AOO410/main/editeng/source/editeng/editundo.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_editeng.hxx"

#include <eeng_pch.hxx>

#include <impedit.hxx>
#include <editundo.hxx>
#include <editeng/editview.hxx>
#include <editeng/editeng.hxx>

DBG_NAME( EditUndo )

#define MAX_UNDOS	100		// ab dieser Menge darf geloescht werden....
#define MIN_UNDOS	50		// soviel muss stehen bleiben...

#define NO_UNDO			0xFFFF
#define GROUP_NOTFOUND	0xFFFF

TYPEINIT1( EditUndo, SfxUndoAction );
TYPEINIT1( EditUndoDelContent, EditUndo );
TYPEINIT1( EditUndoConnectParas, EditUndo );
TYPEINIT1( EditUndoSplitPara, EditUndo );
TYPEINIT1( EditUndoInsertChars, EditUndo );
TYPEINIT1( EditUndoRemoveChars, EditUndo );
TYPEINIT1( EditUndoInsertFeature, EditUndo );
TYPEINIT1( EditUndoMoveParagraphs, EditUndo );
TYPEINIT1( EditUndoSetStyleSheet, EditUndo );
TYPEINIT1( EditUndoSetParaAttribs, EditUndo );
TYPEINIT1( EditUndoSetAttribs, EditUndo );
TYPEINIT1( EditUndoTransliteration, EditUndo );
TYPEINIT1( EditUndoMarkSelection, EditUndo );

void lcl_DoSetSelection( EditView* pView, sal_uInt16 nPara )
{
	EPaM aEPaM( nPara, 0 );
	EditPaM aPaM( pView->GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	aPaM.SetIndex( aPaM.GetNode()->Len() );
	EditSelection aSel( aPaM, aPaM );
	pView->GetImpEditView()->SetEditSelection( aSel );
}

// -----------------------------------------------------------------------
// EditUndoManager
// ------------------------------------------------------------------------
EditUndoManager::EditUndoManager(sal_uInt16 nMaxUndoActionCount )
:   SfxUndoManager(nMaxUndoActionCount),
    mpImpEE(0)
{
}

void EditUndoManager::SetImpEditEngine(ImpEditEngine* pNew) 
{ 
    mpImpEE = pNew; 
}

sal_Bool __EXPORT EditUndoManager::Undo()
{
	if ( !mpImpEE || GetUndoActionCount() == 0 )
		return sal_False;

	DBG_ASSERT( mpImpEE->GetActiveView(), "Active View?" );

	if ( !mpImpEE->GetActiveView() )
	{
		if ( mpImpEE->GetEditViews().Count() )
			mpImpEE->SetActiveView( mpImpEE->GetEditViews().GetObject(0) );
		else
		{
			DBG_ERROR( "Undo in Engine ohne View nicht moeglich!" );
			return sal_False;
		}
	}

	mpImpEE->GetActiveView()->GetImpEditView()->DrawSelection();	// alte Selektion entfernen

	mpImpEE->SetUndoMode( sal_True );
	sal_Bool bDone = SfxUndoManager::Undo();
	mpImpEE->SetUndoMode( sal_False );

	EditSelection aNewSel( mpImpEE->GetActiveView()->GetImpEditView()->GetEditSelection() );
	DBG_ASSERT( !aNewSel.IsInvalid(), "Ungueltige Selektion nach Undo()" );
	DBG_ASSERT( !aNewSel.DbgIsBuggy( mpImpEE->GetEditDoc() ), "Kaputte Selektion nach Undo()" );

	aNewSel.Min() = aNewSel.Max();
	mpImpEE->GetActiveView()->GetImpEditView()->SetEditSelection( aNewSel );
	mpImpEE->FormatAndUpdate( mpImpEE->GetActiveView() );

	return bDone;
}

sal_Bool __EXPORT EditUndoManager::Redo()
{
	if ( !mpImpEE || GetRedoActionCount() == 0 )
		return sal_False;

