AOO410/main/cui/source/tabpages/connect.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_cui.hxx"

// include ---------------------------------------------------------------
#include <sfx2/app.hxx>
#include <sfx2/module.hxx>
#include <tools/shl.hxx>
#include "svx/ofaitem.hxx"	// add CHINA001 
#include <sfx2/request.hxx> // add CHINA001 
#include <svx/dialogs.hrc>

#define _SVX_CONNECT_CXX

#include <svx/svdoedge.hxx>
#include <svx/svdattr.hxx>
#include <svx/svdattrx.hxx>
#include <svx/svdview.hxx>

#include "svx/connctrl.hxx"
#include "connect.hxx"
#include "connect.hrc"
#include <dialmgr.hxx>
#include "svx/dlgutil.hxx"

#include "paragrph.hrc"
#include <cuires.hrc>

static sal_uInt16 pRanges[] =
{
	SDRATTR_EDGE_FIRST,
	SDRATTR_EDGE_LAST,
	0
};

/*************************************************************************
|*
|* Dialog zum Aendern von Konnektoren (Connectors)
|*
\************************************************************************/

SvxConnectionDialog::SvxConnectionDialog( Window* pParent, const SfxItemSet& rInAttrs,
								const SdrView* pSdrView ) :
		SfxSingleTabDialog( pParent, rInAttrs, RID_SVXPAGE_CONNECTION )
{
    SvxConnectionPage* _pPage = new SvxConnectionPage( this, rInAttrs );

    _pPage->SetView( pSdrView );
    _pPage->Construct();

    SetTabPage( _pPage );
    SetText( _pPage->GetText() );
}

/*************************************************************************
|*
|* Dtor
|*
\************************************************************************/

SvxConnectionDialog::~SvxConnectionDialog()
{
}

/*************************************************************************
|*
|* Seite zum Aendern von Konnektoren (Connectors)
|*
\************************************************************************/

SvxConnectionPage::SvxConnectionPage( Window* pWindow, const SfxItemSet& rInAttrs ) :
				SfxTabPage		( pWindow, CUI_RES( RID_SVXPAGE_CONNECTION ),
								  rInAttrs ),

		aFtType      			( this, CUI_RES( FT_TYPE ) ),
		aLbType					( this, CUI_RES( LB_TYPE ) ),

        aFlDelta                ( this, CUI_RES( FL_DELTA ) ),
        aFtLine1                ( this, CUI_RES( FT_LINE_1 ) ),
        aMtrFldLine1            ( this, CUI_RES( MTR_FLD_LINE_1 ) ),
        aFtLine2                ( this, CUI_RES( FT_LINE_2 ) ),
        aMtrFldLine2            ( this, CUI_RES( MTR_FLD_LINE_2 ) ),
        aFtLine3                ( this, CUI_RES( FT_LINE_3 ) ),
        aMtrFldLine3            ( this, CUI_RES( MTR_FLD_LINE_3 ) ),

        aFlDistance             ( this, CUI_RES( FL_DISTANCE ) ),
		aFtHorz1    			( this, CUI_RES( FT_HORZ_1 ) ),
		aMtrFldHorz1    		( this, CUI_RES( MTR_FLD_HORZ_1 ) ),
        aFtVert1                ( this, CUI_RES( FT_VERT_1 ) ),
        aMtrFldVert1            ( this, CUI_RES( MTR_FLD_VERT_1 ) ),
        aFtHorz2                ( this, CUI_RES( FT_HORZ_2 ) ),
        aMtrFldHorz2            ( this, CUI_RES( MTR_FLD_HORZ_2 ) ),
        aFtVert2                ( this, CUI_RES( FT_VERT_2 ) ),
		aMtrFldVert2    		( this, CUI_RES( MTR_FLD_VERT_2 ) ),

        aCtlPreview             ( this, CUI_RES( CTL_PREVIEW ), rInAttrs ),
        rOutAttrs               ( rInAttrs ),
        aAttrSet                ( *rInAttrs.GetPool() )
{
	FreeResource();
	
	aCtlPreview.SetAccessibleName(String(CUI_RES(STR_EXAMPLE)));

	SfxItemPool* pPool = rOutAttrs.GetPool();
	DBG_ASSERT( pPool, "Wo ist der Pool" );
	eUnit = pPool->GetMetric( SDRATTR_EDGENODE1HORZDIST );

