AOO410/main/sal/inc/rtl/strbuf.hxx - openoffice - Git at Google

 /**************************************************************
  *
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
  * regarding copyright ownership.  The ASF licenses this file
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
  *
  *   http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
  * software distributed under the License is distributed on an
  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  * KIND, either express or implied.  See the License for the
  * specific language governing permissions and limitations
  * under the License.
  *
  *************************************************************/


 #ifndef _RTL_STRBUF_HXX_
 #define _RTL_STRBUF_HXX_

 #include "osl/diagnose.h"
 #include <rtl/strbuf.h>
 #include <rtl/string.hxx>

 #ifdef __cplusplus

 namespace rtl
 {

 /** @HTML

     A string buffer implements a mutable sequence of characters.
     <p>
     String buffers are safe for use by multiple threads. The methods
     are synchronized where necessary so that all the operations on any
     particular instance behave as if they occur in some serial order.
     <p>
     String buffers are used by the compiler to implement the binary
     string concatenation operator <code>+</code>. For example, the code:
     <p><blockquote><pre>
         x = "a" + 4 + "c"
     </pre></blockquote><p>
     is compiled to the equivalent of:
     <p><blockquote><pre>
         x = new OStringBuffer().append("a").append(4).append("c")
                               .toString()
     </pre></blockquote><p>
     The principal operations on a <code>OStringBuffer</code> are the
     <code>append</code> and <code>insert</code> methods, which are
     overloaded so as to accept data of any type. Each effectively
     converts a given datum to a string and then appends or inserts the
     characters of that string to the string buffer. The
     <code>append</code> method always adds these characters at the end
     of the buffer; the <code>insert</code> method adds the characters at
     a specified point.
     <p>
     For example, if <code>z</code> refers to a string buffer object
     whose current contents are "<code>start</code>", then
     the method call <code>z.append("le")</code> would cause the string
     buffer to contain "<code>startle</code>", whereas
     <code>z.insert(4, "le")</code> would alter the string buffer to
     contain "<code>starlet</code>".
     <p>
     Every string buffer has a capacity. As long as the length of the
     character sequence contained in the string buffer does not exceed
     the capacity, it is not necessary to allocate a new internal
     buffer array. If the internal buffer overflows, it is
     automatically made larger.
  */
 class OStringBuffer
 {
 public:
     /**
         Constructs a string buffer with no characters in it and an
         initial capacity of 16 characters.
      */
     OStringBuffer()
         : pData(NULL)
         , nCapacity( 16 )
     {
         rtl_string_new_WithLength( &pData, nCapacity );
     }

     /**
         Allocates a new string buffer that contains the same sequence of
         characters as the string buffer argument.

         @param   value   a <code>OStringBuffer</code>.
      */
     OStringBuffer( const OStringBuffer & value )
         : pData(NULL)
         , nCapacity( value.nCapacity )
     {
         rtl_stringbuffer_newFromStringBuffer( &pData, value.nCapacity, value.pData );
     }

     /**
         Constructs a string buffer with no characters in it and an
         initial capacity specified by the <code>length</code> argument.

         @param      length   the initial capacity.
      */
     OStringBuffer(sal_Int32 length)
         : pData(NULL)
         , nCapacity( length )
     {
         rtl_string_new_WithLength( &pData, length );
     }

     /**
         Constructs a string buffer so that it represents the same
         sequence of characters as the string argument.

         The initial
         capacity of the string buffer is <code>16</code> plus the length
         of the string argument.

         @param   value   the initial string value.
      */
     OStringBuffer(OString value)
         : pData(NULL)
         , nCapacity( value.getLength() + 16 )
     {
         rtl_stringbuffer_newFromStr_WithLength( &pData, value.getStr(), value.getLength() );
     }

     /** Assign to this a copy of value.
      */
     OStringBuffer& operator = ( const OStringBuffer& value )
     {
         if (this != &value)
         {
             rtl_stringbuffer_newFromStringBuffer(&pData,
                                                   value.nCapacity,
                                                   value.pData);
             nCapacity = value.nCapacity;
         }
         return *this;
     }

     /**
         Release the string data.
      */
     ~OStringBuffer()
     {
         rtl_string_release( pData );
     }

     /**
         Fill the string data in the new string and clear the buffer.

