Google Git
Sign in
apache / openoffice / bab44dcac0296df22024f3f10e7997de78ed4094 / . / AOO410 / main / filter / source / msfilter / msocximex.cxx
blob: 5940f406efd276a5c3fc675f1eb63c24bfb7ab72 [file] [log] [blame]
/**************************************************************
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*
*************************************************************/
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_filter.hxx"
/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
#include <com/sun/star/uno/Any.h>
#include <com/sun/star/text/VertOrientation.hpp>
#include <com/sun/star/text/XText.hpp>
#ifndef _COM_SUN_STAR_LANG_XSERVICEINFO_HDL_
#include <com/sun/star/lang/XServiceInfo.hpp>
#endif
#include <com/sun/star/text/TextContentAnchorType.hpp>
#include <com/sun/star/drawing/XShape.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/drawing/XDrawPage.hpp>
#include <com/sun/star/drawing/XShapes.hpp>
#include <com/sun/star/drawing/XControlShape.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/container/XIndexContainer.hpp>
#include <com/sun/star/drawing/XDrawPageSupplier.hpp>
#include <com/sun/star/form/XFormsSupplier.hpp>
#include <com/sun/star/form/XForm.hpp>
#include <com/sun/star/form/FormComponentType.hpp>
#include <com/sun/star/awt/FontWeight.hpp>
#include <com/sun/star/awt/FontSlant.hpp>
#include <com/sun/star/awt/FontUnderline.hpp>
#include <com/sun/star/awt/FontStrikeout.hpp>
#include <com/sun/star/awt/ScrollBarOrientation.hpp>
#include <com/sun/star/style/VerticalAlignment.hpp>
#include <comphelper/extract.hxx>
#include <com/sun/star/awt/XControlModel.hpp>
#include <com/sun/star/io/XInputStreamProvider.hpp>
#include <rtl/ustrbuf.hxx>
#include <vcl/svapp.hxx>
#include <sfx2/objsh.hxx>
#include <xmlscript/xmldlg_imexp.hxx>
#include <filter/msfilter/msocximex.hxx>
#include <osl/file.hxx>
#include <unotools/ucbstreamhelper.hxx>
#include <com/sun/star/embed/XStorage.hpp>
#include <com/sun/star/embed/XTransactedObject.hpp>
#include <com/sun/star/embed/ElementModes.hpp>
#include <comphelper/processfactory.hxx> // shouldn't be needed
#include <com/sun/star/ucb/XSimpleFileAccess.hpp>
#include <algorithm>
#include <memory>
#ifndef C2S
#define C2S(cChar) String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM(cChar))
#endif
#ifndef C2U
#define C2U(cChar) rtl::OUString::createFromAscii(cChar)
#endif
using namespace ::com::sun::star;
using namespace ::rtl;
using namespace cppu;
#define WW8_ASCII2STR(s) String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM(s))
static char sWW8_form[] = "WW-Standard";
struct SortOrderByTabPos
{
bool operator()( const OCX_Control* a, const OCX_Control* b )
{
return a->mnTabPos < b->mnTabPos;
}
};
sal_uInt8 __READONLY_DATA OCX_Control::aObjInfo[4] = { 0x00, 0x12, 0x03, 0x00 };
long ReadAlign(SvStorageStream *pS, long nPos, int nAmount)
{
if (long nAlign = nPos % nAmount)
{
long nLen = nAmount - nAlign;
pS->SeekRel(nLen);
return nLen;
}
return 0;
}
// NP - Images in controls in OO2.0/SO8 exist as links, e.g. they are not part of the document so are
// referenced externally. On import from ms document try to save images for controls here.
// Images are stored in directory called temp in the user installation directory. Next version of OO/SO
// hopefully will address this issue and allow a choice e.g. images for controls to be stored as links
// or embeded in the document.
// [out]location path to the stream to where the image is to be stored,
// if same name exists in folder then this function calcuates a new name
// [in] data raw bytes of image to be stored.
// [in] dataLen no. byte to be stored
//
// returns, true if successful
bool storePictureInFileSystem( OUString& location, sal_uInt8* data, sal_uInt32 dataLen )
{
bool result = true;
OUString origPath = location;
try
{
uno::Reference<lang::XMultiServiceFactory > xMSF( ::comphelper::getProcessServiceFactory(),
uno::UNO_QUERY_THROW );
uno::Reference< com::sun::star::ucb::XSimpleFileAccess> xSFA( xMSF->createInstance(
OUString::createFromAscii( "com.sun.star.ucb.SimpleFileAccess") ),
uno::UNO_QUERY_THROW );
OUString ext;
sal_Int32 index = 0;
while ( xSFA->exists( location ) )
{
ext = OUString::valueOf( ++index );
location = origPath + ext;
}
SvStream* pStream = ::utl::UcbStreamHelper::CreateStream( location, STREAM_WRITE | STREAM_TRUNC );
if ( pStream )
{
pStream->Write(data, dataLen);
delete pStream;
}
else
{
result = false;
}
}
catch( uno::Exception& )
{
result = false;
}
return result;
}
// NP - Images in controls in OO2.0/SO8 exist as links, e.g. they are not part of the document so are
// referenced externally. On import from ms document try to save images from controls here so this
// at least a macro programmer has a chance to accessed them manually later. Next version of OO/SO
// hopefully will address this issue.
// Images will be stored in a top level folder in the document package, folder is named "MigratedImages"
// [in] pDocSh* the document shell.
// [in] name name of stream image to stored in.
// [in] data raw bytes of image to be stored.
// [in] dataLen no. byte to be stored
bool storePictureInDoc( SfxObjectShell* pDocSh, OUString& name, sal_uInt8* data, sal_uInt32 dataLen )
{
uno::Reference < embed::XStorage > xStor;
if (pDocSh)
{
xStor = pDocSh->GetStorage();
if( xStor.is() )
{
try
{
uno::Reference< embed::XStorage > xPictures = xStor->openStorageElement(
OUString( RTL_CONSTASCII_USTRINGPARAM( "MigratedImages" ) ),
embed::ElementModes::READWRITE );
uno::Reference< beans::XPropertySet > xPropSet( xPictures, uno::UNO_QUERY );
// Set media type of folder MigratedImages to something ( that is unknown ) so that
// it will get copied to exported OO/SO format after SaveAs
if ( xPropSet.is() )
{
OUString aMediaType = C2U("MigrationImages");
uno::Any a;
a <<= aMediaType;
xPropSet->setPropertyValue( C2U("MediaType"), a );
}
uno::Reference< io::XStream > xObjReplStr = xPictures->openStreamElement(
name,
embed::ElementModes::READWRITE | embed::ElementModes::TRUNCATE );
uno::Reference< io::XOutputStream > xOutStream( xObjReplStr->getOutputStream(), uno::UNO_QUERY_THROW );
uno::Sequence< sal_Int8 > imageBytes( (sal_Int8*)data, dataLen );
xOutStream->writeBytes( imageBytes );
xOutStream->closeOutput();
uno::Reference< embed::XTransactedObject > xTransact( xPictures, uno::UNO_QUERY );
if ( xTransact.is() )
{
xTransact->commit();
}
}
catch( uno::Exception& )
{
return false;
}
}
else
{
// no storage something wrong
return false;
}
}
else
{
//No doc shell
return false;
}
return true;
}
long WriteAlign(SvStorageStream *pS, int nAmount)
{
if (long nAlign = pS->Tell() % nAmount)
{
long nLen = nAmount - nAlign;
for (long i=0; i< nLen; ++i)
*pS << sal_uInt8(0x00);
return nLen;
}
return 0;
}
// string import/export =======================================================
/** #117832# import of form control names
* control name is located in stream ("\3OCXNAME")
* a strings in "\3OCXNAME" stream seem to be terminated by 4 trailing bytes of 0's.
* ====
* Note: If the string in the stream is overwritten by a shorter string
* some characters from the original string may remain, the new string however
* will still be terminated in the same way e.g. by 4 bytes with value 0.
*/
bool writeOCXNAME( const OUString& sOCXName, SvStorageStream* pStream )
{
const sal_Unicode* buffer = sOCXName.getStr();
for ( sal_Int32 index=0; index < sOCXName.getLength(); index++ )
{
sal_uInt16 ch = static_cast< sal_uInt16 >( buffer[ index ] );
*pStream << ch;
}
// write
*pStream << sal_uInt32(0);
return ( SVSTREAM_OK == pStream->GetError() );
}
bool readOCXNAME( OUString& sCName, SvStorageStream* pStream )
{
/*
* Read uniCode until no data or 0 encountered
*/
OUStringBuffer buf(40);
do
{
sal_uInt16 ch = 0;
*pStream >> ch;
sal_Unicode uni = static_cast< sal_Unicode >( ch );
if ( uni == 0 )
{
break;
}
buf.append( &uni, 1 );
} while ( !pStream->IsEof() );
sCName = buf.makeStringAndClear();
return ( SVSTREAM_OK == pStream->GetError() );
}
/* #110435# (DR, 2003-11-12) ** Import of Unicode strings in form controls **
Strings may be stored either as compressed or uncompressed Unicode
character array. There are no encoded byte strings anywhere.
The string length field stores the length of the character array (not the
character count of the string) in the lower 31 bits, and the compression
state in the highest bit.
A set bit means the character array is compressed. This means all Unicode
characters are <=0xFF. Therefore the high bytes of all characters are left
out, and the character array size is equal to the string length.
A cleared bit means the character array is not compressed. The buffer
contains Little-Endian Unicode characters, and the resulting string length
is half the buffer size.
TODO: This implementation of the new string import is a hack to keep
msocximex.hxx unchanged. A better implementation would replace the char*
members of all classes by something more reasonable.
*/
namespace {
const sal_uInt32 SVX_MSOCX_SIZEMASK = 0x7FFFFFFF; /// Mask for character buffer size.
const sal_uInt32 SVX_MSOCX_COMPRESSED = 0x80000000; /// 1 = compressed Unicode array.
/** Returns true, if the passed length field specifies a compressed character array.
*/
inline bool lclIsCompressed( sal_uInt32 nLenFld )
{
return (nLenFld & SVX_MSOCX_COMPRESSED) != 0;
}
/** Extracts and returns the memory size of the character buffer.
@return Character buffer size (may differ from resulting string length!).
*/
inline sal_uInt32 lclGetBufferSize( sal_uInt32 nLenFld )
{
return nLenFld & SVX_MSOCX_SIZEMASK;
}
// import ---------------------------------------------------------------------
/** Reads the character array of a string in a form control.
Creates a new character array containing the character data.
The length field must be read before and passed to this function.
Aligns stream position to multiple of 4 before.
@param rStrm
The input stream.
@param rpcCharArr
(out-param) Will point to the created character array,
or will be 0 if string is empty. The array is NOT null-terminated.
If the passed pointer points to an old existing array, it will be
deleted before. Caller must delete the returned array.
@param nLenFld
The corresponding string length field read somewhere before.
*/
void lclReadCharArray( SvStorageStream& rStrm, char*& rpcCharArr, sal_uInt32 nLenFld, long nPos )
{
delete[] rpcCharArr;
rpcCharArr = 0;
sal_uInt32 nBufSize = lclGetBufferSize( nLenFld );
DBG_ASSERT( nBufSize <= 0xFFFF, "lclReadCharArray - possible read error: char array is too big" );
if( nBufSize && nBufSize <= 0xFFFF )
{
rpcCharArr = new char[ nBufSize ];
if( rpcCharArr )
{
ReadAlign( &rStrm, nPos, 4 );
rStrm.Read( rpcCharArr, nBufSize );
}
}
}
/** Creates an OUString from a character array created with lclReadCharArray().
The passed parameters must match, that means the length field must be the
same used to create the passed character array.
@param pcCharArr
The character array returned by lclReadCharArray(). May be compressed
or uncompressed, next parameter nLenFld will specify this.
@param nLenFld
MUST be the same string length field that has been passed to
lclReadCharArray() to create the character array in previous parameter
pcCharArr.
@return
An OUString containing the decoded string data. Will be empty if
pcCharArr is 0.
*/
OUString lclCreateOUString( const char* pcCharArr, sal_uInt32 nLenFld )
{
OUStringBuffer aBuffer;
sal_uInt32 nBufSize = lclGetBufferSize( nLenFld );
if( lclIsCompressed( nLenFld ) )
{
// buffer contains compressed Unicode, not encoded bytestring
sal_Int32 nStrLen = static_cast< sal_Int32 >( nBufSize );
aBuffer.setLength( nStrLen );
const char* pcCurrChar = pcCharArr;
for( sal_Int32 nChar = 0; nChar < nStrLen; ++nChar, ++pcCurrChar )
/* *pcCurrChar may contain negative values and therefore MUST be
casted to unsigned char, before assigned to a sal_Unicode. */
aBuffer.setCharAt( nChar, static_cast< unsigned char >( *pcCurrChar ) );
}
else
{
// buffer contains Little-Endian Unicode
sal_Int32 nStrLen = static_cast< sal_Int32 >( nBufSize ) / 2;
aBuffer.setLength( nStrLen );
const char* pcCurrChar = pcCharArr;
for( sal_Int32 nChar = 0; nChar < nStrLen; ++nChar )
{
/* *pcCurrChar may contain negative values and therefore MUST be
casted to unsigned char, before assigned to a sal_Unicode. */
sal_Unicode cChar = static_cast< unsigned char >( *pcCurrChar++ );
cChar |= (static_cast< unsigned char >( *pcCurrChar++ ) << 8);
aBuffer.setCharAt( nChar, cChar );
}
}
return aBuffer.makeStringAndClear();
}
// export ---------------------------------------------------------------------
/** This class implements writing a character array from a Unicode string.
Usage:
1) Construct an instance, either directly with an OUString, or with an UNO
Any containing an OUString.
2) Check with HasData(), if there is something to write.
3) Write the string length field with WriteLenField() at the right place.
4) Write the encoded character array with WriteCharArray().
*/
class SvxOcxString
{
public:
/** Constructs an empty string. String data may be set later by assignment. */
inline explicit SvxOcxString() : mnLenFld( 0 ) {}
/** Constructs the string from the passed OUString. */
inline explicit SvxOcxString( const OUString& rStr ) { Init( rStr ); }
/** Constructs the string from the passed UNO Any. */
inline explicit SvxOcxString( const uno::Any& rAny ) { Init( rAny ); }
/** Assigns the passed string to the object. */
inline SvxOcxString& operator=( const OUString& rStr ) { Init( rStr ); return *this; }
/** Assigns the string in the passed UNO Any to the object. */
inline SvxOcxString& operator=( const uno::Any& rAny ) { Init( rAny ); return *this; }
/** Returns true, if the string contains at least one character to write. */
inline bool HasData() const { return maString.getLength() > 0; }
/** Writes the encoded 32-bit string length field. Aligns stream position to mult. of 4 before. */
void WriteLenField( SvStorageStream& rStrm ) const;
/** Writes the encoded character array. Aligns stream position to mult. of 4 before. */
void WriteCharArray( SvStorageStream& rStrm ) const;
private:
inline void Init( const OUString& rStr ) { maString = rStr; Init(); }
void Init( const uno::Any& rAny );
void Init();
OUString maString; /// The initial string data.
sal_uInt32 mnLenFld; /// The encoded string length field.
};
void SvxOcxString::Init( const uno::Any& rAny )
{
if( !(rAny >>= maString) )
maString = OUString();
Init();
}
void SvxOcxString::Init()
{
mnLenFld = static_cast< sal_uInt32 >( maString.getLength() );
bool bCompr = true;
// try to find a character >= 0x100 -> character array will be stored uncompressed then
if( const sal_Unicode* pChar = maString.getStr() )
for( const sal_Unicode* pEnd = pChar + maString.getLength(); bCompr && (pChar < pEnd); ++pChar )
bCompr = (*pChar < 0x100);
if( bCompr )
mnLenFld |= SVX_MSOCX_COMPRESSED;
else
mnLenFld *= 2;
}
void SvxOcxString::WriteLenField( SvStorageStream& rStrm ) const
{
if( HasData() )
{
WriteAlign( &rStrm, 4);
rStrm << mnLenFld;
}
}
void SvxOcxString::WriteCharArray( SvStorageStream& rStrm ) const
{
if( HasData() )
{
const sal_Unicode* pChar = maString.getStr();
const sal_Unicode* pEnd = pChar + maString.getLength();
bool bCompr = lclIsCompressed( mnLenFld );
WriteAlign( &rStrm, 4);
for( ; pChar < pEnd; ++pChar )
{
// write compressed Unicode (not encoded bytestring), or Little-Endian Unicode
rStrm << static_cast< sal_uInt8 >( *pChar );
if( !bCompr )
rStrm << static_cast< sal_uInt8 >( *pChar >> 8 );
}
}
}
const sal_uInt16 USERFORM = (sal_uInt16)0xFF;
const sal_uInt16 STDCONTAINER = (sal_uInt16)0xFE;
const sal_uInt16 PAGE = (sal_uInt16)0x07;
const sal_uInt16 IMAGE = (sal_uInt16)0x0C;
const sal_uInt16 FRAME = (sal_uInt16)0x0E;
const sal_uInt16 SPINBUTTON = (sal_uInt16)0x10;
const sal_uInt16 CMDBUTTON = (sal_uInt16)0x11;
const sal_uInt16 TABSTRIP = (sal_uInt16)0x12;
const sal_uInt16 LABEL = (sal_uInt16)0x15;
const sal_uInt16 TEXTBOX = (sal_uInt16)0x17;
const sal_uInt16 LISTBOX = (sal_uInt16)0x18;
const sal_uInt16 COMBOBOX = (sal_uInt16)0x19;
const sal_uInt16 CHECKBOX = (sal_uInt16)0x1A;
const sal_uInt16 OPTIONBUTTON = (sal_uInt16)0x1B;
const sal_uInt16 TOGGLEBUTTON = (sal_uInt16)0x1C;
const sal_uInt16 SCROLLBAR = (sal_uInt16)0x2F;
const sal_uInt16 MULTIPAGE = (sal_uInt16)0x39;
const sal_uInt16 PROGRESSBAR = (sal_uInt16)0x8000;
typedef std::vector< ContainerRecord > ContainerRecordList;
class ContainerRecReader
{
public:
virtual ~ContainerRecReader() {}
virtual bool Read( OCX_ContainerControl* pContainerControl, SvStorageStream *pS)
{
*pS >> nNoRecords;
*pS >> nTotalLen;
if ( isMultiPage )
{
if ( !handleMultiPageHdr( pS ) )
{
return false;
}
}
else
{
if ( !handleStandardHdr( pS ) )
{
return false;
}
}
records.clear();
for (sal_uInt32 nRecord = 0; nRecord < nNoRecords; ++nRecord)
{
// DR #134146# redo loading of FrameChild data
ContainerRecord rec;
// record header
sal_uInt16 nId, nSize;
*pS >> nId >> nSize;
sal_Size nStartPos = pS->Tell();
// content flags
sal_uInt32 nContentFlags;
*pS >> nContentFlags;
// length of control name
sal_uInt32 nNameLen = 0;
if( nContentFlags & 0x00000001 )
*pS >> nNameLen;
// length of control tag
sal_uInt32 nTagLen = 0;
if( nContentFlags & 0x00000002 )
*pS >> nTagLen;
// substorage id for frames
if( nContentFlags & 0x00000004 )
*pS >> rec.nSubStorageId;
// help-context id
if( nContentFlags & 0x00000008 )
pS->SeekRel( 4 );
// option flags
if( nContentFlags & 0x00000010 )
{
sal_uInt32 nBitFlags = 0;
*pS >> nBitFlags;
rec.bVisible = ( ( nBitFlags & 0x02 ) == 0x02 );
}
// substream size
if( nContentFlags & 0x00000020 )
*pS >> rec.nSubStreamLen;
// tabstop position
if( nContentFlags & 0x00000040 )
*pS >> rec.nTabPos;
// control type
if( nContentFlags & 0x00000080 )
*pS >> rec.nTypeIdent;
// length of infotip
sal_uInt32 nTipLen = 0;
if( nContentFlags & 0x00000800 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
*pS >> nTipLen;
}
sal_uInt32 nCntrlIdLen = 0;
if( nContentFlags & 0x00001000 )
*pS >> nCntrlIdLen;
// length of control source name
sal_uInt32 nCtrlSrcLen = 0;
if( nContentFlags & 0x00002000 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
*pS >> nCtrlSrcLen;
}
// length of row source name
sal_uInt32 nRowSrcLen = 0;
if( nContentFlags & 0x00004000 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
*pS >> nRowSrcLen;
}
// control name
sal_Char* pName = 0;
sal_uInt32 nNameBufSize = lclGetBufferSize( nNameLen );
if( nNameBufSize > 0 )
{
pName = new char[ nNameBufSize ];
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
pS->Read( pName, nNameBufSize );
}
// control tag
sal_uInt32 nTagBufSize = lclGetBufferSize( nTagLen );
if( nTagBufSize > 0 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
pS->SeekRel( nTagBufSize );
}
// control position
if( nContentFlags & 0x00000100 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
*pS >> rec.nLeft >> rec.nTop;
}
// control infotip
sal_uInt32 nTipBufSize = lclGetBufferSize( nTipLen );
if( nTipBufSize > 0 )
{
std::auto_ptr< sal_Char > pTipName;
pTipName.reset( new sal_Char[ nTipBufSize ] );
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
pS->Read( pTipName.get(), nTipBufSize );
rec.controlTip = lclCreateOUString( pTipName.get(), nTipLen );
}
// control id
sal_uInt32 nCntrlIdSize = lclGetBufferSize( nCntrlIdLen );
if( nCntrlIdSize > 0 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
pS->SeekRel( nCntrlIdSize );
}
// control source name
sal_uInt32 nCtrlSrcBufSize = lclGetBufferSize( nCtrlSrcLen );
if( nCtrlSrcBufSize > 0 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
pS->SeekRel( nCtrlSrcBufSize );
}
// row source name
sal_uInt32 nRowSrcBufSize = lclGetBufferSize( nRowSrcLen );
if( nRowSrcBufSize > 0 )
{
ReadAlign( pS, pS->Tell() - nStartPos, 4 );
pS->SeekRel( nRowSrcBufSize );
}
// seek to end of data
pS->Seek( nStartPos + nSize );
rec.cName = lclCreateOUString(pName, nNameLen);
delete[] pName;
OCX_Control* pControl = NULL;
if( pContainerControl->createFromContainerRecord( rec, pControl ) &&
pControl )
{
// propagate doc shell from parent
pControl->pDocSh = pContainerControl->pDocSh;
pContainerControl->ProcessControl( pControl, pS, rec );
}
else
{
DBG_ERROR("Terminating import, unexpected error");
return false;
}
}
return true;
}
protected:
ContainerRecReader() : isMultiPage(false){}
bool isMultiPage;
sal_uInt32 nNoRecords;
sal_uInt32 nTotalLen;
private:
bool handleStandardHdr( SvStorageStream* pS )
{
sal_uInt8 aUnknown11[4];
pS->Read(aUnknown11, sizeof(aUnknown11));
return true;
}
bool handleMultiPageHdr( SvStorageStream* pS )
{
sal_uInt32 nUnknown_32b; // unknown 32 bit structure, flags ?
