AOO410/main/sc/source/ui/app/scmod.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sc.hxx"
#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp>
#include <comphelper/processfactory.hxx>





// INCLUDE ---------------------------------------------------------------

#include "scitems.hxx"
#include <sfx2/app.hxx>
#include <editeng/eeitem.hxx>

#include <editeng/flditem.hxx>
#include <editeng/outliner.hxx>
#include <basic/sbstar.hxx>

#include <sfx2/sfxdlg.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/objface.hxx>

#include <svx/hyprlink.hxx>
#include "IAnyRefDialog.hxx"

#include <svtools/ehdl.hxx>
#include <svtools/accessibilityoptions.hxx>
#include <svl/ctloptions.hxx>
#include <unotools/useroptions.hxx>
#include <vcl/status.hxx>
#include <sfx2/bindings.hxx>
#include <sfx2/request.hxx>
#include <sfx2/printer.hxx>
#include <editeng/langitem.hxx>
#include <svtools/colorcfg.hxx>

#include <svl/whiter.hxx>
#include <svx/selctrl.hxx>
#include <svx/insctrl.hxx>
#include <svx/zoomctrl.hxx>
#include <svx/modctrl.hxx>
#include <svx/pszctrl.hxx>
#include <svx/zoomsliderctrl.hxx>
#include <vcl/msgbox.hxx>
#include <svl/inethist.hxx>
#include <vcl/waitobj.hxx>
#include <svx/svxerr.hxx>



#include "scmod.hxx"
#include "global.hxx"
#include "viewopti.hxx"
#include "docoptio.hxx"
#include "appoptio.hxx"
#include "inputopt.hxx"
#include "printopt.hxx"
#include "navicfg.hxx"
#include "addincfg.hxx"
#include "tabvwsh.hxx"
#include "prevwsh.hxx"
#include "docsh.hxx"
#include "drwlayer.hxx"
#include "uiitems.hxx"
#include "sc.hrc"
#include "cfgids.hxx"
#include "inputhdl.hxx"
#include "inputwin.hxx"
#include "msgpool.hxx"
#include "scresid.hxx"
#include "anyrefdg.hxx"
#include "dwfunctr.hxx"
#include "formdata.hxx"
//CHINA001 #include "tpview.hxx"
//CHINA001 #include "tpusrlst.hxx"
//CHINA001 #include "tpcalc.hxx"
#include "tpprint.hxx"
//CHINA001 #include "opredlin.hxx"
#include "transobj.hxx"
#include "detfunc.hxx"
#include "preview.hxx"

#include <svx/xmlsecctrl.hxx>


#define ScModule
#include "scslots.hxx"

#include "scabstdlg.hxx" //CHINA001

#define SC_IDLE_MIN		150
#define SC_IDLE_MAX		3000
#define SC_IDLE_STEP	75
#define SC_IDLE_COUNT	50

static sal_uInt16 nIdleCount = 0;

//------------------------------------------------------------------

SFX_IMPL_INTERFACE( ScModule, SfxShell, ScResId(RID_APPTITLE) )
{
	SFX_OBJECTBAR_REGISTRATION( SFX_OBJECTBAR_APPLICATION | SFX_VISIBILITY_DESKTOP | SFX_VISIBILITY_STANDARD | SFX_VISIBILITY_CLIENT | SFX_VISIBILITY_VIEWER,
								ScResId(RID_OBJECTBAR_APP) );
	SFX_STATUSBAR_REGISTRATION( ScResId(SCCFG_STATUSBAR) );		// nur ID wichtig
	SFX_CHILDWINDOW_REGISTRATION( SvxHyperlinkDlgWrapper::GetChildWindowId() );
}

//------------------------------------------------------------------

ScModule::ScModule( SfxObjectFactory* pFact ) :
	SfxModule( SfxApplication::CreateResManager( "sc" ), sal_False, pFact, NULL ),
	pSelTransfer( NULL ),
	pMessagePool( NULL ),
	pRefInputHandler( NULL ),
	pViewCfg( NULL ),
	pDocCfg( NULL ),
	pAppCfg( NULL ),
	pInputCfg( NULL ),
	pPrintCfg( NULL ),
	pNavipiCfg( NULL ),
    pAddInCfg( NULL ),
	pColorConfig( NULL ),
	pAccessOptions( NULL ),
	pCTLOptions( NULL ),
    pUserOptions( NULL ),
	pErrorHdl( NULL ),
	pSvxErrorHdl( NULL ),
	pFormEditData( NULL ),
	nCurRefDlgId( 0 ),
	bIsWaterCan( sal_False ),
	bIsInEditCommand( sal_False ),
    bIsInExecuteDrop( sal_False ),
    mbIsInSharedDocLoading( false ),
    mbIsInSharedDocSaving( false )
{
	//	im ctor ist der ResManager (DLL-Daten) noch nicht initialisiert!

	SetName(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("StarCalc")));		// fuer Basic

	ResetDragObject();
	SetClipObject( NULL, NULL );

	//	InputHandler braucht nicht mehr angelegt zu werden

	//	ErrorHandler anlegen - war in Init()
	//	zwischen OfficeApplication::Init und ScGlobal::Init
	SvxErrorHandler::Get();
	pErrorHdl	 = new SfxErrorHandler( RID_ERRHDLSC,
										ERRCODE_AREA_SC,
										ERRCODE_AREA_APP2-1,
										GetResMgr() );

	aSpellTimer.SetTimeout(10);
	aSpellTimer.SetTimeoutHdl( LINK( this, ScModule, SpellTimerHdl ) );
	aIdleTimer.SetTimeout(SC_IDLE_MIN);
	aIdleTimer.SetTimeoutHdl( LINK( this, ScModule, IdleHandler ) );
	aIdleTimer.Start();

	pMessagePool = new ScMessagePool;
	pMessagePool->FreezeIdRanges();
	SetPool( pMessagePool );
	ScGlobal::InitTextHeight( pMessagePool );

	StartListening( *SFX_APP() );		// for SFX_HINT_DEINITIALIZING
}

ScModule::~ScModule()
{
	DBG_ASSERT( !pSelTransfer, "Selection Transfer object not deleted" );

	//	InputHandler braucht nicht mehr geloescht zu werden (gibt keinen an der App mehr)

	SfxItemPool::Free(pMessagePool);

	DELETEZ( pFormEditData );

	delete pErrorHdl;
//	delete pSvxErrorHdl;

	ScGlobal::Clear();		// ruft auch ScDocumentPool::DeleteVersionMaps();

	DeleteCfg();			// wurde mal aus Exit() gerufen
}

//------------------------------------------------------------------
void ScModule::ConfigurationChanged( utl::ConfigurationBroadcaster* p, sal_uInt32 )
{
	if ( p == pColorConfig || p == pAccessOptions )
	{
		//	Test if detective objects have to be updated with new colors
		//	(if the detective colors haven't been used yet, there's nothing to update)
		if ( ScDetectiveFunc::IsColorsInitialized() )
		{
            const svtools::ColorConfig& rColors = GetColorConfig();
			sal_Bool bArrows =
                ( ScDetectiveFunc::GetArrowColor() != (ColorData)rColors.GetColorValue(svtools::CALCDETECTIVE).nColor ||
                  ScDetectiveFunc::GetErrorColor() != (ColorData)rColors.GetColorValue(svtools::CALCDETECTIVEERROR).nColor );
			sal_Bool bComments =
                ( ScDetectiveFunc::GetCommentColor() != (ColorData)rColors.GetColorValue(svtools::CALCNOTESBACKGROUND).nColor );
			if ( bArrows || bComments )
			{
				ScDetectiveFunc::InitializeColors();		// get the new colors

				//	update detective objects in all open documents
				SfxObjectShell*	pObjSh = SfxObjectShell::GetFirst();
				while ( pObjSh )
				{
					if ( pObjSh->Type() == TYPE(ScDocShell) )
					{
						ScDocShell* pDocSh = ((ScDocShell*)pObjSh);
						if ( bArrows )
                            ScDetectiveFunc( pDocSh->GetDocument(), 0 ).UpdateAllArrowColors();
						if ( bComments )
                            ScDetectiveFunc::UpdateAllComments( *pDocSh->GetDocument() );
					}
					pObjSh = SfxObjectShell::GetNext( *pObjSh );
				}
			}
		}

		//	force all views to repaint, using the new options

        SfxViewShell* pViewShell = SfxViewShell::GetFirst();
        while(pViewShell)
        {
        	if ( pViewShell->ISA(ScTabViewShell) )
        	{
        		ScTabViewShell* pViewSh = (ScTabViewShell*)pViewShell;
				pViewSh->PaintGrid();
				pViewSh->PaintTop();
				pViewSh->PaintLeft();
				pViewSh->PaintExtras();

				ScInputHandler* pHdl = pViewSh->GetInputHandler();
				if ( pHdl )
					pHdl->ForgetLastPattern();	// EditEngine BackgroundColor may change
        	}
        	else if ( pViewShell->ISA(ScPreviewShell) )
        	{
        		Window* pWin = pViewShell->GetWindow();
        		if (pWin)
        			pWin->Invalidate();
        	}
            pViewShell = SfxViewShell::GetNext( *pViewShell );
        }
	}
    else if ( p == pCTLOptions )
    {
		//	for all documents: set digit language for printer, recalc output factor, update row heights
		SfxObjectShell*	pObjSh = SfxObjectShell::GetFirst();
		while ( pObjSh )
		{
			if ( pObjSh->Type() == TYPE(ScDocShell) )
			{
				ScDocShell* pDocSh = ((ScDocShell*)pObjSh);
				OutputDevice* pPrinter = pDocSh->GetPrinter();
				if ( pPrinter )
					pPrinter->SetDigitLanguage( GetOptDigitLanguage() );

				pDocSh->CalcOutputFactor();

