| *PPD-Adobe: "4.1" | |
| *% Adobe PostScript(R) Printer Description File | |
| *% For Lexmark Optra C LaserPrinter | |
| *% Produced by Lexmark International, Inc. | |
| *% | |
| *% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved. | |
| *% Permission is granted for redistribution of this file as | |
| *% long as this copyright notice is intact and the content | |
| *% of the file is not altered in any way from its original form. | |
| *% | |
| *% | |
| *% WARNING: If you want to edit this PPD file and use it with Aldus | |
| *% PageMaker, be sure to use an editor (such as DOS Edit) | |
| *% that does NOT add an end-of-file marker (hex 1A) when | |
| *% it stores the file. | |
| *% | |
| *% | |
| *FormatVersion: "4.1" | |
| *FileVersion: "1.1" | |
| *LanguageVersion: English | |
| *PCFileName: "LOPTRAC.PPD" | |
| *Product: "(Lexmark Optra C)" | |
| *PSVersion: "(2014)" | |
| *ModelName: "Lexmark Optra C" | |
| *ShortNickName: "Lexmark Optra C PS" | |
| *NickName: "Lexmark Optra C PS" | |
| *% === Options and Constraints ============ | |
| *OpenGroup: InstallableOptions/Options Installed | |
| *OpenUI *Option1/Lower Tray - Option: Boolean | |
| *DefaultOption1: False | |
| *Option1 True/Installed: "" | |
| *Option1 False/Not Installed: "" | |
| *CloseUI: *Option1 | |
| *OpenUI *Option2/Flash Memory Card - Option: Boolean | |
| *DefaultOption2: False | |
| *Option2 True/Installed: "" | |
| *Option2 False/Not Installed: "" | |
| *CloseUI: *Option2 | |
| *OpenUI *Option3/Printer Hard Disk - Option: Boolean | |
| *DefaultOption3: False | |
| *Option3 False/Not Installed: "" | |
| *Option3 True/Installed: "" | |
| *CloseUI: *Option3 | |
| *OpenUI *Option4/Printer Memory - Option: PickOne | |
| *DefaultOption4: 8Meg | |
| *Option4 2Meg/2 MB Printer Memory: "" | |
| *Option4 4Meg/4 MB Printer Memory: "" | |
| *Option4 6Meg/6 MB Printer Memory: "" | |
| *Option4 8Meg/8 MB Printer Memory: "" | |
| *Option4 10Meg/10 MB Printer Memory: "" | |
| *Option4 12Meg/12 MB Printer Memory: "" | |
| *Option4 16Meg/16 MB Printer Memory: "" | |
| *Option4 18Meg/18 MB Printer Memory: "" | |
| *Option4 20Meg/20 MB Printer Memory: "" | |
| *Option4 24Meg/24 MB Printer Memory: "" | |
| *Option4 32Meg/32 or more MB Printer Memory: "" | |
| *CloseUI: *Option4 | |
| *CloseGroup: InstallableOptions | |
| *UIConstraints: *Option1 False *InputSlot Lower | |
| *UIConstraints: *Option1 False *TraySwitch True | |
| *% === Basic Capabilities ============ | |
| *ColorDevice: True | |
| *LanguageLevel: "2" | |
| *Protocols: PJL | |
| *TTRasterizer: Type42 | |
| *FreeVM: "1290000" | |
| *VMOption 2Meg: "376000" | |
| *VMOption 4Meg: "728000" | |
| *VMOption 6Meg: "828000" | |
| *VMOption 8Meg: "1290000" | |
| *VMOption 10Meg: "1290000" | |
| *VMOption 12Meg: "1546000" | |
| *VMOption 16Meg: "2058000" | |
| *VMOption 18Meg: "2058000" | |
| *VMOption 20Meg: "2058000" | |
| *VMOption 24Meg: "2058000" | |
| *VMOption 32Meg: "2058000" | |
| *ColorDevice: True | |
| *DefaultColorSpace: CMYK | |
| *Throughput: "3" | |
| *Password: "0" | |
| *ExitServer: " | |
| count 0 eq % is the password on the stack? | |
| { true } | |
| { dup % potential password | |
| statusdict /checkpassword get exec not | |
| } ifelse | |
| { % if no password or not valid | |
| (WARNING : Cannot perform the exitserver command.) = | |
| (Password supplied is not valid.) = | |
| (Please contact the author of this software.) = flush | |
| quit | |
| } if | |
| serverdict /exitserver get exec | |
| " | |
| *End | |
| *Reset: " | |
| count 0 eq % is the password on the stack? | |
| { true } | |
| { dup % potential password | |
| statusdict /checkpassword get exec not | |
| } ifelse | |
| { % if no password or not valid | |
| (WARNING : Cannot reset printer.) = | |
| (Password supplied is not valid.) = | |
| (Please contact the author of this software.) = flush | |
| quit | |
| } if | |
| serverdict /exitserver get exec | |
| systemdict /quit get exec | |
