*PPD-Adobe: "4.2" | |
*% Adobe PostScript(R) Printer Description File | |
*% For Lexmark Optra N Laser Printer | |
*% Produced by Lexmark International, Inc. | |
*% | |
*% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved. | |
*% Permission is granted for redistribution of this file as | |
*% long as this copyright notice is intact and the content | |
*% of the file is not altered in any way from its original form. | |
*% | |
*% | |
*% WARNING: If you want to edit this PPD file and use it with Aldus | |
*% PageMaker, be sure to use an editor (such as DOS Edit) | |
*% that does NOT add an end-of-file marker (hex 1A) when | |
*% it stores the file. | |
*% | |
*% | |
*% | |
*FormatVersion: "4.2" | |
*FileVersion: "1.1" | |
*LanguageVersion: English | |
*LanguageEncoding: WindowsANSI | |
*PCFileName: "LOPTRAN.PPD" | |
*Product: "(Lexmark Optra N Laser Printer)" | |
*PSVersion: "" | |
*ModelName: "Lexmark Optra N Laser Printer" | |
*ShortNickName: "Lexmark Optra N PS" | |
*NickName: "Lexmark Optra N PS" | |
*% === Options and Constraints ============ | |
*OpenGroup: InstallableOptions/Options Installed | |
*OpenUI *Option1/Paper Input Drawer - Option: Boolean | |
*DefaultOption1: False | |
*Option1 True/Installed: "" | |
*Option1 False/Not Installed: "" | |
*CloseUI: *Option1 | |
*OpenUI *Option2/Envelope Feeder - Option: Boolean | |
*DefaultOption2: False | |
*Option2 True/Installed: "" | |
*Option2 False/Not Installed: "" | |
*CloseUI: *Option2 | |
*OpenUI *Option3/Finisher - Option: Boolean | |
*DefaultOption3: False | |
*Option3 True/Installed: "" | |
*Option3 False/Not Installed: "" | |
*CloseUI: *Option3 | |
*OpenUI *Option4/Duplex - Option: Boolean | |
*DefaultOption4: False | |
*Option4 True/Installed: "" | |
*Option4 False/Not Installed: "" | |
*CloseUI: *Option4 | |
*OpenUI *Option5/Flash Memory Card - Option: Boolean | |
*DefaultOption5: False | |
*Option5 False/Not Installed: "" | |
*Option5 True/Installed: "" | |
*CloseUI: *Option5 | |
*OpenUI *Option6/Printer Hard Disk - Option: Boolean | |
*DefaultOption6: False | |
*Option6 False/Not Installed: "" | |
*Option6 True/Installed: "" | |
*CloseUI: *Option6 | |
*OpenUI *InstalledMemory/Printer Memory - Option: PickOne | |
*DefaultInstalledMemory: 4Meg | |
*InstalledMemory 4Meg/4 MB Printer Memory: "" | |
*InstalledMemory 6Meg/6 MB Printer Memory: "" | |
*InstalledMemory 8Meg/8 MB Printer Memory: "" | |
*InstalledMemory 10Meg/10 MB Printer Memory: "" | |
*InstalledMemory 12Meg/12 MB Printer Memory: "" | |
*InstalledMemory 16Meg/16 MB Printer Memory: "" | |
*InstalledMemory 18Meg/18 MB Printer Memory: "" | |
*InstalledMemory 20Meg/20 MB Printer Memory: "" | |
*InstalledMemory 24Meg/24 MB Printer Memory: "" | |
*InstalledMemory 32Meg/32 or more MB Printer Memory: "" | |
*CloseUI: *InstalledMemory | |
*CloseGroup: InstallableOptions | |
*% === User Constraints ============ | |
*% If Input Deck is not installed then do not show as input source | |
*UIConstraints: *Option1 False *InputSlot Tray3 | |
*UIConstraints: *Option1 False *TraySwitch Tray23 | |
*UIConstraints: *Option1 False *TraySwitch Tray123 | |
*% If Envelope feeder is not installed then do not show as input source | |
*UIConstraints: *Option2 False *InputSlot Feeder | |
*UIConstraints: *Option3 False *StapleLocation Staple1 | |
*UIConstraints: *Option3 False *StapleLocation Staple2 | |
*UIConstraints: *OutputBin Bin0 *StapleLocation Staple1 | |
*UIConstraints: *OutputBin Bin0 *StapleLocation Staple2 | |
*% If Duplex is not installed then inhibit: | |
*UIConstraints: *Option4 False *Duplex | |
*% If Flash is not installed then inhibit: | |
*UIConstraints: *Option5 None *Flash | |
*% If HardDisk is not installed then inhibit: | |
*UIConstraints: *Option6 False *HardDisk | |
*% If the paper source is Tray1 exclude the following paper sizes: | |
*UIConstraints: *InputSlot Tray1 *PageSize B5 | |
*UIConstraints: *InputSlot Tray1 *PageSize Executive | |
*UIConstraints: *InputSlot Tray1 *PageSize A5 | |
*UIConstraints: *InputSlot Tray1 *PageSize Monarch | |
*UIConstraints: *InputSlot Tray1 *PageSize C4 | |
*UIConstraints: *InputSlot Tray1 *PageSize Comm10 | |
*UIConstraints: *InputSlot Tray1 *PageSize DL | |
*UIConstraints: *InputSlot Tray1 *PageSize C5 | |
*UIConstraints: *InputSlot Tray1 *PageSize ISOB5 | |
*UIConstraints: *InputSlot Tray1 *PageSize C3 | |
*UIConstraints: *InputSlot Tray1 *PageSize Tabloid | |
*UIConstraints: *InputSlot Tray1 *PageSize Universal | |
*UIConstraints: *InputSlot Tray1 *PageSize A3 | |
*% If the paper source is Tray2 exclude the following paper sizes: | |