sal_uInt16 nUnknown_16b; // unknown 16 bit structure
sal_uInt16 nMysteryLen; // lenght of unknown sub record
*pS >> nUnknown_32b;
*pS >> nUnknown_16b;
*pS >> nMysteryLen;
pS->SeekRel( nMysteryLen );
return true;
}
ContainerRecordList records;
};
class StdContainerRecReader : public ContainerRecReader
{
public:
StdContainerRecReader(){}
};
class MultiPageContainerRecReader : public ContainerRecReader
{
public:
MultiPageContainerRecReader()
{
// NP ( 27-01-05 )
// Strictly speaking this approach shouldn't be necessary.
// It should be possible to have a common routine read the
// container record array and by examining the flags present in
// the record to determine we expect to read or not.
// In this case for a MultPage control there is no Top or Left
// values in the control record array, however time contraints
// and associated risk prevent further investigation of this
// at the moment.
// similar situation exists for the start of the container record
// which in the case of the MultiPage is different from
// UserForm & Frame ( the other containers )
isMultiPage = true; // tell the base class skip
}
};
class ContainerRecordReaderFac
{
public:
static ContainerRecReader* instance( sal_uInt32 containerType )
{
switch( containerType )
{
case PAGE:
case FRAME:
case USERFORM:
case STDCONTAINER:
return new StdContainerRecReader();
case MULTIPAGE:
return new MultiPageContainerRecReader();
default:
DBG_ERROR("Illegal container type for factory");
return NULL;
}
}
private:
ContainerRecordReaderFac();
};
} // namespace
// ============================================================================
void RBGroup::add(OCX_Control* pRB)
{
// The tab index for the group is calculated as
// the lowest tab index found in the list of RadioButtons
if ( pRB->mnTabPos < mRBGroupPos )
{
mRBGroupPos = pRB->mnTabPos;
CtrlIterator aEnd = mpControls.end();
for (CtrlIterator aIter = mpControls.begin(); aIter != aEnd; ++ aIter )
{
(*aIter)->mnTabPos = mRBGroupPos;
}
}
mpControls.push_back( pRB );
}
struct SortGroupByTabPos
{
bool operator()( const RBGroup* a, const RBGroup* b )
{
return a->tabPos() < b->tabPos();
}
};
RBGroupManager::RBGroupManager( String& defaultName ):mSDefaultName( defaultName ),
numRadioButtons(0)
{
groupList.reserve( 8 ); // reserve far more than we expect
}
RBGroupManager::~RBGroupManager()
{
for ( GroupIterator gIter=groupList.begin(); gIter!=groupList.end(); ++gIter )
{
delete( *gIter );
}
}
// Loose description of the method below ( I sure there is a better way to do
// this )
// In order to "fake" MS grouping behavior for OptionButtons the OptionButtons
// in the same group need to have consecutive tab indices ( regardless of the
// imported tab indices of the RadioButtons ). Additionally if two
// groups of OptionButtons end up having all consecutive indices they
// will be treated as a single group by OpenOffice. In this case
// a dummy seperator control needs to be inserted between the groups.
//
// This method returns a new list "destinationList" containing the controls
// passed in "sourceList" and the OptionButtons contained in the various
// Groups maintained by this class.
// Controls are ordered in the destination list by tab index.
// Each RadioButtonGroup has a tab index associated with it.
// ( Tab index of a RadioGroup is determined as the tab index of the
// OptionButton control with the lowest tab index in the group )
void RBGroupManager::addRadioButton( OCX_OptionButton* pRButton )
{
if ( pRButton )
{
OUString groupName = mSDefaultName;
if ( pRButton->nGroupNameLen )
{
groupName =
lclCreateOUString(pRButton->pGroupName,
pRButton->nGroupNameLen);
}
++numRadioButtons;
RBGroupHash::iterator iter = rbGroups.find( groupName );
if ( iter != rbGroups.end() )
{
iter->second->controls().push_back( pRButton );
}
else
{
RBGroup* newGroup = new RBGroup(pRButton->mnTabPos);
newGroup->controls().push_back( pRButton );
rbGroups[ groupName ] = newGroup;
groupList.push_back( newGroup );
}
}
}
CtrlList RBGroupManager::insertGroupsIntoControlList( const CtrlList& sourceList )
{
::std::sort( groupList.begin(), groupList.end(), SortGroupByTabPos() );
std::vector<OCX_Control*> destinationList;
if ( groupList.size() )
{
destinationList.reserve( sourceList.size() + numRadioButtons );
GroupIterator groupEnd = groupList.end();
CtrlIteratorConst sourceEnd = sourceList.end();
size_t prevGroupListSize = 0;
CtrlIteratorConst containees = sourceList.begin();
GroupIterator groupIter=groupList.begin();
while ( containees != sourceEnd ||
groupIter != groupEnd )
{
bool addGroupSeperator = false;
if ( containees != sourceEnd )
{
if ( groupIter != groupEnd )
{
sal_Int16 groupTabPos = (*groupIter)->tabPos();
if ( (*containees)->mnTabPos >= groupTabPos )
{
if ( !(destinationList.size() >= prevGroupListSize ))
{
addGroupSeperator = true;
}
copyList( (*groupIter)->controls(), destinationList, addGroupSeperator );
++groupIter;
prevGroupListSize = destinationList.size();
}
}
destinationList.push_back(*containees);
++containees;
}
else
{
if ( groupIter != groupEnd )
{
if ( !(destinationList.size() > prevGroupListSize ))
{
addGroupSeperator = true;
}
copyList( (*groupIter)->controls(), destinationList, addGroupSeperator );
++groupIter;
prevGroupListSize = destinationList.size();
}
}
}
}
else
{
destinationList = sourceList;
}
return destinationList;
}
void RBGroupManager::addSeperator( std::vector< OCX_Control* >& dest )
{
OCX_Control* seperator = new OCX_CommandButton;
seperator->SetInDialog(true);
seperator->sName = C2S("GroupSeperator");
dest.push_back( seperator );
}
void RBGroupManager::copyList( std::vector< OCX_Control* >& src,
std::vector< OCX_Control* >& dest,
bool addGroupSeperator )
{
if ( addGroupSeperator )
{
addSeperator( dest );
}
for ( CtrlIterator rbIter = src.begin(); rbIter != src.end(); ++rbIter )
{
dest.push_back( *rbIter );
}
}
class OCX_UserFormLabel : public OCX_Label
{
public:
OCX_UserFormLabel(OCX_Control* pParent ) : OCX_Label( pParent )
{
mnForeColor = 0x80000012L;
mnBackColor = 0x8000000FL;
}
};
sal_uInt16 OCX_Control::nStandardId(0x0200);
sal_uInt16 OCX_FontData::nStandardId(0x0200);
sal_uInt32 OCX_Control::pColor[25] = {
0xC0C0C0, 0x008080, 0x000080, 0x808080, 0xC0C0C0, 0xFFFFFF, 0x000000,
0x000000, 0x000000, 0xFFFFFF, 0xC0C0C0, 0xC0C0C0, 0x808080, 0x000080,
0xFFFFFF, 0xC0C0C0, 0x808080, 0x808080, 0x000000, 0xC0C0C0, 0xFFFFFF,
0x000000, 0xC0C0C0, 0x000000, 0xFFFFC0 };
void OCX_Control::FillSystemColors()
{
// overwrite the predefined colors with available system colors
const StyleSettings& rSett = Application::GetSettings().GetStyleSettings();
pColor[ 0x00 ] = rSett.GetFaceColor().GetColor();
pColor[ 0x01 ] = rSett.GetWorkspaceColor().GetColor();
pColor[ 0x02 ] = rSett.GetActiveColor().GetColor();
pColor[ 0x03 ] = rSett.GetDeactiveColor().GetColor();
pColor[ 0x04 ] = rSett.GetMenuBarColor().GetColor();
pColor[ 0x05 ] = rSett.GetWindowColor().GetColor();
pColor[ 0x07 ] = rSett.GetMenuTextColor().GetColor();
pColor[ 0x08 ] = rSett.GetWindowTextColor().GetColor();
pColor[ 0x09 ] = rSett.GetActiveTextColor().GetColor();
pColor[ 0x0A ] = rSett.GetActiveBorderColor().GetColor();
pColor[ 0x0B ] = rSett.GetDeactiveBorderColor().GetColor();
pColor[ 0x0C ] = rSett.GetWorkspaceColor().GetColor();
pColor[ 0x0D ] = rSett.GetHighlightColor().GetColor();
pColor[ 0x0E ] = rSett.GetHighlightTextColor().GetColor();
pColor[ 0x0F ] = rSett.GetFaceColor().GetColor();
pColor[ 0x10 ] = rSett.GetShadowColor().GetColor();
pColor[ 0x12 ] = rSett.GetButtonTextColor().GetColor();
pColor[ 0x13 ] = rSett.GetDeactiveTextColor().GetColor();
pColor[ 0x14 ] = rSett.GetHighlightColor().GetColor();
pColor[ 0x15 ] = rSett.GetDarkShadowColor().GetColor();
pColor[ 0x16 ] = rSett.GetShadowColor().GetColor();
pColor[ 0x17 ] = rSett.GetHelpTextColor().GetColor();
pColor[ 0x18 ] = rSett.GetHelpColor().GetColor();
}
sal_uInt32 OCX_Control::ImportColor(sal_uInt32 nColor) const
{
sal_uInt8 nUpper = (sal_uInt8)( nColor >> 24 );
if (nUpper & 0x80) //Palette color, should be switch on bottom 24 bits
{
/*Might as well use my systems ones in the absence of any other ideas*/
nColor = nColor&0x00FFFFFF;
DBG_ASSERT (nColor <= 24,"Unknown Palette Index");
if (nColor > 24)
nColor = 0xFFFFFF;
else
nColor = pColor[nColor];
}
else
{
//Stored in bgr! rather than rgb
nColor = SwapColor(nColor);
}
return nColor;
}
sal_Int16 OCX_FontData::ImportAlign(sal_uInt8 _nJustification) const
{
sal_Int16 nRet;
switch (_nJustification)
{
default:
case 1:
nRet = 0;
break;
case 2:
nRet = 2;
break;
case 3:
nRet = 1;
break;
}
return nRet;
}
sal_uInt8 OCX_FontData::ExportAlign(sal_Int16 nAlign) const
{
sal_Int8 nRet;
switch (nAlign)
{
default:
case 0:
nRet = 1;
break;
case 2:
nRet = 2;
break;
case 1:
nRet = 3;
break;
}
return nRet;
}
sal_uInt32 OCX_Control::SwapColor(sal_uInt32 nColor) const
{
sal_uInt8
r(static_cast<sal_uInt8>(nColor&0xFF)),
g(static_cast<sal_uInt8>(((nColor)>>8)&0xFF)),
b(static_cast<sal_uInt8>((nColor>>16)&0xFF));
nColor = (r<<16) + (g<<8) + b;
return nColor;
}
sal_uInt32 OCX_Control::ExportColor(sal_uInt32 nColor) const
{
sal_uInt8 nUpper = (sal_uInt8)( nColor >> 24 );
if (nUpper & 0x80) //Palette color, should be switch on bottom 24 bits
{
/*Might as well use my systems ones in the absence of any other ideas*/
nColor = nColor&0x00FFFFFF;
DBG_ASSERT (nColor <= 24,"Unknown Palette Index");
if (nColor > 24)
nColor = 0xFFFFFF;
else
nColor = pColor[nColor];
}
//Stored in bgr! rather than rgb
nColor = SwapColor(nColor);
return nColor;
}
sal_Bool OCX_Control::Import(
const uno::Reference< lang::XMultiServiceFactory > &rServiceFactory,
uno::Reference< form::XFormComponent > &rFComp, awt::Size &rSz)
{
if(msFormType.getLength() == 0)
return sal_False;
rSz.Width = nWidth;
rSz.Height = nHeight;
uno::Reference<uno::XInterface> xCreate =
rServiceFactory->createInstance(msFormType);
if (!xCreate.is())
return sal_False;
rFComp = uno::Reference<form::XFormComponent>(xCreate,uno::UNO_QUERY);
if (!rFComp.is())
return sal_False;
uno::Reference<beans::XPropertySet> xPropSet(xCreate,uno::UNO_QUERY);
if (!xPropSet.is())
return sal_False;
return Import(xPropSet);
}
sal_Bool OCX_Control::Import(uno::Reference<container::XNameContainer> &rDialog
)
{
uno::Reference<lang::XMultiServiceFactory>
xFactory(rDialog, uno::UNO_QUERY);
uno::Reference<uno::XInterface> xCreate =
xFactory->createInstance(msDialogType);
if (!xCreate.is())
return sal_False;
uno::Reference<awt::XControlModel> xModel(xCreate, uno::UNO_QUERY);
if (!xModel.is())
return sal_False;
/* #147900# sometimes insertion of a control fails due to existing name,
do not break entire form import then... */
try
{
rDialog->insertByName(sName, uno::makeAny(xModel));
}
catch( uno::Exception& )
{
DBG_ERRORFILE(
ByteString( "OCX_Control::Import - cannot insert control \"" ).
Append( ByteString( sName, RTL_TEXTENCODING_UTF8 ) ).
Append( '"' ).GetBuffer() );
}
uno::Reference<beans::XPropertySet> xPropSet(xCreate, uno::UNO_QUERY);
if (!xPropSet.is())
return sal_False;
if (!Import(xPropSet))
return sal_False;
uno::Any aTmp;
aTmp <<= sal_Int32((mnLeft * 2) / 100);
xPropSet->setPropertyValue(WW8_ASCII2STR("PositionX"), aTmp);
aTmp <<= sal_Int32((mnTop * 2) / 100);
xPropSet->setPropertyValue(WW8_ASCII2STR("PositionY"), aTmp);
aTmp <<= sal_Int32((nWidth * 2) / 100);
xPropSet->setPropertyValue(WW8_ASCII2STR("Width"), aTmp);
aTmp <<= sal_Int32((nHeight * 2) / 100);
xPropSet->setPropertyValue(WW8_ASCII2STR("Height"), aTmp);
if ( msToolTip.Len() > 0 )
xPropSet->setPropertyValue(WW8_ASCII2STR("HelpText"), uno::Any(OUString(msToolTip)));
if ( mnStep )
{
aTmp <<= mnStep;
xPropSet->setPropertyValue(WW8_ASCII2STR("Step"), aTmp);
}
try
{
xPropSet->setPropertyValue(WW8_ASCII2STR("EnableVisible"), uno::makeAny( mbVisible ) );
}
catch( uno::Exception& )
{
}
return sal_True;
}
sal_Int16 OCX_Control::ImportBorder(sal_uInt16 nSpecialEffect,
sal_uInt16 nBorderStyle) const
{
if ((nSpecialEffect == 0) && (nBorderStyle == 0))
return 0; //No Border
else if ((nSpecialEffect == 0) && (nBorderStyle == 1))
return 2; //Flat Border
return 1; //3D Border
}
sal_uInt8 OCX_Control::ExportBorder(sal_uInt16 nBorder,sal_uInt8 &rBorderStyle)
const
{
sal_uInt8 nRet;
switch(nBorder)
{
case 0:
nRet = rBorderStyle = 0;
break;
default:
case 1:
nRet = 2;
rBorderStyle = 0;
break;
case 2:
nRet = 0;
rBorderStyle = 1;
break;
}
return nRet;
}
sal_Int16 OCX_Control::ImportSpecEffect( sal_uInt8 nSpecialEffect ) const
{
return (nSpecialEffect == 0) ? 2 : 1;
}
sal_uInt8 OCX_Control::ExportSpecEffect( sal_Int16 nApiEffect ) const
{
return (nApiEffect == 2) ? 0 : 2;
}
sal_Bool OCX_Control::ReadFontData(SvStorageStream *pS)
{
return aFontData.Read(pS);
}
const uno::Reference< drawing::XDrawPage >&
SvxMSConvertOCXControls::GetDrawPage()
{
if( !xDrawPage.is() && pDocSh )
{
uno::Reference< drawing::XDrawPageSupplier > xTxtDoc(pDocSh->GetModel(),
uno::UNO_QUERY);
DBG_ASSERT(xTxtDoc.is(),"XDrawPageSupplier nicht vom XModel erhalten");
xDrawPage = xTxtDoc->getDrawPage();
DBG_ASSERT( xDrawPage.is(), "XDrawPage nicht erhalten" );
}
return xDrawPage;
}
const uno::Reference< lang::XMultiServiceFactory >&
SvxMSConvertOCXControls::GetServiceFactory()
{
if( !xServiceFactory.is() && pDocSh )
{
xServiceFactory = uno::Reference< lang::XMultiServiceFactory >
(pDocSh->GetBaseModel(), uno::UNO_QUERY);
DBG_ASSERT( xServiceFactory.is(),
"XMultiServiceFactory nicht vom Model erhalten" );
}
return xServiceFactory;
}
const uno::Reference< drawing::XShapes >& SvxMSConvertOCXControls::GetShapes()
{
if( !xShapes.is() )
{
GetDrawPage();
if( xDrawPage.is() )
{
xShapes = uno::Reference< drawing::XShapes >(xDrawPage,
uno::UNO_QUERY);
DBG_ASSERT( xShapes.is(), "XShapes nicht vom XDrawPage erhalten" );
}
}
return xShapes;
}
const uno::Reference< container::XIndexContainer >&
SvxMSConvertOCXControls::GetFormComps()
{
if( !xFormComps.is() )
{
GetDrawPage();
if( xDrawPage.is() )
{
uno::Reference< form::XFormsSupplier > xFormsSupplier( xDrawPage,
uno::UNO_QUERY );
DBG_ASSERT( xFormsSupplier.is(),
"XFormsSupplier nicht vom XDrawPage erhalten" );
uno::Reference< container::XNameContainer > xNameCont =
xFormsSupplier->getForms();
// Das Formular bekommt einen Namen wie "WW-Standard[n]" und
// wird in jedem Fall neu angelegt.
