AOO410/main/cui/source/tabpages/page.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_cui.hxx"

// include ---------------------------------------------------------------
#include <sfx2/app.hxx>
#include <sfx2/objsh.hxx>
#include <tools/resary.hxx>
#include <vcl/graph.hxx>
#include <sfx2/viewsh.hxx>
#include <svl/itemiter.hxx>
#include <svl/languageoptions.hxx>
#include <vcl/msgbox.hxx>
#include <unotools/configitem.hxx>
#include "svx/htmlmode.hxx"

#define _SVX_PAGE_CXX

#include <cuires.hrc>
#include "page.hrc"
#include "helpid.hrc"
#include "page.hxx"
#include <svx/pageitem.hxx>
#include <editeng/brshitem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/shaditem.hxx>
#include <editeng/pbinitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/ulspitem.hxx>
#include <editeng/sizeitem.hxx>
#include <editeng/frmdiritem.hxx>
#include "svx/dlgutil.hxx"
#include <dialmgr.hxx>
#include <editeng/paperinf.hxx>
#include <dialmgr.hxx>
#include <sfx2/module.hxx>
#include <svl/stritem.hxx>
#include <svx/dialogs.hrc>  // for RID_SVXPAGE_PAGE
#include <editeng/eerdll.hxx>
#include <editeng/editrids.hrc> // for RID_SVXSTR_PAPERBIN...,
#include <svx/svxids.hrc>

// #i4219#
#include <svtools/optionsdrawinglayer.hxx>
#include <svl/slstitm.hxx> //CHINA001
#include <svl/aeitem.hxx> //CHINA001
#include <sfx2/request.hxx> //CHINA001
// configuration helper =======================================================

/** Helper to get a configuration setting.
    @descr  This is a HACK to get a configuration item directly. Normally the
    OfaHtmlOptions class from 'offmgr' project would do the job, but we cannot
    use it here. On the other hand, the OfaHtmlOptions cannot be moved to
    'svtools', because it uses 'svx' itself...
    The correct way would be to move OfaHtmlOptions to 'svtools' anyway, and to
    remove the dependency from 'svx' (a call to the static function
    SvxTextEncodingBox::GetBestMimeEncoding(), which contains low level
    operations that can be moved to lower projects, i.e. 'rtl'). Then this
    class can be removed, and the OfaHtmlOptions can be used instead. */
class SvxHtmlExportModeConfigItem_Impl : public utl::ConfigItem
{
public:
    explicit                    SvxHtmlExportModeConfigItem_Impl();

    /** Returns the HTML export mode, as read from the configuration. */
    inline sal_Int32            GetExportMode() const { return mnExpMode; }

    /** Returns true, if the current HTML export mode is set to HTML 3.2. */
    inline bool                 IsExportModeHTML32() const { return mnExpMode == 0; } // 0 == HTML_CFG_HTML32, see offmgr/htmlcfg.hxx

    virtual void    Commit();
	virtual void Notify( const com::sun::star::uno::Sequence< rtl::OUString >& _rPropertyNames);

private:
    sal_Int32                   mnExpMode;
};

SvxHtmlExportModeConfigItem_Impl::SvxHtmlExportModeConfigItem_Impl() :
    utl::ConfigItem( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Office.Common/Filter/HTML/Export" ) ) ),
    mnExpMode( 3 )  // default to 3 == HTML_CFG_NS40, see offmgr/htmlcfg.hxx
{
    using com::sun::star::uno::Sequence;
    using com::sun::star::uno::Any;

    Sequence< rtl::OUString > aPropNames( 1 );
    aPropNames[ 0 ] = rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Browser" ) );
    Sequence< Any > aPropValues( GetProperties( aPropNames ) );
    if( aPropValues.getLength() == 1 )
        aPropValues[ 0 ] >>= mnExpMode;
}

void SvxHtmlExportModeConfigItem_Impl::Commit()
{
}

void SvxHtmlExportModeConfigItem_Impl::Notify( const com::sun::star::uno::Sequence< rtl::OUString >& )
{
}

// static ----------------------------------------------------------------

static const long MINBODY 		= 284;	// 0,5cm in twips aufgerundet
//static const long PRINT_OFFSET 	= 17;	// 0,03cm in twips abgerundet
static const long PRINT_OFFSET 	= 0;	// why was this ever set to 17 ? it led to wrong right and bottom margins.

static sal_uInt16 pRanges[] =
{
	SID_ATTR_BORDER_OUTER,
	SID_ATTR_BORDER_SHADOW,
	SID_ATTR_LRSPACE,
	SID_ATTR_PAGE_SHARED,
	SID_SWREGISTER_COLLECTION,
	SID_SWREGISTER_MODE,
	0
};

// ------- Mapping Seitenlayout ------------------------------------------

sal_uInt16 aArr[] =
{
	SVX_PAGE_ALL,
	SVX_PAGE_MIRROR,
	SVX_PAGE_RIGHT,
	SVX_PAGE_LEFT
};

// -----------------------------------------------------------------------

sal_uInt16 PageUsageToPos_Impl( sal_uInt16 nUsage )
{
	const sal_uInt16 nCount = sizeof(aArr) / sizeof(sal_uInt16);

	for ( sal_uInt16 i = 0; i < nCount; ++i )
		if ( aArr[i] == ( nUsage & 0x000f ) )
			return i;
	return SVX_PAGE_ALL;
}

// -----------------------------------------------------------------------

sal_uInt16 PosToPageUsage_Impl( sal_uInt16 nPos )
{
	const sal_uInt16 nCount = sizeof(aArr) / sizeof(sal_uInt16);

	if ( nPos >= nCount )
		return 0;
	return aArr[nPos];
}

// -----------------------------------------------------------------------

Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox )
{
	Size aSz;
	aSz.Height() = rShadow.CalcShadowSpace( SHADOW_BOTTOM ) + rBox.CalcLineSpace( BOX_LINE_BOTTOM );
	aSz.Height() += rShadow.CalcShadowSpace( SHADOW_TOP ) + rBox.CalcLineSpace( BOX_LINE_TOP );
	aSz.Width() = rShadow.CalcShadowSpace( SHADOW_LEFT ) + rBox.CalcLineSpace( BOX_LINE_LEFT );
	aSz.Width() += rShadow.CalcShadowSpace( SHADOW_RIGHT ) + rBox.CalcLineSpace( BOX_LINE_RIGHT );
	return aSz;
}

// -----------------------------------------------------------------------

long ConvertLong_Impl( const long nIn, SfxMapUnit eUnit )
{
	return OutputDevice::LogicToLogic( nIn, (MapUnit)eUnit, MAP_TWIP );
}

sal_Bool IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize )
{
	if ( pSize )
	{
		Size aSize = pSize->GetSize();
		long nDiffW = Abs( rSize.Width () - aSize.Width () );
		long nDiffH = Abs( rSize.Height() - aSize.Height() );
		return ( nDiffW < 10 && nDiffH < 10 );
	}
	else
		return sal_False;
}

// -----------------------------------------------------------------------

#define MARGIN_LEFT		( (MarginPosition)0x0001 )
#define MARGIN_RIGHT	( (MarginPosition)0x0002 )
#define MARGIN_TOP		( (MarginPosition)0x0004 )
#define MARGIN_BOTTOM	( (MarginPosition)0x0008 )

struct SvxPage_Impl
{
	MarginPosition	m_nPos;
    Printer*        mpDefPrinter;
    bool            mbDelPrinter;

    SvxPage_Impl() :
        m_nPos( 0 ),
        mpDefPrinter( 0 ),
        mbDelPrinter( false ) {}

    ~SvxPage_Impl() { if ( mbDelPrinter ) delete mpDefPrinter; }
};

// class SvxPageDescPage --------------------------------------------------

// gibt den Bereich der Which-Werte zur"uck

sal_uInt16* SvxPageDescPage::GetRanges()
{
	return pRanges;
}

// -----------------------------------------------------------------------

SfxTabPage* SvxPageDescPage::Create( Window* pParent, const SfxItemSet& rSet )
{
	return new SvxPageDescPage( pParent, rSet );
}

// -----------------------------------------------------------------------

SvxPageDescPage::SvxPageDescPage( Window* pParent, const SfxItemSet& rAttr ) :

