Google Git
Sign in
apache / openoffice / bab44dcac0296df22024f3f10e7997de78ed4094 / . / AOO410 / main / configure.in
blob: 9398ec9b59efb7db55f3953ef655697c3d97d860 [file] [log] [blame]
dnl * *************************************************************
dnl *
dnl * Licensed to the Apache Software Foundation (ASF) under one
dnl * or more contributor license agreements. See the NOTICE file
dnl * distributed with this work for additional information
dnl * regarding copyright ownership. The ASF licenses this file
dnl * to you under the Apache License, Version 2.0 (the
dnl * "License"); you may not use this file except in compliance
dnl * with the License. You may obtain a copy of the License at
dnl *
dnl * http://www.apache.org/licenses/LICENSE-2.0
dnl *
dnl * Unless required by applicable law or agreed to in writing,
dnl * software distributed under the License is distributed on an
dnl * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
dnl * KIND, either express or implied. See the License for the
dnl * specific language governing permissions and limitations
dnl * under the License.
dnl *
dnl * *************************************************************
AC_REVISION( $Revision: 1.290 $ )
AC_PREREQ(2.50)
AC_INIT()
echo "$@" >config.parms
AC_ARG_WITH(dmake-path,
[ --with-dmake-path=<PATH TO EXECUTABLE> Specify the location of dmake ],
[ DMAKE_PATH="$withval"
])
AC_ARG_WITH(dmake-url,
[ --with-dmake-url=<URL> Specify the location of downloadable dmake source code. For example:
http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2
Note that dmake is under GPL license.],
[ DMAKE_URL="$withval"
])
AC_ARG_WITH(packager-list,
[ --with-packager-list=<PATH TO PACK LIST> Specify a file to drive the packaging process.
The file must follow the format explained in
instsetoo_native/util/pack.lst
],,)
AC_ARG_WITH(gnu-patch,
[ --with-gnu-patch Specify location of GNU patch on Solaris or FreeBSD
],,)
AC_ARG_WITH(gnu-cp,
[ --with-gnu-cp Specify location of GNU cp on Solaris
],,)
AC_ARG_WITH(gperf,
[ --with-gperf Specify location of gperf on Solaris or FreeBSD
],,)
AC_ARG_ENABLE(graphite,
[ --enable-graphite Enables the compilation of Graphite smart font rendering
],,)
AC_ARG_WITH(system-graphite,
[ --with-system-graphite use graphite library already installed on system
],,)
AC_ARG_WITH(system-apache-commons,
[ --with-system-apache-commons use apache-commons jar files already installed on system
],,)
AC_ARG_ENABLE(online-update,
[ --disable-online-update Disables the Online Update feature.
],,enable_online_update=yes)
AC_ARG_ENABLE(ldap,
[ --disable-ldap Disables the use of LDAP backend via OpenLDAP
],,)
AC_ARG_ENABLE(fetch-external,
[ --disable-fetch-external Disables fetching external tarballs from web sources.
],,)
AC_ARG_WITH(external-tar,
[ --with-external-tar=<TARFILE PATH> Specify path to tarfiles manually ],
[ TARFILE_LOCATION="$withval"
])
AC_ARG_WITH(openldap,
[ --with-openldap Enables the use of the OpenLDAP
],,)
AC_ARG_ENABLE(lockdown,
[ --enable-lockdown Enables the gconf integration work in OOo
],,)
AC_ARG_ENABLE(vba,
[ --disable-vba disables the vba compatibility feature
],,)
AC_ARG_WITH(vba-package-format,
[ --with-vba-package-format specify package format for vba compatibility api.
Specifying "builtin" means the api component and
associated type library are part of the installation set.
Specifying "extn" creates an uno extension that is
part of the installation set ( located in the program
directory ) that MUST be optionly registered using
either the unopkg executeable or the extension manager
gui.
Note: "builtin" is the default, "extn" can cause
problems.
Usage: --with-vba-package-format="builtin" or
--with-vba-package-format="extn"
],,)
AC_ARG_ENABLE(pch,
[ --enable-pch EXPERIMENTAL: Enables precompiled header support for C++.
],,)
AC_ARG_WITH(fonts,
[ --without-fonts OOo includes some third-party fonts to provide a reliable
basis for help content, templates, samples, etc.
When these fonts are already known to be available on the
system then you should use this option.
],,)
AC_ARG_WITH(ppds,
[ --without-ppds Removes Postscript Printer definition files from
Apache Openoffice installation set, for people building
for specific distributions where PPDs are known to be
already available (every recent distro with CUPS
backend)
],,)
AC_ARG_WITH(afms,
[ --without-afms Removes bitmap font files from Apache Openoffice
installation set, for people building for specific
distributions where AFM files or TrueType Fonts
are known to be available.
],,)
AC_ARG_ENABLE(epm,
[ --disable-epm AOO includes self-packaging code, that requires
epm, however epm is useless for large scale
package building.
],,enable_epm="yes")
AC_ARG_WITH(epm,
[ --with-epm Decides which epm to use. Default is to use
the one from the system if one is built. When
either this is not there or you say =internal
epm will be built.
],,)
AC_ARG_WITH(epm-url,
[ --with-epm-url=<URL> Specify the location of downloadable epm 3.7 source code. For example:
http://epm.sourcearchive.com/downloads/3.7-1/epm_3.7.orig.tar.gz
or
http://www.msweet.org/files/project2/epm-3.7-source.tar.gz
Note that epm is under GPL license.
],[ EPM_URL="$withval"
])
AC_ARG_WITH(package-format,
[ --with-package-format specify package format(s) for OOo installsets.
Default is "normal" one of the OS/Distribution.
Usage: --with-package-format="foo bar"
],,)
AC_ARG_ENABLE(odk,
[ --disable-odk OO.o includes an ODK, office development kit
which some packagers may with to build without
],,enable_odk="yes")
AC_ARG_ENABLE(mathmldtd,
[ --disable-mathmldtd disable mathmldtd
(useful for distributions that want to avoid packaging
it)
],,enable_mathmldtd="yes")
AC_ARG_ENABLE(evolution2,
[ --enable-evolution2 Allows the built-in evolution 2 addressbook
connectivity build to be enabled.
],,)
AC_ARG_WITH(system-stdlibs,
[ --with-system-stdlibs use libstdc++/libgcc_s already on system
],,)
AC_ARG_ENABLE(cups,
[ --disable-cups disable CUPS support (for printing on UNIX)
],,enable_cups=yes)
AC_ARG_ENABLE(fontconfig,
[ --disable-fontconfig disable support for the fontconfig library
],,enable_fontconfig=yes)
AC_ARG_ENABLE(directx,
[ --disable-directx Remove DirectX implementation for the new XCanvas
interface. The DirectX support requires more stuff
installed on Windows to compile.
(DirectX SDK, GDI+ libs)
],,enable_directx=yes)
AC_ARG_ENABLE(activex,
[ --disable-activex Disable the use of ActiveX for windows build.
This switch is mandatory when using VC++ 2005/2008 Express.
Alternatively you can use the Windows Driver Kit (WDK) and
configure with the following switches:
--with-atl-include-dir=$WDK_HOME\inc\atl71
--with-atl-lib-dir=$WDK_HOME\lib\ATL\i386
--with-mfc-include-dir=$WDK_HOME\inc\mfc42
--with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386
],,)
AC_ARG_ENABLE(atl,
[ --disable-atl Disable the use of ATL for windows build.
This switch is mandatory when using VC++ 2005/2008 Express.
Alternatively you can use the Windows Driver Kit (WDK) and
configure with the following switches:
--with-atl-include-dir=$WDK_HOME\inc\atl71
--with-atl-lib-dir=$WDK_HOME\lib\ATL\i386
--with-mfc-include-dir=$WDK_HOME\inc\mfc42
--with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386
],,)
AC_ARG_WITH(atl-include-dir,
[ --with-atl-include-dir Path to ATL include directory for windows build.
This switch is mandatory when using VC++ 2008 Express
and configuring with ATL/ActiveX enabled.
You can use the Windows Driver Kit (WDK) and
configure with the following switch:
--with-atl-include-dir=$WDK_HOME\inc\atl71
],,)
AC_ARG_WITH(atl-lib-dir,
[ --with-atl-lib-dir Path to ATL libraries directory for windows build.
This switch is mandatory when using VC++ 2008 Express
and configuring with ATL/ActiveX enabled.
You can use the Windows Driver Kit (WDK) and
configure with the following switch:
--with-atl-lib-dir=$WDK_HOME\lib\ATL\i386
],,)
AC_ARG_WITH(mfc-include-dir,
[ --with-mfc-include-dir Path to MFC include directory for windows build.
This switch is mandatory when using VC++ 2008 Express
and configuring with ATL/ActiveX enabled.
You can use the Windows Driver Kit (WDK) and
configure with the following switch:
--with-mfc-include-dir=$WDK_HOME\inc\mfc42
],,)
AC_ARG_WITH(mfc-lib-dir,
[ --with-mfc-lib-dir Path to MFC libraries directory for windows build.
This switch is mandatory when using VC++ 2008 Express
and configuring with ATL/ActiveX enabled.
You can use the Windows Driver Kit (WDK) and
configure with the following switch:
--with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386
],,)
AC_ARG_ENABLE(symbols,
[ --enable-symbols Include debugging symbols in output.
WARNING - a complete build needs 8 Gb of space and
takes much longer. (enables -g compiler flag)
--enable-symbols=SMALL sets the gcc -g1 setting
which is smaller.
Enabling symbols disables the stripping of the solver
(--disable-strip-solver).
],,)
AC_ARG_ENABLE(strip-solver,
[ --disable-strip-solver Disable the stripping of the solver.
By default the solver is stripped unless a build with
debugging symbols (--enable-symbols) is requested.
This switch allows to override this setting.
],,)
AC_ARG_ENABLE(werror,
[ --enable-werror Turn warnings to errors. (Has no effect in modules
where the treating of warnings as errors is disabled
explicitly)
],,)
AC_ARG_ENABLE(debug,
[ --enable-debug Include debugging symbols from --enable-symbols
plus extra debugging code. Extra large build!
(enables -g compiler flag and dmake debug=true)
],,)
AC_ARG_ENABLE(dbgutil,
[ --enable-dbgutil Include additional debugging utilities, such as
assertions, object counting, etc. Larger build.
Independent from --enable-debug
],,)
AC_ARG_ENABLE(crashdump,
[ --enable-crashdump Enable the crashdump feature code.
],,)
AC_ARG_ENABLE(cl-standard,
[ --enable-cl-standard For Microsoft C/C++ compiler users, use non-optimizing
standard compiler. ( This just disables optimization
options and therefore removes a lot of warnings when
using the cheaper standard compiler. )
],,)
AC_ARG_ENABLE(win-x64-shellext,
[ --enable-win-x64-shellext Enable the build/usage of Windows 64bit shell extensions.
These extension are used for the system integration on a
Windows 64bit systems. For example supporting the search
in ODF files with the standard Windows search feature.
],,)
AC_ARG_ENABLE(gtk,
[ --disable-gtk Determines whether to use Gtk+ vclplug on platforms
where Gtk+ is available.
],,enable_gtk=yes)
AC_ARG_ENABLE(gstreamer,
[ --enable-gstreamer Determines whether to use the GStreamer media
backend on platforms where GStreamer is available.
],,enable_gstreamer=no)
AC_ARG_ENABLE(systray,
[ --disable-systray Determines whether to build the systray quickstarter.
],,enable_systray=yes)
AC_ARG_ENABLE(cairo,
[ --enable-cairo Determines whether to use Cairo library on
platforms where Cairo is available.
],,enable_cairo=no)
AC_ARG_WITH(system-cairo,
[ --with-system-cairo Use Cairo libraries already on system
],,)
AC_ARG_ENABLE(cairo-canvas,
[ --disable-cairo-canvas Determines whether to build the Cairo canvas on
platforms where Cairo is available.
],,enable_cairo_canvas=yes)
AC_ARG_ENABLE(opengl,
[ --enable-opengl Determines whether to build the OpenGL 3D slide
transitions component
],,enable_opengl=no)
AC_ARG_ENABLE(dbus,
[ --enable-dbus Determines whether to enable presentation mode
screensaver control under GNOME via DBUS
],,enable_dbus=no)
AC_ARG_ENABLE(gconf,
[ --disable-gconf Determines whether to use the GConf support
],,enable_gconf=yes)
AC_ARG_ENABLE(gnome-vfs,
[ --disable-gnome-vfs Determines whether to use the Gnome Virtual Filing
System on platforms where that VFS is available
],,enable_gnome_vfs=yes)
AC_ARG_ENABLE(gio,
[ --enable-gio Determines whether to use the GIO support
],,enable_gio=no)
AC_ARG_ENABLE(static-gtk,
[ --enable-static-gtk Modules that are linked against gtk libraries use
the static libraries instead of the dynamic ones.
(enables -Bstatic linker flag for gtk libraries)
],,)
AC_ARG_ENABLE(layout,
[ --enable-layout Enable the compilation and use of layout dialogs
],,)
AC_ARG_ENABLE(nss-module,
[ --disable-nss-module Whether to use the NSS module that is used for xml-security
],,enable_nss_module=yes)
AC_ARG_ENABLE(kde,
[ --enable-kde Determines whether to use Qt/KDE vclplug on platforms
where Qt and KDE are available.
],,)
AC_ARG_ENABLE(kdeab,
[ --disable-kdeab Disable the KDE address book support
],,if test "$enable_kde" = "yes"; then enable_kdeab=yes; fi)
AC_ARG_ENABLE(kde4,
[ --enable-kde4 Determines whether to use Qt4/KDE4 vclplug on platforms
where Qt4 and KDE4 are available. May be used with --enable-kde
if you want to support both KDE3 and KDE4.
],,)
AC_ARG_ENABLE(rpath,
[ --disable-rpath Disable the use of relative paths in shared libraries
],,)
AC_ARG_ENABLE(pam,
[ --disable-pam Disable pam support.
],,)
AC_ARG_ENABLE(pam-link,
[ --enable-pam-link link with libpam instead of dynamically open it
],,)
AC_ARG_ENABLE(crypt-link,
[ --disable-crypt-link disable linking with libcrypt instead of dynamically
open it (needed for ancient GNU/Linux distributions
without crypt()/libcrypt)
],,enable_crypt_link=yes)
AC_ARG_ENABLE(xrender-link,
[ --enable-xrender-link link with libXrender instead of dynamically open it
],,)
AC_ARG_ENABLE(randr,
[ --disable-randr disable RandR support in the vcl project
],,enable_randr=yes)
AC_ARG_ENABLE(randr-link,
[ --disable-randr-link disable linking with libXrandr, instead dynamically
open it at runtime
],,enable_randr_link=yes)
AC_ARG_WITH(bundled-extension-blobs,
[ --with-bundled-extension-blobs Whitespace seperated list of files in the tarball directory
that are to be bundled as-is for installation as extensions
at the first program start. Make sure to only bundle extensions
which can be installed without requiring a license dialog
and comply with their distribution requirements by updating the
files LICENSE_aggregated and NOTICE_aggregated accordingly
],,)
#AC_ARG_WITH(bundled-prereg-extensions,
#[ --with-bundled-prereg-extensions Whitespace seperated list of files in the tarball directory that
# are to be bundled as pre-registered extensions. Make sure to only bundle
# extensions which can be installed without requiring a license dialog
#],,)
AC_ARG_ENABLE(bundled-dictionaries,
[ --enable-bundled-dictionaries Download dictionaries (spelling, hyphenation, thesaurus)
according to main/extensions.lst and bundle them. Make sure to
comply with their distribution requirements and update the
files LICENSE_aggregated and NOTICE_aggregated accordingly
],,enable_bundled_dictionaries=no)
# Remove the following switches when not in release mode.
AC_ARG_WITH(system-dicts,
[ --with-system-dicts Use dictionaries from system paths- Specify
them via --with-{dict,hyph,thes}-path=/path
if you want to override the default ones
],,)
AC_ARG_WITH(external-dict-dir,
[ --with-external-dict-dir Specify external dictionary dir
],,)
AC_ARG_WITH(external-hyph-dir,
[ --with-external-hyph-dir Specify external hyphenation pattern dir
],,)
AC_ARG_WITH(external-thes-dir,
[ --with-external-thes-dir Specify external thesaurus dir
],,)
# End of remove.
AC_ARG_WITH(system-libs,
[ --with-system-libs Use libs already on system -- enables all
--with-system-* flags except
odbc/sane/xrender-header(s)
],,)
AC_ARG_WITH(system-headers,
[ --with-system-headers Use headers already on system -- enables all
--with-system-* flags for external packages
whose headers are the only entities used i.e.
boost/vigra/odbc/sane/xrender-header(s)
],,)
AC_ARG_WITH(system-jars,
[ --without-system-jars When building with --with-system-libs, also the
needed jars are expected on the system. Use this to
disable that.
