AOO410/main/sd/source/ui/func/fuconrec.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sd.hxx"

#include "fuconrec.hxx"
#include <svx/svdpagv.hxx>


#include <svx/svxids.hrc>
#include <svx/dialogs.hrc>
#include <svx/dialmgr.hxx>

#include "app.hrc"
#include <svl/aeitem.hxx>
#include <svx/xlnstwit.hxx>
#include <svx/xlnedwit.hxx>
#include <svx/xlnedit.hxx>
#include <svx/xlnstit.hxx>
#include <svx/xlnwtit.hxx>
#include <sfx2/viewfrm.hxx>
#include <svx/sdtmfitm.hxx>
#include <svx/sxekitm.hxx>
#include <svx/sderitm.hxx>
#include <sfx2/dispatch.hxx>
#include <svx/svdopath.hxx>
#include <svx/svdocirc.hxx>
#include <svl/intitem.hxx>
#include <sfx2/request.hxx>
#include <editeng/adjitem.hxx>
#include <svx/xtable.hxx>

// #88751#
#include <svx/svdocapt.hxx>

// #97016#
#include <svx/svdomeas.hxx>
#include "ViewShell.hxx"
#include "ViewShellBase.hxx"
#include "ToolBarManager.hxx"
// #109583#
#include <editeng/writingmodeitem.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>

#include "sdresid.hxx"
#include "View.hxx"
#include "sdpage.hxx"
#include "Window.hxx"
#include "stlpool.hxx"
#include "drawdoc.hxx"
#include "res_bmp.hrc"
#include "glob.hrc"

namespace sd {

TYPEINIT1( FuConstructRectangle, FuConstruct );

/*************************************************************************
|*
|* Konstruktor
|*
\************************************************************************/

FuConstructRectangle::FuConstructRectangle (
    ViewShell* 	pViewSh,
    ::sd::Window*		pWin,
    ::sd::View*			pView,
    SdDrawDocument*	pDoc,
    SfxRequest&		rReq)
    : FuConstruct(pViewSh, pWin, pView, pDoc, rReq)
{
}

FunctionReference FuConstructRectangle::Create( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq, bool bPermanent )
{
	FuConstructRectangle* pFunc;
	FunctionReference xFunc( pFunc = new FuConstructRectangle( pViewSh, pWin, pView, pDoc, rReq ) );
	xFunc->DoExecute(rReq);
	pFunc->SetPermanent(bPermanent);
	return xFunc;
}

void FuConstructRectangle::DoExecute( SfxRequest& rReq )
{
	FuConstruct::DoExecute( rReq );

    mpViewShell->GetViewShellBase().GetToolBarManager()->SetToolBar(
        ToolBarManager::TBG_FUNCTION,
        ToolBarManager::msDrawingObjectToolBar);

	const SfxItemSet *pArgs = rReq.GetArgs ();

	if (pArgs)
	{
		switch (nSlotId)
		{
			case SID_DRAW_ELLIPSE :
			{
				SFX_REQUEST_ARG (rReq, pCenterX, SfxUInt32Item, ID_VAL_CENTER_X, sal_False);
				SFX_REQUEST_ARG (rReq, pCenterY, SfxUInt32Item, ID_VAL_CENTER_Y, sal_False);
				SFX_REQUEST_ARG (rReq, pAxisX, SfxUInt32Item, ID_VAL_AXIS_X, sal_False);
				SFX_REQUEST_ARG (rReq, pAxisY, SfxUInt32Item, ID_VAL_AXIS_Y, sal_False);

				Rectangle	aNewRectangle (pCenterX->GetValue () - pAxisX->GetValue () / 2,
										   pCenterY->GetValue () - pAxisY->GetValue () / 2,
										   pCenterX->GetValue () + pAxisX->GetValue () / 2,
										   pCenterY->GetValue () + pAxisY->GetValue () / 2);
				SdrCircObj	*pNewCircle = new SdrCircObj (OBJ_CIRC, aNewRectangle);
				SdrPageView *pPV = mpView->GetSdrPageView();

				mpView->InsertObjectAtView(pNewCircle, *pPV, SDRINSERT_SETDEFLAYER | SDRINSERT_SETDEFATTR);
			}
			break;

			case SID_DRAW_RECT :
			{
				SFX_REQUEST_ARG (rReq, pMouseStartX, SfxUInt32Item, ID_VAL_MOUSESTART_X, sal_False);
				SFX_REQUEST_ARG (rReq, pMouseStartY, SfxUInt32Item, ID_VAL_MOUSESTART_Y, sal_False);
				SFX_REQUEST_ARG (rReq, pMouseEndX, SfxUInt32Item, ID_VAL_MOUSEEND_X, sal_False);
				SFX_REQUEST_ARG (rReq, pMouseEndY, SfxUInt32Item, ID_VAL_MOUSEEND_Y, sal_False);

