || !aSize.Height() ) |
| { |
| aSize = OutputDevice::LogicToLogic( Size(14100, 10000), MAP_100TH_MM, aMapUnit ); |
| aSz.Width = aSize.Width(); |
| aSz.Height = aSize.Height(); |
| xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz ); |
| } |
| |
| aSize = OutputDevice::LogicToLogic( aSize, aMapUnit, MAP_100TH_MM ); |
| } |
| |
| Size aMaxSize( mpDoc->GetMaxObjSize() ); |
| |
| maDropPos.X() -= Min( aSize.Width(), aMaxSize.Width() ) >> 1; |
| maDropPos.Y() -= Min( aSize.Height(), aMaxSize.Height() ) >> 1; |
| |
| Rectangle aRect( maDropPos, aSize ); |
| SdrOle2Obj* pObj = new SdrOle2Obj( aObjRef, aName, aRect ); |
| SdrPageView* pPV = GetSdrPageView(); |
| sal_uLong nOptions = SDRINSERT_SETDEFLAYER; |
| |
| if (mpViewSh!=NULL) |
| { |
| OSL_ASSERT (mpViewSh->GetViewShell()!=NULL); |
| SfxInPlaceClient* pIpClient |
| = mpViewSh->GetViewShell()->GetIPClient(); |
| if (pIpClient!=NULL && pIpClient->IsObjectInPlaceActive()) |
| nOptions |= SDRINSERT_DONTMARK; |
| } |
| |
| InsertObjectAtView( pObj, *pPV, nOptions ); |
| |
| if( pImageMap ) |
| pObj->InsertUserData( new SdIMapInfo( *pImageMap ) ); |
| |
| // let the object stay in loaded state after insertion |
| pObj->Unload(); |
| bReturn = true; |
| } |
| } |
| } |
| |
| if( !bReturn && aDataHelper.HasFormat( FORMAT_GDIMETAFILE ) ) |
| { |
| // if no object was inserted, insert a picture |
| InsertMetaFile( aDataHelper, rPos, pImageMap, true ); |
| bReturn = true; |
| } |
| } |
| |
| if(!bReturn && (!bLink || pPickObj) && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_SVXB)) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_SVXB, xStm ) ) |
| { |
| Point aInsertPos( rPos ); |
| Graphic aGraphic; |
| |
| *xStm >> aGraphic; |
| |
| if( pOwnData && pOwnData->GetWorkDocument() ) |
| { |
| const SdDrawDocument* pWorkModel = pOwnData->GetWorkDocument(); |
| SdrPage* pWorkPage = (SdrPage*) ( ( pWorkModel->GetPageCount() > 1 ) ? |
| pWorkModel->GetSdPage( 0, PK_STANDARD ) : |
| pWorkModel->GetPage( 0 ) ); |
| |
| pWorkPage->SetRectsDirty(); |
| |
| // #120393# Clipboard data uses full object geometry range |
| const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() ); |
| |
| aInsertPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 ); |
| aInsertPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 ); |
| } |
| |
| // #90129# restrict movement to WorkArea |
| Size aImageMapSize = OutputDevice::LogicToLogic(aGraphic.GetPrefSize(), |
| aGraphic.GetPrefMapMode(), MapMode(MAP_100TH_MM)); |
| |
| ImpCheckInsertPos(aInsertPos, aImageMapSize, GetWorkArea()); |
| |
| InsertGraphic( aGraphic, mnAction, aInsertPos, NULL, pImageMap ); |
| bReturn = true; |
| } |
| } |
| |
| if(!bReturn && (!bLink || pPickObj) && CHECK_FORMAT_TRANS(FORMAT_GDIMETAFILE)) |
| { |
| Point aInsertPos( rPos ); |
| |
| if( pOwnData && pOwnData->GetWorkDocument() ) |
| |
| { |
| const SdDrawDocument* pWorkModel = pOwnData->GetWorkDocument(); |
| SdrPage* pWorkPage = (SdrPage*) ( ( pWorkModel->GetPageCount() > 1 ) ? |