         This method is more efficient than the contructor of the string. It does
         not copy the buffer.

         @return the string previously contained in the buffer.
      */
     OString makeStringAndClear()
     {
         OString aRet( pData );
         rtl_string_new(&pData);
         nCapacity = 0;
         return aRet;
     }

     /**
         Returns the length (character count) of this string buffer.

         @return  the number of characters in this string buffer.
      */
     sal_Int32 getLength() const
     {
         return pData->length;
     }

     /**
         Returns the current capacity of the String buffer.

         The capacity
         is the amount of storage available for newly inserted
         characters. The real buffer size is 2 bytes longer, because
         all strings are 0 terminated.

         @return  the current capacity of this string buffer.
      */
     sal_Int32 getCapacity() const
     {
         return nCapacity;
     }

     /**
         Ensures that the capacity of the buffer is at least equal to the
         specified minimum.

         The new capacity will be at least as large as the maximum of the current
         length (so that no contents of the buffer is destroyed) and the given
         minimumCapacity.  If the given minimumCapacity is negative, nothing is
         changed.

         @param   minimumCapacity   the minimum desired capacity.
      */
     void ensureCapacity(sal_Int32 minimumCapacity)
     {
         rtl_stringbuffer_ensureCapacity( &pData, &nCapacity, minimumCapacity );
     }

     /**
         Sets the length of this String buffer.

         If the <code>newLength</code> argument is less than the current
         length of the string buffer, the string buffer is truncated to
         contain exactly the number of characters given by the
         <code>newLength</code> argument.
         <p>
         If the <code>newLength</code> argument is greater than or equal
         to the current length, sufficient null characters
         (<code>'&#92;u0000'</code>) are appended to the string buffer so that
         length becomes the <code>newLength</code> argument.
         <p>
         The <code>newLength</code> argument must be greater than or equal
         to <code>0</code>.

         @param      newLength   the new length of the buffer.
      */
     void setLength(sal_Int32 newLength)
     {
         OSL_ASSERT(newLength >= 0);
         // Avoid modifications if pData points to const empty string:
         if( newLength != pData->length )
         {
             if( newLength > nCapacity )
                 rtl_stringbuffer_ensureCapacity(&pData, &nCapacity, newLength);
             else
                 pData->buffer[newLength] = '\0';
             pData->length = newLength;
         }
     }

     /**
         Returns the character at a specific index in this string buffer.

         The first character of a string buffer is at index
         <code>0</code>, the next at index <code>1</code>, and so on, for
         array indexing.
         <p>
         The index argument must be greater than or equal to
         <code>0</code>, and less than the length of this string buffer.

         @param      index   the index of the desired character.
         @return     the character at the specified index of this string buffer.
      */
     sal_Char charAt( sal_Int32 index )
     {
         OSL_ASSERT(index >= 0 && index < pData->length);
         return pData->buffer[ index ];
     }

     /**
         Return a null terminated character array.
      */
     operator        const sal_Char *() const { return pData->buffer; }

     /**
         Return a null terminated character array.
      */
     const sal_Char* getStr() const { return pData->buffer; }


     /**
         The character at the specified index of this string buffer is set
         to <code>ch</code>.

         The index argument must be greater than or equal to
         <code>0</code>, and less than the length of this string buffer.

         @param      index   the index of the character to modify.
         @param      ch      the new character.
      */
     OStringBuffer & setCharAt(sal_Int32 index, sal_Char ch)
     {
         OSL_ASSERT(index >= 0 && index < pData->length);
         pData->buffer[ index ] = ch;
         return *this;
     }

     /**
         Appends the string to this string buffer.

         The characters of the <code>String</code> argument are appended, in
         order, to the contents of this string buffer, increasing the
         length of this string buffer by the length of the argument.