(except for the db case where --with-system-db
*has to* imply using the db.jar from there, too)
],,)
AC_ARG_WITH(system-zlib,
[ --with-system-zlib Use zlib already on system
],,)
AC_ARG_WITH(system-nss,
[ --with-system-nss Use NSS already on system
],,)
AC_ARG_WITH(system-openssl,
[ --with-system-openssl Use OpenSSL already on system
],,)
AC_ARG_WITH(system-jpeg,
[ --with-system-jpeg Use jpeg already on system
],,)
AC_ARG_WITH(system-expat,
[ --with-system-expat Use expat already on system
],,)
AC_ARG_WITH(system-libwpd,
[ --with-system-libwpd Use libwpd already on system
],,)
AC_ARG_WITH(system-libxml,
[ --with-system-libxml Use libxml already on system
],,)
AC_ARG_WITH(system-python,
[ --with-system-python Use python already on system
],,)
AC_ARG_WITH(system-icu,
[ --with-system-icu Use icu already on system
],,)
AC_ARG_WITH(system-poppler,
[ --with-system-poppler Use poppler already on system
],,)
AC_ARG_WITH(system-lucene,
[ --with-system-lucene Use lucene already on system
],,)
AC_ARG_WITH(lucene-core-jar,
[ --with-lucene-core-jar=JARFILE Specify path to jarfile manually ],
[ LUCENE_CORE_JAR="$withval"
])
AC_ARG_WITH(lucene-analyzers-jar,
[ --with-lucene-analyzers-jar=JARFILE Specify path to jarfile manually ],
[ LUCENE_ANALYZERS_JAR="$withval"
])
AC_ARG_ENABLE(mysql-connector,
[ --enable-mysql-connector enables the build of the MySQL Connector/OOo extension.
This requires access to the MySQL Connector/C (aka libmysql) to be given, too, with
either the --with-system-mysql or --with-libmysql-path option.
],,)
AC_ARG_WITH(system-mysql,
[ --with-system-mysql Use MySQL libraries already on system, for building the MySQL Connector/OOo extension.
Requires MYSQLCONFIG to point to the mysql_config executable.
],,)
AC_ARG_WITH(libmysql-path,
[ --with-libmysql-path Use Connector/C (libmysql) installation for building the MySQL Connector/OOo extension.
Usage: --with-libmysql-path=<absolute path to your Connector/C installation>
],,)
AC_ARG_WITH(system-mysql-cppconn,
[ --with-system-mysql-cppconn Use MySQL C++ Connector libraries already on system
],,)
AC_ARG_WITH(system-hsqldb,
[ --with-system-hsqldb Use hsqldb already on system
],,)
AC_ARG_WITH(hsqldb-jar,
[ --with-hsqldb-jar=JARFILE Specify path to jarfile manually ],
[ HSQLDB_JAR="$withval"
])
AC_ARG_WITH(system-beanshell,
[ --with-system-beanshell Use beanshell already on system (default)
],,)
AC_ARG_ENABLE(beanshell,
[ --disable-beanshell Disable the use of beanshell.
],,)
AC_ARG_WITH(beanshell-jar,
[ --with-beanshell-jar=JARFILE Specify path to jarfile manually ],
[ BSH_JAR="$withval"
])
AC_ARG_ENABLE(pdfimport,
[ --enable-pdfimport enables the build of the PDF Import extension
],,)
AC_ARG_ENABLE(wiki-publisher,
[ --enable-wiki-publisher enables the build of the Wiki Publisher extension
],,)
AC_ARG_WITH(commons-codec-jar,
[ --with-commons-codec-jar=JARFILE Specify path to jarfile manually ],
[ COMMONS_CODEC_JAR="$withval"
])
AC_ARG_WITH(commons-lang-jar,
[ --with-commons-lang-jar=JARFILE Specify path to jarfile manually ],
[ COMMONS_LANG_JAR="$withval"
])
AC_ARG_WITH(commons-httpclient-jar,
[ --with-commons-httpclient-jar=JARFILE Specify path to jarfile manually ],
[ COMMONS_HTTPCLIENT_JAR="$withval"
])
AC_ARG_WITH(commons-logging-jar,
[ --with-commons-logging-jar=JARFILE Specify path to jarfile manually ],
[ COMMONS_LOGGING_JAR="$withval"
])
AC_ARG_WITH(servlet-api-jar,
[ --servlet-api-jar=JARFILE Specify path to jarfile manually ],
[ SERVLETAPI_JAR="$withval"
])
AC_ARG_ENABLE(report-builder,
[ --enable-report-builder enables the build of the Report Builder extension
],,)
AC_ARG_WITH(sac-jar,
[ --with-sac-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ SAC_JAR="$withval"
])
AC_ARG_WITH(libxml-jar,
[ --with-libxml-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBXML_JAR="$withval"
])
AC_ARG_WITH(flute-jar,
[ --with-flute-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ FLUTE_JAR="$withval"
])
AC_ARG_WITH(jfreereport-jar,
[ --with-jfreereport-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ JFREEREPORT_JAR="$withval"
])
AC_ARG_WITH(liblayout-jar,
[ --with-liblayout-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBLAYOUT_JAR="$withval"
])
AC_ARG_WITH(libloader-jar,
[ --with-libloader-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBLOADER_JAR="$withval"
])
AC_ARG_WITH(libloader-jar,
[ --with-libloader-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBLOADER_JAR="$withval"
])
AC_ARG_WITH(libformula-jar,
[ --with-libformula-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBFORMULA_JAR="$withval"
])
AC_ARG_WITH(librepository-jar,
[ --with-librepository-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBREPOSITORY_JAR="$withval"
])
AC_ARG_WITH(libfonts-jar,
[ --with-libfonts-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBFONTS_JAR="$withval"
])
AC_ARG_WITH(libserializer-jar,
[ --with-libserializer-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBSERIALIZER_JAR="$withval"
])
AC_ARG_WITH(libbase-jar,
[ --with-libbase-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ],
[ LIBBASE_JAR="$withval"
])
AC_ARG_WITH(system-saxon,
[ --with-system-saxon Use saxon already on system (default)
],,)
AC_ARG_ENABLE(saxon,
[ --disable-saxon Disable use of saxon
],,)
AC_ARG_WITH(saxon-jar,
[ --with-saxon-jar=JARFILE Specify path to jarfile manually. This implies --with-system-saxon ],
[ SAXON_JAR="$withval"
])
AC_ARG_WITH(system-libxslt,
[ --with-system-libxslt Use libxslt already on system
],,)
AC_ARG_WITH(system-odbc,
[ --with-system-odbc-headers Use the odbc headers already on system
],,)
AC_ARG_WITH(system-sane,
[ --with-system-sane-header Use sane.h already on system
],,)
AC_ARG_WITH(system-xrender,
[ --with-system-xrender-headers Use XRender headers already on system
],,)
AC_ARG_WITH(system-curl,
[ --with-system-curl Use curl already on system
],,)
AC_ARG_WITH(system-boost,
[ --with-system-boost Use boost already on system
],,)
AC_ARG_WITH(system-mdds,
[ --with-system-mdds Use mdds already on system
],,)
AC_ARG_WITH(system-vigra,
[ --with-system-vigra Use vigra already on system
],,)
AC_ARG_ENABLE(hunspell,
[ --enable-hunspell Determines whether to enable the Hunspell library.
If enabled, the library will be built unless you
specify --with-system-hunspell to use the library
already present on your system.
If disabled, the Spell Checking component will also
be disabled.
(Default: hunspell disabled)
],,enable_hunspell=no)
AC_ARG_WITH(system-hunspell,
[ --with-system-hunspell Use libhunspell already on system
],,)
AC_ARG_WITH(system-mythes,
[ --with-system-mythes Use mythes already on system
],,)
AC_ARG_ENABLE(hyphen,
[ --enable-hyphen Determines whether to enable the Hyphen library.
If enabled, the library will be built unless you
specify --with-system-hyphen to use the library
already present on your system.
If disabled, the Hyphenator component will also
be disabled.
(Default: hyphen disabled)
],,enable_hyphen=no)
AC_ARG_WITH(system-hyphen,
[ --with-system-hyphen Use libhypeh already on system
],,)
AC_ARG_WITH(system-libtextcat,
[ --with-system-libtextcat Use libtextcat already on system
],,)
AC_ARG_WITH(external-libtextcat-data,
[ --with-system-libtextcat-data Use libtextcat data already on system
],,)
AC_ARG_WITH(system-cppunit,
[ --with-system-cppunit Use cppunit already on system
],,)
AC_ARG_WITH(system-redland,
[ --with-system-redland Use redland library already on system
],,)
AC_ARG_WITH(stlport,
[ --with-stlport Only building --without-stlport is supported.
], WITH_STLPORT=$withval , WITH_STLPORT=no)
AC_ARG_WITH(jdk-home,
[ --with-jdk-home if you have installed JDK 1.3 or later on your system
please supply the path here.
Note that this is not the location of the Java binary
but the location of the entire distribution.
Usage: --with-jdk-home=<absolute path to JDK home>
],,)
AC_ARG_WITH(gxx_include_path,
[ --with-gxx-include-path if you want to override the autodetected g++ include
path.
Usage: --with-gxx-include-path=<absolute path to g++ include dir>
],,)
AC_ARG_WITH(java,
[ --with-java Build with[[out]] Java support. If you use
--without-java/--with-java=no then the build will have
no support for Java components, applets, accessibility
or XML filters.
], if test "$withval" = "yes"; then WITH_JAVA=java; else WITH_JAVA=$withval; fi, WITH_JAVA=java)
AC_ARG_ENABLE(gcjaot,
[ --enable-gcjaot Build with[[out]] using Ahead of Time java compilation
support to speed up buildsi by compiling the jars also
to native code..
--enable-gcjaot is only known to work with bytecode
created with gcj or ecj
],,)
AC_ARG_WITH(ant-home,
[ --with-ant-home If you have installed Jakarta Ant on your system,
please supply the path here.
Note that this is not the location of the Ant binary
but the location of the entire distribution.
Usage: --with-ant-home=<absolute path to Ant home>
],,)
AC_ARG_WITH(junit,
[ --with-junit Specifies the JUnit 4 jar file to use for JUnit-based
tests. --without-junit disables those tests. Not
relevant in the --without-java case.
Usage: --with-junit=<absolute path to JUnit 4 jar>
],,with_junit=yes)
AC_ARG_WITH(perl-home,
[ --with-perl-home If you have installed the Perl 5 Distribution, on your
system, please supply the path here.
Note that this is not the location of the Perl binary
but the location of the entire distribution.
Usage: --with-perl-home=<absolute path to Perl 5 home>
],,)
AC_ARG_WITH(cl-home,
[ --with-cl-home For Windows NT users, please supply the path
for the Microsoft C/C++ compiler.
Note that this is not the location of the compiler
binary but the location of the entire distribution.
Usage: --with-cl-home=<absolute path to Microsoft C/C++ compiler home>
],,)
AC_ARG_WITH(mspdb-path,
[ --with-mspdb-path For Microsoft C/C++ compiler users, please supply the
path pointing to the mspdb71.dll (.NET 2003).
Usage: --with-mspdb-path=<absolute path to mspdb71.dll>
],,)
AC_ARG_WITH(midl-path,
[ --with-midl-path For Microsoft C/C++ .NET compiler users, please supply
the path pointing to the midl.exe.
Usage: --with-midl-path=<absolute path to midl.exe>
],,)
AC_ARG_WITH(csc-path,
[ --with-csc-path For Microsoft C/C++ .NET compiler users, please supply
the path pointing to the csc.exe.
Usage: --with-csc-path=<absolute path to csc.exe>
],,)
AC_ARG_WITH(nsis-path,
[ --with-nsis-path For Windows users, please supply the path to the
"Nullsoft Scriptable Install System" (NSIS). If NSIS
is found in the path or this option is supplied a self
contained executable installer for Apache OpenOffice
will be created.
Usage: --with-nsis-path=<absolute path to nsis.exe>
],,)
AC_ARG_WITH(frame-home,
[ --with-frame-home For Microsoft C/C++ .NET compiler users, please supply
the path pointing to lib/mscoree.lib, usually
something like:
"/cygdrive/c/Program Files/Microsoft Visual Studio .NET/FrameworkSDK"
MS Visual Toolkit compiler users, please supply the
path pointing to lib/msvcrt.lib, usually something
like:
"/cygdrive/c/Program Files/Microsoft Visual Studio .NET 2003/Vc7"
Usage: --with-frame-home=<absolute path to Framework SDK [[home]]>
],,)
AC_ARG_WITH(psdk-home,
[ --with-psdk-home For Windows users, please supply the path to the
Microsoft Platform SDK.
Usage: --with-psdk-home=<absolute path to Microsoft Platform SDK>
],,)
AC_ARG_WITH(directx-home,
[ --with-directx-home For Windows users, please supply the path to the
Microsoft DirectX SDK.
Usage: --with-directx-home=<absolute path to Microsoft DirectX SDK>
],,)
AC_ARG_WITH(mozilla-build,
[ --with-mozilla-build For Windows users, please supply the path to the
mozilla build tools.
Usage: --with-mozilla-build=<absolute path to mozilla build tools>
At the moment of this writing, an installer for the mozilla build tools
can be obtained from http://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32.
],[MOZILLABUILD=$withval],)
AC_ARG_WITH(local-solenv,
[ --with-local-solenv If you have solenv in a location other than ./solenv,
please supply the path here.
Usage: --with-local-solenv=<absolute path to solenv>
],,)
AC_ARG_WITH(local-solver,
[ --with-local-solver if you have solver in a location other than ./solver,
please supply the path here.
Usage: --with-local-solver=<absolute path to solver>
],,)
AC_ARG_ENABLE(javascript,
[ --disable-javascript Disables support for JavaScript macros.
],,)
AC_ARG_WITH(system-apr,
[ --with-system-apr Use apr library already installed on the system
],,)
AC_ARG_WITH(system-apr-util,
[ --with-system-apr-util Use apr-util library already installed on the system
],,)
AC_ARG_WITH(system-serf,
[ --with-system-serf Use serf library already installed on the system
],,)
AC_ARG_WITH(system-coinmp,
[ --with-system-coinmp Use CoinMP library already installed on the system
],,)
AC_ARG_ENABLE(coinmp,
[ --disable-coinmp Do not use CoinMP as the Calc solver.