				SCTAB nTabCount = pDocSh->GetDocument()->GetTableCount();
				for (SCTAB nTab=0; nTab<nTabCount; nTab++)
					pDocSh->AdjustRowHeight( 0, MAXROW, nTab );
			}
			pObjSh = SfxObjectShell::GetNext( *pObjSh );
		}

		//	for all views (table and preview): update digit language
		SfxViewShell* pSh = SfxViewShell::GetFirst();
		while ( pSh )
		{
			if ( pSh->ISA( ScTabViewShell ) )
			{
				ScTabViewShell* pViewSh = (ScTabViewShell*)pSh;

				//	set ref-device for EditEngine (re-evaluates digit settings)
				ScInputHandler* pHdl = GetInputHdl(pViewSh);
				if (pHdl)
					pHdl->UpdateRefDevice();

				pViewSh->DigitLanguageChanged();
				pViewSh->PaintGrid();
			}
			else if ( pSh->ISA( ScPreviewShell ) )
			{
				ScPreviewShell* pPreviewSh = (ScPreviewShell*)pSh;
			    ScPreview* pPreview = pPreviewSh->GetPreview();

		    	pPreview->SetDigitLanguage( GetOptDigitLanguage() );
		    	pPreview->Invalidate();
			}

			pSh = SfxViewShell::GetNext( *pSh );
		}
    }
}

void ScModule::Notify( SfxBroadcaster&, const SfxHint& rHint )
{
	if ( rHint.ISA(SfxSimpleHint) )
	{
        sal_uLong nHintId = ((SfxSimpleHint&)rHint).GetId();
        if ( nHintId == SFX_HINT_DEINITIALIZING )
		{
			//	ConfigItems must be removed before ConfigManager
			DeleteCfg();
		}
	}
}

//------------------------------------------------------------------

void ScModule::DeleteCfg()
{
	DELETEZ( pViewCfg ); // Speichern passiert vor Exit() automatisch
	DELETEZ( pDocCfg );
	DELETEZ( pAppCfg );
	DELETEZ( pInputCfg );
	DELETEZ( pPrintCfg );
	DELETEZ( pNavipiCfg );
    DELETEZ( pAddInCfg );

	if ( pColorConfig )
	{
		pColorConfig->RemoveListener(this);
		DELETEZ( pColorConfig );
	}
	if ( pAccessOptions )
	{
	    pAccessOptions->RemoveListener(this);
		DELETEZ( pAccessOptions );
	}
	if ( pCTLOptions )
	{
	    pCTLOptions->RemoveListener(this);
		DELETEZ( pCTLOptions );
	}
    if( pUserOptions )
    {
        DELETEZ( pUserOptions );
    }
}

//------------------------------------------------------------------
//
//		von der Applikation verschoben:
//
//------------------------------------------------------------------

void ScModule::Execute( SfxRequest& rReq )
{
	SfxViewFrame* pViewFrm = SfxViewFrame::Current();
	SfxBindings* pBindings = pViewFrm ? &pViewFrm->GetBindings() : NULL;

	const SfxItemSet*	pReqArgs	= rReq.GetArgs();
	sal_uInt16				nSlot		= rReq.GetSlot();

	switch ( nSlot )
	{
		case SID_CHOOSE_DESIGN:
			{
				String aMacroName =
					String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("Template.Samples.ShowStyles"));
                SfxApplication::CallAppBasic( aMacroName );
			}
			break;
		case SID_EURO_CONVERTER:
			{
				String aMacroName =
					String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("Euro.ConvertRun.Main"));
				SfxApplication::CallAppBasic( aMacroName );
			}
			break;
		case SID_AUTOSPELL_CHECK:
			{
				sal_Bool bSet;
				const SfxPoolItem* pItem;
				if ( pReqArgs && SFX_ITEM_SET == pReqArgs->GetItemState( nSlot, sal_True, &pItem ) )
					bSet = ((const SfxBoolItem*)pItem)->GetValue();
				else
				{						//	Toggle
					ScDocShell* pDocSh = PTR_CAST(ScDocShell, SfxObjectShell::Current());
					if ( pDocSh )
						bSet = !pDocSh->GetDocument()->GetDocOptions().IsAutoSpell();
					else
						bSet = !GetDocOptions().IsAutoSpell();
				}

				SfxItemSet aSet( GetPool(), SID_AUTOSPELL_CHECK, SID_AUTOSPELL_CHECK );
				aSet.Put( SfxBoolItem( SID_AUTOSPELL_CHECK, bSet ) );
				ModifyOptions( aSet );
				rReq.Done();
			}
			break;

		case SID_ATTR_METRIC:
			{
				const SfxPoolItem* pItem;
				if ( pReqArgs && SFX_ITEM_SET == pReqArgs->GetItemState( nSlot, sal_True, &pItem ) )
				{
					FieldUnit eUnit = (FieldUnit)((const SfxUInt16Item*)pItem)->GetValue();
					switch( eUnit )
					{
						case FUNIT_MM:		// nur die Einheiten, die auch im Dialog stehen
						case FUNIT_CM:
						case FUNIT_INCH:
						case FUNIT_PICA:
						case FUNIT_POINT:
							{
								PutItem( *pItem );
								ScAppOptions aNewOpts( GetAppOptions() );
								aNewOpts.SetAppMetric( eUnit );
								SetAppOptions( aNewOpts );
								rReq.Done();
							}
							break;
                        default:
                        {
                            // added to avoid warnings
                        }
					}
				}
			}
			break;

		case FID_AUTOCOMPLETE:
			{
				ScAppOptions aNewOpts( GetAppOptions() );
				sal_Bool bNew = !aNewOpts.GetAutoComplete();
				aNewOpts.SetAutoComplete( bNew );
				SetAppOptions( aNewOpts );
				ScInputHandler::SetAutoComplete( bNew );
				if (pBindings)
					pBindings->Invalidate( FID_AUTOCOMPLETE );
				rReq.Done();
			}
			break;

		case SID_DETECTIVE_AUTO:
			{
				ScAppOptions aNewOpts( GetAppOptions() );
				sal_Bool bNew = !aNewOpts.GetDetectiveAuto();
                SFX_REQUEST_ARG( rReq, pAuto, SfxBoolItem, SID_DETECTIVE_AUTO, sal_False );
                if ( pAuto )
                    bNew = pAuto->GetValue();

				aNewOpts.SetDetectiveAuto( bNew );
				SetAppOptions( aNewOpts );
				if (pBindings)
					pBindings->Invalidate( SID_DETECTIVE_AUTO );
                rReq.AppendItem( SfxBoolItem( SID_DETECTIVE_AUTO, bNew ) );
				rReq.Done();
			}
			break;

		case SID_PSZ_FUNCTION:
			if (pReqArgs)
			{
				const SfxUInt16Item& rItem = (const SfxUInt16Item&)pReqArgs->Get(SID_PSZ_FUNCTION);
				DBG_ASSERT(rItem.ISA(SfxUInt16Item),"falscher Parameter");

				ScAppOptions aNewOpts( GetAppOptions() );
				aNewOpts.SetStatusFunc( rItem.GetValue() );
				SetAppOptions( aNewOpts );

				if (pBindings)
				{
					pBindings->Invalidate( SID_TABLE_CELL );
					pBindings->Update( SID_TABLE_CELL );			// sofort

					pBindings->Invalidate( SID_PSZ_FUNCTION );
					pBindings->Update( SID_PSZ_FUNCTION );
					// falls Menue gleich wieder aufgeklappt wird
				}
			}
			break;

		case SID_ATTR_LANGUAGE:
		case SID_ATTR_CHAR_CJK_LANGUAGE:
		case SID_ATTR_CHAR_CTL_LANGUAGE:
			{
				const SfxPoolItem* pItem;
				if ( pReqArgs && SFX_ITEM_SET == pReqArgs->GetItemState( GetPool().GetWhich(nSlot), sal_True, &pItem ) )
				{
					ScDocShell* pDocSh = PTR_CAST(ScDocShell, SfxObjectShell::Current());
					ScDocument* pDoc = pDocSh ? pDocSh->GetDocument() : NULL;
					if ( pDoc )
					{
						LanguageType eNewLang = ((SvxLanguageItem*)pItem)->GetLanguage();
						LanguageType eLatin, eCjk, eCtl;
						pDoc->GetLanguage( eLatin, eCjk, eCtl );
						LanguageType eOld = ( nSlot == SID_ATTR_CHAR_CJK_LANGUAGE ) ? eCjk :
											( ( nSlot == SID_ATTR_CHAR_CTL_LANGUAGE ) ? eCtl : eLatin );
						if ( eNewLang != eOld )
						{
							if ( nSlot == SID_ATTR_CHAR_CJK_LANGUAGE )
								eCjk = eNewLang;
							else if ( nSlot == SID_ATTR_CHAR_CTL_LANGUAGE )
								eCtl = eNewLang;
							else
								eLatin = eNewLang;

							pDoc->SetLanguage( eLatin, eCjk, eCtl );