         @param   str   a string.
         @return  this string buffer.
      */
     OStringBuffer & append(const OString &str)
     {
         return append( str.getStr(), str.getLength() );
     }

     /**
         Appends the string representation of the <code>char</code> array
         argument to this string buffer.

         The characters of the array argument are appended, in order, to
         the contents of this string buffer. The length of this string
         buffer increases by the length of the argument.

         @param   str   the characters to be appended.
         @return  this string buffer.
      */
     OStringBuffer & append( const sal_Char * str )
     {
         return append( str, rtl_str_getLength( str ) );
     }

     /**
         Appends the string representation of the <code>char</code> array
         argument to this string buffer.

         Characters of the character array <code>str</code> are appended,
         in order, to the contents of this string buffer. The length of this
         string buffer increases by the value of <code>len</code>.

         @param str the characters to be appended; must be non-null, and must
         point to at least len characters
         @param len the number of characters to append; must be non-negative
         @return  this string buffer.
      */
     OStringBuffer & append( const sal_Char * str, sal_Int32 len)
     {
         // insert behind the last character
         rtl_stringbuffer_insert( &pData, &nCapacity, getLength(), str, len );
         return *this;
     }

     /**
         Appends the string representation of the <code>sal_Bool</code>
         argument to the string buffer.

         The argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then appended to this string buffer.

         @param   b   a <code>sal_Bool</code>.
         @return  this string buffer.
      */
     OStringBuffer & append(sal_Bool b)
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFBOOLEAN];
         return append( sz, rtl_str_valueOfBoolean( sz, b ) );
     }

     /**
         Appends the string representation of the <code>char</code>
         argument to this string buffer.

         The argument is appended to the contents of this string buffer.
         The length of this string buffer increases by <code>1</code>.

         @param   ch   a <code>char</code>.
         @return  this string buffer.
      */
     OStringBuffer & append(sal_Char c)
     {
         return append( &c, 1 );
     }

     /**
         Appends the string representation of the <code>sal_Int32</code>
         argument to this string buffer.

         The argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then appended to this string buffer.

         @param   i   an <code>sal_Int32</code>.
         @return  this string buffer.
      */
     OStringBuffer & append(sal_Int32 i, sal_Int16 radix = 10 )
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFINT32];
         return append( sz, rtl_str_valueOfInt32( sz, i, radix ) );
     }

     /**
         Appends the string representation of the <code>long</code>
         argument to this string buffer.

         The argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then appended to this string buffer.

         @param   l   a <code>long</code>.
         @return  this string buffer.
      */
     OStringBuffer & append(sal_Int64 l, sal_Int16 radix = 10 )
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFINT64];
         return append( sz, rtl_str_valueOfInt64( sz, l, radix ) );
     }

     /**
         Appends the string representation of the <code>float</code>
         argument to this string buffer.

         The argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then appended to this string buffer.

         @param   f   a <code>float</code>.
         @return  this string buffer.
      */
     OStringBuffer & append(float f)
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFFLOAT];
         return append( sz, rtl_str_valueOfFloat( sz, f ) );
     }

     /**
         Appends the string representation of the <code>double</code>
         argument to this string buffer.

         The argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then appended to this string buffer.

         @param   d   a <code>double</code>.
         @return  this string buffer.
      */
     OStringBuffer & append(double d)
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFDOUBLE];
         return append( sz, rtl_str_valueOfDouble( sz, d ) );
     }

     /**
         Inserts the string into this string buffer.

         The characters of the <code>String</code> argument are inserted, in
         order, into this string buffer at the indicated offset. The length
         of this string buffer is increased by the length of the argument.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      str      a string.
         @return     this string buffer.
      */
     OStringBuffer & insert(sal_Int32 offset, const OString & str)
     {
         return insert( offset, str.getStr(), str.getLength() );
     }

     /**
         Inserts the string representation of the <code>char</code> array
         argument into this string buffer.