	DBG_ASSERT( mpImpEE->GetActiveView(), "Active View?" );

	if ( !mpImpEE->GetActiveView() )
	{
		if ( mpImpEE->GetEditViews().Count() )
			mpImpEE->SetActiveView( mpImpEE->GetEditViews().GetObject(0) );
		else
		{
			DBG_ERROR( "Redo in Engine ohne View nicht moeglich!" );
			return sal_False;
		}
	}

	mpImpEE->GetActiveView()->GetImpEditView()->DrawSelection();	// alte Selektion entfernen

	mpImpEE->SetUndoMode( sal_True );
	sal_Bool bDone = SfxUndoManager::Redo();
	mpImpEE->SetUndoMode( sal_False );

	EditSelection aNewSel( mpImpEE->GetActiveView()->GetImpEditView()->GetEditSelection() );
	DBG_ASSERT( !aNewSel.IsInvalid(), "Ungueltige Selektion nach Undo()" );
	DBG_ASSERT( !aNewSel.DbgIsBuggy( mpImpEE->GetEditDoc() ), "Kaputte Selektion nach Redo()" );

	aNewSel.Min() = aNewSel.Max();
	mpImpEE->GetActiveView()->GetImpEditView()->SetEditSelection( aNewSel );
	mpImpEE->FormatAndUpdate( mpImpEE->GetActiveView() );

	return bDone;
}

// -----------------------------------------------------------------------
// EditUndo
// ------------------------------------------------------------------------
EditUndo::EditUndo( sal_uInt16 nI, ImpEditEngine* p )
{
	DBG_CTOR( EditUndo, 0 );
	nId = nI;
	pImpEE = p;
}

EditUndo::~EditUndo()
{
	DBG_DTOR( EditUndo, 0 );
}

sal_uInt16 __EXPORT EditUndo::GetId() const
{
	DBG_CHKTHIS( EditUndo, 0 );
	return nId;
}

sal_Bool __EXPORT EditUndo::CanRepeat(SfxRepeatTarget&) const
{
	return sal_False;
}

XubString __EXPORT EditUndo::GetComment() const
{
	XubString aComment;
	if ( pImpEE )
	{
		EditEngine* pEditEng = pImpEE->GetEditEnginePtr();
		aComment = pEditEng->GetUndoComment( GetId() );
	}
	return aComment;
}

// -----------------------------------------------------------------------
// EditUndoDelContent
// ------------------------------------------------------------------------
EditUndoDelContent::EditUndoDelContent( ImpEditEngine* _pImpEE, ContentNode* pNode, sal_uInt16 n )
					: EditUndo( EDITUNDO_DELCONTENT, _pImpEE )
{
	pContentNode = pNode;
	nNode = n;
	bDelObject = sal_True;
}

EditUndoDelContent::~EditUndoDelContent()
{
	if ( bDelObject )
		delete pContentNode;
}

void __EXPORT EditUndoDelContent::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	GetImpEditEngine()->InsertContent( pContentNode, nNode );
	bDelObject = sal_False;	// gehoert wieder der Engine
	EditSelection aSel( EditPaM( pContentNode, 0 ), EditPaM( pContentNode, pContentNode->Len() ) );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aSel );
}

void __EXPORT EditUndoDelContent::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );

	ImpEditEngine* _pImpEE = GetImpEditEngine();

	// pNode stimmt nicht mehr, falls zwischendurch Undos, in denen
	// Absaetze verschmolzen sind.
	pContentNode = _pImpEE->GetEditDoc().SaveGetObject( nNode );
	DBG_ASSERT( pContentNode, "EditUndoDelContent::Redo(): Node?!" );

	delete _pImpEE->GetParaPortions()[nNode];
	_pImpEE->GetParaPortions().Remove( nNode );

	// Node nicht loeschen, haengt im Undo!
	_pImpEE->GetEditDoc().Remove( nNode );
	if( _pImpEE->IsCallParaInsertedOrDeleted() )
		_pImpEE->GetEditEnginePtr()->ParagraphDeleted( nNode );

	DeletedNodeInfo* pInf = new DeletedNodeInfo( (sal_uLong)pContentNode, nNode );
	_pImpEE->aDeletedNodes.Insert( pInf, _pImpEE->aDeletedNodes.Count() );
	_pImpEE->UpdateSelections();