							ScInputHandler* pInputHandler = GetInputHdl();
							if ( pInputHandler )
								pInputHandler->UpdateSpellSettings();	// EditEngine-Flags
							ScTabViewShell* pViewSh = PTR_CAST(ScTabViewShell, SfxViewShell::Current());
							if ( pViewSh )
								pViewSh->UpdateDrawTextOutliner();		// EditEngine-Flags

                            pDocSh->SetDocumentModified();
						}
					}
				}
			}
			break;

		case FID_FOCUS_POSWND:
			{
				ScInputHandler* pHdl = GetInputHdl();
				if (pHdl)
				{
					ScInputWindow* pWin = pHdl->GetInputWindow();
					if (pWin)
						pWin->PosGrabFocus();
				}
				rReq.Done();
			}
			break;

        case SID_OPEN_XML_FILTERSETTINGS:
        {
			try
			{
				com::sun::star::uno::Reference < ::com::sun::star::ui::dialogs::XExecutableDialog > xDialog(::comphelper::getProcessServiceFactory()->createInstance(rtl::OUString::createFromAscii("com.sun.star.comp.ui.XSLTFilterDialog")), com::sun::star::uno::UNO_QUERY);
				if( xDialog.is() )
				{
					xDialog->execute();
				}
			}
			catch( ::com::sun::star::uno::RuntimeException& )
			{
			}
		}
		break;

		default:
			DBG_ERROR( "ScApplication: Unknown Message." );
			break;
	}
}

void ScModule::GetState( SfxItemSet& rSet )
{
	SfxWhichIter aIter(rSet);
	sal_uInt16 nWhich = aIter.FirstWhich();
	while ( nWhich )
	{
		switch ( nWhich )
		{
			case FID_AUTOCOMPLETE:
				rSet.Put( SfxBoolItem( nWhich, GetAppOptions().GetAutoComplete() ) );
				break;
			case SID_DETECTIVE_AUTO:
				rSet.Put( SfxBoolItem( nWhich, GetAppOptions().GetDetectiveAuto() ) );
				break;
			case SID_PSZ_FUNCTION:
				rSet.Put( SfxUInt16Item( nWhich, GetAppOptions().GetStatusFunc() ) );
				break;
			case SID_ATTR_METRIC:
                rSet.Put( SfxUInt16Item( nWhich, sal::static_int_cast<sal_uInt16>(GetAppOptions().GetAppMetric()) ) );
				break;
			case SID_AUTOSPELL_CHECK:
				{
					sal_Bool bAuto;
					ScDocShell* pDocSh = PTR_CAST(ScDocShell, SfxObjectShell::Current());
					if ( pDocSh )
						bAuto = pDocSh->GetDocument()->GetDocOptions().IsAutoSpell();
					else
					{
						sal_uInt16 nDummyLang, nDummyCjk, nDummyCtl;
                        GetSpellSettings( nDummyLang, nDummyCjk, nDummyCtl, bAuto );
					}
					rSet.Put( SfxBoolItem( nWhich, bAuto ) );
				}
				break;
			case SID_ATTR_LANGUAGE:
			case ATTR_CJK_FONT_LANGUAGE:		// WID for SID_ATTR_CHAR_CJK_LANGUAGE
			case ATTR_CTL_FONT_LANGUAGE:		// WID for SID_ATTR_CHAR_CTL_LANGUAGE
				{
					ScDocShell* pDocSh = PTR_CAST(ScDocShell, SfxObjectShell::Current());
					ScDocument* pDoc = pDocSh ? pDocSh->GetDocument() : NULL;
					if ( pDoc )
					{
						LanguageType eLatin, eCjk, eCtl;
						pDoc->GetLanguage( eLatin, eCjk, eCtl );
						LanguageType eLang = ( nWhich == ATTR_CJK_FONT_LANGUAGE ) ? eCjk :
											( ( nWhich == ATTR_CTL_FONT_LANGUAGE ) ? eCtl : eLatin );
						rSet.Put( SvxLanguageItem( eLang, nWhich ) );
					}
				}
				break;

		}
		nWhich = aIter.NextWhich();
	}
}


void ScModule::HideDisabledSlots( SfxItemSet& rSet )
{
    if( SfxViewFrame* pViewFrm = SfxViewFrame::Current() )
    {
        SfxBindings& rBindings = pViewFrm->GetBindings();
        SfxWhichIter aIter( rSet );
        for( sal_uInt16 nWhich = aIter.FirstWhich(); nWhich != 0; nWhich = aIter.NextWhich() )
        {
            ScViewUtil::HideDisabledSlot( rSet, rBindings, nWhich );
            // always disable the slots
            rSet.DisableItem( nWhich );
        }
    }
}


//------------------------------------------------------------------

void ScModule::ResetDragObject()
{
	aDragData.pCellTransfer = NULL;
	aDragData.pDrawTransfer = NULL;

	aDragData.aLinkDoc.Erase();
	aDragData.aLinkTable.Erase();
	aDragData.aLinkArea.Erase();
	aDragData.pJumpLocalDoc = NULL;
	aDragData.aJumpTarget.Erase();
	aDragData.aJumpText.Erase();
}

void ScModule::SetDragObject( ScTransferObj* pCellObj, ScDrawTransferObj* pDrawObj )
{
	ResetDragObject();
	aDragData.pCellTransfer = pCellObj;
	aDragData.pDrawTransfer = pDrawObj;
}

void ScModule::SetDragLink( const String& rDoc, const String& rTab, const String& rArea )
{
	ResetDragObject();

	aDragData.aLinkDoc	 = rDoc;
	aDragData.aLinkTable = rTab;
	aDragData.aLinkArea	 = rArea;
}

void ScModule::SetDragJump( ScDocument* pLocalDoc, const String& rTarget, const String& rText )
{
	ResetDragObject();

	aDragData.pJumpLocalDoc = pLocalDoc;
	aDragData.aJumpTarget = rTarget;
	aDragData.aJumpText = rText;
}

//------------------------------------------------------------------

void ScModule::SetClipObject( ScTransferObj* pCellObj, ScDrawTransferObj* pDrawObj )
{
	DBG_ASSERT( !pCellObj || !pDrawObj, "SetClipObject: not allowed to set both objects" );

	aClipData.pCellClipboard = pCellObj;
	aClipData.pDrawClipboard = pDrawObj;
}

ScDocument* ScModule::GetClipDoc()
{
	//	called from document

	ScTransferObj* pObj = ScTransferObj::GetOwnClipboard( NULL );
	if (pObj)
		return pObj->GetDocument();

	return NULL;
}

//------------------------------------------------------------------

void ScModule::SetSelectionTransfer( ScSelectionTransferObj* pNew )
{
	pSelTransfer = pNew;
}

//------------------------------------------------------------------

void ScModule::InitFormEditData()
{
	pFormEditData = new ScFormEditData;
}

void ScModule::ClearFormEditData()
{
	DELETEZ( pFormEditData );
}

//------------------------------------------------------------------

void ScModule::SetViewOptions( const ScViewOptions& rOpt )
{
	if ( !pViewCfg )
		pViewCfg = new ScViewCfg;

	pViewCfg->SetOptions( rOpt );
}

const ScViewOptions& ScModule::GetViewOptions()
{
	if ( !pViewCfg )
		pViewCfg = new ScViewCfg;

	return *pViewCfg;
}

void ScModule::SetDocOptions( const ScDocOptions& rOpt )
{
	if ( !pDocCfg )
		pDocCfg = new ScDocCfg;

	pDocCfg->SetOptions( rOpt );
}

const ScDocOptions& ScModule::GetDocOptions()
{
	if ( !pDocCfg )
		pDocCfg = new ScDocCfg;

	return *pDocCfg;
}

#ifndef	LRU_MAX
#define LRU_MAX 10
#endif

void ScModule::InsertEntryToLRUList(sal_uInt16 nFIndex)
{
	if(nFIndex != 0)
	{
		const ScAppOptions& rAppOpt = GetAppOptions();
		sal_uInt16 nLRUFuncCount = Min( rAppOpt.GetLRUFuncListCount(), (sal_uInt16)LRU_MAX );
		sal_uInt16*	pLRUListIds = rAppOpt.GetLRUFuncList();

		sal_uInt16	aIdxList[LRU_MAX];
		sal_uInt16	n = 0;
		sal_Bool	bFound = sal_False;

		while ((n < LRU_MAX) && n<nLRUFuncCount)						// alte Liste abklappern
		{
			if (!bFound && (pLRUListIds[n]== nFIndex))
				bFound = sal_True;											// erster! Treffer
			else if (bFound)
				aIdxList[n  ] = pLRUListIds[n];							// hinter Treffer kopieren
			else if ((n+1) < LRU_MAX)
				aIdxList[n+1] = pLRUListIds[n];							// vor Treffer verschieben
			n++;
		}
		if (!bFound && (n < LRU_MAX))									// Eintrag nicht gefunden?
			n++;														//  einen mehr
		aIdxList[0] = nFIndex;											// Current on Top

		ScAppOptions aNewOpts(rAppOpt);									// an App melden
		aNewOpts.SetLRUFuncList(aIdxList, n);
		SetAppOptions(aNewOpts);

		RecentFunctionsChanged();
	}
}

void ScModule::RecentFunctionsChanged()
{
	//	update function list window
	sal_uInt16 nFuncListID = ScFunctionChildWindow::GetChildWindowId();