| (WARNING : Printer Reset Failed.) = flush | |
| " | |
| *End | |
| *% === Job Control Language == | |
| *JCLBegin: "<1B>%-12345X@PJL JOB<0A>" | |
| *JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>" | |
| *JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X" | |
| *JCLOpenUI *JCLPortRotation/Port Rotation: PickOne | |
| *DefaultJCLPortRotation: None | |
| *OrderDependency: 10 JCLSetup *JCLPortRotation | |
| *JCLPortRotation None/Printer Setting: "" | |
| *JCLPortRotation True/On: "@PJL LPORTROTATE<0A>" | |
| *JCLCloseUI: *JCLPortRotation | |
| *% === Resolution ============ | |
| *OpenUI *Resolution/Resolution: PickOne | |
| *DefaultResolution: 600dpi | |
| *OrderDependency: 10 AnySetup *Resolution | |
| *Resolution 600dpi/600 dpi: "" | |
| *?Resolution: " | |
| save | |
| currentpagedevice /HWResolution get 0 get | |
| ( ) cvs print (dpi) = flush | |
| restore | |
| " | |
| *End | |
| *CloseUI: *Resolution | |
| *% === Halftone Information =============== | |
| *ScreenFreq: "53.0" | |
| *ScreenAngle: "45.0" | |
| *DefaultScreenProc: Dot | |
| *ScreenProc Dot: " | |
| {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 | |
| sub }{dup mul exch dup mul add 1 exch sub }ifelse } | |
| " | |
| *End | |
| *ScreenProc Line: "{ pop }" | |
| *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" | |
| *DefaultTransfer: Factory | |
| *Transfer Factory: "{ }" | |
| *Transfer Factory.Inverse: "{ 1 exch sub }" | |
| *OpenUI *ColorCorrection/Color Correction: PickOne | |
| *OrderDependency: 10 AnySetup *ColorCorrection | |
| *DefaultColorCorrection: Off | |
| *ColorCorrection False/Off: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection null put put setpagedevice" | |
| *ColorCorrection Display/Display: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /Display put put setpagedevice" | |
| *ColorCorrection Vivid/Vivid: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /Vivid put put setpagedevice" | |
| *ColorCorrection SWOP/SWOP: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /SWOP put put setpagedevice" | |
| *?ColorCorrection: " | |
| save statusdict begin | |
| [(Off) (Display) (Vivid) (SWOP)] | |
| colorcorrection 1 sub get = flush | |
| end | |
| restore" | |
| *End | |
| *CloseUI: *ColorCorrection | |
| *OpenUI *ColorRegistration/Color Registration: PickOne | |
| *OrderDependency: 10 AnySetup *ColorRegistration | |
| *DefaultColorRegistration: 4Cycle | |
| *ColorRegistration 4Cycle/High Speed: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorRegistration 0 put put setpagedevice" | |
| *ColorRegistration 5Cycle/High Quality: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorRegistration 1 put put setpagedevice" | |
| *?ColorRegistration: " | |
| save statusdict begin | |
| [(4Cycle) (5Cycle)] | |
| colorregistration 1 sub get = flush | |
| end | |
| restore" | |
| *End | |
| *CloseUI: *ColorRegistration | |
| *OpenUI *FinishQuality/Finish Quality: PickOne | |
| *OrderDependency: 10 AnySetup *FinishQuality | |
| *DefaultFinishQuality: Medium | |
| *FinishQuality Medium/Medium Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 0 put put setpagedevice" | |
| *FinishQuality High/High Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 1 put put setpagedevice" | |
| *FinishQuality Low/Low Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 2 put put setpagedevice" | |
| *?FinishQuality: " | |
| save statusdict begin | |
| [(medium) (high) (low)] finishquality get = flush | |
| end | |
| restore" | |
| *End | |
| *CloseUI: *FinishQuality | |
| *OpenUI *Screening/Screening: PickOne | |
| *OrderDependency: 10 AnySetup *Screening | |
| *DefaultScreening: ColorGrade | |
| *Screening ColorGrade/ColorGrade: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /ColorGrade put put setpagedevice" | |
| *Screening Contone/Contone: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /Contone put put setpagedevice" | |
| *Screening Stochastic/Stochastic: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /Stochastic put put setpagedevice" | |