UniString sName( sWW8_form, RTL_TEXTENCODING_MS_1252 );
sal_uInt16 n = 0;
while( xNameCont->hasByName( sName ) )
{
sName.AssignAscii( sWW8_form );
sName += String::CreateFromInt32( ++n );
}
const uno::Reference< lang::XMultiServiceFactory > &rServiceFactory
= GetServiceFactory();
if( !rServiceFactory.is() )
return xFormComps;
uno::Reference< uno::XInterface > xCreate =
rServiceFactory->createInstance(WW8_ASCII2STR(
"com.sun.star.form.component.Form"));
if( xCreate.is() )
{
uno::Reference< beans::XPropertySet > xFormPropSet( xCreate,
uno::UNO_QUERY );
uno::Any aTmp(&sName,getCppuType((OUString *)0));
xFormPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
uno::Reference< form::XForm > xForm( xCreate, uno::UNO_QUERY );
DBG_ASSERT(xForm.is(), "keine Form?");
uno::Reference< container::XIndexContainer > xForms( xNameCont,
uno::UNO_QUERY );
DBG_ASSERT( xForms.is(), "XForms nicht erhalten" );
aTmp.setValue( &xForm,
::getCppuType((uno::Reference < form::XForm >*)0));
xForms->insertByIndex( xForms->getCount(), aTmp );
xFormComps = uno::Reference< container::XIndexContainer >
(xCreate, uno::UNO_QUERY);
}
}
}
return xFormComps;
}
sal_Bool OCX_CommandButton::Import( com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
//fBackStyle is a flag. 1 means with background color. 0 means default.
if( fBackStyle )
aTmp <<= ImportColor(mnBackColor);
else
aTmp = uno::Any();
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
sal_Bool bTemp;
if ((!(fEnabled)) || (fLocked))
bTemp = sal_False;
else
bTemp = sal_True;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
bTemp = fWordWrap != 0;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiLine"), aTmp);
if (pCaption)
{
aTmp <<= lclCreateOUString( pCaption, nCaptionLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("Label"), aTmp);
}
aTmp = bool2any( mbTakeFocus );
rPropSet->setPropertyValue( WW8_ASCII2STR( "FocusOnClick" ), aTmp );
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_GroupBox::Export(SvStorageRef& /* rObj */,
const uno::Reference< beans::XPropertySet >& /* rPropSet */,
const awt::Size& /* rSize */ )
{
sal_Bool bRet=sal_True;
return bRet;
}
sal_Bool OCX_GroupBox::WriteContents(SvStorageStreamRef& /* rObj */,
const uno::Reference< beans::XPropertySet >& /* rPropSet */,
const awt::Size& /* rSize */)
{
sal_Bool bRet=sal_True;
return bRet;
}
sal_Bool OCX_CommandButton::WriteContents(SvStorageStreamRef& rContents,
const uno::Reference< beans::XPropertySet >& rPropSet,
const awt::Size& rSize )
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(8);
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
//fBackStyle is a flag. 1 means with background color. 0 means default.
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
else
fBackStyle = 0;
*rContents << ExportColor(mnBackColor);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
sal_uInt8 nTemp=0;//fEnabled;
if (fEnabled)
nTemp |= 0x02;//has enabled prop
if (fBackStyle)
nTemp |= 0x08;//has background color
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
nTemp = 0;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("MultiLine"));
fWordWrap = any2bool(aTmp);
if (fWordWrap)
nTemp |= 0x80;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
SvxOcxString aCaption( rPropSet->getPropertyValue(WW8_ASCII2STR("Label")) );
aCaption.WriteLenField( *rContents );
aCaption.WriteCharArray( *rContents );
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
// "take focus on click" is directly in content flags, not in option field...
mbTakeFocus = any2bool( rPropSet->getPropertyValue( WW8_ASCII2STR( "FocusOnClick" ) ) );
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
aFontData.nDefaultAlign = 1;
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
sal_uInt8 nTmp = 0x27;
if (aCaption.HasData())
nTmp |= 0x08;
*rContents << nTmp;
nTmp = 0x00;
if( !mbTakeFocus ) // flag is set, if option is off
nTmp |= 0x02;
*rContents << nTmp;
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
DBG_ASSERT((rContents.Is() && (SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_CommandButton::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x32, 0x05, 0xD7,
0x69, 0xCE, 0xCD, 0x11, 0xA7, 0x77, 0x00, 0xDD,
0x01, 0x14, 0x3C, 0x57, 0x22, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6d, 0x73, 0x20,
0x32, 0x2e, 0x30, 0x20, 0x43, 0x6F, 0x6D, 0x6D,
0x61, 0x6E, 0x64, 0x42, 0x75, 0x74, 0x74, 0x6F,
0x6E, 0x00, 0x10, 0x00, 0x00, 0x00, 0x45, 0x6D,
0x62, 0x65, 0x64, 0x64, 0x65, 0x64, 0x20, 0x4F,
0x62, 0x6A, 0x65, 0x63, 0x74, 0x00, 0x16, 0x00,
0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x2E,
0x43, 0x6F, 0x6D, 0x6D, 0x61, 0x6E, 0x64, 0x42,
0x75, 0x74, 0x74, 0x6F, 0x6E, 0x2E, 0x31, 0x00,
0xF4, 0x39, 0xB2, 0x71, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x43, 0x00, 0x6F, 0x00, 0x6D, 0x00, 0x6D, 0x00,
0x61, 0x00, 0x6E, 0x00, 0x64, 0x00, 0x42, 0x00,
0x75, 0x00, 0x74, 0x00, 0x74, 0x00, 0x6F, 0x00,
0x6E, 0x00, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents,rPropSet,rSize);
}
sal_Bool OCX_ImageButton::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(8);
uno::Any aTmp=rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
sal_uInt8 nTemp=0;//fEnabled;
if (fEnabled)
nTemp |= 0x02;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
sal_uInt8 nTmp = 0x26;
*rContents << nTmp;
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
DBG_ASSERT((rContents.Is() && (SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_ImageButton::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x32, 0x05, 0xD7,
0x69, 0xCE, 0xCD, 0x11, 0xA7, 0x77, 0x00, 0xDD,
0x01, 0x14, 0x3C, 0x57, 0x22, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6d, 0x73, 0x20,
0x32, 0x2e, 0x30, 0x20, 0x43, 0x6F, 0x6D, 0x6D,
0x61, 0x6E, 0x64, 0x42, 0x75, 0x74, 0x74, 0x6F,
0x6E, 0x00, 0x10, 0x00, 0x00, 0x00, 0x45, 0x6D,
0x62, 0x65, 0x64, 0x64, 0x65, 0x64, 0x20, 0x4F,
0x62, 0x6A, 0x65, 0x63, 0x74, 0x00, 0x16, 0x00,
0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x2E,
0x43, 0x6F, 0x6D, 0x6D, 0x61, 0x6E, 0x64, 0x42,
0x75, 0x74, 0x74, 0x6F, 0x6E, 0x2E, 0x31, 0x00,
0xF4, 0x39, 0xB2, 0x71, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x43, 0x00, 0x6F, 0x00, 0x6D, 0x00, 0x6D, 0x00,
0x61, 0x00, 0x6E, 0x00, 0x64, 0x00, 0x42, 0x00,
0x75, 0x00, 0x74, 0x00, 0x74, 0x00, 0x6F, 0x00,
0x6E, 0x00, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents,rPropSet,rSize);
}
sal_Bool OCX_OptionButton::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
// background color: fBackStyle==0 -> transparent
if( fBackStyle )
aTmp <<= ImportColor(mnBackColor);
else
aTmp = uno::Any();
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
sal_Bool bTemp;
if ((!(fEnabled)) || (fLocked))
bTemp = sal_False;
else
bTemp = sal_True;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
bTemp = fWordWrap != 0;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiLine"), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
aTmp <<= ImportSpecEffect( nSpecialEffect );
rPropSet->setPropertyValue( WW8_ASCII2STR("VisualEffect"), aTmp);
if (pValue && !bSetInDialog)
{
sal_Int16 nTmp = pValue[0]-0x30;
aTmp <<= nTmp;
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultState"), aTmp);
}
if (pCaption)
{
aTmp <<= lclCreateOUString( pCaption, nCaptionLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("Label"), aTmp);
}
// #i40279# always centered vertically
aTmp <<= ::com::sun::star::style::VerticalAlignment_MIDDLE;
rPropSet->setPropertyValue( WW8_ASCII2STR("VerticalAlign"), aTmp );
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_OptionButton::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
else
fBackStyle = 0;
sal_uInt8 nTemp=0;//=fEnabled;
if (fEnabled)
nTemp |= 0x02;
if (fBackStyle)
nTemp |= 0x08;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x00);
nTemp = 0;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("MultiLine"));
fWordWrap = any2bool(aTmp);
if (fWordWrap)
nTemp |= 0x80;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
nStyle = 5;
*rContents << nStyle;
pBlockFlags[0] |= 0x40;
WriteAlign(rContents,4);
nValueLen = 1|SVX_MSOCX_COMPRESSED;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("DefaultState"));
sal_Int16 nDefault = sal_Int16();
aTmp >>= nDefault;
*rContents << nValueLen;
pBlockFlags[2] |= 0x40;
SvxOcxString aCaption( rPropSet->getPropertyValue(WW8_ASCII2STR("Label")) );
if (aCaption.HasData())
pBlockFlags[2] |= 0x80;
aCaption.WriteLenField( *rContents );
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("VisualEffect"));
if (aTmp.hasValue())
{
sal_Int16 nApiSpecEffect = sal_Int16();
aTmp >>= nApiSpecEffect;
nSpecialEffect = ExportSpecEffect( nApiSpecEffect );
}
*rContents << nSpecialEffect;
pBlockFlags[3] |= 0x04;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
nDefault += 0x30;
*rContents << sal_uInt8(nDefault);
*rContents << sal_uInt8(0x00);
aCaption.WriteCharArray( *rContents );
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_OptionButton::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x50, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x21, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x4F, 0x70, 0x74, 0x69,
0x6F, 0x6E, 0x42, 0x75, 0x74, 0x74, 0x6F, 0x6E,
0x00, 0x10, 0x00, 0x00, 0x00, 0x45, 0x6D, 0x62,
0x65, 0x64, 0x64, 0x65, 0x64, 0x20, 0x4F, 0x62,
0x6A, 0x65, 0x63, 0x74, 0x00, 0x15, 0x00, 0x00,
0x00, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x2E, 0x4F,
0x70, 0x74, 0x69, 0x6F, 0x6E, 0x42, 0x75, 0x74,
0x74, 0x6F, 0x6E, 0x2E, 0x31, 0x00, 0xF4, 0x39,
0xB2, 0x71, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x4F, 0x00, 0x70, 0x00, 0x74, 0x00, 0x69, 0x00,
0x6F, 0x00, 0x6E, 0x00, 0x42, 0x00, 0x75, 0x00,
0x74, 0x00, 0x74, 0x00, 0x6F, 0x00, 0x6E, 0x00,
0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_TextBox::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
aTmp = bool2any( fEnabled != 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
aTmp = bool2any( fLocked != 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR("ReadOnly"), aTmp);
aTmp = bool2any( fHideSelection != 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR( "HideInactiveSelection" ), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
aTmp <<= ImportColor(mnBackColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp <<= ImportBorder(nSpecialEffect,nBorderStyle);
rPropSet->setPropertyValue( WW8_ASCII2STR("Border"), aTmp);
aTmp <<= ImportColor( nBorderColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("BorderColor"), aTmp);
aTmp = bool2any( fMultiLine != 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiLine"), aTmp);
sal_uInt16 nTmp = static_cast<sal_uInt16>(nMaxLength);
aTmp <<= nTmp;
rPropSet->setPropertyValue( WW8_ASCII2STR("MaxTextLen"), aTmp);
sal_Bool bTemp1,bTemp2;
uno::Any aBarsH,aBarsV;
switch(nScrollBars)
{
case 1:
bTemp1 = sal_True;
bTemp2 = sal_False;
break;
case 2:
bTemp1 = sal_False;
bTemp2 = sal_True;
break;
case 3:
bTemp1 = sal_True;
bTemp2 = sal_True;
break;
case 0:
default:
bTemp1 = sal_False;
bTemp2 = sal_False;
break;
}
aBarsH = bool2any(bTemp1);
aBarsV = bool2any(bTemp2);
rPropSet->setPropertyValue( WW8_ASCII2STR("HScroll"), aBarsH);
rPropSet->setPropertyValue( WW8_ASCII2STR("VScroll"), aBarsV);
nTmp = nPasswordChar;
aTmp <<= nTmp;
rPropSet->setPropertyValue( WW8_ASCII2STR("EchoChar"), aTmp);
if (pValue)
{
aTmp <<= lclCreateOUString( pValue, nValueLen );
// DefaultText seems to no longer be in UnoEditControlModel
if ( bSetInDialog )
{
rPropSet->setPropertyValue( WW8_ASCII2STR("Text"), aTmp);
}
else
{
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultText"), aTmp);
}
}
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_TextBox::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0x00;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
sal_uInt8 nTemp=0x19;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
if (fEnabled)
nTemp |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("ReadOnly"));
fLocked = any2bool(aTmp);
if (fLocked)
nTemp |= 0x04;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x48);
*rContents << sal_uInt8(0x80);
fMultiLine = any2bool(rPropSet->getPropertyValue(WW8_ASCII2STR("MultiLine")));
fHideSelection = any2bool(rPropSet->getPropertyValue(WW8_ASCII2STR("HideInactiveSelection")));
nTemp = 0x0C;
if (fMultiLine)
nTemp |= 0x80;
if( fHideSelection )
nTemp |= 0x20;
*rContents << nTemp;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
aTmp = rPropSet->getPropertyValue( WW8_ASCII2STR("MaxTextLen"));
aTmp >>= nMaxLength;
*rContents << nMaxLength;
pBlockFlags[0] |= 0x08;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Border"));
sal_Int16 nBorder = sal_Int16();
aTmp >>= nBorder;
nSpecialEffect = ExportBorder(nBorder,nBorderStyle);
*rContents << nBorderStyle;
pBlockFlags[0] |= 0x10;
aTmp = rPropSet->getPropertyValue( WW8_ASCII2STR("HScroll"));
sal_Bool bTemp1 = any2bool(aTmp);
aTmp = rPropSet->getPropertyValue( WW8_ASCII2STR("VScroll"));
sal_Bool bTemp2 = any2bool(aTmp);
if (!bTemp1 && !bTemp2)
nScrollBars =0;
else if (bTemp1 && bTemp2)
nScrollBars = 3;
else if (!bTemp1 && bTemp2)
nScrollBars = 2;
else
nScrollBars = 1;
*rContents << nScrollBars;
pBlockFlags[0] |= 0x20;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("EchoChar"));
sal_uInt16 nTmp = sal_uInt16();
aTmp >>= nTmp;
nPasswordChar = static_cast<sal_uInt8>(nTmp);
*rContents << nPasswordChar;
pBlockFlags[1] |= 0x02;
SvxOcxString aValue( rPropSet->getPropertyValue(WW8_ASCII2STR("DefaultText")) );
aValue.WriteLenField( *rContents );
if (aValue.HasData())
pBlockFlags[2] |= 0x40;
WriteAlign(rContents,4);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BorderColor"));
if (aTmp.hasValue())
aTmp >>= nBorderColor;
*rContents << ExportColor(nBorderColor);
pBlockFlags[3] |= 0x02;
*rContents << nSpecialEffect;
pBlockFlags[3] |= 0x04;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
aValue.WriteCharArray( *rContents );
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK == rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_TextBox::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x10, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x1C, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x54, 0x65, 0x78, 0x74,
0x42, 0x6F, 0x78, 0x00, 0x10, 0x00, 0x00, 0x00,
0x45, 0x6D, 0x62, 0x65, 0x64, 0x64, 0x65, 0x64,
0x20, 0x4F, 0x62, 0x6A, 0x65, 0x63, 0x74, 0x00,
0x10, 0x00, 0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D,
0x73, 0x2E, 0x54, 0x65, 0x78, 0x74, 0x42, 0x6F,
0x78, 0x2E, 0x31, 0x00, 0xF4, 0x39, 0xB2, 0x71,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x54, 0x00, 0x65, 0x00, 0x78, 0x00, 0x74, 0x00,
0x42, 0x00, 0x6F, 0x00, 0x78, 0x00, 0x31, 0x00,
0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_FieldControl::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0x00;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
sal_uInt8 nTemp=0x19;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
if (fEnabled)
nTemp |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("ReadOnly"));
fLocked = any2bool(aTmp);
if (fLocked)
nTemp |= 0x04;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x48);
*rContents << sal_uInt8(0x80);
nTemp = 0x2C;
*rContents << nTemp;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Border"));
sal_Int16 nBorder = sal_Int16();
aTmp >>= nBorder;
nSpecialEffect = ExportBorder(nBorder,nBorderStyle);
*rContents << nBorderStyle;
pBlockFlags[0] |= 0x10;
#if 0 //Each control has a different Value format, and how to convert each to text has to be found out
SvxOcxString aValue( rPropSet->getPropertyValue(WW8_ASCII2STR("DefaultText")) );
aValue.WriteLenField( *rContents );
if (aValue.HasData())
pBlockFlags[2] |= 0x40;
#endif
*rContents << nSpecialEffect;
pBlockFlags[3] |= 0x04;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
#if 0
aValue.WriteCharArray( *rContents );
#endif
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_FieldControl::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x10, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x1C, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x54, 0x65, 0x78, 0x74,
0x42, 0x6F, 0x78, 0x00, 0x10, 0x00, 0x00, 0x00,
0x45, 0x6D, 0x62, 0x65, 0x64, 0x64, 0x65, 0x64,
0x20, 0x4F, 0x62, 0x6A, 0x65, 0x63, 0x74, 0x00,
0x10, 0x00, 0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D,
0x73, 0x2E, 0x54, 0x65, 0x78, 0x74, 0x42, 0x6F,
0x78, 0x2E, 0x31, 0x00, 0xF4, 0x39, 0xB2, 0x71,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x54, 0x00, 0x65, 0x00, 0x78, 0x00, 0x74, 0x00,
0x42, 0x00, 0x6F, 0x00, 0x78, 0x00, 0x31, 0x00,
0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_ToggleButton::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
aTmp = bool2any(true);
rPropSet->setPropertyValue( WW8_ASCII2STR("Toggle"), aTmp );
sal_Bool bTemp;
if ((!(fEnabled)) || (fLocked))
bTemp = sal_False;
else
bTemp = sal_True;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
bTemp = fWordWrap != 0;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiLine"), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
// fake transparent toggle button by setting window background color
if( !fBackStyle )
mnBackColor = 0x80000005;
aTmp <<= ImportColor(mnBackColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
if (pValue)
{
sal_Int16 nTmp=pValue[0]-0x30;
aTmp <<= nTmp == 1;
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultState"), aTmp);
}
if (pCaption)
{
aTmp <<= lclCreateOUString( pCaption, nCaptionLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("Label"), aTmp);
}
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_ToggleButton::Export(
SvStorageRef &rObj, const uno::Reference< beans::XPropertySet> &rPropSet,
const awt::Size& rSize )
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x60, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x21, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x54, 0x6F, 0x67, 0x67,
0x6C, 0x65, 0x42, 0x75, 0x74, 0x74, 0x6F, 0x6E,
0x00, 0x10, 0x00, 0x00, 0x00, 0x45, 0x6D, 0x62,
0x65, 0x64, 0x64, 0x65, 0x64, 0x20, 0x4F, 0x62,
0x6A, 0x65, 0x63, 0x74, 0x00, 0x15, 0x00, 0x00,
0x00, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x2E, 0x54,
0x6F, 0x67, 0x67, 0x6C, 0x65, 0x42, 0x75, 0x74,
0x74, 0x6F, 0x6E, 0x2E, 0x31, 0x00, 0xF4, 0x39,
0xB2, 0x71, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x54, 0x00, 0x6F, 0x00, 0x67, 0x00, 0x67, 0x00,
0x6C, 0x00, 0x65, 0x00, 0x42, 0x00, 0x75, 0x00,
0x74, 0x00, 0x74, 0x00, 0x6F, 0x00, 0x6E, 0x00,
0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents,rPropSet,rSize);
}
sal_Bool OCX_ToggleButton::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
sal_uInt8 nTemp=fEnabled;
if (fEnabled)
nTemp = nTemp << 1;
if (fBackStyle)
nTemp |= 0x08;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x00);
nTemp = 0;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("MultiLine"));
fWordWrap = any2bool(aTmp);
if (fWordWrap)
nTemp |= 0x80;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
nStyle = 6;
*rContents << nStyle;
pBlockFlags[0] |= 0x40;
WriteAlign(rContents,4);
nValueLen = 1|SVX_MSOCX_COMPRESSED;
bool bDefault = false;
rPropSet->getPropertyValue(WW8_ASCII2STR("DefaultState")) >>= bDefault;
sal_uInt8 nDefault = static_cast< sal_uInt8 >( bDefault ? '1' : '0' );
*rContents << nValueLen;
pBlockFlags[2] |= 0x40;
SvxOcxString aCaption( rPropSet->getPropertyValue(WW8_ASCII2STR("Label")) );
aCaption.WriteLenField( *rContents );
if (aCaption.HasData())
pBlockFlags[2] |= 0x80;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
*rContents << nDefault;
*rContents << sal_uInt8(0x00);
aCaption.WriteCharArray( *rContents );
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_Label::Import(uno::Reference< beans::XPropertySet > &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
sal_Bool bTemp;
if ((!(fEnabled)) || (fLocked))
bTemp = sal_False;
else
bTemp = sal_True;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
// background color: fBackStyle==0 -> transparent
if( fBackStyle )
{
aTmp <<= ImportColor(mnBackColor);
}
else
{
// try fake transparent by using parents backColor
