AOO410/main/cui/source/tabpages/transfrm.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_cui.hxx"

// include ---------------------------------------------------------------

#include <tools/shl.hxx>
#include <sfx2/app.hxx>
#include <svx/svdview.hxx>
#include <svx/svdobj.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svdotext.hxx>
#include <svx/sderitm.hxx>
#include <svx/dialogs.hrc>
#include <cuires.hrc>
#include "transfrm.hrc"
#include <editeng/sizeitem.hxx>

#include "transfrm.hxx"
#include <dialmgr.hxx>
#include "svx/dlgutil.hxx"
#include <editeng/svxenum.hxx>
#include "svx/anchorid.hxx"
#include <sfx2/module.hxx>
#include <svl/rectitem.hxx>
#include <svl/aeitem.hxx>
#include <swpossizetabpage.hxx>

// Toleranz fuer WorkingArea
#define DIFF 1000

// static ----------------------------------------------------------------

static sal_uInt16 pPosSizeRanges[] =
{
	SID_ATTR_TRANSFORM_POS_X,
	SID_ATTR_TRANSFORM_POS_Y,
	SID_ATTR_TRANSFORM_PROTECT_POS,
	SID_ATTR_TRANSFORM_PROTECT_POS,
	SID_ATTR_TRANSFORM_INTERN,
	SID_ATTR_TRANSFORM_INTERN,
	SID_ATTR_TRANSFORM_ANCHOR,
	SID_ATTR_TRANSFORM_VERT_ORIENT,
	SID_ATTR_TRANSFORM_WIDTH,
	SID_ATTR_TRANSFORM_SIZE_POINT,
	SID_ATTR_TRANSFORM_PROTECT_POS,
	SID_ATTR_TRANSFORM_INTERN,
	SID_ATTR_TRANSFORM_AUTOWIDTH,
	SID_ATTR_TRANSFORM_AUTOHEIGHT,
	0
};

static sal_uInt16 pAngleRanges[] =
{
	SID_ATTR_TRANSFORM_ROT_X,
	SID_ATTR_TRANSFORM_ANGLE,
	SID_ATTR_TRANSFORM_INTERN,
	SID_ATTR_TRANSFORM_INTERN,
	0
};

static sal_uInt16 pSlantRanges[] =
{
	SDRATTR_ECKENRADIUS,
	SDRATTR_ECKENRADIUS,
	SID_ATTR_TRANSFORM_SHEAR,
	SID_ATTR_TRANSFORM_SHEAR_VERTICAL,
	SID_ATTR_TRANSFORM_INTERN,
	SID_ATTR_TRANSFORM_INTERN,
	0
};

void lcl_ConvertRect(basegfx::B2DRange& rRange, const sal_uInt16 nDigits, const MapUnit ePoolUnit, const FieldUnit eDlgUnit)
{
	const basegfx::B2DPoint aTopLeft(
		(double)MetricField::ConvertValue(basegfx::fround(rRange.getMinX()), nDigits, ePoolUnit, eDlgUnit),
		(double)MetricField::ConvertValue(basegfx::fround(rRange.getMinY()), nDigits, ePoolUnit, eDlgUnit));
	const basegfx::B2DPoint aBottomRight(
		(double)MetricField::ConvertValue(basegfx::fround(rRange.getMaxX()), nDigits, ePoolUnit, eDlgUnit),
		(double)MetricField::ConvertValue(basegfx::fround(rRange.getMaxY()), nDigits, ePoolUnit, eDlgUnit));

	rRange = basegfx::B2DRange(aTopLeft, aBottomRight);
}

void lcl_ScaleRect(basegfx::B2DRange& rRange, const Fraction aUIScale)
{
	const double fFactor(1.0 / double(aUIScale));
	rRange = basegfx::B2DRange(rRange.getMinimum() * fFactor, rRange.getMaximum() * fFactor);
}

/*************************************************************************
|*
|* Konstruktor des Tab-Dialogs: Fuegt die Seiten zum Dialog hinzu
|*
\************************************************************************/

SvxTransformTabDialog::SvxTransformTabDialog( Window* pParent, const SfxItemSet* pAttr,
								const SdrView* pSdrView, sal_uInt16 nAnchorTypes ) :
	SfxTabDialog( pParent, CUI_RES( RID_SVXDLG_TRANSFORM ), pAttr ),
	pView       ( pSdrView ),
	nAnchorCtrls(nAnchorTypes)
{
	DBG_ASSERT(pView, "no valid view (!)");
	FreeResource();

    //different positioning page in Writer
    if(nAnchorCtrls & 0x00ff)
    {        
        AddTabPage(RID_SVXPAGE_SWPOSSIZE, SvxSwPosSizeTabPage::Create, SvxSwPosSizeTabPage::GetRanges);
        RemoveTabPage(RID_SVXPAGE_POSITION_SIZE);
    }
    else
    {        
        AddTabPage(RID_SVXPAGE_POSITION_SIZE, SvxPositionSizeTabPage::Create, SvxPositionSizeTabPage::GetRanges);
        RemoveTabPage(RID_SVXPAGE_SWPOSSIZE);
    }

	AddTabPage(RID_SVXPAGE_ANGLE, SvxAngleTabPage::Create, SvxAngleTabPage::GetRanges);
	AddTabPage(RID_SVXPAGE_SLANT, SvxSlantTabPage::Create, SvxSlantTabPage::GetRanges);
}

// -----------------------------------------------------------------------

SvxTransformTabDialog::~SvxTransformTabDialog()
{
}

// -----------------------------------------------------------------------

void SvxTransformTabDialog::PageCreated(sal_uInt16 nId, SfxTabPage &rPage)
{
	switch(nId)
	{
		case RID_SVXPAGE_POSITION_SIZE:
		{
            SvxPositionSizeTabPage& rSvxPos =  static_cast<SvxPositionSizeTabPage&>(rPage);
			rSvxPos.SetView(pView);
			rSvxPos.Construct();
			
			if(nAnchorCtrls & SVX_OBJ_NORESIZE)
			{
				rSvxPos.DisableResize();
			}

			if(nAnchorCtrls & SVX_OBJ_NOPROTECT)
			{
				rSvxPos.DisableProtect();
				rSvxPos.UpdateControlStates();
			}
		
			break;
		}
        case RID_SVXPAGE_SWPOSSIZE :
        {
            SvxSwPosSizeTabPage& rSwPos =  static_cast<SvxSwPosSizeTabPage&>(rPage);

			rSwPos.EnableAnchorTypes(nAnchorCtrls);
            rSwPos.SetValidateFramePosLink(aValidateLink);
            rSwPos.SetView(pView);

			break;
        }

		case RID_SVXPAGE_ANGLE:
		{
            SvxAngleTabPage& rSvxAng =  static_cast<SvxAngleTabPage&>(rPage);

			rSvxAng.SetView( pView );
			rSvxAng.Construct();
		
			break;
		}

		case RID_SVXPAGE_SLANT:
		{
            SvxSlantTabPage& rSvxSlnt =  static_cast<SvxSlantTabPage&>(rPage);

			rSvxSlnt.SetView( pView );
			rSvxSlnt.Construct();

			break;
		}
	}
}

// -----------------------------------------------------------------------

void SvxTransformTabDialog::SetValidateFramePosLink(const Link& rLink)
{
    aValidateLink = rLink;
}