| *?Screening: " | |
| save statusdict begin | |
| [(ColorGrade) (Contone) (Stochastic)] screening 1 sub get = flush | |
| end | |
| restore" | |
| *End | |
| *CloseUI: *Screening | |
| *% === Paper Handling =================== | |
| *LandscapeOrientation: Plus90 | |
| *% These entries will set up the frame buffer. | |
| *% Usually used with AutoSelect input slot. | |
| *OpenUI *PageSize: PickOne | |
| *OrderDependency: 30 AnySetup *PageSize | |
| *DefaultPageSize: Letter | |
| *PageSize Letter/Letter: " | |
| 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *PageSize Legal/Legal: " | |
| 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *PageSize A4/A4: " | |
| 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *PageSize B5/B5: " | |
| 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *?PageSize: " | |
| save | |
| 4 dict | |
| dup /letter (Letter) put | |
| dup /legal (Legal) put | |
| dup /a4 (A4) put | |
| dup /b5 (B5) put | |
| statusdict /papersize get exec | |
| 3 1 roll {get} stopped {(Unknown)}if | |
| exch not { print (.Transverse) }if | |
| = flush | |
| restore | |
| " | |
| *End | |
| *CloseUI: *PageSize | |
| *% These entries will set up the frame buffer. | |
| *% Usually used with input slots other than AutoSelect. | |
| *OpenUI *PageRegion: PickOne | |
| *OrderDependency: 40 AnySetup *PageRegion | |
| *DefaultPageRegion: Letter | |
| *PageRegion Letter/Letter: " | |
| 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *PageRegion Legal/Legal: " | |
| 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *PageRegion A4/A4: " | |
| 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *PageRegion B5/B5: " | |
| 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" | |
| *End | |
| *CloseUI: *PageRegion | |
| *DefaultImageableArea: Letter | |
| *ImageableArea Letter: "8 14 602 763" | |
| *ImageableArea Legal: "8 14 602 979" | |
| *ImageableArea A4: "8 14 586 813" | |
| *ImageableArea B5: "8 14 506 699" | |
| *?ImageableArea: " | |
| save | |
| /cvp { cvi ( ) cvs print ( ) print } bind def | |
| newpath clippath pathbbox | |
| 4 -2 roll exch 2 {ceiling cvp} repeat | |
| exch 2 {floor cvp} repeat flush | |
| restore | |
| " | |
| *End | |
| *% These provide the physical dimensions of the paper (by keyword) | |
| *DefaultPaperDimension: Letter | |
| *PaperDimension Letter: "612 792" | |
| *PaperDimension Legal: "612 1008" | |
| *PaperDimension A4: "595 842" | |
| *PaperDimension B5: "516 729" | |
| *RequiresPageRegion All: True | |
| *OpenUI *InputSlot: PickOne | |
| *OrderDependency: 20 AnySetup *InputSlot | |
| *DefaultInputSlot: AutoSelect | |
| *InputSlot AutoSelect/Auto Select: " | |
| 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" | |
| *End | |
| *InputSlot Upper/Upper Tray: " | |
| 1 dict dup /MediaPosition null put setpagedevice | |
| currentpagedevice /InputAttributes get 0 get setpagedevice | |
| 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice | |
| 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
| *End | |
| *InputSlot Lower/Lower Tray: " | |
| 1 dict dup /MediaPosition null put setpagedevice | |
| userdict /lms | |
| currentpagedevice /InputAttributes get 1 known { 1 }{ 0 }ifelse put | |
| currentpagedevice /InputAttributes get lms get setpagedevice | |
| 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice | |
| 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
| *End | |
| *InputSlot Feeder/Multipurpose Feeder: " | |
| 1 dict dup /MediaPosition null put setpagedevice | |
| currentpagedevice /InputAttributes get 2 get setpagedevice | |
| 1 dict dup /InputAttributes 1 dict dup /Priority [2] put put setpagedevice | |
| 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" | |
| *End | |
| *?InputSlot: " | |
| save | |
| [ (Upper) (Lower) (Feeder) ] | |
| statusdict /papertray get exec {get exec} stopped { pop pop (Unknown) } | |
| if = flush | |
| restore | |
| " | |
| *End | |
| *CloseUI: *InputSlot | |