if ( bSetInDialog && mpParent != NULL )
{
aTmp <<= ImportColor( mpParent->mnBackColor );
}
else
{
aTmp = uno::Any(); // use SO default
}
}
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp <<= ImportBorder(nSpecialEffect,nBorderStyle);
rPropSet->setPropertyValue( WW8_ASCII2STR("Border"), aTmp);
aTmp <<= ImportColor( nBorderColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("BorderColor"), aTmp);
bTemp=fWordWrap;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiLine"), aTmp);
if (pCaption)
{
aTmp <<= lclCreateOUString( pCaption, nCaptionLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("Label"), aTmp);
}
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_ComboBox::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
aTmp = bool2any(fEnabled != 0);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
aTmp = bool2any(fLocked != 0);
rPropSet->setPropertyValue( WW8_ASCII2STR("ReadOnly"), aTmp);
aTmp = bool2any( nDropButtonStyle != 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR("Dropdown"), aTmp);
aTmp = bool2any( fHideSelection != 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR( "HideInactiveSelection" ), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
if (pValue)
{
aTmp <<= lclCreateOUString( pValue, nValueLen );
if ( bSetInDialog )
{
rPropSet->setPropertyValue( WW8_ASCII2STR("Text"), aTmp);
}
else
{
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultText"), aTmp);
}
}
aTmp <<= ImportColor(mnBackColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp <<= ImportBorder(nSpecialEffect,nBorderStyle);
rPropSet->setPropertyValue( WW8_ASCII2STR("Border"), aTmp);
aTmp <<= ImportColor( nBorderColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("BorderColor"), aTmp);
sal_Int16 nTmp=static_cast<sal_Int16>(nMaxLength);
aTmp <<= nTmp;
rPropSet->setPropertyValue( WW8_ASCII2STR("MaxTextLen"), aTmp);
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_ComboBox::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0x00;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
sal_uInt8 nTemp=0x19;//fEnabled;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
if (fEnabled)
nTemp |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("ReadOnly"));
fLocked = any2bool(aTmp);
if (fLocked)
nTemp |= 0x04;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x48);
*rContents << sal_uInt8(0x80);
nTemp = 0x0C;
fHideSelection = any2bool(rPropSet->getPropertyValue(WW8_ASCII2STR("HideInactiveSelection")));
if( fHideSelection )
nTemp |= 0x20;
*rContents << nTemp;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Border"));
sal_Int16 nBorder = sal_Int16();
aTmp >>= nBorder;
nSpecialEffect = ExportBorder(nBorder,nBorderStyle);
*rContents << nBorderStyle;
pBlockFlags[0] |= 0x10;
nStyle = 3;
*rContents << nStyle;
pBlockFlags[0] |= 0x40;
WriteAlign(rContents,2);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("LineCount"));
aTmp >>= nListRows;
*rContents << nListRows;
pBlockFlags[1] |= 0x40;
*rContents << sal_uInt8(1); //DefaultSelected One
pBlockFlags[2] |= 0x01;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Dropdown"));
nDropButtonStyle = any2bool(aTmp);
if (nDropButtonStyle)
nDropButtonStyle=0x02;
*rContents << nDropButtonStyle;
pBlockFlags[2] |= 0x04;
SvxOcxString aValue( rPropSet->getPropertyValue(WW8_ASCII2STR("Text")) );
aValue.WriteLenField( *rContents );
if (aValue.HasData())
pBlockFlags[2] |= 0x40;
WriteAlign(rContents,4);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BorderColor"));
if (aTmp.hasValue())
aTmp >>= nBorderColor;
*rContents << ExportColor(nBorderColor);
pBlockFlags[3] |= 0x02;
*rContents << nSpecialEffect;
pBlockFlags[3] |= 0x04;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
aValue.WriteCharArray( *rContents );
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_ComboBox::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x30, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x1D, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x43, 0x6F, 0x6D, 0x62,
0x6F, 0x42, 0x6F, 0x78, 0x00, 0x10, 0x00, 0x00,
0x00, 0x45, 0x6D, 0x62, 0x65, 0x64, 0x64, 0x65,
0x64, 0x20, 0x4F, 0x62, 0x6A, 0x65, 0x63, 0x74,
0x00, 0x11, 0x00, 0x00, 0x00, 0x46, 0x6F, 0x72,
0x6D, 0x73, 0x2E, 0x43, 0x6F, 0x6D, 0x62, 0x6F,
0x42, 0x6F, 0x78, 0x2E, 0x31, 0x00, 0xF4, 0x39,
0xB2, 0x71, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x43, 0x00, 0x6F, 0x00, 0x6D, 0x00, 0x62, 0x00,
0x6F, 0x00, 0x42, 0x00, 0x6F, 0x00, 0x78, 0x00,
0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_ListBox::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
sal_Bool bTmp=fEnabled;
aTmp = bool2any(bTmp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
bTmp=fLocked;
aTmp = bool2any(bTmp);
rPropSet->setPropertyValue( WW8_ASCII2STR("ReadOnly"), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
sal_Bool bTemp = nMultiState;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiSelection"), aTmp);
#if 0 //Don't delete this for now until I figure out if I can make this
if (pValue)
{
aTmp <<= lclCreateOUString( pValue, nValueLen );
xPropSet->setPropertyValue( WW8_ASCII2STR("DefaultText"), aTmp);
}
#endif
aTmp <<= ImportColor(mnBackColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp <<= ImportBorder(nSpecialEffect,nBorderStyle);
rPropSet->setPropertyValue( WW8_ASCII2STR("Border"), aTmp);
aTmp <<= ImportColor( nBorderColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("BorderColor"), aTmp);
aFontData.Import(rPropSet);
return sal_True;
}
sal_Bool OCX_ListBox::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0x01;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
sal_uInt8 nTemp=fEnabled;
if (fEnabled)
nTemp = nTemp << 1;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("ReadOnly"));
fLocked = any2bool(aTmp);
if (fLocked)
nTemp |= 0x04;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Border"));
sal_Int16 nBorder = sal_Int16();
aTmp >>= nBorder;
nSpecialEffect = ExportBorder(nBorder,nBorderStyle);
WriteAlign(rContents,2);
*rContents << nBorderStyle;
pBlockFlags[0] |= 0x10;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("MultiSelection"));
nMultiState = any2bool(aTmp);
if (nMultiState)
{
*rContents << nMultiState;
pBlockFlags[0] |= 0x20;
}
nStyle = 2;
*rContents << nStyle;
pBlockFlags[0] |= 0x40;
WriteAlign(rContents,4);
#if 0
SvxOcxString aValue( rPropSet->getPropertyValue(WW8_ASCII2STR("DefaultText")) );
aValue.WriteLenField( *rContents );
if (aValue.HasData())
pBlockFlags[2] |= 0x40;
WriteAlign(rContents,4);
#endif
WriteAlign(rContents,4);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BorderColor"));
if (aTmp.hasValue())
aTmp >>= nBorderColor;
*rContents << ExportColor(nBorderColor);
pBlockFlags[3] |= 0x02;
*rContents << nSpecialEffect;
pBlockFlags[3] |= 0x04;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
#if 0
aValue.WriteCharArray( *rContents );
#endif
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_ListBox::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x20, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x1C, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x4C, 0x69, 0x73, 0x74,
0x42, 0x6F, 0x78, 0x00, 0x10, 0x00, 0x00, 0x00,
0x45, 0x6D, 0x62, 0x65, 0x64, 0x64, 0x65, 0x64,
0x20, 0x4F, 0x62, 0x6A, 0x65, 0x63, 0x74, 0x00,
0x10, 0x00, 0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D,
0x73, 0x2E, 0x4C, 0x69, 0x73, 0x74, 0x42, 0x6F,
0x78, 0x2E, 0x31, 0x00, 0xF4, 0x39, 0xB2, 0x71,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x4C, 0x00, 0x69, 0x00, 0x73, 0x00, 0x74, 0x00,
0x42, 0x00, 0x6F, 0x00, 0x78, 0x00, 0x31, 0x00,
0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_Control::Read(SvStorageStream *pS)
{
sal_uInt16 nIdentifier, nFixedAreaLen;
*pS >> nIdentifier;
DBG_ASSERT(nStandardId==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->SeekRel(nFixedAreaLen);
return true;
}
sal_Bool OCX_ModernControl::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(nIdentifier==nStandardId,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,8);
if (pBlockFlags[0] & 0x01)
{
sal_uInt8 nTemp;
*pS >> nTemp;
fEnabled = (nTemp & 0x02) >> 1;
fLocked = (nTemp & 0x04) >> 2;
fBackStyle = (nTemp & 0x08) >> 3;
*pS >> nTemp;
fColumnHeads = (nTemp & 0x04) >> 2;
fIntegralHeight = (nTemp & 0x08) >> 3;
fMatchRequired = (nTemp & 0x10) >> 4;
fAlignment = (nTemp & 0x20) >> 5;
*pS >> nTemp;
fDragBehaviour = (nTemp & 0x08) >> 3;
fEnterKeyBehaviour = (nTemp & 0x10) >> 4;
fEnterFieldBehaviour = (nTemp & 0x20) >> 5;
fTabKeyBehaviour = (nTemp & 0x40) >> 6;
fWordWrap = (nTemp & 0x80) >> 7;
*pS >> nTemp;
fSelectionMargin = (nTemp & 0x04) >> 2;
fAutoWordSelect = (nTemp & 0x08) >> 3;
fAutoSize = (nTemp & 0x10) >> 4;
fHideSelection = (nTemp & 0x20) >> 5;
fAutoTab = (nTemp & 0x40) >> 6;
fMultiLine = (nTemp & 0x80) >> 7;
}
/*If any of these are set they follow eachother in this order one after
another padded out to the next U32 boundary with 0's
U8 can abut each other U16 must start on a U16 boundary and are padded to
that with 0's. A standardish word alignment structure*/
if (pBlockFlags[0] & 0x02)
*pS >> mnBackColor;
if (pBlockFlags[0] & 0x04)
*pS >> mnForeColor;
if (pBlockFlags[0] & 0x08)
*pS >> nMaxLength;
if (pBlockFlags[0] & 0x10)
*pS >> nBorderStyle;
if (pBlockFlags[0] & 0x20)
*pS >> nScrollBars;
if (pBlockFlags[0] & 0x40)
*pS >> nStyle;// (UI 0 == Data 3, UI 2 = Data 7)
if (pBlockFlags[0] & 0x80)
*pS >> nMousePointer;
if (pBlockFlags[1] & 0x02)
*pS >> nPasswordChar; //HUH ??? always 0 ??? not sure maybe just padding
if (pBlockFlags[1] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nListWidth;
}
if (pBlockFlags[1] & 0x08)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nBoundColumn;
}
if (pBlockFlags[1] & 0x10)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nTextColumn;
}
if (pBlockFlags[1] & 0x20)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nColumnCount;
}
if (pBlockFlags[1] & 0x40)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nListRows;
}
if (pBlockFlags[1] & 0x80)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nUnknown8; //something to do with ColumnWidths
}
if (pBlockFlags[2] & 0x01)
*pS >> nMatchEntry;
if (pBlockFlags[2] & 0x02)
*pS >> nListStyle;
if (pBlockFlags[2] & 0x04)
*pS >> nShowDropButtonWhen;
if (pBlockFlags[2] & 0x10)
*pS >> nDropButtonStyle;
if (pBlockFlags[2] & 0x20)
*pS >> nMultiState;
bool bValue = (pBlockFlags[2] & 0x40) != 0;
if (bValue)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nValueLen;
}
bool bCaption = (pBlockFlags[2] & 0x80) != 0;
if (bCaption)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nCaptionLen;
}
if (pBlockFlags[3] & 0x01)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nHorzPos;
*pS >> nVertPos;
}
if (pBlockFlags[3] & 0x02)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nBorderColor;
}
if (pBlockFlags[3] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4); // NEW
*pS >> nSpecialEffect;
pS->SeekRel( 3 ); // special effect is 32bit, not 8bit
}
if (pBlockFlags[3] & 0x08)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nIcon;
DBG_ASSERT(nIcon == 0xFFFF, "Unexpected nIcon");
}
if (pBlockFlags[3] & 0x10)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nPicture;
DBG_ASSERT(nPicture == 0xFFFF, "Unexpected nIcon");
}
if (pBlockFlags[3] & 0x20)
*pS >> nAccelerator;
/*
if (pBlockFlags[3] & 0x80)
*pS >> nUnknown9;
*/
bool bGroupName = (pBlockFlags[4] & 0x01) != 0;
if (bGroupName)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nGroupNameLen;
}
//End
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nWidth;
*pS >> nHeight;
if (bValue)
lclReadCharArray( *pS, pValue, nValueLen, pS->Tell() - nStart);
if (bCaption)
lclReadCharArray( *pS, pCaption, nCaptionLen, pS->Tell() - nStart);
if (bGroupName)
lclReadCharArray( *pS, pGroupName, nGroupNameLen, pS->Tell() - nStart);
ReadAlign(pS, pS->Tell() - nStart, 4);
if (nIcon)
{
pS->Read(pIconHeader,20);
*pS >> nIconLen;
pIcon = new sal_uInt8[nIconLen];
pS->Read(pIcon,nIconLen);
}
if (nPicture)
{
pS->Read(pPictureHeader,20);
*pS >> nPictureLen;
pPicture = new sal_uInt8[nPictureLen];
pS->Read(pPicture,nPictureLen);
}
return sal_True;
}
sal_Bool OCX_CommandButton::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(nStandardId==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,4);
if (pBlockFlags[0] & 0x01)
*pS >> mnForeColor;
if (pBlockFlags[0] & 0x02)
*pS >> mnBackColor;
if (pBlockFlags[0] & 0x04)
{
sal_uInt8 nTemp;
*pS >> nTemp;
fEnabled = (nTemp&0x02)>>1;
fLocked = (nTemp&0x04)>>2;
fBackStyle = (nTemp&0x08)>>3;
*pS >> nTemp;
*pS >> nTemp;
fWordWrap = (nTemp&0x80)>>7;
*pS >> nTemp;
fAutoSize = (nTemp&0x10)>>4;
}
bool bCaption = (pBlockFlags[0] & 0x08) != 0;
if (bCaption)
{
*pS >> nCaptionLen;
}
if (pBlockFlags[0] & 0x10) /*Picture Position, a strange mechanism here*/
{
*pS >> nVertPos;
*pS >> nHorzPos;
}
if (pBlockFlags[0] & 0x40) /*MousePointer*/
*pS >> nMousePointer;
if (pBlockFlags[0] & 0x80)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nPicture;
}
if (pBlockFlags[1] & 0x01)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nAccelerator;
}
// "take focus on click" is directly in content flags, not in option field...
mbTakeFocus = (pBlockFlags[1] & 0x02) == 0; // option is on, if flag is not set
if (pBlockFlags[1] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nIcon;
}
if (bCaption)
lclReadCharArray( *pS, pCaption, nCaptionLen, pS->Tell() - nStart);
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nWidth;
*pS >> nHeight;
if (nIcon)
{
pS->Read(pIconHeader,20);
*pS >> nIconLen;
pIcon = new sal_uInt8[nIconLen];
pS->Read(pIcon,nIconLen);
}
if (nPicture)
{
pS->Read(pPictureHeader,20);
*pS >> nPictureLen;
pPicture = new sal_uInt8[nPictureLen];
pS->Read(pPicture,nPictureLen);
}
return sal_True;
}
sal_Bool OCX_Label::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(nStandardId==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,4);
if (pBlockFlags[0] & 0x01)
*pS >> mnForeColor;
if (pBlockFlags[0] & 0x02)
*pS >> mnBackColor;
if (pBlockFlags[0] & 0x04)
{
sal_uInt8 nTemp;
*pS >> nTemp;
fEnabled = (nTemp&0x02)>>1;
fLocked = (nTemp&0x04)>>2;
fBackStyle = (nTemp&0x08)>>3;
*pS >> nTemp;
*pS >> nTemp;
fWordWrap = (nTemp&0x80)>>7;
*pS >> nTemp;
fAutoSize = (nTemp&0x10)>>4;
}
bool bCaption = (pBlockFlags[0] & 0x08) != 0;
if (bCaption)
*pS >> nCaptionLen;
if (pBlockFlags[0] & 0x10)
{
*pS >> nVertPos;
*pS >> nHorzPos;
}
if (pBlockFlags[0] & 0x40)
*pS >> nMousePointer;
if (pBlockFlags[0] & 0x80)
{
ReadAlign(pS,pS->Tell() - nStart, 4);
*pS >> nBorderColor;
}
if (pBlockFlags[1] & 0x01)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nBorderStyle;
}
if (pBlockFlags[1] & 0x02)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nSpecialEffect;
}
if (pBlockFlags[1] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nPicture;
}
if (pBlockFlags[1] & 0x08)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nAccelerator;
}
if (pBlockFlags[1] & 0x10)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nIcon;
}
if (bCaption)
lclReadCharArray( *pS, pCaption, nCaptionLen, pS->Tell() - nStart);
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nWidth;
*pS >> nHeight;
if (nPicture)
{
pS->Read(pPictureHeader,20);
*pS >> nPictureLen;
pPicture = new sal_uInt8[nPictureLen];
pS->Read(pPicture,nPictureLen);
}
if (nIcon)
{
pS->Read(pIconHeader,20);
*pS >> nIconLen;
pIcon = new sal_uInt8[nIconLen];
pS->Read(pIcon,nIconLen);
}
return sal_True;
}
TypeName::TypeName(sal_Char *pName, sal_uInt32 nStoreId, sal_uInt32 nLen, sal_uInt16 nType, sal_Int32 nLeft,
sal_Int32 nTop)
: msName(lclCreateOUString(pName, nLen)), mnType(nType), mnLeft(nLeft),
mnTop(nTop),mnStoreId(nStoreId)
{
}
OCX_ContainerControl::OCX_ContainerControl( SotStorageRef& parent,
const ::rtl::OUString& storageName,
const ::rtl::OUString& sN,
const uno::Reference< container::XNameContainer > &rParent,
OCX_Control* pParent ) :
OCX_Control(sN, pParent), rbGroupMgr( sName ), mxParent(rParent), nNoRecords(0), nTotalLen(0), containerType( STDCONTAINER )
{
mContainerStorage = parent->OpenSotStorage(storageName,
STREAM_READWRITE |
STREAM_NOCREATE |
STREAM_SHARE_DENYALL);
mContainerStream = mContainerStorage->OpenSotStream(
String(RTL_CONSTASCII_STRINGPARAM("f"),
RTL_TEXTENCODING_MS_1252),
STREAM_STD_READ | STREAM_NOCREATE);
mContainedControlsStream = mContainerStorage->OpenSotStream( String(RTL_CONSTASCII_STRINGPARAM("o"),
RTL_TEXTENCODING_MS_1252),
STREAM_STD_READ | STREAM_NOCREATE);
}
OCX_ContainerControl::~OCX_ContainerControl()
{
CtrlIterator aEnd = mpControls.end();
for (CtrlIterator aIter = mpControls.begin(); aIter != aEnd; ++ aIter )
{
delete *aIter;
}
}
// Really import should receive the parent e.g. a Userform, Frame or Multi Page
// and call import on its containees with itself ( up-called from
// the base class ) but... the reality is we have no containment model
// so we make sure rPropSet is always the parent Dialog
sal_Bool OCX_ContainerControl::Import(uno::Reference<beans::XPropertySet>& /* rProps */ )
{
if ( !mxParent.is() )
{
return sal_False;
}
CtrlIterator aEnd = mpControls.end();
// int count = 0;
for (CtrlIterator aIter = mpControls.begin(); aIter != aEnd; ++ aIter )
{
if ( !(*aIter)->Import( mxParent ) )
{
return sal_False;
}
}
return sal_True;
}
OUString OCX_ContainerControl::createSubStreamName( const sal_uInt32& subStorageId )
{
static OUString sI = OUString::createFromAscii("i");
static OUString sZero = OUString::createFromAscii( "0" );
OUStringBuffer buf( 6 );
buf.append( sI );
// for subStorage id < 10 stream name has leading '0'
// eg "i07"
if ( subStorageId < 10 )
{
buf.append( sZero );
}
buf.append( OUString::valueOf( (sal_Int32)subStorageId ) );
return buf.makeStringAndClear();
}
bool OCX_ContainerControl::createFromContainerRecord( const ContainerRecord& record, OCX_Control*& pControl )
{
pControl = NULL;
switch ( record.nTypeIdent)
{
case CMDBUTTON:
pControl = new OCX_CommandButton;
break;
case LABEL:
pControl = new OCX_UserFormLabel(this);
break;
case TEXTBOX:
pControl = new OCX_TextBox;
break;
case LISTBOX:
pControl = new OCX_ListBox;
break;
case COMBOBOX:
pControl = new OCX_ComboBox;
break;
case CHECKBOX:
pControl = new OCX_CheckBox;
break;
case OPTIONBUTTON:
pControl = new OCX_OptionButton;
break;
case TOGGLEBUTTON:
pControl = new OCX_ToggleButton;
break;
case IMAGE: //Image
{
pControl = new OCX_Image;
break;
}
case PAGE: // Page
{
OUString sMSStore = createSubStreamName( record.nSubStorageId );
pControl = new OCX_Page(mContainerStorage, sMSStore,
record.cName, mxParent, this);
break;
}
case MULTIPAGE: // MultiPage
{
OUString sMSStore = createSubStreamName( record.nSubStorageId );
pControl = new OCX_MultiPage( mContainerStorage, sMSStore,
record.cName, mxParent, this);
break;
}
case FRAME: //Frame
{
OUString sFrameStore = createSubStreamName( record.nSubStorageId );
pControl = new OCX_Frame(mContainerStorage, sFrameStore,
record.cName, mxParent, this);
break;
}
case SPINBUTTON: //SpinButton
{
pControl = new OCX_SpinButton;
break;
}
case TABSTRIP: //TabStrip
{
pControl = new OCX_TabStrip;
break;
}
case SCROLLBAR: //ScrollBar
pControl = new OCX_ScrollBar;
break;
case PROGRESSBAR: //ProgressBar Active X control
pControl = new OCX_ProgressBar;
break;
default:
OSL_TRACE( "**** Unknown control 0x%x", record.nTypeIdent );
DBG_ERROR( "Unknown control");
return false;
}
pControl->sName = record.cName;
return true;
}
void addSeperator( std::vector< OCX_Control* >& dest )
{
OCX_Control* seperator = new OCX_CommandButton;
seperator->SetInDialog(true);
seperator->sName = C2S("GroupSeperator");
dest.push_back( seperator );
}
void addRButtons( std::vector< OCX_Control* >& src,
std::vector< OCX_Control* >& dest,
bool addGroupSeperator )
{
if ( addGroupSeperator )
{
addSeperator( dest );
}
for ( CtrlIterator rbIter = src.begin(); rbIter != src.end(); ++rbIter )
{
dest.push_back( *rbIter );
}
}
void OCX_ContainerControl::ProcessControl(OCX_Control* pControl,SvStorageStream* /* pS */, ContainerRecord& rec )
{
SotStorageStreamRef oStream = mContainedControlsStream;
// can insert into OO Dialog (e.g is this a supported dialog control)??
