| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| #ifndef SC_REFDATA_HXX |
| #define SC_REFDATA_HXX |
| |
| #include "global.hxx" |
| #include "address.hxx" |
| #include "scdllapi.h" |
| |
| |
| // Ref-Flags for old (until release 3.1) documents |
| |
| struct OldSingleRefBools |
| { |
| sal_uInt8 bRelCol; // Flag values (see further down), 2 bits each in file format |
| sal_uInt8 bRelRow; |
| sal_uInt8 bRelTab; |
| sal_uInt8 bOldFlag3D; // two sal_Bool flags (see further down) |
| }; |
| |
| #define SR_ABSOLUTE 0 // Absolute value |
| #define SR_RELABS 1 // Relative value as absolute value (until release 3.1) |
| #define SR_RELATIVE 2 // Relative value as delta value (after release 3.1) |
| #define SR_DELETED 3 // Deleted col/row/tab |
| |
| #define SRF_3D 0x01 // 3D reference, was the sal_Bool (before build 304a) |
| #define SRF_RELNAME 0x02 // Reference derived from RangeName with relative values |
| #define SRF_BITS 0x03 // Mask of possible bits |
| |
| |
| struct SC_DLLPUBLIC ScSingleRefData // Single reference (one address) into the sheet |
| { |
| SCsCOL nCol; // Absolute values |
| SCsROW nRow; |
| SCsTAB nTab; |
| SCsCOL nRelCol; // Values relative to the position |
| SCsROW nRelRow; |
| SCsTAB nRelTab; |
| |
| union |
| { |
| sal_Bool bFlags; |
| struct |
| { |
| sal_Bool bColRel :1; |
| sal_Bool bColDeleted :1; |
| sal_Bool bRowRel :1; |
| sal_Bool bRowDeleted :1; |
| sal_Bool bTabRel :1; |
| sal_Bool bTabDeleted :1; |
| sal_Bool bFlag3D :1; // 3D-Ref |
| sal_Bool bRelName :1; // Reference derived from RangeName with relative values |
| }Flags; |
| }; |
| |
| // No default ctor, because used in ScRawToken union, set InitFlags! |
| inline void InitFlags() { bFlags = 0; } // all FALSE |
| |
| // #123870# Make it possible to init members to some defined values |
| inline void InitMembers() { nCol = nRow = nTab = nRelCol = nRelRow = nRelTab = 0; } |
| |
| // InitAddress: InitFlags and set address |
| inline void InitAddress( const ScAddress& rAdr ); |
| inline void InitAddress( SCCOL nCol, SCROW nRow, SCTAB nTab ); |
| // InitAddressRel: InitFlags and set address, everything relative to rPos |
| inline void InitAddressRel( const ScAddress& rAdr, const ScAddress& rPos ); |
| inline void SetColRel( sal_Bool bVal ) { Flags.bColRel = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsColRel() const { return Flags.bColRel; } |
| inline void SetRowRel( sal_Bool bVal ) { Flags.bRowRel = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsRowRel() const { return Flags.bRowRel; } |
| inline void SetTabRel( sal_Bool bVal ) { Flags.bTabRel = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsTabRel() const { return Flags.bTabRel; } |
| |
| inline void SetColDeleted( sal_Bool bVal ) { Flags.bColDeleted = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsColDeleted() const { return Flags.bColDeleted; } |
| inline void SetRowDeleted( sal_Bool bVal ) { Flags.bRowDeleted = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsRowDeleted() const { return Flags.bRowDeleted; } |
| inline void SetTabDeleted( sal_Bool bVal ) { Flags.bTabDeleted = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsTabDeleted() const { return Flags.bTabDeleted; } |
| inline sal_Bool IsDeleted() const { return IsColDeleted() || IsRowDeleted() || IsTabDeleted(); } |
| |
| inline void SetFlag3D( sal_Bool bVal ) { Flags.bFlag3D = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsFlag3D() const { return Flags.bFlag3D; } |
| inline void SetRelName( sal_Bool bVal ) { Flags.bRelName = (bVal ? sal_True : sal_False ); } |
| inline sal_Bool IsRelName() const { return Flags.bRelName; } |
| |
| inline sal_Bool Valid() const; |