],,)
AC_ARG_ENABLE(check-only,
[ --enable-check-only Use this option option if you just want to check your
environment. This option stops the generation of an
????env.set
Usage: --enable-check-only=yes
],,)
AC_ARG_ENABLE(ccache-skip,
[[ --enable-ccache-skip [default=auto] allow the use of --ccache-skip to
escape compiler flags that would otherwise prevent
caching of the result (currently used on Mac only)
NOTE: requires patched version because of a bug in
ccache (see issue 104567 for details and patch)
explicitly enable if your version of ccache does not
identify as version 2.4_OOo
]],,enable_ccache_skip=auto)
AC_ARG_WITH(lang,
[ --with-lang Use this option to build Apache OpenOffice with
additional language support. English (US) is always
included by default. Separate multiple languages with
space. For all languages, use --with-lang=ALL.
Usage: --with-lang="es sw tu cs sk"
],,)
AC_ARG_WITH(poor-help-localizations,
[ --with-poor-help-localizations
Use this option to specify which languages have
unusable help localizations. Separate multiple
languages with space.
Usage: --with-poor-help-localizations="af ar be-BY ca"
],,)
AC_ARG_WITH(dict,
[ --with-dict Use this option to build Apache OpenOffice with
dictionary support. ALL dictionaries are always
included by default unless overridden with
this option. Separate multiple dictionaries with
commas. For all dictionaries, use --with-dict=ALL.
Usage: --with-dict=ENGB,ENUS,ITIT
],,)
AC_ARG_WITH(intro-bitmaps,
[ --with-intro-bitmaps Prefer the specified intro bitmaps over the
the default one. Can be more than one (separated by
commas), the order means priority of fallback if the
first does not exist (in the installed tree).
Usage: --with-intro-bitmaps=/path/my_ooo_intro.bmp
],,)
AC_ARG_WITH(about-bitmaps,
[ --with-about-bitmaps Similarly to --with-intro-bitmaps, this allows
specification of bitmaps for the About box.
Usage: --with-about-bitmaps=/path/my_ooo_about.bmp
],,)
AC_ARG_WITH(vendor,
[ --with-vendor Set vendor of the build.
Usage: --with-vendor="John the Builder"
],,)
AC_ARG_WITH(unix-wrapper,
[ --with-unix-wrapper Redefines the name of the UNIX wrapper that will be used
in the desktop files and in the desktop-integration RPMs.
Usage: --with-unix-wrapper=ooffice
],,)
AC_ARG_WITH(asm-home,
[ --with-asm-home For Windows users, please supply the path for the
ml.exe assembler.
Usage: --with-asm-home=<path to ml.exe directory>
],,)
AC_ARG_WITH(os-version,
[ --with-os-version For FreeBSD users, use this option option to override
the detected OSVERSION.
Usage: --with-os-version=<OSVERSION>
],,)
AC_ARG_WITH(unzip-home,
[ --with-unzip-home Deprecated: use --with-zip-home instead],,)
AC_ARG_WITH(zip-home,
[ --with-zip-home If you use a non standard zip, for example windows
please supply the path for zip
Usage: --with-zip-home=<path to zip executable>
],,)
AC_ARG_WITH(mingwin,
[ --with-mingwin For Windows users, use the mingwin32 compiler within
cygwin environment
Usage: --with-mingwin=yes
For !Windows use, use the mingw32 C++ compiler to
(re-) build unowinreg.dll. Specify the MinGW C++
Compilers name.
Usage: --with-mingwin=i586-mingw32msvc-g++
],WITH_MINGWIN=$withval,WITH_MINGWIN=0)
AC_ARG_WITH(build-version,
[ --with-build-version Allows the builder to add a custom version tag
that will appear in the Help/About box for QA
purposes.
Usage: --with-build-version="Built by Jim"
],with_build_version=$withval)
AC_ARG_WITH(alloc,
[ --with-alloc Define which allocator to build with
(choices are oo, system, tcmalloc, jemalloc)
Note that on FreeBSD/NetBSD system==jemalloc
],,)
AC_ARG_ENABLE(verbose,
[ --enable-verbose Increase build verbosity.
--disable-verbose Decrease build verbosity.
],,)
AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking Disables generation of dependency information.
],,)
AC_ARG_ENABLE(category-b,
[ --enable-category-b Activate components under a category B license
(see http://www.apache.org/legal/3party.html#category-b):
MPL (seamonkey, hunspell, hyphen, nss, saxon, rhino),
CPL (silgraphite), CPL/EPL (CoinMP), SPL (beanshell),
OFL (fonts).
Flags for individual libraries override this one.
],,)
AC_ARG_WITH(arm-target,
[ --arm-target The minimal targeted arm processor
used for the build environment.
Cases :
arm-target < 6 : armv4t compatibility
arm-target = 6 : exact armv6 compatibility
arm-target > 6 : armv7-a compatibility
Usage: --with-arm-target=7
],with_arm_target=$withval,with_arm_target=4)
AC_ARG_WITH(rat-scan,
[ --with-rat-scan Scan source code for license headers.
Use as --with-rat-scan to automatically download pre-built Rat binaries.
Alternatively use as --with-rat-scan=<path-to-rat-direcetory> to use
a separately installed library.
],with_rat_scan=$withval,)
BUILD_TYPE="OOo"
ADDITIONAL_REPOSITORIES="../ext_libraries"
SCPDEFS=""
dnl ===================================================================
dnl Check configure script vs. configure.in
dnl ===================================================================
AC_MSG_CHECKING([whether configure is up-to-date])
if test "configure" -ot "configure.in"; then
AC_MSG_RESULT([no])
AC_MSG_ERROR([configure is not up-to-date, run autoconf first!])
else
AC_MSG_RESULT([yes])
fi
dnl ===================================================================
dnl Message.
dnl ===================================================================
echo "********************************************************************"
echo "* *"
echo "* Apache OpenOffice build configuration. *"
echo "* *"
echo "* The configure process checks your platform to see whether *"
echo "* you can build Apache OpenOffice on it. *"
echo "* This process checks all pre-requisites and generates a file *"
echo "* containing the necessary environment variables. *"
echo "* Source this file after configure has ended successfully. *"
echo "* *"
echo "* Warnings that are generated during the configure process *"
echo "* must be taken into account since it can be a reason for *"
echo "* an unsuccessful build of Apache OpenOffice. *"
echo "* *"
echo "********************************************************************"
echo ""
echo "********************************************************************"
echo "* *"
echo "* Checking the platform pre-requisites. *"
echo "* *"
echo "********************************************************************"
echo ""
dnl ===================================================================
dnl Configure pre-requisites.
dnl ===================================================================
cat /dev/null > warn
AC_PROG_EGREP
AC_PROG_AWK
AC_PATH_PROG( AWK, $AWK)
if test -z "$AWK"; then
AC_MSG_ERROR([install awk to run this script])
fi
AC_PATH_PROGS(SED, sed )
if test -z "$SED"; then
AC_MSG_ERROR([install sed to run this script])
fi
AC_MSG_CHECKING([for solenv environment])
if test -z "$with_local_solenv"; then
LOCAL_SOLENV="DEFAULT"
AC_MSG_RESULT([default])
else
LOCAL_SOLENV=$with_local_solenv
AC_MSG_RESULT([$with_local_solenv])
fi
AC_SUBST(LOCAL_SOLENV)
if test "$LOCAL_SOLENV" = "DEFAULT"; then
_solenv="./solenv"
else
_solenv="$LOCAL_SOLENV"
fi
AC_SUBST(_solenv)
if test -e $_solenv/inc/minor.mk; then
# Get UPD number from ./solenv/inc/minor.mk
UPD="`grep RSCVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`"
AC_SUBST(UPD)
SOURCEVERSION="`grep SOURCEVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`"
AC_SUBST(SOURCEVERSION)
else
AC_MSG_ERROR([$_solenv/inc/minor.mk missing but needed for architecture/os detecion and proper environment script generation...])
fi
dnl ==================================================================
dnl Checks for custom pack.lst
dnl ==================================================================
AC_MSG_CHECKING([for custom pack.lst])
CUSTOM_PACK_LIST=
USE_PACKAGER=
if test -n "$with_packager_list" ; then
if test -e $with_packager_list; then
CUSTOM_PACK_LIST=$with_packager_list
USE_PACKAGER=YES
fi
fi
if test -n "$CUSTOM_PACK_LIST"; then
AC_MSG_RESULT([$CUSTOM_PACK_LIST])
else
AC_MSG_RESULT([no])
fi
AC_SUBST(CUSTOM_PACK_LIST)
AC_SUBST(USE_PACKAGER)
dnl ===================================================================
dnl Checks for the operating system and processor.
dnl ===================================================================
AC_CANONICAL_SYSTEM
if test "$build" != "$host" -o "$build" != "$target" \
-o "$host" != "$target"; then
AC_MSG_WARN([cross-compiling by any means is not supported (yet)!])
echo "cross-compiling by any means is not supported (yet)!" >> warn
fi
if echo "$build_os" | grep cygwin; then
AC_MSG_CHECKING([Cygwin version])
CygwinVer=`uname -r`
AC_MSG_RESULT([$CygwinVer])
if test "`echo $CygwinVer | $AWK -F . '{ print $1$2 }'`" -lt "15"; then
AC_MSG_ERROR([You need at least Cygwin V1.5.x])
fi
else
CygwinVer="false"
fi
# get info about the system provided release/version details
head /etc/*-release
uname -a
dnl ===================================================================
dnl The following is a list of supported systems.
dnl Sequential to keep the logic very simple
dnl These values may be checked and reset later.
dnl ===================================================================
case "$build_os" in
solaris*)
test_gtk=yes
test_cairo=yes
test_kde=yes
test_cups=yes
test_randr=yes
test_freetype=yes
test_gstreamer=yes
_os=SunOS
AC_PATH_PROG( GNUTAR, gtar,,$PATH:/usr/sfw/bin)
if test -z "$GNUTAR"; then
AC_MSG_ERROR([gtar (gnu tar) not found but needed. Install it (SUN Freeware package).])
fi
AC_SUBST(GNUTAR)
dnl ===========================================================
dnl check whether we're using solaris 6,7,8 - sparc or intel.
dnl ===========================================================
AC_MSG_CHECKING([the Solaris operating system release])
_os_release=`echo $build_os | $SED -e s/solaris2\.//`
if test "$_os_release" -lt "6"; then
AC_MSG_ERROR([use solaris >= 6 to build Apache OpenOffice])
else
AC_MSG_RESULT([ok ($_os_release)])
fi
dnl check whether we're using a sparc or i386 processor
AC_MSG_CHECKING([the processor type])
if test "$build_cpu" = "sparc" -o "$build_cpu" = "i386"; then
AC_MSG_RESULT([ok ($build_cpu)])
else
AC_MSG_ERROR([only sparc and i386 processors are supported])
fi
;;
linux-gnu*|k*bsd*-gnu*)
test_gtk=yes
test_cairo=yes
test_kde=yes
test_kde4=yes
test_cups=yes
test_randr=yes
test_freetype=yes
test_gstreamer=yes
_os=Linux
;;
gnu)
test_cups=no
_os=GNU
;;
cygwin*) # Windows
test_cups=no
test_cairo=yes
test_freetype=no
test_gstreamer=no
_os=WINNT
;;
darwin*) # Mac OS X
test_cups=yes
test_gtk=yes
test_cairo=yes
test_randr=no
test_freetype=no
test_gstreamer=no
_os=Darwin
if test "$enable_systray" = "yes" && test "$enable_gtk" != "no"; then
AC_MSG_WARN([Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray])
echo "Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray" >>warn
enable_systray=no
fi
if test ! -n "$CC"; then
CC="`xcrun -f clang` -arch x86_64"
fi
if test ! -n "$CXX"; then
CXX="`xcrun -f clang++` -arch x86_64 -std=c++11"
fi
;;
os2*)
test_x=no
test_cups=no
test_randr=no
test_gtk=no
test_freetype=no
test_gstreamer=no
_os=OS2
;;
freebsd*)
test_gtk=yes
test_cairo=yes
test_kde=yes
test_kde4=yes
test_cups=yes
test_randr=yes
test_freetype=yes
test_gstreamer=yes
AC_MSG_CHECKING([the FreeBSD operating system release])
if test -n "$with_os_version"; then
OSVERSION="$with_os_version"
else
OSVERSION=`/sbin/sysctl -n kern.osreldate`
fi
AC_MSG_RESULT([found OSVERSION=$OSVERSION])
AC_MSG_CHECKING([which thread library to use])
if test "$OSVERSION" -lt "500016"; then
PTHREAD_CFLAGS="-D_THREAD_SAFE"
PTHREAD_LIBS="-pthread"
elif test "$OSVERSION" -lt "502102"; then
PTHREAD_CFLAGS="-D_THREAD_SAFE"
PTHREAD_LIBS="-lc_r"
else
PTHREAD_CFLAGS=""
PTHREAD_LIBS="-pthread"
fi
AC_MSG_RESULT([$PTHREAD_LIBS])
_os=FreeBSD
;;
osf)
test_cups=no
test_randr=no
_os=OSF1
;;
netbsd)
test_gtk=yes
test_cairo=yes
test_kde=yes
test_kde4=yes
test_cups=no
test_randr=yes
test_freetype=yes
test_gstreamer=yes
PTHREAD_CFLAGS="-pthread"
PTHREAD_LIBS="-pthread -lpthread"
_os=NetBSD
;;
aix*)
test_cups=no
test_randr=no
test_freetype=yes
test_gstreamer=yes
PTHREAD_LIBS=-pthread
echo "AIX is an alpha port --- Use at own risk" >> warn
_os=AIX
;;
*)
AC_MSG_ERROR([$_os operating system is not suitable to build Apache OpenOffice!])
