| *PPD-Adobe: "4.3" | |
| *% Adobe Systems PostScript(R) Printer Description File | |
| *% Copyright 1987-1995 Adobe Systems Incorporated. | |
| *% All Rights Reserved. | |
| *% Permission is granted for redistribution of this file as | |
| *% long as this copyright notice is intact and the contents | |
| *% of the file is not altered in any way from its original form. | |
| *% End of Copyright statement | |
| *FormatVersion: "4.3" | |
| *FileVersion: "1.2" | |
| *LanguageEncoding: ISOLatin1 | |
| *LanguageVersion: English | |
| *Product: "(Phaser 350)" | |
| *PSVersion: "(2015.105) 10" | |
| *Manufacturer: "Tektronix" | |
| *ModelName: "Tektronix Phaser 350" | |
| *ShortNickName: "Tektronix Phaser 350" | |
| *NickName: "Tektronix Phaser 350" | |
| *PCFileName: "TK350171.PPD" | |
| *% === Installable Options =========== | |
| *OpenGroup: InstallableOptions/Options Installed | |
| *OpenUI *InstalledMemory/Memory Configuration: PickOne | |
| *DefaultInstalledMemory: 24Meg | |
| *InstalledMemory None/Standard 8 MB RAM: "" | |
| *InstalledMemory 12Meg/12 MB Total RAM: "" | |
| *InstalledMemory 24Meg/24 MB Total RAM: "" | |
| *?InstalledMemory: " | |
| currentsystemparams /RamSize get | |
| 16#100000 div round cvi | |
| dup 14 lt | |
| { pop (None) } {2 string cvs print (Meg) } ifelse | |
| = flush" | |
| *End | |
| *CloseUI: *InstalledMemory | |
| *OpenUI *Option1/Optional Hard Drive: Boolean | |
| *DefaultOption1: False | |
| *Option1 True/Installed: "" | |
| *Option1 False/Not Installed: "" | |
| *?Option1: " | |
| save false | |
| (%disk?%) | |
| { currentdevparams dup /Writeable known | |
| { /Writeable get {pop true} if } {pop} ifelse | |
| } 10 string /IODevice resourceforall | |
| {(True)}{(False)} ifelse = flush | |
| restore" | |
| *End | |
| *CloseUI: *Option1 | |
| *OpenUI *Option2/Optional Network Card: PickOne | |
| *DefaultOption2: None | |
| *Option2 None/Not Installed: "" | |
| *Option2 P1/EtherTalk, NetWare and TCP/IP: "" | |
| *Option2 P2/TokenTalk, NetWare and TCP/IP: "" | |
| *Option2 P3/LocalTalk and Serial: "" | |
| *?Option2: " | |
| (%EthernetPhysical%) /IODevice resourcestatus | |
| {pop pop (P1) } | |
| { | |
| (%LocalTalk%) /IODevice resourcestatus | |
| {pop pop (P3) } | |
| { | |
| (%TokenRingPhysical%) /IODevice resourcestatus | |
| {pop pop (P2) } { (None) } ifelse | |
| } ifelse | |
| } ifelse = flush" | |
| *End | |
| *CloseUI: *Option2 | |
| *OpenUI *Option3/Optional Lower Tray: Boolean | |
| *DefaultOption3: False | |
| *Option3 True/Installed: "" | |
| *Option3 False/Not Installed: "" | |
| *?Option3: " | |
| currentpagedevice /InputAttributes get 1 known | |
| { (True) } { (False) } ifelse = flush" | |
| *End | |
| *CloseUI: *Option3 | |
| *CloseGroup: InstallableOptions | |
| *% === Basic Device Capabilities ============ | |
| *LanguageLevel: "2" | |
| *Protocols: BCP | |
| *FreeVM: "16000000" | |
| *VMOption None/Standard 8 MB RAM: "2300000" | |
| *VMOption 12Meg/12 MB Total RAM: "6100000" | |
| *VMOption 24Meg/24 MB Total RAM: "16000000" | |
| *ColorDevice: True | |
| *DefaultColorSpace: CMYK | |
| *AccurateScreensSupport: True | |
| *SuggestedJobTimeout: "0" | |
| *SuggestedWaitTimeout: "300" | |
| *SuggestedManualFeedTimeout: "60" | |
| *1284Modes Parallel: Compat Nibble | |