	SfxTabPage( pParent, CUI_RES( RID_SVXPAGE_PAGE ), rAttr ),

    aPaperSizeFl        ( this, CUI_RES( FL_PAPER_SIZE ) ),
    aPaperFormatText    ( this, CUI_RES( FT_PAPER_FORMAT ) ),
    aPaperSizeBox       ( this, CUI_RES( LB_PAPER_SIZE ) ),
    aPaperWidthText     ( this, CUI_RES( FT_PAPER_WIDTH ) ),
    aPaperWidthEdit     ( this, CUI_RES( ED_PAPER_WIDTH ) ),
    aPaperHeightText    ( this, CUI_RES( FT_PAPER_HEIGHT ) ),
    aPaperHeightEdit    ( this, CUI_RES( ED_PAPER_HEIGHT ) ),
    aOrientationFT      ( this, CUI_RES( FT_ORIENTATION ) ),
	aPortraitBtn        ( this, CUI_RES( RB_PORTRAIT ) ),
    aLandscapeBtn       ( this, CUI_RES( RB_LANDSCAPE ) ),
	aBspWin             ( this, CUI_RES( WN_BSP ) ),
    aTextFlowLbl        ( this, CUI_RES( FT_TEXT_FLOW ) ),
    aTextFlowBox        ( this, CUI_RES( LB_TEXT_FLOW ) ),
	aPaperTrayLbl       ( this, CUI_RES( FT_PAPER_TRAY ) ),
    aPaperTrayBox       ( this, CUI_RES( LB_PAPER_TRAY ) ),
	aMarginFl           ( this, CUI_RES( FL_MARGIN ) ),
    aLeftMarginLbl      ( this, CUI_RES( FT_LEFT_MARGIN ) ),
	aLeftMarginEdit		( this, CUI_RES( ED_LEFT_MARGIN ) ),
	aRightMarginLbl		( this, CUI_RES( FT_RIGHT_MARGIN ) ),
	aRightMarginEdit	( this, CUI_RES( ED_RIGHT_MARGIN ) ),
	aTopMarginLbl		( this, CUI_RES( FT_TOP_MARGIN ) ),
	aTopMarginEdit		( this, CUI_RES( ED_TOP_MARGIN ) ),
	aBottomMarginLbl	( this, CUI_RES( FT_BOTTOM_MARGIN ) ),
	aBottomMarginEdit	( this, CUI_RES( ED_BOTTOM_MARGIN ) ),
    aBottomSeparatorFl  ( this, CUI_RES( FL_BOTTOM_SEP ) ),
    aLayoutFL           ( this, CUI_RES( FL_LAYOUT ) ),
	aPageText			( this, CUI_RES( FT_PAGELAYOUT ) ),
    aLayoutBox          ( this, CUI_RES( LB_LAYOUT ) ),
	aNumberFormatText	( this, CUI_RES( FT_NUMBER_FORMAT ) ),
	aNumberFormatBox	( this, CUI_RES( LB_NUMBER_FORMAT ) ),
    aTblAlignFT         ( this, CUI_RES( FT_TBL_ALIGN ) ),
    aHorzBox            ( this, CUI_RES( CB_HORZ ) ),
	aVertBox			( this, CUI_RES( CB_VERT ) ),
	aAdaptBox			( this, CUI_RES( CB_ADAPT ) ),
	aRegisterCB         ( this, CUI_RES( CB_REGISTER ) ),
	aRegisterFT         ( this, CUI_RES( FT_REGISTER ) ),
	aRegisterLB       	( this, CUI_RES( LB_REGISTER ) ),

	aInsideText			( 		CUI_RES( STR_INSIDE ) ),
	aOutsideText		( 		CUI_RES( STR_OUTSIDE ) ),
	aPrintRangeQueryText(		CUI_RES( STR_QUERY_PRINTRANGE ) ),

	bLandscape			( sal_False ),
	eMode				( SVX_PAGE_MODE_STANDARD ),
	ePaperStart			( PAPER_A3 ),
	ePaperEnd 			( PAPER_ENV_DL ),
	pImpl				( new SvxPage_Impl )

{
	bBorderModified = sal_False;
	FreeResource();
    aBspWin.EnableRTL( sal_False );

	// diese Page braucht ExchangeSupport
	SetExchangeSupport();

    SvtLanguageOptions aLangOptions;
    sal_Bool bCJK = aLangOptions.IsAsianTypographyEnabled();
    sal_Bool bCTL = aLangOptions.IsCTLFontEnabled();
    sal_Bool bWeb = sal_False;
    const SfxPoolItem* pItem;

    SfxObjectShell* pShell;
    if(SFX_ITEM_SET == rAttr.GetItemState(SID_HTML_MODE, sal_False, &pItem) ||
		( 0 != (pShell = SfxObjectShell::Current()) &&
					0 != (pItem = pShell->GetItem(SID_HTML_MODE))))
        bWeb = 0 != (((const SfxUInt16Item*)pItem)->GetValue() & HTMLMODE_ON);

    // #109989# get the HTML export setting from configuration.
    // !! This is a hack, see comments in SvxHtmlExportModeConfigItem_Impl class above.
    bool bHTML32 = SvxHtmlExportModeConfigItem_Impl().IsExportModeHTML32();

    //  fill text flow listbox with valid entries
    aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_LTR_HORI ), FRMDIR_HORI_LEFT_TOP );
    if( bCTL )
        aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_RTL_HORI ), FRMDIR_HORI_RIGHT_TOP );
    // #109989# do not show vertical directions in Writer/Web
    if( !bWeb )
    {
        if( bCJK )
        {
            aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_RTL_VERT ), FRMDIR_VERT_TOP_RIGHT );
//            aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_LTR_VERT ), FRMDIR_VERT_TOP_LEFT );
        }
    }

    // #109989# show the text direction box in Writer/Web too, but only, if HTML export mode is not HTML3.2.
    if( !(bWeb && bHTML32) && (bCJK || bCTL) &&
        SFX_ITEM_UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION )))
    {
        aTextFlowLbl.Show();
        aTextFlowBox.Show();
        aTextFlowBox.SetSelectHdl(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl ));

        aBspWin.EnableFrameDirection(sal_True);
    }
    Init_Impl();

	FieldUnit eFUnit = GetModuleFieldUnit( rAttr );
	SetFieldUnit( aLeftMarginEdit, eFUnit );
	SetFieldUnit( aRightMarginEdit, eFUnit );
	SetFieldUnit( aTopMarginEdit, eFUnit );
	SetFieldUnit( aBottomMarginEdit, eFUnit );
	SetFieldUnit( aPaperWidthEdit, eFUnit );
	SetFieldUnit( aPaperHeightEdit, eFUnit );

    if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() )
        pImpl->mpDefPrinter = (Printer*)SfxViewShell::Current()->GetPrinter();
	else
	{
        pImpl->mpDefPrinter = new Printer;
        pImpl->mbDelPrinter = true;
	}

    MapMode aOldMode = pImpl->mpDefPrinter->GetMapMode();
    pImpl->mpDefPrinter->SetMapMode( MAP_TWIP );

	// First- und Last-Werte f"ur die R"ander setzen
    Size aPaperSize = pImpl->mpDefPrinter->GetPaperSize();
    Size aPrintSize = pImpl->mpDefPrinter->GetOutputSize();
	/*
	 * einen Punkt ( 0,0 ) in logische Koordinaten zu konvertieren,
	 * sieht aus wie Unsinn; ist aber sinnvoll, wenn der Ursprung des
	 * Koordinatensystems verschoben ist.
	 */
    Point aPrintOffset = pImpl->mpDefPrinter->GetPageOffset() -
                         pImpl->mpDefPrinter->PixelToLogic( Point() );
    pImpl->mpDefPrinter->SetMapMode( aOldMode );

    long nOffset = !aPrintOffset.X() && !aPrintOffset.Y() ? 0 : PRINT_OFFSET;
	aLeftMarginEdit.SetFirst( aLeftMarginEdit.Normalize( aPrintOffset.X() ), FUNIT_TWIP );
	nFirstLeftMargin = static_cast<long>(aLeftMarginEdit.GetFirst());
	aRightMarginEdit.SetFirst( aRightMarginEdit.Normalize(
		aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X() + nOffset ), FUNIT_TWIP);
	nFirstRightMargin = static_cast<long>(aRightMarginEdit.GetFirst());
	aTopMarginEdit.SetFirst( aTopMarginEdit.Normalize( aPrintOffset.Y() ), FUNIT_TWIP );
	nFirstTopMargin = static_cast<long>(aTopMarginEdit.GetFirst());
	aBottomMarginEdit.SetFirst( aBottomMarginEdit.Normalize(
		aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y() + nOffset ), FUNIT_TWIP );
	nFirstBottomMargin = static_cast<long>(aBottomMarginEdit.GetFirst());
	aLeftMarginEdit.SetLast( aLeftMarginEdit.Normalize(
		aPrintOffset.X() + aPrintSize.Width() ), FUNIT_TWIP );
	nLastLeftMargin = static_cast<long>(aLeftMarginEdit.GetLast());
	aRightMarginEdit.SetLast( aRightMarginEdit.Normalize(
		aPrintOffset.X() + aPrintSize.Width() ), FUNIT_TWIP );
	nLastRightMargin = static_cast<long>(aRightMarginEdit.GetLast());
	aTopMarginEdit.SetLast( aTopMarginEdit.Normalize(
		aPrintOffset.Y() + aPrintSize.Height() ), FUNIT_TWIP );
	nLastTopMargin = static_cast<long>(aTopMarginEdit.GetLast());
	aBottomMarginEdit.SetLast( aBottomMarginEdit.Normalize(
		aPrintOffset.Y() + aPrintSize.Height() ), FUNIT_TWIP );
	nLastBottomMargin = static_cast<long>(aBottomMarginEdit.GetLast());

	// #i4219# get DrawingLayer options
    const SvtOptionsDrawinglayer aDrawinglayerOpt;