*UIConstraints: *InputSlot Tray2 *PageSize B5 | |
*UIConstraints: *InputSlot Tray2 *PageSize Executive | |
*UIConstraints: *InputSlot Tray2 *PageSize A5 | |
*UIConstraints: *InputSlot Tray2 *PageSize Monarch | |
*UIConstraints: *InputSlot Tray2 *PageSize C4 | |
*UIConstraints: *InputSlot Tray2 *PageSize Comm10 | |
*UIConstraints: *InputSlot Tray2 *PageSize DL | |
*UIConstraints: *InputSlot Tray2 *PageSize C5 | |
*UIConstraints: *InputSlot Tray2 *PageSize ISOB5 | |
*UIConstraints: *InputSlot Tray2 *PageSize C3 | |
*UIConstraints: *InputSlot Tray2 *PageSize Universal | |
*% If the paper source is Tray3 exclude the following paper sizes: | |
*UIConstraints: *InputSlot Tray3 *PageSize B5 | |
*UIConstraints: *InputSlot Tray3 *PageSize Executive | |
*UIConstraints: *InputSlot Tray3 *PageSize A5 | |
*UIConstraints: *InputSlot Tray3 *PageSize Monarch | |
*UIConstraints: *InputSlot Tray3 *PageSize C4 | |
*UIConstraints: *InputSlot Tray3 *PageSize Comm10 | |
*UIConstraints: *InputSlot Tray3 *PageSize DL | |
*UIConstraints: *InputSlot Tray3 *PageSize C5 | |
*UIConstraints: *InputSlot Tray3 *PageSize ISOB5 | |
*UIConstraints: *InputSlot Tray3 *PageSize C3 | |
*UIConstraints: *InputSlot Tray3 *PageSize Universal | |
*% If the paper source is Envelope Feeder exclude the following paper sizes: | |
*UIConstraints: *InputSlot Feeder *PageSize Letter | |
*UIConstraints: *InputSlot Feeder *PageSize Legal | |
*UIConstraints: *InputSlot Feeder *PageSize Executive | |
*UIConstraints: *InputSlot Feeder *PageSize A4 | |
*UIConstraints: *InputSlot Feeder *PageSize A5 | |
*UIConstraints: *InputSlot Feeder *PageSize B4 | |
*UIConstraints: *InputSlot Feeder *PageSize B5 | |
*UIConstraints: *InputSlot Feeder *PageSize A3 | |
*UIConstraints: *InputSlot Feeder *PageSize Tabloid | |
*UIConstraints: *InputSlot Feeder *PageSize Universal | |
*UIConstraints: *InputSlot Feeder *PageSize C3 | |
*% If the paper source is Manual Envelope exclude the following paper sizes: | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize Letter | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize Legal | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize Executive | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize A4 | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize A5 | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize B4 | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize B5 | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize A3 | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize Tabloid | |
*UIConstraints: *InputSlot ManualEnvelope *PageSize Universal | |
*% If the paper source in Manual Paper then exclude Envelopes | |
*UIConstraints: *InputSlot ManualPaper *PageSize Monarch | |
*UIConstraints: *InputSlot ManualPaper *PageSize C4 | |
*UIConstraints: *InputSlot ManualPaper *PageSize Comm10 | |
*UIConstraints: *InputSlot ManualPaper *PageSize DL | |
*UIConstraints: *InputSlot ManualPaper *PageSize C5 | |
*UIConstraints: *InputSlot ManualPaper *PageSize ISOB5 | |
*UIConstraints: *InputSlot ManualPaper *PageSize C3 | |
*% If Resolution is 1200 dpi inhibit text smoothing | |
*UIConstraints: *Resolution 1200dpi *Smoothing | |
*% If resolution is other than 600 dpi inhibit PictureGrade and IET | |
*UIConstraints: *Resolution 300dpi *JCLPictureGrade On | |
*UIConstraints: *Resolution 300dpi *JCLPictureGrade Off | |
*UIConstraints: *Resolution 1200dpi *JCLPictureGrade On | |
*UIConstraints: *Resolution 1200dpi *JCLPictureGrade Off | |
*UIConstraints: *Resolution 300dpi *ImageEnhance | |
*UIConstraints: *Resolution 1200dpi *ImageEnhance | |
*UIConstraints: *ImageEnhance On *JCLPictureGrade On | |
*UIConstraints: *ImageEnhance On *JCLPictureGrade Off | |
*UIConstraints: *JCLPictureGrade On *ImageEnhance | |
*UIConstraints: *ImageEnhance On *Smoothing | |
*UIConstraints: *Smoothing True *ImageEnhance | |
*% === Basic Capabilities ============ | |
*LanguageLevel: "2" | |
*Protocols: PJL TBCP | |
*ColorDevice: False | |
*DefaultColorSpace: Gray | |
*TTRasterizer: Type42 | |
*FileSystem: True | |
*Throughput: "24" | |
*FreeVM: "910000" | |
*VMOption 4Meg: "910000" | |
*VMOption 6Meg: "1034000" | |
*VMOption 8Meg: "1290000" | |
*VMOption 10Meg: "1290000" | |
*VMOption 12Meg: "1546000" | |
*VMOption 16Meg: "2058000" | |
*VMOption 18Meg: "2058000" | |
*VMOption 20Meg: "2058000" | |
*VMOption 24Meg: "2058000" | |
*VMOption 32Meg: "2058000" | |
*Password: "0" | |
*ExitServer: " | |
count 0 eq % is the password on the stack? | |
{ true } | |
{ dup % potential password | |
statusdict /checkpassword get exec not | |