| pWorkModel->GetSdPage( 0, PK_STANDARD ) : |
| pWorkModel->GetPage( 0 ) ); |
| |
| pWorkPage->SetRectsDirty(); |
| |
| // #120393# Clipboard data uses full object geometry range |
| const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() ); |
| |
| aInsertPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 ); |
| aInsertPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 ); |
| } |
| |
| bReturn = InsertMetaFile( aDataHelper, aInsertPos, pImageMap, nFormat == 0 ? true : false ) ? sal_True : sal_False; |
| } |
| |
| if(!bReturn && (!bLink || pPickObj) && CHECK_FORMAT_TRANS(FORMAT_BITMAP)) |
| { |
| BitmapEx aBmpEx; |
| |
| // get basic Bitmap data |
| aDataHelper.GetBitmapEx(FORMAT_BITMAP, aBmpEx); |
| |
| if(aBmpEx.IsEmpty()) |
| { |
| // if this did not work, try to get graphic formats and convert these to bitmap |
| Graphic aGraphic; |
| |
| if(aDataHelper.GetGraphic(FORMAT_GDIMETAFILE, aGraphic)) |
| { |
| aBmpEx = aGraphic.GetBitmapEx(); |
| } |
| else if(aDataHelper.GetGraphic(SOT_FORMATSTR_ID_SVXB, aGraphic)) |
| { |
| aBmpEx = aGraphic.GetBitmapEx(); |
| } |
| else if(aDataHelper.GetGraphic(FORMAT_BITMAP, aGraphic)) |
| { |
| aBmpEx = aGraphic.GetBitmapEx(); |
| } |
| } |
| |
| if(!aBmpEx.IsEmpty()) |
| { |
| Point aInsertPos( rPos ); |
| |
| if( pOwnData && pOwnData->GetWorkDocument() ) |
| { |
| const SdDrawDocument* pWorkModel = pOwnData->GetWorkDocument(); |
| SdrPage* pWorkPage = (SdrPage*) ( ( pWorkModel->GetPageCount() > 1 ) ? |
| pWorkModel->GetSdPage( 0, PK_STANDARD ) : |
| pWorkModel->GetPage( 0 ) ); |
| |
| pWorkPage->SetRectsDirty(); |
| |
| // #120393# Clipboard data uses full object geometry range |
| const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() ); |
| |
| aInsertPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 ); |
| aInsertPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 ); |
| } |
| |
| // #90129# restrict movement to WorkArea |
| Size aImageMapSize(aBmpEx.GetPrefSize()); |
| ImpCheckInsertPos(aInsertPos, aImageMapSize, GetWorkArea()); |
| |
| InsertGraphic( aBmpEx, mnAction, aInsertPos, NULL, pImageMap ); |
| bReturn = true; |
| } |
| } |
| |
| if(!bReturn && pPickObj && CHECK_FORMAT_TRANS( SOT_FORMATSTR_ID_XFA ) ) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_XFA, xStm ) ) |
| { |
| XFillExchangeData aFillData( XFillAttrSetItem( &mpDoc->GetPool() ) ); |
| |
| *xStm >> aFillData; |
| |
| if( IsUndoEnabled() ) |
| { |
| BegUndo( String( SdResId( STR_UNDO_DRAGDROP ) ) ); |
| AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pPickObj ) ); |
| EndUndo(); |
| } |
| |
| XFillAttrSetItem* pSetItem = aFillData.GetXFillAttrSetItem(); |
| SfxItemSet rSet = pSetItem->GetItemSet(); |
| XFillStyle eFill= ( (XFillStyleItem&) rSet.Get( XATTR_FILLSTYLE ) ).GetValue(); |
| |
| if( eFill == XFILL_SOLID || eFill == XFILL_NONE ) |
| { |
| const XFillColorItem& rColItem = (XFillColorItem&) rSet.Get( XATTR_FILLCOLOR ); |
| Color aColor( rColItem.GetColorValue() ); |