| *1284DeviceID: " | |
| MANUFACTURER:Tektronix;COMMAND SET:Adobe Level 2 PostScript; | |
| MODEL:Phaser 350;CLASS:Printer;DESCRIPTION: | |
| Phaser 350 Color Page Printer, PostScript Level 2, Letter / A4 Size; | |
| COMPATIBLE_ID:" | |
| *End | |
| *TTRasterizer: Type42 | |
| *?TTRasterizer: " | |
| save | |
| 42 /FontType resourcestatus | |
| { pop pop (Type42)} {pop pop (None)} ifelse = flush | |
| restore | |
| " | |
| *End | |
| *FileSystem: True | |
| *?FileSystem: " | |
| save false | |
| (%disk?%) | |
| { currentdevparams dup /Writeable known | |
| { /Writeable get {pop true} if } {pop} ifelse | |
| } 10 string /IODevice resourceforall | |
| {(True)}{(False)} ifelse = flush | |
| restore" | |
| *End | |
| *Throughput: "6" | |
| *Password: "(0)" | |
| *ExitServer: " | |
| count 0 eq | |
| { false } { true exch startjob } ifelse | |
| not | |
| { (WARNING: Cannot modify initial VM.) = | |
| (Missing or invalid password.) = | |
| (Please contact the author of this software.) = flush quit | |
| } if | |
| " | |
| *End | |
| *Reset: " | |
| count 0 eq | |
| { false } { true exch startjob } ifelse | |
| not | |
| { (WARNING: Cannot reset printer.) = | |
| (Missing or invalid password.) = | |
| (Please contact the author of this software.) = flush quit | |
| } if | |
| systemdict /quit get exec | |
| (WARNING : Printer Reset Failed.) = flush" | |
| *End | |
| *% === Constraints =================== | |
| *% | |
| *UIConstraints: *InstalledMemory None *OutputMode Enhanced | |
| *UIConstraints: *InstalledMemory 12Meg *OutputMode Enhanced | |
| *UIConstraints: *VMOption None *OutputMode Enhanced | |
| *UIConstraints: *VMOption 12Meg *OutputMode Enhanced | |
| *UIConstraints: *Option3 False *InputSlot Lower | |
| *UIConstraints: *OutputMode Enhanced *InstalledMemory None | |
| *UIConstraints: *OutputMode Enhanced *InstalledMemory 12Meg | |
| *UIConstraints: *OutputMode Enhanced *VMOption None | |
| *UIConstraints: *OutputMode Enhanced *VMOption 12Meg | |
| *UIConstraints: *InputSlot Lower *Option3 False | |
| *% Resolution/Print Quality Selection =================== | |
| *DefaultResolution: 300x300dpi | |
| *SetResolution 300x300dpi : "" | |
| *SetResolution 600x300dpi : "" | |
| *OpenUI *OutputMode/Print Quality: PickOne | |
| *OrderDependency: 40.0 AnySetup *OutputMode | |
| *DefaultOutputMode: Standard | |
| *OutputMode FastColor/Fast Color: " | |
| << | |
| /HWResolution /Default /OutputDevice findresource /HWResolution get 0 get | |
| >> setpagedevice" | |
| *End | |
| *OutputMode Standard/Standard: " | |
| << | |
| /HWResolution /Default /OutputDevice findresource /HWResolution get 1 get | |
| >> setpagedevice" | |
| *End | |
| *OutputMode Enhanced/Enhanced: " | |
| << | |
| /HWResolution /Default /OutputDevice findresource /HWResolution get | |
| dup length 1 sub get | |
| >> setpagedevice" | |
| *End | |
| *?OutputMode: " | |
| currentpagedevice /HWResolution get 0 get dup 300 lt | |
| { | |
| pop (FastColor) | |
| } | |
| { | |
| 300 gt | |
| { | |
| (Enhanced) | |
| } | |
| { | |
| (Standard) | |
| } ifelse | |
| } ifelse | |
| = flush" | |
| *End | |
| *CloseUI: *OutputMode | |
| *% Halftone Information ================= | |
| *DefaultHalftoneType: 9 | |
| *ScreenFreq: "60.0" | |
| *ScreenAngle: "0.0" | |
| *DefaultScreenProc: Dot | |