/*************************************************************************
|*
|*      Dialog zum Aendern der Position des Drehwinkels und des Drehwinkels
|*      der Grafikobjekte
|*
\************************************************************************/

SvxAngleTabPage::SvxAngleTabPage( Window* pParent, const SfxItemSet& rInAttrs  ) :
	SvxTabPage              ( pParent, CUI_RES( RID_SVXPAGE_ANGLE ), rInAttrs ),
	aFlPosition				( this, CUI_RES( FL_POSITION ) ),
	aFtPosX                 ( this, CUI_RES( FT_POS_X ) ),
	aMtrPosX                ( this, CUI_RES( MTR_FLD_POS_X ) ),
	aFtPosY                 ( this, CUI_RES( FT_POS_Y ) ),
	aMtrPosY                ( this, CUI_RES( MTR_FLD_POS_Y ) ),
	aFtPosPresets			( this, CUI_RES(FT_POSPRESETS) ),	
	aCtlRect                ( this, CUI_RES( CTL_RECT ) ),
	
	aFlAngle                ( this, CUI_RES( FL_ANGLE ) ),
	aFtAngle                ( this, CUI_RES( FT_ANGLE ) ),
	aMtrAngle               ( this, CUI_RES( MTR_FLD_ANGLE ) ),
	aFtAnglePresets			( this, CUI_RES(FT_ANGLEPRESETS) ),	
	aCtlAngle               ( this, CUI_RES( CTL_ANGLE ),
								RP_RB, 200, 80, CS_ANGLE ),
	rOutAttrs               ( rInAttrs )
{
	FreeResource();

	// calculate PoolUnit
	SfxItemPool* pPool = rOutAttrs.GetPool();
	DBG_ASSERT( pPool, "no pool (!)" );
	ePoolUnit = pPool->GetMetric(SID_ATTR_TRANSFORM_POS_X);

	aMtrAngle.SetModifyHdl(LINK( this, SvxAngleTabPage, ModifiedHdl));

	aCtlRect.SetAccessibleRelationLabeledBy(&aFtPosPresets);
	aCtlRect.SetAccessibleRelationMemberOf(&aFlPosition);
	aCtlAngle.SetAccessibleRelationLabeledBy(&aFtAnglePresets);
	aCtlAngle.SetAccessibleRelationMemberOf(&aFlAngle);	
}

// -----------------------------------------------------------------------

void SvxAngleTabPage::Construct()
{
	DBG_ASSERT(pView, "No valid view (!)");
	eDlgUnit = GetModuleFieldUnit(GetItemSet());
	SetFieldUnit(aMtrPosX, eDlgUnit, sal_True);
	SetFieldUnit(aMtrPosY, eDlgUnit, sal_True);

	if(FUNIT_MILE == eDlgUnit || FUNIT_KM == eDlgUnit)
	{
		aMtrPosX.SetDecimalDigits( 3 );
		aMtrPosY.SetDecimalDigits( 3 );
	}

	{ // #i75273#
		Rectangle aTempRect(pView->GetAllMarkedRect());
		pView->GetSdrPageView()->LogicToPagePos(aTempRect);
		maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
	}

	// Take anchor into account (Writer)
	const SdrMarkList& rMarkList = pView->GetMarkedObjectList();

	if(rMarkList.GetMarkCount())
	{
		const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
		maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y());

		if(!maAnchor.equalZero()) // -> Writer
		{
			maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor);
		}
	}

	// take scale into account
	const Fraction aUIScale(pView->GetModel()->GetUIScale());
	lcl_ScaleRect(maRange, aUIScale);

	// take UI units into account
	sal_uInt16 nDigits(aMtrPosX.GetDecimalDigits());
	lcl_ConvertRect(maRange, nDigits, (MapUnit)ePoolUnit, eDlgUnit);

	if(!pView->IsRotateAllowed())
	{
		aFlPosition.Disable();
		aFtPosX.Disable();
		aMtrPosX.Disable();
		aFtPosY.Disable();
		aMtrPosY.Disable();
		aFtPosPresets.Disable();
		aCtlRect.Disable();
		aFlAngle.Disable();
		aFtAngle.Disable();
		aMtrAngle.Disable();
		aFtAnglePresets.Disable();
		aCtlAngle.Disable();
	}
}

// -----------------------------------------------------------------------

sal_Bool SvxAngleTabPage::FillItemSet(SfxItemSet& rSet)
{
	sal_Bool bModified = sal_False;

	if(aMtrAngle.IsValueModified() || aMtrPosX.IsValueModified() || aMtrPosY.IsValueModified())
	{
		const double fUIScale(double(pView->GetModel()->GetUIScale()));
		const double fTmpX((GetCoreValue(aMtrPosX, ePoolUnit) + maAnchor.getX()) * fUIScale);
		const double fTmpY((GetCoreValue(aMtrPosY, ePoolUnit) + maAnchor.getY()) * fUIScale);

		rSet.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ANGLE), static_cast<sal_Int32>(aMtrAngle.GetValue())));
		rSet.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_X), basegfx::fround(fTmpX)));
        rSet.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_Y), basegfx::fround(fTmpY)));

		bModified |= sal_True;
	}

	return bModified;
}

// -----------------------------------------------------------------------

void SvxAngleTabPage::Reset(const SfxItemSet& rAttrs)
{
	const double fUIScale(double(pView->GetModel()->GetUIScale()));

	const SfxPoolItem* pItem = GetItem( rAttrs, SID_ATTR_TRANSFORM_ROT_X );
	if(pItem)
	{
		const double fTmp(((double)((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getX()) / fUIScale);
		SetMetricValue(aMtrPosX, basegfx::fround(fTmp), ePoolUnit);
	}
	else
	{
		aMtrPosX.SetText( String() );
	}

	pItem = GetItem(rAttrs, SID_ATTR_TRANSFORM_ROT_Y);
	if(pItem)
	{
		const double fTmp(((double)((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getY()) / fUIScale);
		SetMetricValue(aMtrPosY, basegfx::fround(fTmp), ePoolUnit);
	}
	else
	{
		aMtrPosX.SetText( String() );
	}

	pItem = GetItem( rAttrs, SID_ATTR_TRANSFORM_ANGLE );
	if(pItem)
	{
		aMtrAngle.SetValue(((const SfxInt32Item*)pItem)->GetValue());
	}
	else
	{
		aMtrAngle.SetText( String() );
	}

	aMtrAngle.SaveValue();
	ModifiedHdl(this);
}

// -----------------------------------------------------------------------

SfxTabPage* SvxAngleTabPage::Create( Window* pWindow, const SfxItemSet& rSet)
{
    return(new SvxAngleTabPage(pWindow, rSet));
}