if ( rec.nTypeIdent == SPINBUTTON ||
rec.nTypeIdent == TABSTRIP)
{
// skip the record in the stream, discard the control
oStream->SeekRel( rec.nSubStreamLen );
delete pControl;
}
else
{
// A container control needs to read the f stream in
// the folder ( substorage ) associated with this control
if ( rec.nTypeIdent == FRAME ||
rec.nTypeIdent == MULTIPAGE||
rec.nTypeIdent == PAGE )
{
OCX_ContainerControl* pContainer =
static_cast< OCX_ContainerControl* >( pControl );
oStream = pContainer->getContainerStream();
}
pControl->sName = rec.cName;
pControl->msToolTip = rec.controlTip;
// Position of controls is relative to the container
pControl->mnTop = rec.nTop + mnTop;
pControl->mnLeft = rec.nLeft + mnLeft;
// MS tabIndex, pretty useless in OpenOffice land
// as tab indexes in MS are relative to parent container.
// However we need this value in order to set
// OpenOffice tab indices in a sensible way to
// reflect the ms tabbing from orig MS UserForm, see below
pControl->mnTabPos = rec.nTabPos;
pControl->SetInDialog(true);
pControl->mbVisible = rec.bVisible;
if ( mnStep )
{
// If the container has a step then it should be
// applied to all containees
pControl->mnStep = mnStep;
}
// #117490# DR: container records provide size of substream, use it here...
// remember initial position to set correct stream position
sal_uLong nStrmPos = oStream->Tell();
// import control, may return with invalid stream position
pControl->FullRead(oStream);
// set stream to position behind substream of this control
oStream->Seek( nStrmPos + rec.nSubStreamLen );
//need to fake grouping behaviour for radio ( option ) buttons
if ( rec.nTypeIdent == OPTIONBUTTON )
{
OCX_OptionButton* pRButton =
static_cast< OCX_OptionButton*>(pControl);
rbGroupMgr.addRadioButton( pRButton );
}
else
{
mpControls.push_back( pControl );
}
}
}
sal_Bool OCX_ContainerControl::Read(SvStorageStream *pS)
{
if ( mpParent )
{
mnBackColor = mpParent->mnBackColor;
}
std::auto_ptr< ContainerRecReader > reader (
ContainerRecordReaderFac::instance( containerType ) );
reader->Read( this, pS );
// Need to honour the MS Tab Indexes. However MS tab indexes are
// relative to parent, this hack sorts the controls in each container
// based on the ms tab indexes. When import is called we create the
// controls in Open/Star office based on the order of the tab indexes,
// this ensures that the default tab index created by Star/Open office
// reflects the "flattened" ms tab order.
::std::sort( mpControls.begin(), mpControls.end(), SortOrderByTabPos() );
mpControls = rbGroupMgr.insertGroupsIntoControlList( mpControls );
return true;
}
OCX_MultiPage::OCX_MultiPage( SotStorageRef& parent,
const ::rtl::OUString& storageName,
const ::rtl::OUString& sN,
const uno::Reference< container::XNameContainer > &rDialog,
OCX_Control* pParent):
OCX_ContainerControl(parent, storageName, sN, rDialog, pParent ), fUnknown1(0), fEnabled(1),
fLocked(0), fBackStyle(1), fWordWrap(1), fAutoSize(0), nCaptionLen(0),
nVertPos(1), nHorzPos(7), nMousePointer(0), nBorderColor(0x80000012),
nKeepScrollBarsVisible(3), nCycle(0), nBorderStyle(0), nSpecialEffect(0),
nPicture(0), nPictureAlignment(2), nPictureSizeMode(0),
bPictureTiling(sal_False), nAccelerator(0), nIcon(0), pCaption(0),
nScrollWidth(0), nScrollHeight(0), nIconLen(0), pIcon(0), nPictureLen(0),
pPicture(0)
{
msDialogType = C2U("NotSupported");
mnForeColor = 0x80000012L,
mnBackColor = 0x8000000FL;
bSetInDialog = true;// UserForm control only
aFontData.SetHasAlign(sal_True);
containerType = MULTIPAGE;
mnCurrentPageStep = 0;
}
void OCX_MultiPage::ProcessControl(OCX_Control* pControl, SvStorageStream* /* pS */, ContainerRecord& rec )
{
SotStorageStreamRef oStream = mContainedControlsStream;
OCX_Page *pPage = NULL;
if ( rec.nTypeIdent == PAGE )
pPage = static_cast< OCX_Page* >( pControl );
if ( pPage != NULL )
{
pPage->mnStep = ++mnCurrentPageStep;
pPage->mnTop = mnTop;// move these to Page::import ?
pPage->mnLeft = mnLeft;
pPage->mnBackColor = mnBackColor;
oStream = pPage->getContainerStream();;
// Position of controls is relative to pos of this MuliPage
// Control
pPage->FullRead( oStream );
mpControls.push_back( pPage );
}
else
{
OSL_TRACE("!!!! Unsupported Control 0x%x ", rec.nTypeIdent);
DBG_ERROR("MultiPage error expected Page control");
}
}
sal_Bool OCX_MultiPage::Read(SvStorageStream *pS)
{
// Unlike the other containers e.g. UserForm & Frame
// the o stream is does not contain info for the contained controls
// ( e.g. the pages themselves ) but seems to be for the MultiPage
// itself - need to check this in more detail
// For the moment skip read of the MultiPage specific properties
// not much point reading these as we can't display the multi page
// control or in fact any sort of tabbed layout, best we can do is
// import just the contained controls of the individual pages
// Note: the record skipped below ( does not contain the expected
// info on this control, that seems to be contained in the o stream,
// see comment above)
OCX_Control skip(C2S("Dummy"));
skip.Read( pS );
mnCurrentPageStep = mnStep; //( set step of of pages relative to step
//of this MultiPage ( e.g. emulate containment )
return OCX_ContainerControl::Read(pS);
}
sal_Bool OCX_MultiPage::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
// Calls import on contained controls
OCX_ContainerControl::Import( rPropSet );
return sal_True;
}
sal_Bool OCX_MultiPage::Import(com::sun::star::uno::Reference<
com::sun::star::container::XNameContainer>
&rDialog)
{
uno::Reference<beans::XPropertySet> xPropSet( rDialog, uno::UNO_QUERY );
// Although MultiPage is not represeted by a "real" control we still
// need to propagate the backcolor of this logical parent
// ( the dialog or Frame or whatever ) to the children of this control.
// For example the controls contained in the Page of a
// MultiPage control use the parents backcolor ( e,g,
// Pages backcolor ) when trying to fake transparency
mnBackColor = mpParent->mnBackColor;
if ( xPropSet.is() )
{
// Calls import on contained pages
return OCX_ContainerControl::Import( xPropSet );
}
OSL_TRACE("*** Major problem, no dialog to add controls to ");
DBG_ERROR(" Major problem, no dialog to add controls to ");
return false;
}
OCX_Page::OCX_Page( SotStorageRef& parent,
const ::rtl::OUString& storageName,
const ::rtl::OUString& sN,
const uno::Reference< container::XNameContainer > &rDialog,
OCX_Control* pParent):
OCX_ContainerControl(parent, storageName, sN, rDialog, pParent ),
fUnknown1(0), fEnabled(1), fLocked(0),
fBackStyle(1), fWordWrap(1), fAutoSize(0), nCaptionLen(0), nVertPos(1),
nHorzPos(7), nMousePointer(0), nBorderColor(0x80000012),
nKeepScrollBarsVisible(3), nCycle(0), nBorderStyle(0), nSpecialEffect(0),
nPicture(0), nPictureAlignment(2), nPictureSizeMode(0),
bPictureTiling(sal_False), nAccelerator(0), nIcon(0), pCaption(0),
nScrollWidth(0), nScrollHeight(0), nIconLen(0), pIcon(0), nPictureLen(0),
pPicture(0)
{
msDialogType = C2U("NotSupported");
mnForeColor = 0x80000012,
mnBackColor = 0x8000000F,
bSetInDialog = true;// UserForm control only
aFontData.SetHasAlign(sal_True);
}
sal_Bool OCX_Page::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(0x400==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,4);
pS->SeekRel( nFixedAreaLen - sizeof( pBlockFlags ) );
ReadAlign( pS, pS->Tell() - nStart, 4);
if (pBlockFlags[2] & 0x10)
{
//Font Stuff..
pS->SeekRel(0x1a);
sal_uInt8 nFontLen;
*pS >> nFontLen;
pS->SeekRel(nFontLen);
}
return OCX_ContainerControl::Read(pS);
}
sal_Bool OCX_Page::Import(com::sun::star::uno::Reference<
com::sun::star::container::XNameContainer>
&rDialog)
{
uno::Reference<beans::XPropertySet> xPropSet( rDialog, uno::UNO_QUERY );
if ( xPropSet.is() )
{
// apply Step to contained controls
CtrlIterator aEnd = mpControls.end();
for (CtrlIterator aIter = mpControls.begin(); aIter != aEnd; ++ aIter )
{
(*aIter)->mnStep = mnStep;
}
// Calls import on contained pages
return OCX_ContainerControl::Import( xPropSet );
}
OSL_TRACE("*** Major problem, no dialog to add controls to ");
DBG_ERROR("*** Major problem, no dialog to add controls to ");
return sal_False;
}
OCX_Frame::OCX_Frame( SotStorageRef& parent,
const ::rtl::OUString& storageName,
const ::rtl::OUString& sN,
const uno::Reference< container::XNameContainer > &rDialog, OCX_Control* pParent):
OCX_ContainerControl(parent, storageName, sN, rDialog, pParent ),fUnknown1(0),fEnabled(1), fLocked(0),
fBackStyle(1), fWordWrap(1), fAutoSize(0), nCaptionLen(0), nVertPos(1),
nHorzPos(7), nMousePointer(0), nBorderColor(0x80000012),
nKeepScrollBarsVisible(3), nCycle(0), nBorderStyle(0), nSpecialEffect(0),
nPicture(0), nPictureAlignment(2), nPictureSizeMode(0),
bPictureTiling(sal_False), nAccelerator(0), nIcon(0), pCaption(0),
nScrollWidth(0), nScrollHeight(0), nScrollLeft(0), nScrollTop(0), nIconLen(0), pIcon(0), nPictureLen(0),
pPicture(0)
{
msDialogType = C2U("com.sun.star.awt.UnoControlGroupBoxModel");
mnForeColor = 0x80000012;
mnBackColor = 0x8000000F;
bSetInDialog = true;// UserForm control only
aFontData.SetHasAlign(sal_True);
}
sal_Bool OCX_Frame::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(0x400==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,4);
if (pBlockFlags[0] & 0x01)
{
DBG_ASSERT(!this, "ARSE");
}
if (pBlockFlags[0] & 0x02)
*pS >> mnBackColor;
if (pBlockFlags[0] & 0x04)
*pS >> mnForeColor;
if (pBlockFlags[0] & 0x08)
*pS >> fUnknown1;
if (pBlockFlags[0] & 0x40)
{
sal_uInt8 nTemp;
*pS >> nTemp;
fEnabled = (nTemp&0x04)>>2;
fBackStyle = (nTemp&0x08)>>3;
*pS >> nTemp;
*pS >> nTemp;
fWordWrap = (nTemp&0x80)>>7;
*pS >> nTemp;
fAutoSize = (nTemp&0x10)>>4;
}
if (pBlockFlags[0] & 0x80)
{
*pS >> nBorderStyle;
}
ReadAlign(pS, pS->Tell() - nStart, 4);
if (pBlockFlags[1] & 0x01)
*pS >> nMousePointer;
if (pBlockFlags[1] & 0x02)
*pS >> nKeepScrollBarsVisible;
if (pBlockFlags[1] & 0x20)
*pS >> fUnknown1; // another unknown 32 bit ( or is 8 or 16 bit with padding ? )
if (pBlockFlags[1] & 0x80)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nIcon;
DBG_ASSERT(nIcon == 0xFFFF, "Unexpected nIcon");
}
bool bCaption = false;
if (pBlockFlags[2] & 0x01)
*pS >> nCycle;
if (pBlockFlags[2] & 0x02)
*pS >> nSpecialEffect;
if (pBlockFlags[2] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nBorderColor;
}
if (pBlockFlags[2] & 0x08)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nCaptionLen;
bCaption = true;
}
if (pBlockFlags[2] & 0x10)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
sal_uInt16 nNoIdea;
*pS >> nNoIdea;
DBG_ASSERT(nNoIdea == 0xFFFF, "Expected 0xFFFF, (related to font ?)");
}
if (pBlockFlags[2] & 0x20)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nPicture;
DBG_ASSERT(nPicture == 0xFFFF, "Unexpected nIcon");
}
if (pBlockFlags[2] & 0x80)
*pS >> nPictureAlignment;
if (pBlockFlags[3] & 0x01)
bPictureTiling = true;
if (pBlockFlags[3] & 0x02)
*pS >> nPictureSizeMode;
if (pBlockFlags[3] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> fUnknown8;
}
if (pBlockFlags[3] & 0x08)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> fUnknown9;
}
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nWidth;
*pS >> nHeight;
*pS >> nScrollWidth;
*pS >> nScrollHeight;
if (pBlockFlags[1] & 0x10)
{
*pS >> nScrollLeft;
*pS >> nScrollTop;
}
if ( bCaption )
{
lclReadCharArray( *pS, pCaption, nCaptionLen, pS->Tell() - nStart);
}
OUString tempCaption = lclCreateOUString( pCaption, nCaptionLen );
if (nIcon)
{
pS->Read(pIconHeader,20);
*pS >> nIconLen;
pIcon = new sal_uInt8[nIconLen];
pS->Read(pIcon,nIconLen);
}
if (nPicture)
{
pS->Read(pPictureHeader,20);
*pS >> nPictureLen;
pPicture = new sal_uInt8[nPictureLen];
pS->Read(pPicture,nPictureLen);
}
ReadAlign( pS, pS->Tell() - nStart, 4);
if (pBlockFlags[2] & 0x10)
{
//Font Stuff..
pS->SeekRel(0x1a);
sal_uInt8 nFontLen;
*pS >> nFontLen;
pS->SeekRel(nFontLen);
}
return OCX_ContainerControl::Read( pS );
}
sal_Bool OCX_Frame::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue(
OUString(RTL_CONSTASCII_USTRINGPARAM("Name")), aTmp);
if ( pCaption )
{
aTmp <<= lclCreateOUString( pCaption, nCaptionLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("Label"), aTmp);
}
// Calls import on contained controls
OCX_ContainerControl::Import( rPropSet );
return sal_True;
}
OCX_UserForm::OCX_UserForm( SotStorageRef& parent,
const OUString& storageName,
const OUString& sN,
const ::uno::Reference< container::XNameContainer > &rDialog,
const ::uno::Reference< lang::XMultiServiceFactory >& rMsf):
OCX_ContainerControl(parent, storageName, sN, rDialog),
nChildrenA(0), fEnabled(1), fLocked(0),
fBackStyle(1), fWordWrap(1), fAutoSize(0), nCaptionLen(0), nVertPos(1),
nHorzPos(7), nMousePointer(0), nBorderColor(0x80000012), nChildrenB(0),
nKeepScrollBarsVisible(3), nCycle(0), nBorderStyle(0), nSpecialEffect(0),
nPicture(0), nPictureAlignment(2), nPictureSizeMode(0),
bPictureTiling(sal_False), nAccelerator(0), nIcon(0), pCaption(0),
nScrollWidth(0), nScrollHeight(0), nScrollLeft(0), nScrollTop(0), nIconLen(0), pIcon(0), nPictureLen(0),
pPicture(0)
{
mnForeColor = 0x80000012;
mnBackColor = 0x8000000F;
uno::Reference< beans::XPropertySet> xProps( rMsf, uno::UNO_QUERY);
if ( xProps.is() )
{
xProps->getPropertyValue(C2S("DefaultContext")) >>= mxCtx;
}
aFontData.SetHasAlign(sal_True);
}
sal_Bool OCX_UserForm::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(0x400==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,4);
if (pBlockFlags[0] & 0x01)
{
DBG_ASSERT(!this, "ARSE");
}
if (pBlockFlags[0] & 0x02)
*pS >> mnBackColor;
if (pBlockFlags[0] & 0x04)
*pS >> mnForeColor;
if (pBlockFlags[0] & 0x08)
*pS >> nChildrenA;
if (pBlockFlags[0] & 0x40)
{
sal_uInt8 nTemp;
*pS >> nTemp;
fEnabled = (nTemp&0x04)>>2;
fBackStyle = (nTemp&0x08)>>3;
*pS >> nTemp;
*pS >> nTemp;
fWordWrap = (nTemp&0x80)>>7;
*pS >> nTemp;
fAutoSize = (nTemp&0x10)>>4;
}
if (pBlockFlags[0] & 0x80)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nBorderStyle;
}
#if 0
sal_uInt16 nFixedOrAlign;
*pS >> nFixedOrAlign;
#endif
if (pBlockFlags[1] & 0x01)
*pS >> nMousePointer;
if (pBlockFlags[1] & 0x02)
*pS >> nKeepScrollBarsVisible;
if (pBlockFlags[1] & 0x20)
{
sal_uInt32 nUnknown32;
*pS >> nUnknown32;
}
if (pBlockFlags[1] & 0x80)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nIcon;
DBG_ASSERT(nIcon == 0xFFFF, "Unexpected nIcon");
}
if (pBlockFlags[2] & 0x01)
*pS >> nCycle;
if (pBlockFlags[2] & 0x02)
*pS >> nSpecialEffect;
if (pBlockFlags[2] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nBorderColor;
}
if (pBlockFlags[2] & 0x10)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
sal_uInt16 nNoIdea;
*pS >> nNoIdea;
DBG_ASSERT(nNoIdea == 0xFFFF, "Expected 0xFFFF, (related to font ?)");
}
if (pBlockFlags[2] & 0x20)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nPicture;
DBG_ASSERT(nPicture == 0xFFFF, "Unexpected nIcon");
}
if (pBlockFlags[2] & 0x80)
*pS >> nPictureAlignment;
if (pBlockFlags[3] & 0x01)
bPictureTiling = true;
if (pBlockFlags[3] & 0x02)
*pS >> nPictureSizeMode;
if (pBlockFlags[3] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nChildrenB;
}
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nDrawBuffer;
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nWidth;
*pS >> nHeight;
*pS >> nScrollWidth;
*pS >> nScrollHeight;
if (pBlockFlags[1] & 0x10)
{
*pS >> nScrollLeft;
*pS >> nScrollTop;
}
if (nIcon)
{
pS->Read(pIconHeader,20);
*pS >> nIconLen;
pIcon = new sal_uInt8[nIconLen];
pS->Read(pIcon,nIconLen);
}
if (nPicture)
{
pS->Read(pPictureHeader,20);
*pS >> nPictureLen;
pPicture = new sal_uInt8[nPictureLen];
pS->Read(pPicture,nPictureLen);
}
ReadAlign( pS, pS->Tell() - nStart, 4);
if (pBlockFlags[2] & 0x10)
{
//Font Stuff..
