| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| import com.sun.star.awt.PushButtonType; |
| import com.sun.star.awt.XControl; |
| import com.sun.star.awt.XDialog; |
| import com.sun.star.awt.XFixedText; |
| import com.sun.star.awt.XListBox; |
| import com.sun.star.awt.XWindow; |
| import com.sun.star.beans.MethodConcept; |
| import com.sun.star.beans.Property; |
| import com.sun.star.beans.PropertyValue; |
| import com.sun.star.beans.XIntrospection; |
| import com.sun.star.beans.XIntrospectionAccess; |
| import com.sun.star.beans.XMultiPropertySet; |
| import com.sun.star.beans.XPropertySet; |
| import com.sun.star.frame.XComponentLoader; |
| import com.sun.star.lang.XMultiComponentFactory; |
| import com.sun.star.lang.XServiceInfo; |
| import com.sun.star.lang.XTypeProvider; |
| import com.sun.star.reflection.XIdlMethod; |
| import com.sun.star.uno.Type; |
| import com.sun.star.uno.UnoRuntime; |
| import com.sun.star.uno.XComponentContext; |
| |
| public class UnoDialogSample2 extends UnoDialogSample { |
| XIntrospectionAccess m_xIntrospectionAccess = null; |
| Object m_oUnoObject = null; |
| // define some constants used to set positions and sizes |
| // of controls. For further information see |
| // http://ui.openoffice.org/knowledge/DialogSpecificationandGuidelines.odt |
| final static int nFixedTextHeight = 8; |
| final static int nControlMargin = 6; |
| final static int nDialogWidth = 250; |
| final static int nDialogHeight = 140; |
| // the default roadmap width == 80 MAPs |
| final static int nRoadmapWidth = 80; |
| final static int nButtonHeight = 14; |
| final static int nButtonWidth = 50; |
| |
| |
| public UnoDialogSample2(XComponentContext _xContext, XMultiComponentFactory _xMCF, Object _oUnoObject) { |
| super(_xContext, _xMCF); |
| try { |
| m_oUnoObject = _oUnoObject; |
| Object o = m_xMCF.createInstanceWithContext("com.sun.star.beans.Introspection", m_xContext); |
| XIntrospection m_xIntrospection = ( XIntrospection ) UnoRuntime.queryInterface(XIntrospection.class, o ); |
| // the variable m_xIntrospectionAccess offers functionality to access all methods and properties |
| // of a variable |
| m_xIntrospectionAccess = m_xIntrospection.inspect(_oUnoObject); |
| } catch (com.sun.star.uno.Exception ex) { |
| ex.printStackTrace(); |
| } |
| } |
| |
| public static void main(String args[]) { |
| UnoDialogSample2 oUnoDialogSample2 = null; |
| try { |
| XComponentContext xContext = com.sun.star.comp.helper.Bootstrap.bootstrap(); |
| if(xContext != null ) |
| System.out.println("Connected to a running office ..."); |
| XMultiComponentFactory xMCF = xContext.getServiceManager(); |
| PropertyValue[] aPropertyValues = new PropertyValue[]{}; |
| // create an arbitrary Uno-Object - in this case an empty writer document.. |
| Object oDesktop =xMCF.createInstanceWithContext("com.sun.star.frame.Desktop", xContext); |
| XComponentLoader xComponentLoader = (XComponentLoader) UnoRuntime.queryInterface(XComponentLoader.class, oDesktop); |
| Object oUnoObject = xComponentLoader.loadComponentFromURL("private:factory/swriter", "_default", 0, aPropertyValues); |
| |
| // define some coordinates where to position the controls |
| final int nButtonPosX = (int)((nDialogWidth/2) - (nButtonWidth/2)); |
| final int nButtonPosY = nDialogHeight - nButtonHeight - nControlMargin; |
| final int nControlPosX = nRoadmapWidth + 2*nControlMargin; |
| final int nControlWidth = nDialogWidth - 3*nControlMargin - nRoadmapWidth; |
| final int nListBoxHeight = nDialogHeight - 4*nControlMargin - nButtonHeight; |
| oUnoDialogSample2 = new UnoDialogSample2(xContext, xMCF, oUnoObject); |
| oUnoDialogSample2.initialize( new String[] {"Height", "Moveable", "Name","PositionX","PositionY", "Step", "TabIndex","Title","Width"}, |
| new Object[] { new Integer(nDialogHeight), Boolean.TRUE, "Dialog1", new Integer(102),new Integer(41), new Integer(1), new Short((short) 0), "Inspect a Uno-Object", new Integer(nDialogWidth)}); |