} ifelse | |
{ % if no password or not valid | |
(WARNING : Cannot perform the exitserver command.) = | |
(Password supplied is not valid.) = | |
(Please contact the author of this software.) = flush | |
quit | |
} if | |
serverdict /exitserver get exec | |
" | |
*End | |
*Reset: " | |
count 0 eq % is the password on the stack? | |
{ true } | |
{ dup % potential password | |
statusdict /checkpassword get exec not | |
} ifelse | |
{ % if no password or not valid | |
(WARNING : Cannot reset printer.) = | |
(Password supplied is not valid.) = | |
(Please contact the author of this software.) = flush | |
quit | |
} if | |
serverdict /exitserver get exec | |
systemdict /quit get exec | |
(WARNING : Printer Reset Failed.) = flush | |
" | |
*End | |
*% === Job Control Language == | |
*JCLBegin: "<1B>%-12345X@PJL JOB<0A>" | |
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>" | |
*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X" | |
*JCLOpenUI *JCLPortRotation/Port Rotation: PickOne | |
*DefaultJCLPortRotation: None | |
*OrderDependency: 10 JCLSetup *JCLPortRotation | |
*JCLPortRotation None/Printer's default: "" | |
*JCLPortRotation True/On: "@PJL LPORTROTATE<0A>" | |
*JCLCloseUI: *JCLPortRotation | |
*JCLOpenUI *JCLDensity/Print Darkness: PickOne | |
*DefaultJCLDensity: PrinterSetting | |
*OrderDependency: 20 JCLSetup *JCLDensity | |
*JCLDensity PrinterSetting/Printer's default: "" | |
*JCLDensity VLIGHT/Very Light (-6): "@PJL SET LDENSITY = -6<0A>" | |
*JCLDensity LIGHT/Light (-3): "@PJL SET LDENSITY = -3<0A>" | |
*JCLDensity NORMAL/Normal (0): "@PJL SET LDENSITY = 0<0A>" | |
*JCLDensity DARK/Dark (+3): "@PJL SET LDENSITY = +3<0A>" | |
*JCLDensity VDARK/Very Dark (+6): "@PJL SET LDENSITY = +6<0A>" | |
*JCLCloseUI: *JCLDensity | |
*JCLOpenUI *JCLEconomode/Toner Saver: PickOne | |
*DefaultJCLEconomode: PrinterSetting | |
*OrderDependency: 10 JCLSetup *JCLEconomode | |
*JCLEconomode PrinterSetting/Printer's default: "" | |
*JCLEconomode True/On: "@PJL SET ECONOMODE = ON<0A>" | |
*JCLEconomode False/Off: "@PJL SET ECONOMODE = OFF<0A>" | |
*JCLCloseUI: *JCLEconomode | |
*% === Resolution ============ | |
*OpenUI *Resolution/Resolution: PickOne | |
*DefaultResolution: 600dpi | |
*OrderDependency: 10 AnySetup *Resolution | |
*Resolution 300dpi/300 dpi: "1 dict dup /HWResolution [300 300] put setpagedevice" | |
*Resolution 600dpi/600 dpi: "1 dict dup /HWResolution [600 600] put setpagedevice" | |
*Resolution 1200dpi/1200 Quality: "1 dict dup /HWResolution [1200 1200] put setpagedevice" | |
*?Resolution: " | |
save | |
currentpagedevice /HWResolution get 0 get | |
( ) cvs print (dpi) = flush | |
restore | |
" | |
*End | |
*CloseUI: *Resolution | |
*OpenUI *Smoothing/Smoothing: Boolean | |
*DefaultSmoothing: False | |
*OrderDependency: 40 AnySetup *Smoothing | |
*Smoothing True/On: " | |
1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 2 put put setpagedevice" | |
*End | |
*Smoothing False/Off: " | |
1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 0 put put setpagedevice" | |
*End | |
*?Smoothing: " | |
save | |
currentpagedevice /PostRenderingEnhanceDetails get /REValue get | |
dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush | |
restore | |
" | |
*End | |
*CloseUI: *Smoothing | |
*OpenUI *ImageEnhance/Image Enhancement: Boolean | |
*DefaultImageEnhance: False | |
*OrderDependency: 40 AnySetup *ImageEnhance | |
*ImageEnhance True/On: " | |
1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 1 put put setpagedevice" | |
*End | |
*ImageEnhance False/Off: " | |
1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 0 put put setpagedevice" | |
*End | |
*CloseUI: *ImageEnhance | |
*JCLOpenUI *JCLPictureGrade/PictureGrade: PickOne | |
*DefaultJCLPictureGrade: Printer | |
*OrderDependency: 10 JCLSetup *JCLPictureGrade | |
*JCLPictureGrade Printer/Printer's default:"" | |
*JCLPictureGrade On/On: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = ON<0A>" | |
*JCLPictureGrade Off/Off: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = OFF<0A>" | |
*JCLCloseUI: *JCLPictureGrade | |
*% === Halftone Information =============== | |
*ScreenFreq: "60.0" | |
*ScreenAngle: "45.0" | |
*DefaultScreenProc: Dot | |
*ScreenProc Dot: " | |
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 | |
sub }{dup mul exch dup mul add 1 exch sub }ifelse } | |
" | |
*End | |
*ScreenProc Line: "{ pop }" | |
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" | |
*DefaultTransfer: Factory | |
*Transfer Factory: "{ }" | |
*Transfer Factory.Inverse: "{ 1 exch sub }" | |
*% === Paper Handling =================== | |