;;
esac
AC_SUBST(OSVERSION)
AC_SUBST(PTHREAD_CFLAGS)
AC_SUBST(PTHREAD_LIBS)
dnl Ensure pkg-config is initialized before any possible use
PKG_PROG_PKG_CONFIG
dnl ===================================================================
dnl Set the ENABLE_CRASHDUMP variable.
dnl ===================================================================
AC_MSG_CHECKING([whether to enable crashdump feature])
if test "$enable_crashdump" = "yes"; then
ENABLE_CRASHDUMP="TRUE"
BUILD_TYPE="$BUILD_TYPE CRASHREP"
AC_MSG_RESULT([yes])
else
ENABLE_CRASHDUMP=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_CRASHDUMP)
if test "$_os" = "WINNT"; then
BUILD_TYPE="$BUILD_TYPE TWAIN"
fi
if test "$_os" = "WINNT"; then
dnl ===================================================================
dnl Set the VC_STANDARD variable.
dnl ===================================================================
AC_MSG_CHECKING([whether to use the standard non-optimizing compiler])
if test "$enable_cl_standard" = "" -o "$enable_cl_standard" = "no"; then
VC_STANDARD=""
AC_MSG_RESULT([no])
else
VC_STANDARD="TRUE"
AC_MSG_RESULT([yes])
fi
AC_SUBST(VC_STANDARD)
fi
if test "$_os" = "WINNT"; then
dnl ===================================================================
dnl Set the BUILD_X64 variable.
dnl ===================================================================
AC_MSG_CHECKING([whether to build/use the Windows 64bit shell extensions])
if test "$enable_win_x64_shellext" = "" -o "$enable_win_x64_shellext" = "no"; then
BUILD_X64=""
AC_MSG_RESULT([no])
else
BUILD_X64="TRUE"
AC_MSG_RESULT([yes])
fi
AC_SUBST(BUILD_X64)
fi
dnl ===================================================================
dnl Set the ENABLE_WERROR variable. (Activate --enable-werror)
dnl ===================================================================
AC_MSG_CHECKING([whether to turn warnings to errors])
if test -n "$enable_werror" && test "$enable_werror" != "no"; then
ENABLE_WERROR="TRUE"
AC_MSG_RESULT([yes])
AC_MSG_WARN([Turning warnings to errors has no effect in modules or])
AC_MSG_WARN([on platforms where it has been disabled explicitely])
echo "Turning warnings to errors has no effect in modules or on platforms where it has been disabled explicitely" >> warn
else
ENABLE_WERROR="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_WERROR)
dnl ===================================================================
dnl Set the ENABLE_DEBUG variable. (Activate --enable-symbols)
dnl ===================================================================
AC_MSG_CHECKING([whether to do a debug build])
if test -n "$enable_debug" && test "$enable_debug" != "no"; then
ENABLE_DEBUG="TRUE"
if test -z "$enable_symbols"; then
enable_symbols="yes"
fi
AC_MSG_RESULT([yes])
else
ENABLE_DEBUG="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_DEBUG)
dnl ===================================================================
dnl Set the ENABLE_DBGUTIL variable
dnl ===================================================================
AC_MSG_CHECKING([whether to build with additional debug utilities])
if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then
PROEXT=""
PRODUCT=""
PROFULLSWITCH=""
AC_MSG_RESULT([yes])
else
PRODUCT="full"
PROFULLSWITCH="product=full"
PROEXT=".pro"
AC_MSG_RESULT([no, full product build])
fi
AC_SUBST(PRODUCT)
AC_SUBST(PROFULLSWITCH)
AC_SUBST(PROEXT)
dnl ===================================================================
dnl First setting is whether to include symbols into final build.
dnl ===================================================================
AC_MSG_CHECKING([whether to include symbols into final build])
if test -n "$enable_symbols" && test "$enable_symbols" != "no"; then
if test "$enable_symbols" = "yes" -o "$enable_symbols" = "TRUE"; then
ENABLE_SYMBOLS="TRUE"
AC_MSG_RESULT([yes])
else
if test "$enable_symbols" = "SMALL" -o "$enable_symbols" = "small"; then
ENABLE_SYMBOLS="SMALL"
AC_MSG_RESULT([yes, small ones])
else if test "$enable_symbols" != "no" ; then
echo enable symbols is: $enable_symbols
AC_MSG_ERROR([--enable-symbols only accepts yes, TRUE or SMALL as parameter.])
else
ENABLE_SYMBOLS=
fi
fi
fi
else
ENABLE_SYMBOLS=
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_SYMBOLS)
dnl ===================================================================
dnl Determine if the solver is to be stripped or not.
dnl ===================================================================
AC_MSG_CHECKING([whether to strip the solver or not.])
if test -n "$enable_strip_solver"; then
if test "$enable_strip_solver" = "yes"; then
DISABLE_STRIP=
else if test "$enable_strip_solver" = "no"; then
DISABLE_STRIP="TRUE"
else
AC_MSG_ERROR([--disable-strip-solver only accepts yes or no as parameter.])
fi
fi
else
if test -n "$ENABLE_SYMBOLS"; then
DISABLE_STRIP="TRUE"
else
DISABLE_STRIP=
fi
fi
if test -z "$DISABLE_STRIP"; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
AC_SUBST(DISABLE_STRIP)
dnl ===================================================================
dnl Build options
dnl ===================================================================
# Disable or enable category-B librariets: nss, hunspell, hyphen, saxon,
# rhino, silgraphite, beanshell.
# Note that further below they may be enabled or disabled again by
# more specific options.
ENABLE_CATEGORY_B=
AC_MSG_CHECKING([whether to enable category B components])
# Category B modules (libraries):
# nss (nss)
# hunspell (hunspell)
# hyphen (hyphen)
# saxon (saxon)
# rhino (rhino)
# beanshell (beanshell)
# graphite (silgraphite)
if test "$enable_category_b" = "yes"; then
ENABLE_CATEGORY_B=YES
enable_hunspell="yes"
enable_hyphen="yes"
enable_saxon="yes"
enable_javascript="yes"
enable_beanshell="yes"
enable_graphite="yes"
enable_coinmp="yes"
enable_category_b_fonts="yes"
AC_MSG_RESULT([yes: allow modules nss, hunspell, hyphen, saxon, rhino, beanshell, graphite, coinmp to be built])
else
# Disable libaries.
enable_nss_module="no"
enable_hunspell="no"
enable_hyphen="no"
enable_saxon="no"
enable_javascript="no"
enable_beanshell="no"
enable_graphite="no"
enable_coinmp="no"
enable_category_b_fonts="no"
AC_MSG_RESULT([no: disabled modules nss, hunspell, hyphen, saxon, rhino, beanshell, graphite, coinmp])
fi
AC_SUBST(ENABLE_CATEGORY_B)
# gstreamer is used only via pre-installed libraries: not a problem
dnl ===================================================================
dnl Online Update
dnl ===================================================================
AC_MSG_CHECKING([whether to enable the Online Update support])
if test "$enable_online_update" = "yes" -o "$enable_online_update" = "TRUE"; then
ENABLE_ONLINE_UPDATE="YES"
SCPDEFS="$SCPDEFS -DENABLE_ONLINE_UPDATE"
AC_MSG_RESULT([yes])
else
ENABLE_ONLINE_UPDATE=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_ONLINE_UPDATE)
AC_MSG_CHECKING([whether to enable native CUPS support])
if test "$test_cups" = "yes" -a \( "$enable_cups" = "yes" -o "$enable_cups" = "TRUE" \) ; then
ENABLE_CUPS="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_CUPS=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_CUPS)
AC_MSG_CHECKING([whether to enable fontconfig support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a \( "$enable_fontconfig" = "yes" -o "$enable_fontconfig" = "TRUE" \); then
ENABLE_FONTCONFIG="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_FONTCONFIG=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_FONTCONFIG)
dnl ===================================================================
dnl find external tarballs.
dnl ===================================================================
if test -z $TARFILE_LOCATION; then
TARFILE_LOCATION="DEFAULT"
fi
AC_SUBST(TARFILE_LOCATION)
if test -z "$enable_fetch_external" || test "$enable_fetch_external" = "yes" \
&& test -z "$with_system_libs" -a "$with_system_jars" != "no"; then
DO_FETCH_TARBALLS="yes"
fi
AC_SUBST(DO_FETCH_TARBALLS)
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([whether to use DirectX])
ENABLE_DIRECT_DRAW=""
if test "$enable_directx" = "yes" -o "$enable_directx" = "TRUE" -o "$enable_directx" = ""; then
ENABLE_DIRECTX="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_DIRECTX=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_DIRECTX)
AC_MSG_CHECKING([whether to use ActiveX])
if test "$enable_activex" = "yes" -o "$enable_activex" = "TRUE" -o "$enable_activex" = ""; then
DISABLE_ACTIVEX=""
AC_MSG_RESULT([yes])
else
DISABLE_ACTIVEX="TRUE"
AC_MSG_RESULT([no])
fi
AC_MSG_CHECKING([whether to use ATL])
if test "$enable_atl" = "yes" -o "$enable_atl" = "TRUE" -o "$enable_atl" = ""; then
DISABLE_ATL=""
AC_MSG_RESULT([yes])
else
DISABLE_ATL="TRUE"
dnl ActiveX depends on ATL, it should be disabled
DISABLE_ACTIVEX="TRUE"
AC_MSG_RESULT([no])
fi
AC_SUBST(DISABLE_ATL)
AC_SUBST(DISABLE_ACTIVEX)
fi
dnl ===================================================================
dnl Disable rpath in shared libraries?
dnl ===================================================================
AC_MSG_CHECKING([whether to use RPATH in shared libraries])
if test "$enable_rpath" = "no"; then
ENABLE_RPATH="no"
else
ENABLE_RPATH="yes"
fi
AC_MSG_RESULT([$ENABLE_RPATH])
AC_SUBST(ENABLE_RPATH)
dnl ===================================================================
dnl Check extensions to be bundled as literal blobs
dnl ===================================================================
if test -n "$with_bundled_extension_blobs"; then
BUNDLED_EXTENSION_BLOBS="$with_bundled_extension_blobs"
else
BUNDLED_EXTENSION_BLOBS=
fi
AC_SUBST(BUNDLED_EXTENSION_BLOBS)
#dnl ===================================================================
#dnl Check extensions that are to be bundled as pre-registerd
#dnl ===================================================================
if test -n "$with_bundled_prereg_extensions"; then
BUNDLED_PREREG_EXTENSIONS="$with_bundled_prereg_extensions"
else
BUNDLED_PREREG_EXTENSIONS=
fi
AC_SUBST(BUNDLED_PREREG_EXTENSIONS)
dnl ===================================================================
dnl Configure system provided dictionary/hyphenation/thesaurus
dnl ===================================================================
AC_MSG_CHECKING([whether to use dicts from external paths])
if test -n "$with_system_dicts" -a "$with_system_dicts" = "yes"; then
AC_MSG_RESULT([yes])
SYSTEM_DICTS=YES
AC_MSG_CHECKING([for spelling dictionary directory])
if test -n "$with_external_dict_dir"; then
DICT_SYSTEM_DIR=file://$with_external_dict_dir
else
DICT_SYSTEM_DIR=file:///usr/share/hunspell
fi
AC_MSG_RESULT([$DICT_SYSTEM_DIR])
AC_MSG_CHECKING([for hyphenation patterns directory])
if test -n "$with_external_hyph_dir"; then
HYPH_SYSTEM_DIR=file://$with_external_hyph_dir
else
HYPH_SYSTEM_DIR=file:///usr/share/hyphen
fi
AC_MSG_RESULT([$HYPH_SYSTEM_DIR])
AC_MSG_CHECKING([for thesaurus directory])
if test -n "$with_external_thes_dir"; then
THES_SYSTEM_DIR=file://$with_external_thes_dir
else
THES_SYSTEM_DIR=file:///usr/share/mythes
fi
AC_MSG_RESULT([$THES_SYSTEM_DIR])
else
AC_MSG_RESULT([no])
SYSTEM_DICTS=NO
fi
AC_SUBST(SYSTEM_DICTS)
AC_SUBST(DICT_SYSTEM_DIR)
AC_SUBST(HYPH_SYSTEM_DIR)
AC_SUBST(THES_SYSTEM_DIR)
if test $_os = "WINNT"; then
AC_MSG_CHECKING([Windows build environment sanity])
dnl ===================================================================
dnl Sanity check! Native windows programs cannot use cygwin symlinks!
dnl ===================================================================
dnl As long as awk instead of $AWK is used somewhere in the sources,
dnl check for $AWK and awk. $AWK is pointing to gawk in cygwin.
if test -L $AWK -o -L `which awk` -o -L `which tar` -o -L `which gunzip` ; then
AC_MSG_ERROR([$AWK, awk, tar or gunzip is a cygwin symlink!
Native windows programs cannot use cygwin symlinks. Remove the symbolic
link, and copy the program to the name of the link.])
fi
dnl ===================================================================
dnl Another sanity check! More a band-aid. winenv.* adds guw.exe to
dnl CC and CXX but the configure checks here assume that guw.exe
dnl (if needed at all) is not yet present.
dnl ===================================================================
CC=`echo $CC | $SED "s/^guw.exe //"`
CXX=`echo $CXX | $SED "s/^guw.exe //"`
dnl ===================================================================
dnl If $CC is set to a MinGW compiler, e.g. "gcc -mno-cygwin" enable
dnl $WITH_MINGWIN
dnl ===================================================================
if test -n "$CC";then
if test "`$CC -dumpmachine 2>/dev/null | $SED -e 's/^.*-//'`" = "mingw32"; then
WITH_MINGWIN="yes"
fi
fi
dnl ===================================================================
if test "$WITH_MINGWIN" = "yes" ; then
if test -z "$CC"; then
CC="gcc -mno-cygwin"
CXX="g++ -mno-cygwin"
fi
fi
AC_MSG_RESULT([ok])
fi
AC_SUBST(WITH_MINGWIN)
dnl ===================================================================
dnl Extra check for Windows. cygwin builds need gcc to build dmake
dnl and g++ to build guw.exe although MS cl (or MinGW) is used to
dnl build OOo.
dnl ===================================================================
if test "$_os" = "WINNT" ; then
AC_MSG_CHECKING([for cygwin gcc/g++])
if which gcc > /dev/null && which g++ > /dev/null ; then
AC_MSG_RESULT([found])
else
AC_MSG_ERROR([cygwin gcc and g++ are needed, please install them.])
fi
fi
dnl ===================================================================
dnl Check whether the bash shell can be used.
dnl ===================================================================
AC_PATH_PROG(SHELLPATH, bash)
if test -z "$SHELLPATH"; then
AC_MSG_ERROR([bash not found in \$PATH])
else
SHELLPATH=`echo $SHELLPATH | $SED -n "s/\/bash$//p"`
fi
AC_SUBST(SHELLPATH)
dnl ===================================================================
dnl Checks for c compiler,
dnl The check for the c++ compiler is later on.
dnl ===================================================================
AC_MSG_CHECKING([gcc home])
if test -z "$with_gcc_home"; then
GCC_HOME=`which gcc | $SED -e s,/bin/gcc,,`
else
GCC_HOME="$with_gcc_home"
fi
AC_MSG_RESULT($GCC_HOME)
AC_SUBST(GCC_HOME)
save_CC=$CC
save_CXX=$CXX
if test -n "$with_gcc_home"; then
if test -z "$CC"; then
CC="$with_gcc_home/bin/gcc"
fi
fi
dnl The following checks for gcc, cc and then cl (if it weren't guarded for win32)
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_PROG_CC
fi
COMPATH=`dirname "$CC"`
if test "$COMPATH" = "." ; then
AC_PATH_PROGS(COMPATH, $CC)
dnl double square bracket to get single because of M4 quote...