	//!	notify all views
	SfxViewFrame* pViewFrm = SfxViewFrame::Current();
	if ( pViewFrm && pViewFrm->HasChildWindow(nFuncListID) )
	{
		ScFunctionChildWindow* pWnd =(ScFunctionChildWindow*)pViewFrm->GetChildWindow( nFuncListID );

		ScFunctionDockWin* pFuncList=(ScFunctionDockWin*)pWnd->GetWindow();

		pFuncList->InitLRUList();
	}
}

void ScModule::SetAppOptions( const ScAppOptions& rOpt )
{
	if ( !pAppCfg )
		pAppCfg = new ScAppCfg;

	pAppCfg->SetOptions( rOpt );
}

void global_InitAppOptions()
{
	SC_MOD()->GetAppOptions();
}

const ScAppOptions& ScModule::GetAppOptions()
{
	if ( !pAppCfg )
		pAppCfg = new ScAppCfg;

	return *pAppCfg;
}

void ScModule::SetInputOptions( const ScInputOptions& rOpt )
{
	if ( !pInputCfg )
		pInputCfg = new ScInputCfg;

	pInputCfg->SetOptions( rOpt );
}

const ScInputOptions& ScModule::GetInputOptions()
{
	if ( !pInputCfg )
		pInputCfg = new ScInputCfg;

	return *pInputCfg;
}

void ScModule::SetPrintOptions( const ScPrintOptions& rOpt )
{
	if ( !pPrintCfg )
		pPrintCfg = new ScPrintCfg;

	pPrintCfg->SetOptions( rOpt );
}

const ScPrintOptions& ScModule::GetPrintOptions()
{
	if ( !pPrintCfg )
		pPrintCfg = new ScPrintCfg;

	return *pPrintCfg;
}

ScNavipiCfg& ScModule::GetNavipiCfg()
{
	if ( !pNavipiCfg )
		pNavipiCfg = new ScNavipiCfg;

	return *pNavipiCfg;
}

ScAddInCfg& ScModule::GetAddInCfg()
{
	if ( !pAddInCfg )
		pAddInCfg = new ScAddInCfg;

	return *pAddInCfg;
}

svtools::ColorConfig& ScModule::GetColorConfig()
{
	if ( !pColorConfig )
	{
        pColorConfig = new svtools::ColorConfig;
	    pColorConfig->AddListener(this);
	}

	return *pColorConfig;
}

SvtAccessibilityOptions& ScModule::GetAccessOptions()
{
	if ( !pAccessOptions )
	{
		pAccessOptions = new SvtAccessibilityOptions;
		pAccessOptions->AddListener(this);
	}

	return *pAccessOptions;
}

SvtCTLOptions& ScModule::GetCTLOptions()
{
	if ( !pCTLOptions )
	{
		pCTLOptions = new SvtCTLOptions;
		pCTLOptions->AddListener(this);
	}

	return *pCTLOptions;
}

SvtUserOptions&  ScModule::GetUserOptions()
{
    if( !pUserOptions )
    {
        pUserOptions = new SvtUserOptions;
    }
    return *pUserOptions;
}

sal_uInt16 ScModule::GetOptDigitLanguage()
{
	SvtCTLOptions::TextNumerals eNumerals = GetCTLOptions().GetCTLTextNumerals();
	return ( eNumerals == SvtCTLOptions::NUMERALS_ARABIC ) ? LANGUAGE_ENGLISH_US :
		   ( eNumerals == SvtCTLOptions::NUMERALS_HINDI)   ? LANGUAGE_ARABIC_SAUDI_ARABIA :
															 LANGUAGE_SYSTEM;
}

//------------------------------------------------------------------
//
//							Optionen
//
//------------------------------------------------------------------

//
//		ModifyOptions - Items aus Calc-Options-Dialog
//                      und SID_AUTOSPELL_CHECK
//

#define IS_AVAILABLE(w,item) (SFX_ITEM_SET==rOptSet.GetItemState((w),sal_True,&item))

void ScModule::ModifyOptions( const SfxItemSet& rOptSet )
{
	sal_uInt16 nOldSpellLang, nOldCjkLang, nOldCtlLang;
    sal_Bool bOldAutoSpell;
    GetSpellSettings( nOldSpellLang, nOldCjkLang, nOldCtlLang, bOldAutoSpell );

	if (!pAppCfg)
		GetAppOptions();
	DBG_ASSERT( pAppCfg, "AppOptions not initialised :-(" );

	if (!pInputCfg)
		GetInputOptions();
	DBG_ASSERT( pInputCfg, "InputOptions not initialised :-(" );

	//--------------------------------------------------------------

	SfxViewFrame* pViewFrm = SfxViewFrame::Current();
	SfxBindings* pBindings = pViewFrm ? &pViewFrm->GetBindings() : NULL;

	ScTabViewShell*			pViewSh = PTR_CAST(ScTabViewShell, SfxViewShell::Current());
	ScDocShell*				pDocSh  = PTR_CAST(ScDocShell, SfxObjectShell::Current());
	ScDocument*				pDoc    = pDocSh ? pDocSh->GetDocument() : NULL;
	const SfxPoolItem*		pItem	= NULL;
	sal_Bool					bRepaint			= sal_False;
	sal_Bool					bUpdateMarks		= sal_False;
	sal_Bool					bUpdateRefDev		= sal_False;
	sal_Bool					bCalcAll			= sal_False;
	sal_Bool					bSaveSpellCheck		= sal_False;
	sal_Bool					bSaveAppOptions		= sal_False;
	sal_Bool					bSaveInputOptions	= sal_False;

	//--------------------------------------------------------------------------

    //  SFX_APP()->SetOptions( rOptSet );

	//	Linguistik nicht mehr

	if ( IS_AVAILABLE(SID_ATTR_METRIC,pItem) )
	{
		PutItem( *pItem );
		pAppCfg->SetAppMetric( (FieldUnit)((const SfxUInt16Item*)pItem)->GetValue() );
		bSaveAppOptions = sal_True;
	}

	if ( IS_AVAILABLE(SCITEM_USERLIST,pItem) )
	{
		ScGlobal::SetUserList( ((const ScUserListItem*)pItem)->GetUserList() );
		bSaveAppOptions = sal_True;
	}

    if ( IS_AVAILABLE(SID_SC_OPT_SYNCZOOM,pItem) )
    {
        pAppCfg->SetSynchronizeZoom( static_cast<const SfxBoolItem*>(pItem)->GetValue() );
        bSaveAppOptions = sal_True;
    }

	//============================================
	// ViewOptions
	//============================================

	if ( IS_AVAILABLE(SID_SCVIEWOPTIONS,pItem) )
	{
		const ScViewOptions& rNewOpt = ((const ScTpViewItem*)pItem)->GetViewOptions();

		if ( pViewSh )
		{
			ScViewData*				pViewData = pViewSh->GetViewData();
			const ScViewOptions&	rOldOpt	  = pViewData->GetOptions();

			sal_Bool bAnchorList = ( rOldOpt.GetOption( VOPT_ANCHOR ) !=
								 rNewOpt.GetOption( VOPT_ANCHOR ) );

			if ( rOldOpt != rNewOpt )
			{
				pViewData->SetOptions( rNewOpt );	// veraendert rOldOpt
				pViewData->GetDocument()->SetViewOptions( rNewOpt );
				pDocSh->SetDocumentModified();
				bRepaint = sal_True;
			}
			if ( bAnchorList )
				pViewSh->UpdateAnchorHandles();
		}
		SetViewOptions( rNewOpt );
		if (pBindings)
        {
			pBindings->Invalidate(SID_HELPLINES_MOVE);
			pBindings->Invalidate(SID_SCGRIDSHOW);
        }
	}

	//============================================
	// GridOptions, Auswertung nach ViewOptions,
	// da GridOptions Member der ViewOptions ist!
	//============================================

	if ( IS_AVAILABLE(SID_ATTR_GRID_OPTIONS,pItem) )
	{
		ScGridOptions aNewGridOpt( (const SvxOptionsGrid&)((const SvxGridItem&)*pItem) );

		if ( pViewSh )
		{
			ScViewData*			 pViewData = pViewSh->GetViewData();
			ScViewOptions		 aNewViewOpt( pViewData->GetOptions() );
			const ScGridOptions& rOldGridOpt = aNewViewOpt.GetGridOptions();

			if ( rOldGridOpt != aNewGridOpt )
			{
				aNewViewOpt.SetGridOptions( aNewGridOpt );
				pViewData->SetOptions( aNewViewOpt );
				pViewData->GetDocument()->SetViewOptions( aNewViewOpt );
				pDocSh->SetDocumentModified();
				bRepaint = sal_True;
			}
		}
		ScViewOptions aNewViewOpt ( GetViewOptions() );
		aNewViewOpt.SetGridOptions( aNewGridOpt );
		SetViewOptions( aNewViewOpt );
		if (pBindings)
		{
			pBindings->Invalidate(SID_GRID_VISIBLE);
			pBindings->Invalidate(SID_GRID_USE);
		}
	}