*LandscapeOrientation: Plus90 | |
*% These entries will set up the frame buffer. | |
*% Usually used with AutoSelect input slot. | |
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for | |
*% Other Envelope because C9, B5, and Other Envelope are not defined in | |
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and | |
*% dimensions are given. Translation strings give correct names. | |
*OpenUI *PageSize: PickOne | |
*OrderDependency: 30 AnySetup *PageSize | |
*DefaultPageSize: Letter | |
*PageSize Letter/Letter: " | |
2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize Legal/Legal: " | |
2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize Executive/Executive: " | |
2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize A4/A4: " | |
2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize A5/A5: " | |
2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize B5/B5: " | |
2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*% Engine value used; different from 4079P; Hp 5si | |
*PageSize A3/A3: " | |
2 dict dup /PageSize [842 1191] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize Tabloid/Tabloid: " | |
2 dict dup /PageSize [792 1224] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize Universal/Custom 11.7 x 17.7 in: " | |
2 dict dup /PageSize [842 1274] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize B4/B4: " | |
2 dict dup /PageSize [729 1032] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize Monarch/Monarch Envelope: " | |
2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize C4/C9 Envelope: " | |
2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize Comm10/C10 Envelope: " | |
2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize DL/DL Envelope: " | |
2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize C5/C5 Envelope: " | |
2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize ISOB5/B5 Envelope: " | |
2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageSize C3/Other Envelope: " | |
2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*?PageSize: " | |
save | |
17 dict | |
dup /letter (Letter) put | |
dup /legal (Legal) put | |
dup /executivepage (Executive) put | |
dup /a4 (A4) put | |
dup /a5 (A5) put | |
dup /b5 (B5) put | |
dup /a3 (A3) put | |
dup /tabloid (Tabloid) put | |
dup /oversize (Tabloid.Oversize) put | |
dup /b4 (B4) put | |
dup /3.875x7.5envelope (Monarch) put | |
dup /3.875x8.875envelope (C9) put | |
dup /4.125x9.5envelope (Comm10) put | |
dup /110x220envelope (DL) put | |
dup /162x229envelope (C5) put | |
dup /176x250envelope (Envelope.499.709) put | |
dup /otherenvelope (Envelope.612.996) put | |
statusdict /papersize get exec | |
3 1 roll {get} stopped {(Unknown)}if | |
exch not { print (.Transverse) }if | |
= flush | |
restore | |
" | |
*End | |
*CloseUI: *PageSize | |
*% These entries will set up the frame buffer. | |
*% Usually used with input slots other than AutoSelect. | |
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for | |
*% Other Envelope because C9, B5, and Other Envelope are not defined in | |
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and | |
*% dimensions are given. Translation strings give correct names. | |
*OpenUI *PageRegion: PickOne | |
*OrderDependency: 40 AnySetup *PageRegion | |
*DefaultPageRegion: Letter | |
*PageRegion Letter: " | |
2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion Legal: " | |
2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion Executive: " | |
2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion A4: " | |
2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion A5: " | |
2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion B5: " | |
2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion A3: " | |
2 dict dup /PageSize [842 1191] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion Tabloid: " | |
2 dict dup /PageSize [792 1224] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion Universal: " | |
2 dict dup /PageSize [842 1274] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion B4: " | |
2 dict dup /PageSize [729 1032] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion Monarch: " | |
2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion C4: " | |
2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion Comm10: " | |
2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion DL: " | |
2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion C5: " | |
2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion ISOB5: " | |
2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*PageRegion C3: " | |