				Rectangle	aNewRectangle (pMouseStartX->GetValue (),
										   pMouseStartY->GetValue (),
										   pMouseEndX->GetValue (),
										   pMouseEndY->GetValue ());
				SdrRectObj	*pNewRect = new SdrRectObj (aNewRectangle);
				SdrPageView *pPV = mpView->GetSdrPageView();

				mpView->InsertObjectAtView(pNewRect, *pPV, SDRINSERT_SETDEFLAYER | SDRINSERT_SETDEFATTR);
			}
			break;
		}
	}

	if (nSlotId == SID_TOOL_CONNECTOR               ||
		nSlotId == SID_CONNECTOR_ARROW_START        ||
		nSlotId == SID_CONNECTOR_ARROW_END          ||
		nSlotId == SID_CONNECTOR_ARROWS             ||
		nSlotId == SID_CONNECTOR_CIRCLE_START       ||
		nSlotId == SID_CONNECTOR_CIRCLE_END         ||
		nSlotId == SID_CONNECTOR_CIRCLES            ||
		nSlotId == SID_CONNECTOR_LINE               ||
		nSlotId == SID_CONNECTOR_LINE_ARROW_START   ||
		nSlotId == SID_CONNECTOR_LINE_ARROW_END     ||
		nSlotId == SID_CONNECTOR_LINE_ARROWS        ||
		nSlotId == SID_CONNECTOR_LINE_CIRCLE_START  ||
		nSlotId == SID_CONNECTOR_LINE_CIRCLE_END    ||
		nSlotId == SID_CONNECTOR_LINE_CIRCLES       ||
		nSlotId == SID_CONNECTOR_CURVE              ||
		nSlotId == SID_CONNECTOR_CURVE_ARROW_START  ||
		nSlotId == SID_CONNECTOR_CURVE_ARROW_END    ||
		nSlotId == SID_CONNECTOR_CURVE_ARROWS       ||
		nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START ||
		nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END   ||
		nSlotId == SID_CONNECTOR_CURVE_CIRCLES      ||
		nSlotId == SID_CONNECTOR_LINES              ||
		nSlotId == SID_CONNECTOR_LINES_ARROW_START  ||
		nSlotId == SID_CONNECTOR_LINES_ARROW_END    ||
		nSlotId == SID_CONNECTOR_LINES_ARROWS       ||
		nSlotId == SID_CONNECTOR_LINES_CIRCLE_START ||
		nSlotId == SID_CONNECTOR_LINES_CIRCLE_END   ||
		nSlotId == SID_CONNECTOR_LINES_CIRCLES		||
		nSlotId == SID_LINE_ARROW_START				||
		nSlotId == SID_LINE_ARROW_END				||
		nSlotId == SID_LINE_ARROWS					||
		nSlotId == SID_LINE_ARROW_CIRCLE			||
		nSlotId == SID_LINE_CIRCLE_ARROW			||
		nSlotId == SID_LINE_ARROW_SQUARE			||
		nSlotId == SID_LINE_SQUARE_ARROW )
	{
		mpView->UnmarkAll();
	}
}

/*************************************************************************
|*
|* MouseButtonDown-event
|*
\************************************************************************/

sal_Bool FuConstructRectangle::MouseButtonDown(const MouseEvent& rMEvt)
{
	sal_Bool bReturn = FuConstruct::MouseButtonDown(rMEvt);

	if ( rMEvt.IsLeft() && !mpView->IsAction() )
	{
		Point aPnt( mpWindow->PixelToLogic( rMEvt.GetPosPixel() ) );

		mpWindow->CaptureMouse();
		sal_uInt16 nDrgLog = sal_uInt16 ( mpWindow->PixelToLogic(Size(DRGPIX,0)).Width() );

		if (mpView->GetCurrentObjIdentifier() == OBJ_CAPTION)
		{
			Size aCaptionSize(846, 846);    // (4x2)cm
			bReturn = mpView->BegCreateCaptionObj(aPnt, aCaptionSize,
												(OutputDevice*) NULL, nDrgLog);
		}
		else
		{
			mpView->BegCreateObj(aPnt, (OutputDevice*) NULL, nDrgLog);
		}

		SdrObject* pObj = mpView->GetCreateObj();

		if (pObj)
		{
			SfxItemSet aAttr(mpDoc->GetPool());
			SetStyleSheet(aAttr, pObj);
			SetAttributes(aAttr, pObj);
			SetLineEnds(aAttr, pObj);
			pObj->SetMergedItemSet(aAttr);

			if( nSlotId == SID_DRAW_CAPTION_VERTICAL )
				( (SdrTextObj*) pObj)->SetVerticalWriting( sal_True );
		}
	}
	return bReturn;
}

/*************************************************************************
|*
|* MouseMove-event
|*
\************************************************************************/

sal_Bool FuConstructRectangle::MouseMove(const MouseEvent& rMEvt)
{
	return FuConstruct::MouseMove(rMEvt);
}

/*************************************************************************
|*
|* MouseButtonUp-event
|*
\************************************************************************/

sal_Bool FuConstructRectangle::MouseButtonUp(const MouseEvent& rMEvt)
{
	sal_Bool bReturn(sal_False);

	if(mpView->IsCreateObj() && rMEvt.IsLeft())
	{
		SdrObject* pObj = mpView->GetCreateObj();

		if(pObj && mpView->EndCreateObj(SDRCREATE_FORCEEND))
		{
			if(SID_DRAW_MEASURELINE == nSlotId)
			{
				SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin();
				String aStr(SdResId(STR_LAYER_MEASURELINES));
				pObj->SetLayer(rAdmin.GetLayerID(aStr, sal_False));
			}