	// #i4219# take Maximum now from configuration (1/100th cm)
	// was: 11900 -> 119 cm ;new value 3 meters -> 300 cm -> 30000
	aPaperWidthEdit.SetMax(aPaperWidthEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FUNIT_CM);
	aPaperWidthEdit.SetLast(aPaperWidthEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FUNIT_CM);
	aPaperHeightEdit.SetMax(aPaperHeightEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FUNIT_CM);
	aPaperHeightEdit.SetLast(aPaperHeightEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FUNIT_CM);

	// #i4219# also for margins (1/100th cm). Was: 9999, keeping.
	aLeftMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperLeftMargin());
	aLeftMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperLeftMargin());
	aRightMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperRightMargin());
	aRightMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperRightMargin());
	aTopMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperTopMargin());
	aTopMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperTopMargin());
	aBottomMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperBottomMargin());
	aBottomMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperBottomMargin());

	aPortraitBtn.SetAccessibleRelationMemberOf(&aOrientationFT);
	aLandscapeBtn.SetAccessibleRelationMemberOf(&aOrientationFT);	
}

// -----------------------------------------------------------------------

SvxPageDescPage::~SvxPageDescPage()
{
	delete pImpl;
}

// -----------------------------------------------------------------------

void SvxPageDescPage::Init_Impl()
{
	aLeftText = aLeftMarginLbl.GetText();
	aRightText = aRightMarginLbl.GetText();

		// Handler einstellen
	aLayoutBox.SetSelectHdl( LINK( this, SvxPageDescPage, LayoutHdl_Impl ) );
    aPaperSizeBox.SetDropDownLineCount(10);

	aPaperTrayBox.SetGetFocusHdl(
		LINK( this, SvxPageDescPage, PaperBinHdl_Impl ) );
	aPaperSizeBox.SetSelectHdl(
		LINK( this, SvxPageDescPage, PaperSizeSelect_Impl ) );
	aPaperWidthEdit.SetModifyHdl(
		LINK( this, SvxPageDescPage, PaperSizeModify_Impl ) );
	aPaperHeightEdit.SetModifyHdl(
		LINK( this, SvxPageDescPage, PaperSizeModify_Impl ) );
	aLandscapeBtn.SetClickHdl(
		LINK( this, SvxPageDescPage, SwapOrientation_Impl ) );
	aPortraitBtn.SetClickHdl(
		LINK( this, SvxPageDescPage, SwapOrientation_Impl ) );

	Link aLink = LINK( this, SvxPageDescPage, BorderModify_Impl );
	aLeftMarginEdit.SetModifyHdl( aLink );
	aRightMarginEdit.SetModifyHdl( aLink );
	aTopMarginEdit.SetModifyHdl( aLink );
	aBottomMarginEdit.SetModifyHdl( aLink );

	aLink = LINK( this, SvxPageDescPage, RangeHdl_Impl );
	aPaperWidthEdit.SetLoseFocusHdl( aLink );
	aPaperHeightEdit.SetLoseFocusHdl( aLink );
	aLeftMarginEdit.SetLoseFocusHdl( aLink );
	aRightMarginEdit.SetLoseFocusHdl( aLink );
	aTopMarginEdit.SetLoseFocusHdl( aLink );
	aBottomMarginEdit.SetLoseFocusHdl( aLink );

	aHorzBox.SetClickHdl( LINK( this, SvxPageDescPage, CenterHdl_Impl ) );
	aVertBox.SetClickHdl( LINK( this, SvxPageDescPage, CenterHdl_Impl ) );

}

// -----------------------------------------------------------------------

void SvxPageDescPage::Reset( const SfxItemSet& rSet )
{
	SfxItemPool* pPool = rSet.GetPool();
	DBG_ASSERT( pPool, "Wo ist der Pool" );
	SfxMapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) );

	// R"ander (Links/Rechts) einstellen
	const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_LRSPACE );

	if ( pItem )
	{
		const SvxLRSpaceItem& rLRSpace = (const SvxLRSpaceItem&)*pItem;
		SetMetricValue( aLeftMarginEdit, rLRSpace.GetLeft(), eUnit );
		aBspWin.SetLeft(
			(sal_uInt16)ConvertLong_Impl( (long)rLRSpace.GetLeft(), eUnit ) );
		SetMetricValue( aRightMarginEdit, rLRSpace.GetRight(), eUnit );
		aBspWin.SetRight(
			(sal_uInt16)ConvertLong_Impl( (long)rLRSpace.GetRight(), eUnit ) );
	}

	// R"ander (Oben/Unten) einstellen
	pItem = GetItem( rSet, SID_ATTR_ULSPACE );

	if ( pItem )
	{
		const SvxULSpaceItem& rULSpace = (const SvxULSpaceItem&)*pItem;
		SetMetricValue( aTopMarginEdit, rULSpace.GetUpper(), eUnit );
		aBspWin.SetTop(
			(sal_uInt16)ConvertLong_Impl( (long)rULSpace.GetUpper(), eUnit ) );
		SetMetricValue( aBottomMarginEdit, rULSpace.GetLower(), eUnit );
		aBspWin.SetBottom(
			(sal_uInt16)ConvertLong_Impl( (long)rULSpace.GetLower(), eUnit ) );
	}

    // allgemeine Seitendaten
	SvxNumType eNumType = SVX_ARABIC;
    bLandscape = ( pImpl->mpDefPrinter->GetOrientation() == ORIENTATION_LANDSCAPE );
	sal_uInt16 nUse = (sal_uInt16)SVX_PAGE_ALL;
	pItem = GetItem( rSet, SID_ATTR_PAGE );

	if ( pItem )
	{
		const SvxPageItem& rItem = (const SvxPageItem&)*pItem;
		eNumType = rItem.GetNumType();
		nUse = rItem.GetPageUsage();
		bLandscape = rItem.IsLandscape();
	}

	// Ausrichtung
	aLayoutBox.SelectEntryPos( ::PageUsageToPos_Impl( nUse ) );
	aBspWin.SetUsage( nUse );
	LayoutHdl_Impl( 0 );

	// Numerierungsart der Seitenvorlage einstellen
	aNumberFormatBox.SelectEntryPos( sal::static_int_cast< sal_uInt16 >(eNumType) );

	// Aktueller Papierschacht
	aPaperTrayBox.Clear();
	sal_uInt8 nPaperBin = PAPERBIN_PRINTER_SETTINGS;
	pItem = GetItem( rSet, SID_ATTR_PAGE_PAPERBIN );

	if ( pItem )
	{
		nPaperBin = ( (const SvxPaperBinItem*)pItem )->GetValue();

        if ( nPaperBin >= pImpl->mpDefPrinter->GetPaperBinCount() )
			nPaperBin = PAPERBIN_PRINTER_SETTINGS;
	}

	String aBinName;

	if ( PAPERBIN_PRINTER_SETTINGS	== nPaperBin )
		aBinName = EE_RESSTR( RID_SVXSTR_PAPERBIN_SETTINGS );
	else
        aBinName = pImpl->mpDefPrinter->GetPaperBinName( (sal_uInt16)nPaperBin );

	sal_uInt16 nEntryPos = aPaperTrayBox.InsertEntry( aBinName );
	aPaperTrayBox.SetEntryData( nEntryPos, (void*)(sal_uLong)nPaperBin );
	aPaperTrayBox.SelectEntry( aBinName );

	// Size rausholen
    Size aPaperSize = SvxPaperInfo::GetPaperSize( pImpl->mpDefPrinter );
	pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE );

	if ( pItem )
		aPaperSize = ( (const SvxSizeItem*)pItem )->GetSize();

	FASTBOOL bOrientationSupport =
        pImpl->mpDefPrinter->HasSupport( SUPPORT_SET_ORIENTATION );
#ifdef OS2
	// unter OS/2 wird bei HasSupport() immer sal_True returned
	// aber nur als Dummy, deshalb FALSE
	bOrientationSupport = sal_False;
#endif

	if ( !bOrientationSupport &&
		 aPaperSize.Width() > aPaperSize.Height() )
		bLandscape = sal_True;

	aLandscapeBtn.Check( bLandscape );
	aPortraitBtn.Check( !bLandscape );

	aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ),
						   ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) );

	aPaperSize = OutputDevice::LogicToLogic(aPaperSize, (MapUnit)eUnit, MAP_100TH_MM);
	if ( bLandscape )
		Swap( aPaperSize );

	// Actual Paper Format
	Paper ePaper = SvxPaperInfo::GetSvxPaper( aPaperSize, MAP_100TH_MM, sal_True );

	if ( PAPER_USER != ePaper )
		aPaperSize = SvxPaperInfo::GetPaperSize( ePaper, MAP_100TH_MM );

	if ( bLandscape )
		Swap( aPaperSize );