	FillTypeLB();

	const FieldUnit eFUnit = GetModuleFieldUnit( rInAttrs );
	SetFieldUnit( aMtrFldHorz1, eFUnit );
	SetFieldUnit( aMtrFldHorz2, eFUnit );
	SetFieldUnit( aMtrFldVert1, eFUnit );
	SetFieldUnit( aMtrFldVert2, eFUnit );
	SetFieldUnit( aMtrFldLine1, eFUnit );
	SetFieldUnit( aMtrFldLine2, eFUnit );
	SetFieldUnit( aMtrFldLine3, eFUnit );
	if( eFUnit == FUNIT_MM )
	{
		aMtrFldHorz1.SetSpinSize( 50 );
		aMtrFldHorz2.SetSpinSize( 50 );
		aMtrFldVert1.SetSpinSize( 50 );
		aMtrFldVert2.SetSpinSize( 50 );
		aMtrFldLine1.SetSpinSize( 50 );
		aMtrFldLine2.SetSpinSize( 50 );
		aMtrFldLine3.SetSpinSize( 50 );
	}

	// disable 3D border
	aCtlPreview.SetBorderStyle(WINDOW_BORDER_MONO);

	Link aLink( LINK( this, SvxConnectionPage, ChangeAttrHdl_Impl ) );
	aMtrFldHorz1.SetModifyHdl( aLink );
	aMtrFldVert1.SetModifyHdl( aLink );
	aMtrFldHorz2.SetModifyHdl( aLink );
	aMtrFldVert2.SetModifyHdl( aLink );
	aMtrFldLine1.SetModifyHdl( aLink );
	aMtrFldLine2.SetModifyHdl( aLink );
	aMtrFldLine3.SetModifyHdl( aLink );
	aLbType.SetSelectHdl( aLink );
}

/*************************************************************************
|*
|* Dtor
|*
\************************************************************************/

SvxConnectionPage::~SvxConnectionPage()
{
}

/*************************************************************************
|*
|* Liest uebergebenen Item-Set
|*
\************************************************************************/

void __EXPORT SvxConnectionPage::Reset( const SfxItemSet& rAttrs )
{
	const SfxPoolItem* pItem = GetItem( rAttrs, SDRATTR_EDGENODE1HORZDIST );
	const SfxItemPool* pPool = rAttrs.GetPool();

	// SdrEdgeNode1HorzDistItem
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE1HORZDIST );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeNode1HorzDistItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldHorz1, nValue, eUnit );
	}
	else
		aMtrFldHorz1.SetEmptyFieldValue();

	aMtrFldHorz1.SaveValue();

	// SdrEdgeNode2HorzDistItem
	pItem = GetItem( rAttrs, SDRATTR_EDGENODE2HORZDIST );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE2HORZDIST );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeNode2HorzDistItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldHorz2, nValue, eUnit );
	}
	else
		aMtrFldHorz2.SetEmptyFieldValue();

	aMtrFldHorz2.SaveValue();

	// SdrEdgeNode1VertDistItem
	pItem = GetItem( rAttrs, SDRATTR_EDGENODE1VERTDIST );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE1VERTDIST );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeNode1VertDistItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldVert1, nValue, eUnit );
	}
	else
		aMtrFldVert1.SetEmptyFieldValue();

	aMtrFldVert1.SaveValue();

	// SdrEdgeNode2VertDistItem
	pItem = GetItem( rAttrs, SDRATTR_EDGENODE2VERTDIST );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE2VERTDIST );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeNode2VertDistItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldVert2, nValue, eUnit );
	}
	else
		aMtrFldVert2.SetEmptyFieldValue();

	aMtrFldVert2.SaveValue();

	// SdrEdgeLine1DeltaItem
	pItem = GetItem( rAttrs, SDRATTR_EDGELINE1DELTA );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINE1DELTA );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeLine1DeltaItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldLine1, nValue, eUnit );
	}
	else
		aMtrFldLine1.SetEmptyFieldValue();

	aMtrFldLine1.SaveValue();

	// SdrEdgeLine2DeltaItem
	pItem = GetItem( rAttrs, SDRATTR_EDGELINE2DELTA );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINE2DELTA );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeLine2DeltaItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldLine2, nValue, eUnit );
	}
	else
		aMtrFldLine2.SetEmptyFieldValue();

	aMtrFldLine2.SaveValue();