	ContentNode* pN = ( nNode < _pImpEE->GetEditDoc().Count() )
		? _pImpEE->GetEditDoc().SaveGetObject( nNode )
		: _pImpEE->GetEditDoc().SaveGetObject( nNode-1 );
	DBG_ASSERT( pN && ( pN != pContentNode ), "?! RemoveContent !? " );
	EditPaM aPaM( pN, pN->Len() );

	bDelObject = sal_True;	// gehoert wieder dem Undo

	_pImpEE->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aPaM, aPaM ) );
}

// -----------------------------------------------------------------------
// EditUndoConnectParas
// ------------------------------------------------------------------------
EditUndoConnectParas::EditUndoConnectParas( ImpEditEngine* _pImpEE, sal_uInt16 nN, sal_uInt16 nSP,
											const SfxItemSet& rLeftParaAttribs, const SfxItemSet& rRightParaAttribs,
											const SfxStyleSheet* pLeftStyle, const SfxStyleSheet* pRightStyle, sal_Bool bBkwrd )
					: 	EditUndo( EDITUNDO_CONNECTPARAS, _pImpEE ),
						aLeftParaAttribs( rLeftParaAttribs ),
						aRightParaAttribs( rRightParaAttribs )
{
	nNode	= nN;
	nSepPos	= nSP;

	if ( pLeftStyle )
	{
		aLeftStyleName = pLeftStyle->GetName();
		eLeftStyleFamily = pLeftStyle->GetFamily();
	}
	if ( pRightStyle )
	{
		aRightStyleName = pRightStyle->GetName();
		eRightStyleFamily = pRightStyle->GetFamily();
	}

	bBackward = bBkwrd;
}

EditUndoConnectParas::~EditUndoConnectParas()
{
}

void __EXPORT EditUndoConnectParas::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );

	// Bei SplitContent darf noch kein ParagraphInserted gerufen werden,
	// weil der Outliner sich auf die Attribute verlaesst um die Tiefe
	// des Absatzes zu initialisieren

	sal_Bool bCall = GetImpEditEngine()->IsCallParaInsertedOrDeleted();
	GetImpEditEngine()->SetCallParaInsertedOrDeleted( sal_False );

	EditPaM aPaM = GetImpEditEngine()->SplitContent( nNode, nSepPos );
	GetImpEditEngine()->SetParaAttribs( nNode, aLeftParaAttribs );
	GetImpEditEngine()->SetParaAttribs( nNode+1, aRightParaAttribs );

	GetImpEditEngine()->SetCallParaInsertedOrDeleted( bCall );
	if ( GetImpEditEngine()->IsCallParaInsertedOrDeleted() )
		GetImpEditEngine()->GetEditEnginePtr()->ParagraphInserted( nNode+1 );

	if ( GetImpEditEngine()->GetStyleSheetPool() ) 
	{
		if ( aLeftStyleName.Len() )
			GetImpEditEngine()->SetStyleSheet( (sal_uInt16)nNode, (SfxStyleSheet*)GetImpEditEngine()->GetStyleSheetPool()->Find( aLeftStyleName, eLeftStyleFamily ) );
		if ( aRightStyleName.Len() )
			GetImpEditEngine()->SetStyleSheet( nNode+1, (SfxStyleSheet*)GetImpEditEngine()->GetStyleSheetPool()->Find( aRightStyleName, eRightStyleFamily ) );
	}

	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aPaM, aPaM ) );
}

void __EXPORT EditUndoConnectParas::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM = GetImpEditEngine()->ConnectContents( nNode, bBackward );

	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aPaM, aPaM ) );
}

// -----------------------------------------------------------------------
// EditUndoSplitPara
// ------------------------------------------------------------------------
EditUndoSplitPara::EditUndoSplitPara( ImpEditEngine* _pImpEE, sal_uInt16 nN, sal_uInt16 nSP )
					: EditUndo( EDITUNDO_SPLITPARA, _pImpEE )
{
	nNode	= nN;
	nSepPos	= nSP;
}

EditUndoSplitPara::~EditUndoSplitPara()
{
}

void __EXPORT EditUndoSplitPara::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM = GetImpEditEngine()->ConnectContents( nNode, sal_False );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aPaM, aPaM ) );
}

void __EXPORT EditUndoSplitPara::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM = GetImpEditEngine()->SplitContent( nNode, nSepPos );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aPaM, aPaM ) );
}