	// Werte in die Edits eintragen
	SetMetricValue( aPaperHeightEdit, aPaperSize.Height(), SFX_MAPUNIT_100TH_MM );
	SetMetricValue( aPaperWidthEdit, aPaperSize.Width(), SFX_MAPUNIT_100TH_MM );
	aPaperSizeBox.Clear();

	sal_uInt16 nActPos = LISTBOX_ENTRY_NOTFOUND;
	sal_uInt16 nAryId = RID_SVXSTRARY_PAPERSIZE_STD;

	if ( ePaperStart != PAPER_A3 )
		nAryId = RID_SVXSTRARY_PAPERSIZE_DRAW;
	ResStringArray aPaperAry( CUI_RES( nAryId ) );
	sal_uInt32 nCnt = aPaperAry.Count();

    sal_uInt16 nUserPos = LISTBOX_ENTRY_NOTFOUND;
	for ( sal_uInt32 i = 0; i < nCnt; ++i )
	{
		String aStr = aPaperAry.GetString(i);
		Paper eSize = (Paper)aPaperAry.GetValue(i);
		sal_uInt16 nPos = aPaperSizeBox.InsertEntry( aStr );
		aPaperSizeBox.SetEntryData( nPos, (void*)(sal_uLong)eSize );

		if ( eSize == ePaper )
			nActPos = nPos;
        if( eSize == PAPER_USER )
            nUserPos = nPos;
	}
	// preselect current paper format - #115915#: ePaper might not be in aPaperSizeBox so use PAPER_USER instead
    aPaperSizeBox.SelectEntryPos( nActPos != LISTBOX_ENTRY_NOTFOUND ? nActPos : nUserPos );

    // Applikationsspezifisch

	switch ( eMode )
	{
		case SVX_PAGE_MODE_CENTER:
		{
            aTblAlignFT.Show();
            aHorzBox.Show();
			aVertBox.Show();
            DisableVerticalPageDir();

			// Horizontale Ausrichtung
			pItem = GetItem( rSet, SID_ATTR_PAGE_EXT1 );
			aHorzBox.Check( pItem ? ( (const SfxBoolItem*)pItem )->GetValue()
								  : sal_False );

			// Vertikale Ausrichtung
			pItem = GetItem( rSet, SID_ATTR_PAGE_EXT2 );
			aVertBox.Check( pItem ? ( (const SfxBoolItem*)pItem )->GetValue()
								  : sal_False );

			// Beispiel-Fenster auf Tabelle setzen
			aBspWin.SetTable( sal_True );
			aBspWin.SetHorz( aHorzBox.IsChecked() );
			aBspWin.SetVert( aVertBox.IsChecked() );

			break;
		}

		case SVX_PAGE_MODE_PRESENTATION:
		{
            DisableVerticalPageDir();
			aAdaptBox.Show();
			pItem = GetItem( rSet, SID_ATTR_PAGE_EXT1 );
			aAdaptBox.Check( pItem ?
				( (const SfxBoolItem*)pItem )->GetValue() : sal_False );

			//!!! hidden, weil von StarDraw nicht implementiert
			aLayoutBox.Hide();
			aPageText.Hide();

			break;
		}
        default: ;//prevent warning
	}


	// im Beispiel Hintergrund und Umrandung anzeigen
	ResetBackground_Impl( rSet );
//!	UpdateExample_Impl();
	RangeHdl_Impl( 0 );

	// Header Footer anzeigen
	InitHeadFoot_Impl( rSet );

	// R"ander auf Hoch/Quer updaten, dann Beispiel updaten
	bBorderModified = sal_False;
	SwapFirstValues_Impl( sal_False );
	UpdateExample_Impl();

	// Alte Werte sichern
	aLeftMarginEdit.SaveValue();
	aRightMarginEdit.SaveValue();
	aTopMarginEdit.SaveValue();
	aBottomMarginEdit.SaveValue();
	aLayoutBox.SaveValue();
	aNumberFormatBox.SaveValue();
	aPaperSizeBox.SaveValue();
	aPaperWidthEdit.SaveValue();
	aPaperHeightEdit.SaveValue();
	aPortraitBtn.SaveValue();
	aLandscapeBtn.SaveValue();
	aPaperTrayBox.SaveValue();
	aVertBox.SaveValue();
	aHorzBox.SaveValue();
    aAdaptBox.SaveValue();

	CheckMarginEdits( true );

	// Registerhaltigkeit
	if(SFX_ITEM_SET == rSet.GetItemState(SID_SWREGISTER_MODE))
	{
		aRegisterCB.Check(((const SfxBoolItem&)rSet.Get(
								SID_SWREGISTER_MODE)).GetValue());
		aRegisterCB.SaveValue();
		RegisterModify(&aRegisterCB);
	}
	if(SFX_ITEM_SET == rSet.GetItemState(SID_SWREGISTER_COLLECTION))
	{
		aRegisterLB.SelectEntry(
				((const SfxStringItem&)rSet.Get(SID_SWREGISTER_COLLECTION)).GetValue());
		aRegisterLB.SaveValue();
	}

	SfxItemState eState = rSet.GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ),
												sal_True, &pItem );
	if( SFX_ITEM_UNKNOWN != eState )
	{
        sal_uInt32 nVal  = SFX_ITEM_SET == eState
								? ((SvxFrameDirectionItem*)pItem)->GetValue()
                                : 0;
        aTextFlowBox.SelectEntryValue( static_cast< SvxFrameDirection >( nVal ) );
		aTextFlowBox.SaveValue();
        aBspWin.SetFrameDirection(nVal);
	}
}

// -----------------------------------------------------------------------

void SvxPageDescPage::FillUserData()
{
	if ( SVX_PAGE_MODE_PRESENTATION == eMode )
		SetUserData( UniString::CreateFromInt32( (sal_Int32)aAdaptBox.IsChecked() ) );
}

// -----------------------------------------------------------------------

sal_Bool SvxPageDescPage::FillItemSet( SfxItemSet& rSet )
{
	sal_Bool bModified = sal_False;
	const SfxItemSet& rOldSet = GetItemSet();
	SfxItemPool* pPool = rOldSet.GetPool();
	DBG_ASSERT( pPool, "Wo ist der Pool" );
	sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE );
	SfxMapUnit eUnit = pPool->GetMetric( nWhich );
	const SfxPoolItem* pOld = 0;

	// alten linken und rechten Rand kopieren
	SvxLRSpaceItem aMargin( (const SvxLRSpaceItem&)rOldSet.Get( nWhich ) );

	// alten  oberen und unteren Rand kopieren
	nWhich = GetWhich( SID_ATTR_ULSPACE );
	SvxULSpaceItem aTopMargin( (const SvxULSpaceItem&)rOldSet.Get( nWhich ) );

	if ( aLeftMarginEdit.GetText() != aLeftMarginEdit.GetSavedValue() )
	{
		aMargin.SetLeft( (sal_uInt16)GetCoreValue( aLeftMarginEdit, eUnit ) );
		bModified |= sal_True;
	}

	if ( aRightMarginEdit.GetText() != aRightMarginEdit.GetSavedValue() )
	{
		aMargin.SetRight( (sal_uInt16)GetCoreValue( aRightMarginEdit, eUnit ) );
		bModified |= sal_True;
	}

	// Linken und rechten Rand setzen
	if ( bModified )
	{
		pOld = GetOldItem( rSet, SID_ATTR_LRSPACE );

		if ( !pOld || !( *(const SvxLRSpaceItem*)pOld == aMargin ) )
			rSet.Put( aMargin );
		else
			bModified = sal_False;
	}

	sal_Bool bMod = sal_False;

	if ( aTopMarginEdit.GetText() != aTopMarginEdit.GetSavedValue() )
	{
		aTopMargin.SetUpper( (sal_uInt16)GetCoreValue( aTopMarginEdit, eUnit ) );
		bMod |= sal_True;
	}

	if ( aBottomMarginEdit.GetText() != aBottomMarginEdit.GetSavedValue() )
	{
		aTopMargin.SetLower( (sal_uInt16)GetCoreValue( aBottomMarginEdit, eUnit ) );
		bMod |= sal_True;
	}

	// unteren oberen Rand setzen
	//
	if ( bMod )
	{
		pOld = GetOldItem( rSet, SID_ATTR_ULSPACE );

		if ( !pOld || !( *(const SvxULSpaceItem*)pOld == aTopMargin ) )
		{
			bModified |= sal_True;
			rSet.Put( aTopMargin );
		}
	}

	// Druckerschacht
	nWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN );
	sal_uInt16 nPos = aPaperTrayBox.GetSelectEntryPos();
	sal_uInt16 nBin = (sal_uInt16)(sal_uLong)aPaperTrayBox.GetEntryData( nPos );
	pOld = GetOldItem( rSet, SID_ATTR_PAGE_PAPERBIN );

	if ( !pOld || ( (const SvxPaperBinItem*)pOld )->GetValue() != nBin )
	{
		rSet.Put( SvxPaperBinItem( nWhich, (sal_uInt8)nBin ) );
		bModified |= sal_True;
	}

	nPos = aPaperSizeBox.GetSelectEntryPos();
	Paper ePaper = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData( nPos );
	const sal_uInt16 nOld = aPaperSizeBox.GetSavedValue();
	sal_Bool bChecked = aLandscapeBtn.IsChecked();

	if ( PAPER_USER == ePaper )
	{
		if ( nOld != nPos						||
			 aPaperWidthEdit.IsValueModified()  ||
			 aPaperHeightEdit.IsValueModified() ||
			 bChecked != aLandscapeBtn.GetSavedValue() )
		{
			Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ),
						GetCoreValue( aPaperHeightEdit, eUnit ) );
			pOld = GetOldItem( rSet, SID_ATTR_PAGE_SIZE );

			if ( !pOld || ( (const SvxSizeItem*)pOld )->GetSize() != aSize )
			{
				rSet.Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
				bModified |= sal_True;
			}
		}
	}
	else
	{
		if ( nOld != nPos || bChecked != aLandscapeBtn.GetSavedValue() )
		{
			Size aSize( SvxPaperInfo::GetPaperSize( ePaper, (MapUnit)eUnit ) );

			if ( bChecked )
				Swap( aSize );

			pOld = GetOldItem( rSet, SID_ATTR_PAGE_SIZE );

			if ( !pOld || ( (const SvxSizeItem*)pOld )->GetSize() != aSize )
			{
				rSet.Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
				bModified |= sal_True;
			}
		}
	}