         The characters of the array argument are inserted into the
         contents of this string buffer at the position indicated by
         <code>offset</code>. The length of this string buffer increases by
         the length of the argument.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      ch       a character array.
         @return     this string buffer.
      */
     OStringBuffer & insert( sal_Int32 offset, const sal_Char * str )
     {
         return insert( offset, str, rtl_str_getLength( str ) );
     }

     /**
         Inserts the string representation of the <code>char</code> array
         argument into this string buffer.

         The characters of the array argument are inserted into the
         contents of this string buffer at the position indicated by
         <code>offset</code>. The length of this string buffer increases by
         the length of the argument.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      ch       a character array.
         @param       len     the number of characters to append.
         @return     this string buffer.
      */
     OStringBuffer & insert( sal_Int32 offset, const sal_Char * str, sal_Int32 len)
     {
         // insert behind the last character
         rtl_stringbuffer_insert( &pData, &nCapacity, offset, str, len );
         return *this;
     }

     /**
         Inserts the string representation of the <code>sal_Bool</code>
         argument into this string buffer.

         The second argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then inserted into this string buffer at the indicated
         offset.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      b        a <code>sal_Bool</code>.
         @return     this string buffer.
      */
     OStringBuffer & insert(sal_Int32 offset, sal_Bool b)
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFBOOLEAN];
         return insert( offset, sz, rtl_str_valueOfBoolean( sz, b ) );
     }

     /**
         Inserts the string representation of the <code>char</code>
         argument into this string buffer.

         The second argument is inserted into the contents of this string
         buffer at the position indicated by <code>offset</code>. The length
         of this string buffer increases by one.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      ch       a <code>char</code>.
         @return     this string buffer.
      */
     OStringBuffer & insert(sal_Int32 offset, sal_Char c)
     {
         return insert( offset, &c, 1 );
     }

     /**
         Inserts the string representation of the second <code>sal_Int32</code>
         argument into this string buffer.

         The second argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then inserted into this string buffer at the indicated
         offset.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      b        an <code>sal_Int32</code>.
         @return     this string buffer.
      */
     OStringBuffer & insert(sal_Int32 offset, sal_Int32 i, sal_Int16 radix = 10 )
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFINT32];
         return insert( offset, sz, rtl_str_valueOfInt32( sz, i, radix ) );
     }

     /**
         Inserts the string representation of the <code>long</code>
         argument into this string buffer.

         The second argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then inserted into this string buffer at the indicated
         offset.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      b        a <code>long</code>.
         @return     this string buffer.
      */
     OStringBuffer & insert(sal_Int32 offset, sal_Int64 l, sal_Int16 radix = 10 )
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFINT64];
         return insert( offset, sz, rtl_str_valueOfInt64( sz, l, radix ) );
     }

     /**
         Inserts the string representation of the <code>float</code>
         argument into this string buffer.

         The second argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then inserted into this string buffer at the indicated
         offset.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      b        a <code>float</code>.
         @return     this string buffer.
      */
     OStringBuffer insert(sal_Int32 offset, float f)
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFFLOAT];
         return insert( offset, sz, rtl_str_valueOfFloat( sz, f ) );
     }

     /**
         Inserts the string representation of the <code>double</code>
         argument into this string buffer.

         The second argument is converted to a string as if by the method
         <code>String.valueOf</code>, and the characters of that
         string are then inserted into this string buffer at the indicated
         offset.
         <p>
         The offset argument must be greater than or equal to
         <code>0</code>, and less than or equal to the length of this
         string buffer.

         @param      offset   the offset.
         @param      b        a <code>double</code>.
         @return     this string buffer.
      */
     OStringBuffer & insert(sal_Int32 offset, double d)
     {
         sal_Char sz[RTL_STR_MAX_VALUEOFDOUBLE];
         return insert( offset, sz, rtl_str_valueOfDouble( sz, d ) );
     }
 private:
     /**
         A pointer to the data structur which contains the data.
      */
     rtl_String * pData;

     /**
         The len of the pData->buffer.
      */
     sal_Int32       nCapacity;
 };