COMPATH=`echo $COMPATH | $SED "s@/[[^/:]]*\\\$@@"`;
fi
CC_PATH="$COMPATH/"
COMPATH=`echo $COMPATH | $SED "s@/[[Bb]][[Ii]][[Nn]]\\\$@@"`;
dnl ===================================================================
dnl Test the gcc version, 3 is OK
dnl ===================================================================
GCCVER=20995
if test \( "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes" \) -a "$GCC" = "yes"; then
AC_MSG_CHECKING([the GNU gcc compiler version])
_gcc_version=`$CC -dumpversion`
_gcc_major=`echo $_gcc_version | $AWK -F. '{ print \$1 }'`
GCCVER=`echo $_gcc_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
if test "$_gcc_major" -lt "3"; then
AC_MSG_ERROR([found version "$_gcc_version", use version 3+ of the gcc compiler])
else
if test "$GCCVER" -eq "030203"; then
if test "$ENABLE_SYMBOLS" = "SMALL"; then
AC_MSG_ERROR([version "$_gcc_version" gives internal error with small.])
fi
fi
fi
if test "$_os" = "Darwin" ; then
AC_MSG_RESULT([implicitly using CC=$CC])
else
AC_MSG_RESULT([checked (gcc $_gcc_version)])
fi
if test "$_os" = "SunOS"; then
AC_MSG_CHECKING([gcc linker])
if $CC -Wl,--version 2>&1 |head -n 1| grep -v GNU > /dev/null;then
AC_MSG_ERROR([failed (not GNU ld). Use GNU ld instead of Sun ld on Solaris])
fi
AC_MSG_RESULT([ok (GNU ld)])
fi
fi
AC_SUBST(GCCVER)
HAVE_LD_BSYMBOLIC_FUNCTIONS=
if test "$GCC" = "yes"; then
AC_MSG_CHECKING( for -Bsymbolic-functions linker support )
bsymbolic_functions_ldflags_save=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-Bsymbolic-functions -Wl,--dynamic-list-cpp-new -Wl,--dynamic-list-cpp-typeinfo"
AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
],[
printf ("hello world\n");
])], HAVE_LD_BSYMBOLIC_FUNCTIONS=TRUE, [])
if test "z$HAVE_LD_BSYMBOLIC_FUNCTIONS" = "zTRUE"; then
AC_MSG_RESULT( found )
else
AC_MSG_RESULT( not found )
fi
LDFLAGS=$bsymbolic_functions_ldflags_save
fi
AC_SUBST(HAVE_LD_BSYMBOLIC_FUNCTIONS)
dnl ===================================================================
dnl Set the ENABLE_PCH variable. (Activate --enable-pch)
dnl ===================================================================
AC_MSG_CHECKING([whether to enable pch feature])
if test -n "$enable_pch" && test "$enable_pch" != "no"; then
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
ENABLE_PCH="TRUE"
AC_MSG_RESULT([yes])
dnl There is no PCH support in GCC versions prior to this
elif test "$GCC" = "yes" -a "$GCCVER" -gt "030400"; then
ENABLE_PCH="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_PCH=""
AC_MSG_WARN([Precompiled header not yet supported for your platform/compiler])
fi
else
ENABLE_PCH=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_PCH)
dnl ===================================================================
dnl Search all the common names for GNU make
dnl ===================================================================
AC_MSG_CHECKING([for GNU make])
for a in "$MAKE" $GNUMAKE make gmake gnumake; do
$a --version 2> /dev/null | grep GNU 2>&1 > /dev/null
if test $? -eq 0; then
GNUMAKE=$a
break
fi
done
AC_MSG_RESULT($GNUMAKE)
if test -z "$GNUMAKE"; then
AC_MSG_ERROR([not found. install GNU make.])
fi
AC_MSG_CHECKING([the GNU make version])
_make_version=`$GNUMAKE --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`;
_make_longver=`echo $_make_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
if test "$_make_longver" -ge "038100" ; then
AC_MSG_RESULT([$GNUMAKE $_make_version])
else
AC_MSG_ERROR([failed ($GNUMAKE version >= 3.81 needed])
fi
AC_SUBST(GNUMAKE)
dnl ===================================================================
dnl Search for a pre-installed dmake
dnl ===================================================================
AC_MSG_CHECKING([for dmake])
DMAKE="no"
# Override system dmake if --with-dmake-path or --with-dmake-url is used.
if test -z "$with_dmake_path" && test -z "$with_dmake_url"; then
AC_PATH_PROG(DMAKE, dmake, no)
IS_SYSTEM_DMAKE=NO
if test "$DMAKE" != "no"; then
AC_MSG_RESULT([using system dmake])
DMAKE_PATH="$DMAKE"
IS_SYSTEM_DMAKE=YES
fi
elif test -n "$with_dmake_path" ; then
# Did not find pre-installed dmake.
# Is it at a nonstandard location provided by --with-dmake-path ?
AC_MSG_NOTICE([looking for dmake at $DMAKE_PATH])
if test -x "$with_dmake_path" ; then
AC_MSG_RESULT([using user provided dmake])
DMAKE=$with_dmake_path
fi
fi
DMAKE_URL=
if test "$DMAKE" = "no"; then
AC_MSG_NOTICE([no system or user-provided dmake found])
# Check if a URL was supplied from which we can download the source and compile it.
if test -n "$with_dmake_url" ; then
# At this moment we can not verify the URL or the content that we want to download.
# Neither can we apply the test below for ruling out that it is the SunStudio dmake.
DMAKE_URL=$with_dmake_url
AC_MSG_RESULT([dmake will be downloaded and compiled in bootstrap])
DMAKE=
else
AC_MSG_ERROR([no URL for dmake source code specified, either. Use --with-dmake-url to supply an URL; run configure with the --help option for a list of possible URLs.])
BUILD_DMAKE=YES
fi
else
AC_MSG_CHECKING([whether the found dmake is the right dmake])
# we need to find out whether that dmake we found is "our" dmake
# or the dmake from Sun's SunStudio Compiler which is something
# different
# This test _should_ work because the one accepts -V (ours) and one
# (the other) not...
$DMAKE -V 2>/dev/null | grep -E 'dmake(.exe)? .* Version .*' >/dev/null
if test $? -eq 0; then
BUILD_DMAKE=NO
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([the dmake version])
DMAKE_VERSION=`$DMAKE -V | $AWK '$3 == "Version" {print $4}'`
if test "`echo $DMAKE_VERSION | cut -d'.' -f1`" -gt "4"; then
AC_MSG_RESULT([OK, >= 4.11])
elif test "`echo $DMAKE_VERSION | cut -d'.' -f1`" = "4" && \
test "`echo $DMAKE_VERSION | cut -d'.' -f2`" -ge "11"; then
AC_MSG_RESULT([OK, >= 4.11])
else
AC_MSG_ERROR([too old. >= 4.11 is needed])
DMAKE=no
fi
else
AC_MSG_WARN([no])
DMAKE=no
fi
fi
if test "$DMAKE" = "no"; then
AC_MSG_ERROR([please use --with-dmake-path or --with-dmake-url to specify dmake executable or source])
fi
AC_SUBST(DMAKE_URL)
AC_SUBST(DMAKE_PATH)
AC_SUBST(IS_SYSTEM_DMAKE)
dnl ===================================================================
dnl Search all the common names for GNU or BSD tar
dnl ===================================================================
AC_MSG_CHECKING([for GNU or compatible BSD tar])
for a in $GNUTAR gtar gnutar bsdtar tar; do
$a --version 2> /dev/null | egrep "GNU|libarchive" 2>&1 > /dev/null
if test $? -eq 0; then
GNUTAR=$a
break
fi
done
AC_MSG_RESULT($GNUTAR)
if test -z "$GNUTAR"; then
AC_MSG_ERROR([not found. install GNU tar.])
fi
AC_SUBST(GNUTAR)
dnl ===================================================================
dnl Test the solaris compiler version
dnl ===================================================================
if test "$_os" = "SunOS"; then
if test "$CC" = "cc"; then
AC_PATH_PROGS(_cc, cc)
COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"`
AC_MSG_CHECKING([the SunStudio C/C++ compiler version])
dnl cc -V outputs to standard error!!!!
_sunstudio_string=`$CC -V 2>&1 | grep '^cc' | sed -e 's/.* C //'`
_sunstudio_version=`echo $_sunstudio_string | $AWK '{ print $1 }'`
_sunstudio_major=`echo $_sunstudio_version | $AWK -F. '{ print $1 }'`
if test "$_sunstudio_major" != "5"; then
AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the SunStudio C/C++ compiler])
else
_sunstudio_minor=`echo $_sunstudio_version | $AWK -F. '{ if ($2 == 5) print "true"; else if ($2 == 7) print "true"; else if ($2 == 8) print "true"; else if ($2 == 9) print "true"; else print "false" }'`
if test "$_sunstudio_minor" = "false"; then
AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the SunStudio C/C++ compiler])
else
dnl compiler will do
AC_MSG_RESULT([checked])
fi
fi
fi
fi
if test "$GCC" = "yes"; then
AC_MSG_CHECKING( for --hash-style=both linker support )
hash_style_ldflags_save=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,--hash-style=both"
AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
],[
printf ("hello world\n");
])], HAVE_LD_HASH_STYLE=TRUE, HAVE_LD_HASH_STYLE=FALSE)
if test "z$HAVE_LD_HASH_STYLE" = "zTRUE"; then
AC_MSG_RESULT( found )
else
AC_MSG_RESULT( not found )
fi
LDFLAGS=$hash_style_ldflags_save
fi
AC_SUBST(HAVE_LD_HASH_STYLE)
dnl ===================================================================
dnl Test the Compaq compiler for OSF1
dnl ===================================================================
if test "$_os" = "OSF1"; then
if test "$CC" = "cc"; then
AC_PATH_PROGS(_cc, cc)
COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"`
AC_MSG_WARN([******* $_cc , $COMPATH])
AC_MSG_CHECKING([the Compaq C compiler version])
dnl cc -V outputs to standard error!!!!
_compaqc_version=`$CC -V 2>&1 | $AWK '{ print $3 }'`
_compaqc_major=`echo $_compaqc_version | $AWK -F. '{ print $1 }'`
if test "$_compaqc_major" != "T6"; then
AC_MSG_ERROR([found version "$_compaqc_version", use version 6 of the Compaq C compiler])
else
dnl compiler will do
AC_MSG_RESULT([checked])
fi
fi
fi
dnl ===================================================================
dnl Check whether there's a Perl version available.
dnl ===================================================================
if test -z "$with_perl_home"; then
AC_PATH_PROG(PERL, perl)
else
if test "$_os" = "WINNT"; then
with_perl_home=`cygpath -u "$with_perl_home"`
fi
_perl_path="$with_perl_home/bin/perl"
if test -x "$_perl_path"; then
PERL=$_perl_path
else
AC_MSG_ERROR([$_perl_path not found])
fi
fi
dnl ===================================================================
dnl Testing for Perl version 5 or greater.
dnl $] is the perl version variable, it is returned as an integer
dnl ===================================================================
if test "$PERL"; then
AC_MSG_CHECKING([the Perl version])
${PERL} -e "exit($]);"
_perl_version=$?
if test "$_perl_version" -lt 5; then
AC_MSG_ERROR([found Perl version "$_perl_version", use version 5 of Perl])
fi
AC_MSG_RESULT([checked (perl $_perl_version)])
else
AC_MSG_ERROR([Perl not found, install version 5 of Perl])
fi
AC_SUBST(PERL)
dnl ===================================================================
dnl Testing for required Perl modules
dnl The list of required Perl modules is documented here:
dnl http://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO#General_Build_Requirements
dnl ===================================================================
AC_MSG_CHECKING([for required Perl modules])
if `$PERL -e 'use Archive::Zip; use LWP::UserAgent; use XML::Parser;'>/dev/null 2>&1`; then
AC_MSG_RESULT([all modules found])
else
# Find out which modules are missing.
missing_perl_modules=
if ! `$PERL -e 'use Archive::Zip;'>/dev/null 2>&1`; then
missing_perl_modules=Archive::Zip
fi
if ! `$PERL -e 'use LWP::UserAgent;'>/dev/null 2>&1`; then
missing_perl_modules="$missing_perl_modules LWP::UserAgent"
fi
if ! `$PERL -e 'use XML::Parser;'>/dev/null 2>&1`; then
missing_perl_modules="$missing_perl_modules XML::Parser"
fi
AC_MSG_ERROR([
The missing Perl modules are: $missing_perl_modules
Install them as superuser/administrator with "cpan -i $missing_perl_modules"])
fi
dnl ===================================================================
dnl Check which Microsoft C/C++ or MinGW compiler is used for WINNT
dnl ===================================================================
if test "$_os" = "WINNT"; then
if test "$WITH_MINGWIN" != "yes"; then
AC_MSG_CHECKING([for friendly registry keys])
# VS.Net 2003, VS.Net 2005
if test -z "$with_cl_home"; then
vctest=`./oowintool --msvc-productdir`;
if test -x "$vctest/bin/cl.exe"; then
with_cl_home=$vctest;
fi
else
with_cl_home=`cygpath -u "$with_cl_home"`
fi
AC_MSG_RESULT([done])
dnl ===========================================================
dnl Check for mspdb71.dll/mspdb80.dll
dnl ===========================================================
dnl .NET 2003/5/8 Compiler
if test -n "$with_mspdb_path";then
with_mspdb_path=`cygpath -u "$with_mspdb_path"`
fi
if test -e "$with_mspdb_path/mspdb71.dll" -o -e "$with_mspdb_path/mspdb80.dll"; then
MSPDB_PATH="$with_mspdb_path"
fi
dnl .NET 2003 case
if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb71.dll"; then
MSPDB_PATH="$with_cl_home/../Common7/IDE"
fi
dnl .NET 2005/2008 case
if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb80.dll"; then
MSPDB_PATH="$with_cl_home/../Common7/IDE"
fi
dnl Windows SDK 6.0 case
if test -z "$MSPDB_PATH" -a -e "$with_cl_home/bin/mspdb80.dll"; then
MSPDB_PATH="$with_cl_home/bin"
fi
if test -z "$MSPDB_PATH";then
dnl AC_PATH_PROG only checks if MSPDB_PATH is still empty
AC_PATH_PROG(MSPDB_PATH, mspdb80.dll)
AC_PATH_PROG(MSPDB_PATH, mspdb71.dll)
MSPDB_PATH=`dirname "$MSPDB_PATH"`
fi
if test -z "$MSPDB_PATH"; then
AC_MSG_ERROR([You need a mspdb71.dll/mspdb80.dll, make sure it's in the path or use --with-mspdb-path])
fi
MSPDB_PATH=`cygpath -d "$MSPDB_PATH"`
MSPDB_PATH=`cygpath -u "$MSPDB_PATH"`
dnl The path needs to be added before cl is called
PATH="$MSPDB_PATH:$PATH"
AC_MSG_CHECKING([the Microsoft C/C++ Compiler])
if test -x "$with_cl_home/bin/cl.exe"; then
CC="$with_cl_home/bin/cl.exe"
else
AC_PATH_PROG(CC, cl.exe)
fi
if test -e "$CC"; then
# This gives us a posix path with 8.3 filename restrictions
CC=`cygpath -d "$CC"`
CC=`cygpath -u "$CC"`
# Remove /cl.exe from CC case insensitive
AC_MSG_RESULT([found ($CC)])
COMPATH=`echo $CC | $SED 's@\/[[Bb]][[Ii]][[Nn]]\/[[cC]][[lL]]\.[[eE]][[xX]][[eE]]@@'`
export INCLUDE=`cygpath -d "$COMPATH/Include"`
dnl Check which Microsoft C/C++ compiler is found
AC_MSG_CHECKING([the Version of Microsoft C/C++ Compiler])
dnl The following find microsoft, matches nn.nn.nnnn then pulls numbers out.