| String aName( rColItem.GetName() ); |
| SfxItemSet aSet( mpDoc->GetPool() ); |
| sal_Bool bClosed = pPickObj->IsClosedObj(); |
| ::sd::Window* pWin = mpViewSh->GetActiveWindow(); |
| sal_uInt16 nHitLog = (sal_uInt16) pWin->PixelToLogic( |
| Size(FuPoor::HITPIX, 0 ) ).Width(); |
| const long n2HitLog = nHitLog << 1; |
| Point aHitPosR( rPos ); |
| Point aHitPosL( rPos ); |
| Point aHitPosT( rPos ); |
| Point aHitPosB( rPos ); |
| const SetOfByte* pVisiLayer = &GetSdrPageView()->GetVisibleLayers(); |
| |
| aHitPosR.X() += n2HitLog; |
| aHitPosL.X() -= n2HitLog; |
| aHitPosT.Y() += n2HitLog; |
| aHitPosB.Y() -= n2HitLog; |
| |
| if( bClosed && |
| SdrObjectPrimitiveHit(*pPickObj, aHitPosR, nHitLog, *GetSdrPageView(), pVisiLayer, false) && |
| SdrObjectPrimitiveHit(*pPickObj, aHitPosL, nHitLog, *GetSdrPageView(), pVisiLayer, false) && |
| SdrObjectPrimitiveHit(*pPickObj, aHitPosT, nHitLog, *GetSdrPageView(), pVisiLayer, false) && |
| SdrObjectPrimitiveHit(*pPickObj, aHitPosB, nHitLog, *GetSdrPageView(), pVisiLayer, false) ) |
| { |
| // area fill |
| if(eFill == XFILL_SOLID ) |
| aSet.Put(XFillColorItem(aName, aColor)); |
| |
| aSet.Put( XFillStyleItem( eFill ) ); |
| } |
| else |
| aSet.Put( XLineColorItem( aName, aColor ) ); |
| |
| // Textfarbe hinzufuegen |
| pPickObj->SetMergedItemSetAndBroadcast( aSet ); |
| } |
| } |
| } |
| |
| if(!bReturn && !bLink && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_HTML)) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_HTML, xStm ) ) |
| { |
| xStm->Seek( 0 ); |
| // mba: clipboard always must contain absolute URLs (could be from alien source) |
| bReturn = SdrView::Paste( *xStm, String(), EE_FORMAT_HTML, maDropPos, pPage, nPasteOptions ); |
| } |
| } |
| |
| if(!bReturn && !bLink && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EDITENGINE)) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_EDITENGINE, xStm ) ) |
| { |
| OutlinerView* pOLV = GetTextEditOutlinerView(); |
| |
| xStm->Seek( 0 ); |
| |
| if( pOLV ) |
| { |
| Rectangle aRect( pOLV->GetOutputArea() ); |
| Point aPos( pOLV->GetWindow()->PixelToLogic( maDropPos ) ); |
| |
| if( aRect.IsInside( aPos ) || ( !bDrag && IsTextEdit() ) ) |
| { |
| // mba: clipboard always must contain absolute URLs (could be from alien source) |
| pOLV->Read( *xStm, String(), EE_FORMAT_BIN, sal_False, mpDocSh->GetHeaderAttributes() ); |
| bReturn = true; |
| } |
| } |
| |
| if( !bReturn ) |
| // mba: clipboard always must contain absolute URLs (could be from alien source) |
| bReturn = SdrView::Paste( *xStm, String(), EE_FORMAT_BIN, maDropPos, pPage, nPasteOptions ); |
| } |
| } |
| |
| if(!bReturn && !bLink && CHECK_FORMAT_TRANS(FORMAT_RTF)) |
| { |
| SotStorageStreamRef xStm; |
| |
| if( aDataHelper.GetSotStorageStream( FORMAT_RTF, xStm ) ) |
| { |
| xStm->Seek( 0 ); |
| |
| if( bTable ) |
| { |
| bReturn = PasteRTFTable( xStm, pPage, nPasteOptions ); |
| } |
| else |
| { |
| OutlinerView* pOLV = GetTextEditOutlinerView(); |
| |
| if( pOLV ) |