//------------------------------------------------------------------------

sal_uInt16* SvxAngleTabPage::GetRanges()
{
	return(pAngleRanges);
}

// -----------------------------------------------------------------------

void SvxAngleTabPage::ActivatePage(const SfxItemSet& /*rSet*/)
{
}

// -----------------------------------------------------------------------

int SvxAngleTabPage::DeactivatePage( SfxItemSet* _pSet )
{
    if(_pSet)
	{
        FillItemSet(*_pSet);
	}

	return LEAVE_PAGE;
}

//------------------------------------------------------------------------

void SvxAngleTabPage::PointChanged(Window* pWindow, RECT_POINT eRP)
{
	if(pWindow == &aCtlRect)
	{
		switch(eRP)
		{
			case RP_LT:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
				break;
			}
			case RP_MT:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
				break;
			}
			case RP_RT:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
				break;
			}
			case RP_LM:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
				break;
			}
			case RP_MM:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
				break;
			}
			case RP_RM:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
				break;
			}
			case RP_LB:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
				break;
			}
			case RP_MB:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
				break;
			}
			case RP_RB:
			{
				aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
				aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
				break;
			}
		}
	}
	else if(pWindow == &aCtlAngle)
	{
		switch( eRP )
		{
			case RP_LT: aMtrAngle.SetUserValue( 13500, FUNIT_NONE ); break;
			case RP_MT: aMtrAngle.SetUserValue(  9000, FUNIT_NONE ); break;
			case RP_RT: aMtrAngle.SetUserValue(  4500, FUNIT_NONE ); break;
			case RP_LM: aMtrAngle.SetUserValue( 18000, FUNIT_NONE ); break;
			case RP_RM: aMtrAngle.SetUserValue(     0, FUNIT_NONE ); break;
			case RP_LB: aMtrAngle.SetUserValue( 22500, FUNIT_NONE ); break;
			case RP_MB: aMtrAngle.SetUserValue( 27000, FUNIT_NONE ); break;
			case RP_RB: aMtrAngle.SetUserValue( 31500, FUNIT_NONE ); break;
            case RP_MM: break;
        }
	}
}

//------------------------------------------------------------------------

IMPL_LINK( SvxAngleTabPage, ModifiedHdl, void *, EMPTYARG )
{
	switch(aMtrAngle.GetValue())
	{
		case 13500: aCtlAngle.SetActualRP( RP_LT ); break;
		case  9000: aCtlAngle.SetActualRP( RP_MT ); break;
		case  4500: aCtlAngle.SetActualRP( RP_RT ); break;
		case 18000: aCtlAngle.SetActualRP( RP_LM ); break;
		case     0: aCtlAngle.SetActualRP( RP_RM ); break;
		case 22500: aCtlAngle.SetActualRP( RP_LB ); break;
		case 27000: aCtlAngle.SetActualRP( RP_MB ); break;
		case 31500: aCtlAngle.SetActualRP( RP_RB ); break;
		default:    aCtlAngle.SetActualRP( RP_MM ); break;
	}

	return( 0L );
}

/*************************************************************************
|*
|*      Dialog zum Aendern des Eckenradius und zum Schraegstellen
|*
\************************************************************************/

SvxSlantTabPage::SvxSlantTabPage( Window* pParent, const SfxItemSet& rInAttrs  ) :
	SvxTabPage              ( pParent, CUI_RES( RID_SVXPAGE_SLANT ), rInAttrs ),

	aFlRadius               ( this, CUI_RES( FL_RADIUS ) ),
	aFtRadius               ( this, CUI_RES( FT_RADIUS ) ),
	aMtrRadius              ( this, CUI_RES( MTR_FLD_RADIUS ) ),
	aFlAngle                ( this, CUI_RES( FL_SLANT ) ),
	aFtAngle                ( this, CUI_RES( FT_ANGLE ) ),
	aMtrAngle               ( this, CUI_RES( MTR_FLD_ANGLE ) ),
	rOutAttrs               ( rInAttrs )
{
	FreeResource();

	// this page needs ExchangeSupport
	SetExchangeSupport();

	// evaluate PoolUnit
	SfxItemPool* pPool = rOutAttrs.GetPool();
	DBG_ASSERT( pPool, "no pool (!)" );
	ePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X );
}

// -----------------------------------------------------------------------

void SvxSlantTabPage::Construct()
{
	// get the range
	DBG_ASSERT(pView, "no valid view (!)");
	eDlgUnit = GetModuleFieldUnit(GetItemSet());
	SetFieldUnit(aMtrRadius, eDlgUnit, sal_True);

	{ // #i75273#
		Rectangle aTempRect(pView->GetAllMarkedRect());
		pView->GetSdrPageView()->LogicToPagePos(aTempRect);
		maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
	}
}

// -----------------------------------------------------------------------

sal_Bool SvxSlantTabPage::FillItemSet(SfxItemSet& rAttrs)
{
	sal_Bool  bModified = sal_False;
	sal_Int32 nValue = 0L;
	String aStr = aMtrRadius.GetText();

	if( aStr != aMtrRadius.GetSavedValue() )
	{
		Fraction aUIScale = pView->GetModel()->GetUIScale();
		long nTmp = GetCoreValue( aMtrRadius, ePoolUnit );
		nTmp = Fraction( nTmp ) * aUIScale;

		rAttrs.Put( SdrEckenradiusItem( nTmp ) );
		bModified = sal_True;
	}

	aStr = aMtrAngle.GetText();

	if( aStr != aMtrAngle.GetSavedValue() )
	{
		nValue = static_cast<sal_Int32>(aMtrAngle.GetValue());
		rAttrs.Put( SfxInt32Item( SID_ATTR_TRANSFORM_SHEAR, nValue ) );
		bModified = sal_True;
	}

	if( bModified )
	{
		// Referenzpunkt setzen
		// #75897#
		Rectangle aObjectRect(pView->GetAllMarkedRect());
		pView->GetSdrPageView()->LogicToPagePos(aObjectRect);
		Point aPt = aObjectRect.Center();

		rAttrs.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X, aPt.X()));
		rAttrs.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y, aPt.Y()));
		rAttrs.Put( SfxBoolItem( SID_ATTR_TRANSFORM_SHEAR_VERTICAL, sal_False ) );
	}

	return( bModified );
}

// -----------------------------------------------------------------------

void SvxSlantTabPage::Reset(const SfxItemSet& rAttrs)
{
	// if the view has selected objects, items with SFX_ITEM_DEFAULT need to be disabled
	const SfxPoolItem* pItem;

	// Eckenradius
	if(!pView->IsEdgeRadiusAllowed())
	{
		aFlRadius.Disable();
		aFtRadius.Disable();
		aMtrRadius.Disable();
		aMtrRadius.SetText( String() );
	}
	else
	{
		pItem = GetItem( rAttrs, SDRATTR_ECKENRADIUS );

		if( pItem )
		{
			const double fUIScale(double(pView->GetModel()->GetUIScale()));
			const double fTmp((double)((const SdrEckenradiusItem*)pItem)->GetValue() / fUIScale);
			SetMetricValue(aMtrRadius, basegfx::fround(fTmp), ePoolUnit);
		}
		else
		{
			aMtrRadius.SetText( String() );
		}
	}

	aMtrRadius.SaveValue();