	// sonstiges Zeug der Page
	nWhich = GetWhich( SID_ATTR_PAGE );
	SvxPageItem aPage( (const SvxPageItem&)rOldSet.Get( nWhich ) );
	bMod = 	aLayoutBox.GetSelectEntryPos()  != aLayoutBox.GetSavedValue();

	if ( bMod )
		aPage.SetPageUsage(
			::PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ) );

	if ( bChecked != aLandscapeBtn.GetSavedValue() )
	{
		aPage.SetLandscape(bChecked);
		bMod |= sal_True;
	}

	// Einstellen der Numerierungsart der Seite
	nPos = aNumberFormatBox.GetSelectEntryPos();

	if ( nPos != aNumberFormatBox.GetSavedValue() )
	{
		aPage.SetNumType( (SvxNumType)nPos );
		bMod |= sal_True;
	}

	if ( bMod )
	{
		pOld = GetOldItem( rSet, SID_ATTR_PAGE );

		if ( !pOld || !( *(const SvxPageItem*)pOld == aPage ) )
		{
			rSet.Put( aPage );
			bModified |= sal_True;
		}
	}
	else if ( SFX_ITEM_DEFAULT == rOldSet.GetItemState( nWhich ) )
		rSet.ClearItem( nWhich );
	else
		rSet.Put( rOldSet.Get( nWhich ) );

	// Modispezifische Controls auswerten

	switch ( eMode )
	{
		case SVX_PAGE_MODE_CENTER:
		{
			if ( aHorzBox.IsChecked() != aHorzBox.GetSavedValue() )
			{
				SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ),
								   aHorzBox.IsChecked() );
				rSet.Put( aHorz );
				bModified |= sal_True;
			}

			if ( aVertBox.IsChecked() != aVertBox.GetSavedValue() )
			{
				SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ),
								   aVertBox.IsChecked() );
				rSet.Put( aVert );
				bModified |= sal_True;
			}
			break;
		}

		case SVX_PAGE_MODE_PRESENTATION:
		{
			// immer putten, damit Draw das auswerten kann
			rSet.Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ),
					  aAdaptBox.IsChecked() ) );
			bModified |= sal_True;
			break;
		}
        default: ;//prevent warning

	}

	if(aRegisterCB.IsVisible() &&
		(aRegisterCB.IsChecked() || aRegisterCB.GetSavedValue() != aRegisterCB.IsChecked()))
	{
		const SfxBoolItem& rRegItem = (const SfxBoolItem&)rOldSet.Get(SID_SWREGISTER_MODE);
		SfxBoolItem* pRegItem = (SfxBoolItem*)rRegItem.Clone();
		sal_Bool bCheck = aRegisterCB.IsChecked();
		pRegItem->SetValue(bCheck);
		rSet.Put(*pRegItem);
		bModified |= sal_True;
		if(bCheck)
		{
			bModified |= sal_True;
			rSet.Put(SfxStringItem(SID_SWREGISTER_COLLECTION,
							aRegisterLB.GetSelectEntry()));
		}
		delete pRegItem;
	}

    SvxFrameDirection eDirection = aTextFlowBox.GetSelectEntryValue();
    if( aTextFlowBox.IsVisible() && (eDirection != aTextFlowBox.GetSavedValue()) )
	{
        rSet.Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) );
		bModified = sal_True;
	}

	return bModified;
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, LayoutHdl_Impl, ListBox *, EMPTYARG )
{
	// innen au\sen umschalten
	const sal_uInt16 nPos = PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() );

	if ( nPos == SVX_PAGE_MIRROR )
	{
		if ( aLeftMarginLbl.GetText() != aInsideText )
			aLeftMarginLbl.SetText( aInsideText );

		if ( aRightMarginLbl.GetText() != aOutsideText )
			aRightMarginLbl.SetText( aOutsideText );
	}
	else
	{
		if ( aLeftMarginLbl.GetText() != aLeftText )
			aLeftMarginLbl.SetText( aLeftText );

		if ( aRightMarginLbl.GetText() != aRightText )
			aRightMarginLbl.SetText( aRightText );
	}
    UpdateExample_Impl( true );
	return 0;
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, PaperBinHdl_Impl, ListBox *, EMPTYARG )
{
	if ( aPaperTrayBox.GetEntryCount() > 1 )
		// schon gef"ullt
		return 0;

	// Schacht-Box initialisieren
	String aOldName = aPaperTrayBox.GetSelectEntry();
	aPaperTrayBox.SetUpdateMode( sal_False );
	aPaperTrayBox.Clear();
	sal_uInt16 nEntryPos = aPaperTrayBox.InsertEntry(
		EE_RESSTR( RID_SVXSTR_PAPERBIN_SETTINGS ) );
	aPaperTrayBox.SetEntryData( nEntryPos,
		(void*)(sal_uLong)PAPERBIN_PRINTER_SETTINGS );
	String aPaperBin( EditResId( RID_SVXSTR_PAPERBIN ) );
    sal_uInt16 nBinCount = pImpl->mpDefPrinter->GetPaperBinCount();

	for ( sal_uInt16 i = 0; i < nBinCount; ++i )
	{
        String aName = pImpl->mpDefPrinter->GetPaperBinName(i);

		if ( !aName.Len() )
		{
			aName = aPaperBin;
			aName.Append( sal_Unicode(' ') );
			aName.Append( UniString::CreateFromInt32( i+1 ) );
		}
		nEntryPos = aPaperTrayBox.InsertEntry( aName );
		aPaperTrayBox.SetEntryData( nEntryPos, (void*)(sal_uLong)i );
	}
	aPaperTrayBox.SelectEntry( aOldName );
	aPaperTrayBox.SetUpdateMode( sal_True );

    return 0;
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, PaperSizeSelect_Impl, ListBox *, pBox )
{
	const sal_uInt16 nPos = pBox->GetSelectEntryPos();
	Paper ePaper = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData( nPos );

	if ( ePaper != PAPER_USER )
	{
		Size aSize( SvxPaperInfo::GetPaperSize( ePaper, MAP_100TH_MM ) );

		if ( aLandscapeBtn.IsChecked() )
			Swap( aSize );

		if ( aSize.Height() < aPaperHeightEdit.GetMin( FUNIT_100TH_MM ) )
			aPaperHeightEdit.SetMin(
				aPaperHeightEdit.Normalize( aSize.Height() ), FUNIT_100TH_MM );
		if ( aSize.Width() < aPaperWidthEdit.GetMin( FUNIT_100TH_MM ) )
			aPaperWidthEdit.SetMin(
				aPaperWidthEdit.Normalize( aSize.Width() ), FUNIT_100TH_MM );
		SetMetricValue( aPaperHeightEdit, aSize.Height(), SFX_MAPUNIT_100TH_MM );
		SetMetricValue( aPaperWidthEdit, aSize.Width(), SFX_MAPUNIT_100TH_MM );

		// R"ander ggf. neu berechnen
		CalcMargin_Impl();

		RangeHdl_Impl( 0 );
		UpdateExample_Impl( true );

		if ( eMode == SVX_PAGE_MODE_PRESENTATION )
		{
			// Draw: bei Papierformat soll der Rand 1cm betragen
			long nTmp = 0;
			sal_Bool bScreen = ( PAPER_SCREEN == ePaper );

			if ( !bScreen )
				// bei Bildschirm keinen Rand
				nTmp = 1; // entspr. 1cm

			// Abfragen, ob fuer Raender 0 gesetzt ist:
			if ( bScreen || aRightMarginEdit.GetValue() == 0 )
			{
				SetMetricValue( aRightMarginEdit, nTmp, SFX_MAPUNIT_CM );
				if ( !bScreen &&
					 aRightMarginEdit.GetFirst() > aRightMarginEdit.GetValue() )
					aRightMarginEdit.SetValue( aRightMarginEdit.GetFirst() );
			}
			if ( bScreen || aLeftMarginEdit.GetValue() == 0 )
			{
				SetMetricValue( aLeftMarginEdit, nTmp, SFX_MAPUNIT_CM );
				if ( !bScreen &&
					 aLeftMarginEdit.GetFirst() > aLeftMarginEdit.GetValue() )
					aLeftMarginEdit.SetValue( aLeftMarginEdit.GetFirst() );
			}
			if ( bScreen || aBottomMarginEdit.GetValue() == 0 )
			{
				SetMetricValue( aBottomMarginEdit, nTmp, SFX_MAPUNIT_CM );
				if ( !bScreen &&
					 aBottomMarginEdit.GetFirst() > aBottomMarginEdit.GetValue() )
					aBottomMarginEdit.SetValue( aBottomMarginEdit.GetFirst() );
			}
			if ( bScreen || aTopMarginEdit.GetValue() == 0 )
			{
				SetMetricValue( aTopMarginEdit, nTmp, SFX_MAPUNIT_CM );
				if ( !bScreen &&
					 aTopMarginEdit.GetFirst() > aTopMarginEdit.GetValue() )
					aTopMarginEdit.SetValue( aTopMarginEdit.GetFirst() );
			}
			UpdateExample_Impl( true );
		}
	}
	return 0;
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, PaperSizeModify_Impl, Edit *, EMPTYARG )
{
	sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE );
	SfxMapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich );
	Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ),
				GetCoreValue( aPaperHeightEdit, eUnit ) );
	Paper ePaper = SvxPaperInfo::GetSvxPaper( aSize, (MapUnit)eUnit, sal_True );
	sal_uInt16 nEntryCount = aPaperSizeBox.GetEntryCount();