| /// In external references nTab is -1 |
| inline bool ValidExternal() const; |
| |
| void SmartRelAbs( const ScAddress& rPos ); |
| void CalcRelFromAbs( const ScAddress& rPos ); |
| void CalcAbsIfRel( const ScAddress& rPos ); |
| sal_Bool operator==( const ScSingleRefData& ) const; |
| bool operator!=( const ScSingleRefData& ) const; |
| }; |
| |
| inline void ScSingleRefData::InitAddress( SCCOL nColP, SCROW nRowP, SCTAB nTabP ) |
| { |
| InitFlags(); |
| nCol = nColP; |
| nRow = nRowP; |
| nTab = nTabP; |
| } |
| |
| inline void ScSingleRefData::InitAddress( const ScAddress& rAdr ) |
| { |
| InitAddress( rAdr.Col(), rAdr.Row(), rAdr.Tab()); |
| } |
| |
| inline void ScSingleRefData::InitAddressRel( const ScAddress& rAdr, |
| const ScAddress& rPos ) |
| { |
| InitAddress( rAdr.Col(), rAdr.Row(), rAdr.Tab()); |
| SetColRel( sal_True ); |
| SetRowRel( sal_True ); |
| SetTabRel( sal_True ); |
| CalcRelFromAbs( rPos ); |
| } |
| |
| inline sal_Bool ScSingleRefData::Valid() const |
| { |
| return nCol >= 0 && nCol <= MAXCOL && |
| nRow >= 0 && nRow <= MAXROW && |
| nTab >= 0 && nTab <= MAXTAB; |
| } |
| |
| inline bool ScSingleRefData::ValidExternal() const |
| { |
| return nCol >= 0 && nCol <= MAXCOL && |
| nRow >= 0 && nRow <= MAXROW && |
| nTab == -1; |
| } |
| |
| |
| struct ScComplexRefData // Complex reference (a range) into the sheet |
| { |
| ScSingleRefData Ref1; |
| ScSingleRefData Ref2; |
| |
| inline void InitFlags() |
| { Ref1.InitFlags(); Ref2.InitFlags(); } |
| |
| // #123870# Make it possible to init members to some defined values |
| inline void InitMembers() |
| { |
| Ref1.InitMembers(); |
| Ref2.InitMembers(); |
| } |
| |
| inline void InitRange( const ScRange& rRange ) |
| { |
| Ref1.InitAddress( rRange.aStart ); |
| Ref2.InitAddress( rRange.aEnd ); |
| } |
| inline void InitRangeRel( const ScRange& rRange, const ScAddress& rPos ) |
| { |
| Ref1.InitAddressRel( rRange.aStart, rPos ); |
| Ref2.InitAddressRel( rRange.aEnd, rPos ); |
| } |
| inline void InitRange( SCCOL nCol1, SCROW nRow1, SCTAB nTab1, |
| SCCOL nCol2, SCROW nRow2, SCTAB nTab2 ) |
| { |
| Ref1.InitAddress( nCol1, nRow1, nTab1 ); |
| Ref2.InitAddress( nCol2, nRow2, nTab2 ); |
| } |
| inline void SmartRelAbs( const ScAddress& rPos ) |
| { Ref1.SmartRelAbs( rPos ); Ref2.SmartRelAbs( rPos ); } |
| inline void CalcRelFromAbs( const ScAddress& rPos ) |
| { Ref1.CalcRelFromAbs( rPos ); Ref2.CalcRelFromAbs( rPos ); } |
| inline void CalcAbsIfRel( const ScAddress& rPos ) |
| { Ref1.CalcAbsIfRel( rPos ); Ref2.CalcAbsIfRel( rPos ); } |
| inline sal_Bool IsDeleted() const |
| { return Ref1.IsDeleted() || Ref2.IsDeleted(); } |
| inline sal_Bool Valid() const |
| { return Ref1.Valid() && Ref2.Valid(); } |
| /** In external references nTab is -1 for the start tab and -1 for the end |
| tab if one sheet, or >=0 if more than one sheets. */ |
| inline bool ValidExternal() const; |
| |
| /// Absolute references have to be up-to-date when calling this! |
| void PutInOrder(); |
| inline sal_Bool operator==( const ScComplexRefData& r ) const |
| { return Ref1 == r.Ref1 && Ref2 == r.Ref2; } |
| /** Enlarge range if reference passed is not within existing range. |
| ScAddress position is used to calculate absolute references from |
| relative references. */ |
| ScComplexRefData& Extend( const ScSingleRefData & rRef, const ScAddress & rPos ); |
| ScComplexRefData& Extend( const ScComplexRefData & rRef, const ScAddress & rPos ); |
| }; |
| |
| inline bool ScComplexRefData::ValidExternal() const |
| { |
| return Ref1.ValidExternal() && |
| Ref2.nCol >= 0 && Ref2.nCol <= MAXCOL && |
| Ref2.nRow >= 0 && Ref2.nRow <= MAXROW && |
| Ref2.nTab >= Ref1.nTab; |
| } |
| |
| #endif |