	// Schraegstellen: Winkel
	if( !pView->IsShearAllowed() )
	{
		aFlAngle.Disable();
		aFtAngle.Disable();
		aMtrAngle.Disable();
		aMtrAngle.SetText( String() );
	}
	else
	{
		pItem = GetItem( rAttrs, SID_ATTR_TRANSFORM_SHEAR );

		if( pItem )
		{
			aMtrAngle.SetValue( ( (const SfxInt32Item*)pItem )->GetValue() );
		}
		else
		{
			aMtrAngle.SetText( String() );
		}
	}

	aMtrAngle.SaveValue();
}

// -----------------------------------------------------------------------

SfxTabPage* SvxSlantTabPage::Create( Window* pWindow, const SfxItemSet& rOutAttrs )
{
	return( new SvxSlantTabPage( pWindow, rOutAttrs ) );
}

//------------------------------------------------------------------------

sal_uInt16* SvxSlantTabPage::GetRanges()
{
	return( pSlantRanges );
}

// -----------------------------------------------------------------------

void SvxSlantTabPage::ActivatePage( const SfxItemSet& rSet )
{
	SfxRectangleItem* pRectItem = NULL;

	if( SFX_ITEM_SET == rSet.GetItemState( GetWhich( SID_ATTR_TRANSFORM_INTERN ) , sal_False, (const SfxPoolItem**) &pRectItem ) )
	{
		const Rectangle aTempRect(pRectItem->GetValue());
		maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
	}
}

// -----------------------------------------------------------------------

int SvxSlantTabPage::DeactivatePage( SfxItemSet* _pSet )
{
    if(_pSet)
	{
        FillItemSet(*_pSet);
	}

	return LEAVE_PAGE;
}

//------------------------------------------------------------------------

void SvxSlantTabPage::PointChanged( Window* , RECT_POINT  )
{
}

/*************************************************************************
|*
|*      Dialog for changing position and size of graphic objects
|*
\************************************************************************/

SvxPositionSizeTabPage::SvxPositionSizeTabPage( Window* pParent, const SfxItemSet& rInAttrs  ) :
	SvxTabPage      ( pParent, CUI_RES( RID_SVXPAGE_POSITION_SIZE ), rInAttrs ),
	maFlPosition		( this, CUI_RES( FL_POSITION ) ),
	maFtPosX			( this, CUI_RES( FT_POS_X ) ),
	maMtrPosX			( this, CUI_RES( MTR_FLD_POS_X ) ),
	maFtPosY			( this, CUI_RES( FT_POS_Y ) ),
	maMtrPosY			( this, CUI_RES( MTR_FLD_POS_Y ) ),
    maFtPosReference    ( this, CUI_RES( FT_POSREFERENCE ) ),
    maCtlPos            ( this, CUI_RES( CTL_POSRECT ), RP_LT ),
    
    maFlSize                         ( this, CUI_RES( FL_SIZE ) ),
	maFtWidth                        ( this, CUI_RES( FT_WIDTH ) ),
	maMtrWidth                       ( this, CUI_RES( MTR_FLD_WIDTH ) ),
	maFtHeight                       ( this, CUI_RES( FT_HEIGHT ) ),
	maMtrHeight                      ( this, CUI_RES( MTR_FLD_HEIGHT ) ),
	maCbxScale                       ( this, CUI_RES( CBX_SCALE ) ),
    maFtSizeReference                ( this, CUI_RES( FT_SIZEREFERENCE) ),       
    maCtlSize                        ( this, CUI_RES( CTL_SIZERECT ), RP_LT ),
    
    maFlProtect         ( this, CUI_RES( FL_PROTECT) ),
    maTsbPosProtect     ( this, CUI_RES( TSB_POSPROTECT ) ),
    maTsbSizeProtect                 ( this, CUI_RES( TSB_SIZEPROTECT ) ),
    

    maFlAdjust                       ( this, CUI_RES( FL_ADJUST ) ),
	maTsbAutoGrowWidth				( this, CUI_RES( TSB_AUTOGROW_WIDTH ) ),
	maTsbAutoGrowHeight				( this, CUI_RES( TSB_AUTOGROW_HEIGHT ) ),

	maFlDivider						(this, CUI_RES( FL_DIVIDER ) ),
    
    mrOutAttrs       ( rInAttrs ),
    mnProtectSizeState( STATE_NOCHECK ),
    mbPageDisabled   ( sal_False ),
    mbProtectDisabled( false ),
    mbSizeDisabled( false ),
    mbAdjustDisabled( true )
{
	FreeResource();

	// this pege needs ExchangeSupport
	SetExchangeSupport();

	// evaluate PoolUnit
	SfxItemPool* pPool = mrOutAttrs.GetPool();
	DBG_ASSERT( pPool, "no pool (!)" );
	mePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X );

	meRP = RP_LT; // s.o.

	maMtrWidth.SetModifyHdl( LINK( this, SvxPositionSizeTabPage, ChangeWidthHdl ) );
	maMtrHeight.SetModifyHdl( LINK( this, SvxPositionSizeTabPage, ChangeHeightHdl ) );
	maCbxScale.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ClickAutoHdl ) );

	maTsbAutoGrowWidth.Disable();
	maTsbAutoGrowHeight.Disable();
	maFlAdjust.Disable();

	// #i2379# disable controls when protected
	maTsbPosProtect.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ChangePosProtectHdl ) );
	maTsbSizeProtect.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ChangeSizeProtectHdl ) );

	maCtlPos.SetAccessibleRelationMemberOf( &maFlPosition );
	maCtlSize.SetAccessibleRelationMemberOf( &maFlSize );
    maCtlPos.SetAccessibleRelationLabeledBy( &maFtPosReference );
	maCtlSize.SetAccessibleRelationLabeledBy( &maFtSizeReference );
}

// -----------------------------------------------------------------------

void SvxPositionSizeTabPage::Construct()
{
	// get range and work area
	DBG_ASSERT( mpView, "no valid view (!)" );
	meDlgUnit = GetModuleFieldUnit( GetItemSet() );
	SetFieldUnit( maMtrPosX, meDlgUnit, sal_True );
	SetFieldUnit( maMtrPosY, meDlgUnit, sal_True );
	SetFieldUnit( maMtrWidth, meDlgUnit, sal_True );
	SetFieldUnit( maMtrHeight, meDlgUnit, sal_True );

	if(FUNIT_MILE == meDlgUnit || FUNIT_KM == meDlgUnit)
	{
		maMtrPosX.SetDecimalDigits( 3 );
		maMtrPosY.SetDecimalDigits( 3 );
		maMtrWidth.SetDecimalDigits( 3 );
		maMtrHeight.SetDecimalDigits( 3 );
	}

	{ // #i75273#
		Rectangle aTempRect(mpView->GetAllMarkedRect());
		mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
		maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
	}

	{ // #i75273#
		Rectangle aTempRect(mpView->GetWorkArea());
		mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
		maWorkRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
	}

	// take anchor into account (Writer)
	const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();

	if(rMarkList.GetMarkCount())
	{
		const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
		maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y());

		if(!maAnchor.equalZero()) // -> Writer
		{
			for(sal_uInt16 i(1); i < rMarkList.GetMarkCount(); i++)
			{
				pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();

				if(maAnchor != basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()))
				{
					// diferent anchor positions
					maMtrPosX.SetText( String() );
					maMtrPosY.SetText( String() );
					mbPageDisabled = sal_True;
					return;
				}
			}