| { |
| Rectangle aRect( pOLV->GetOutputArea() ); |
| Point aPos( pOLV->GetWindow()->PixelToLogic( maDropPos ) ); |
| |
| if( aRect.IsInside( aPos ) || ( !bDrag && IsTextEdit() ) ) |
| { |
| // mba: clipboard always must contain absolute URLs (could be from alien source) |
| pOLV->Read( *xStm, String(), EE_FORMAT_RTF, sal_False, mpDocSh->GetHeaderAttributes() ); |
| bReturn = true; |
| } |
| } |
| |
| if( !bReturn ) |
| // mba: clipboard always must contain absolute URLs (could be from alien source) |
| bReturn = SdrView::Paste( *xStm, String(), EE_FORMAT_RTF, maDropPos, pPage, nPasteOptions ); |
| } |
| } |
| } |
| |
| if(!bReturn && CHECK_FORMAT_TRANS(FORMAT_FILE_LIST)) |
| { |
| FileList aDropFileList; |
| |
| if( aDataHelper.GetFileList( FORMAT_FILE_LIST, aDropFileList ) ) |
| { |
| maDropFileVector.clear(); |
| |
| for( sal_uLong i = 0, nCount = aDropFileList.Count(); i < nCount; i++ ) |
| maDropFileVector.push_back( aDropFileList.GetFile( i ) ); |
| |
| maDropInsertFileTimer.Start(); |
| } |
| |
| bReturn = true; |
| } |
| |
| if(!bReturn && CHECK_FORMAT_TRANS(FORMAT_FILE)) |
| { |
| String aDropFile; |
| |
| if( aDataHelper.GetString( FORMAT_FILE, aDropFile ) ) |
| { |
| maDropFileVector.clear(); |
| maDropFileVector.push_back( aDropFile ); |
| maDropInsertFileTimer.Start(); |
| } |
| |
| bReturn = true; |
| } |
| |
| if(!bReturn && !bLink && CHECK_FORMAT_TRANS(FORMAT_STRING)) |
| { |
| if( ( FORMAT_STRING == nFormat ) || |
| ( !aDataHelper.HasFormat( SOT_FORMATSTR_ID_SOLK ) && |
| !aDataHelper.HasFormat( SOT_FORMATSTR_ID_NETSCAPE_BOOKMARK ) && |
| !aDataHelper.HasFormat( SOT_FORMATSTR_ID_FILENAME ) ) ) |
| { |
| ::rtl::OUString aOUString; |
| |
| if( aDataHelper.GetString( FORMAT_STRING, aOUString ) ) |
| { |
| OutlinerView* pOLV = GetTextEditOutlinerView(); |
| |
| if( pOLV ) |
| { |
| pOLV->InsertText( aOUString ); |
| bReturn = true; |
| } |
| |
| if( !bReturn ) |
| bReturn = SdrView::Paste( aOUString, maDropPos, pPage, nPasteOptions ); |
| } |
| } |
| } |
| |
| MarkListHasChanged(); |
| mbIsDropAllowed = sal_True; |
| rDnDAction = mnAction; |
| delete pImageMap; |
| |
| return bReturn; |
| } |
| |
| extern void CreateTableFromRTF( SvStream& rStream, SdDrawDocument* pModel ); |
| |
| bool View::PasteRTFTable( SotStorageStreamRef xStm, SdrPage* pPage, sal_uLong nPasteOptions ) |
| { |
| SdDrawDocument* pModel = new SdDrawDocument( DOCUMENT_TYPE_IMPRESS, mpDocSh ); |
| pModel->NewOrLoadCompleted(NEW_DOC); |
| pModel->GetItemPool().SetDefaultMetric(SFX_MAPUNIT_100TH_MM); |
| pModel->InsertPage(pModel->AllocPage(false)); |
| |
| Reference< XComponent > xComponent( new SdXImpressDocument( pModel, sal_True ) ); |
| pModel->setUnoModel( Reference< XInterface >::query( xComponent ) ); |
| |
| CreateTableFromRTF( *xStm, pModel ); |
| bool bRet = Paste( *pModel, maDropPos, pPage, nPasteOptions ); |
| |
| xComponent->dispose(); |
| xComponent.clear(); |
| |
| delete pModel; |
| |
| return bRet; |
| } |
| |
| } // end of namespace sd |