			// #88751# init text position when vertica caption object is created
			if(pObj->ISA(SdrCaptionObj) && SID_DRAW_CAPTION_VERTICAL == nSlotId)
			{
				// draw text object, needs to be initialized when vertical text is used
				SfxItemSet aSet(pObj->GetMergedItemSet());

				aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER));
				aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT));

				// #109583#
				// Correct the value of SDRATTR_TEXTDIRECTION to avoid SetItemSet
				// calling SetVerticalWriting() again since this item may not yet
				// be set at the object and thus may differ from verical state of
				// the object.
                aSet.Put(SvxWritingModeItem(com::sun::star::text::WritingMode_TB_RL, SDRATTR_TEXTDIRECTION));
				pObj->SetMergedItemSet(aSet);
			}

			bReturn = sal_True;
		}
	}

	bReturn = FuConstruct::MouseButtonUp (rMEvt) || bReturn;

	if (!bPermanent)
		mpViewShell->GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SFX_CALLMODE_ASYNCHRON);

	return bReturn;
}

/*************************************************************************
|*
|* Tastaturereignisse bearbeiten
|*
|* Wird ein KeyEvent bearbeitet, so ist der Return-Wert sal_True, andernfalls
|* sal_False.
|*
\************************************************************************/

sal_Bool FuConstructRectangle::KeyInput(const KeyEvent& rKEvt)
{
	sal_Bool bReturn = FuConstruct::KeyInput(rKEvt);
	return(bReturn);
}

/*************************************************************************
|*
|* Function aktivieren
|*
\************************************************************************/

void FuConstructRectangle::Activate()
{
	SdrObjKind aObjKind;

	switch (nSlotId)
	{
		case SID_LINE_ARROW_START:
		case SID_LINE_ARROW_END:
		case SID_LINE_ARROWS:
		case SID_LINE_ARROW_CIRCLE:
		case SID_LINE_CIRCLE_ARROW:
		case SID_LINE_ARROW_SQUARE:
		case SID_LINE_SQUARE_ARROW:
			mpView->SetGlueVisible();
			// keine break !
		case SID_DRAW_LINE :
		case SID_DRAW_XLINE:
			aObjKind = OBJ_LINE;
			break;

		case SID_DRAW_MEASURELINE:
		{
			aObjKind = OBJ_MEASURE;
		}
		break;

		case SID_DRAW_RECT             :
		case SID_DRAW_RECT_NOFILL	   :
		case SID_DRAW_RECT_ROUND	   :
		case SID_DRAW_RECT_ROUND_NOFILL:
		case SID_DRAW_SQUARE		   :
		case SID_DRAW_SQUARE_NOFILL    :
		case SID_DRAW_SQUARE_ROUND	   :
		case SID_DRAW_SQUARE_ROUND_NOFILL:
		{
			aObjKind = OBJ_RECT;
		}
		break;

		case SID_DRAW_ELLIPSE		:
		case SID_DRAW_ELLIPSE_NOFILL:
		case SID_DRAW_CIRCLE		:
		case SID_DRAW_CIRCLE_NOFILL :
		{
			aObjKind = OBJ_CIRC;
		}
		break;

		case SID_DRAW_CAPTION:
		case SID_DRAW_CAPTION_VERTICAL:
		{
			aObjKind = OBJ_CAPTION;
		}
		break;

		case SID_TOOL_CONNECTOR:
		case SID_CONNECTOR_ARROW_START:
		case SID_CONNECTOR_ARROW_END:
		case SID_CONNECTOR_ARROWS:
		case SID_CONNECTOR_CIRCLE_START:
		case SID_CONNECTOR_CIRCLE_END:
		case SID_CONNECTOR_CIRCLES:
		case SID_CONNECTOR_LINE:
		case SID_CONNECTOR_LINE_ARROW_START:
		case SID_CONNECTOR_LINE_ARROW_END:
		case SID_CONNECTOR_LINE_ARROWS:
		case SID_CONNECTOR_LINE_CIRCLE_START:
		case SID_CONNECTOR_LINE_CIRCLE_END:
		case SID_CONNECTOR_LINE_CIRCLES:
		case SID_CONNECTOR_CURVE:
		case SID_CONNECTOR_CURVE_ARROW_START:
		case SID_CONNECTOR_CURVE_ARROW_END:
		case SID_CONNECTOR_CURVE_ARROWS:
		case SID_CONNECTOR_CURVE_CIRCLE_START:
		case SID_CONNECTOR_CURVE_CIRCLE_END:
		case SID_CONNECTOR_CURVE_CIRCLES:
		case SID_CONNECTOR_LINES:
		case SID_CONNECTOR_LINES_ARROW_START:
		case SID_CONNECTOR_LINES_ARROW_END:
		case SID_CONNECTOR_LINES_ARROWS:
		case SID_CONNECTOR_LINES_CIRCLE_START:
		case SID_CONNECTOR_LINES_CIRCLE_END:
		case SID_CONNECTOR_LINES_CIRCLES:
		{
			aObjKind = OBJ_EDGE;
			mpView->SetGlueVisible();
		}
		break;

		default:
		{
			aObjKind = OBJ_RECT;
		}
		break;
	}

	mpView->SetCurrentObj((sal_uInt16)aObjKind);