 }

 #endif  /* __cplusplus */
 #endif  /* _RTL_STRBUF_HXX_ */
	/**************************************************************
	*
	* Licensed to the Apache Software Foundation (ASF) under one
	* or more contributor license agreements. See the NOTICE file
	* distributed with this work for additional information
	* regarding copyright ownership. The ASF licenses this file
	* to you under the Apache License, Version 2.0 (the
	* "License"); you may not use this file except in compliance
	* with the License. You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing,
	* software distributed under the License is distributed on an
	* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	* KIND, either express or implied. See the License for the
	* specific language governing permissions and limitations
	* under the License.
	*
	*************************************************************/



	#ifndef _RTL_STRBUF_HXX_
	#define _RTL_STRBUF_HXX_

	#include "osl/diagnose.h"
	#include <rtl/strbuf.h>
	#include <rtl/string.hxx>

	#ifdef __cplusplus

	namespace rtl
	{

	/** @HTML

	A string buffer implements a mutable sequence of characters.
	<p>
	String buffers are safe for use by multiple threads. The methods
	are synchronized where necessary so that all the operations on any
	particular instance behave as if they occur in some serial order.
	<p>
	String buffers are used by the compiler to implement the binary
	string concatenation operator <code>+</code>. For example, the code:
	<p><blockquote><pre>
	x = "a" + 4 + "c"
	</pre></blockquote><p>
	is compiled to the equivalent of:
	<p><blockquote><pre>
	x = new OStringBuffer().append("a").append(4).append("c")
	.toString()
	</pre></blockquote><p>
	The principal operations on a <code>OStringBuffer</code> are the
	<code>append</code> and <code>insert</code> methods, which are
	overloaded so as to accept data of any type. Each effectively
	converts a given datum to a string and then appends or inserts the
	characters of that string to the string buffer. The
	<code>append</code> method always adds these characters at the end
	of the buffer; the <code>insert</code> method adds the characters at
	a specified point.
	<p>
	For example, if <code>z</code> refers to a string buffer object
	whose current contents are "<code>start</code>", then
	the method call <code>z.append("le")</code> would cause the string
	buffer to contain "<code>startle</code>", whereas
	<code>z.insert(4, "le")</code> would alter the string buffer to
	contain "<code>starlet</code>".
	<p>
	Every string buffer has a capacity. As long as the length of the
	character sequence contained in the string buffer does not exceed
	the capacity, it is not necessary to allocate a new internal
	buffer array. If the internal buffer overflows, it is
	automatically made larger.
	*/
	class OStringBuffer
	{
	public:
	/**
	Constructs a string buffer with no characters in it and an
	initial capacity of 16 characters.
	*/
	OStringBuffer()
	: pData(NULL)
	, nCapacity( 16 )
	{
	rtl_string_new_WithLength( &pData, nCapacity );
	}

	/**
	Allocates a new string buffer that contains the same sequence of
	characters as the string buffer argument.

	@param value a <code>OStringBuffer</code>.
	*/
	OStringBuffer( const OStringBuffer & value )
	: pData(NULL)
	, nCapacity( value.nCapacity )
	{
	rtl_stringbuffer_newFromStringBuffer( &pData, value.nCapacity, value.pData );
	}

	/**
	Constructs a string buffer with no characters in it and an
	initial capacity specified by the <code>length</code> argument.

	@param length the initial capacity.
	*/
	OStringBuffer(sal_Int32 length)
	: pData(NULL)
	, nCapacity( length )
	{
	rtl_string_new_WithLength( &pData, length );
	}

	/**
	Constructs a string buffer so that it represents the same
	sequence of characters as the string argument.

	The initial
	capacity of the string buffer is <code>16</code> plus the length
	of the string argument.

	@param value the initial string value.
	*/
	OStringBuffer(OString value)
	: pData(NULL)
	, nCapacity( value.getLength() + 16 )
	{
	rtl_stringbuffer_newFromStr_WithLength( &pData, value.getStr(), value.getLength() );
	}

	/** Assign to this a copy of value.
	*/
	OStringBuffer& operator = ( const OStringBuffer& value )
	{
	if (this != &value)
	{
	rtl_stringbuffer_newFromStringBuffer(&pData,
	value.nCapacity,
	value.pData);
	nCapacity = value.nCapacity;
	}
	return *this;
	}

	/**
	Release the string data.
	*/
	~OStringBuffer()
	{
	rtl_string_release( pData );
	}

	/**
	Fill the string data in the new string and clear the buffer.