pS->SeekRel(0x1a);
sal_uInt8 nFontLen;
*pS >> nFontLen;
pS->SeekRel(nFontLen);
}
sal_Int16 numTrailingRecs = 0;
*pS >> numTrailingRecs;
// seems to be no. of trailing records,
// before container record starts proper
// ( unknown what these trailing records are for)
if ( numTrailingRecs )
{
for ( ; numTrailingRecs ; --numTrailingRecs )
{
OCX_Control skip(C2S("dummy")) ;
skip.Read( pS );
}
}
return OCX_ContainerControl::Read( pS );
}
sal_Bool OCX_UserForm::Import(
uno::Reference<container::XNameContainer> &rLib )
{
uno::Reference<beans::XPropertySet>
xDialogPropSet(mxParent, uno::UNO_QUERY);
uno::Any aTmp(&sName,getCppuType((OUString *)0));
xDialogPropSet->setPropertyValue(
OUString(RTL_CONSTASCII_USTRINGPARAM("Name")), aTmp);
xDialogPropSet->setPropertyValue(
OUString(RTL_CONSTASCII_USTRINGPARAM("Title")), aTmp);
aTmp <<= ImportColor(mnBackColor);
xDialogPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp <<= sal_Int32((nWidth * 2) / 100);
xDialogPropSet->setPropertyValue(WW8_ASCII2STR("Width"), aTmp);
aTmp <<= sal_Int32((nHeight * 2) / 100);
xDialogPropSet->setPropertyValue(WW8_ASCII2STR("Height"), aTmp);
uno::Reference<beans::XPropertySet> xPropSet( mxParent, uno::UNO_QUERY );
OCX_ContainerControl::Import( xPropSet );
uno::Reference<io::XInputStreamProvider> xSource =
xmlscript::exportDialogModel(mxParent, mxCtx);
uno::Any aSourceAny(uno::makeAny(xSource));
if (rLib->hasByName(sName))
rLib->replaceByName(sName, aSourceAny);
else
rLib->insertByName(sName, aSourceAny);
return sal_True;
}
sal_Bool OCX_Label::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet = sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(8);
pBlockFlags[0] = 0x20;
pBlockFlags[1] = 0;
pBlockFlags[2] = 0;
pBlockFlags[3] = 0;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x01;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
sal_uInt8 nTemp=fEnabled;
if (fEnabled)
nTemp = nTemp << 1;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("MultiLine"));
fWordWrap = any2bool(aTmp);
nTemp=fWordWrap;
nTemp = nTemp << 7;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
pBlockFlags[0] |= 0x04;
SvxOcxString aCaption( rPropSet->getPropertyValue(WW8_ASCII2STR("Label")) );
aCaption.WriteLenField( *rContents );
if (aCaption.HasData())
pBlockFlags[0] |= 0x08;
WriteAlign(rContents,4);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BorderColor"));
if (aTmp.hasValue())
aTmp >>= nBorderColor;
*rContents << ExportColor(nBorderColor);
pBlockFlags[0] |= 0x80;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Border"));
sal_Int16 nBorder = sal_Int16();
aTmp >>= nBorder;
sal_uInt8 nNewBorder;
nSpecialEffect = ExportBorder(nBorder,nNewBorder);
nBorderStyle = nNewBorder;
*rContents << nBorderStyle;
pBlockFlags[1] |= 0x01;
*rContents << nSpecialEffect;
pBlockFlags[1] |= 0x02;
aCaption.WriteCharArray( *rContents );
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_Label::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x23, 0x9E, 0x8C, 0x97,
0xB0, 0xD4, 0xCE, 0x11, 0xBF, 0x2D, 0x00, 0xAA,
0x00, 0x3F, 0x40, 0xD0, 0x1A, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x4C, 0x61, 0x62, 0x65,
0x6C, 0x00, 0x10, 0x00, 0x00, 0x00, 0x45, 0x6D,
0x62, 0x65, 0x64, 0x64, 0x65, 0x64, 0x20, 0x4F,
0x62, 0x6A, 0x65, 0x63, 0x74, 0x00, 0x0E, 0x00,
0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x2E,
0x4C, 0x61, 0x62, 0x65, 0x6C, 0x2E, 0x31, 0x00,
0xF4, 0x39, 0xB2, 0x71, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x4C, 0x00, 0x61, 0x00, 0x62, 0x00, 0x65, 0x00,
0x6C, 0x00, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
/*
static sal_uInt8 __READONLY_DATA aTest[] = {
0x00, 0x02, 0x20, 0x00, 0x2B, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00,
0x06, 0x00, 0x00, 0x80, 0x4C, 0x61, 0x62, 0x65,
0x6C, 0x31, 0x18, 0x00, 0xEC, 0x09, 0x00, 0x00,
0x7B, 0x02, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00,
0x35, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80,
0xC3, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00,
0x54, 0x69, 0x6D, 0x65, 0x73, 0x20, 0x4E, 0x65,
0x77, 0x20, 0x52, 0x6F, 0x6D, 0x61, 0x6E, 0x00,
};
*/
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
typedef OCX_Control *(*FNCreate)();
struct OCX_map
{
FNCreate pCreate;
const char *sId;
sal_Int16 nId;
const char *sName;
};
OCX_map aOCXTab[] =
{
// Command button MUST be at index 0
{&OCX_CommandButton::Create,"D7053240-CE69-11CD-a777-00dd01143c57",
form::FormComponentType::COMMANDBUTTON,"CommandButton"},
// Toggle button MUST be at index 1
{&OCX_ToggleButton::Create,"8BD21D60-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::COMMANDBUTTON,"ToggleButton"},
{&OCX_Label::Create, "978C9E23-D4B0-11CE-bf2d-00aa003f40d0",
form::FormComponentType::FIXEDTEXT,"Label"},
{&OCX_TextBox::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::TEXTFIELD,"TextBox"},
{&OCX_ListBox::Create,"8BD21D20-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::LISTBOX,"ListBox"},
{&OCX_ComboBox::Create,"8BD21D30-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::COMBOBOX,"ComboBox"},
{&OCX_CheckBox::Create,"8BD21D40-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::CHECKBOX,"CheckBox"},
{&OCX_OptionButton::Create,"8BD21D50-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::RADIOBUTTON,"OptionButton"},
{&OCX_Image::Create,"4C599241-6926-101B-9992-00000b65c6f9",
form::FormComponentType::IMAGECONTROL,"Image"},
{&OCX_FieldControl::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::DATEFIELD,"TextBox"},
{&OCX_FieldControl::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::TIMEFIELD,"TextBox"},
{&OCX_FieldControl::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::NUMERICFIELD,"TextBox"},
{&OCX_FieldControl::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::CURRENCYFIELD,"TextBox"},
{&OCX_FieldControl::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::PATTERNFIELD,"TextBox"},
#if 0
{&OCX_FieldControl::Create,"8BD21D10-EC42-11CE-9e0d-00aa006002f3",
form::FormComponentType::FORMULAFIELD,"TextBox"},
#endif
{&OCX_ImageButton::Create,"D7053240-CE69-11CD-a777-00dd01143c57",
form::FormComponentType::IMAGEBUTTON,"CommandButton"},
{&OCX_SpinButton::Create,"79176FB0-B7F2-11CE-97ef-00aa006d2776",
form::FormComponentType::SPINBUTTON,"SpinButton"},
{&OCX_ScrollBar::Create,"DFD181E0-5E2F-11CE-a449-00aa004a803d",
form::FormComponentType::SCROLLBAR,"ScrollBar"},
{&OCX_GroupBox::Create,"",
form::FormComponentType::GROUPBOX,""},
{&OCX_ProgressBar::Create,"",
form::FormComponentType::CONTROL,""}
};
const int NO_OCX = sizeof( aOCXTab ) / sizeof( *aOCXTab );
SvxMSConvertOCXControls::SvxMSConvertOCXControls(SfxObjectShell *pDSh, SwPaM *pP) :
pDocSh(pDSh), pPaM(pP), nEdit(0), nCheckbox(0)
{
DBG_ASSERT( pDocSh, "No DocShell, Cannot do Controls" );
OCX_Control::FillSystemColors();
}
SvxMSConvertOCXControls::~SvxMSConvertOCXControls()
{
}
OCX_Control * SvxMSConvertOCXControls::OCX_Factory(const String &sName)
{
for (int i=0;i<NO_OCX;i++)
{
if ( sName.EqualsIgnoreCaseAscii( aOCXTab[i].sId ))
return(aOCXTab[i].pCreate());
}
return(NULL);
}
OCX_Control * SvxMSConvertOCXControls::OCX_Factory(
const uno::Reference< awt::XControlModel > &rControlModel,
String &rId, String &rName)
{
rName.Erase();
rId.Erase();
uno::Reference< beans::XPropertySet > xPropSet(
rControlModel,uno::UNO_QUERY);
uno::Any aTmp = xPropSet->getPropertyValue(
OUString::createFromAscii("ClassId"));
sal_Int16 nClassId = *(sal_Int16*) aTmp.getValue();
//Begin nasty hack
/*
There is a truly horrible thing with EditControls and FormattedField
Controls, they both pretend to have an EDITBOX ClassId for compability
reasons, at some stage in the future hopefully there will be a proper
FormulaField ClassId rather than this piggybacking two controls onto the
same ClassId, when this happens uncomment the FORMULAFIELD in the OCX_Tab
and delete this block, cmc.
And also the nClassId for ImageControls is being reported as "CONTROL"
rather than IMAGECONTROL
*/
if (nClassId == form::FormComponentType::TEXTFIELD)
{
uno::Reference< lang::XServiceInfo > xInfo(rControlModel,
uno::UNO_QUERY);
if (xInfo->
supportsService(OUString::createFromAscii(
"com.sun.star.form.component.FormattedField")))
{
rId.AppendAscii("8BD21D10-EC42-11CE-9e0d-00aa006002f3");
rName.AppendAscii("TextBox");
return new OCX_FieldControl;
}
}
else if (nClassId == form::FormComponentType::CONTROL)
{
uno::Reference< lang::XServiceInfo > xInfo(rControlModel,
uno::UNO_QUERY);
if (xInfo->
supportsService(OUString::createFromAscii(
"com.sun.star.form.component.ImageControl")))
nClassId = form::FormComponentType::IMAGECONTROL;
}
//End nasty hack
const OCX_map* pEntry = 0;
// distinguish between push button and toggle button
if( nClassId == form::FormComponentType::COMMANDBUTTON )
{
pEntry = any2bool(xPropSet->getPropertyValue(WW8_ASCII2STR("Toggle"))) ?
(aOCXTab + 1) : aOCXTab;
}
else
{
for( int i = 2; (i < NO_OCX) && !pEntry; ++i )
if( nClassId == aOCXTab[ i ].nId )
pEntry = aOCXTab + i;
}
if( pEntry )
{
rId.AppendAscii( pEntry->sId );
rName.AppendAscii( pEntry->sName );
return pEntry->pCreate();
}
return 0;
}
sal_Bool SvxMSConvertOCXControls::ReadOCXStream( SvStorageRef& rSrc1,
uno::Reference < drawing::XShape > *pShapeRef,sal_Bool bFloatingCtrl)
{
SvStorageStreamRef xCrash = rSrc1->OpenSotStream( WW8_ASCII2STR("contents") );
sal_Bool bRet=sal_False;
SvStorageStreamRef xSrc2 = rSrc1->OpenSotStream( WW8_ASCII2STR("\3OCXNAME") );
SvStorageStream* pSt = xSrc2;
pSt->SetNumberFormatInt( NUMBERFORMAT_INT_LITTLEENDIAN );
/* #117832# import control name */
OUString controlName;
bool hasCName = readOCXNAME( controlName, pSt );
xSrc2 = rSrc1->OpenSotStream( WW8_ASCII2STR("contents") );
pSt = xSrc2;
pSt->SetNumberFormatInt( NUMBERFORMAT_INT_LITTLEENDIAN );
/*Get Class Id of this object, see if it is one of the types
*that this importer can handle, call the appropiate handler
to read that control, and call the appropiate handler to
insert that control
*/
SvGlobalName aTest = rSrc1->GetClassName();
OCX_Control *pObj = OCX_Factory(aTest.GetHexName());
if (pObj)
{
pObj->pDocSh = pDocSh;
/* #117832# set imported control name */
if ( hasCName )
{
pObj->sName = controlName;
}
com::sun::star::awt::Size aSz;
uno::Reference< form::XFormComponent > xFComp;
const uno::Reference< lang::XMultiServiceFactory > & rServiceFactory =
GetServiceFactory();
if(!rServiceFactory.is())
return(sal_False);
bRet = pObj->FullRead(pSt);
if(bRet)
if (pObj->Import(rServiceFactory,xFComp,aSz))
bRet = InsertControl( xFComp, aSz,pShapeRef,bFloatingCtrl);
delete pObj;
}
return bRet;
}
sal_Bool SvxMSConvertOCXControls::ReadOCXExcelKludgeStream(
SvStorageStreamRef& rSrc1, uno::Reference < drawing::XShape > *
pShapeRef,sal_Bool bFloatingCtrl)
{
sal_Bool bRet=sal_False;
/*Get Class Id of this object, see if it is one of the types
*that this importer can handle, call the appropiate handler
to read that control, and call the appropiate handler to
insert that control
*/
/*The Excel Kludge is to concatenate a class id with a contents
* stream, and then concatenate all the controls together,
* This means that you should have the cnts stream wound to the
* correct location before passing the control stream in here*/
SvStream *pSt = rSrc1;
pSt->SetNumberFormatInt( NUMBERFORMAT_INT_LITTLEENDIAN );
SvGlobalName aTest;
*pSt >> aTest;
OCX_Control *pObj = OCX_Factory(aTest.GetHexName());
if (pObj)
{
com::sun::star::awt::Size aSz;
uno::Reference< form::XFormComponent > xFComp;
const uno::Reference< lang::XMultiServiceFactory > & rServiceFactory =
GetServiceFactory();
if(!rServiceFactory.is())
return(sal_False);
bRet = pObj->FullRead(rSrc1);
if(bRet)
if (pObj->Import(rServiceFactory,xFComp,aSz))
bRet = InsertControl( xFComp, aSz,pShapeRef,bFloatingCtrl);
delete pObj;
}
return bRet;
}
sal_Bool SvxMSConvertOCXControls::WriteOCXStream( SvStorageRef& rSrc1,
const uno::Reference< awt::XControlModel > &rControlModel,
const awt::Size &rSize, String &rName)
{
sal_Bool bRet=sal_False;
DBG_ASSERT( rControlModel.is(), "UNO-Control missing Model, panic!" );
if( !rControlModel.is() )
return sal_False;
#if 0
uno::Any aTmp = xPropSet->getPropertyValue(
OUString::createFromAscii("ClassId"));
sal_Int16 nClassId = *(sal_Int16*) aTmp.getValue();
#endif
String sId;
OCX_Control *pObj = OCX_Factory(rControlModel,sId,rName);
if (pObj != NULL)
{
uno::Reference<beans::XPropertySet> xPropSet(rControlModel,
uno::UNO_QUERY);
/* #117832# - also enable export of control name */
OUString sCName;
xPropSet->getPropertyValue(C2S("Name")) >>= sCName;
pObj->sName = sCName;
SvGlobalName aName;
aName.MakeId(sId);
String sFullName(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM(
"Microsoft Forms 2.0 ")));
sFullName.Append(rName);
rSrc1->SetClass(aName,0x5C,sFullName);
// ^^^^, this pathetic 0x5c is the magic number
// which the lack of originally blocked the implementation of
// the controls export
// cmc
bRet = pObj->Export(rSrc1,xPropSet,rSize);
SvStorageStreamRef xStor2( rSrc1->OpenSotStream( WW8_ASCII2STR("\3OCXNAME")));
/* #117832# - also enable export of control name */
writeOCXNAME( sCName, xStor2 );
delete pObj;
}
return bRet;
}
//I think this should work for excel documents, create the "Ctls" stream
//and give it here as rContents, we'll append out streams ole id and
//contents here and that appears to be what Excel is doing
sal_Bool SvxMSConvertOCXControls::WriteOCXExcelKludgeStream(
SvStorageStreamRef& rContents,
const uno::Reference< awt::XControlModel > &rControlModel,
const awt::Size &rSize, String &rName)
{
sal_Bool bRet=sal_False;
DBG_ASSERT( rControlModel.is(), "UNO-Control missing Model, panic!" );
if( !rControlModel.is() )
return sal_False;
String sId;
OCX_Control *pObj = OCX_Factory(rControlModel,sId,rName);
if (pObj != NULL)
{
uno::Reference<beans::XPropertySet> xPropSet(rControlModel,
uno::UNO_QUERY);
SvGlobalName aName;
aName.MakeId(sId);
String sFullName(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM(
"Microsoft Forms 2.0 ")));
sFullName.Append(rName);
SvStream *pS=rContents;
*pS << aName;
bRet = pObj->WriteContents(rContents,xPropSet,rSize);
delete pObj;
// export needs correct stream position
rContents->Seek( STREAM_SEEK_TO_END );
}
return bRet;
}
sal_Bool OCX_CheckBox::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
// background color: fBackStyle==0 -> transparent
if( fBackStyle )
aTmp <<= ImportColor(mnBackColor);
else
aTmp = uno::Any();
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
sal_Bool bTemp;
if ((!(fEnabled)) || (fLocked))
bTemp = sal_False;
else
bTemp = sal_True;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
bTemp = fWordWrap != 0;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("MultiLine"), aTmp);
aTmp <<= ImportColor(mnForeColor);
rPropSet->setPropertyValue( WW8_ASCII2STR("TextColor"), aTmp);
bTemp = nMultiState;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("TriState"), aTmp);
aTmp <<= ImportSpecEffect( nSpecialEffect );
rPropSet->setPropertyValue( WW8_ASCII2STR("VisualEffect"), aTmp);
if (pValue && !bSetInDialog)
{
sal_Int16 nTmp=pValue[0]-0x30;
aTmp <<= nTmp;
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultState"), aTmp);
}
if (pCaption)
{
aTmp <<= lclCreateOUString( pCaption, nCaptionLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("Label"), aTmp);
}
// #i40279# always centered vertically