| *ScreenProc Dot: " | |
| {180 mul cos exch 180 mul cos add 2 div} bind" | |
| *End | |
| *DefaultTransfer: Null | |
| *Transfer Null: "{ }" | |
| *Transfer Null.Inverse: "{ 1 exch sub } bind" | |
| *% Tray Selection ============ | |
| *OpenUI *InputSlot: PickOne | |
| *OrderDependency: 42.0 AnySetup *InputSlot | |
| *DefaultInputSlot: Paper | |
| *InputSlot Upper: " | |
| << | |
| /MediaPosition 0 | |
| /MediaType null | |
| /TraySwitch false | |
| /ManualFeed false | |
| >> setpagedevice" | |
| *End | |
| *InputSlot Lower: " | |
| << | |
| /MediaPosition 1 | |
| /MediaType null | |
| /TraySwitch false | |
| /ManualFeed false | |
| >> setpagedevice" | |
| *End | |
| *InputSlot Paper: " | |
| << | |
| /MediaPosition null | |
| /MediaType (Paper) | |
| /TraySwitch true | |
| /ManualFeed false | |
| >> setpagedevice" | |
| *End | |
| *InputSlot Transparency: " | |
| << | |
| /MediaPosition null | |
| /MediaType (Transparency) | |
| /TraySwitch true | |
| /ManualFeed false | |
| >> setpagedevice" | |
| *End | |
| *InputSlot ManualPaper/Manual Paper: " | |
| << | |
| /MediaPosition null | |
| /MediaType (Paper) | |
| /TraySwitch false | |
| /ManualFeed true | |
| >> setpagedevice" | |
| *End | |
| *InputSlot ManualTransparency/Manual Transparency: " | |
| << | |
| /MediaPosition null | |
| /MediaType (Transparency) | |
| /TraySwitch false | |
| /ManualFeed true | |
| >> setpagedevice" | |
| *End | |
| *?InputSlot: " | |
| save | |
| currentpagedevice /MediaPosition get | |
| dup null eq | |
| { pop currentpagedevice /MediaType get | |
| dup null eq | |
| { pop (Upper) } | |
| { dup (Paper) eq | |
| { pop currentpagedevice /ManualFeed get | |
| { (ManualPaper) } | |
| { (Paper) } ifelse | |
| } | |
| { | |
| (Transparency) eq | |
| { currentpagedevice /ManualFeed get | |
| { (ManualTransparency) } | |
| { (Transparency) } ifelse | |
| } | |
| { (Unknown) } ifelse | |
| } ifelse | |
| } ifelse | |
| } | |
| { | |
| dup 0 eq | |
| { pop (Upper) } | |
| { 1 eq | |
| { (Lower) } | |
| { (Unknown) } ifelse | |
| } ifelse | |
| } ifelse | |
| = flush restore" | |
| *End | |
| *CloseUI: *InputSlot | |
| *% Paper Handling =================== | |
| *% Use these entries to set paper size most of the time, unless there is | |
| *% specific reason to use PageRegion. | |
| *OpenUI *PageSize: PickOne | |
| *OrderDependency: 44.0 AnySetup *PageSize | |
| *DefaultPageSize: Letter | |
| *PageSize Letter: "<< /PageSize [612 792] /ImagingBBox null | |
| >> setpagedevice" | |
| *End | |
| *PageSize A4: "<< /PageSize [595 842] /ImagingBBox null | |
| >> setpagedevice" | |
| *End | |
| *?PageSize: " | |
| save currentpagedevice /PageSize get aload pop | |
| 2 copy gt {exch} if (Unknown) | |
| << | |
| [612 792] (Letter) | |
| [595 842] (A4) >> | |
| { exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and | |
| { exch pop exit } { pop } ifelse | |
| } bind forall = flush pop pop restore" | |
| *End | |
| *CloseUI: *PageSize | |
| *% These entries will set up the frame buffer. Usually used with manual feed. | |
| *OpenUI *PageRegion: PickOne | |
| *OrderDependency: 46.0 AnySetup *PageRegion | |
| *DefaultPageRegion: Letter | |
| *PageRegion Letter: "<< /PageSize [612 792] /ImagingBBox null | |
| >> setpagedevice" | |
| *End | |