	FuConstruct::Activate();
}

/*************************************************************************
|*
|* Function deaktivieren
|*
\************************************************************************/

void FuConstructRectangle::Deactivate()
{
	if( nSlotId == SID_TOOL_CONNECTOR               ||
		nSlotId == SID_CONNECTOR_ARROW_START        ||
		nSlotId == SID_CONNECTOR_ARROW_END          ||
		nSlotId == SID_CONNECTOR_ARROWS             ||
		nSlotId == SID_CONNECTOR_CIRCLE_START       ||
		nSlotId == SID_CONNECTOR_CIRCLE_END         ||
		nSlotId == SID_CONNECTOR_CIRCLES            ||
		nSlotId == SID_CONNECTOR_LINE               ||
		nSlotId == SID_CONNECTOR_LINE_ARROW_START   ||
		nSlotId == SID_CONNECTOR_LINE_ARROW_END     ||
		nSlotId == SID_CONNECTOR_LINE_ARROWS        ||
		nSlotId == SID_CONNECTOR_LINE_CIRCLE_START  ||
		nSlotId == SID_CONNECTOR_LINE_CIRCLE_END    ||
		nSlotId == SID_CONNECTOR_LINE_CIRCLES       ||
		nSlotId == SID_CONNECTOR_CURVE              ||
		nSlotId == SID_CONNECTOR_CURVE_ARROW_START  ||
		nSlotId == SID_CONNECTOR_CURVE_ARROW_END    ||
		nSlotId == SID_CONNECTOR_CURVE_ARROWS       ||
		nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START ||
		nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END   ||
		nSlotId == SID_CONNECTOR_CURVE_CIRCLES      ||
		nSlotId == SID_CONNECTOR_LINES              ||
		nSlotId == SID_CONNECTOR_LINES_ARROW_START  ||
		nSlotId == SID_CONNECTOR_LINES_ARROW_END    ||
		nSlotId == SID_CONNECTOR_LINES_ARROWS       ||
		nSlotId == SID_CONNECTOR_LINES_CIRCLE_START ||
		nSlotId == SID_CONNECTOR_LINES_CIRCLE_END   ||
		nSlotId == SID_CONNECTOR_LINES_CIRCLES		||
		nSlotId == SID_LINE_ARROW_START				||
		nSlotId == SID_LINE_ARROW_END				||
		nSlotId == SID_LINE_ARROWS					||
		nSlotId == SID_LINE_ARROW_CIRCLE			||
		nSlotId == SID_LINE_CIRCLE_ARROW			||
		nSlotId == SID_LINE_ARROW_SQUARE			||
		nSlotId == SID_LINE_SQUARE_ARROW )
	{
		mpView->SetGlueVisible( sal_False );
	}
	FuConstruct::Deactivate();
}


/*************************************************************************
|*
|* Attribute fuer das zu erzeugende Objekt setzen
|*
\************************************************************************/

void FuConstructRectangle::SetAttributes(SfxItemSet& rAttr, SdrObject* pObj)
{
	if (nSlotId == SID_DRAW_RECT_ROUND        ||
		nSlotId == SID_DRAW_RECT_ROUND_NOFILL ||
		nSlotId == SID_DRAW_SQUARE_ROUND      ||
		nSlotId == SID_DRAW_SQUARE_ROUND_NOFILL)
	{
		/**********************************************************************
		* Abgerundete Ecken
		**********************************************************************/
		rAttr.Put(SdrEckenradiusItem(500));
	}
	else if (nSlotId == SID_CONNECTOR_LINE              ||
			 nSlotId == SID_CONNECTOR_LINE_ARROW_START  ||
			 nSlotId == SID_CONNECTOR_LINE_ARROW_END    ||
			 nSlotId == SID_CONNECTOR_LINE_ARROWS       ||
			 nSlotId == SID_CONNECTOR_LINE_CIRCLE_START ||
			 nSlotId == SID_CONNECTOR_LINE_CIRCLE_END   ||
			 nSlotId == SID_CONNECTOR_LINE_CIRCLES)
	{
		/**********************************************************************
		* Direkt-Verbinder
		**********************************************************************/
		rAttr.Put(SdrEdgeKindItem(SDREDGE_ONELINE));
	}
	else if (nSlotId == SID_CONNECTOR_LINES              ||
			 nSlotId == SID_CONNECTOR_LINES_ARROW_START  ||
			 nSlotId == SID_CONNECTOR_LINES_ARROW_END    ||
			 nSlotId == SID_CONNECTOR_LINES_ARROWS       ||
			 nSlotId == SID_CONNECTOR_LINES_CIRCLE_START ||
			 nSlotId == SID_CONNECTOR_LINES_CIRCLE_END   ||
			 nSlotId == SID_CONNECTOR_LINES_CIRCLES)
	{
		/**********************************************************************
		* Linien-Verbinder
		**********************************************************************/
		rAttr.Put(SdrEdgeKindItem(SDREDGE_THREELINES));
	}
	else if (nSlotId == SID_CONNECTOR_CURVE              ||
			 nSlotId == SID_CONNECTOR_CURVE_ARROW_START  ||
			 nSlotId == SID_CONNECTOR_CURVE_ARROW_END    ||
			 nSlotId == SID_CONNECTOR_CURVE_ARROWS       ||
			 nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START ||
			 nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END   ||
			 nSlotId == SID_CONNECTOR_CURVE_CIRCLES)
	{
		/**********************************************************************
		* Kurven-Verbinder
		**********************************************************************/
		rAttr.Put(SdrEdgeKindItem(SDREDGE_BEZIER));
	}
	else if ( nSlotId == SID_DRAW_CAPTION || nSlotId == SID_DRAW_CAPTION_VERTICAL )
	{
		/**********************************************************************
		* Legendenobjekt
		**********************************************************************/
		Size aSize(pObj->GetLogicRect().GetSize());
		rAttr.Put( SdrTextMinFrameHeightItem( aSize.Height() ) );
		rAttr.Put( SdrTextMinFrameWidthItem( aSize.Width() ) );
		rAttr.Put( SdrTextAutoGrowHeightItem( sal_True ) );
		rAttr.Put( SdrTextAutoGrowWidthItem( sal_True ) );