	for ( sal_uInt16 i = 0; i < nEntryCount; ++i )
	{
		Paper eTmp = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData(i);

		if ( eTmp == ePaper )
		{
			aPaperSizeBox.SelectEntryPos(i);
			break;
		}
	}
	UpdateExample_Impl( true );
	return 0;
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, SwapOrientation_Impl, RadioButton *, pBtn )
{
	if (
        (!bLandscape && pBtn == &aLandscapeBtn) ||
		(bLandscape  && pBtn == &aPortraitBtn)
       )
	{
		bLandscape = aLandscapeBtn.IsChecked();

		const long lWidth = GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_100TH_MM );
		const long lHeight = GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_100TH_MM );

        // swap with and height
		SetMetricValue( aPaperWidthEdit, lHeight, SFX_MAPUNIT_100TH_MM );
		SetMetricValue( aPaperHeightEdit, lWidth, SFX_MAPUNIT_100TH_MM );

        // recalculate margins if necessary
		CalcMargin_Impl();

		PaperSizeSelect_Impl( &aPaperSizeBox );
		RangeHdl_Impl( 0 );
		SwapFirstValues_Impl( bBorderModified );
        UpdateExample_Impl( true );
	}
	return 0;
}

// -----------------------------------------------------------------------

void SvxPageDescPage::SwapFirstValues_Impl( FASTBOOL bSet )
{
    MapMode aOldMode = pImpl->mpDefPrinter->GetMapMode();
	Orientation	eOri = ORIENTATION_PORTRAIT;

	if ( bLandscape )
		eOri = ORIENTATION_LANDSCAPE;
    Orientation eOldOri = pImpl->mpDefPrinter->GetOrientation();
    pImpl->mpDefPrinter->SetOrientation( eOri );
    pImpl->mpDefPrinter->SetMapMode( MAP_TWIP );

	// First- und Last-Werte f"ur die R"ander setzen
    Size aPaperSize = pImpl->mpDefPrinter->GetPaperSize();
    Size aPrintSize = pImpl->mpDefPrinter->GetOutputSize();
	/*
	 * einen Punkt ( 0,0 ) in logische Koordinaten zu konvertieren,
	 * sieht aus wie Unsinn; ist aber sinnvoll, wenn der Ursprung des
	 * Koordinatensystems verschoben ist.
	 */
    Point aPrintOffset = pImpl->mpDefPrinter->GetPageOffset() -
                         pImpl->mpDefPrinter->PixelToLogic( Point() );
    pImpl->mpDefPrinter->SetMapMode( aOldMode );
    pImpl->mpDefPrinter->SetOrientation( eOldOri );

    sal_Int64 nSetL = aLeftMarginEdit.Denormalize(
					aLeftMarginEdit.GetValue( FUNIT_TWIP ) );
	sal_Int64 nSetR = aRightMarginEdit.Denormalize(
					aRightMarginEdit.GetValue( FUNIT_TWIP ) );
	sal_Int64 nSetT = aTopMarginEdit.Denormalize(
					aTopMarginEdit.GetValue( FUNIT_TWIP ) );
	sal_Int64 nSetB = aBottomMarginEdit.Denormalize(
					aBottomMarginEdit.GetValue( FUNIT_TWIP ) );

	long nOffset = !aPrintOffset.X() && !aPrintOffset.Y() ? 0 : PRINT_OFFSET;
	long nNewL = aPrintOffset.X();
	long nNewR =
		aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X() + nOffset;
	long nNewT = aPrintOffset.Y();
	long nNewB =
		aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y() + nOffset;

	aLeftMarginEdit.SetFirst( aLeftMarginEdit.Normalize( nNewL ), FUNIT_TWIP );
	nFirstLeftMargin = static_cast<long>(aLeftMarginEdit.GetFirst());
	aRightMarginEdit.SetFirst( aRightMarginEdit.Normalize( nNewR ), FUNIT_TWIP );
	nFirstRightMargin = static_cast<long>(aRightMarginEdit.GetFirst());
	aTopMarginEdit.SetFirst( aTopMarginEdit.Normalize( nNewT ), FUNIT_TWIP );
	nFirstTopMargin = static_cast<long>(aTopMarginEdit.GetFirst());
	aBottomMarginEdit.SetFirst(	aBottomMarginEdit.Normalize( nNewB ), FUNIT_TWIP );
	nFirstBottomMargin = static_cast<long>(aBottomMarginEdit.GetFirst());

	if ( bSet )
	{
		// ggf. auch die Werte umsetzen,
		if ( nSetL < nNewL )
			aLeftMarginEdit.SetValue( aLeftMarginEdit.Normalize( nNewL ),
									  FUNIT_TWIP );
		if ( nSetR < nNewR )
			aRightMarginEdit.SetValue( aRightMarginEdit.Normalize( nNewR ),
									   FUNIT_TWIP );
		if ( nSetT < nNewT )
			aTopMarginEdit.SetValue( aTopMarginEdit.Normalize( nNewT ),
									 FUNIT_TWIP );
		if ( nSetB < nNewB )
			aBottomMarginEdit.SetValue( aBottomMarginEdit.Normalize( nNewB ),
										FUNIT_TWIP );
	}
}

// -----------------------------------------------------------------------

IMPL_LINK_INLINE_START( SvxPageDescPage, BorderModify_Impl, MetricField *, EMPTYARG )
{
	if ( !bBorderModified )
		bBorderModified = sal_True;
	UpdateExample_Impl();
	return 0;
}
IMPL_LINK_INLINE_END( SvxPageDescPage, BorderModify_Impl, MetricField *, EMPTYARG )

// -----------------------------------------------------------------------

void SvxPageDescPage::UpdateExample_Impl( bool bResetbackground )
{
	// Size
	Size aSize(	GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP ),
				GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP ) );

	aBspWin.SetSize( aSize );

	// R"ander
	aBspWin.SetTop( GetCoreValue( aTopMarginEdit, SFX_MAPUNIT_TWIP ) );
	aBspWin.SetBottom( GetCoreValue( aBottomMarginEdit, SFX_MAPUNIT_TWIP ) );
	aBspWin.SetLeft( GetCoreValue( aLeftMarginEdit, SFX_MAPUNIT_TWIP ) );
	aBspWin.SetRight( GetCoreValue( aRightMarginEdit, SFX_MAPUNIT_TWIP ) );

	// Layout
	aBspWin.SetUsage( PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ) );
    if ( bResetbackground )
        aBspWin.ResetBackground();
	aBspWin.Invalidate();
}

// -----------------------------------------------------------------------

void SvxPageDescPage::ResetBackground_Impl( const SfxItemSet& rSet )
{
	sal_uInt16 nWhich = GetWhich( SID_ATTR_PAGE_HEADERSET );

	if ( rSet.GetItemState( nWhich, sal_False ) == SFX_ITEM_SET )
	{
		const SvxSetItem& rSetItem =
			(const SvxSetItem&)rSet.Get( nWhich, sal_False );
		const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
		const SfxBoolItem& rOn =
			(const SfxBoolItem&)rTmpSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );

		if ( rOn.GetValue() )
		{
			nWhich = GetWhich( SID_ATTR_BRUSH );

			if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
			{
				const SvxBrushItem& rItem =
					(const SvxBrushItem&)rTmpSet.Get( nWhich );
				aBspWin.SetHdColor( rItem.GetColor() );
			}
			nWhich = GetWhich( SID_ATTR_BORDER_OUTER );

			if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
			{
				const SvxBoxItem& rItem =
					(const SvxBoxItem&)rTmpSet.Get( nWhich );
				aBspWin.SetHdBorder( rItem );
			}
		}
	}

	nWhich = GetWhich( SID_ATTR_PAGE_FOOTERSET );

	if ( rSet.GetItemState( nWhich, sal_False ) == SFX_ITEM_SET )
	{
		const SvxSetItem& rSetItem =
			(const SvxSetItem&)rSet.Get( nWhich, sal_False );
		const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
		const SfxBoolItem& rOn =
			(const SfxBoolItem&)rTmpSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );

		if ( rOn.GetValue() )
		{
			nWhich = GetWhich( SID_ATTR_BRUSH );

			if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
			{
				const SvxBrushItem& rItem =
					(const SvxBrushItem&)rTmpSet.Get( nWhich );
				aBspWin.SetFtColor( rItem.GetColor() );
			}
			nWhich = GetWhich( SID_ATTR_BORDER_OUTER );

			if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET )
			{
				const SvxBoxItem& rItem =
					(const SvxBoxItem&)rTmpSet.Get( nWhich );
				aBspWin.SetFtBorder( rItem );
			}
		}
	}

	const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_BRUSH );

	if ( pItem )
	{
		aBspWin.SetColor( ( (const SvxBrushItem*)pItem )->GetColor() );
		const Graphic* pGrf = ( (const SvxBrushItem*)pItem )->GetGraphic();

		if ( pGrf )
		{
			Bitmap aBitmap = pGrf->GetBitmap();
			aBspWin.SetBitmap( &aBitmap );
		}
		else
			aBspWin.SetBitmap( NULL );
	}

	pItem = GetItem( rSet, SID_ATTR_BORDER_OUTER );

	if ( pItem )
		aBspWin.SetBorder( (SvxBoxItem&)*pItem );
}

// -----------------------------------------------------------------------

void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet )
{
	bLandscape = aLandscapeBtn.IsChecked();
	const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE );

	if ( pItem )
		aBspWin.SetSize( ( (const SvxSizeItem*)pItem )->GetSize() );

	const SvxSetItem* pSetItem = 0;