	This method is more efficient than the contructor of the string. It does
	not copy the buffer.

	@return the string previously contained in the buffer.
	*/
	OString makeStringAndClear()
	{
	OString aRet( pData );
	rtl_string_new(&pData);
	nCapacity = 0;
	return aRet;
	}

	/**
	Returns the length (character count) of this string buffer.

	@return the number of characters in this string buffer.
	*/
	sal_Int32 getLength() const
	{
	return pData->length;
	}

	/**
	Returns the current capacity of the String buffer.

	The capacity
	is the amount of storage available for newly inserted
	characters. The real buffer size is 2 bytes longer, because
	all strings are 0 terminated.

	@return the current capacity of this string buffer.
	*/
	sal_Int32 getCapacity() const
	{
	return nCapacity;
	}

	/**
	Ensures that the capacity of the buffer is at least equal to the
	specified minimum.

	The new capacity will be at least as large as the maximum of the current
	length (so that no contents of the buffer is destroyed) and the given
	minimumCapacity. If the given minimumCapacity is negative, nothing is
	changed.

	@param minimumCapacity the minimum desired capacity.
	*/
	void ensureCapacity(sal_Int32 minimumCapacity)
	{
	rtl_stringbuffer_ensureCapacity( &pData, &nCapacity, minimumCapacity );
	}

	/**
	Sets the length of this String buffer.

	If the <code>newLength</code> argument is less than the current
	length of the string buffer, the string buffer is truncated to
	contain exactly the number of characters given by the
	<code>newLength</code> argument.
	<p>
	If the <code>newLength</code> argument is greater than or equal
	to the current length, sufficient null characters
	(<code>'\u0000'</code>) are appended to the string buffer so that
	length becomes the <code>newLength</code> argument.
	<p>
	The <code>newLength</code> argument must be greater than or equal
	to <code>0</code>.

	@param newLength the new length of the buffer.
	*/
	void setLength(sal_Int32 newLength)
	{
	OSL_ASSERT(newLength >= 0);
	// Avoid modifications if pData points to const empty string:
	if( newLength != pData->length )
	{
	if( newLength > nCapacity )
	rtl_stringbuffer_ensureCapacity(&pData, &nCapacity, newLength);
	else
	pData->buffer[newLength] = '\0';
	pData->length = newLength;
	}
	}

	/**
	Returns the character at a specific index in this string buffer.

	The first character of a string buffer is at index
	<code>0</code>, the next at index <code>1</code>, and so on, for
	array indexing.
	<p>
	The index argument must be greater than or equal to
	<code>0</code>, and less than the length of this string buffer.

	@param index the index of the desired character.
	@return the character at the specified index of this string buffer.
	*/
	sal_Char charAt( sal_Int32 index )
	{
	OSL_ASSERT(index >= 0 && index < pData->length);
	return pData->buffer[ index ];
	}

	/**
	Return a null terminated character array.
	*/
	operator const sal_Char *() const { return pData->buffer; }

	/**
	Return a null terminated character array.
	*/
	const sal_Char* getStr() const { return pData->buffer; }


	/**
	The character at the specified index of this string buffer is set
	to <code>ch</code>.

	The index argument must be greater than or equal to
	<code>0</code>, and less than the length of this string buffer.

	@param index the index of the character to modify.
	@param ch the new character.
	*/
	OStringBuffer & setCharAt(sal_Int32 index, sal_Char ch)
	{
	OSL_ASSERT(index >= 0 && index < pData->length);
	pData->buffer[ index ] = ch;
	return *this;
	}

	/**
	Appends the string to this string buffer.

	The characters of the <code>String</code> argument are appended, in
	order, to the contents of this string buffer, increasing the
	length of this string buffer by the length of the argument.