CCTXTVER=`$CC 2>&1 | head -n1`
CCNUMVER=`echo $CCTXTVER | $AWK "/Microsoft/ && /..\\...\\...../ {
x = match( \\\$0, /..\\...\\...../ )
CCversion = substr( \\\$0, RSTART, RLENGTH)
tokencount = split (CCversion,vertoken,\".\")
for ( i = 1 ; i <= tokencount ; i++ ) {
printf (\"%04d\",vertoken[[i]] )
}
}"`
AC_MSG_RESULT([found Compiler version $CCNUMVER in \"$CCTXTVER\"])
if test "$CCNUMVER" -ge "001500000000"; then
COMEX=12
MSVSVER=2008
AC_MSG_RESULT([found .NET 2008 / VS 9.0.])
else
AC_MSG_ERROR([Compiler too old. Use Microsoft C/C++ .NET 2008.])
fi
else
AC_MSG_ERROR([Microsoft C/C++ Compiler not found. Use --with-cl-home or set path to cl.exe.])
fi
else
AC_MSG_CHECKING([the Mingwin32 C++ Compiler])
if test `$CC -dumpmachine | $SED -e 's/^.*-//'` = "mingw32"; then
AC_MSG_RESULT([found.])
if $CC -dumpspecs | grep -q "mno-cygwin"; then
USE_MINGW="cygwin"
else
USE_MINGW="pure-mingw"
fi
else
AC_MSG_ERROR([Mingwin32 C++ Compiler not found.])
fi
fi
fi
AC_SUBST(COMEX)
AC_SUBST(MSPDB_PATH)
AC_SUBST(USE_MINGW)
dnl ===================================================================
dnl .NET needs special treatment
dnl ===================================================================
if test "$_os" = "WINNT"; then
if test "$WITH_MINGWIN" = "yes" || test "$COMEX" -ge "10"; then
dnl Check midl.exe
AC_PATH_PROG(MIDL_PATH, midl.exe)
if test -n "$MIDL_PATH";then
MIDL_PATH=`dirname "$MIDL_PATH"`
fi
if test -n "$with_midl_path";then
with_midl_path=`cygpath -u "$with_midl_path"`
fi
if test -x "$with_midl_path/midl.exe"; then
MIDL_PATH="$with_midl_path"
fi
if test -z "$MIDL_PATH" -a -e "$with_cl_home/../Common7/Tools/Bin/midl.exe"; then
MIDL_PATH="$with_cl_home/../Common7/Tools/Bin"
fi
if test -z "$MIDL_PATH" ; then
vstest=`./oowintool --msvs-productdir`;
if test -x "$vstest/Common7/Tools/Bin/midl.exe" ; then
MIDL_PATH="$vstest/Common7/Tools/Bin"
fi
fi
if test -z "$MIDL_PATH" ; then
psdktest=`./oowintool --psdk-home`
if test -x "$psdktest/Bin/midl.exe" ; then
MIDL_PATH="$psdktest/Bin"
fi
fi
if test ! -x "$MIDL_PATH/midl.exe"; then
AC_MSG_ERROR([midl.exe not found. Make sure it's in the path or use --with-midl-path])
fi
# Convert to posix path with 8.3 filename restrictions ( No spaces )
MIDL_PATH=`cygpath -d "$MIDL_PATH"`
MIDL_PATH=`cygpath -u "$MIDL_PATH"`
dnl Check csc.exe
AC_PATH_PROG(CSC_PATH, csc.exe)
if test -n "$CSC_PATH";then
CSC_PATH=`dirname "$CSC_PATH"`
fi
if test -n "$with_csc_path";then
with_csc_path=`cygpath -u "$with_csc_path"`
fi
if test -x "$with_csc_path/csc.exe"; then
CSC_PATH="$with_csc_path"
else
csctest=`./oowintool --csc-compilerdir`;
if test -x "$csctest/csc.exe"; then
CSC_PATH="$csctest"
fi
fi
if test ! -x "$CSC_PATH/csc.exe"; then
AC_MSG_ERROR([csc.exe not found. Make sure it's in the path or use --with-csc-path])
fi
# Convert to posix path with 8.3 filename restrictions ( No spaces )
CSC_PATH=`cygpath -d "$CSC_PATH"`
CSC_PATH=`cygpath -u "$CSC_PATH"`
dnl Check mscoree.lib / .NET Frameworks dir
dnl For VS2003/2005 $with_frame_home has to point to the directory with lib/mscoree.lib.
AC_MSG_CHECKING(.NET Framework)
if test -n "$with_frame_home"; then
with_frame_home=`cygpath -u "$with_frame_home"`
fi
if test -f "$with_frame_home/lib/mscoree.lib"; then
FRAME_HOME="$with_frame_home"
fi
if test -z "$FRAME_HOME" -a -e "$with_cl_home/../SDK/v1.1/lib/mscoree.lib"; then
FRAME_HOME="$with_cl_home/../SDK/v1.1"
fi
if test -z "$FRAME_HOME" ; then
frametest=`./oowintool --dotnetsdk-dir`
if test -f "$frametest/lib/mscoree.lib"; then
FRAME_HOME="$frametest"
else
frametest=`./oowintool --psdk-home`
if test -f "$frametest/lib/mscoree.lib"; then
FRAME_HOME="$frametest"
fi
fi
fi
if test ! -f "$FRAME_HOME/lib/mscoree.lib"; then
AC_MSG_ERROR([mscoree.lib (.NET Framework) not found. Make sure you use --with-frame-home])
fi
AC_MSG_RESULT(found)
# Convert to posix path with 8.3 filename restrictions ( No spaces )
FRAME_HOME=`cygpath -d "$FRAME_HOME"`
FRAME_HOME=`cygpath -u "$FRAME_HOME"`
fi
AC_SUBST(MIDL_PATH)
AC_SUBST(CSC_PATH)
AC_SUBST(FRAME_HOME)
fi
dnl ===================================================================
dnl Check if stdc headers are available excluding windows.
dnl ===================================================================
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_HEADER_STDC
fi
dnl ===================================================================
dnl Find pre-processors.
dnl ===================================================================
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_PROG_CXXCPP
dnl Check whether there's a C pre-processor.
dnl ===================================================================
dnl When using SunStudio compiler, there is a bug with the cc
dnl preprocessor, so use CC preprocessor as the cc preprocessor
dnl See Issuezilla #445.
dnl ===================================================================
if test "$_os" = "SunOS"; then
CPP=$CXXCPP
else
AC_PROG_CPP
fi
fi
AC_CHECK_SIZEOF(long)
SIZEOF_LONG=$ac_cv_sizeof_long
AC_SUBST(SIZEOF_LONG)
AC_C_BIGENDIAN
WORDS_BIGENDIAN=$ac_cv_c_bigendian
AC_SUBST(WORDS_BIGENDIAN)
dnl Check for large file support
AC_SYS_LARGEFILE
if test -n "$ac_cv_sys_file_offset_bits"; then
LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits"
fi
if test -n "$ac_cv_sys_large_files" && test "$ac_cv_sys_large_files" != "no"; then
LFS_CFLAGS="$LFS_CFLAGS -D_LARGE_FILES"
fi
AC_SUBST(LFS_CFLAGS)
dnl ===================================================================
dnl Check if valgrind.h is available
dnl ===================================================================
if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then
dnl Test $prefix (currently only testing for /usr and /usr/local)
dnl so that VALGRIND_CFLAGS = -I$prefix/include/valgrind
VALGRIND_CFLAGS=""
prev_cppflags=$CPPFLAGS
if test -z "$VALGRIND_CFLAGS"; then
CPPFLAGS="-I/usr/include/valgrind"
AC_CHECK_HEADER([valgrind.h], [VALGRIND_CFLAGS=$CPPFLAGS], [unset ac_cv_header_valgrind_h])
fi
if test -z "$VALGRIND_CFLAGS"; then
CPPFLAGS="-I/usr/local/include/valgrind"
AC_CHECK_HEADER([valgrind.h], [VALGRIND_CFLAGS=$CPPFLAGS], [])
fi
if test -n "$VALGRIND_CFLAGS"; then
CPPFLAGS=$VALGRIND_CFLAGS
AC_CHECK_HEADER([memcheck.h], [], [VALGRIND_CFLAGS=""])
fi
CPPFLAGS=$prev_cppflags
fi
AC_SUBST([VALGRIND_CFLAGS])
dnl ===================================================================
dnl Check if cups/cups.h is available
dnl ===================================================================
if test "$test_cups" = "yes" -a "$ENABLE_CUPS" = "TRUE" ; then
AC_CHECK_HEADER(cups/cups.h, [],
[AC_MSG_ERROR([cups/cups.h could not be found. libcupsys2-dev or cups???-devel missing?])], [])
fi
dnl ===================================================================
dnl Check if PAM/pam_appl.h is available on Linux or FreeBSD
dnl ===================================================================
if test "$_os" = "Linux" -o "$_os" = "FreeBSD" -o "$_os" = "GNU"; then
AC_MSG_CHECKING([whether to enable pam support])
if test -z "$enable_pam" || test "$enable_pam" != "no"; then
AC_MSG_RESULT([yes])
PAM=YES
AC_CHECK_HEADER(security/pam_appl.h, [],
[AC_MSG_ERROR([pam_appl.h could not be found. libpam-dev or pam-devel missing?])], [])
AC_MSG_CHECKING([whether to link to libpam])
if test -n "$enable_pam_link" -a "$enable_pam_link" != "no"; then
AC_MSG_RESULT([yes])
PAM_LINK=YES
AC_CHECK_LIB(pam, pam_start, [],
[AC_MSG_ERROR(libpam not found or functional)], [])
else
AC_MSG_RESULT([no, dynamically open it])
PAM_LINK=NO
fi
else
AC_MSG_RESULT([no])
PAM=NO
PAM_LINK=NO
dnl check getspnam_r for needed args (4 or 5)
AX_FUNC_WHICH_GETSPNAM_R
fi
fi
AC_SUBST(PAM)
AC_SUBST(NEW_SHADOW_API)
AC_SUBST(PAM_LINK)
if test "$_os" = "Linux"; then
AC_MSG_CHECKING([whether to link to libcrypt])
if test -n "$enable_crypt_link" -a "$enable_crypt_link" != "no"; then
AC_MSG_RESULT([yes])
CRYPT_LINK=YES
AC_CHECK_LIB(crypt, crypt, [],
[AC_MSG_ERROR(libcrypt not found or functional)], [])
else
AC_MSG_RESULT([no, dynamically open it])
CRYPT_LINK=NO
fi
fi
AC_SUBST(CRYPT_LINK)
dnl ===================================================================
dnl Testing for c++ compiler and version...
dnl ===================================================================
if test -n "$with_gcc_home"; then
if test -z "$CXX"; then
CXX="$with_gcc_home/bin/g++"
fi
fi
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
if test -e "$CC"; then
CXX="$CC"
fi
fi
dnl Autoconf 2.53 can do this test for cl.exe, 2.13 can't!
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_PROG_CXX
fi
dnl check if we are using a buggy version of g++ (currently 3.4.0, 3.4.1 and trunk)
if test "$GXX" = "yes"; then
AC_MSG_CHECKING([the GNU C++ compiler version])
_gpp_version=`$CXX -dumpversion`
_gpp_majmin=`echo $_gpp_version | $AWK -F. '{ print \$1*100+\$2 }'`
AC_MSG_RESULT([checked (g++ $_gpp_version)])
if test "$_gpp_majmin" = "304"; then
AC_MSG_CHECKING([whether $CXX has the enum bug])
AC_TRY_RUN([
extern "C" void abort (void);
extern "C" void exit (int status);
enum E { E0, E1, E2, E3, E4, E5 };
void
test (enum E e)
{
if (e == E2 || e == E3 || e == E1)
exit (1);
}
int
main (void)
{
test (E4);
test (E5);
test (E0);
return 0;
}
],[AC_MSG_ERROR([your version of the GNU C++ compile has a bug which prevents Apache OpenOffice from being compiled correctly - please check http://gcc.gnu.org/ml/gcc-patches/2004-07/msg00968.html for details.])], [AC_MSG_RESULT([no])])
fi
fi
dnl ===================================================================
dnl Set the gcc/gxx include directories
dnl ===================================================================
# Removed the special FreeBSD treatment. The problem was that with_gxx_include_path
# often contains an i386 which is expanded as a macro.
if test "$GXX" = "yes"; then
AC_MSG_CHECKING([for g++ include path])
if test -z "$with_gxx_include_path"; then
with_gxx_include_path=`echo "#include <cstring>" | $CXX -E -xc++ - | $SED -n '/.*1*"\(.*\)\/cstring".*/s//\1/p' | head -n 1`
if test "$with_gxx_include_path" = "/usr/libexec/(null)/include"; then
with_gxx_include_path="/usr/include"
fi
if test "$WITH_MINGWIN" = "yes"; then
with_gxx_include_path=`cygpath -d "$with_gxx_include_path"`
with_gxx_include_path=`cygpath -u "$with_gxx_include_path"`
fi
if echo $with_gxx_include_path | grep -q linux; then
# workaround for Mandriva - issue 100049
with_gxx_include_path=`cd $with_gxx_include_path && pwd`
fi
fi
fi
dnl This is the original code...
dnl with_gxx_include_path=`$CXX -print-search-dirs | grep instal |$AWK '{ print \$2 }'`/include
if test -z "$with_gxx_include_path"; then
with_gxx_include_path="NO_GXX_INCLUDE"
AC_MSG_RESULT([no g++ includes])
else
AC_MSG_RESULT([$with_gxx_include_path])
fi
GXX_INCLUDE_PATH="$with_gxx_include_path"
AC_SUBST(GXX_INCLUDE_PATH)
dnl ===================================================================
dnl Set the mingw runtime library include directories
dnl ===================================================================
if test "$WITH_MINGWIN" = "yes"; then
AC_MSG_CHECKING([for mingwin runtime include path])
cat >conftest.$ac_ext <<_ACEOF
#include <stddef.h>
#include <bits/c++config.h>
_ACEOF
_mingw_lib_include_path=`$CXX -E -xc++ conftest.$ac_ext | $SED -n -e '/.*1*"\(.*\)\/stddef.h".*/s//\1/p' -e '/.*1*"\(.*\)\/bits\/c++config.h".*/s//\1/p' | sort -u | xargs echo`
rm conftest.$ac_ext
if test -n "$_mingw_lib_include_path"; then
_temp=""
for a in $_mingw_lib_include_path
do
a=`cygpath -d "$a"`
_temp="$_temp "`cygpath -u "$a"`
done
_mingw_lib_include_path=$_temp
fi
if test -z "$_mingw_lib_include_path"; then
_mingw_lib_include_path="NO_LIB_INCLUDE"
AC_MSG_RESULT([no mingwin runtime includes])
else
AC_MSG_RESULT([$_mingw_lib_include_path])
fi
MINGW_LIB_INCLUDE_PATH="$_mingw_lib_include_path"
AC_SUBST(MINGW_LIB_INCLUDE_PATH)
dnl mingw gcc 4.4.0 needs backward in include path to use hash_set/hash_map
AC_MSG_CHECKING([for mingwin c++ backward include path])
cat >conftest.$ac_ext <<_ACEOF
#include <hash_set>
_ACEOF
_mingw_backward_include_path=`$CXX -E -xc++ -Wno-deprecated conftest.$ac_ext 2>&5| $SED -n -e '/.*1*"\(.*\)\/hash_set".*/s//\1/p' | sort -u | xargs echo`
rm conftest.$ac_ext
if test -n "$_mingw_backward_include_path"; then
_mingw_backward_include_path=`cygpath -d $_mingw_backward_include_path`
_mingw_backward_include_path=`cygpath -u $_mingw_backward_include_path`
AC_MSG_RESULT([$_mingw_backward_include_path])
else
_mingw_backward_include_path="NO_BACKWARD_INCLUDE"
AC_MSG_RESULT([no mingwin c++ backward includes])
fi
MINGW_BACKWARD_INCLUDE_PATH="$_mingw_backward_include_path"
AC_SUBST(MINGW_BACKWARD_INCLUDE_PATH)
mingw_crtbegin=`$CC -print-file-name=crtbegin.o`
MINGW_CLIB_DIR=`dirname $mingw_crtbegin`
AC_MSG_CHECKING([whether to use dynamic libgcc])
if test -e "$MINGW_CLIB_DIR/libgcc_s.a"; then
AC_MSG_CHECKING([dynamic libgcc name])
MINGW_GCCDLL_pattern=`nm $MINGW_CLIB_DIR/libgcc_s.a | sed -ne 's@.* _libgcc\(.*\)_dll_iname@libgcc\1.dll@p' | uniq | sed -e 's@_@?@g'`
MINGW_GCCDLL=`cd $COMPATH/bin && ls $MINGW_GCCDLL_pattern 2>/dev/null`
if test -n "$MINGW_GCCDLL"; then
MINGW_SHARED_GCCLIB=YES
AC_MSG_RESULT([use $MINGW_GCCDLL])
else
AC_MSG_RESULT([no])
fi
else
AC_MSG_RESULT([no])
fi
if test -e "$MINGW_CLIB_DIR/libgcc_eh.a"; then
MINGW_GCCLIB_EH=YES
fi
AC_MSG_CHECKING([whether to use dynamic libstdc++])
MINGW_SHARED_LIBSTDCPP=
if test -e "$MINGW_CLIB_DIR/libstdc++_s.a" ; then
MINGW_SHARED_LIBSTDCPP=stdc++_s
fi
if test -e "$MINGW_CLIB_DIR/libstdc++.dll.a" ; then
MINGW_SHARED_LIBSTDCPP=stdc++.dll
fi
if test -n "$MINGW_SHARED_LIBSTDCPP" ; then
AC_MSG_CHECKING([dynamic libstdc++ name])
MINGW_GXXDLL_pattern=`nm $MINGW_CLIB_DIR/lib$MINGW_SHARED_LIBSTDCPP.a | sed -ne 's@.* _libstdc__\(.*\)_dll_iname@libstdc++\1.dll@p' | uniq | sed -e 's@_@?@g'`
MINGW_GXXDLL=`cd $COMPATH/bin && ls $MINGW_GXXDLL_pattern 2>/dev/null`
if test -n "$MINGW_GXXDLL"; then
MINGW_SHARED_LIBSTDCPP=-l$MINGW_SHARED_LIBSTDCPP
MINGW_SHARED_GXXLIB=YES
AC_MSG_RESULT([use $MINGW_GXXDLL])
else
MINGW_SHARED_LIBSTDCPP=
AC_MSG_RESULT([no])
fi
else
AC_MSG_RESULT([no])
fi
MINGW_CLIB_DIR=`cygpath $MINGW_CLIB_DIR`
AC_SUBST(MINGW_CLIB_DIR)
AC_SUBST(MINGW_SHARED_GCCLIB)
AC_SUBST(MINGW_GCCLIB_EH)
AC_SUBST(MINGW_SHARED_GXXLIB)
AC_SUBST(MINGW_SHARED_LIBSTDCPP)
AC_SUBST(MINGW_GCCDLL)
AC_SUBST(MINGW_GXXDLL)
fi
dnl ===================================================================
dnl Extra checking for the SUN OS compiler
dnl ===================================================================
if test "$_os" = "SunOS"; then
dnl SunStudio C++ compiler packaged with SunStudio C compiler
if test "$CC" = "cc"; then
AC_MSG_CHECKING([SunStudio C++ Compiler])
if test "$CXX" != "CC"; then
AC_MSG_WARN([SunStudio C++ was not found])
echo "SunStudio C++ was not found" >> warn
else
AC_MSG_RESULT([checked])
fi
fi
fi
dnl ===================================================================
dnl Extra checking for the OSF compiler
dnl ===================================================================
if test "$_os" = "OSF1"; then
AC_MSG_CHECKING([Compaq C++ compiler version])
dnl cxx -V outputs to standard error!!!!