	// Kopfzeilen-Attribute auswerten

	if ( SFX_ITEM_SET ==
		 rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ),
							sal_False, (const SfxPoolItem**)&pSetItem ) )
	{
		const SfxItemSet& rHeaderSet = pSetItem->GetItemSet();
		const SfxBoolItem& rHeaderOn =
			(const SfxBoolItem&)rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );

		if ( rHeaderOn.GetValue() )
		{
			const SvxSizeItem& rSize = (const SvxSizeItem&)
				rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) );
			const SvxULSpaceItem& rUL = (const SvxULSpaceItem&)
				rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) );
			long nDist = rUL.GetLower();
			aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist );
			aBspWin.SetHdDist( nDist );
			const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)
				rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) );
			aBspWin.SetHdLeft( rLR.GetLeft() );
			aBspWin.SetHdRight( rLR.GetRight() );
			aBspWin.SetHeader( sal_True );
		}
		else
			aBspWin.SetHeader( sal_False );

		// im Beispiel Hintergrund und Umrandung anzeigen
		sal_uInt16 nWhich = GetWhich( SID_ATTR_BRUSH );

		if ( rHeaderSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
		{
			const SvxBrushItem& rItem =
				(const SvxBrushItem&)rHeaderSet.Get( nWhich );
			aBspWin.SetHdColor( rItem.GetColor() );
		}
		nWhich = GetWhich( SID_ATTR_BORDER_OUTER );

		if ( rHeaderSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
		{
			const SvxBoxItem& rItem =
				(const SvxBoxItem&)rHeaderSet.Get( nWhich );
			aBspWin.SetHdBorder( rItem );
		}
	}

	// Fusszeilen-Attribute auswerten

	if ( SFX_ITEM_SET ==
		 rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ),
							sal_False, (const SfxPoolItem**)&pSetItem ) )
	{
		const SfxItemSet& rFooterSet = pSetItem->GetItemSet();
		const SfxBoolItem& rFooterOn =
			(const SfxBoolItem&)rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );

		if ( rFooterOn.GetValue() )
		{
			const SvxSizeItem& rSize = (const SvxSizeItem&)
				rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) );
			const SvxULSpaceItem& rUL = (const SvxULSpaceItem&)
				rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) );
			long nDist = rUL.GetUpper();
			aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist );
			aBspWin.SetFtDist( nDist );
			const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)
				rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) );
			aBspWin.SetFtLeft( rLR.GetLeft() );
			aBspWin.SetFtRight( rLR.GetRight() );
			aBspWin.SetFooter( sal_True );
		}
		else
			aBspWin.SetFooter( sal_False );

		// im Beispiel Hintergrund und Umrandung anzeigen
		sal_uInt16 nWhich = GetWhich( SID_ATTR_BRUSH );

		if ( rFooterSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
		{
			const SvxBrushItem& rItem =
				(const SvxBrushItem&)rFooterSet.Get( nWhich );
			aBspWin.SetFtColor( rItem.GetColor() );
		}
		nWhich = GetWhich( SID_ATTR_BORDER_OUTER );

		if ( rFooterSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE )
		{
			const SvxBoxItem& rItem =
				(const SvxBoxItem&)rFooterSet.Get( nWhich );
			aBspWin.SetFtBorder( rItem );
		}
	}
}

// -----------------------------------------------------------------------

void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet )
{
	InitHeadFoot_Impl( rSet );
	ResetBackground_Impl( rSet );
	RangeHdl_Impl( 0 );
}

// -----------------------------------------------------------------------

int SvxPageDescPage::DeactivatePage( SfxItemSet* _pSet )
{
	// Abfrage, ob die Seitenr"ander ausserhalb des Druckbereichs liegen
	// Wenn nicht, dann den Anwender fragen, ob sie "ubernommen werden sollen.
	// Wenn nicht, dann auf der TabPage bleiben.
	sal_uInt16 nPos = aPaperSizeBox.GetSelectEntryPos();
	Paper ePaper = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData( nPos );

	if ( ePaper != PAPER_SCREEN && IsMarginOutOfRange() )
	{
		if ( QueryBox( this, WB_YES_NO | WB_DEF_NO, aPrintRangeQueryText ).Execute() == RET_NO )
		{
			MetricField* pField = NULL;
			if ( IsPrinterRangeOverflow( aLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) )
				pField = &aLeftMarginEdit;
			if (	IsPrinterRangeOverflow( aRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT )
				 && !pField )
				pField = &aRightMarginEdit;
			if (	IsPrinterRangeOverflow( aTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP )
				 && !pField )
				pField = &aTopMarginEdit;
			if (	IsPrinterRangeOverflow( aBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM )
				 && !pField )
				pField = &aBottomMarginEdit;
			if ( pField )
				pField->GrabFocus();
			UpdateExample_Impl();
			return KEEP_PAGE;
		}
		else
			CheckMarginEdits( false );
	}

    if ( _pSet )
	{
        FillItemSet( *_pSet );

		// ggf. hoch/quer putten
		sal_uInt16 nWh = GetWhich( SID_ATTR_PAGE_SIZE );
		SfxMapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh );
		Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ),
					GetCoreValue( aPaperHeightEdit, eUnit ) );

        // putten, wenn aktuelle Gr"o/se unterschiedlich zum Wert in _pSet
        const SvxSizeItem* pSize = (const SvxSizeItem*)GetItem( *_pSet, SID_ATTR_PAGE_SIZE );
		if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) )
            _pSet->Put( SvxSizeItem( nWh, aSize ) );
	}

	return LEAVE_PAGE;
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, RangeHdl_Impl, Edit *, EMPTYARG )
{
	// Aktuelle Header-Breite/H"ohe aus dem Bsp
	long nHHeight = aBspWin.GetHdHeight();
	long nHDist = aBspWin.GetHdDist();

	// Aktuelle Footer-Breite/H"ohe aus dem Bsp
	long nFHeight = aBspWin.GetFtHeight();
	long nFDist = aBspWin.GetFtDist();

	// Aktuelle Header/Footer-R"ander aus dem Bsp
	long nHFLeft = Max( aBspWin.GetHdLeft(), aBspWin.GetFtLeft() );
	long nHFRight = Max( aBspWin.GetHdRight(), aBspWin.GetFtRight() );

	// Aktuelle Werte der Seitenr"ander
	long nBT = static_cast<long>(aTopMarginEdit.Denormalize(aTopMarginEdit.GetValue(FUNIT_TWIP)));
	long nBB = static_cast<long>(aBottomMarginEdit.Denormalize(aBottomMarginEdit.GetValue(FUNIT_TWIP)));
	long nBL = static_cast<long>(aLeftMarginEdit.Denormalize(aLeftMarginEdit.GetValue(FUNIT_TWIP)));
	long nBR = static_cast<long>(aRightMarginEdit.Denormalize(aRightMarginEdit.GetValue(FUNIT_TWIP)));

	// Breite Umrandung der Seite berechnen
    const SfxItemSet* _pSet = &GetItemSet();
	Size aBorder;

    if ( _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >=
			SFX_ITEM_AVAILABLE &&
         _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER)  ) >=
			SFX_ITEM_AVAILABLE )
	{
		aBorder = ( GetMinBorderSpace_Impl(
            (const SvxShadowItem&)_pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW)),
            (const SvxBoxItem&)_pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER))));
	}

	long nH  = static_cast<long>(aPaperHeightEdit.Denormalize(aPaperHeightEdit.GetValue(FUNIT_TWIP)));
	long nW  = static_cast<long>(aPaperWidthEdit.Denormalize(aPaperWidthEdit.GetValue(FUNIT_TWIP)));

	// Grenzen Papier
	// Maximum liegt bei 54cm
	//
	long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB +
				MINBODY + aBorder.Height();
	aPaperHeightEdit.SetMin(aPaperHeightEdit.Normalize(nMin), FUNIT_TWIP);

	nMin = MINBODY + nBL + nBR + aBorder.Width();
	aPaperWidthEdit.SetMin(aPaperWidthEdit.Normalize(nMin), FUNIT_TWIP);