	// SdrEdgeLine3DeltaItem
	pItem = GetItem( rAttrs, SDRATTR_EDGELINE3DELTA );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINE3DELTA );
	if( pItem )
	{
		long nValue = ( ( const SdrEdgeLine3DeltaItem* )pItem )->GetValue();
		SetMetricValue( aMtrFldLine3, nValue, eUnit );
	}
	else
		aMtrFldLine3.SetEmptyFieldValue();

	aMtrFldLine3.SaveValue();

	// SdrEdgeLineDeltaAnzItem
	pItem = GetItem( rAttrs, SDRATTR_EDGELINEDELTAANZ );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINEDELTAANZ );
	if( pItem )
	{
		sal_uInt16 nValue = ( ( const SdrEdgeLineDeltaAnzItem* )pItem )->GetValue();
		if( nValue <= 2 )
		{
			aFtLine3.Enable( sal_False );
			aMtrFldLine3.Enable( sal_False );
			aMtrFldLine3.SetEmptyFieldValue();
		}
		if( nValue <= 1 )
		{
			aFtLine2.Enable( sal_False );
			aMtrFldLine2.Enable( sal_False );
			aMtrFldLine2.SetEmptyFieldValue();
		}
		if( nValue == 0 )
		{
			aFtLine1.Enable( sal_False );
			aMtrFldLine1.Enable( sal_False );
			aMtrFldLine1.SetEmptyFieldValue();
		}
	}

	// SdrEdgeKindItem
	pItem = GetItem( rAttrs, SDRATTR_EDGEKIND );
	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGEKIND );
	if( pItem )
	{
		SdrEdgeKind nValue = ( ( const SdrEdgeKindItem* )pItem )->GetValue();
		aLbType.SelectEntryPos( sal::static_int_cast< sal_uInt16 >(nValue) );
	}
	else
		aLbType.SetNoSelection();
	aLbType.SaveValue();
}

/*************************************************************************
|*
|* Fuellt uebergebenen Item-Set mit Dialogbox-Attributen
|*
\************************************************************************/

sal_Bool SvxConnectionPage::FillItemSet( SfxItemSet& rAttrs)
{
	sal_Bool	 bModified = sal_False;
	sal_Int32	 nValue;

	if( aMtrFldHorz1.GetText() != aMtrFldHorz1.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldHorz1, eUnit );
		rAttrs.Put( SdrEdgeNode1HorzDistItem( nValue ) );
		bModified = sal_True;
	}

	if( aMtrFldHorz2.GetText() != aMtrFldHorz2.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldHorz2, eUnit );
		rAttrs.Put( SdrEdgeNode2HorzDistItem( nValue ) );
		bModified = sal_True;
	}

	if( aMtrFldVert1.GetText() != aMtrFldVert1.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldVert1, eUnit );
		rAttrs.Put( SdrEdgeNode1VertDistItem( nValue ) );
		bModified = sal_True;
	}

	if( aMtrFldVert2.GetText() != aMtrFldVert2.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldVert2, eUnit );
		rAttrs.Put( SdrEdgeNode2VertDistItem( nValue ) );
		bModified = sal_True;
	}

	if( aMtrFldLine1.GetText() != aMtrFldLine1.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldLine1, eUnit );
		rAttrs.Put( SdrEdgeLine1DeltaItem( nValue ) );
		bModified = sal_True;
	}

	if( aMtrFldLine2.GetText() != aMtrFldLine2.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldLine2, eUnit );
		rAttrs.Put( SdrEdgeLine2DeltaItem( nValue ) );
		bModified = sal_True;
	}

	if( aMtrFldLine3.GetText() != aMtrFldLine3.GetSavedValue() )
	{
		nValue = GetCoreValue( aMtrFldLine3, eUnit );
		rAttrs.Put( SdrEdgeLine3DeltaItem( nValue ) );
		bModified = sal_True;
	}


	sal_uInt16 nPos = aLbType.GetSelectEntryPos();
	if( nPos != aLbType.GetSavedValue() )
	{
		if( nPos != LISTBOX_ENTRY_NOTFOUND )
		{
			rAttrs.Put( SdrEdgeKindItem( (SdrEdgeKind) nPos ) );
			bModified = sal_True;
		}
	}

	return( bModified );
}

/*************************************************************************
|*
|*
|*
\************************************************************************/

void SvxConnectionPage::Construct()
{
	DBG_ASSERT( pView, "Keine gueltige View Uebergeben!" );

	aCtlPreview.SetView( pView );
	aCtlPreview.Construct();
}

/*************************************************************************
|*
|* Erzeugt die Seite
|*
\************************************************************************/