			// translate ranges about anchor
			maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor);
			maWorkRange = basegfx::B2DRange(maWorkRange.getMinimum() - maAnchor, maWorkRange.getMaximum() - maAnchor);
		}
	}

	// this should happen via SID_ATTR_TRANSFORM_AUTOSIZE 
	if(1 == rMarkList.GetMarkCount())
	{
		const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
		const SdrObjKind eKind((SdrObjKind)pObj->GetObjIdentifier());

		if((pObj->GetObjInventor() == SdrInventor) && 
            (OBJ_TEXT == eKind || OBJ_TITLETEXT == eKind || OBJ_OUTLINETEXT == eKind) && 
            pObj->HasText())
		{
			mbAdjustDisabled = false;
			maFlAdjust.Enable();
			maTsbAutoGrowWidth.Enable();
			maTsbAutoGrowHeight.Enable();
			maTsbAutoGrowWidth.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) );
			maTsbAutoGrowHeight.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) );

			// is used as flag to evaluate if its selectable
			maTsbAutoGrowWidth.EnableTriState( sal_False );
			maTsbAutoGrowHeight.EnableTriState( sal_False );
		}
	}

	// take scale into account
	const Fraction aUIScale(mpView->GetModel()->GetUIScale());
	lcl_ScaleRect( maWorkRange, aUIScale );
	lcl_ScaleRect( maRange, aUIScale );

	// take UI units into account
	const sal_uInt16 nDigits(maMtrPosX.GetDecimalDigits());
	lcl_ConvertRect( maWorkRange, nDigits, (MapUnit) mePoolUnit, meDlgUnit );
	lcl_ConvertRect( maRange, nDigits, (MapUnit) mePoolUnit, meDlgUnit );

	SetMinMaxPosition();
}

// -----------------------------------------------------------------------

sal_Bool SvxPositionSizeTabPage::FillItemSet( SfxItemSet& rOutAttrs )
{
	sal_Bool bModified(sal_False);

	if ( maMtrWidth.HasFocus() )
	{
		ChangeWidthHdl( this );
	}

	if ( maMtrHeight.HasFocus() )
	{
		ChangeHeightHdl( this );
	}

	if( !mbPageDisabled )
	{
		if ( maMtrPosX.IsValueModified() || maMtrPosY.IsValueModified() )
		{
			const double fUIScale(double(mpView->GetModel()->GetUIScale()));
			double fX((GetCoreValue( maMtrPosX, mePoolUnit ) + maAnchor.getX()) * fUIScale);
			double fY((GetCoreValue( maMtrPosY, mePoolUnit ) + maAnchor.getY()) * fUIScale);

			{ // #i75273#
				Rectangle aTempRect(mpView->GetAllMarkedRect());
				mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
				maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
			}

			// #101581# GetTopLeftPosition(...) needs coordinates after UI scaling, in real PagePositions
			GetTopLeftPosition(fX, fY, maRange);

			rOutAttrs.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_X), basegfx::fround(fX)));
			rOutAttrs.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_Y), basegfx::fround(fY)));

			bModified |= sal_True;
		}

		if ( maTsbPosProtect.GetState() != maTsbPosProtect.GetSavedValue() )
		{
			if( maTsbPosProtect.GetState() == STATE_DONTKNOW )
			{
				rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_POS );
			}
			else
			{
				rOutAttrs.Put(
					SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_POS ),
					maTsbPosProtect.GetState() == STATE_CHECK ? sal_True : sal_False ) );
			}

			bModified |= sal_True;
		}
	}

	if ( maMtrWidth.IsValueModified() || maMtrHeight.IsValueModified() )
	{
		Fraction aUIScale = mpView->GetModel()->GetUIScale();

		// get Width
		double nWidth = static_cast<double>(maMtrWidth.GetValue( meDlgUnit ));
		nWidth = MetricField::ConvertDoubleValue( nWidth, maMtrWidth.GetBaseValue(), maMtrWidth.GetDecimalDigits(), meDlgUnit, FUNIT_100TH_MM );
        long lWidth = long(nWidth * (double)aUIScale);
		lWidth = OutputDevice::LogicToLogic( lWidth, MAP_100TH_MM, (MapUnit)mePoolUnit );
		lWidth = static_cast<long>(maMtrWidth.Denormalize( lWidth ));

		// get Height
		double nHeight = static_cast<double>(maMtrHeight.GetValue( meDlgUnit ));
		nHeight = MetricField::ConvertDoubleValue( nHeight, maMtrHeight.GetBaseValue(), maMtrHeight.GetDecimalDigits(), meDlgUnit, FUNIT_100TH_MM );
        long lHeight = long(nHeight * (double)aUIScale);
		lHeight = OutputDevice::LogicToLogic( lHeight, MAP_100TH_MM, (MapUnit)mePoolUnit );
		lHeight = static_cast<long>(maMtrWidth.Denormalize( lHeight ));

		// put Width & Height to itemset
		rOutAttrs.Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_WIDTH ),
						(sal_uInt32) lWidth ) );
		rOutAttrs.Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_HEIGHT ),
						(sal_uInt32) lHeight ) );
		rOutAttrs.Put( SfxAllEnumItem( GetWhich( SID_ATTR_TRANSFORM_SIZE_POINT ), sal::static_int_cast< sal_uInt16 >( meRP ) ) );
		bModified |= sal_True;
	}

	if ( maTsbSizeProtect.GetState() != maTsbSizeProtect.GetSavedValue() )
	{
		if ( maTsbSizeProtect.GetState() == STATE_DONTKNOW )
			rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_SIZE );
		else
			rOutAttrs.Put(
				SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_SIZE ),
				maTsbSizeProtect.GetState() == STATE_CHECK ? sal_True : sal_False ) );
		bModified |= sal_True;
	}

	if ( maTsbAutoGrowWidth.GetState() != maTsbAutoGrowWidth.GetSavedValue() )
	{
		if ( !maTsbAutoGrowWidth.IsTriStateEnabled() )
		{
			if( maTsbAutoGrowWidth.GetState() == STATE_DONTKNOW )
				rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_AUTOWIDTH );
			else
				rOutAttrs.Put(
					SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOWIDTH ),
					maTsbAutoGrowWidth.GetState() == STATE_CHECK ? sal_True : sal_False ) );
		}
		bModified |= sal_True;
	}

	if ( maTsbAutoGrowHeight.GetState() != maTsbAutoGrowHeight.GetSavedValue() )
	{
		if ( !maTsbAutoGrowHeight.IsTriStateEnabled() )
		{
			if( maTsbAutoGrowHeight.GetState() == STATE_DONTKNOW )
				rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_AUTOHEIGHT );
			else
				rOutAttrs.Put(
					SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOHEIGHT ),
					maTsbAutoGrowHeight.GetState() == STATE_CHECK ? sal_True : sal_False ) );
		}
		bModified |= sal_True;
	}


	return bModified;
}

// -----------------------------------------------------------------------

void SvxPositionSizeTabPage::Reset( const SfxItemSet&  )
{
	const SfxPoolItem* pItem;
	const double fUIScale(double(mpView->GetModel()->GetUIScale()));

	if ( !mbPageDisabled )
	{
		pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_X );
		if ( pItem )
		{
			const double fTmp((((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getX()) / fUIScale);
			SetMetricValue(maMtrPosX, basegfx::fround(fTmp), mePoolUnit);
		}

		pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_Y );
		if ( pItem )
		{
			const double fTmp((((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getY()) / fUIScale);
			SetMetricValue(maMtrPosY, basegfx::fround(fTmp), mePoolUnit);
		}

		pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_POS );
		if ( pItem )
		{
			sal_Bool bProtected = ( ( const SfxBoolItem* )pItem )->GetValue();
			maTsbPosProtect.SetState( bProtected ? STATE_CHECK : STATE_NOCHECK );
			maTsbPosProtect.EnableTriState( sal_False );
		}
		else
		{
			maTsbPosProtect.SetState( STATE_DONTKNOW );
		}

		maTsbPosProtect.SaveValue();
		maCtlPos.Reset();