2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" | |
*End | |
*CloseUI: *PageRegion | |
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for | |
*% Other Envelope because C9, B5, and Other Envelope are not defined in | |
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and | |
*% dimensions are given. Translation strings give correct names. | |
*DefaultImageableArea: Letter | |
*ImageableArea Letter: "12 12 600 780" | |
*ImageableArea Legal: "12 12 600 996" | |
*ImageableArea Executive: "12 12 510 744" | |
*ImageableArea A4: "7 12 585 829" | |
*ImageableArea A5: "12 12 407 583" | |
*ImageableArea B5: "12 12 505 716" | |
*ImageableArea A3: "12 12 829 1178" | |
*ImageableArea Tabloid: "12 12 780 1212" | |
*ImageableArea Universal: "12 12 830 1262" | |
*ImageableArea B4: "12 12 716 1020" | |
*ImageableArea Monarch: "1 12 267 528" | |
*ImageableArea C4: "1 12 267 626" | |
*ImageableArea Comm10: "3 12 285 672" | |
*ImageableArea DL: "2 12 299 611" | |
*ImageableArea C5: "4 12 447 636" | |
*ImageableArea ISOB5: "2 12 486 696" | |
*ImageableArea C3: "12 12 600 996" | |
*?ImageableArea: " | |
save | |
/cvp { cvi ( ) cvs print ( ) print } bind def | |
newpath clippath pathbbox | |
4 -2 roll exch 2 {ceiling cvp} repeat | |
exch 2 {floor cvp} repeat flush | |
restore | |
" | |
*End | |
*% These provide the physical dimensions of the paper (by keyword) | |
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for | |
*% Other Envelope because C9, B5, and Other Envelope are not defined in | |
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and | |
*% dimensions are given. Translation strings give correct names. | |
*DefaultPaperDimension: Letter | |
*PaperDimension Letter: "612 792" | |
*PaperDimension Legal: "612 1008" | |
*PaperDimension Executive: "522 756" | |
*PaperDimension A4: "595 842" | |
*PaperDimension A5: "420 595" | |
*PaperDimension B5: "516 729" | |
*PaperDimension A3: "842 1191" | |
*PaperDimension Tabloid: "792 1224" | |
*PaperDimension Universal: "842 1274" | |
*PaperDimension B4: "729 1032" | |
*PaperDimension Monarch: "279 540" | |
*PaperDimension C4: "279 639" | |
*PaperDimension Comm10: "297 684" | |
*PaperDimension DL: "312 624" | |
*PaperDimension C5: "459 649" | |
*PaperDimension ISOB5: "499 709" | |
*PaperDimension C3: "612 1008" | |
*RequiresPageRegion All: True | |
*% ==== Standard Input Paper Sources | |
*OpenUI *InputSlot: PickOne | |
*OrderDependency: 20 AnySetup *InputSlot | |
*DefaultInputSlot: AutoSelect | |
*InputSlot AutoSelect/Auto Select: " | |
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" | |
*End | |
*InputSlot Tray1/Upper (Tray 1): " | |
1 dict dup /MediaPosition null put setpagedevice | |
currentpagedevice /InputAttributes get 0 get setpagedevice | |
1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice | |
1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
*End | |
*InputSlot Tray2/Lower (Tray 2): " | |
1 dict dup /MediaPosition null put setpagedevice | |
currentpagedevice /InputAttributes get 1 get setpagedevice | |
1 dict dup /InputAttributes 1 dict dup /Priority [1] put put setpagedevice | |
1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
*End | |
*InputSlot MultiPurpose/Multipurpose Tray: " | |
1 dict dup /MediaPosition null put setpagedevice | |
currentpagedevice /InputAttributes get 2 get setpagedevice | |
1 dict dup /InputAttributes 1 dict dup /Priority [2] put put setpagedevice | |
1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
*End | |
*% ==== Optional Input Sources ==== | |
*% If not installed select upper tray instead. | |
*InputSlot Tray3/Input Drawer (Tray 3): " | |
1 dict dup /MediaPosition null put setpagedevice | |
userdict /lms | |
currentpagedevice /InputAttributes get 3 known { 3 }{ 0 }ifelse put | |
currentpagedevice /InputAttributes get lms get setpagedevice | |
1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice | |
1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
*End | |
*% If the Envelope Feeder is not installed then do a manual Feed | |
*InputSlot Feeder/Envelope Feeder: " | |
1 dict dup /MediaPosition null put setpagedevice | |
currentpagedevice /InputAttributes get 4 known | |
{ 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice | |
1 dict dup/InputAttributes 1 dict dup /Priority [4] put put setpagedevice } | |
{ 1 dict dup /ManualFeed true put setpagedevice }ifelse" | |
*End | |
*InputSlot ManualPaper/Manual Paper: " | |
1 dict dup /ManualFeed true put setpagedevice | |
1 dict dup /MediaPosition null put setpagedevice | |