_compaqcxx_version=`$CXX -V 2>&1 | $AWK '{ print $3 }'`
_compaqcxx_major=`echo $_compaqcxx_version | $AWK -F. '{ print $1 }'`
if test "$_compaqcxx_major" != "V6"; then
AC_MSG_WARN([found version "$_compaqc_version", use version 6 of the Compaq C++ compiler])
echo "found version $_compaqc_version, use version 6 of the Compaq C++ compiler" >> warn
else
dnl compiler will do
AC_MSG_RESULT([checked])
fi
fi
dnl *************************************************************
dnl Testing for exception handling - dwarf2 or sjlj exceptions...
dnl *************************************************************
AC_MSG_CHECKING([exception type])
AC_LANG_PUSH([C++])
if test "$WITH_MINGWIN" = "yes"; then
AC_TRY_LINK(
[#include <iostream>
extern "C" void _Unwind_SjLj_RaiseException(void) __attribute__ ((__noreturn__));
],
[_Unwind_SjLj_RaiseException() ],
[exceptions_type="sjlj"],
[exceptions_type="dwarf2"]
)
fi
AC_MSG_RESULT($exceptions_type)
AC_LANG_POP([C++])
EXCEPTIONS="$exceptions_type"
AC_SUBST(EXCEPTIONS)
dnl **************************************************************
dnl Testing for required Solaris and SunStudio compiler patches...
dnl **************************************************************
dnl Check whether the OS is SunOS.
if test "$_os" = "SunOS"; then
_temp=`showrev -p | $AWK -F" " '{ print $2 }'`
if test "$_os_release" = "7"; then
dnl ***************
dnl patch 106327-06
dnl ***************
AC_MSG_CHECKING([for patch 106327-06 or greater])
_patch=`echo $_temp | $AWK '/106327-06/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "106327"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "6"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 106327-06 not found, please install compiler patch 106327-06 or greater])
echo "patch 106327-06 not found, please install compiler patch 106327-06 or greater" >> warn
fi
dnl ***************
dnl patch 106950-11
dnl ***************
AC_MSG_CHECKING([for patch 106950-11 or greater])
_patch=`echo $_temp | $AWK '/106950-11/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "106950"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "11"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 106950-11 not found, please install linker patch 106950-11 or greater])
echo "patch 106950-11 not found, please install linker patch 106950-11 or greater" >> warn
fi
else
if test "$_os_release" = "6"; then
dnl ***************
dnl patch 105591-09
dnl ***************
AC_MSG_CHECKING([for patch 105591-09 or greater])
_patch=`echo $_temp | $AWK '/105591-09/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "105591"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "9"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 105591-09 not found, please install compiler patch 105591-09 or greater])
echo "patch 105591-09 not found, please install compiler patch 105591-09 or greater" >> warn
fi
dnl ***************
dnl patch 107733-08
dnl ***************
AC_MSG_CHECKING([for patch 107733-08 or greater])
_patch=`echo $_temp | $AWK '/107733-08/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "107733"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "8"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 107733-06 not found, please install linker patch 107733-08 or greater])
echo "patch 107733-06 not found, please install linker patch 107733-08 or greater" >> warn
fi
fi
fi
fi
dnl ===================================================================
dnl Checks for what the default STL should be
dnl ===================================================================
AC_MSG_CHECKING([what the default STL should be])
DEFAULT_TO_STLPORT="no"
if test "$WITH_STLPORT" != "no"; then
AC_MSG_ERROR([Option --with-stlport is no longer available.])
else
USE_SYSTEM_STL="YES"
fi
AC_SUBST(USE_SYSTEM_STL)
dnl ===================================================================
dnl visibility feature
dnl ===================================================================
if test "$GCC" = "yes"; then
AC_MSG_CHECKING([whether $CC supports -fvisibility=hidden])
save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -fvisibility=hidden"
AC_TRY_LINK([], [ return 0; ], [ HAVE_GCC_VISIBILITY_FEATURE=TRUE ], [])
CFLAGS=$save_CFLAGS
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
fi
# ===================================================================
# use --ccache-skip?
# ===================================================================
dnl used to escape compiler options for ccache that otherwise prevent
dnl caching of the results (like "-x objective-c++" for Mac)
AC_MSG_CHECKING([whether we are allowed and able to use --ccache-skip])
if test "$_os" != "Darwin" ; then
AC_MSG_RESULT([only used on Mac currently, skipping])
elif test "$enable_ccache_skip" = "no" ; then
AC_MSG_RESULT([no - diabled explicitly])
elif test "$enable_ccache_skip" = "yes" ; then
AC_MSG_RESULT([yes - enabled explicitly, skipping checks])
AC_SUBST([USE_CCACHE], [YES])
elif test "$enable_ccache_skip" = "auto" ; then
# checking for ccache presence/version
AC_MSG_RESULT([probing...])
AC_PATH_PROG([CCACHE],[ccache],[not_found])
if test "$CCACHE" = "not_found" ; then
AC_MSG_NOTICE([not enabling --ccache-skip (ccache not found)])
else
# check ccache version
AC_MSG_CHECKING([whether version of ccache is suitable])
CCACHE_VERSION=`"$CCACHE" -V | "$AWK" '/^ccache version/{print $3}'`
if test "$CCACHE_VERSION" = "2.4_OOo"; then
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([whether ccache is actually used for the build])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS --ccache-skip -O2"
dnl an empty program will do, we're checking the compiler flags
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],
[use_ccache=yes], [use_ccache=no])
if test $use_ccache = yes ; then
AC_MSG_RESULT([yes, will enable --ccache-skip])
AC_SUBST([USE_CCACHE], [YES])
else
AC_MSG_RESULT([no, will not enable --ccache-skip])
fi
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
else
AC_MSG_RESULT([no])
AC_MSG_NOTICE([ccache version $CCACHE_VERSION not accepted. See description for --enable-ccache-skip])
fi
fi
else
AC_MSG_ERROR([invalid option to --enable-ccache-skip. Valid values are "auto", "yes" and "no"])
fi
dnl ===================================================================
dnl system stl sanity tests
dnl ===================================================================
if false ; then # TODO: update TR1 compliant STLs
if test "$USE_SYSTEM_STL" = "YES"; then
AC_MSG_CHECKING([system stl sanity])
AC_LANG_PUSH([C++])
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_CHECKING([if STL headers are visibility safe])
AC_EGREP_HEADER(visibility push, string, stlvisok=yes, stlvisok=no)
AC_MSG_RESULT([$stlvisok])
if test "$stlvisok" = "no"; then
AC_MSG_WARN([Your gcc STL headers are not visibility safe. Disabling visibility])
echo "Your gcc STL headers are not visibility safe. Disabling visibility" >> warn
unset HAVE_GCC_VISIBILITY_FEATURE
fi
fi
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
sharedlink_ldflags_save=$LDFLAGS
LDFLAGS="$LDFLAGS -fvisibility-inlines-hidden -fpic -shared"
AC_MSG_CHECKING([if gcc is -fvisibility-inlines-hidden safe with STL headers])
AC_TRY_LINK([#include <sstream>
using namespace std;
],[istringstream strm( "test" ); return 0;],
$EGREP -q unresolvable conftest.err;
if test $? -eq 0; then gccvisok=no; else gccvisok=yes; fi,
gccvisok=no)
AC_MSG_RESULT([$gccvisok])
if test "$gccvisok" = "no"; then
AC_MSG_WARN([Your gcc is not -fvisibility-inlines-hidden safe. Disabling visibility])
echo "Your gcc is not -fvisibility-inlines-hidden safe. Disabling visibility" >> warn
unset HAVE_GCC_VISIBILITY_FEATURE
fi
LDFLAGS=$sharedlink_ldflags_save
fi
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_CHECKING([if gcc has a visibility bug with class-level attributes (GCC bug 26905)])
cat >visibility.cxx <<_ACEOF
#pragma GCC visibility push(hidden)
struct __attribute__ ((visibility ("default"))) TestStruct {
static void Init();
};
__attribute__ ((visibility ("default"))) void TestFunc() {
TestStruct::Init();
}
_ACEOF
if ! $CXX $CXXFLAGS $CPPFLAGS -fpic -S visibility.cxx 2>/dev/null > /dev/null; then
gccvisbroken=yes
else
case "$build_cpu" in
i?86|x86_64)
if $EGREP -q '@PLT' visibility.s; then
gccvisbroken=no
else
gccvisbroken=yes
fi
;;
*)
gccvisbroken=no
;;
esac
fi
rm -f visibility.s visibility.cxx
AC_MSG_RESULT([$gccvisbroken])
if test "$gccvisbroken" = "yes"; then
AC_MSG_WARN([Your gcc is not -fvisibility=hidden safe. Disabling visibility])
echo "Your gcc is not -fvisibility=hidden safe. Disabling visibility" >> warn
unset HAVE_GCC_VISIBILITY_FEATURE
fi
fi
AC_LANG_POP([C++])
fi
fi # endof TODO: update TR1 compliant STLs
AC_SUBST(HAVE_GCC_VISIBILITY_FEATURE)
dnl ===================================================================
dnl allocator
dnl ===================================================================
AC_MSG_CHECKING([which memory allocator to use])
if test "$with_alloc" = "system"; then
AC_MSG_RESULT([system])
ALLOC="SYS_ALLOC";
AC_CHECK_FUNCS([malloc realloc calloc free])
fi
if test "$with_alloc" = "tcmalloc"; then
AC_MSG_RESULT(tcmalloc)
if ! echo $build_cpu | grep -E 'i[[3456]]86' 2>/dev/null >/dev/null; then
AC_MSG_ERROR([tcmalloc only available/usable on ix86])
fi
AC_CHECK_LIB(tcmalloc, malloc, [],
[AC_MSG_ERROR(tcmalloc not found or functional. Install the Google Profiling Tools)], [])
ALLOC="TCMALLOC";
fi
if test "$with_alloc" = "jemalloc"; then
if test "$_os" != "FreeBSD" -o "$_os" != "NetBSD"; then
AC_MSG_RESULT(jemalloc)
save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -pthread"
AC_CHECK_LIB(jemalloc, malloc, [],
[AC_MSG_ERROR(jemalloc not found or functional. Install the jemalloc allocator.)], [])
ALLOC="JEMALLOC";
CFLAGS=$save_CFLAGS
else
AC_MSG_RESULT([system])
ALLOC="SYS_ALLOC";
AC_CHECK_FUNCS([malloc realloc calloc free])
fi
fi
if test "$with_alloc" = "internal" -o -z "$with_alloc"; then
AC_MSG_RESULT([internal])
fi
AC_SUBST(ALLOC)
dnl ===================================================================
dnl Custom build version
dnl ===================================================================
AC_MSG_CHECKING([whether to add custom build version])
if test "z$with_build_version" != "z"; then
BUILD_VER_STRING=$with_build_version
AC_MSG_RESULT([yes, $BUILD_VER_STRING])
else
BUILD_VER_STRING=
AC_MSG_RESULT([no])
fi
AC_SUBST(BUILD_VER_STRING)
dnl ===================================================================
dnl Java support enable
dnl ===================================================================
AC_MSG_CHECKING([whether to build with Java support])
if test "$WITH_JAVA" != "no"; then
AC_MSG_RESULT([yes])
SOLAR_JAVA="TRUE"
else
AC_MSG_RESULT([no])
SOLAR_JAVA=""
AC_MSG_WARN([building without java will mean some features will not be available])
echo "building without java will mean some features will not be available" >>warn
fi
AC_SUBST(SOLAR_JAVA)
if test "$_os" = "Linux" && test "$build_cpu" = "powerpc"; then
# IBMs JDK needs this...
JITC_PROCESSOR_TYPE=6
export JITC_PROCESSOR_TYPE
fi
if test "$_os" = "WINNT"; then
if test -z "$with_jdk_home"; then
_jdk_home=`./oowintool --jdk-home`
if test -d "$_jdk_home"; then
with_jdk_home="$_jdk_home"
fi
else
with_jdk_home=`cygpath -u "$with_jdk_home"`
fi
fi
dnl ===================================================================
dnl Checks for java
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
JAVA_HOME=; export JAVA_HOME
if test -z "$with_jdk_home"; then
AC_PATH_PROG(JAVAINTERPRETER, $WITH_JAVA)
else
_java_path="$with_jdk_home/bin/$WITH_JAVA"
dnl Check if there is a java interpreter at all.
if test -x "$_java_path"; then
JAVAINTERPRETER=$_java_path
else
AC_MSG_ERROR([$_java_path not found, please use --with-jdk-home])
fi
fi
if test "$_os" = "WINNT"; then
if test x`echo "$JAVAINTERPRETER" | grep -i '\.exe$'` = x; then
JAVAINTERPRETER="${JAVAINTERPRETER}.exe"
fi
JAVAINTERPRETER=`cygpath -d "$JAVAINTERPRETER"`
JAVAINTERPRETER=`cygpath -u "$JAVAINTERPRETER"`
elif test "$_os" = "Darwin"; then
JAVAIFLAGS=""
fi
fi
dnl ===================================================================
dnl Checks for JDK.