| *OpenUI *TraySwitch/Tray Linking: Boolean | |
| *OrderDependency: 50 AnySetup *TraySwitch | |
| *DefaultTraySwitch: False | |
| *TraySwitch True/On: "1 dict dup /TraySwitch true put setpagedevice" | |
| *TraySwitch False/Off: "1 dict dup /TraySwitch false put setpagedevice" | |
| *?TraySwitch: " | |
| save | |
| currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush | |
| restore | |
| " | |
| *End | |
| *CloseUI: *TraySwitch | |
| *DefaultOutputOrder: Normal | |
| *OutputOrder Normal: "" | |
| *OutputOrder Reverse: "" | |
| *OpenUI *LXCollate/Collate Copies: Boolean | |
| *DefaultLXCollate: False | |
| *OrderDependency: 44 AnySetup *LXCollate | |
| *LXCollate True/On: "1 dict dup /Collate true put setpagedevice" | |
| *LXCollate False/Off: "1 dict dup /Collate false put setpagedevice" | |
| *CloseUI: *LXCollate | |
| *% === Font Information ========================================== | |
| *DefaultFont: Courier | |
| *Font Courier: Standard "(001.000)" Standard ROM | |
| *Font Courier-Bold: Standard "(001.000)" Standard ROM | |
| *Font Courier-Oblique: Standard "(001.000)" Standard ROM | |
| *Font Courier-BoldOblique: Standard "(001.000)" Standard ROM | |
| *Font Times-Roman: Standard "(001.000)" Standard ROM | |
| *Font Times-Bold: Standard "(001.000)" Standard ROM | |
| *Font Times-Italic: Standard "(001.000)" Standard ROM | |
| *Font Times-BoldItalic: Standard "(001.000)" Standard ROM | |
| *Font Helvetica: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Bold: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Oblique: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Narrow: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM | |
| *Font Symbol: Special "(001.000)" Standard ROM | |
| *Font AvantGarde-Book: Standard "(001.000)" Standard ROM | |
| *Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM | |
| *Font AvantGarde-Demi: Standard "(001.000)" Standard ROM | |
| *Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM | |
| *Font Bookman-Demi: Standard "(001.000)" Standard ROM | |
| *Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM | |
| *Font Bookman-Light: Standard "(001.000)" Standard ROM | |
| *Font Bookman-LightItalic: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Light: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-Black: Standard "(001.000)" Standard ROM | |
| *Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM | |
| *Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM | |
| *Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM | |
| *Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM | |
| *Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM | |
| *Font Palatino-Roman: Standard "(001.000)" Standard ROM | |
| *Font Palatino-Bold: Standard "(001.000)" Standard ROM | |
| *Font Palatino-Italic: Standard "(001.000)" Standard ROM | |
| *Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM | |
| *Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM | |
| *Font ZapfDingbats: Special "(001.000)" Special ROM | |
| *?FontQuery: " | |
| save | |
| 4 dict begin | |
| /sv exch def | |
| /str (fonts/ ) def | |
| /st2 128 string def | |
| { count 0 gt | |
| { dup st2 cvs (/) print print (:) print dup FontDirectory exch known | |
| {pop (Yes)} | |
| { str exch st2 cvs dup length /len exch def | |
| 6 exch putinterval str 0 len 6 add getinterval mark exch | |
| { } st2 filenameforall counttomark 0 gt | |
| { cleartomark (Yes)}{cleartomark (No)}ifelse | |
| }ifelse = flush | |
| }{ exit } ifelse | |
| } bind loop | |
| (*) = flush | |
| sv | |
| end | |
| restore | |
| " | |
| *End | |
| *?FontList: " | |
| save | |
| 2 dict begin | |
| /sv exch def | |
| /str 128 string def | |
| FontDirectory { pop == } bind forall flush | |
| /filenameforall where | |
| { pop save (fonts/*) | |
| { dup length 6 sub 6 exch getinterval cvn == } bind | |
| str filenameforall flush restore | |
| } if | |
| (*) = flush | |
| sv | |
| end | |
| restore | |
| " | |