	//============================================
	// DocOptions
	//============================================

	if ( IS_AVAILABLE(SID_SCDOCOPTIONS,pItem) )
	{
		const ScDocOptions&	rNewOpt	= ((const ScTpCalcItem*)pItem)->GetDocOptions();

		if ( pDoc )
		{
			const ScDocOptions& rOldOpt = pDoc->GetDocOptions();

			bRepaint = ( bRepaint || ( rOldOpt != rNewOpt )   );
			bCalcAll =   bRepaint &&
						 (  rOldOpt.IsIter()       != rNewOpt.IsIter()
						 || rOldOpt.GetIterCount() != rNewOpt.GetIterCount()
						 || rOldOpt.GetIterEps()   != rNewOpt.GetIterEps()
						 || rOldOpt.IsIgnoreCase() != rNewOpt.IsIgnoreCase()
						 || rOldOpt.IsCalcAsShown() != rNewOpt.IsCalcAsShown()
						 || (rNewOpt.IsCalcAsShown() &&
							rOldOpt.GetStdPrecision() != rNewOpt.GetStdPrecision())
						 || rOldOpt.IsMatchWholeCell() != rNewOpt.IsMatchWholeCell()
						 || rOldOpt.GetYear2000()	!= rNewOpt.GetYear2000()
                         || rOldOpt.IsFormulaRegexEnabled() != rNewOpt.IsFormulaRegexEnabled()
						 );
			pDoc->SetDocOptions( rNewOpt );
			pDocSh->SetDocumentModified();
		}
		SetDocOptions( rNewOpt );
	}

	// nach den eigentlichen DocOptions auch noch die TabDistance setzen
	if ( IS_AVAILABLE(SID_ATTR_DEFTABSTOP,pItem) )
	{
		sal_uInt16 nTabDist = ((SfxUInt16Item*)pItem)->GetValue();
		ScDocOptions aOpt(GetDocOptions());
		aOpt.SetTabDistance(nTabDist);
		SetDocOptions( aOpt );

		if ( pDoc )
		{
            ScDocOptions aDocOpt(pDoc->GetDocOptions());
            aDocOpt.SetTabDistance(nTabDist);
            pDoc->SetDocOptions( aDocOpt );
			pDocSh->SetDocumentModified();
			if(pDoc->GetDrawLayer())
				pDoc->GetDrawLayer()->SetDefaultTabulator(nTabDist);
		}
	}

	//	AutoSpell nach den Doc-Options (weil Member)

	if ( IS_AVAILABLE(SID_AUTOSPELL_CHECK,pItem) )				// an Doc-Options
	{
		sal_Bool bDoAutoSpell = ((const SfxBoolItem*)pItem)->GetValue();

		if (pDoc)
		{
			ScDocOptions aNewOpt = pDoc->GetDocOptions();
			if ( aNewOpt.IsAutoSpell() != bDoAutoSpell )
			{
				aNewOpt.SetAutoSpell( bDoAutoSpell );
				pDoc->SetDocOptions( aNewOpt );

				if (bDoAutoSpell)
					pDoc->SetOnlineSpellPos( ScAddress(0,0,0) );	// vorne anfangen
				else
				{
					WaitObject aWait( pDocSh->GetActiveDialogParent() );
					pDoc->RemoveAutoSpellObj();		//	Edit-Text-Objekte wieder zurueckwandeln
				}

                //#92038#; don't set document modified, because this flag is no longer saved
//				pDocSh->SetDocumentModified();

				bRepaint = sal_True;			//	weil HideAutoSpell evtl. ungueltig
											//!	alle Views painten ???
			}
		}

		if ( bOldAutoSpell != bDoAutoSpell )
		{
			SetAutoSpellProperty( bDoAutoSpell );
			bSaveSpellCheck = sal_True;
		}
		if ( pDocSh )
			pDocSh->PostPaintGridAll();						// wegen Markierungen
		ScInputHandler* pInputHandler = GetInputHdl();
		if ( pInputHandler )
			pInputHandler->UpdateSpellSettings();			// EditEngine-Flags
		if ( pViewSh )
			pViewSh->UpdateDrawTextOutliner();				// EditEngine-Flags

		if (pBindings)
			pBindings->Invalidate( SID_AUTOSPELL_CHECK );
	}

	//============================================
	// InputOptions
	//============================================

	if ( IS_AVAILABLE(SID_SC_INPUT_SELECTIONPOS,pItem) )
	{
		pInputCfg->SetMoveDir( ((const SfxUInt16Item*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_SELECTION,pItem) )
	{
		pInputCfg->SetMoveSelection( ((const SfxBoolItem*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_EDITMODE,pItem) )
	{
		pInputCfg->SetEnterEdit( ((const SfxBoolItem*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_FMT_EXPAND,pItem) )
	{
		pInputCfg->SetExtendFormat( ((const SfxBoolItem*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_RANGEFINDER,pItem) )
	{
		pInputCfg->SetRangeFinder( ((const SfxBoolItem*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_REF_EXPAND,pItem) )
	{
		pInputCfg->SetExpandRefs( ((const SfxBoolItem*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_MARK_HEADER,pItem) )
	{
		pInputCfg->SetMarkHeader( ((const SfxBoolItem*)pItem)->GetValue() );
		bSaveInputOptions = sal_True;
		bUpdateMarks = sal_True;
	}
	if ( IS_AVAILABLE(SID_SC_INPUT_TEXTWYSIWYG,pItem) )
	{
		sal_Bool bNew = ((const SfxBoolItem*)pItem)->GetValue();
		if ( bNew != pInputCfg->GetTextWysiwyg() )
		{
			pInputCfg->SetTextWysiwyg( bNew );
			bSaveInputOptions = sal_True;
			bUpdateRefDev = sal_True;
		}
	}
    if( IS_AVAILABLE( SID_SC_INPUT_REPLCELLSWARN, pItem ) )
	{
        pInputCfg->SetReplaceCellsWarn( ((const SfxBoolItem*)pItem)->GetValue() );
        bSaveInputOptions = sal_True;
	}

	//============================================
	// PrintOptions
	//============================================

	if ( IS_AVAILABLE(SID_SCPRINTOPTIONS,pItem) )
	{
		const ScPrintOptions& rNewOpt = ((const ScTpPrintItem*)pItem)->GetPrintOptions();
		SetPrintOptions( rNewOpt );

		//	broadcast causes all previews to recalc page numbers
		SFX_APP()->Broadcast( SfxSimpleHint( SID_SCPRINTOPTIONS ) );
	}

	//----------------------------------------------------------

//	if ( bSaveSpellCheck )
//	{
		//	currently LinguProperties are saved only at program exit.
		//	if a save method becomes available, it should be called here.
//	}

	if ( bSaveAppOptions )
		pAppCfg->OptionsChanged();

	if ( bSaveInputOptions )
		pInputCfg->OptionsChanged();

	// Neuberechnung anstossen?

	if ( pDoc && bCalcAll )
	{
		WaitObject aWait( pDocSh->GetActiveDialogParent() );
		pDoc->CalcAll();
        if ( pViewSh )
            pViewSh->UpdateCharts( sal_True );
        else
            ScDBFunc::DoUpdateCharts( ScAddress(), pDoc, sal_True );
		if (pBindings)
			pBindings->Invalidate( SID_ATTR_SIZE ); //SvxPosSize-StatusControl-Update
	}

	if ( pViewSh && bUpdateMarks )
		pViewSh->UpdateAutoFillMark();

	// View neuzeichnen?

	if ( pViewSh && bRepaint )
	{
		pViewSh->UpdateFixPos();
		pViewSh->PaintGrid();
		pViewSh->PaintTop();
		pViewSh->PaintLeft();
		pViewSh->PaintExtras();
		pViewSh->InvalidateBorder();
		if (pBindings)
		{
			pBindings->Invalidate( FID_TOGGLEHEADERS ); // -> Checks im Menue
			pBindings->Invalidate( FID_TOGGLESYNTAX );
		}
	}

	// update ref device (for all documents)

	if ( bUpdateRefDev )
	{
		//	for all documents: recalc output factor, update row heights
		SfxObjectShell*	pObjSh = SfxObjectShell::GetFirst();
		while ( pObjSh )
		{
			if ( pObjSh->Type() == TYPE(ScDocShell) )
			{
                ScDocShell* pOneDocSh = ((ScDocShell*)pObjSh);
                pOneDocSh->CalcOutputFactor();
                SCTAB nTabCount = pOneDocSh->GetDocument()->GetTableCount();
				for (SCTAB nTab=0; nTab<nTabCount; nTab++)
                    pOneDocSh->AdjustRowHeight( 0, MAXROW, nTab );
			}
			pObjSh = SfxObjectShell::GetNext( *pObjSh );
		}

		//	for all (tab-) views:
		TypeId aScType = TYPE(ScTabViewShell);
		SfxViewShell* pSh = SfxViewShell::GetFirst( &aScType );
		while ( pSh )
		{
            ScTabViewShell* pOneViewSh = (ScTabViewShell*)pSh;

			//	set ref-device for EditEngine
            ScInputHandler* pHdl = GetInputHdl(pOneViewSh);
			if (pHdl)
				pHdl->UpdateRefDevice();

			//	update view scale
            ScViewData* pViewData = pOneViewSh->GetViewData();
            pOneViewSh->SetZoom( pViewData->GetZoomX(), pViewData->GetZoomY(), sal_False );

			//	repaint
            pOneViewSh->PaintGrid();
            pOneViewSh->PaintTop();
            pOneViewSh->PaintLeft();

			pSh = SfxViewShell::GetNext( *pSh, &aScType );
		}
	}
}

#undef IS_AVAILABLE

//------------------------------------------------------------------
//
//						Input-Handler
//
//------------------------------------------------------------------