	// Falls sich die Papiergr"o\se ge"adert hat
	nH = static_cast<long>(aPaperHeightEdit.Denormalize(aPaperHeightEdit.GetValue(FUNIT_TWIP)));
	nW = static_cast<long>(aPaperWidthEdit.Denormalize(aPaperWidthEdit.GetValue(FUNIT_TWIP)));

	// Top
	long nMax =	nH - nBB - aBorder.Height() - MINBODY -
				nFDist - nFHeight -	nHDist - nHHeight;

	aTopMarginEdit.SetMax(aTopMarginEdit.Normalize(nMax), FUNIT_TWIP);

	// Bottom
	nMax = nH - nBT - aBorder.Height() - MINBODY -
		   nFDist - nFHeight - nHDist - nHHeight;

	aBottomMarginEdit.SetMax(aTopMarginEdit.Normalize(nMax), FUNIT_TWIP);

	// Left
	nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
	aLeftMarginEdit.SetMax(aLeftMarginEdit.Normalize(nMax), FUNIT_TWIP);

	// Right
	nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
	aRightMarginEdit.SetMax(aRightMarginEdit.Normalize(nMax), FUNIT_TWIP);
	return 0;
}

// -----------------------------------------------------------------------

void SvxPageDescPage::CalcMargin_Impl()
{
	// Aktuelle Werte der Seitenr"ander
	long nBT = GetCoreValue( aTopMarginEdit, SFX_MAPUNIT_TWIP );
	long nBB = GetCoreValue( aBottomMarginEdit, SFX_MAPUNIT_TWIP );

	long nBL = GetCoreValue( aLeftMarginEdit, SFX_MAPUNIT_TWIP );
	long nBR = GetCoreValue( aRightMarginEdit, SFX_MAPUNIT_TWIP );

	long nH  = GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP );
	long nW  = GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP );

	long nWidth = nBL + nBR + MINBODY;
	long nHeight = nBT + nBB + MINBODY;

	if ( nWidth > nW || nHeight > nH )
	{
		if ( nWidth > nW )
		{
			long nTmp = nBL <= nBR ? nBR : nBL;
			nTmp -= nWidth - nW;

			if ( nBL <= nBR )
				SetMetricValue( aRightMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
			else
				SetMetricValue( aLeftMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
		}

		if ( nHeight > nH )
		{
			long nTmp = nBT <= nBB ? nBB : nBT;
			nTmp -= nHeight - nH;

			if ( nBT <= nBB )
				SetMetricValue( aBottomMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
			else
				SetMetricValue( aTopMarginEdit, nTmp, SFX_MAPUNIT_TWIP );
		}
	}
}

// -----------------------------------------------------------------------

IMPL_LINK_INLINE_START( SvxPageDescPage, CenterHdl_Impl, CheckBox *, EMPTYARG )
{
    aBspWin.SetHorz( aHorzBox.IsChecked() );
    aBspWin.SetVert( aVertBox.IsChecked() );
    UpdateExample_Impl();
	return 0;
}
IMPL_LINK_INLINE_END( SvxPageDescPage, CenterHdl_Impl, CheckBox *, EMPTYARG )

// -----------------------------------------------------------------------

void SvxPageDescPage::SetCollectionList(const List* pList)
{
	sStandardRegister = *(String*)pList->GetObject(0);
	for( sal_uInt16 i = 1; i < pList->Count(); i++   )
	{
		aRegisterLB.InsertEntry(*(String*)pList->GetObject(i));
	}

	aRegisterCB  .Show();
	aRegisterFT  .Show();
	aRegisterLB.Show();
	aRegisterCB.SetClickHdl(LINK(this, SvxPageDescPage, RegisterModify));
}

// -----------------------------------------------------------------------

IMPL_LINK( SvxPageDescPage, RegisterModify, CheckBox*, pBox )
{
	sal_Bool bEnable = sal_False;
	if(pBox->IsChecked())
	{
		bEnable = sal_True;
		if(USHRT_MAX == aRegisterLB.GetSelectEntryPos())
			aRegisterLB.SelectEntry(sStandardRegister);
	}
	aRegisterFT.Enable( bEnable );
	aRegisterLB.Enable( bEnable );
	return 0;
}

// ----------------------------------------------------------------------------

void SvxPageDescPage::DisableVerticalPageDir()
{
    aTextFlowBox.RemoveEntryValue( FRMDIR_VERT_TOP_RIGHT );
    aTextFlowBox.RemoveEntryValue( FRMDIR_VERT_TOP_LEFT );
    if( aTextFlowBox.GetEntryCount() < 2 )
    {
        aTextFlowLbl.Hide();
        aTextFlowBox.Hide();
        aBspWin.EnableFrameDirection( sal_False );
    }
}

IMPL_LINK( SvxPageDescPage, FrameDirectionModify_Impl, ListBox*,  EMPTYARG)
{
    aBspWin.SetFrameDirection( (sal_uInt32) aTextFlowBox.GetSelectEntryValue() );
    aBspWin.Invalidate();
    return 0;
}

bool SvxPageDescPage::IsPrinterRangeOverflow(
	MetricField& rField, long nFirstMargin, long nLastMargin, MarginPosition nPos )
{
	bool bRet = false;
	bool bCheck = ( ( pImpl->m_nPos & nPos ) == 0 );
	long nValue = static_cast<long>(rField.GetValue());
	if ( bCheck &&
		 (  nValue < nFirstMargin || nValue > nLastMargin ) &&
		 rField.GetText() != rField.GetSavedValue() )
	{
		rField.SetValue( nValue < nFirstMargin ? nFirstMargin : nLastMargin );
 		bRet = true;
	}

	return bRet;
}

/** Check if a value of a margin edit is outside the printer paper margins
	and save this information.
*/
void SvxPageDescPage::CheckMarginEdits( bool _bClear )
{
	if ( _bClear )
		pImpl->m_nPos = 0;

	sal_Int64 nValue = aLeftMarginEdit.GetValue();
	if (  nValue < nFirstLeftMargin || nValue > nLastLeftMargin )
		pImpl->m_nPos |= MARGIN_LEFT;
	nValue = aRightMarginEdit.GetValue();
	if (  nValue < nFirstRightMargin || nValue > nLastRightMargin )
		pImpl->m_nPos |= MARGIN_RIGHT;
	nValue = aTopMarginEdit.GetValue();
	if (  nValue < nFirstTopMargin || nValue > nLastTopMargin )
		pImpl->m_nPos |= MARGIN_TOP;
	nValue = aBottomMarginEdit.GetValue();
	if (  nValue < nFirstBottomMargin || nValue > nLastBottomMargin )
		pImpl->m_nPos |= MARGIN_BOTTOM;
}

bool SvxPageDescPage::IsMarginOutOfRange()
{
	bool bRet = ( ( ( !( pImpl->m_nPos & MARGIN_LEFT ) &&
					  ( aLeftMarginEdit.GetText() != aLeftMarginEdit.GetSavedValue() ) ) &&
					( aLeftMarginEdit.GetValue() < nFirstLeftMargin ||
					  aLeftMarginEdit.GetValue() > nLastLeftMargin ) ) ||
				  ( ( !( pImpl->m_nPos & MARGIN_RIGHT ) &&
					  ( aRightMarginEdit.GetText() != aRightMarginEdit.GetSavedValue() ) ) &&
					( aRightMarginEdit.GetValue() < nFirstRightMargin ||
					  aRightMarginEdit.GetValue() > nLastRightMargin ) ) ||
				  ( ( !( pImpl->m_nPos & MARGIN_TOP ) &&
					  ( aTopMarginEdit.GetText() != aTopMarginEdit.GetSavedValue() ) ) &&
					( aTopMarginEdit.GetValue() < nFirstTopMargin ||
					  aTopMarginEdit.GetValue() > nLastTopMargin ) ) ||
				  ( ( !( pImpl->m_nPos & MARGIN_BOTTOM ) &&
					  ( aBottomMarginEdit.GetText() != aBottomMarginEdit.GetSavedValue() ) ) &&
					( aBottomMarginEdit.GetValue() < nFirstBottomMargin ||
					  aBottomMarginEdit.GetValue() > nLastBottomMargin ) ) );
	return bRet;
}

void SvxPageDescPage::PageCreated (SfxAllItemSet aSet) //add CHINA001
{
	SFX_ITEMSET_ARG (&aSet,pModeItem,SfxAllEnumItem,SID_ENUM_PAGE_MODE,sal_False);
	SFX_ITEMSET_ARG (&aSet,pPaperStartItem,SfxAllEnumItem,SID_PAPER_START,sal_False);
	SFX_ITEMSET_ARG (&aSet,pPaperEndItem,SfxAllEnumItem,SID_PAPER_END,sal_False);
	SFX_ITEMSET_ARG (&aSet,pCollectListItem,SfxStringListItem,SID_COLLECT_LIST,sal_False);
	if (pModeItem)
		SetMode((SvxModeType)pModeItem->GetEnumValue());
	if (pPaperStartItem && pPaperEndItem)
		SetPaperFormatRanges( (Paper)pPaperStartItem->GetEnumValue(), (Paper)pPaperEndItem->GetEnumValue() );
	if (pCollectListItem)
		SetCollectionList(pCollectListItem->GetList());
}