| String sIntroLabel = "This Dialog lists information about a given Uno-Object.\nIt offers a view to inspect all suppported servicenames, exported interfaces, methods and properties."; |
| oUnoDialogSample2.insertMultiLineFixedText(nControlPosX, 27, nControlWidth, 4, 1, sIntroLabel); |
| // get the data from the UNO object... |
| String[] sSupportedServiceNames = oUnoDialogSample2.getSupportedServiceNames(); |
| String[] sInterfaceNames = oUnoDialogSample2.getExportedInterfaceNames(); |
| String[] sMethodNames = oUnoDialogSample2.getMethodNames(); |
| String[] sPropertyNames = oUnoDialogSample2.getPropertyNames(); |
| // add controls to the dialog... |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 2, sSupportedServiceNames); |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 3, sInterfaceNames); |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 4, sMethodNames); |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 5, sPropertyNames); |
| oUnoDialogSample2.insertButton(oUnoDialogSample2, nButtonPosX, nButtonPosY, nButtonWidth, "~Close", (short) PushButtonType.OK_value); |
| oUnoDialogSample2.insertHorizontalFixedLine(0, nButtonPosY - nControlMargin - 4, nDialogWidth, ""); |
| // create the windowpeer; |
| // it must be kept in mind that it must be created after the insertion of the controls |
| // (see http://qa.openoffice.org/issues/show_bug.cgi?id=75129) |
| oUnoDialogSample2.createWindowPeer(); |
| // add the roadmap control. Note that the roadmap may not be created before the windowpeer of the dialog exists |
| // (see http://qa.openoffice.org/issues/show_bug.cgi?id=67369) |
| oUnoDialogSample2.addRoadmap(oUnoDialogSample2.getRoadmapItemStateChangeListener()); |
| oUnoDialogSample2.insertRoadmapItem(0, true, "Introduction", 1); |
| oUnoDialogSample2.insertRoadmapItem(1, true, "Supported Services", 2); |
| oUnoDialogSample2.insertRoadmapItem(2, true, "Interfaces", 3); |
| oUnoDialogSample2.insertRoadmapItem(3, true, "Methods", 4); |
| oUnoDialogSample2.insertRoadmapItem(4, true, "Properties", 5); |
| oUnoDialogSample2.m_xRMPSet.setPropertyValue("CurrentItemID", new Short((short) 1)); |
| oUnoDialogSample2.m_xRMPSet.setPropertyValue("Complete", Boolean.TRUE); |
| oUnoDialogSample2.xDialog = (XDialog) UnoRuntime.queryInterface(XDialog.class, oUnoDialogSample2.m_xDialogControl); |
| oUnoDialogSample2.xDialog.execute(); |
| }catch( Exception ex ) { |
| ex.printStackTrace(System.out); |
| } |
| finally{ |
| //make sure always to dispose the component and free the memory! |
| if (oUnoDialogSample2 != null){ |
| if (oUnoDialogSample2.m_xComponent != null){ |
| oUnoDialogSample2.m_xComponent.dispose(); |
| } |
| } |
| } |
| |
| System.exit( 0 ); |
| } |
| |
| |
| public String[] getMethodNames() { |
| String[] sMethodNames = new String[]{}; |
| try { |
| XIdlMethod[] xIdlMethods = m_xIntrospectionAccess.getMethods(MethodConcept.ALL); |
| sMethodNames = new String[xIdlMethods.length]; |
| for (int i = 0; i < xIdlMethods.length; i++){ |
| sMethodNames[i] = xIdlMethods[i].getName(); |
| } |
| } |
| catch( Exception e ) { |
| System.err.println( e ); |
| } |
| return sMethodNames; |
| } |
| |
| // returns the names of all supported servicenames of a UNO object |
| public String[] getSupportedServiceNames() { |
| String[] sSupportedServiceNames = new String[]{}; |
| // If the Uno-Object supports "com.sun.star.lang.XServiceInfo" |
| // this will give access to all supported servicenames |
| XServiceInfo xServiceInfo = ( XServiceInfo ) UnoRuntime.queryInterface( XServiceInfo.class, m_oUnoObject); |
| if ( xServiceInfo != null ) { |
| sSupportedServiceNames = xServiceInfo.getSupportedServiceNames(); |
| } |
| return sSupportedServiceNames; |
| } |
| |
| // returns the names of all properties of a UNO object |
| protected String[] getPropertyNames() { |
| String[] sPropertyNames = new String[]{}; |
| try { |
