| Important: The hander component extensionoptions.jar in the extensions may not |
| contain exactly the same sources as the one build in the handler directory. To |
| make sure that debugging works build the handler directory and put the |
| extensionoptions.jar into the extension. |
| |
| |
| |
| leaf1.oxt: Defines a leaf under the node WriterNode |
| ================================================================================ |
| |
| leaf1mod.oxt: Defines a leaf under the node WriterNode |
| |
| It has a douplicate entry in the manifest.xml (OptionsDialog.xcu). This would cause a DisposedException when uninstalling on OOo 3.0 and prevent the extension from being uninstalled. This is actually a bug of the extensions. However, the error is difficult to investigate. Therefore this was fixed to make OOo more robust (i96690). |
| ================================================================================ |
| |
| leaf2.oxt: Defines a leaf under a node that has a name which requires special |
| "xml encoding". The name is "My Writer's & Settings". The node is not assigned |
| to a Module and the Node/AllModules property is not true. This is a typical |
| scenario when a Node had been added to an existing Module and later the Module |
| was removed. This is a situation which actually should not occur. In this case |
| DO NOT show the Node in the OOo's options dialog, because it shows only nodes |
| for a particular module and in this case the Module for the Node is unknown. |
| In the Extension Manager's |
| options dialog this Node can be shown because the Module is irrelevant. |
| See also nodes5.oxt. |
| ================================================================================ |
| |
| leaves1.oxt: multiple ordered leaves under available nodes. The leaves Lables are |
| localized for en-US and de. The following leaves should appear: |
| |
| Writer: |
| -leaves1 Writer 1 en-US |
| -leaves1 Writer 2 en-US |
| -leaves1 Writer 3 en-US |
| |
| Calc: |
| -leaves1 Calc 3 en-US |
| -leaves1 Calc 3 en-US |
| -leaves1 Calc 3 en-US |
| |
| Draw: |
| -leaves1 Draw 3 en-US |
| -leaves1 Draw 3 en-US |
| -leaves1 Draw 3 en-US |
| |
| If a german office is used then the strings contain "de" instead of "en-US". |
| ================================================================================ |
| |
| leaves2.oxt: Same as leaves1.oxt. Use together with leaves1.oxt to test the |
| grouping of leaves. |
| ================================================================================ |
| |
| leaves3.oxt: Same as leaves1.oxt, but the leaves are not ordered. |
| ================================================================================ |
| |
| nodes1.oxt: Defines one node which has AllModules set and which has |
| no children. Therefore this node should not be displayed. |
| ================================================================================ |
| |
| nodes2.oxt: Defines 3 nodes which use AllModules and which form an |
| ordered group. Every node defines also 3 nodes which have a determined order. |
| |
| -nodes2 node 1 en-US |
| -nodes2 node 1 leaf 1 en-US |
| -nodes2 node 1 leaf 2 en-US |
| -nodes2 node 1 leaf 3 en-US |
| |
| -nodes2 node 2 en-US |
| -nodes2 node 2 leaf 1 en-US |
| -nodes2 node 2 leaf 2 en-US |
| -nodes2 node 2 leaf 3 en-US |
| |
| -nodes2 node 3 en-US |
| -nodes2 node 3 leaf 1 en-US |
| -nodes2 node 3 leaf 2 en-US |
| -nodes2 node 3 leaf 3 en-US |
| |
| ================================================================================ |
| |
| nodes3.oxt: Defines 3 nodes which are placed under different existing Modules. |
| The nodes and there leaves are ordered. |
| |
| Context Writer: |
| - nodes3 node 1 |
| nodes3 node 1 leaf 1 en-US |
| nodes3 node 1 leaf 2 en-US |
| nodes3 node 1 leaf 3 en-US |
| |
| - nodes3 node 2 |
| nodes3 node 2 leaf 1 en-US |
| nodes3 node 2 leaf 2 en-US |
| nodes3 node 2 leaf 3 en-US |
| |
| - nodes3 node 3 |
| nodes3 node 3 leaf 1 en-US |
| nodes3 node 3 leaf 2 en-US |
| nodes3 node 3 leaf 3 en-US |
| |
| Context Calc: |
| - nodes3 node 1 |
| nodes3 node 1 leaf 1 en-US |
| nodes3 node 1 leaf 2 en-US |
| nodes3 node 1 leaf 3 en-US |
| |
| - nodes3 node 3 |
| nodes3 node 3 leaf 1 en-US |
| nodes3 node 3 leaf 2 en-US |
| nodes3 node 3 leaf 3 en-US |
| |
| Context Draw: |
| - nodes3 node 2 |
| nodes3 node 2 leaf 1 en-US |
| nodes3 node 2 leaf 2 en-US |
| nodes3 node 2 leaf 3 en-US |
| |
| ================================================================================ |
| |
| nodes4.oxt: Same as nodes3.oxt. Use together with nodes3.txt to test the |
| grouping of nodes. |
| ================================================================================ |
| |
| nodes5.oxt: Defines a node which in turn defines 3 leaves. The Node |
| is not assigned to a Module and the AllModule property is false (which is the |
| default).This may happen when a node |
| had been added to an already existing Module and then this Module was removed. For |
| example, an extension adds a node to the "Writer Module" and the |
| next office update removes the "Writer Module" (which is rather inconceivable). |
| Then the node and its leaves MUST NOT be displayed in OOo's options dialog, |
| because the Module is not known. However, it can be displayed in the |
| options dialog of the Extension Manager. See also the description for leaf2.oxt. |
| ================================================================================ |
| |
| modules1.oxt: Defines two Modules and three Nodes. The Nodes may not |
| be displayed in OOo's options dialog because there is currently no application |
| which uses this Module. However the Nodes are displayed in the options dialog |
| of the Extension Manager. |
| There are three Nodes defined. The relation ship is this: |
| |
| -module1 |
| -node 1 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node 2 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node 3 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| |
| -module2 |
| -node1 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node3 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| |
| The options dialog of the Extension Manager shall display only three nodes: |
| |
| -node 1 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node 2 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node 3 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| |
| or |
| |
| -node 1 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node 3 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| -node 2 |
| -leaf 1 |
| -leaf 2 |
| -leaf 3 |
| |
| Since the order of Module|s is not defined, the dialog may display first the |
| Nodes from module2 and then from module1. If a node is already displayed then |
| it is not shown again. |
| |
| ================================================================================ |
| |
| modules2.oxt: Same as modules1, except that the order of nodes and leaves |
| is not defined. |