		// #103516# Support full with for vertical caption objects, too
		if(SID_DRAW_CAPTION == nSlotId)
			rAttr.Put( SdrTextHorzAdjustItem( SDRTEXTHORZADJUST_BLOCK ) );
		else
			rAttr.Put( SdrTextVertAdjustItem( SDRTEXTVERTADJUST_BLOCK ) );

        rAttr.Put( SvxAdjustItem( SVX_ADJUST_CENTER, EE_PARA_JUST ) );
		rAttr.Put( SdrTextLeftDistItem( 100 ) );
		rAttr.Put( SdrTextRightDistItem( 100 ) );
		rAttr.Put( SdrTextUpperDistItem( 100 ) );
		rAttr.Put( SdrTextLowerDistItem( 100 ) );
	}
	else if (nSlotId == SID_DRAW_MEASURELINE)
	{
		/**********************************************************************
		* Masslinie
		**********************************************************************/
		SdPage* pPage = (SdPage*) mpView->GetSdrPageView()->GetPage();
		String aName(SdResId(STR_POOLSHEET_MEASURE));
		SfxStyleSheet* pSheet = (SfxStyleSheet*) pPage->GetModel()->
									 GetStyleSheetPool()->
									 Find(aName, SD_STYLE_FAMILY_GRAPHICS);
		DBG_ASSERT(pSheet, "Objektvorlage nicht gefunden");

		if (pSheet)
		{
			pObj->SetStyleSheet(pSheet, sal_False);
		}

		SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin();
		String aStr(SdResId(STR_LAYER_MEASURELINES));
		pObj->SetLayer(rAdmin.GetLayerID(aStr, sal_False));
	}
	else if (nSlotId == OBJ_CUSTOMSHAPE )
	{
	}
}


/*************************************************************************
|*
|* Linienanfaenge und -enden fuer das zu erzeugende Objekt setzen
|*
\************************************************************************/

::basegfx::B2DPolyPolygon getPolygon( sal_uInt16 nResId, SdrModel* pDoc )
{
	::basegfx::B2DPolyPolygon aRetval;
	XLineEndListSharedPtr aLineEndList = pDoc->GetLineEndListFromSdrModel();

	if( aLineEndList.get() )
	{
		String aArrowName( SVX_RES(nResId) );
		long nCount = aLineEndList->Count();
		long nIndex;
		for( nIndex = 0L; nIndex < nCount; nIndex++ )
		{
			XLineEndEntry* pEntry = aLineEndList->GetLineEnd(nIndex);
			if( pEntry->GetName() == aArrowName )
			{
				aRetval = pEntry->GetLineEnd();
				break;
			}
		}
	}

	return aRetval;
}

void FuConstructRectangle::SetLineEnds(SfxItemSet& rAttr, SdrObject* pObj)
{
	if ( (pObj->GetObjIdentifier() == OBJ_EDGE &&
		  nSlotId != SID_TOOL_CONNECTOR        &&
		  nSlotId != SID_CONNECTOR_LINE        &&
		  nSlotId != SID_CONNECTOR_LINES       &&
		  nSlotId != SID_CONNECTOR_CURVE)      ||
		  nSlotId == SID_LINE_ARROW_START      ||
		  nSlotId == SID_LINE_ARROW_END        ||
		  nSlotId == SID_LINE_ARROWS           ||
		  nSlotId == SID_LINE_ARROW_CIRCLE     ||
		  nSlotId == SID_LINE_CIRCLE_ARROW     ||
		  nSlotId == SID_LINE_ARROW_SQUARE     ||
		  nSlotId == SID_LINE_SQUARE_ARROW )
	{
		/**************************************************************
		* Linienanfaenge und -enden attributieren
		**************************************************************/