| Property[] aProperties = m_xIntrospectionAccess.getProperties(com.sun.star.beans.PropertyConcept.ATTRIBUTES + com.sun.star.beans.PropertyConcept.PROPERTYSET); |
| sPropertyNames = new String[aProperties.length]; |
| for (int i = 0; i < aProperties.length; i++){ |
| sPropertyNames[i] = aProperties[i].Name; |
| } |
| } |
| catch( Exception e ) { |
| System.err.println( e ); |
| } |
| return sPropertyNames; |
| } |
| |
| |
| // returns the names of all exported interfaces of a UNO object |
| protected String[] getExportedInterfaceNames(){ |
| Type[] aTypes = new Type[]{}; |
| String[] sTypeNames = new String[]{}; |
| // The XTypeProvider interfaces offers access to all exported interfaces |
| XTypeProvider xTypeProvider = ( XTypeProvider ) UnoRuntime.queryInterface( XTypeProvider.class, m_oUnoObject); |
| if ( xTypeProvider != null ) { |
| aTypes = xTypeProvider.getTypes(); |
| sTypeNames = new String[aTypes.length]; |
| for (int i = 0; i < aTypes.length - 1; i++){ |
| sTypeNames[i] = aTypes[i].getTypeName(); |
| } |
| } |
| return sTypeNames; |
| } |
| |
| |
| |
| public XListBox insertListBox(int _nPosX, int _nPosY, int _nHeight, int _nWidth, int _nStep, String[] _sStringItemList) { |
| XListBox xListBox = null; |
| try{ |
| // create a unique name by means of an own implementation... |
| String sName = createUniqueName(m_xDlgModelNameContainer, "ListBox"); |
| // create a controlmodel at the multiservicefactory of the dialog model... |
| Object oListBoxModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlListBoxModel"); |
| XMultiPropertySet xLBModelMPSet = (XMultiPropertySet) UnoRuntime.queryInterface(XMultiPropertySet.class, oListBoxModel); |
| // Set the properties at the model - keep in mind to pass the property names in alphabetical order! |
| xLBModelMPSet.setPropertyValues( |
| new String[] {"Dropdown", "Height", "Name", "PositionX", "PositionY", "ReadOnly", "Step", "StringItemList", "Width" } , |
| new Object[] {Boolean.FALSE, new Integer(_nHeight), sName, new Integer(_nPosX), new Integer(_nPosY), Boolean.TRUE, new Integer(_nStep), _sStringItemList, new Integer(_nWidth)}); |
| m_xDlgModelNameContainer.insertByName(sName, xLBModelMPSet); |
| }catch (com.sun.star.uno.Exception ex) { |
| throw new java.lang.RuntimeException("cannot happen..."); |
| } |
| return xListBox; |
| } |
| |
| |
| public void insertMultiLineFixedText(int _nPosX, int _nPosY, int _nWidth, int _nLineCount, int _nStep, String _sLabel) { |
| try { |
| // create a unique name by means of an own implementation... |
| String sName = createUniqueName(m_xDlgModelNameContainer, "Label"); |
| int nHeight = _nLineCount * nFixedTextHeight; |
| // create a controlmodel at the multiservicefactory of the dialog model... |
| Object oFTModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlFixedTextModel"); |
| XMultiPropertySet xFTModelMPSet = (XMultiPropertySet) UnoRuntime.queryInterface(XMultiPropertySet.class, oFTModel); |
| // Set the properties at the model - keep in mind to pass the property names in alphabetical order! |
| xFTModelMPSet.setPropertyValues( |
| new String[] {"Height", "Label", "MultiLine", "Name", "PositionX", "PositionY", "Step", "Width"}, |
| new Object[] { new Integer(nHeight), _sLabel, Boolean.TRUE, sName, new Integer(_nPosX), new Integer(_nPosY), new Integer(_nStep), new Integer(_nWidth)}); |
| // add the model to the NameContainer of the dialog model |
| m_xDlgModelNameContainer.insertByName(sName, oFTModel); |
| }catch (com.sun.star.uno.Exception ex){ |
| /* perform individual exception handling here. |
| * Possible exception types are: |
| * com.sun.star.lang.IllegalArgumentException, |
| * com.sun.star.lang.WrappedTargetException, |
| * com.sun.star.container.ElementExistException, |
| * com.sun.star.beans.PropertyVetoException, |
| * com.sun.star.beans.UnknownPropertyException, |
| * com.sun.star.uno.Exception |
| */ |
| ex.printStackTrace(System.out); |
| } |
| } |
| |
| }// end of class |