        // #i2379# Disable controls for protected objects
        ChangePosProtectHdl( this );
	}

	{ // #i75273# set width
		pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_WIDTH );
		mfOldWidth = std::max( pItem ? (double)((const SfxUInt32Item*)pItem)->GetValue() : 0.0, 1.0 );
		double fTmpWidth((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldWidth), (MapUnit)mePoolUnit, MAP_100TH_MM)) / fUIScale);

		if(maMtrWidth.GetDecimalDigits())
			fTmpWidth *= pow(10.0, maMtrWidth.GetDecimalDigits());

		fTmpWidth = MetricField::ConvertDoubleValue(fTmpWidth, maMtrWidth.GetBaseValue(), maMtrWidth.GetDecimalDigits(), FUNIT_100TH_MM, meDlgUnit);
		maMtrWidth.SetValue(static_cast<sal_Int64>(fTmpWidth), meDlgUnit);
	}

	{ // #i75273# set height
		pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_HEIGHT );
		mfOldHeight = std::max( pItem ? (double)((const SfxUInt32Item*)pItem)->GetValue() : 0.0, 1.0 );
		double fTmpHeight((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldHeight), (MapUnit)mePoolUnit, MAP_100TH_MM)) / fUIScale);

		if(maMtrHeight.GetDecimalDigits())
			fTmpHeight *= pow(10.0, maMtrHeight.GetDecimalDigits());

		fTmpHeight = MetricField::ConvertDoubleValue(fTmpHeight, maMtrHeight.GetBaseValue(), maMtrHeight.GetDecimalDigits(), FUNIT_100TH_MM, meDlgUnit);
		maMtrHeight.SetValue(static_cast<sal_Int64>(fTmpHeight), meDlgUnit);
	}

	pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_SIZE );
	if ( pItem )
	{
		maTsbSizeProtect.SetState( ( (const SfxBoolItem*)pItem )->GetValue()
							  ? STATE_CHECK : STATE_NOCHECK );
		maTsbSizeProtect.EnableTriState( sal_False );
	}
	else
		maTsbSizeProtect.SetState( STATE_DONTKNOW );

	pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOWIDTH );
	if ( pItem )
	{
		maTsbAutoGrowWidth.SetState( ( ( const SfxBoolItem* )pItem )->GetValue()
						   ? STATE_CHECK : STATE_NOCHECK );
	}
	else
		maTsbAutoGrowWidth.SetState( STATE_DONTKNOW );

	pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOHEIGHT );
	if ( pItem )
	{
		maTsbAutoGrowHeight.SetState( ( ( const SfxBoolItem* )pItem )->GetValue()
						   ? STATE_CHECK : STATE_NOCHECK );
	}
	else
		maTsbAutoGrowHeight.SetState( STATE_DONTKNOW );

	// Ist Abgleich gesetzt?
	String aStr = GetUserData();
	maCbxScale.Check( (sal_Bool)aStr.ToInt32() );

	maTsbSizeProtect.SaveValue();
	maTsbAutoGrowWidth.SaveValue();
	maTsbAutoGrowHeight.SaveValue();
	ClickSizeProtectHdl( NULL );

    // #i2379# Disable controls for protected objects
    ChangeSizeProtectHdl( this );
}

// -----------------------------------------------------------------------

SfxTabPage* SvxPositionSizeTabPage::Create( Window* pWindow, const SfxItemSet& rOutAttrs )
{
	return( new SvxPositionSizeTabPage( pWindow, rOutAttrs ) );
}

//------------------------------------------------------------------------

sal_uInt16* SvxPositionSizeTabPage::GetRanges()
{
	return( pPosSizeRanges );
}

// -----------------------------------------------------------------------

void SvxPositionSizeTabPage::ActivatePage( const SfxItemSet& rSet )
{
	SfxRectangleItem* pRectItem = NULL;

	if( SFX_ITEM_SET == rSet.GetItemState( GetWhich( SID_ATTR_TRANSFORM_INTERN ) , sal_False, (const SfxPoolItem**) &pRectItem ) )
	{
		{ // #i75273#
			const Rectangle aTempRect(pRectItem->GetValue());
			maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom());
		}

		SetMinMaxPosition();
	}
}

// -----------------------------------------------------------------------

int SvxPositionSizeTabPage::DeactivatePage( SfxItemSet* _pSet )
{
    if( _pSet )
	{
		double fX((double)maMtrPosX.GetValue());
		double fY((double)maMtrPosY.GetValue());

		GetTopLeftPosition(fX, fY, maRange);
		const Rectangle aOutRectangle(
			basegfx::fround(fX), basegfx::fround(fY),
			basegfx::fround(fX + maRange.getWidth()), basegfx::fround(fY + maRange.getHeight()));
        _pSet->Put(SfxRectangleItem(SID_ATTR_TRANSFORM_INTERN, aOutRectangle));

        FillItemSet(*_pSet);
	}

	return LEAVE_PAGE;
}

//------------------------------------------------------------------------

IMPL_LINK( SvxPositionSizeTabPage, ChangePosProtectHdl, void *, EMPTYARG )
{
    // #106572# Remember user's last choice
	maTsbSizeProtect.SetState( maTsbPosProtect.GetState() == STATE_CHECK ?  STATE_CHECK : mnProtectSizeState );
    UpdateControlStates();
	return( 0L );
}

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::UpdateControlStates()
{
	const bool bPosProtect =  maTsbPosProtect.GetState() == STATE_CHECK;
	const bool bSizeProtect = maTsbSizeProtect.GetState() == STATE_CHECK;
	const bool bHeightChecked = !maTsbAutoGrowHeight.IsTriStateEnabled() && (maTsbAutoGrowHeight.GetState() == STATE_CHECK);
	const bool bWidthChecked = !maTsbAutoGrowWidth.IsTriStateEnabled() && (maTsbAutoGrowWidth.GetState() == STATE_CHECK);

	maFlPosition.Enable( !bPosProtect && !mbPageDisabled );
	maFtPosX.Enable( !bPosProtect && !mbPageDisabled );
	maMtrPosX.Enable( !bPosProtect && !mbPageDisabled );
	maFtPosY.Enable( !bPosProtect && !mbPageDisabled );
	maMtrPosY.Enable( !bPosProtect && !mbPageDisabled );
	maFtPosReference.Enable( !bPosProtect && !mbPageDisabled );
	maCtlPos.Enable( !bPosProtect );
	maTsbPosProtect.Enable( !mbProtectDisabled && !mbPageDisabled );