	@param str a string.
	@return this string buffer.
	*/
	OStringBuffer & append(const OString &str)
	{
	return append( str.getStr(), str.getLength() );
	}

	/**
	Appends the string representation of the <code>char</code> array
	argument to this string buffer.

	The characters of the array argument are appended, in order, to
	the contents of this string buffer. The length of this string
	buffer increases by the length of the argument.

	@param str the characters to be appended.
	@return this string buffer.
	*/
	OStringBuffer & append( const sal_Char * str )
	{
	return append( str, rtl_str_getLength( str ) );
	}

	/**
	Appends the string representation of the <code>char</code> array
	argument to this string buffer.

	Characters of the character array <code>str</code> are appended,
	in order, to the contents of this string buffer. The length of this
	string buffer increases by the value of <code>len</code>.

	@param str the characters to be appended; must be non-null, and must
	point to at least len characters
	@param len the number of characters to append; must be non-negative
	@return this string buffer.
	*/
	OStringBuffer & append( const sal_Char * str, sal_Int32 len)
	{
	// insert behind the last character
	rtl_stringbuffer_insert( &pData, &nCapacity, getLength(), str, len );
	return *this;
	}

	/**
	Appends the string representation of the <code>sal_Bool</code>
	argument to the string buffer.

	The argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then appended to this string buffer.

	@param b a <code>sal_Bool</code>.
	@return this string buffer.
	*/
	OStringBuffer & append(sal_Bool b)
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFBOOLEAN];
	return append( sz, rtl_str_valueOfBoolean( sz, b ) );
	}

	/**
	Appends the string representation of the <code>char</code>
	argument to this string buffer.

	The argument is appended to the contents of this string buffer.
	The length of this string buffer increases by <code>1</code>.

	@param ch a <code>char</code>.
	@return this string buffer.
	*/
	OStringBuffer & append(sal_Char c)
	{
	return append( &c, 1 );
	}

	/**
	Appends the string representation of the <code>sal_Int32</code>
	argument to this string buffer.

	The argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then appended to this string buffer.

	@param i an <code>sal_Int32</code>.
	@return this string buffer.
	*/
	OStringBuffer & append(sal_Int32 i, sal_Int16 radix = 10 )
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFINT32];
	return append( sz, rtl_str_valueOfInt32( sz, i, radix ) );
	}

	/**
	Appends the string representation of the <code>long</code>
	argument to this string buffer.

	The argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then appended to this string buffer.

	@param l a <code>long</code>.
	@return this string buffer.
	*/
	OStringBuffer & append(sal_Int64 l, sal_Int16 radix = 10 )
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFINT64];
	return append( sz, rtl_str_valueOfInt64( sz, l, radix ) );
	}

	/**
	Appends the string representation of the <code>float</code>
	argument to this string buffer.

	The argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then appended to this string buffer.

	@param f a <code>float</code>.
	@return this string buffer.
	*/
	OStringBuffer & append(float f)
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFFLOAT];
	return append( sz, rtl_str_valueOfFloat( sz, f ) );
	}

	/**
	Appends the string representation of the <code>double</code>
	argument to this string buffer.

	The argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then appended to this string buffer.

	@param d a <code>double</code>.
	@return this string buffer.
	*/
	OStringBuffer & append(double d)
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFDOUBLE];
	return append( sz, rtl_str_valueOfDouble( sz, d ) );
	}

	/**
	Inserts the string into this string buffer.

	The characters of the <code>String</code> argument are inserted, in
	order, into this string buffer at the indicated offset. The length
	of this string buffer is increased by the length of the argument.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param str a string.
	@return this string buffer.
	*/
	OStringBuffer & insert(sal_Int32 offset, const OString & str)
	{
	return insert( offset, str.getStr(), str.getLength() );
	}

	/**
	Inserts the string representation of the <code>char</code> array
	argument into this string buffer.