| *PageRegion A4: "<< /PageSize [595 842] /ImagingBBox null | |
| >> setpagedevice" | |
| *End | |
| *CloseUI: *PageRegion | |
| *% The following entries provide information about specific paper keywords. | |
| *DefaultImageableArea: Letter | |
| *ImageableArea Letter: "14.16 25.8 597.84 777.96" | |
| *ImageableArea A4: "13.45 25.81 581.76 827.88" | |
| *?ImageableArea: " | |
| << /HWResolution [300 300] >> setpagedevice | |
| clippath pathbbox | |
| /cvp {16 string cvs print ( ) print} def | |
| 4 3 roll 100 mul ceiling 100 div cvp | |
| 3 2 roll 100 mul ceiling 100 div cvp | |
| exch 100 mul floor 100 div cvp | |
| 100 mul floor 100 div = flush | |
| userdict /cvp undef" | |
| *End | |
| *% These provide the physical dimensions of the paper (by keyword) | |
| *DefaultPaperDimension: Letter | |
| *PaperDimension Letter: "612 792" | |
| *PaperDimension A4: "595 842" | |
| *DefaultOutputOrder: Normal | |
| *RequiresPageRegion All: True | |
| *% TKColor Selections =================== | |
| *OpenUI *TKColor/Color Correction: PickOne | |
| *OrderDependency: 50.0 AnySetup *TKColor | |
| *DefaultTKColor: VividColor/Vivid Color | |
| *TKColor NoAdjust/None: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice null | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor VividColor/Vivid Color: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice << | |
| /Type 3 | |
| /ColorTransform /TekBlue | |
| >> | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor SimulateDisplay/Simulate Display: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice << | |
| /Type 3 | |
| /ColorTransform /TekDisplay | |
| >> | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor SWOPPress/SWOP Press: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice << | |
| /Type 3 | |
| /ColorTransform /SWOP-Coated | |
| >> | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor EuroscalePress/Euroscale Press: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice << | |
| /Type 3 | |
| /ColorTransform /Euroscale-Coated | |
| >> | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor CommercialPress/Commercial Press: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice << | |
| /Type 3 | |
| /ColorTransform /Commercial-Coated | |
| >> | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor Monochrome: " | |
| << | |
| /DeviceRenderingInfo << | |
| /Type 2 | |
| /VirtualColorDevice << | |
| /Type 1 | |
| /ColorTransform /Gray | |
| >> | |
| >> | |
| >> setpagedevice" | |
| *End | |
| *TKColor UsePrinterSetting/Use Printer Setting: "" | |
| *?TKColor: "save | |
| { currentpagedevice /DeviceRenderingInfo get | |
| /VirtualColorDevice get | |
| dup null eq | |
| { pop (NoAdjust) } | |
| { /ColorTransform get | |
| << | |
| /TekBlue (VividColor) | |
| /TekDisplay (SimulateDisplay) | |
| /SWOP-Coated (SWOPPress) | |
| /Euroscale-Coated (EuroscalePress) | |
| /Commercial-Coated (CommercialPress) | |
| /Gray (Monochrome) | |
| >> | |
| exch get | |
| } ifelse | |
| } stopped | |
| { % error in PostScript code execution | |
| pop pop (Unknown) | |
| } if | |
| = flush restore" | |
| *End | |
| *CloseUI: *TKColor | |
| *OpenUI *TKImageSmoothing/Image Smoothing: Boolean | |
| *OrderDependency: 52.0 AnySetup *TKImageSmoothing | |
| *DefaultTKImageSmoothing: False | |