ScInputHandler* ScModule::GetInputHdl( ScTabViewShell* pViewSh, sal_Bool bUseRef )
{
	if ( pRefInputHandler && bUseRef )
		return pRefInputHandler;

	ScInputHandler* pHdl = NULL;
	if ( !pViewSh )
    {
        // in case a UIActive embedded object has no ViewShell ( UNO component )
        // the own calc view shell will be set as current, but no handling should happen

		ScTabViewShell* pCurViewSh = PTR_CAST( ScTabViewShell, SfxViewShell::Current() );
        if ( pCurViewSh && !pCurViewSh->GetUIActiveClient() )
            pViewSh = pCurViewSh;
    }

	if ( pViewSh )
		pHdl = pViewSh->GetInputHandler();		// Viewshell hat jetzt immer einen

	//	#57989# wenn keine ViewShell uebergeben oder aktiv, kann NULL herauskommen
	DBG_ASSERT( pHdl || !pViewSh, "GetInputHdl: kein InputHandler gefunden" );
	return pHdl;
}

void ScModule::ViewShellChanged()
{
	ScInputHandler* pHdl   = GetInputHdl();
	ScTabViewShell* pShell = ScTabViewShell::GetActiveViewShell();
	if ( pShell && pHdl )
		pShell->UpdateInputHandler();
}

void ScModule::SetInputMode( ScInputMode eMode )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->SetMode( eMode );
}

sal_Bool ScModule::IsEditMode()
{
	ScInputHandler* pHdl = GetInputHdl();
	return pHdl && pHdl->IsEditMode();
}

sal_Bool ScModule::IsInputMode()
{
	ScInputHandler* pHdl = GetInputHdl();
	return pHdl && pHdl->IsInputMode();
}

sal_Bool ScModule::InputKeyEvent( const KeyEvent& rKEvt, sal_Bool bStartEdit )
{
	ScInputHandler* pHdl = GetInputHdl();
	return ( pHdl ? pHdl->KeyInput( rKEvt, bStartEdit ) : sal_False );
}

void ScModule::InputEnterHandler( sal_uInt8 nBlockMode )
{
	if ( !SFX_APP()->IsDowning() )									// nicht beim Programmende
	{
		ScInputHandler* pHdl = GetInputHdl();
		if (pHdl)
			pHdl->EnterHandler( nBlockMode );
	}
}

void ScModule::InputCancelHandler()
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->CancelHandler();
}

void ScModule::InputSelection( EditView* pView )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->InputSelection( pView );
}

void ScModule::InputChanged( EditView* pView )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->InputChanged( pView );
}

void ScModule::ViewShellGone( ScTabViewShell* pViewSh )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->ViewShellGone( pViewSh );
}

void ScModule::SetRefInputHdl( ScInputHandler* pNew )
{
	pRefInputHandler = pNew;
}

ScInputHandler* ScModule::GetRefInputHdl()
{
	return pRefInputHandler;
}

//------------------------------------------------------------------------
//	Olk's Krempel:

void ScModule::InputGetSelection( xub_StrLen& rStart, xub_StrLen& rEnd )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->InputGetSelection( rStart, rEnd );
}

void ScModule::InputSetSelection( xub_StrLen nStart, xub_StrLen nEnd )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->InputSetSelection( nStart, nEnd );
}

void ScModule::InputReplaceSelection( const String& rStr )
{
	ScInputHandler* pHdl = GetInputHdl();
	if (pHdl)
		pHdl->InputReplaceSelection( rStr );
}

String ScModule::InputGetFormulaStr()
{
	ScInputHandler* pHdl = GetInputHdl();
	String aStr;
	if ( pHdl )
		aStr = pHdl->InputGetFormulaStr();
	return aStr;
}

void ScModule::ActivateInputWindow( const String* pStrFormula, sal_Bool bMatrix )
{
	ScInputHandler* pHdl = GetInputHdl();
	if ( pHdl )
	{
		ScInputWindow* pWin = pHdl->GetInputWindow();
		if ( pStrFormula )
		{
			// Formel uebernehmen
			if ( pWin )
			{
				pWin->SetFuncString( *pStrFormula, sal_False );
				// SetSumAssignMode wegen sal_False nicht noetig
			}
			sal_uInt8 nMode = bMatrix ? SC_ENTER_MATRIX : SC_ENTER_NORMAL;
			pHdl->EnterHandler( nMode );

			//	ohne Invalidate bleibt die Selektion stehen, wenn die Formel unveraendert ist
			if (pWin)
				pWin->TextInvalidate();
		}
		else
		{
			// Abbrechen
			if ( pWin )
			{
				pWin->SetFuncString( EMPTY_STRING, sal_False );
				// SetSumAssignMode wegen sal_False nicht noetig
			}
			pHdl->CancelHandler();
		}
	}
}

//------------------------------------------------------------------
//
//					Referenz - Dialoge
//
//------------------------------------------------------------------

void ScModule::SetRefDialog( sal_uInt16 nId, sal_Bool bVis, SfxViewFrame* pViewFrm )
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	if(nCurRefDlgId==0 || (nId==nCurRefDlgId && !bVis))
	{
		if ( !pViewFrm )
			pViewFrm = SfxViewFrame::Current();

		// #79379# bindings update causes problems with update of stylist if
		// current style family has changed
		//if ( pViewFrm )
		//	pViewFrm->GetBindings().Update();		// to avoid trouble in LockDispatcher

		nCurRefDlgId = bVis ? nId : 0 ;				// before SetChildWindow

		if ( pViewFrm )
		{
			//	store the dialog id also in the view shell
			SfxViewShell* pViewSh = pViewFrm->GetViewShell();
			if ( pViewSh && pViewSh->ISA( ScTabViewShell ) )
				((ScTabViewShell*)pViewSh)->SetCurRefDlgId( nCurRefDlgId );
            else
            {
                // no ScTabViewShell - possible for example from a Basic macro
                bVis = sal_False;
                nCurRefDlgId = 0;   // don't set nCurRefDlgId if no dialog is created
            }

			pViewFrm->SetChildWindow( nId, bVis );
		}

		SfxApplication* pSfxApp = SFX_APP();
		pSfxApp->Broadcast( SfxSimpleHint( FID_REFMODECHANGED ) );
	}
}

SfxChildWindow* lcl_GetChildWinFromAnyView( sal_uInt16 nId )
{
	//	first try the current view

	SfxViewFrame* pViewFrm = SfxViewFrame::Current();
    // #i46999# current view frame can be null (for example, when closing help)
    SfxChildWindow* pChildWnd = pViewFrm ? pViewFrm->GetChildWindow( nId ) : NULL;
	if ( pChildWnd )
		return pChildWnd;			// found in the current view

	//	if not found there, get the child window from any open view
	//	it can be open only in one view because nCurRefDlgId is global

	pViewFrm = SfxViewFrame::GetFirst();
	while ( pViewFrm )
	{
		pChildWnd = pViewFrm->GetChildWindow( nId );
		if ( pChildWnd )
			return pChildWnd;		// found in any view

		pViewFrm = SfxViewFrame::GetNext( *pViewFrm );
	}

	return NULL;					// none found
}

sal_Bool ScModule::IsModalMode(SfxObjectShell* pDocSh)
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	sal_Bool bIsModal = sal_False;

	if ( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		if ( pChildWnd )
		{
			IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetWindow());
			bIsModal = pChildWnd->IsVisible() &&
				!( pRefDlg->IsRefInputMode() && pRefDlg->IsDocAllowed(pDocSh) );
		}
		else
		{
			// in 592 and above, the dialog isn't visible in other views
			//	if the dialog is open but can't be accessed, disable input

			bIsModal = sal_True;
		}

		//	pChildWnd kann 0 sein, wenn der Dialog nach dem Umschalten
		//	von einer anderen Shell noch nicht erzeugt wurde (z.B. in GetFocus)
	}
	else if (pDocSh)
	{
		ScInputHandler* pHdl = GetInputHdl();
		if ( pHdl )
			bIsModal = pHdl->IsModalMode(pDocSh);
	}

	return bIsModal;
}

sal_Bool ScModule::IsTableLocked()
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	sal_Bool bLocked = sal_False;

	//	bisher nur bei ScAnyRefDlg

	if ( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		if ( pChildWnd )
			bLocked = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetWindow())->IsTableLocked();
		else
			bLocked = sal_True;		// for other views, see IsModalMode
	}

	return bLocked;
}

sal_Bool ScModule::IsRefDialogOpen()
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	sal_Bool bIsOpen = sal_False;

	if ( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		if ( pChildWnd )
			bIsOpen = pChildWnd->IsVisible();
		else
			bIsOpen = sal_True;		// for other views, see IsModalMode
	}

	return bIsOpen;
}

sal_Bool ScModule::IsFormulaMode()
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	sal_Bool bIsFormula = sal_False;

	if ( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		if ( pChildWnd )
		{
			IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetWindow());
			bIsFormula = pChildWnd->IsVisible() && pRefDlg->IsRefInputMode();
		}
	}
	else
	{
		ScInputHandler* pHdl = GetInputHdl();
		if ( pHdl )
			bIsFormula = pHdl->IsFormulaMode();
	}

	if (bIsInEditCommand)
		bIsFormula = sal_True;

	return bIsFormula;
}

void lcl_MarkedTabs( const ScMarkData& rMark, SCTAB& rStartTab, SCTAB& rEndTab )
{
	if (rMark.GetSelectCount() > 1)
	{
		sal_Bool bFirst = sal_True;
		for (SCTAB i=0; i<=MAXTAB; i++)
			if (rMark.GetTableSelect(i))
			{
				if (bFirst)
					rStartTab = i;
				rEndTab = i;
				bFirst = sal_False;
			}
	}
}

void ScModule::SetReference( const ScRange& rRef, ScDocument* pDoc,
									const ScMarkData* pMarkData )
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	//	in Ref-Dialogen wird hiermit auch das Zoom-In ausgeloest,
	//	wenn Start und Ende der Ref unterschiedlich sind