	The characters of the array argument are inserted into the
	contents of this string buffer at the position indicated by
	<code>offset</code>. The length of this string buffer increases by
	the length of the argument.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param ch a character array.
	@return this string buffer.
	*/
	OStringBuffer & insert( sal_Int32 offset, const sal_Char * str )
	{
	return insert( offset, str, rtl_str_getLength( str ) );
	}

	/**
	Inserts the string representation of the <code>char</code> array
	argument into this string buffer.

	The characters of the array argument are inserted into the
	contents of this string buffer at the position indicated by
	<code>offset</code>. The length of this string buffer increases by
	the length of the argument.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param ch a character array.
	@param len the number of characters to append.
	@return this string buffer.
	*/
	OStringBuffer & insert( sal_Int32 offset, const sal_Char * str, sal_Int32 len)
	{
	// insert behind the last character
	rtl_stringbuffer_insert( &pData, &nCapacity, offset, str, len );
	return *this;
	}

	/**
	Inserts the string representation of the <code>sal_Bool</code>
	argument into this string buffer.

	The second argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then inserted into this string buffer at the indicated
	offset.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param b a <code>sal_Bool</code>.
	@return this string buffer.
	*/
	OStringBuffer & insert(sal_Int32 offset, sal_Bool b)
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFBOOLEAN];
	return insert( offset, sz, rtl_str_valueOfBoolean( sz, b ) );
	}

	/**
	Inserts the string representation of the <code>char</code>
	argument into this string buffer.

	The second argument is inserted into the contents of this string
	buffer at the position indicated by <code>offset</code>. The length
	of this string buffer increases by one.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param ch a <code>char</code>.
	@return this string buffer.
	*/
	OStringBuffer & insert(sal_Int32 offset, sal_Char c)
	{
	return insert( offset, &c, 1 );
	}

	/**
	Inserts the string representation of the second <code>sal_Int32</code>
	argument into this string buffer.

	The second argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then inserted into this string buffer at the indicated
	offset.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param b an <code>sal_Int32</code>.
	@return this string buffer.
	*/
	OStringBuffer & insert(sal_Int32 offset, sal_Int32 i, sal_Int16 radix = 10 )
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFINT32];
	return insert( offset, sz, rtl_str_valueOfInt32( sz, i, radix ) );
	}

	/**
	Inserts the string representation of the <code>long</code>
	argument into this string buffer.

	The second argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then inserted into this string buffer at the indicated
	offset.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param b a <code>long</code>.
	@return this string buffer.
	*/
	OStringBuffer & insert(sal_Int32 offset, sal_Int64 l, sal_Int16 radix = 10 )
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFINT64];
	return insert( offset, sz, rtl_str_valueOfInt64( sz, l, radix ) );
	}

	/**
	Inserts the string representation of the <code>float</code>
	argument into this string buffer.

	The second argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then inserted into this string buffer at the indicated
	offset.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param b a <code>float</code>.
	@return this string buffer.
	*/
	OStringBuffer insert(sal_Int32 offset, float f)
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFFLOAT];
	return insert( offset, sz, rtl_str_valueOfFloat( sz, f ) );
	}

	/**
	Inserts the string representation of the <code>double</code>
	argument into this string buffer.

	The second argument is converted to a string as if by the method
	<code>String.valueOf</code>, and the characters of that
	string are then inserted into this string buffer at the indicated
	offset.
	<p>
	The offset argument must be greater than or equal to
	<code>0</code>, and less than or equal to the length of this
	string buffer.

	@param offset the offset.
	@param b a <code>double</code>.
	@return this string buffer.
	*/
	OStringBuffer & insert(sal_Int32 offset, double d)
	{
	sal_Char sz[RTL_STR_MAX_VALUEOFDOUBLE];
	return insert( offset, sz, rtl_str_valueOfDouble( sz, d ) );
	}
	private:
	/**
	A pointer to the data structur which contains the data.
	*/
	rtl_String * pData;

	/**
	The len of the pData->buffer.
	*/
	sal_Int32 nCapacity;
	};

	}

	#endif /* __cplusplus */
	#endif /* _RTL_STRBUF_HXX_ */