| *TKImageSmoothing False: " | |
| false /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec" | |
| *End | |
| *TKImageSmoothing True: " | |
| true /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec" | |
| *End | |
| *?TKImageSmoothing: " | |
| save | |
| /RRCustomProcs /ProcSet findresource /currentforceinterpolate get exec | |
| {(True)}{(False)} ifelse | |
| = flush restore" | |
| *End | |
| *CloseUI: *TKImageSmoothing | |
| *% Font Information ===================== | |
| *DefaultFont: Courier | |
| *Font Courier: Standard "(002.003)" Standard ROM | |
| *Font Courier-Bold: Standard "(002.003)" Standard ROM | |
| *Font Courier-BoldOblique: Standard "(002.003)" Standard ROM | |
| *Font Courier-Oblique: Standard "(002.003)" Standard ROM | |
| *Font Helvetica: Standard "(001.006)" Standard ROM | |
| *Font Helvetica-Bold: Standard "(001.007)" Standard ROM | |
| *Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM | |
| *Font Helvetica-Narrow: Standard "(001.006)" Standard ROM | |
| *Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM | |
| *Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM | |
| *Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM | |
| *Font Helvetica-Oblique: Standard "(001.006)" Standard ROM | |
| *Font Symbol: Special "(001.007)" Special ROM | |
| *Font Times-Bold: Standard "(001.007)" Standard ROM | |
| *Font Times-BoldItalic: Standard "(001.009)" Standard ROM | |
| *Font Times-Italic: Standard "(001.007)" Standard ROM | |
| *Font Times-Roman: Standard "(001.007)" Standard ROM | |
| *?FontQuery: " | |
| save | |
| { count 1 gt | |
| { exch dup 127 string cvs (/) print print (:) print | |
| /Font resourcestatus {pop pop (Yes)} {(No)} ifelse = | |
| } { exit } ifelse | |
| } bind loop | |
| (*) = flush restore" | |
| *End | |
| *?FontList: " | |
| save (*) {cvn ==} 128 string /Font resourceforall | |
| (*) = flush restore" | |
| *End | |
| *DefaultColorSep: ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi | |
| *InkName: ProcessBlack/Process Black | |
| *InkName: CustomColor/Custom Color | |
| *InkName: ProcessCyan/Process Cyan | |
| *InkName: ProcessMagenta/Process Magenta | |
| *InkName: ProcessYellow/Process Yellow | |
| *% For 60 lpi / 300x300 dpi =============================== | |
| *ColorSepScreenAngle ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0" | |
| *ColorSepScreenAngle CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0" | |
| *ColorSepScreenAngle ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0" | |
| *ColorSepScreenAngle ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0" | |
| *ColorSepScreenAngle ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0" | |
| *ColorSepScreenFreq ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60" | |
| *ColorSepScreenFreq CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60" | |
| *ColorSepScreenFreq ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60" | |
| *ColorSepScreenFreq ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60" | |
| *ColorSepScreenFreq ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60" | |
| *% The byte count of this file should be exactly 014657 or 015208 | |
| *% depending on the filesystem it resides in. | |
| *% end of PPD file for Tektronix Phaser 350 | |