// -----------------------------------------------------------------------
// EditUndoInsertChars
// ------------------------------------------------------------------------
EditUndoInsertChars::EditUndoInsertChars( ImpEditEngine* _pImpEE, const EPaM& rEPaM, const XubString& rStr )
					: EditUndo( EDITUNDO_INSERTCHARS, _pImpEE ),
						aEPaM( rEPaM ), aText( rStr )
{
}

void __EXPORT EditUndoInsertChars::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM( GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	EditSelection aSel( aPaM, aPaM );
	aSel.Max().GetIndex() = aSel.Max().GetIndex() + aText.Len();
	EditPaM aNewPaM( GetImpEditEngine()->ImpDeleteSelection( aSel ) );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aNewPaM, aNewPaM ) );
}

void __EXPORT EditUndoInsertChars::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM( GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	GetImpEditEngine()->ImpInsertText( EditSelection( aPaM, aPaM ), aText );
	EditPaM aNewPaM( aPaM );
	aNewPaM.GetIndex() = aNewPaM.GetIndex() + aText.Len();
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( EditSelection( aPaM, aNewPaM ) );
}

sal_Bool __EXPORT EditUndoInsertChars::Merge( SfxUndoAction* pNextAction )
{
	if ( !pNextAction->ISA( EditUndoInsertChars ) )
		return sal_False;

	EditUndoInsertChars* pNext = (EditUndoInsertChars*)pNextAction;

	if ( aEPaM.nPara != pNext->aEPaM.nPara )
		return sal_False;

	if ( ( aEPaM.nIndex + aText.Len() ) == pNext->aEPaM.nIndex )
	{
		aText += pNext->aText;
		return sal_True;
	}
	return sal_False;
}

// -----------------------------------------------------------------------
// EditUndoRemoveChars
// ------------------------------------------------------------------------
EditUndoRemoveChars::EditUndoRemoveChars( ImpEditEngine* _pImpEE, const EPaM& rEPaM, const XubString& rStr )
					: EditUndo( EDITUNDO_REMOVECHARS, _pImpEE ),
						aEPaM( rEPaM ), aText( rStr )
{
}

void __EXPORT EditUndoRemoveChars::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM( GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	EditSelection aSel( aPaM, aPaM );
	GetImpEditEngine()->ImpInsertText( aSel, aText );
	aSel.Max().GetIndex() = aSel.Max().GetIndex() + aText.Len();
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aSel );
}

void __EXPORT EditUndoRemoveChars::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM( GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	EditSelection aSel( aPaM, aPaM );
	aSel.Max().GetIndex() = aSel.Max().GetIndex() + aText.Len();
	EditPaM aNewPaM = GetImpEditEngine()->ImpDeleteSelection( aSel );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aNewPaM );
}

// -----------------------------------------------------------------------
// EditUndoInsertFeature
// ------------------------------------------------------------------------
EditUndoInsertFeature::EditUndoInsertFeature( ImpEditEngine* _pImpEE, const EPaM& rEPaM, const SfxPoolItem& rFeature)
					: EditUndo( EDITUNDO_INSERTFEATURE, _pImpEE ), aEPaM( rEPaM )
{
	pFeature = rFeature.Clone();
	DBG_ASSERT( pFeature, "Feature konnte nicht dupliziert werden: EditUndoInsertFeature" );
}

EditUndoInsertFeature::~EditUndoInsertFeature()
{
	delete pFeature;
}

void __EXPORT EditUndoInsertFeature::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM( GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	EditSelection aSel( aPaM, aPaM );
	// Attribute werden dort implizit vom Dokument korrigiert...
	aSel.Max().GetIndex()++;
	EditPaM aNewPaM = GetImpEditEngine()->ImpDeleteSelection( aSel );
	aSel.Max().GetIndex()--;	// Fuer Selektion
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aSel );
}

void __EXPORT EditUndoInsertFeature::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditPaM aPaM( GetImpEditEngine()->CreateEditPaM( aEPaM ) );
	EditSelection aSel( aPaM, aPaM );
	GetImpEditEngine()->ImpInsertFeature( aSel, *pFeature );
	if ( pFeature->Which() == EE_FEATURE_FIELD )
		GetImpEditEngine()->UpdateFields();
	aSel.Max().GetIndex()++;
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aSel );
}