	maFlSize.Enable( !mbSizeDisabled && !bSizeProtect );
	maCtlSize.Enable( !mbSizeDisabled && !bSizeProtect && (!bHeightChecked || !bWidthChecked) );
	maFtWidth.Enable( !mbSizeDisabled && !bSizeProtect && !bWidthChecked );
	maMtrWidth.Enable( !mbSizeDisabled && !bSizeProtect && !bWidthChecked );
	maFtHeight.Enable( !mbSizeDisabled && !bSizeProtect && !bHeightChecked );
	maMtrHeight.Enable( !mbSizeDisabled && !bSizeProtect && !bHeightChecked );
	maCbxScale.Enable( !mbSizeDisabled && !bSizeProtect && !bHeightChecked && !bWidthChecked );
	maFtSizeReference.Enable( !mbSizeDisabled && !bSizeProtect );
	maFlProtect.Enable( !mbProtectDisabled );
	maTsbSizeProtect.Enable( !mbProtectDisabled && !bPosProtect );

	maFlAdjust.Enable( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled );
	maTsbAutoGrowWidth.Enable( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled );
	maTsbAutoGrowHeight.Enable( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled );

	maCtlSize.Invalidate();
	maCtlPos.Invalidate();

}

//------------------------------------------------------------------------

IMPL_LINK( SvxPositionSizeTabPage, ChangeSizeProtectHdl, void *, EMPTYARG )
{
	if( maTsbSizeProtect.IsEnabled() )
	{
        // #106572# Remember user's last choice

        // Note: this works only as long as the dialog is open.  When
        // the user closes the dialog, there is no way to remember
        // whether size was enabled or disabled befor pos protect was
        // clicked. Thus, if pos protect is selected, the dialog is
        // closed and reopened again, unchecking pos protect will
        // always uncheck size protect, too. That's life.
        mnProtectSizeState = maTsbSizeProtect.GetState();
    }

    UpdateControlStates();

	return( 0L );
}

//------------------------------------------------------------------------

IMPL_LINK_INLINE_START( SvxPositionSizeTabPage, ChangePosXHdl, void *, EMPTYARG )
{
	return( 0L );
}
IMPL_LINK_INLINE_END( SvxPositionSizeTabPage, ChangePosXHdl, void *, EMPTYARG )

//------------------------------------------------------------------------

IMPL_LINK_INLINE_START( SvxPositionSizeTabPage, ChangePosYHdl, void *, EMPTYARG )
{
	return( 0L );
}
IMPL_LINK_INLINE_END( SvxPositionSizeTabPage, ChangePosYHdl, void *, EMPTYARG )

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::SetMinMaxPosition()
{
	// position
	double fLeft(maWorkRange.getMinX());
	double fTop(maWorkRange.getMinY());
	double fRight(maWorkRange.getMaxX());
	double fBottom(maWorkRange.getMaxY());

	switch ( maCtlPos.GetActualRP() )
	{
		case RP_LT:
		{
			fRight  -= maRange.getWidth();
			fBottom -= maRange.getHeight();
			break;
		}
		case RP_MT:
		{
			fLeft   += maRange.getWidth() / 2.0;
			fRight  -= maRange.getWidth() / 2.0;
			fBottom -= maRange.getHeight();
			break;
		}
		case RP_RT:
		{
			fLeft   += maRange.getWidth();
			fBottom -= maRange.getHeight();
			break;
		}
		case RP_LM:
		{
			fRight  -= maRange.getWidth();
			fTop    += maRange.getHeight() / 2.0;
			fBottom -= maRange.getHeight() / 2.0;
			break;
		}
		case RP_MM:
		{
			fLeft   += maRange.getWidth() / 2.0;
			fRight  -= maRange.getWidth() / 2.0;
			fTop    += maRange.getHeight() / 2.0;
			fBottom -= maRange.getHeight() / 2.0;
			break;
		}
		case RP_RM:
		{
			fLeft   += maRange.getWidth();
			fTop    += maRange.getHeight() / 2.0;
			fBottom -= maRange.getHeight() / 2.0;
			break;
		}
		case RP_LB:
		{
			fRight  -= maRange.getWidth();
			fTop    += maRange.getHeight();
			break;
		}
		case RP_MB:
		{
			fLeft   += maRange.getWidth() / 2.0;
			fRight  -= maRange.getWidth() / 2.0;
			fTop    += maRange.getHeight();
			break;
		}
		case RP_RB:
		{
			fLeft   += maRange.getWidth();
			fTop    += maRange.getHeight();
			break;
		}
	}

	const double fMaxLong((double)(MetricField::ConvertValue( LONG_MAX, 0, MAP_100TH_MM, meDlgUnit ) - 1L));
	fLeft = (fLeft > fMaxLong) ? fMaxLong : (fLeft < -fMaxLong) ? -fMaxLong : fLeft;
	fRight = (fRight > fMaxLong) ? fMaxLong : (fRight < -fMaxLong) ? -fMaxLong : fRight;
	fTop = (fTop > fMaxLong) ? fMaxLong : (fTop < -fMaxLong) ? -fMaxLong : fTop;
	fBottom = (fBottom > fMaxLong) ? fMaxLong : (fBottom < -fMaxLong) ? -fMaxLong : fBottom;

	// #i75273# normalizing when setting the min/max values was wrong, removed
	maMtrPosX.SetMin(basegfx::fround64(fLeft));
	maMtrPosX.SetFirst(basegfx::fround64(fLeft));
    maMtrPosX.SetMax(basegfx::fround64(fRight));
	maMtrPosX.SetLast(basegfx::fround64(fRight));
    maMtrPosY.SetMin(basegfx::fround64(fTop));
	maMtrPosY.SetFirst(basegfx::fround64(fTop));
    maMtrPosY.SetMax(basegfx::fround64(fBottom));
	maMtrPosY.SetLast(basegfx::fround64(fBottom));

	// size
	fLeft = maWorkRange.getMinX();
	fTop = maWorkRange.getMinY();
	fRight = maWorkRange.getMaxX();
	fBottom = maWorkRange.getMaxY();
	double fNewX(0);
	double fNewY(0);

	switch ( maCtlSize.GetActualRP() )
	{
		case RP_LT:
		{
			fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
			fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
			break;
		}
		case RP_MT:
		{
			fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0;
			fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
			break;
		}
		case RP_RT:
		{
			fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
			fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
			break;
		}
		case RP_LM:
		{
			fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
			fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0;
			break;
		}
		case RP_MM:
		{
			const double f1(maRange.getCenter().getX() - fLeft);
			const double f2(fRight - maRange.getCenter().getX());
			const double f3(std::min(f1, f2));
			const double f4(maRange.getCenter().getY() - fTop);
			const double f5(fBottom - maRange.getCenter().getY());
			const double f6(std::min(f4, f5));

			fNewX = f3 * 2.0;
			fNewY = f6 * 3.0;

			break;
		}
		case RP_RM:
		{
			fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
			fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0;
			break;
		}
		case RP_LB:
		{
			fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
			fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() );
			break;
		}
		case RP_MB:
		{
			fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0;
			fNewY = maWorkRange.getHeight() - ( maRange.getMaxY() - fBottom );
			break;
		}
		case RP_RB:
		{
			fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
			fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() );
			break;
		}
	}