		// Pfeilspitze
		::basegfx::B2DPolyPolygon aArrow( getPolygon( RID_SVXSTR_ARROW, mpDoc ) );
		if( !aArrow.count() )
		{
			::basegfx::B2DPolygon aNewArrow;
			aNewArrow.append(::basegfx::B2DPoint(10.0, 0.0));
			aNewArrow.append(::basegfx::B2DPoint(0.0, 30.0));
			aNewArrow.append(::basegfx::B2DPoint(20.0, 30.0));
			aNewArrow.setClosed(true);
			aArrow.append(aNewArrow);
		}

		// Kreis
		::basegfx::B2DPolyPolygon aCircle( getPolygon( RID_SVXSTR_CIRCLE, mpDoc ) );
		if( !aCircle.count() )
		{
			::basegfx::B2DPolygon aNewCircle;
			aNewCircle = ::basegfx::tools::createPolygonFromEllipse(::basegfx::B2DPoint(0.0, 0.0), 250.0, 250.0);
			aNewCircle.setClosed(true);
			aCircle.append(aNewCircle);
		}

		// Quadrat
		::basegfx::B2DPolyPolygon aSquare( getPolygon( RID_SVXSTR_SQUARE, mpDoc ) );
		if( !aSquare.count() )
		{
			::basegfx::B2DPolygon aNewSquare;
			aNewSquare.append(::basegfx::B2DPoint(0.0, 0.0));
			aNewSquare.append(::basegfx::B2DPoint(10.0, 0.0));
			aNewSquare.append(::basegfx::B2DPoint(10.0, 10.0));
			aNewSquare.append(::basegfx::B2DPoint(0.0, 10.0));
			aNewSquare.setClosed(true);
			aSquare.append(aNewSquare);
		}

		SfxItemSet aSet( mpDoc->GetPool() );
		mpView->GetAttributes( aSet );

		// #i3908# Here, the default Line Start/End width for arrow construction is
		// set. To have the same value in all situations (construction) in i3908
		// it was decided to change the default to 0.03 cm for all situations.
		long nWidth = 300; // (1/100th mm)

		// Linienstaerke ermitteln und daraus die Linienendenstaerke berechnen
		if( aSet.GetItemState( XATTR_LINEWIDTH ) != SFX_ITEM_DONTCARE )
		{
			long nValue = ( ( const XLineWidthItem& ) aSet.Get( XATTR_LINEWIDTH ) ).GetValue();
			if( nValue > 0 )
				nWidth = nValue * 3;
		}

		switch (nSlotId)
		{
			case SID_CONNECTOR_ARROWS:
			case SID_CONNECTOR_LINE_ARROWS:
			case SID_CONNECTOR_LINES_ARROWS:
			case SID_CONNECTOR_CURVE_ARROWS:
			case SID_LINE_ARROWS:
			{
				// Verbinder mit Pfeil-Enden
				rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow));
				rAttr.Put(XLineStartWidthItem(nWidth));
				rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow));
				rAttr.Put(XLineEndWidthItem(nWidth));
			}
			break;

			case SID_CONNECTOR_ARROW_START:
			case SID_CONNECTOR_LINE_ARROW_START:
			case SID_CONNECTOR_LINES_ARROW_START:
			case SID_CONNECTOR_CURVE_ARROW_START:
			case SID_LINE_ARROW_START:
			case SID_LINE_ARROW_CIRCLE:
			case SID_LINE_ARROW_SQUARE:
			{
				// Verbinder mit Pfeil-Anfang
				rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow));
				rAttr.Put(XLineStartWidthItem(nWidth));
			}
			break;

			case SID_CONNECTOR_ARROW_END:
			case SID_CONNECTOR_LINE_ARROW_END:
			case SID_CONNECTOR_LINES_ARROW_END:
			case SID_CONNECTOR_CURVE_ARROW_END:
			case SID_LINE_ARROW_END:
			case SID_LINE_CIRCLE_ARROW:
			case SID_LINE_SQUARE_ARROW:
			{
				// Verbinder mit Pfeil-Ende
				rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow));
				rAttr.Put(XLineEndWidthItem(nWidth));
			}
			break;

			case SID_CONNECTOR_CIRCLES:
			case SID_CONNECTOR_LINE_CIRCLES:
			case SID_CONNECTOR_LINES_CIRCLES:
			case SID_CONNECTOR_CURVE_CIRCLES:
			{
				// Verbinder mit Kreis-Enden
				rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle));
				rAttr.Put(XLineStartWidthItem(nWidth));
				rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle));
				rAttr.Put(XLineEndWidthItem(nWidth));
			}
			break;

			case SID_CONNECTOR_CIRCLE_START:
			case SID_CONNECTOR_LINE_CIRCLE_START:
			case SID_CONNECTOR_LINES_CIRCLE_START:
			case SID_CONNECTOR_CURVE_CIRCLE_START:
			{
				// Verbinder mit Kreis-Anfang
				rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle));
				rAttr.Put(XLineStartWidthItem(nWidth));
			}
			break;

			case SID_CONNECTOR_CIRCLE_END:
			case SID_CONNECTOR_LINE_CIRCLE_END:
			case SID_CONNECTOR_LINES_CIRCLE_END:
			case SID_CONNECTOR_CURVE_CIRCLE_END:
			{
				// Verbinder mit Kreis-Ende
				rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle));
				rAttr.Put(XLineEndWidthItem(nWidth));
			}
			break;
		};