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" | |
*End | |
*InputSlot ManualEnvelope/Manual Envelope: " | |
1 dict dup /ManualFeed true put setpagedevice | |
1 dict dup /MediaPosition null put setpagedevice | |
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" | |
*End | |
*?InputSlot: " | |
save | |
[ (Upper) (Lower) (Multipurpose) (Manual) (Manual Envelope) (Tray3) (Feeder) ] | |
statusdict /papertray get exec | |
{get exec} stopped { pop pop (Unknown) } if = flush | |
restore | |
" | |
*End | |
*CloseUI: *InputSlot | |
*% *OpenUI *ManualFeed/Manual Paper: Boolean | |
*% *OrderDependency: 15 AnySetup *ManualFeed | |
*% *DefaultManualFeed: False | |
*% *ManualFeed True: "1 dict dup /ManualFeed true put setpagedevice" | |
*% *ManualFeed False: "1 dict dup /ManualFeed false put setpagedevice" | |
*% *?ManualFeed: " | |
*% save | |
*% currentpagedevice /ManualFeed get {(True)}{(False)}ifelse = flush | |
*% restore | |
*% " | |
*% *End | |
*% *CloseUI: *ManualFeed | |
*OpenUI *TraySwitch/Tray Linking: PickOne | |
*OrderDependency: 50 AnySetup *TraySwitch | |
*DefaultTraySwitch: Off | |
*TraySwitch False/No Tray Linking: " | |
1 dict dup /TraySwitch false put setpagedevice" | |
*End | |
*TraySwitch Tray12/Link Tray 1+2: " | |
1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 1 put put setpagedevice | |
1 dict dup /TraySwitch true put setpagedevice" | |
*End | |
*TraySwitch Tray123/Link Tray 1+2+3: " | |
1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 2 put put setpagedevice | |
1 dict dup /TraySwitch true put setpagedevice" | |
*End | |
*TraySwitch Tray23/Link Tray 2+3: " | |
1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 3 put put setpagedevice | |
1 dict dup /TraySwitch true put setpagedevice" | |
*End | |
*?TraySwitch: " | |
save | |
currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush | |
restore | |
" | |
*End | |
*CloseUI: *TraySwitch | |
*DefaultOutputOrder: Normal | |
*OutputOrder Normal: "" | |
*OutputOrder Reverse: "" | |
*% ==== Duplex Printing Selection ==== | |
*OpenUI *Duplex/Duplex: PickOne | |
*DefaultDuplex: None | |
*Duplex None/Simplex: "1 dict dup /Duplex false put setpagedevice" | |
*Duplex DuplexNoTumble/Duplex - Long Edge: " | |
statusdict /duplexer get exec | |
{ 2 dict dup /Duplex true put dup /Tumble false put setpagedevice } | |
{ 1 dict dup /Duplex false put setpagedevice } | |
ifelse | |
" | |
*End | |
*Duplex DuplexTumble/Duplex - Short Edge: " | |
statusdict /duplexer get exec | |
{ 2 dict dup /Duplex true put dup /Tumble true put setpagedevice } | |
{ 1 dict dup /Duplex false put setpagedevice } | |
ifelse | |
" | |
*End | |
*?Duplex: " | |
save | |
currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush | |
restore | |
" | |
*End | |
*CloseUI: *Duplex | |
*% ==== Collated Copies ==== | |
*OpenUI *LXCollate/Collate Copies: Boolean | |
*DefaultLXCollate: False | |
*OrderDependency: 44 AnySetup *LXCollate | |
*LXCollate True/On: "1 dict dup /Collate true put setpagedevice" | |
*LXCollate False/Off: "1 dict dup /Collate false put setpagedevice" | |
*CloseUI: *LXCollate | |
*% ==== Output Finisher ==== | |
*OpenUI *OutputBin/Output Bin: PickOne | |
*DefaultOutputBin: Bin0 | |
*OrderDependency: 45 AnySetup *OutputBin | |
*OutputBin Bin0/Bin 0 (Top):" | |
1 dict dup /OutputAttributes 1 dict dup /Priority [0] put put setpagedevice" | |
*End | |
*OutputBin Bin1/Bin 1 (Side):" | |
1 dict dup /OutputAttributes 1 dict dup /Priority [1] put put setpagedevice" | |
*End | |
*CloseUI: *OutputBin | |
*OpenUI *StapleLocation/Staple: PickOne | |
*DefaultStapleLocation: Off | |
*OrderDependency: 170 AnySetup *StapleLocation | |
*StapleLocation Off/Off: " | |
1 dict dup /Staple 0 put setpagedevice" | |
*End | |
*StapleLocation Staple1/Staple 1: " | |
2 dict dup /Staple 3 put dup /StapleDetails 2 dict dup /Type 93 put dup | |
/Number 1 put put setpagedevice" | |
*End | |
*StapleLocation Staple2/Staple 2: " | |
2 dict dup /Staple 3 put dup /StapleDetails 2 dict dup /Type 93 put dup | |
/Number 2 put put setpagedevice" | |
*End | |
*CloseUI: *StapleLocation | |
*CloseGroup: FinisherOptions | |
*% === Font Information ========================================== | |
*DefaultFont: Courier | |
*Font Courier: Standard "(001.000)" Standard ROM | |
*Font Courier-Bold: Standard "(001.000)" Standard ROM | |
*Font Courier-Oblique: Standard "(001.000)" Standard ROM | |
*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM | |
*Font Times-Roman: Standard "(001.000)" Standard ROM | |
*Font Times-Bold: Standard "(001.000)" Standard ROM | |
*Font Times-Italic: Standard "(001.000)" Standard ROM | |