// -----------------------------------------------------------------------
// EditUndoMoveParagraphs
// ------------------------------------------------------------------------
EditUndoMoveParagraphs::EditUndoMoveParagraphs
							( ImpEditEngine* _pImpEE, const Range& rParas, sal_uInt16 n )
							: 	EditUndo( EDITUNDO_MOVEPARAGRAPHS, _pImpEE ),
								nParagraphs( rParas )
{
	nDest = n;
}

EditUndoMoveParagraphs::~EditUndoMoveParagraphs()
{
}

void __EXPORT EditUndoMoveParagraphs::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	Range aTmpRange( nParagraphs );
	long nTmpDest = aTmpRange.Min();

	long nDiff = ( nDest - aTmpRange.Min() );
	aTmpRange.Min() += nDiff;
	aTmpRange.Max() += nDiff;

	if ( nParagraphs.Min() < (long)nDest )
	{
		long nLen = aTmpRange.Len();
		aTmpRange.Min() -= nLen;
		aTmpRange.Max() -= nLen;
	}
	else
		nTmpDest += aTmpRange.Len();

	EditSelection aNewSel( GetImpEditEngine()->MoveParagraphs( aTmpRange, (sal_uInt16)nTmpDest, 0 ) );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aNewSel );
}

void __EXPORT EditUndoMoveParagraphs::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	EditSelection aNewSel( GetImpEditEngine()->MoveParagraphs( nParagraphs, nDest, 0 ) );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aNewSel );
}

// -----------------------------------------------------------------------
// EditUndoSetStyleSheet
// ------------------------------------------------------------------------
EditUndoSetStyleSheet::EditUndoSetStyleSheet( ImpEditEngine* _pImpEE, sal_uInt16 nP,
						const XubString& rPrevName, SfxStyleFamily ePrevFam,
						const XubString& rNewName, SfxStyleFamily eNewFam,
						const SfxItemSet& rPrevParaAttribs )
	: EditUndo( EDITUNDO_STYLESHEET, _pImpEE ), aPrevName( rPrevName ), aNewName( rNewName ),
	  aPrevParaAttribs( rPrevParaAttribs )
{
	ePrevFamily = ePrevFam;
	eNewFamily = eNewFam;
	nPara = nP;
}

EditUndoSetStyleSheet::~EditUndoSetStyleSheet()
{
}

void __EXPORT EditUndoSetStyleSheet::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	GetImpEditEngine()->SetStyleSheet( nPara, (SfxStyleSheet*)GetImpEditEngine()->GetStyleSheetPool()->Find( aPrevName, ePrevFamily ) );
	GetImpEditEngine()->SetParaAttribs( nPara, aPrevParaAttribs );
	lcl_DoSetSelection( GetImpEditEngine()->GetActiveView(), nPara );
}

void __EXPORT EditUndoSetStyleSheet::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	GetImpEditEngine()->SetStyleSheet( nPara, (SfxStyleSheet*)GetImpEditEngine()->GetStyleSheetPool()->Find( aNewName, eNewFamily ) );
	lcl_DoSetSelection( GetImpEditEngine()->GetActiveView(), nPara );
}

// -----------------------------------------------------------------------
// EditUndoSetParaAttribs
// ------------------------------------------------------------------------
EditUndoSetParaAttribs::EditUndoSetParaAttribs( ImpEditEngine* _pImpEE, sal_uInt16 nP, const SfxItemSet& rPrevItems, const SfxItemSet& rNewItems )
	: EditUndo( EDITUNDO_PARAATTRIBS, _pImpEE ), 
	  aPrevItems( rPrevItems ),
	  aNewItems(rNewItems )
{
	nPara = nP;
}

EditUndoSetParaAttribs::~EditUndoSetParaAttribs()
{
}

void __EXPORT EditUndoSetParaAttribs::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	GetImpEditEngine()->SetParaAttribs( nPara, aPrevItems );
	lcl_DoSetSelection( GetImpEditEngine()->GetActiveView(), nPara );
}

void __EXPORT EditUndoSetParaAttribs::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	GetImpEditEngine()->SetParaAttribs( nPara, aNewItems );
	lcl_DoSetSelection( GetImpEditEngine()->GetActiveView(), nPara );
}