		// Und nochmal fuer die noch fehlenden Enden
		switch (nSlotId)
		{
			case SID_LINE_ARROW_CIRCLE:
			{
				// Kreis-Ende
				rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle));
				rAttr.Put(XLineEndWidthItem(nWidth));
			}
			break;

			case SID_LINE_CIRCLE_ARROW:
			{
				// Kreis-Anfang
				rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle));
				rAttr.Put(XLineStartWidthItem(nWidth));
			}
			break;

			case SID_LINE_ARROW_SQUARE:
			{
				// Quadrat-Ende
				rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_SQUARE), aSquare));
				rAttr.Put(XLineEndWidthItem(nWidth));
			}
			break;

			case SID_LINE_SQUARE_ARROW:
			{
				// Quadrat-Anfang
				rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_SQUARE), aSquare));
				rAttr.Put(XLineStartWidthItem(nWidth));
			}
			break;
		}
	}
}

// #97016#
SdrObject* FuConstructRectangle::CreateDefaultObject(const sal_uInt16 nID, const Rectangle& rRectangle)
{
	DBG_ASSERT( (nID != SID_DRAW_FONTWORK) && (nID != SID_DRAW_FONTWORK_VERTICAL ), "FuConstRectangle::CreateDefaultObject can not create Fontwork shapes!" );

	// case SID_DRAW_LINE:
	// case SID_DRAW_XLINE:
    // case SID_DRAW_MEASURELINE:
	// case SID_LINE_ARROW_START:
	// case SID_LINE_ARROW_END:
	// case SID_LINE_ARROWS:
	// case SID_LINE_ARROW_CIRCLE:
	// case SID_LINE_CIRCLE_ARROW:
	// case SID_LINE_ARROW_SQUARE:
	// case SID_LINE_SQUARE_ARROW:
	// case SID_DRAW_RECT:
	// case SID_DRAW_RECT_NOFILL:
	// case SID_DRAW_RECT_ROUND:
	// case SID_DRAW_RECT_ROUND_NOFILL:
	// case SID_DRAW_SQUARE:
	// case SID_DRAW_SQUARE_NOFILL:
	// case SID_DRAW_SQUARE_ROUND:
	// case SID_DRAW_SQUARE_ROUND_NOFILL:
	// case SID_DRAW_ELLIPSE:
	// case SID_DRAW_ELLIPSE_NOFILL:
	// case SID_DRAW_CIRCLE:
	// case SID_DRAW_CIRCLE_NOFILL:
	// case SID_DRAW_CAPTION:
	// case SID_DRAW_CAPTION_VERTICAL:
	// case SID_TOOL_CONNECTOR:
    // case SID_CONNECTOR_ARROW_START:
    // case SID_CONNECTOR_ARROW_END:
    // case SID_CONNECTOR_ARROWS:
    // case SID_CONNECTOR_CIRCLE_START:
    // case SID_CONNECTOR_CIRCLE_END:
    // case SID_CONNECTOR_CIRCLES:
    // case SID_CONNECTOR_LINE:
    // case SID_CONNECTOR_LINE_ARROW_START:
    // case SID_CONNECTOR_LINE_ARROW_END:
    // case SID_CONNECTOR_LINE_ARROWS:
    // case SID_CONNECTOR_LINE_CIRCLE_START:
    // case SID_CONNECTOR_LINE_CIRCLE_END:
    // case SID_CONNECTOR_LINE_CIRCLES:
    // case SID_CONNECTOR_CURVE:
    // case SID_CONNECTOR_CURVE_ARROW_START:
    // case SID_CONNECTOR_CURVE_ARROW_END:
    // case SID_CONNECTOR_CURVE_ARROWS:
    // case SID_CONNECTOR_CURVE_CIRCLE_START:
    // case SID_CONNECTOR_CURVE_CIRCLE_END:
    // case SID_CONNECTOR_CURVE_CIRCLES:
    // case SID_CONNECTOR_LINES:
    // case SID_CONNECTOR_LINES_ARROW_START:
    // case SID_CONNECTOR_LINES_ARROW_END:
    // case SID_CONNECTOR_LINES_ARROWS:
    // case SID_CONNECTOR_LINES_CIRCLE_START:
    // case SID_CONNECTOR_LINES_CIRCLE_END:
    // case SID_CONNECTOR_LINES_CIRCLES:

	SdrObject* pObj = SdrObjFactory::MakeNewObject(
		mpView->GetCurrentObjInventor(), mpView->GetCurrentObjIdentifier(),
		0L, mpDoc);

	if(pObj)
	{
		Rectangle aRect(rRectangle);

		if(SID_DRAW_SQUARE == nID ||
			SID_DRAW_SQUARE_NOFILL == nID ||
			SID_DRAW_SQUARE_ROUND == nID ||
			SID_DRAW_SQUARE_ROUND_NOFILL == nID ||
			SID_DRAW_CIRCLE == nID ||
			SID_DRAW_CIRCLE_NOFILL == nID)
		{
			// force quadratic
			ImpForceQuadratic(aRect);
		}