*Font Times-BoldItalic: Standard "(001.000)" Standard ROM | |
*Font Helvetica: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Bold: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM | |
*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM | |
*Font Symbol: Special "(001.000)" Standard ROM | |
*Font AvantGarde-Book: Standard "(001.000)" Standard ROM | |
*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM | |
*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM | |
*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM | |
*Font Bookman-Demi: Standard "(001.000)" Standard ROM | |
*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM | |
*Font Bookman-Light: Standard "(001.000)" Standard ROM | |
*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Light: Standard "(001.000)" Standard ROM | |
*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM | |
*Font Helvetica-Black: Standard "(001.000)" Standard ROM | |
*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM | |
*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM | |
*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM | |
*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM | |
*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM | |
*Font Palatino-Roman: Standard "(001.000)" Standard ROM | |
*Font Palatino-Bold: Standard "(001.000)" Standard ROM | |
*Font Palatino-Italic: Standard "(001.000)" Standard ROM | |
*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM | |
*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM | |
*Font ZapfDingbats: Special "(001.000)" Special ROM | |
*?FontQuery: " | |
save | |
4 dict begin | |
/sv exch def | |
/str (fonts/ ) def | |
/st2 128 string def | |
{ count 0 gt | |
{ dup st2 cvs (/) print print (:) print dup FontDirectory exch known | |
{pop (Yes)} | |
{ str exch st2 cvs dup length /len exch def | |
6 exch putinterval str 0 len 6 add getinterval mark exch | |
{ } st2 filenameforall counttomark 0 gt | |
{ cleartomark (Yes)}{cleartomark (No)}ifelse | |
}ifelse = flush | |
}{ exit } ifelse | |
} bind loop | |
(*) = flush | |
sv | |
end | |
restore | |
" | |
*End | |
*?FontList: " | |
save | |
2 dict begin | |
/sv exch def | |
/str 128 string def | |
FontDirectory { pop == } bind forall flush | |
/filenameforall where | |
{ pop save (fonts/*) | |
{ dup length 6 sub 6 exch getinterval cvn == } bind | |
str filenameforall flush restore | |
} if | |
(*) = flush | |
sv | |
end | |
restore | |
" | |
*End | |
*% Printer Messages (verbatim from printer): | |
*Message: "%% exitserver: permanent state may be changed %%" | |
*Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%" | |
*Message: "\FontName\ not found, using Courier" | |
*% Status (format: %% status: <one of these> %% ) | |
*Status: "Printer Busy" | |
*Status: "Warming Up" | |
*Status: "idle" | |
*Status: "busy" | |
*Status: "waiting" | |
*Status: "initializing" | |
*Status: "not ready" | |
*% Input Sources (format: %% status: <stat>; source: <one of these> %% ) | |
*Source: "Serial" | |
*Source: "Parallel" | |
*Source: "Network" | |
*% Printer Error (format: %% PrinterError: <one of these> %%) | |
*PrinterError: "Paper Jam" | |
*PrinterError: "Wrong Paper Length" | |
*PrinterError: "Invalid Manual Insertion" | |
*PrinterError: "Change Size in Feeder" | |
*PrinterError: "Change Size in Tray 1" | |
*PrinterError: "Change Size in Tray 2" | |
*PrinterError: "Paper Out or Feed Failure - Feed" | |
*PrinterError: "Load Manual Envelope" | |
*PrinterError: "Paper Out or Feed Failure - Tray 1" | |
*PrinterError: "Paper Out or Feed Failure - Tray 2" | |
*PrinterError: "Load Manual Paper" | |
*PrinterError: "Output Bin Full" | |
*PrinterError: "Cover Open/Cartridge Not Installed" | |
*PrinterError: "Insufficient Memory" | |
*PrinterError: "Complex Page" | |
*PrinterError: "Default Storage Error" | |
*PrinterError: "Defective Font Card Installed" | |
*PrinterError: "Flash Full" | |
*PrinterError: "ioerror" | |
*PrinterError: "Flash Error" | |
*PrinterError: "Duplex Not Attached" | |
*PrinterError: "Duplex Cover Open" | |
*PrinterError: "Scheduled Maintenance" | |
*PrinterError: "Toner Low" | |
*PrinterError: "Service Error" | |
*%DeviceAdjustMatrix: " 1 0 0 1 0 0 " | |
*% === Color Separation Information ===================== | |
*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi | |
*InkName: ProcessBlack/Process Black | |
*InkName: CustomColor/Custom Color | |
*InkName: ProcessCyan/Process Cyan | |
*InkName: ProcessMagenta/Process Magenta | |
*InkName: ProcessYellow/Process Yellow | |
