AOO410/main/offapi/com/sun/star/drawing/EnhancedCustomShapeExtrusion.idl

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/


#ifndef __com_sun_star_drawing_EnhancedCustomShapeExtrusion_idl__
#define __com_sun_star_drawing_EnhancedCustomShapeExtrusion_idl__

#ifndef __com_sun_star_awt_Size_idl__ 
#include <com/sun/star/awt/Size.idl>
#endif
#ifndef __com_sun_star_awt_Point_idl__ 
#include <com/sun/star/awt/Point.idl>
#endif
#ifndef __com_sun_star_beans_PropertyValue_idl__
#include <com/sun/star/beans/PropertyValue.idl>
#endif
#ifndef __com_sun_star_drawing_Position3D_idl__ 
#include <com/sun/star/drawing/Position3D.idl>
#endif
#ifndef __com_sun_star_drawing_Direction3D_idl__ 
#include <com/sun/star/drawing/Direction3D.idl>
#endif
#ifndef __com_sun_star_drawing_ProjectionMode_idl__ 
#include <com/sun/star/drawing/ProjectionMode.idl>
#endif
#ifndef __com_sun_star_drawing_ShadeMode_idl__ 
#include <com/sun/star/drawing/ShadeMode.idl>
#endif
#ifndef __com_sun_star_drawing_EnhancedCustomShapeParameterPair_idl__
#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.idl>
#endif

//=============================================================================

module com { module sun { module star { module drawing { 

//=============================================================================
/**
  This service may be represented by a ::com::sun::star::beans::PropertyValue [].
*/

service EnhancedCustomShapeExtrusion
{
	/** This property specifies if extrusion is displayed. The default for this property
		is "false"
	*/
	[optional, property] boolean Extrusion;

	/** This attribute specifies the brightness of a scene in percent.
	*/
	[optional, property] double Brightness;

	/** The first value of EnhancedCustomShapeParameterPair specifies the depth of the
		extrusion in 1/100 mm. The second value (0.0 to 1.0) specifies the fraction of
		the extrusion that lies before the shape, a value of 0 is default.
	*/
	[optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Depth;

	/** This attribute specifies the amount of diffusion reflected by the shape
        in percent
	*/
	[optional, property] double Diffusion;

	/** Specifies the number of line segments that should be used to display curved surfaces.
		The higher the number the more line segments are used.
	*/
	[optional, property] long NumberOfLineSegments;

	/** Specifies if the front face of the extrusion responds to lightning changes.
	*/
	[optional, property] boolean LightFace;

	/** Specifies if the primary light is harsh.
	*/
	[optional, property] boolean FirstLightHarsh;

	/** Specifies if the secondary light is harsh.
	*/
	[optional, property] boolean SecondLightHarsh;

	/** Specifies the intensity for the first light in percent.
	*/
	[optional, property] double FirstLightLevel;

	/** Specifies the intensity for the second light in percent.
	*/
	[optional, property] double SecondLightLevel;

	/** Specifies the direction of the first light.
	*/
	[optional, property] ::com::sun::star::drawing::Direction3D FirstLightDirection;

	/** Specifies the direction of the second light.
	*/
	[optional, property] ::com::sun::star::drawing::Direction3D SecondLightDirection;

	/** Specifies if the surface of the extrusion object looks like metal.
	*/
	[optional, property] boolean Metal;

	/** This property defines the shade mode.
	*/
	[optional, property] ::com::sun::star::drawing::ShadeMode ShadeMode;
	
	/**	This attributes specifies the rotation angle about the x-axis in grad. 
	    The order of rotation is: z-axis, y-axis and then x-axis. The z-axis is 
		specified by the draw:rotate-angle.
	*/
	[optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair RotateAngle;

	/** This attribute specifies the position of the rotate center 
	    in terms of shape size fractions, if the property is omitted, then
		the geometrical center of the shape is used (this is the default).
	*/
	[optional, property] ::com::sun::star::drawing::Direction3D RotationCenter;

	/** The draw:extrusion-shininess specifies the shininess of a mirror in percent.
	*/
	[optional, property] double Shininess;

	/** The first value of the draw:extrusion-skew attribute specifies the skew amount of
		an extrusion in	percent. The second parameter specifies the skew-angle. Skew settings
		are only applied if the attribute ProjectionMode is ProjectionMode_PARALLEL.
	*/
	[optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Skew;

	/** This attribute specifies the specularity of an extrusion object in percent.
	*/
	[optional, property] double Specularity;

	/** This property defines the projection mode.
	*/
	[optional, property] com::sun::star::drawing::ProjectionMode ProjectionMode;

	/** This attribute specifies the viewpoint of the observer.
	*/
	[optional, property] ::com::sun::star::drawing::Position3D ViewPoint;

	/** This attribute specifies the origin within the bounding box of the
	    shape in terms of the shape size fractions.
	*/
	[optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Origin;

	/** This attribute specifies if the "SecondFillColor" is used as extrusion color
	*/
	[optional, property] boolean ExtrusionColor;
};

//=============================================================================

}; }; }; }; 

#endif