// -----------------------------------------------------------------------
// EditUndoSetAttribs
// ------------------------------------------------------------------------
EditUndoSetAttribs::EditUndoSetAttribs( ImpEditEngine* _pImpEE, const ESelection& rESel, const SfxItemSet& rNewItems )
	: EditUndo( EDITUNDO_ATTRIBS, _pImpEE ), 
	  aESel( rESel ),
	  aNewAttribs( rNewItems )
{
	// Wenn das EditUndoSetAttribs eigentlich ein RemoveAttribs ist, koennte
	// man das eigentlich an einem leeren ItemSet erkennen, aber dann muesste
	// an einigen Stellen abgefangen werden, das ggf. ein SetAttribs mit einem
	// leeren ItemSet gemacht wird.
	// => Ich habe lieber diesen Member spendiert...
	bSetIsRemove = sal_False;
	bRemoveParaAttribs = sal_False;
	nRemoveWhich = 0;
	nSpecial = 0;
}

EditUndoSetAttribs::~EditUndoSetAttribs()
{
	// Items aus Pool holen...
	SfxItemPool* pPool = aNewAttribs.GetPool();
	sal_uInt16 nContents = aPrevAttribs.Count();
	for ( sal_uInt16 n = 0; n < nContents; n++ )
	{
		ContentAttribsInfo* pInf = aPrevAttribs[n];
		DBG_ASSERT( pInf, "Undo_DTOR (SetAttribs): pInf = NULL!" );
		for ( sal_uInt16 nAttr = 0; nAttr < pInf->GetPrevCharAttribs().Count(); nAttr++ )
		{
			EditCharAttrib* pX = pInf->GetPrevCharAttribs()[nAttr];
			DBG_ASSERT( pX, "Undo_DTOR (SetAttribs): pX = NULL!" );
			pPool->Remove( *pX->GetItem() );
			delete pX;
		}
		delete pInf;
	}
}

void __EXPORT EditUndoSetAttribs::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	ImpEditEngine* _pImpEE = GetImpEditEngine();
	sal_Bool bFields = sal_False;
	for ( sal_uInt16 nPara = aESel.nStartPara; nPara <= aESel.nEndPara; nPara++ )
	{
		ContentAttribsInfo* pInf = aPrevAttribs[ (sal_uInt16)(nPara-aESel.nStartPara) ];
		DBG_ASSERT( pInf, "Undo (SetAttribs): pInf = NULL!" );

		// erstmal die Absatzattribute...
		_pImpEE->SetParaAttribs( nPara, pInf->GetPrevParaAttribs() );

		// Dann die Zeichenattribute...
		// Alle Attribute inkl. Features entfernen, werden wieder neu eingestellt.
		_pImpEE->RemoveCharAttribs( nPara, 0, sal_True );
		DBG_ASSERT( _pImpEE->GetEditDoc().SaveGetObject( nPara ), "Undo (SetAttribs): pNode = NULL!" );
		ContentNode* pNode = _pImpEE->GetEditDoc().GetObject( nPara );
		for ( sal_uInt16 nAttr = 0; nAttr < pInf->GetPrevCharAttribs().Count(); nAttr++ )
		{
			EditCharAttrib* pX = pInf->GetPrevCharAttribs()[nAttr];
			DBG_ASSERT( pX, "Redo (SetAttribs): pX = NULL!" );
			// wird autom. 'eingepoolt'.
			_pImpEE->GetEditDoc().InsertAttrib( pNode, pX->GetStart(), pX->GetEnd(), *pX->GetItem() );
			if ( pX->Which() == EE_FEATURE_FIELD )
				bFields = sal_True;
		}
	}
	if ( bFields )
		_pImpEE->UpdateFields();
	ImpSetSelection( GetImpEditEngine()->GetActiveView() );
}

void __EXPORT EditUndoSetAttribs::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	ImpEditEngine* _pImpEE = GetImpEditEngine();