		Point aStart = aRect.TopLeft();
		Point aEnd = aRect.BottomRight();

		switch(nID)
		{
			case SID_DRAW_LINE:
			case SID_DRAW_XLINE:
			case SID_LINE_ARROW_START:
			case SID_LINE_ARROW_END:
			case SID_LINE_ARROWS:
			case SID_LINE_ARROW_CIRCLE:
			case SID_LINE_CIRCLE_ARROW:
			case SID_LINE_ARROW_SQUARE:
			case SID_LINE_SQUARE_ARROW:
			{
				if(pObj->ISA(SdrPathObj))
				{
					sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2);

					::basegfx::B2DPolygon aB2DPolygon;
					aB2DPolygon.append(::basegfx::B2DPoint(aStart.X(), nYMiddle));
					aB2DPolygon.append(::basegfx::B2DPoint(aEnd.X(), nYMiddle));
					((SdrPathObj*)pObj)->SetPathPoly(::basegfx::B2DPolyPolygon(aB2DPolygon));
				}
				else
				{
					DBG_ERROR("Object is NO line object");
				}

				break;
			}

			case SID_DRAW_MEASURELINE:
			{
				if(pObj->ISA(SdrMeasureObj))
				{
					sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2);
					((SdrMeasureObj*)pObj)->SetPoint(Point(aStart.X(), nYMiddle), 0);
					((SdrMeasureObj*)pObj)->SetPoint(Point(aEnd.X(), nYMiddle), 1);
				}
				else
				{
					DBG_ERROR("Object is NO measure object");
				}

				break;
			}

			case SID_TOOL_CONNECTOR:
			case SID_CONNECTOR_ARROW_START:
			case SID_CONNECTOR_ARROW_END:
			case SID_CONNECTOR_ARROWS:
			case SID_CONNECTOR_CIRCLE_START:
			case SID_CONNECTOR_CIRCLE_END:
			case SID_CONNECTOR_CIRCLES:
			case SID_CONNECTOR_LINE:
			case SID_CONNECTOR_LINE_ARROW_START:
			case SID_CONNECTOR_LINE_ARROW_END:
			case SID_CONNECTOR_LINE_ARROWS:
			case SID_CONNECTOR_LINE_CIRCLE_START:
			case SID_CONNECTOR_LINE_CIRCLE_END:
			case SID_CONNECTOR_LINE_CIRCLES:
			case SID_CONNECTOR_CURVE:
			case SID_CONNECTOR_CURVE_ARROW_START:
			case SID_CONNECTOR_CURVE_ARROW_END:
			case SID_CONNECTOR_CURVE_ARROWS:
			case SID_CONNECTOR_CURVE_CIRCLE_START:
			case SID_CONNECTOR_CURVE_CIRCLE_END:
			case SID_CONNECTOR_CURVE_CIRCLES:
			case SID_CONNECTOR_LINES:
			case SID_CONNECTOR_LINES_ARROW_START:
			case SID_CONNECTOR_LINES_ARROW_END:
			case SID_CONNECTOR_LINES_ARROWS:
			case SID_CONNECTOR_LINES_CIRCLE_START:
			case SID_CONNECTOR_LINES_CIRCLE_END:
			case SID_CONNECTOR_LINES_CIRCLES:
			{
				if(pObj->ISA(SdrEdgeObj))
				{
					((SdrEdgeObj*)pObj)->SetTailPoint(sal_False, aStart);
					((SdrEdgeObj*)pObj)->SetTailPoint(sal_True, aEnd);
				}
				else
				{
					DBG_ERROR("Object is NO connector object");
				}

				break;
			}
			case SID_DRAW_CAPTION:
			case SID_DRAW_CAPTION_VERTICAL:
			{
				if(pObj->ISA(SdrCaptionObj))
				{
					sal_Bool bIsVertical(SID_DRAW_CAPTION_VERTICAL == nID);

					((SdrTextObj*)pObj)->SetVerticalWriting(bIsVertical);

					if(bIsVertical)
					{
						SfxItemSet aSet(pObj->GetMergedItemSet());
						aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER));
						aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT));
						pObj->SetMergedItemSet(aSet);
					}

                    // For task #105815# the default text is not inserted anymore.
                    //	String aText(SdResId(STR_POOLSHEET_TEXT));
                    //	((SdrCaptionObj*)pObj)->SetText(aText);

					((SdrCaptionObj*)pObj)->SetLogicRect(aRect);
					((SdrCaptionObj*)pObj)->SetTailPos(
						aRect.TopLeft() - Point(aRect.GetWidth() / 2, aRect.GetHeight() / 2));
				}
				else
				{
					DBG_ERROR("Object is NO caption object");
				}

				break;
			}

			default:
			{
				pObj->SetLogicRect(aRect);

				break;
			}
		}

		SfxItemSet aAttr(mpDoc->GetPool());
		SetStyleSheet(aAttr, pObj);
		SetAttributes(aAttr, pObj);
		SetLineEnds(aAttr, pObj);
		pObj->SetMergedItemSet(aAttr);
	}

	return pObj;
}

} // end of namespace sd