aTmp <<= ::com::sun::star::style::VerticalAlignment_MIDDLE;
rPropSet->setPropertyValue( WW8_ASCII2STR("VerticalAlign"), aTmp );
aFontData.Import(rPropSet);
return(sal_True);
}
sal_Bool OCX_CheckBox::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(12);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x01;
pBlockFlags[2] = 0;
pBlockFlags[3] = 0x80;
pBlockFlags[4] = 0;
pBlockFlags[5] = 0;
pBlockFlags[6] = 0;
pBlockFlags[7] = 0;
uno::Any aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("BackgroundColor"));
fBackStyle = aTmp.hasValue() ? 1 : 0;
if (fBackStyle)
aTmp >>= mnBackColor;
sal_uInt8 nTemp=fEnabled;
if (fEnabled)
nTemp = nTemp << 1;
if (fBackStyle)
nTemp |= 0x08;
*rContents << nTemp;
pBlockFlags[0] |= 0x01;
*rContents << sal_uInt8(0x00);
nTemp = 0;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("MultiLine"));
fWordWrap = any2bool(aTmp);
if (fWordWrap)
nTemp |= 0x80;
*rContents << nTemp;
*rContents << sal_uInt8(0x00);
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x02;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TextColor"));
if (aTmp.hasValue())
aTmp >>= mnForeColor;
*rContents << ExportColor(mnForeColor);
pBlockFlags[0] |= 0x04;
nStyle = 4;
*rContents << nStyle;
pBlockFlags[0] |= 0x40;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("TriState"));
nMultiState = any2bool(aTmp);
*rContents << nMultiState;
pBlockFlags[2] |= 0x20;
WriteAlign(rContents,4);
nValueLen = 1|SVX_MSOCX_COMPRESSED;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("DefaultState"));
sal_Int16 nDefault = sal_Int16();
aTmp >>= nDefault;
*rContents << nValueLen;
pBlockFlags[2] |= 0x40;
SvxOcxString aCaption( rPropSet->getPropertyValue(WW8_ASCII2STR("Label")) );
aCaption.WriteLenField( *rContents );
if (aCaption.HasData())
pBlockFlags[2] |= 0x80;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("VisualEffect"));
if (aTmp.hasValue())
{
sal_Int16 nApiSpecEffect = sal_Int16();
aTmp >>= nApiSpecEffect;
nSpecialEffect = ExportSpecEffect( nApiSpecEffect );
}
WriteAlign(rContents,4);
*rContents << nSpecialEffect;
pBlockFlags[3] |= 0x04;
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
nDefault += 0x30;
*rContents << sal_uInt8(nDefault);
*rContents << sal_uInt8(0x00);
aCaption.WriteCharArray( *rContents );
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
bRet = aFontData.Export(rContents,rPropSet);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
*rContents << pBlockFlags[4];
*rContents << pBlockFlags[5];
*rContents << pBlockFlags[6];
*rContents << pBlockFlags[7];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_CheckBox::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x40, 0x1D, 0xD2, 0x8B,
0x42, 0xEC, 0xCE, 0x11, 0x9E, 0x0D, 0x00, 0xAA,
0x00, 0x60, 0x02, 0xF3, 0x1D, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x43, 0x68, 0x65, 0x63,
0x6B, 0x42, 0x6F, 0x78, 0x00, 0x10, 0x00, 0x00,
0x00, 0x45, 0x6D, 0x62, 0x65, 0x64, 0x64, 0x65,
0x64, 0x20, 0x4F, 0x62, 0x6A, 0x65, 0x63, 0x74,
0x00, 0x11, 0x00, 0x00, 0x00, 0x46, 0x6F, 0x72,
0x6D, 0x73, 0x2E, 0x43, 0x68, 0x65, 0x63, 0x6B,
0x42, 0x6F, 0x78, 0x2E, 0x31, 0x00, 0xF4, 0x39,
0xB2, 0x71, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x43, 0x00, 0x68, 0x00, 0x65, 0x00, 0x63, 0x00,
0x6B, 0x00, 0x42, 0x00, 0x6F, 0x00, 0x78, 0x00,
0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
/*
static sal_uInt8 __READONLY_DATA aTest[] = {
0x00, 0x02, 0x34, 0x00, 0x46, 0x01, 0xC0, 0x80,
0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00,
0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
0x01, 0x00, 0x00, 0x80, 0x09, 0x00, 0x00, 0x80,
0xE2, 0x0E, 0x00, 0x00, 0x95, 0x02, 0x00, 0x00,
0x30, 0x69, 0x1D, 0x00, 0x43, 0x68, 0x65, 0x63,
0x6B, 0x42, 0x6F, 0x78, 0x31, 0x20, 0x52, 0x6F,
0x00, 0x02, 0x20, 0x00, 0x35, 0x00, 0x00, 0x00,
0x0F, 0x00, 0x00, 0x80, 0xC3, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x54, 0x69, 0x6D, 0x65,
0x73, 0x20, 0x4E, 0x65, 0x77, 0x20, 0x52, 0x6F,
0x6D, 0x61, 0x6E, 0x00,
};
*/
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_FontData::Read(SvStorageStream *pS)
{
long nStart = pS->Tell();
*pS >> nIdentifier;
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags,4);
bool bFontName = (pBlockFlags[0] & 0x01) != 0;
if (bFontName)
*pS >> nFontNameLen;
if (pBlockFlags[0] & 0x02)
{
sal_uInt8 nTmp;
*pS >> nTmp;
fBold = nTmp & 0x01;
fItalic = (nTmp & 0x02) >> 1;
fUnderline = (nTmp & 0x04) >> 2;
fStrike = (nTmp & 0x08) >> 3;
fUnknown1 = (nTmp & 0xF0) >> 4;
*pS >> nUnknown2;
*pS >> nUnknown3;
*pS >> nUnknown4;
}
if (pBlockFlags[0] & 0x04)
{
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nFontSize;
}
else
nFontSize = 240;
if (pBlockFlags[0] & 0x10)
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nLanguageID;
}
if (pBlockFlags[0] & 0x40)
{
*pS >> nJustification;
}
if (pBlockFlags[0] & 0x80) // font weight before font name
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nFontWeight;
}
if (bFontName)
lclReadCharArray( *pS, pFontName, nFontNameLen, pS->Tell() - nStart);
ReadAlign(pS, pS->Tell() - nStart, 4);
return(sal_True);
}
void OCX_FontData::Import(uno::Reference< beans::XPropertySet > &rPropSet)
{
uno::Any aTmp;
if (pFontName)
{
aTmp <<= lclCreateOUString( pFontName, nFontNameLen );
rPropSet->setPropertyValue( WW8_ASCII2STR("FontName"), aTmp);
}
if (bHasAlign)
{
sal_Int16 nAlign = ImportAlign(nJustification);
aTmp <<= nAlign;
rPropSet->setPropertyValue( WW8_ASCII2STR("Align"), aTmp);
}
if (fBold)
{
aTmp <<= awt::FontWeight::BOLD;
rPropSet->setPropertyValue( WW8_ASCII2STR("FontWeight"), aTmp);
}
if (fItalic)
{
aTmp <<= (sal_Int16)awt::FontSlant_ITALIC;
rPropSet->setPropertyValue( WW8_ASCII2STR("FontSlant"), aTmp);
}
if (fUnderline)
{
aTmp <<= awt::FontUnderline::SINGLE;
rPropSet->setPropertyValue( WW8_ASCII2STR("FontUnderline"), aTmp);
}
if (fStrike)
{
aTmp <<= awt::FontStrikeout::SINGLE;
rPropSet->setPropertyValue( WW8_ASCII2STR("FontStrikeout"), aTmp);
}
// 2004-09-17: very strange way of storing font sizes...
// 1pt->30, 2pt->45, 3pt->60, 4pt->75, 5pt->105, 6pt->120, 7pt->135
// 8pt->165, 9pt->180, 10pt->195, 11pt->225, ...
aTmp <<= sal_Int16( (nFontSize <= 30) ? 1 : ((nFontSize + 10) / 20) );
rPropSet->setPropertyValue( WW8_ASCII2STR("FontHeight"), aTmp);
}
sal_Bool OCX_FontData::Export(SvStorageStreamRef &rContent,
const uno::Reference< beans::XPropertySet > &rPropSet)
{
sal_uInt8 nFlags=0x00;
sal_uInt32 nOldPos = rContent->Tell();
rContent->SeekRel(8);
SvxOcxString aFontName;
uno::Any aTmp;
if (bHasFont)
aFontName = rPropSet->getPropertyValue(WW8_ASCII2STR("FontName"));
if (!aFontName.HasData())
aFontName = OUString( RTL_CONSTASCII_USTRINGPARAM( "Times New Roman" ) );
aFontName.WriteLenField( *rContent );
nFlags |= 0x01;
if (bHasFont)
{
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("FontWeight"));
//Export font related props
if ( aTmp.hasValue() )
{
float nBold = 0.0;
aTmp >>= nBold;
if ( nBold >= 150 )
fBold = 1;
}
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("FontSlant"));
if ( aTmp.hasValue() )
{
short eItalic = 0 ;
aTmp >>= eItalic ;
if ( eItalic == awt::FontSlant_ITALIC )
fItalic = 1;
}
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("FontUnderline"));
if ( aTmp.hasValue() )
{
short eUnderline = 0 ;
aTmp >>= eUnderline;
if ( eUnderline == awt::FontUnderline::SINGLE )
fUnderline = 1;
}
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("FontStrikeout"));
if ( aTmp.hasValue() )
{
short eLtStrikeout = 0;
aTmp >>= eLtStrikeout;
if ( eLtStrikeout == awt::FontStrikeout::SINGLE )
fStrike = 1;
}
sal_uInt8 nTmp= 1 * fBold + 2* fItalic + 4* fUnderline + 8 * fStrike;
if ( nTmp > 0 )
{
nFlags |= 0x02;
*rContent << nTmp;
nTmp=0x00;
*rContent << nTmp;
*rContent << nTmp;
*rContent << nTmp;
}
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("FontHeight"));
float nFontHeight = 0;
aTmp >>= nFontHeight;
if (nFontHeight)
{
nFlags |= 0x04;
// 2004-09-17: very strange way of storing font sizes:
// 1pt->30, 2pt->45, 3pt->60, 4pt->75, 5pt->105, 6pt->120, 7pt->135
// 8pt->165, 9pt->180, 10pt->195, 11pt->225, ...
nFontSize = (nFontHeight == 1) ? 30 : (static_cast<sal_uInt32>((nFontHeight*4+1)/3)*15);
*rContent << nFontSize;
}
if (bHasAlign)
{
*rContent << sal_uInt16(0x0200);
nFlags |= 0x10;
nFlags |= 0x20; // ?
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Align"));
nFlags |= 0x40;
sal_Int16 nAlign = nDefaultAlign;
if (aTmp.hasValue())
aTmp >>= nAlign;
nJustification = ExportAlign(nAlign);
*rContent << nJustification;
}
}
aFontName.WriteCharArray( *rContent );
WriteAlign(rContent,4);
sal_uInt16 nFixedAreaLn = static_cast<sal_uInt16>(rContent->Tell()-nOldPos-4);
rContent->Seek(nOldPos);
*rContent << nStandardId;
*rContent << nFixedAreaLn;
*rContent << nFlags;
*rContent << sal_uInt8(0x00);
*rContent << sal_uInt8(0x00);
*rContent << sal_uInt8(0x00);
WriteAlign(rContent,4);
return sal_True;
}
// Doesn't really read anything but just skips the
// record.
sal_Bool OCX_TabStrip::Read(SotStorageStream *pS)
{
const long skipLen = 0x18;
*pS >> nIdentifier;
DBG_ASSERT(nStandardId==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags, sizeof(pBlockFlags));
pS->SeekRel(skipLen);
*pS >> nNumTabs;
// skip to end of control
pS->SeekRel(nFixedAreaLen - sizeof(pBlockFlags) - sizeof(nNumTabs) - skipLen );
return sal_True;
}
sal_Bool OCX_TabStrip::ReadFontData(SotStorageStream *pS)
{
// Seems like there is a real font record followed by
// a number of blank records ( e.g. nFixedAreaLen = 0 )
// The number of trailing blank records is equal to the number of tabs
OCX_Control::ReadFontData(pS);
for ( sal_uInt16 index = 0; index < nNumTabs; index++ )
{
OCX_Control::Read(pS); // read trailing records
}
return sal_True;
}
sal_Bool OCX_Image::Read(SotStorageStream *pS)
{
if ( !bSetInDialog )
{
// preserve the present behavior at the moment.
// only import image control for UserForms
return sal_False;
}
sal_uLong nStart = pS->Tell();
*pS >> nIdentifier;
DBG_ASSERT(nStandardId==nIdentifier,
"A control that has a different identifier");
*pS >> nFixedAreaLen;
pS->Read(pBlockFlags, sizeof(pBlockFlags));
bool hasEmbeddedImage = false;
if ( pBlockFlags[0] & 0x04 )
{
bAutoSize = true;
}
if ( pBlockFlags[0] & 0x08 )
{
*pS >> nBorderColor;
}
if ( pBlockFlags[0] & 0x10 )
{
*pS >> mnBackColor;
}
if ( pBlockFlags[0] & 0x20 )
{
*pS >> nBorderStyle;
}
if ( pBlockFlags[0] & 0x40 )
{
*pS >> nMousePointer;
}
if ( pBlockFlags[0] & 0x80 )
{
*pS >> nPictureSizeMode;
}
if ( pBlockFlags[ 1 ] & 0x1 )
{
*pS >> nSpecialEffect;
}
// investigate if valid also for formcontrols, although for controls
// images themselves seem to come through from escher ( as shape, think
// its probably a preview? )
// np a bit of a guess ( until proved incorrect )
if ( pBlockFlags[ 1 ] & 0x4 )
{
ReadAlign(pS, pS->Tell() - nStart, 2);
hasEmbeddedImage = true;
sal_uInt16 unknown;
*pS >> unknown;
}
if ( pBlockFlags[ 1 ] & 0x8 )
{
ReadAlign(pS, pS->Tell() - nStart, 2);
*pS >> nPictureAlignment;
}
if ( pBlockFlags[ 1 ] & 0x10 )
{
bPictureTiling = true;
}
if ( pBlockFlags[1] & 0x20 )
{
ReadAlign(pS, pS->Tell() - nStart, 4);
sal_uInt8 nTemp;
*pS >> nTemp;
fEnabled = (nTemp&0x02)>>1;
fBackStyle = (nTemp&0x08)>>3;
// padding?
*pS >> nTemp;
*pS >> nTemp;
*pS >> nTemp;
}
ReadAlign(pS, pS->Tell() - nStart, 4);
*pS >> nWidth;
*pS >> nHeight;
if ( hasEmbeddedImage )
{
//image follows this block
//len of image is 0x14 relative to end of this block
pS->Seek( pS->Tell() + 0x14 );
sal_uInt32 nImageLen = 0;
*pS >> nImageLen;
long imagePos = pS->Tell();
pS->Seek( imagePos );
sImageUrl = C2U("vnd.sun.star.expand:${$OOO_BASE_DIR/program/") + C2U( SAL_CONFIGFILE( "bootstrap" ) ) + C2U("::UserInstallation}/user/temp/") + sName;
sal_uInt8* pImage = new sal_uInt8[ nImageLen ];
pS->Read(pImage, nImageLen);
bool result = storePictureInFileSystem( sImageUrl, pImage, nImageLen );
OUString pictName = sImageUrl.copy( sImageUrl.lastIndexOf('/') + 1 );
result = storePictureInDoc( pDocSh, pictName, pImage, nImageLen );
delete [] pImage;
}
return sal_True;
}
sal_Bool OCX_Image::Import( uno::Reference< beans::XPropertySet > &rPropSet )
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
if( fBackStyle )
aTmp <<= ImportColor(mnBackColor);
else
aTmp = uno::Any();
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
sal_Bool bTemp;
if (fEnabled)
bTemp = sal_True;
else
bTemp = sal_False;
aTmp = bool2any(bTemp);
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
if ( sImageUrl.getLength() )
{
aTmp <<= sImageUrl;
rPropSet->setPropertyValue( WW8_ASCII2STR("ImageURL"), aTmp);
}
return sal_True;
}
sal_Bool OCX_Image::WriteContents(SvStorageStreamRef &rContents,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
sal_Bool bRet=sal_True;
sal_uInt32 nOldPos = rContents->Tell();
rContents->SeekRel(8);
pBlockFlags[0] = 0;
pBlockFlags[1] = 0x02;
pBlockFlags[2] = 0;
pBlockFlags[3] = 0;
uno::Any aTmp = rPropSet->getPropertyValue(
WW8_ASCII2STR("BackgroundColor"));
if (aTmp.hasValue())
aTmp >>= mnBackColor;
*rContents << ExportColor(mnBackColor);
pBlockFlags[0] |= 0x10;
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Border"));
sal_Int16 nBorder = sal_Int16();
aTmp >>= nBorder;
nSpecialEffect = ExportBorder(nBorder,nBorderStyle);
*rContents << nBorderStyle;
pBlockFlags[0] |= 0x20;
*rContents << nSpecialEffect;
pBlockFlags[1] |= 0x01;
WriteAlign(rContents,4);
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("Enabled"));
fEnabled = any2bool(aTmp);
if (fEnabled)
{
sal_uInt8 nTemp = 0x19;
*rContents << nTemp;
pBlockFlags[1] |= 0x20;
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
*rContents << sal_uInt8(0x00);
}
aTmp = rPropSet->getPropertyValue(WW8_ASCII2STR("ImageURL"));
// OUString *pStr = (OUString *)aTmp.getValue();
/*Magically fetch that image and turn it into something that
*we can store in ms controls, wmf,png,jpg are almost certainly
*the options we have for export...*/
WriteAlign(rContents,4);
*rContents << rSize.Width;
*rContents << rSize.Height;
WriteAlign(rContents,4);
nFixedAreaLen = static_cast<sal_uInt16>(rContents->Tell()-nOldPos-4);
rContents->Seek(nOldPos);
*rContents << nStandardId;
*rContents << nFixedAreaLen;
*rContents << pBlockFlags[0];
*rContents << pBlockFlags[1];
*rContents << pBlockFlags[2];
*rContents << pBlockFlags[3];
DBG_ASSERT((rContents.Is() &&
(SVSTREAM_OK==rContents->GetError())),"damn");
return bRet;
}
sal_Bool OCX_Image::Export(SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet > &rPropSet,
const awt::Size &rSize)
{
static sal_uInt8 __READONLY_DATA aCompObj[] = {
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0x41, 0x92, 0x59, 0x4C,
0x26, 0x69, 0x1B, 0x10, 0x99, 0x92, 0x00, 0x00,
0x0B, 0x65, 0xC6, 0xF9, 0x1A, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x49, 0x6D, 0x61, 0x67,
0x65, 0x00, 0x10, 0x00, 0x00, 0x00, 0x45, 0x6D,
0x62, 0x65, 0x64, 0x64, 0x65, 0x64, 0x20, 0x4F,
0x62, 0x6A, 0x65, 0x63, 0x74, 0x00, 0x0E, 0x00,
0x00, 0x00, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x2E,
0x49, 0x6D, 0x61, 0x67, 0x65, 0x2E, 0x31, 0x00,
0xF4, 0x39, 0xB2, 0x71, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] = {
0x49, 0x00, 0x6D, 0x00, 0x61, 0x00, 0x67, 0x00,
0x65, 0x00, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
// ============================================================================
OCX_SpinButton::OCX_SpinButton() :
OCX_Control( OUString( RTL_CONSTASCII_USTRINGPARAM( "SpinButton" ) ) ),