*% For 60 lpi / 300 dpi =============================== | |
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" | |
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" | |
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" | |
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" | |
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" | |
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*% For 53 lpi / 300 dpi =============================== | |
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" | |
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" | |
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" | |
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" | |
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" | |
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" | |
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" | |
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" | |
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" | |
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" | |
*% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) ===================== | |
*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0" | |
*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0" | |
*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651" | |
*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349" | |
*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0" | |
*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" | |
*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" | |
*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" | |
*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" | |
*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0" | |
*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: " | |
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch | |
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch | |
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 | |
sub }{dup mul exch dup mul add 1 exch sub }ifelse } | |
" | |
*End | |
*% For 71 lpi / 600 dpi =============================== | |
*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0" | |
*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0" | |
*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651" | |
*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349" | |
*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0" | |
*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" | |
*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" | |
*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" | |
*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" | |
*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667" | |
*% For 106 lpi / 1200 dpi =================================================== | |
*ColorSepScreenAngle ProcessBlack.106lpi.1200dpi/106 lpi / 1200 dpi: "45.0" | |
*ColorSepScreenAngle CustomColor.106lpi.1200dpi/106 lpi / 1200 dpi: "45.0" | |
*ColorSepScreenAngle ProcessCyan.106lpi.1200dpi/106 lpi / 1200 dpi: "71.5651" | |
*ColorSepScreenAngle ProcessMagenta.106lpi.1200dpi/106 lpi / 1200 dpi: "18.4349" | |
*ColorSepScreenAngle ProcessYellow.106lpi.1200dpi/106 lpi / 1200 dpi: "0.0" | |
*ColorSepScreenFreq ProcessBlack.106lpi.1200dpi/106 lpi / 1200 dpi: "106.066" | |
*ColorSepScreenFreq CustomColor.106lpi.1200dpi/106 lpi / 1200 dpi: "106.066" | |
*ColorSepScreenFreq ProcessCyan.106lpi.1200dpi/106 lpi / 1200 dpi: "94.8683" | |
*ColorSepScreenFreq ProcessMagenta.106lpi.1200dpi/106 lpi / 1200 dpi: "94.8683" | |
*ColorSepScreenFreq ProcessYellow.106lpi.1200dpi/106 lpi / 1200 dpi: "100.0" | |
*% For 116 lpi / 1200 dpi =================================================== | |
*ColorSepScreenAngle ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0" | |
*ColorSepScreenAngle CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0" | |
*ColorSepScreenAngle ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "71.5651" | |
*ColorSepScreenAngle ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "18.4349" | |
*ColorSepScreenAngle ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "0.0" | |
*ColorSepScreenFreq ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066" | |
*ColorSepScreenFreq CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066" | |
*ColorSepScreenFreq ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683" | |
*ColorSepScreenFreq ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683" | |
*ColorSepScreenFreq ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "100.0" | |
*% End of PPD file for Lexmark Optra Laser Printer |