SfxTabPage* SvxConnectionPage::Create( Window* pWindow,
				const SfxItemSet& rAttrs )
{
	return( new SvxConnectionPage( pWindow, rAttrs ) );
}

/*************************************************************************
|*
|*
|*
\************************************************************************/

sal_uInt16*	SvxConnectionPage::GetRanges()
{
	return( pRanges );
}

/*************************************************************************
|*
|*
|*
\************************************************************************/

IMPL_LINK( SvxConnectionPage, ChangeAttrHdl_Impl, void *, p )
{
	if( p == &aMtrFldHorz1 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldHorz1, eUnit );
		aAttrSet.Put( SdrEdgeNode1HorzDistItem( nValue ) );
	}

	if( p == &aMtrFldHorz2 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldHorz2, eUnit );
		aAttrSet.Put( SdrEdgeNode2HorzDistItem( nValue ) );
	}

	if( p == &aMtrFldVert1 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldVert1, eUnit );
		aAttrSet.Put( SdrEdgeNode1VertDistItem( nValue ) );
	}

	if( p == &aMtrFldVert2 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldVert2, eUnit );
		aAttrSet.Put( SdrEdgeNode2VertDistItem( nValue ) );
	}

	if( p == &aMtrFldLine1 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldLine1, eUnit );
		aAttrSet.Put( SdrEdgeLine1DeltaItem( nValue ) );
	}

	if( p == &aMtrFldLine2 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldLine2, eUnit );
		aAttrSet.Put( SdrEdgeLine2DeltaItem( nValue ) );
	}

	if( p == &aMtrFldLine3 )
	{
		sal_Int32 nValue = GetCoreValue( aMtrFldLine3, eUnit );
		aAttrSet.Put( SdrEdgeLine3DeltaItem( nValue ) );
	}


	if( p == &aLbType )
	{
		sal_uInt16 nPos = aLbType.GetSelectEntryPos();
		if( nPos != LISTBOX_ENTRY_NOTFOUND )
		{
			aAttrSet.Put( SdrEdgeKindItem( (SdrEdgeKind) nPos ) );
		}
	}

	aCtlPreview.SetAttributes( aAttrSet );

	if( p == &aLbType )
	{
		// Anzahl der Linienversaetze ermitteln
		sal_uInt16 nCount = aCtlPreview.GetLineDeltaAnz();

		aFtLine3.Enable( nCount > 2 );
		aMtrFldLine3.Enable( nCount > 2 );
		if( nCount > 2 )
			aMtrFldLine3.SetValue( aMtrFldLine3.GetValue() );
		else
			aMtrFldLine3.SetEmptyFieldValue();

		aFtLine2.Enable( nCount > 1 );
		aMtrFldLine2.Enable( nCount > 1 );
		if( nCount > 1 )
			aMtrFldLine2.SetValue( aMtrFldLine2.GetValue() );
		else
			aMtrFldLine2.SetEmptyFieldValue();

		aFtLine1.Enable( nCount > 0 );
		aMtrFldLine1.Enable( nCount > 0 );
		if( nCount > 0 )
			aMtrFldLine1.SetValue( aMtrFldLine1.GetValue() );
		else
			aMtrFldLine1.SetEmptyFieldValue();

	}

	return( 0L );
}

/*************************************************************************
|*
|*
|*
\************************************************************************/

void SvxConnectionPage::FillTypeLB()
{
	// ListBox mit Verbindernamen fuellen
	const SfxPoolItem* pItem = GetItem( rOutAttrs, SDRATTR_EDGEKIND );
	const SfxItemPool* pPool = rOutAttrs.GetPool();

	if( !pItem )
		pItem = &pPool->GetDefaultItem( SDRATTR_EDGEKIND );
	if( pItem )
	{
		const SdrEdgeKindItem* pEdgeKindItem = (const SdrEdgeKindItem*) pItem;
		sal_uInt16 nCount = pEdgeKindItem->GetValueCount();
		String aStr;

		for( sal_uInt16 i = 0; i < nCount; i++ )
		{
			aStr = pEdgeKindItem->GetValueTextByPos( i );
			aLbType.InsertEntry( aStr );
		}
	}
}
void SvxConnectionPage::PageCreated (SfxAllItemSet aSet) //add CHINA001 
{
	SFX_ITEMSET_ARG(&aSet,pOfaPtrItem,OfaPtrItem,SID_OBJECT_LIST,sal_False);
	if (pOfaPtrItem)
		SetView( static_cast<SdrView *>(pOfaPtrItem->GetValue()) );
	
	Construct();
}