| *End | |
| *% Printer Messages (verbatim from printer): | |
| *Message: "%% exitserver: permanent state may be changed %%" | |
| *Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%" | |
| *Message: "\FontName\ not found, using Courier" | |
| *% Status (format: %% status: <one of these> %% ) | |
| *Status: "Printer Busy" | |
| *Status: "Warming Up" | |
| *Status: "idle" | |
| *Status: "busy" | |
| *Status: "waiting" | |
| *Status: "initializing" | |
| *Status: "not ready" | |
| *% Input Sources (format: %% status: <stat>; source: <one of these> %% ) | |
| *Source: "Serial" | |
| *Source: "Parallel" | |
| *Source: "Network" | |
| *% Printer Error (format: %% PrinterError: <one of these> %%) | |
| *PrinterError: "Paper Jam" | |
| *PrinterError: "Wrong Paper Length" | |
| *PrinterError: "Invalid Manual Insertion" | |
| *PrinterError: "Change Size in Feeder" | |
| *PrinterError: "Change Size in Tray 1" | |
| *PrinterError: "Change Size in Tray 2" | |
| *PrinterError: "Paper Out or Feed Failure - Feed" | |
| *PrinterError: "Load Manual Envelope" | |
| *PrinterError: "Paper Out or Feed Failure - Tray 1" | |
| *PrinterError: "Paper Out or Feed Failure - Tray 2" | |
| *PrinterError: "Load Manual Paper" | |
| *PrinterError: "Output Bin Full" | |
| *PrinterError: "Cover Open/Cartridge Not Installed" | |
| *PrinterError: "Insufficient Memory" | |
| *PrinterError: "Complex Page" | |
| *PrinterError: "Default Storage Error" | |
| *PrinterError: "Defective Font Card Installed" | |
| *PrinterError: "Flash Full" | |
| *PrinterError: "ioerror" | |
| *PrinterError: "Flash Error" | |
| *PrinterError: "Duplex Not Attached" | |
| *PrinterError: "Duplex Cover Open" | |
| *PrinterError: "Scheduled Maintenance" | |
| *PrinterError: "Toner Low" | |
| *PrinterError: "Service Error" | |
| *%DeviceAdjustMatrix: " 1 0 0 1 0 0 " | |
| *% === Color Separation Information ===================== | |
| *DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi | |
| *InkName: ProcessBlack/Process Black | |
| *InkName: CustomColor/Custom Color | |
| *InkName: ProcessCyan/Process Cyan | |
| *InkName: ProcessMagenta/Process Magenta | |
| *InkName: ProcessYellow/Process Yellow | |
| *% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) ===================== | |
| *ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0" | |
| *ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0" | |
| *ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651" | |
| *ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349" | |
| *ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0" | |
| *ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" | |
| *ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" | |
| *ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" | |
| *ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" | |
| *ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0" | |
| *ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: " | |
| {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch | |
| 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch | |
| abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 | |
| sub }{dup mul exch dup mul add 1 exch sub }ifelse } | |
| " | |
| *End | |
| *% For 71 lpi / 600 dpi =============================== | |
| *ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0" | |
| *ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0" | |
| *ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651" | |
| *ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349" | |
| *ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0" | |
| *ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" | |
| *ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" | |
| *ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" | |
| *ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" | |
| *ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667" | |
| *% End of PPD file for Lexmark Optra C LaserPrinter |