	ScRange aNew = rRef;
	aNew.Justify();					// immer "richtig herum"

	if( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		DBG_ASSERT( pChildWnd, "NoChildWin" );
		if ( pChildWnd )
		{
			if ( nCurRefDlgId == SID_OPENDLG_CONSOLIDATE && pMarkData )
			{
				SCTAB nStartTab = aNew.aStart.Tab();
				SCTAB nEndTab   = aNew.aEnd.Tab();
				lcl_MarkedTabs( *pMarkData, nStartTab, nEndTab );
				aNew.aStart.SetTab(nStartTab);
				aNew.aEnd.SetTab(nEndTab);
			}

			IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetWindow());

			//	hide the (color) selection now instead of later from LoseFocus,
			//	don't abort the ref input that causes this call (bDoneRefMode = sal_False)
			pRefDlg->HideReference( sal_False );
			pRefDlg->SetReference( aNew, pDoc );
		}
	}
	else
	{
		ScInputHandler* pHdl = GetInputHdl();
		if (pHdl)
			pHdl->SetReference( aNew, pDoc );
		else
		{
			DBG_ERROR("SetReference ohne Empfaenger");
		}
	}
}

void ScModule::AddRefEntry()						// "Mehrfachselektion"
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	if ( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		DBG_ASSERT( pChildWnd, "NoChildWin" );
		if ( pChildWnd )
		{
			IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetWindow());
			pRefDlg->AddRefEntry();
		}
	}
	else
	{
		ScInputHandler* pHdl = GetInputHdl();
		if (pHdl)
			pHdl->AddRefEntry();
	}
}

void ScModule::EndReference()
{
	//!	move reference dialog handling to view
	//!	(only keep function autopilot here for references to other documents)

	//	in Ref-Dialogen wird hiermit auch das Zoom-In wieder aufgehoben

	//!	ShowRefFrame am InputHdl, wenn der Funktions-AP offen ist ???

	if ( nCurRefDlgId )
	{
		SfxChildWindow* pChildWnd = lcl_GetChildWinFromAnyView( nCurRefDlgId );
		DBG_ASSERT( pChildWnd, "NoChildWin" );
		if ( pChildWnd )
		{
			IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetWindow());
			pRefDlg->SetActive();
		}
	}
}

//------------------------------------------------------------------
//
//					Idle / Online-Spelling
//
//------------------------------------------------------------------

void ScModule::AnythingChanged()
{
	sal_uLong nOldTime = aIdleTimer.GetTimeout();
	if ( nOldTime != SC_IDLE_MIN )
		aIdleTimer.SetTimeout( SC_IDLE_MIN );

	nIdleCount = 0;
}

void lcl_CheckNeedsRepaint( ScDocShell* pDocShell )
{
	SfxViewFrame* pFrame = SfxViewFrame::GetFirst( pDocShell );
	while ( pFrame )
	{
		SfxViewShell* p = pFrame->GetViewShell();
		ScTabViewShell* pViewSh = PTR_CAST(ScTabViewShell,p);
		if ( pViewSh )
			pViewSh->CheckNeedsRepaint();
		pFrame = SfxViewFrame::GetNext( *pFrame, pDocShell );
	}
}

IMPL_LINK( ScModule, IdleHandler, Timer*, EMPTYARG )
{
	if ( Application::AnyInput( INPUT_MOUSEANDKEYBOARD ) )
	{
		aIdleTimer.Start();			// Timeout unveraendert
		return 0;
	}

	sal_Bool bMore = sal_False;
	ScDocShell* pDocSh = PTR_CAST( ScDocShell, SfxObjectShell::Current() );
	if ( pDocSh )
	{
		ScDocument* pDoc = pDocSh->GetDocument();

        sal_Bool bLinks = pDoc->IdleCheckLinks();
        sal_Bool bWidth = pDoc->IdleCalcTextWidth();
        sal_Bool bSpell = pDoc->ContinueOnlineSpelling();
        if ( bSpell )
            aSpellTimer.Start();					// da ist noch was

        bMore = bLinks || bWidth || bSpell;			// ueberhaupt noch was?

        //	While calculating a Basic formula, a paint event may have occured,
        //	so check the bNeedsRepaint flags for this document's views
        if (bWidth)
            lcl_CheckNeedsRepaint( pDocSh );
	}

	sal_uLong nOldTime = aIdleTimer.GetTimeout();
	sal_uLong nNewTime = nOldTime;
	if ( bMore )
	{
		nNewTime = SC_IDLE_MIN;
		nIdleCount = 0;
	}
	else
	{
		//	SC_IDLE_COUNT mal mit initialem Timeout, dann hochzaehlen

		if ( nIdleCount < SC_IDLE_COUNT )
			++nIdleCount;
		else
		{
			nNewTime += SC_IDLE_STEP;
			if ( nNewTime > SC_IDLE_MAX )
				nNewTime = SC_IDLE_MAX;
		}
	}
	if ( nNewTime != nOldTime )
		aIdleTimer.SetTimeout( nNewTime );

	aIdleTimer.Start();
	return 0;
}

IMPL_LINK( ScModule, SpellTimerHdl, Timer*, EMPTYARG )
{
	if ( Application::AnyInput( INPUT_KEYBOARD ) )
	{
		aSpellTimer.Start();
		return 0;					// dann spaeter wieder...
	}

	ScDocShell* pDocSh = PTR_CAST( ScDocShell, SfxObjectShell::Current() );
	if ( pDocSh )
	{
		ScDocument* pDoc = pDocSh->GetDocument();
		if ( pDoc->ContinueOnlineSpelling() )
			aSpellTimer.Start();
	}
	return 0;
}

	//virtuelle Methoden fuer den Optionendialog
SfxItemSet*	 ScModule::CreateItemSet( sal_uInt16 nId )
{
	SfxItemSet*	 pRet = 0;
	if(SID_SC_EDITOPTIONS == nId)
	{
		pRet = new SfxItemSet( GetPool(),
							// TP_CALC:
							SID_SCDOCOPTIONS,		SID_SCDOCOPTIONS,
							// TP_VIEW:
							SID_SCVIEWOPTIONS,		SID_SCVIEWOPTIONS,
                            SID_SC_OPT_SYNCZOOM,    SID_SC_OPT_SYNCZOOM,
							// TP_INPUT:
							SID_SC_INPUT_SELECTION,SID_SC_INPUT_MARK_HEADER,
							SID_SC_INPUT_TEXTWYSIWYG,SID_SC_INPUT_TEXTWYSIWYG,
                            SID_SC_INPUT_REPLCELLSWARN,SID_SC_INPUT_REPLCELLSWARN,
							// TP_USERLISTS:
							SCITEM_USERLIST,		SCITEM_USERLIST,
							// TP_PRINT:
							SID_SCPRINTOPTIONS,	SID_SCPRINTOPTIONS,
							// TP_GRID:
							SID_ATTR_GRID_OPTIONS, SID_ATTR_GRID_OPTIONS,
							//
							SID_ATTR_METRIC,		SID_ATTR_METRIC,
							SID_ATTR_DEFTABSTOP,	SID_ATTR_DEFTABSTOP,
							0 );

		ScDocShell* 	pDocSh = PTR_CAST(ScDocShell,
											SfxObjectShell::Current());
		ScDocOptions	aCalcOpt = pDocSh
							? pDocSh->GetDocument()->GetDocOptions()
							: GetDocOptions();

		ScTabViewShell* pViewSh = PTR_CAST(ScTabViewShell,
											SfxViewShell::Current());
		ScViewOptions	aViewOpt = pViewSh
							? pViewSh->GetViewData()->GetOptions()
							: GetViewOptions();

		ScUserListItem	aULItem( SCITEM_USERLIST );
		ScUserList* 	pUL = ScGlobal::GetUserList();

        //  SFX_APP()->GetOptions( aSet );

		pRet->Put( SfxUInt16Item( SID_ATTR_METRIC,
                        sal::static_int_cast<sal_uInt16>(GetAppOptions().GetAppMetric()) ) );

		// TP_CALC
		pRet->Put( SfxUInt16Item( SID_ATTR_DEFTABSTOP,
						aCalcOpt.GetTabDistance()));
		pRet->Put( ScTpCalcItem( SID_SCDOCOPTIONS, aCalcOpt ) );

		// TP_VIEW
		pRet->Put( ScTpViewItem( SID_SCVIEWOPTIONS, aViewOpt ) );
        pRet->Put( SfxBoolItem( SID_SC_OPT_SYNCZOOM, GetAppOptions().GetSynchronizeZoom() ) );