mnBlockFlags( 0 ),
mnValue( 0 ),
mnMin( 0 ),
mnMax( 100 ),
mnSmallStep( 1 ),
mnPageStep( 1 ),
mnOrient( -1 ),
mnDelay( 50 ),
mbEnabled( true ),
mbLocked( false ),
mbPropThumb( true )
{
msFormType = C2U("com.sun.star.form.component.SpinButton");
msDialogType = C2U("com.sun.star.awt.UnoControlSpinButtonModel");
mnBackColor = 0x8000000F;
mnForeColor = 0x80000012;
}
OCX_Control* OCX_SpinButton::Create()
{
return new OCX_SpinButton;
}
sal_Bool OCX_SpinButton::Read( SvStorageStream *pS )
{
if( !pS ) return sal_False;
SvStream& rStrm = *pS;
sal_uInt16 nId, nSize;
sal_Int32 nIcon = 0;
rStrm >> nId >> nSize >> mnBlockFlags;
DBG_ASSERT( nStandardId == nId, "OCX_SpinButton::Read - unknown identifier" );
if( mnBlockFlags & 0x00000001 ) rStrm >> mnForeColor;
if( mnBlockFlags & 0x00000002 ) rStrm >> mnBackColor;
if( mnBlockFlags & 0x00000004 )
{
sal_Int32 nFlags;
rStrm >> nFlags;
mbEnabled = (nFlags & 0x00000002) != 0;
mbLocked = (nFlags & 0x00000004) != 0;
}
if( mnBlockFlags & 0x00000010 ) rStrm.SeekRel( 4 ); // mouse pointer
if( mnBlockFlags & 0x00000020 ) rStrm >> mnMin;
if( mnBlockFlags & 0x00000040 ) rStrm >> mnMax;
if( mnBlockFlags & 0x00000080 ) rStrm >> mnValue;
if( mnBlockFlags & 0x00000100 ) rStrm.SeekRel( 4 ); // unknown
if( mnBlockFlags & 0x00000200 ) rStrm.SeekRel( 4 ); // unknown
if( mnBlockFlags & 0x00000400 ) rStrm.SeekRel( 4 ); // unknown
if( mnBlockFlags & 0x00000800 ) rStrm >> mnSmallStep;
if( mnBlockFlags & 0x00001000 ) rStrm >> mnPageStep;
if( mnBlockFlags & 0x00002000 ) rStrm >> mnOrient;
if( mnBlockFlags & 0x00004000 )
{
sal_Int32 nThumb;
*pS >> nThumb;
mbPropThumb = nThumb != 0;
}
if( mnBlockFlags & 0x00008000 ) rStrm >> mnDelay;
if( mnBlockFlags & 0x00010000 ) rStrm >> nIcon;
if( mnBlockFlags & 0x00000008 ) rStrm >> nWidth >> nHeight;
if( nIcon )
{
sal_Int32 nIconSize;
pS->SeekRel( 20 );
*pS >> nIconSize;
pS->SeekRel( nIconSize );
}
return sal_True;
}
sal_Bool OCX_SpinButton::ReadFontData( SvStorageStream* /* pS */ )
{
// spin buttons and scroll bars do not support font data
return sal_True;
}
sal_Bool OCX_SpinButton::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
if( (nWidth < 1) || (nHeight < 1) )
return sal_False;
uno::Any aTmp( &sName, getCppuType((OUString *)0) );
rPropSet->setPropertyValue( WW8_ASCII2STR( "Name" ), aTmp );
aTmp <<= ImportColor( mnForeColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("SymbolColor"), aTmp);
aTmp <<= ImportColor( mnBackColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp = bool2any( mbEnabled && !mbLocked );
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
aTmp <<= mnValue;
if ( bSetInDialog )
{
rPropSet->setPropertyValue( WW8_ASCII2STR("SpinValue"), aTmp );
}
else
{
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultSpinValue"), aTmp );
}
aTmp <<= mnMin;
rPropSet->setPropertyValue( WW8_ASCII2STR("SpinValueMin"), aTmp );
aTmp <<= mnMax;
rPropSet->setPropertyValue( WW8_ASCII2STR("SpinValueMax"), aTmp );
aTmp <<= mnSmallStep;
rPropSet->setPropertyValue( WW8_ASCII2STR("SpinIncrement"), aTmp );
namespace AwtScrollOrient = ::com::sun::star::awt::ScrollBarOrientation;
switch( mnOrient )
{
case 0: aTmp <<= AwtScrollOrient::VERTICAL; break;
case 1: aTmp <<= AwtScrollOrient::HORIZONTAL; break;
default: aTmp <<= (nWidth < nHeight) ? AwtScrollOrient::VERTICAL : AwtScrollOrient::HORIZONTAL;
}
rPropSet->setPropertyValue( WW8_ASCII2STR("Orientation"), aTmp );
aTmp = bool2any( true );
rPropSet->setPropertyValue( WW8_ASCII2STR("Repeat"), aTmp );
aTmp <<= mnDelay;
rPropSet->setPropertyValue( WW8_ASCII2STR("RepeatDelay"), aTmp );
aTmp <<= sal_Int16( 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR("Border"), aTmp);
return sal_True;
}
sal_Bool OCX_SpinButton::Export(
SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet>& rPropSet,
const awt::Size& rSize )
{
static sal_uInt8 __READONLY_DATA aCompObj[] =
{
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0xB0, 0x6F, 0x17, 0x79,
0xF2, 0xB7, 0xCE, 0x11, 0x97, 0xEF, 0x00, 0xAA,
0x00, 0x6D, 0x27, 0x76, 0x1F, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x53, 0x70, 0x69, 0x6E,
0x42, 0x75, 0x74, 0x74, 0x6F, 0x6E, 0x00, 0x10,
0x00, 0x00, 0x00, 0x45, 0x6D, 0x62, 0x65, 0x64,
0x64, 0x65, 0x64, 0x20, 0x4F, 0x62, 0x6A, 0x65,
0x63, 0x74, 0x00, 0x13, 0x00, 0x00, 0x00, 0x46,
0x6F, 0x72, 0x6D, 0x73, 0x2E, 0x53, 0x70, 0x69,//Add those to avoid MS crash when open
0x6E, 0x42, 0x75, 0x74, 0x74, 0x6F, 0x6E, 0x2E,
0x31, 0x00, 0xF4, 0x39, 0xB2, 0x71, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] =
{
0x53, 0x00, 0x70, 0x00, 0x69, 0x00, 0x6E, 0x00,
0x42, 0x00, 0x75, 0x00, 0x74, 0x00, 0x74, 0x00,
0x6F, 0x00, 0x6E, 0x00, 0x31, 0x00, 0x00, 0x00,
0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_SpinButton::WriteContents(
SvStorageStreamRef &rObj,
const uno::Reference< beans::XPropertySet> &rPropSet,
const awt::Size& rSize )
{
if( !rObj.Is() )
return sal_False;
mnBlockFlags = 0x00000008;
nWidth = rSize.Width;
nHeight = rSize.Height;
GetInt32Property( mnForeColor, rPropSet, WW8_ASCII2STR( "SymbolColor" ), 0x00000001 );
GetInt32Property( mnBackColor, rPropSet, WW8_ASCII2STR( "BackgroundColor" ), 0x00000002 );
GetBoolProperty( mbEnabled, rPropSet, WW8_ASCII2STR( "Enabled" ), 0x00000304 );
GetInt32Property( mnMin, rPropSet, WW8_ASCII2STR( "SpinValueMin" ), 0x00000020 );
GetInt32Property( mnMax, rPropSet, WW8_ASCII2STR( "SpinValueMax" ), 0x00000040 );
GetInt32Property( mnValue, rPropSet, WW8_ASCII2STR( "SpinValue" ), 0x00000080 );
GetInt32Property( mnSmallStep, rPropSet, WW8_ASCII2STR( "SpinIncrement" ), 0x00000800 );
GetInt32Property( mnDelay, rPropSet, WW8_ASCII2STR( "RepeatDelay" ), 0x00008000 );
namespace AwtScrollOrient = ::com::sun::star::awt::ScrollBarOrientation;
sal_Int16 nApiOrient = sal_Int16();
if( rPropSet->getPropertyValue( WW8_ASCII2STR( "Orientation" ) ) >>= nApiOrient )
UpdateInt32Property( mnOrient, (nApiOrient == AwtScrollOrient::VERTICAL) ? 0 : 1, 0x00002000 );
return WriteData( *rObj );
}
void OCX_SpinButton::UpdateInt32Property(
sal_Int32& rnCoreValue, sal_Int32 nNewValue, sal_Int32 nBlockFlag )
{
if( nNewValue != rnCoreValue )
{
rnCoreValue = nNewValue;
mnBlockFlags |= nBlockFlag;
}
}
void OCX_SpinButton::GetInt32Property(
sal_Int32& rnCoreValue, const uno::Reference< beans::XPropertySet>& rxPropSet,
const OUString& rPropName, sal_Int32 nBlockFlag )
{
sal_Int32 nNewValue = 0;
if( rxPropSet->getPropertyValue( rPropName ) >>= nNewValue )
UpdateInt32Property( rnCoreValue, nNewValue, nBlockFlag );
}
void OCX_SpinButton::UpdateBoolProperty(
bool& rbCoreValue, bool bNewValue, sal_Int32 nBlockFlag )
{
if( bNewValue != rbCoreValue )
{
rbCoreValue = bNewValue;
mnBlockFlags |= nBlockFlag;
}
}
void OCX_SpinButton::GetBoolProperty(
bool& rbCoreValue, const uno::Reference< beans::XPropertySet>& rxPropSet,
const OUString& rPropName, sal_Int32 nBlockFlag )
{
UpdateBoolProperty( rbCoreValue,
any2bool( rxPropSet->getPropertyValue( rPropName ) ), nBlockFlag );
}
sal_Bool OCX_SpinButton::WriteData( SvStream& rStrm ) const
{
sal_Bool bRet = sal_True;
sal_uLong nStartPos = rStrm.Tell();
rStrm << sal_Int32( 0 ) << mnBlockFlags;
if( mnBlockFlags & 0x00000001 ) rStrm << ExportColor( mnForeColor );
if( mnBlockFlags & 0x00000002 ) rStrm << ExportColor( mnBackColor );
if( mnBlockFlags & 0x00000004 )
{
sal_Int32 nFlags = 0x00000019; // always set
if( mbEnabled ) nFlags |= 0x00000002;
if( mbLocked ) nFlags |= 0x00000004;
rStrm << nFlags;
}
if( mnBlockFlags & 0x00000020 ) rStrm << mnMin;
if( mnBlockFlags & 0x00000040 ) rStrm << mnMax;
if( mnBlockFlags & 0x00000080 ) rStrm << mnValue;
if( mnBlockFlags & 0x00000100 ) rStrm << sal_Int32( 0 ); // unknown
if( mnBlockFlags & 0x00000200 ) rStrm << sal_Int32( 0 ); // unknown
if( mnBlockFlags & 0x00000400 ) rStrm << sal_Int32( 0 ); // unknown
if( mnBlockFlags & 0x00000800 ) rStrm << mnSmallStep;
if( mnBlockFlags & 0x00001000 ) rStrm << mnPageStep;
if( mnBlockFlags & 0x00002000 ) rStrm << mnOrient;
if( mnBlockFlags & 0x00004000 ) rStrm << sal_Int32( mbPropThumb ? 1 : 0 );
if( mnBlockFlags & 0x00008000 ) rStrm << mnDelay;
if( mnBlockFlags & 0x00000008 ) rStrm << nWidth << nHeight;
sal_uInt16 nSize = static_cast< sal_uInt16 >( rStrm.Tell() - nStartPos - 4 );
rStrm.Seek( nStartPos );
rStrm << nStandardId << nSize;
DBG_ASSERT( rStrm.GetError() == SVSTREAM_OK, "OCX_SpinButton::WriteData - error in stream" );
return bRet;
}
// ============================================================================
OCX_ScrollBar::OCX_ScrollBar()
{
sName = OUString( RTL_CONSTASCII_USTRINGPARAM( "ScrollBar" ) );
mnMax = 32767;
msFormType = C2U("com.sun.star.form.component.ScrollBar");
msDialogType = C2U("com.sun.star.awt.UnoControlScrollBarModel");
}
OCX_Control* OCX_ScrollBar::Create()
{
return new OCX_ScrollBar;
}
sal_Bool OCX_ScrollBar::Import(com::sun::star::uno::Reference<
com::sun::star::beans::XPropertySet> &rPropSet)
{
if( (nWidth < 1) || (nHeight < 1) )
return sal_False;
uno::Any aTmp( &sName, getCppuType((OUString *)0) );
rPropSet->setPropertyValue( WW8_ASCII2STR( "Name" ), aTmp );
aTmp <<= ImportColor( mnForeColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("SymbolColor"), aTmp);
aTmp <<= ImportColor( mnBackColor );
rPropSet->setPropertyValue( WW8_ASCII2STR("BackgroundColor"), aTmp);
aTmp = bool2any( mbEnabled && !mbLocked );
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), aTmp);
aTmp <<= mnValue;
if ( bSetInDialog )
{
rPropSet->setPropertyValue( WW8_ASCII2STR("ScrollValue"), aTmp );
}
else
{
rPropSet->setPropertyValue( WW8_ASCII2STR("DefaultScrollValue"), aTmp );
}
aTmp <<= mnMin;
rPropSet->setPropertyValue( WW8_ASCII2STR("ScrollValueMin"), aTmp );
aTmp <<= mnMax;
rPropSet->setPropertyValue( WW8_ASCII2STR("ScrollValueMax"), aTmp );
aTmp <<= mnSmallStep;
rPropSet->setPropertyValue( WW8_ASCII2STR("LineIncrement"), aTmp );
aTmp <<= mnPageStep;
rPropSet->setPropertyValue( WW8_ASCII2STR("BlockIncrement"), aTmp );
if( mbPropThumb && (mnPageStep > 0) )
rPropSet->setPropertyValue( WW8_ASCII2STR("VisibleSize"), aTmp );
namespace AwtScrollOrient = ::com::sun::star::awt::ScrollBarOrientation;
switch( mnOrient )
{
case 0: aTmp <<= AwtScrollOrient::VERTICAL; break;
case 1: aTmp <<= AwtScrollOrient::HORIZONTAL; break;
default: aTmp <<= (nWidth < nHeight) ? AwtScrollOrient::VERTICAL : AwtScrollOrient::HORIZONTAL;
}
rPropSet->setPropertyValue( WW8_ASCII2STR("Orientation"), aTmp );
aTmp <<= mnDelay;
rPropSet->setPropertyValue( WW8_ASCII2STR("RepeatDelay"), aTmp );
aTmp <<= sal_Int16( 0 );
rPropSet->setPropertyValue( WW8_ASCII2STR("Border"), aTmp);
return sal_True;
}
sal_Bool OCX_ScrollBar::Export(
SvStorageRef &rObj,
const uno::Reference< beans::XPropertySet>& rPropSet,
const awt::Size& rSize )
{
static sal_uInt8 __READONLY_DATA aCompObj[] =
{
0x01, 0x00, 0xFE, 0xFF, 0x03, 0x0A, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0xE0, 0x81, 0xD1, 0xDF,
0x2F, 0x5E, 0xCE, 0x11, 0xA4, 0x49, 0x00, 0xAA,
0x00, 0x4A, 0x80, 0x3D, 0x1E, 0x00, 0x00, 0x00,
0x4D, 0x69, 0x63, 0x72, 0x6F, 0x73, 0x6F, 0x66,
0x74, 0x20, 0x46, 0x6F, 0x72, 0x6D, 0x73, 0x20,
0x32, 0x2E, 0x30, 0x20, 0x53, 0x63, 0x72, 0x6F,
0x6C, 0x6C, 0x42, 0x61, 0x72, 0x00, 0x10, 0x00,
0x00, 0x00, 0x45, 0x6D, 0x62, 0x65, 0x64, 0x64,
0x65, 0x64, 0x20, 0x4F, 0x62, 0x6A, 0x65, 0x63,
0x74, 0x00, 0x12, 0x00, 0x00, 0x00, 0x46, 0x6F,
0x72, 0x6D, 0x73, 0x2E, 0x53, 0x63, 0x72, 0x6F,
0x6C, 0x6C, 0x42, 0x61, 0x72, 0x2E, 0x31, 0x00,
0xF4, 0x39, 0xB2, 0x71, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor( rObj->OpenSotStream( C2S("\1CompObj")));
xStor->Write(aCompObj,sizeof(aCompObj));
DBG_ASSERT((xStor.Is() && (SVSTREAM_OK == xStor->GetError())),"damn");
}
{
SvStorageStreamRef xStor3( rObj->OpenSotStream( C2S("\3ObjInfo")));
xStor3->Write(aObjInfo,sizeof(aObjInfo));
DBG_ASSERT((xStor3.Is() && (SVSTREAM_OK == xStor3->GetError())),"damn");
}
static sal_uInt8 __READONLY_DATA aOCXNAME[] =
{
0x53, 0x00, 0x63, 0x00, 0x72, 0x00, 0x6F, 0x00,
0x6C, 0x00, 0x6C, 0x00, 0x42, 0x00, 0x61, 0x00,
0x72, 0x00, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00
};
{
SvStorageStreamRef xStor2( rObj->OpenSotStream( C2S("\3OCXNAME")));
xStor2->Write(aOCXNAME,sizeof(aOCXNAME));
DBG_ASSERT((xStor2.Is() && (SVSTREAM_OK == xStor2->GetError())),"damn");
}
SvStorageStreamRef xContents( rObj->OpenSotStream( C2S("contents")));
return WriteContents(xContents, rPropSet, rSize);
}
sal_Bool OCX_ScrollBar::WriteContents(
SvStorageStreamRef &rObj,
const uno::Reference< beans::XPropertySet> &rPropSet,
const awt::Size& rSize )
{
if( !rObj.Is() )
return sal_False;
mnBlockFlags = 0x00000008;
nWidth = rSize.Width;
nHeight = rSize.Height;
GetInt32Property( mnForeColor, rPropSet, WW8_ASCII2STR( "SymbolColor" ), 0x00000001 );
GetInt32Property( mnBackColor, rPropSet, WW8_ASCII2STR( "BackgroundColor" ), 0x00000002 );
GetBoolProperty( mbEnabled, rPropSet, WW8_ASCII2STR( "Enabled" ), 0x00000304 );
GetInt32Property( mnMin, rPropSet, WW8_ASCII2STR( "ScrollValueMin" ), 0x00000020 );
GetInt32Property( mnMax, rPropSet, WW8_ASCII2STR( "ScrollValueMax" ), 0x00000040 );
GetInt32Property( mnValue, rPropSet, WW8_ASCII2STR( "ScrollValue" ), 0x00000080 );
GetInt32Property( mnSmallStep, rPropSet, WW8_ASCII2STR( "LineIncrement" ), 0x00000800 );
GetInt32Property( mnPageStep, rPropSet, WW8_ASCII2STR( "BlockIncrement" ), 0x00001000 );
GetInt32Property( mnDelay, rPropSet, WW8_ASCII2STR( "RepeatDelay" ), 0x00008000 );
namespace AwtScrollOrient = ::com::sun::star::awt::ScrollBarOrientation;
sal_Int16 nApiOrient = sal_Int16();
if( rPropSet->getPropertyValue( WW8_ASCII2STR( "Orientation" ) ) >>= nApiOrient )
UpdateInt32Property( mnOrient, (nApiOrient == AwtScrollOrient::VERTICAL) ? 0 : 1, 0x00002000 );
UpdateBoolProperty( mbPropThumb, true, 0x00004000 );
return WriteData( *rObj );
}
OCX_ProgressBar::OCX_ProgressBar() :
OCX_Control( OUString( RTL_CONSTASCII_USTRINGPARAM( "ProgressBar" ) ) ),
nMin( 0 ),
nMax( 0 ),
bFixedSingle(true),
bEnabled( true ),
b3d( true )
{
msDialogType = C2U("com.sun.star.awt.UnoControlProgressBarModel");
bSetInDialog = true;
}
sal_Bool OCX_ProgressBar::Read( SvStorageStream *pS )
{
pS->SeekRel( 8 );
*pS >> nWidth >> nHeight;
pS->SeekRel( 12 );
float fMin, fMax;
*pS >> fMin >> fMax;
nMin = static_cast< sal_Int32 >( fMin );
nMax = static_cast< sal_Int32 >( fMax );
bool bVisible = true;
sal_uInt8 pUnknownFlags[4];
pS->Read(pUnknownFlags,4);
// complete guess, but we don't handle visible anyway
if ( ( pUnknownFlags[2] & 0x8 ) && ( pUnknownFlags[2] & 0x2 ) )
bVisible = false;
sal_uInt32 nFlags;
*pS >> nFlags;
// seems these work out
bFixedSingle = (nFlags & 0x01) != 0;
bEnabled = (nFlags & 0x02) != 0;
b3d = (nFlags & 0x04) != 0;
return true;
}
OCX_Control* OCX_ProgressBar::Create()
{
return new OCX_ProgressBar;
}
sal_Bool OCX_ProgressBar::Import(uno::Reference< beans::XPropertySet > &rPropSet)
{
uno::Any aTmp(&sName,getCppuType((OUString *)0));
rPropSet->setPropertyValue( WW8_ASCII2STR("Name"), aTmp );
aTmp <<= nMax;
rPropSet->setPropertyValue( WW8_ASCII2STR("ProgressValueMax"), aTmp );
aTmp <<= nMin;
rPropSet->setPropertyValue( WW8_ASCII2STR("ProgressValueMin"), aTmp );
if ( !bEnabled )
rPropSet->setPropertyValue( WW8_ASCII2STR("Enabled"), uno::makeAny( sal_False ) );
return sal_True;
}
// ============================================================================
/* vi:set tabstop=4 shiftwidth=4 expandtab: */