	// #i75273# normalizing when setting the min/max values was wrong, removed
    maMtrWidth.SetMax(basegfx::fround64(fNewX));
	maMtrWidth.SetLast(basegfx::fround64(fNewX));
    maMtrHeight.SetMax(basegfx::fround64(fNewY));
	maMtrHeight.SetLast(basegfx::fround64(fNewY));
}

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::GetTopLeftPosition(double& rfX, double& rfY, const basegfx::B2DRange& rRange)
{
	switch (maCtlPos.GetActualRP())
	{
		case RP_LT:
		{
			break;
		}
		case RP_MT:
		{
			rfX -= rRange.getCenter().getX() - rRange.getMinX();
			break;
		}
		case RP_RT:
		{
			rfX -= rRange.getWidth();
			break;
		}
		case RP_LM:
		{
			rfY -= rRange.getCenter().getY() - rRange.getMinY();
			break;
		}
		case RP_MM:
		{
			rfX -= rRange.getCenter().getX() - rRange.getMinX();
			rfY -= rRange.getCenter().getY() - rRange.getMinY();
			break;
		}
		case RP_RM:
		{
			rfX -= rRange.getWidth();
			rfY -= rRange.getCenter().getY() - rRange.getMinY();
			break;
		}
		case RP_LB:
		{
			rfY -= rRange.getHeight();
			break;
		}
		case RP_MB:
		{
			rfX -= rRange.getCenter().getX() - rRange.getMinX();
			rfY -= rRange.getHeight();
			break;
		}
		case RP_RB:
		{
			rfX -= rRange.getWidth();
			rfY -= rRange.getHeight();
			break;
		}
	}
}

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::PointChanged( Window* pWindow, RECT_POINT eRP )
{
	if( pWindow == &maCtlPos )
	{
		SetMinMaxPosition();
		switch( eRP )
		{
			case RP_LT:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getMinX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getMinY()) );
				break;
			}
			case RP_MT:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getCenter().getX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getMinY()) );
				break;
			}
			case RP_RT:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getMaxX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getMinY()) );
				break;
			}
			case RP_LM:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getMinX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getCenter().getY()) );
				break;
			}
			case RP_MM:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getCenter().getX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getCenter().getY()) );
				break;
			}
			case RP_RM:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getMaxX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getCenter().getY()) );
				break;
			}
			case RP_LB:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getMinX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getMaxY()) );
				break;
			}
			case RP_MB:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getCenter().getX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getMaxY()) );
				break;
			}
			case RP_RB:
			{
				maMtrPosX.SetValue( basegfx::fround64(maRange.getMaxX()) );
				maMtrPosY.SetValue( basegfx::fround64(maRange.getMaxY()) );
				break;
			}
		}
	}
	else
	{
		meRP = eRP;

		Rectangle aTmpRect( GetRect() );
		SetMinMaxPosition();
	}
}

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::DisableResize()
{
	mbSizeDisabled = true;
}

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::DisableProtect()
{
	mbProtectDisabled = true;
}

//------------------------------------------------------------------------

Rectangle SvxPositionSizeTabPage::GetRect()
{
	double fLeft(maRange.getMinX());
	double fTop(maRange.getMinY());
	double fRight(fLeft + (double)maMtrWidth.GetValue());
	double fBottom(fTop + (double)maMtrHeight.GetValue());

	switch ( maCtlSize.GetActualRP() )
	{
		case RP_LT:
		{
			break;
		}
		case RP_MT:
		{
			fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ) / 2.0;
			break;
		}
		case RP_RT:
		{
			fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() );
			break;
		}
		case RP_LM:
		{
			fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ) / 2.0;
			break;
		}
		case RP_MM:
		{
			fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ) / 2.0;
			fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ) / 2.0;
			break;
		}
		case RP_RM:
		{
			fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() );
			fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ) / 2.0;
			break;
		}
		case RP_LB:
		{
			fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() );
			break;
		}
		case RP_MB:
		{
			fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ) / 2.0;
			fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() );
			break;
		}
		case RP_RB:
		{
			fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() );
			fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() );
			break;
		}
	}

	return Rectangle(basegfx::fround(fLeft), basegfx::fround(fTop), basegfx::fround(fRight), basegfx::fround(fBottom));
}

//------------------------------------------------------------------------

IMPL_LINK( SvxPositionSizeTabPage, ChangeWidthHdl, void *, EMPTYARG )
{
	if( maCbxScale.IsChecked() && maCbxScale.IsEnabled() )
	{
		sal_Int64 nHeight(basegfx::fround64((mfOldHeight * (double)maMtrWidth.GetValue()) / mfOldWidth));
		
		if(nHeight <= maMtrHeight.GetMax(FUNIT_NONE))
		{
			maMtrHeight.SetUserValue(nHeight, FUNIT_NONE);
		}
		else
		{
			nHeight = maMtrHeight.GetMax(FUNIT_NONE);
			maMtrHeight.SetUserValue(nHeight);
			
			const sal_Int64 nWidth(basegfx::fround64((mfOldWidth * (double)nHeight) / mfOldHeight));
			maMtrWidth.SetUserValue(nWidth, FUNIT_NONE);
		}
	}

	return( 0L );
}

//------------------------------------------------------------------------

IMPL_LINK( SvxPositionSizeTabPage, ChangeHeightHdl, void *, EMPTYARG )
{
	if( maCbxScale.IsChecked() && maCbxScale.IsEnabled() )
	{
		sal_Int64 nWidth(basegfx::fround64((mfOldWidth * (double)maMtrHeight.GetValue()) / mfOldHeight));

		if(nWidth <= maMtrWidth.GetMax(FUNIT_NONE))
		{
			maMtrWidth.SetUserValue(nWidth, FUNIT_NONE);
		}
		else
		{
			nWidth = maMtrWidth.GetMax(FUNIT_NONE);
			maMtrWidth.SetUserValue(nWidth);

			const sal_Int64 nHeight(basegfx::fround64((mfOldHeight * (double)nWidth) / mfOldWidth));
			maMtrHeight.SetUserValue(nHeight, FUNIT_NONE);
		}
	}

	return( 0L );
}

//------------------------------------------------------------------------

IMPL_LINK( SvxPositionSizeTabPage, ClickSizeProtectHdl, void *, EMPTYARG )
{
	UpdateControlStates();
	return( 0L );
}

//------------------------------------------------------------------------

IMPL_LINK( SvxPositionSizeTabPage, ClickAutoHdl, void *, EMPTYARG )
{
	if( maCbxScale.IsChecked() )
	{
		mfOldWidth  = std::max( (double)GetCoreValue( maMtrWidth,  mePoolUnit ), 1.0 );
		mfOldHeight = std::max( (double)GetCoreValue( maMtrHeight, mePoolUnit ), 1.0 );
	}

	return( 0L );
}

//------------------------------------------------------------------------

void SvxPositionSizeTabPage::FillUserData()
{
	// Abgleich wird in der Ini-Datei festgehalten
	UniString aStr = UniString::CreateFromInt32( (sal_Int32) maCbxScale.IsChecked() );
	SetUserData( aStr );
}

// eof