		// TP_INPUT
		const ScInputOptions& rInpOpt = GetInputOptions();
		pRet->Put( SfxUInt16Item( SID_SC_INPUT_SELECTIONPOS,
					rInpOpt.GetMoveDir() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_SELECTION,
					rInpOpt.GetMoveSelection() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_EDITMODE,
					rInpOpt.GetEnterEdit() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_FMT_EXPAND,
					rInpOpt.GetExtendFormat() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_RANGEFINDER,
					rInpOpt.GetRangeFinder() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_REF_EXPAND,
					rInpOpt.GetExpandRefs() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_MARK_HEADER,
					rInpOpt.GetMarkHeader() ) );
		pRet->Put( SfxBoolItem( SID_SC_INPUT_TEXTWYSIWYG,
					rInpOpt.GetTextWysiwyg() ) );
        pRet->Put( SfxBoolItem( SID_SC_INPUT_REPLCELLSWARN,
                    rInpOpt.GetReplaceCellsWarn() ) );

		// RID_SC_TP_PRINT
		pRet->Put( ScTpPrintItem( SID_SCPRINTOPTIONS, GetPrintOptions() ) );

		// TP_GRID
		SvxGridItem* pSvxGridItem = aViewOpt.CreateGridItem();
		pRet->Put( *pSvxGridItem );
		delete pSvxGridItem;

		// TP_USERLISTS
		if ( pUL )
			aULItem.SetUserList( *pUL );
		pRet->Put( aULItem );

	}
	return pRet;
}

void ScModule::ApplyItemSet( sal_uInt16 nId, const SfxItemSet& rSet )
{
	if(SID_SC_EDITOPTIONS == nId)
	{
		ModifyOptions( rSet );
	}
}

SfxTabPage*	 ScModule::CreateTabPage( sal_uInt16 nId, Window* pParent, const SfxItemSet& rSet )
{
	SfxTabPage* pRet = NULL;
	ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
	DBG_ASSERT(pFact, "ScAbstractFactory create fail!");//CHINA001
	switch(nId)
	{
		case SID_SC_TP_LAYOUT:
								{
									//CHINA001 pRet = ScTpLayoutOptions::Create(pParent, rSet);
									::CreateTabPage ScTpLayoutOptionsCreate = pFact->GetTabPageCreatorFunc( RID_SCPAGE_LAYOUT );
									if ( ScTpLayoutOptionsCreate )
										pRet =  (*ScTpLayoutOptionsCreate) (pParent, rSet);
								}
								break;
		case SID_SC_TP_CONTENT:
								{
									//CHINA001 pRet = ScTpContentOptions::Create(pParent, rSet);
									::CreateTabPage ScTpContentOptionsCreate = pFact->GetTabPageCreatorFunc(RID_SCPAGE_CONTENT);
									if ( ScTpContentOptionsCreate )
										pRet = (*ScTpContentOptionsCreate)(pParent, rSet);
								}
								break;
		case SID_SC_TP_GRID: 	 		pRet = SvxGridTabPage::Create(pParent, rSet); break;
		case SID_SC_TP_USERLISTS:
								{
									//CHINA001 pRet = ScTpUserLists::Create(pParent, rSet);
									::CreateTabPage ScTpUserListsCreate = pFact->GetTabPageCreatorFunc( RID_SCPAGE_USERLISTS );
									if ( ScTpUserListsCreate )
											pRet = (*ScTpUserListsCreate)( pParent, rSet);
								}
								break;
		case SID_SC_TP_CALC:
								{	//CHINA001 pRet = ScTpCalcOptions::Create(pParent, rSet);
													::CreateTabPage ScTpCalcOptionsCreate = pFact->GetTabPageCreatorFunc( RID_SCPAGE_CALC );
													if ( ScTpCalcOptionsCreate )
														pRet = (*ScTpCalcOptionsCreate)(pParent, rSet);
								}
								break;
		case SID_SC_TP_CHANGES:
								{			//CHINA001 pRet = ScRedlineOptionsTabPage::Create(pParent, rSet);
											::CreateTabPage ScRedlineOptionsTabPageCreate =	pFact->GetTabPageCreatorFunc( RID_SCPAGE_OPREDLINE );
											if ( ScRedlineOptionsTabPageCreate )
													pRet =(*ScRedlineOptionsTabPageCreate)(pParent, rSet);
								}
						break;
		case RID_SC_TP_PRINT:
								{//CHINA001 pRet = ScTpPrintOptions::Create(pParent, rSet);
									::CreateTabPage ScTpPrintOptionsCreate = 	pFact->GetTabPageCreatorFunc( RID_SCPAGE_PRINT );
									if ( ScTpPrintOptionsCreate )
										pRet = (*ScTpPrintOptionsCreate)( pParent, rSet);
								}
			break;
		case RID_OFA_TP_INTERNATIONAL:
		{
			SfxAbstractDialogFactory* pSfxFact = SfxAbstractDialogFactory::Create();
			if ( pSfxFact )
			{
				::CreateTabPage fnCreatePage = pSfxFact->GetTabPageCreatorFunc( nId );
				if ( fnCreatePage )
					pRet = (*fnCreatePage)( pParent, rSet );
			}
		}
	}

	DBG_ASSERT( pRet, "ScModule::CreateTabPage(): no valid ID for TabPage!" );

	return pRet;
}

//------------------------------------------------------------------

IMPL_LINK( ScModule, CalcFieldValueHdl, EditFieldInfo*, pInfo )
{
	//!	mit ScFieldEditEngine zusammenfassen !!!

	if (pInfo)
	{
		const SvxFieldItem& rField = pInfo->GetField();
		const SvxFieldData* pField = rField.GetField();

		if (pField && pField->ISA(SvxURLField))
		{
			/******************************************************************
			* URL-Field
			******************************************************************/

			const SvxURLField* pURLField = (const SvxURLField*) pField;
			String aURL = pURLField->GetURL();

			switch ( pURLField->GetFormat() )
			{
				case SVXURLFORMAT_APPDEFAULT: //!!! einstellbar an App???
				case SVXURLFORMAT_REPR:
				{
					pInfo->SetRepresentation( pURLField->GetRepresentation() );
				}
				break;

				case SVXURLFORMAT_URL:
				{
					pInfo->SetRepresentation( aURL );
				}
				break;
			}

            svtools::ColorConfigEntry eEntry =
                INetURLHistory::GetOrCreate()->QueryUrl( aURL ) ? svtools::LINKSVISITED : svtools::LINKS;
			pInfo->SetTxtColor( GetColorConfig().GetColorValue(eEntry).nColor );
		}
		else
		{
			DBG_ERROR("unbekannter Feldbefehl");
			pInfo->SetRepresentation(String('?'));
		}
	}

	return 0;
}

sal_Bool ScModule::RegisterRefWindow( sal_uInt16 nSlotId, Window *pWnd )
{
    std::list<Window*> & rlRefWindow = m_mapRefWindow[nSlotId];

    if( std::find( rlRefWindow.begin(), rlRefWindow.end(), pWnd ) == rlRefWindow.end() )
    {
        rlRefWindow.push_back( pWnd );
        return sal_True;
    }

    return sal_False;
}

sal_Bool  ScModule::UnregisterRefWindow( sal_uInt16 nSlotId, Window *pWnd )
{
    std::map<sal_uInt16, std::list<Window*> >::iterator iSlot = m_mapRefWindow.find( nSlotId );

    if( iSlot == m_mapRefWindow.end() )
        return sal_False;

    std::list<Window*> & rlRefWindow = iSlot->second;

    std::list<Window*>::iterator i = std::find( rlRefWindow.begin(), rlRefWindow.end(), pWnd );

    if( i == rlRefWindow.end() )
        return sal_False;

    rlRefWindow.erase( i );

    if( !rlRefWindow.size() )
        m_mapRefWindow.erase( nSlotId );

    return sal_True;
}

sal_Bool  ScModule::IsAliveRefDlg( sal_uInt16 nSlotId, Window *pWnd )
{
    std::map<sal_uInt16, std::list<Window*> >::iterator iSlot = m_mapRefWindow.find( nSlotId );

    if( iSlot == m_mapRefWindow.end() )
        return sal_False;

    std::list<Window*> & rlRefWindow = iSlot->second;

    return rlRefWindow.end() != std::find( rlRefWindow.begin(), rlRefWindow.end(), pWnd );
}

Window *  ScModule::Find1RefWindow( sal_uInt16 nSlotId, Window *pWndAncestor )
{
    if (!pWndAncestor)
        return NULL;

    std::map<sal_uInt16, std::list<Window*> >::iterator iSlot = m_mapRefWindow.find( nSlotId );

    if( iSlot == m_mapRefWindow.end() )
        return NULL;

    std::list<Window*> & rlRefWindow = iSlot->second;

    while( Window *pParent = pWndAncestor->GetParent() ) pWndAncestor = pParent;

    for( std::list<Window*>::iterator i = rlRefWindow.begin(); i!=rlRefWindow.end(); i++ )
        if ( pWndAncestor->IsWindowOrChild( *i, (*i)->IsSystemWindow() ) )
            return *i;

    return NULL;
}

Window *  ScModule::Find1RefWindow( Window *pWndAncestor )
{
    if (!pWndAncestor)
        return NULL;

    while( Window *pParent = pWndAncestor->GetParent() ) pWndAncestor = pParent;

    for( std::map<sal_uInt16, std::list<Window*> >::iterator i = m_mapRefWindow.begin();
        i!=m_mapRefWindow.end(); i++ )
        for( std::list<Window*>::iterator j = i->second.begin(); j!=i->second.end(); j++ )
            if ( pWndAncestor->IsWindowOrChild( *j, (*j)->IsSystemWindow() ) )
                return *j;

    return NULL;
}