	EditSelection aSel( _pImpEE->CreateSel( aESel ) );
	if ( !bSetIsRemove )
		_pImpEE->SetAttribs( aSel, aNewAttribs, nSpecial );
	else
		_pImpEE->RemoveCharAttribs( aSel, bRemoveParaAttribs, nRemoveWhich );

	ImpSetSelection( GetImpEditEngine()->GetActiveView() );
}

void EditUndoSetAttribs::ImpSetSelection( EditView* /*pView*/ )
{
	ImpEditEngine* _pImpEE = GetImpEditEngine();
	EditSelection aSel( _pImpEE->CreateSel( aESel ) );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aSel );
}

// -----------------------------------------------------------------------
// EditUndoTransliteration
// ------------------------------------------------------------------------
EditUndoTransliteration::EditUndoTransliteration( ImpEditEngine* _pImpEE, const ESelection& rESel, sal_Int32 nM )
	: EditUndo( EDITUNDO_TRANSLITERATE, _pImpEE ), aOldESel( rESel )
{
	nMode = nM;
	pTxtObj = NULL;
}

EditUndoTransliteration::~EditUndoTransliteration()
{
	delete pTxtObj;
}

void __EXPORT EditUndoTransliteration::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );

	ImpEditEngine* _pImpEE = GetImpEditEngine();

	EditSelection aSel( _pImpEE->CreateSel( aNewESel ) );

	// Insert text, but don't expand Atribs at the current position:
	aSel = _pImpEE->DeleteSelected( aSel );
	EditSelection aDelSel( aSel );
	aSel = _pImpEE->InsertParaBreak( aSel );
	aDelSel.Max() = aSel.Min();
	aDelSel.Max().GetNode()->GetCharAttribs().DeleteEmptyAttribs( _pImpEE->GetEditDoc().GetItemPool() );
    EditSelection aNewSel;
	if ( pTxtObj )
	{
		aNewSel = _pImpEE->InsertText( *pTxtObj, aSel );
	}
	else
	{
		aNewSel = _pImpEE->InsertText( aSel, aText );
	}
    if ( aNewSel.Min().GetNode() == aDelSel.Max().GetNode() )
    {
        aNewSel.Min().SetNode( aDelSel.Min().GetNode() );
        aNewSel.Min().GetIndex() =
            aNewSel.Min().GetIndex() + aDelSel.Min().GetIndex();
    }
    if ( aNewSel.Max().GetNode() == aDelSel.Max().GetNode() )
    {
        aNewSel.Max().SetNode( aDelSel.Min().GetNode() );
        aNewSel.Max().GetIndex() =
            aNewSel.Max().GetIndex() + aDelSel.Min().GetIndex();
    }
	_pImpEE->DeleteSelected( aDelSel );

	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aNewSel );
}

void __EXPORT EditUndoTransliteration::Redo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	ImpEditEngine* _pImpEE = GetImpEditEngine();

	EditSelection aSel( _pImpEE->CreateSel( aOldESel ) );
	EditSelection aNewSel = _pImpEE->TransliterateText( aSel, nMode );
	GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( aNewSel );
}

// -----------------------------------------------------------------------
// EditUndoMarkSelection
// ------------------------------------------------------------------------
EditUndoMarkSelection::EditUndoMarkSelection( ImpEditEngine* _pImpEE, const ESelection& rSel )
	: EditUndo( EDITUNDO_MARKSELECTION, _pImpEE ), aSelection( rSel )
{
}

EditUndoMarkSelection::~EditUndoMarkSelection()
{
}

void __EXPORT EditUndoMarkSelection::Undo()
{
	DBG_ASSERT( GetImpEditEngine()->GetActiveView(), "Undo/Redo: Keine Active View!" );
	if ( GetImpEditEngine()->GetActiveView() ) 
    {
        if ( GetImpEditEngine()->IsFormatted() )
		    GetImpEditEngine()->GetActiveView()->SetSelection( aSelection );
        else
	        GetImpEditEngine()->GetActiveView()->GetImpEditView()->SetEditSelection( GetImpEditEngine()->CreateSel( aSelection ) );
    }
}

void __EXPORT EditUndoMarkSelection::Redo()
{
	// Fuer Redo unwichtig, weil am Anfang der Undo-Klammerung
}