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
_gij_longver=0
AC_MSG_CHECKING([the installed JDK])
if test -n "$JAVAINTERPRETER"; then
dnl java -version sends output to stderr!
if test `$JAVAINTERPRETER -version 2>&1 | grep -c "Kaffe"` -gt 0; then
AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.in])
# dnl Kaffe specific tests
# KAFFE_VER=`$JAVAINTERPRETER -version 2>&1 | $EGREP " Version:" | $SED -r "s/.* Version: ([[0-9\.]]*).*/\1/"`
# if test -z "$KAFFE_VER"; then
# AC_MSG_ERROR([looks like Kaffe but version detection failed])
# fi
# _kaffe_ver=`echo "$KAFFE_VER" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
# if test "$_kaffe_ver" -lt 10100; then
# AC_MSG_ERROR([Kaffe is too old ($KAFFE_VER - $_kaffe_ver), you need at least 1.1.0])
# fi
# JDK=kaffe
#
# dnl TODO: define some project exclusion variables
#
# AC_MSG_RESULT([checked (Kaffe $KAFFE_VER)])
# AC_MSG_WARN([EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to compile])
# echo "EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to compile" >>warn
# JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"`
elif test `$JAVAINTERPRETER --version 2>&1 | grep -c "GNU libgcj"` -gt 0; then
JDK=gcj
AC_MSG_RESULT([checked (gcj)])
_gij_version=`$JAVAINTERPRETER --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`;
_gij_longver=`echo $_gij_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
elif test `$JAVAINTERPRETER -version 2>&1 | awk '{ print }' | grep -c "BEA"` -gt 0; then
AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.in])
# JDK=bea
#
# dnl BEA JDK specific tests
# _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//`
# _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
#
# if test "$_jdk_ver" -lt 10500; then
# AC_MSG_ERROR([JDK is too old, you need at least BEA JDK 1.5.0])
# fi
#
# AC_MSG_RESULT([checked (BEA JDK $_jdk)])
#
# if test "$with_jdk_home" = ""; then
# AC_MSG_ERROR([In order to successfully build Apache OpenOffice using the BEA JDK,
#you must use the "--with-jdk-home" configure option explicitly])
# fi
#
# AC_MSG_WARN([A bug in certain BEA JREs can prevent you from successfully compiling some modules])
# echo "A bug in certain BEA JREs can prevent you from successfully compiling some modules" >>warn
#
# JAVA_HOME=$with_jdk_home
#
elif test `$JAVAINTERPRETER -version 2>&1 | awk '{ print }' | grep -c "IBM"` -gt 0; then
JDK=ibm
dnl IBM JDK specific tests
_jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//`
_jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
if test "$_jdk_ver" -lt 10500; then
AC_MSG_ERROR([IBM JDK is too old, you need at least 1.5])
fi
AC_MSG_RESULT([checked (IBM JDK $_jdk)])
if test "$with_jdk_home" = ""; then
AC_MSG_ERROR([In order to successfully build Apache OpenOffice using the IBM JDK,
you must use the "--with-jdk-home" configure option explicitly])
fi
JAVA_HOME=$with_jdk_home
else
JDK=sun
dnl SUN JDK specific tests
_jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//`
_jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
if test "$_jdk_ver" -lt 10500; then
AC_MSG_ERROR([JDK is too old, you need at least 1.5])
fi
AC_MSG_RESULT([checked (JDK $_jdk)])
JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"`
if test "$_os" = "WINNT"; then
JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"`
fi
if test "$_os" = "OS2"; then
JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"`
fi
fi
else
AC_MSG_ERROR([JAVA not found. You need at least jdk-1.5, or gcj-4])
fi
else
dnl Java disabled
JAVA_HOME=NO_JAVA_HOME ; export JAVA_HOME
fi
dnl ===================================================================
dnl Checks for javac
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test "$JDK" = "gcj"; then
javacompiler=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g" | $SED -e "s/java/javac/g"`
else
javacompiler="javac"
fi
if test "$_os" = "OS2"; then
if test x`echo "$javacompiler" | grep -i '\.exe$'` = x; then
javacompiler="${javacompiler}.exe"
fi
fi
if test -z "$with_jdk_home"; then
AC_PATH_PROG(JAVACOMPILER, $javacompiler)
else
_javac_path="$with_jdk_home/bin/$javacompiler"
dnl Check if there is a java compiler at all.
if test -x "$_javac_path"; then
JAVACOMPILER=$_javac_path
fi
fi
if test -z "$JAVACOMPILER"; then
AC_MSG_ERROR([$javacompiler not found, please use --with-jdk-home])
fi
if test "$_os" = "WINNT"; then
if test x`echo "$JAVACOMPILER" | grep -i '\.exe$'` = x; then
JAVACOMPILER="${JAVACOMPILER}.exe"
fi
JAVACOMPILER=`cygpath -d "$JAVACOMPILER"`
JAVACOMPILER=`cygpath -u "$JAVACOMPILER"`
fi
if test "$_os" = "OS2"; then
if test x`echo "$JAVACOMPILER" | grep -i '\.exe$'` = x; then
JAVACOMPILER="${JAVACOMPILER}.exe"
fi
fi
if test `$JAVACOMPILER -version 2>&1 | grep -c "Eclipse Java Compiler"` -gt 0; then
AC_MSG_CHECKING([re-checking JDK])
JDK=gcj
AC_MSG_RESULT([checked (ecj)])
#TODO: what's to do here? some switch to do 1.5 compiling?
JAVAFLAGS="-source 1.5 -target 1.5"
_gij_longver="40200"
fi
fi
JAVACISGCJ=""
dnl ===================================================================
dnl Checks that javac is gcj
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test `$JAVACOMPILER --version 2>&1 | grep -c "GCC"` -gt 0; then
JAVACISGCJ="yes"
fi
fi
AC_SUBST(JAVACISGCJ)
dnl ===================================================================
dnl Checks for javadoc
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test -z "$with_jdk_home"; then
AC_PATH_PROG(JAVADOC, javadoc)
else
_javadoc_path="$with_jdk_home/bin/javadoc"
if test "$_os" = "OS2"; then
if test x`echo "$_javadoc_path" | grep -i '\.exe$'` = x; then
_javadoc_path="${_javadoc_path}.exe"
fi
fi
dnl Check if there is a javadoc at all.
if test -x "$_javadoc_path"; then
JAVADOC=$_javadoc_path
else
AC_PATH_PROG(JAVADOC, javadoc)
fi
fi
if test -z "$JAVADOC"; then
AC_MSG_ERROR([$_javadoc_path not found, please use --with-jdk-home])
fi
if test "$_os" = "WINNT"; then
if test x`echo "$JAVADOC" | grep -i '\.exe$'` = x; then
JAVADOC="${JAVADOC}.exe"
fi
JAVADOC=`cygpath -d "$JAVADOC"`
JAVADOC=`cygpath -u "$JAVADOC"`
fi
if test "$_os" = "OS2"; then
if test x`echo "$JAVADOC" | grep -i '\.exe$'` = x; then
JAVADOC="${JAVADOC}.exe"
fi
fi
fi
if test "$SOLAR_JAVA" != ""; then
dnl first check if we have been asked to autodetect JAVA_HOME with a recent gij
if test "$JDK" = "gcj" -a -z "$JAVA_HOME"; then
if test "x$with_jdk_home" = "x" -a "$_gij_longver" -ge "40200"; then
cat > findhome.java <<_ACEOF
[import java.io.File;
class findhome
{
public static void main(String args[])
{
String jrelocation = System.getProperty("java.home");
File jre = new File(jrelocation);
System.out.println(jre.getParent());
}
}]
_ACEOF
AC_MSG_CHECKING([if javac works])
javac_cmd="$JAVACOMPILER findhome.java 1>&2"
AC_TRY_EVAL(javac_cmd)
if test $? = 0 && test -f ./findhome.class ; then
AC_MSG_RESULT([javac works])
else
echo "configure: javac test failed" >&5
cat findhome.java >&5
AC_MSG_ERROR([javac does not work - java projects will not build!])
fi
AC_MSG_CHECKING([if gij knows its java.home])
JAVA_HOME=`$JAVAINTERPRETER findhome`
if test $? = 0 && test "$JAVA_HOME" != "" ; then
AC_MSG_RESULT([$JAVA_HOME])
else
echo "configure: java test failed" >&5
cat findhome.java >&5
AC_MSG_ERROR([gij does not know its java.home - use --with-jdk-home])
fi
else
JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*$WITH_JAVA,,p"`
fi
fi
dnl second sanity check JAVA_HOME if possible
if test "$JDK" != "gcj" -o "$_gij_longver" -ge "40200"; then
# check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr
if test "$JAVA_HOME" = "/usr" -a "x$with_jdk_home" = "x"; then
javac_link_f=`readlink -f "$JAVACOMPILER" 2>/dev/null`
if test $? == 0 && test "$JAVACOMPILER" != "$javac_link_f"; then
# try to recover first by looking whether we have a alternatives
# system as in Debian or newer SuSEs where following /usr/bin/javac
# over /etc/alternatives/javac leads to the right bindir where we
# just need to strip a bit away to get a valid JAVA_HOME
# Solaris 11 is even worse, because target is relative, so use -f
JAVA_HOME="$javac_link_f"
elif readlink $JAVACOMPILER >/dev/null 2>/dev/null; then
# Darwin readlink(1) is so primitive it doesn't even support -f
# maybe only one level of symlink (e.g. on Mac)
JAVA_HOME=`readlink $JAVACOMPILER`
else
# else warn
AC_MSG_WARN([JAVA_HOME is set to /usr - this is very likely to be incorrect])
AC_MSG_WARN([if this is the case, please inform the correct JAVA_HOME with --with-jdk-home])
echo "JAVA_HOME is set to /usr - this is very likely to be incorrect" >> warn
echo "if this is the case, please inform the correct JAVA_HOME with --with-jdk-home" >> warn
fi
dnl now that we have the path to the real javac, make a JAVA_HOME out of it..
if test "$JAVA_HOME" != "/usr"; then
if test "$_os" = "Darwin"; then
dnl Leopard returns a non-suitable path with readlink - points to "Current" only
JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/Current/Commands/javac$,/CurrentJDK/Home,)
dnl Tiger already returns a JDK path..
JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/CurrentJDK/Commands/javac$,/CurrentJDK/Home,)
else
JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/bin/javac$,,)
fi
fi
fi
# now check if $JAVA_HOME is really valid
if test "$_os" = "Darwin"; then
if test ! -f "$JAVA_HOME/lib/jvm.cfg" -a "x$with_jdk_home" = "x"; then
JAVA_HOME_OK="NO"
fi
elif test ! -d "$JAVA_HOME/jre" -a "x$with_jdk_home" = "x"; then
JAVA_HOME_OK="NO"
fi
if test "$JAVA_HOME_OK" = "NO"; then
AC_MSG_WARN([JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script])
AC_MSG_WARN([attempted to find JAVA_HOME automatically, but apparently it failed])
AC_MSG_WARN([in case JAVA_HOME is incorrectly set, some projects with not be built correctly])
echo "JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script" >> warn
echo "attempted to find JAVA_HOME automatically, but apparently it failed" >> warn
echo "in case JAVA_HOME is incorrectly set, some projects with not be built correctly" >> warn
# if test "$JDK" = "gcj"; then
# echo "e.g. install java-1.4.2-gcj-compat-devel and use --with-jdk-home=/usr/lib/jvm/java-1.4.2-gcj" >> warn
# fi
fi
fi
fi
AWTLIB=
if test "$SOLAR_JAVA" != ""; then
AC_MSG_CHECKING([for jawt lib name])
if test "$JDK" = "gcj"; then
save_CFLAGS=$CFLAGS
save_LDFLAGS=$LDFLAGS
CFLAGS="$CFLAGS -I$JAVA_HOME/include"
LDFLAGS="$LDFLAGS -L$JAVA_HOME/lib -lgcj"
exec 6>/dev/null # no output
AC_CHECK_HEADER(jni.h, [],
[AC_MSG_ERROR([jni.h could not be found. Mismatch between gcc and libgcj or libgcj-devel missing?])], [])
AC_CHECK_LIB(gcjawt, JAWT_GetAWT, [ AWTLIB="-lgcjawt -lgcj"] )
exec 6>&1 # output on again
CFLAGS=$save_CFLAGS
LDFLAGS=$save_LDFLAGS
fi
# IBM SDK 1.5.0-sr5 includes libjawt.so with unresolved symbols.
# A workaround is to link also against libpmawt.so
if test "$JDK" = "ibm" ; then
save_CFLAGS=$CFLAGS
save_LDFLAGS=$LDFLAGS
save_LD_LIBRARY_PATH=$LD_LIBRARY_PATH
CFLAGS="$CFLAGS -I$JAVA_HOME/include"
LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin"
LD_LIBRARY_PATH=$JAVA_HOME/jre/bin:$JAVA_HOME/jre/bin/classic:$JAVA_HOME/jre/bin/xawt:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
exec 6>/dev/null # no output
AC_CHECK_HEADER(jni.h, [],
[AC_MSG_ERROR([jni.h could not be found.])], [])
AC_CHECK_LIB(jawt, JAWT_GetAWT, [ AWTLIB="-ljawt"] )
if test -z "$AWTLIB"; then
LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin/xawt -ljawt"
AC_CHECK_LIB(mawt, JAWT_GetAWT, [ AWTLIB="-L$JAVA_HOME/jre/bin/xawt -ljawt -lmawt"])
fi
exec 6>&1 # output on again
CFLAGS=$save_CFLAGS
LDFLAGS=$save_LDFLAGS
LD_LIBRARY_PATH=$save_LD_LIBRARY_PATH
fi
if test -z "$AWTLIB"; then
AWTLIB=-ljawt
fi
AC_MSG_RESULT([$AWTLIB])
AC_SUBST(AWTLIB)
fi
dnl ===================================================================
dnl Check for optional gcj for AOT
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
AC_MSG_CHECKING([whether to enable gcj aot compilation])
if test -n "$enable_gcjaot" && test "$enable_gcjaot" != "no"; then
AC_MSG_RESULT([yes])
if test `echo $WITH_JAVA | grep -c "gij"` -eq 0; then
gcjaot="gcj"
else
gcjaot=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g"`
fi
AC_MSG_RESULT([$gcjaot])
if test -n "$with_jdk_home"; then
_javac_path="$with_jdk_home/bin/$gcjaot"
dnl Check if there is a gcj at all.
if test -x "$_javac_path"; then
JAVAAOTCOMPILER=$_javac_path
fi
fi
if test -z "$JAVAAOTCOMPILER"; then
AC_PATH_PROG(JAVAAOTCOMPILER, $gcjaot)
fi
if test -z "$JAVAAOTCOMPILER"; then
AC_MSG_WARN([$gcjaot not found, please use --with-jdk-home])
fi
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(JAVA_HOME)
AC_SUBST(JDK)
AC_SUBST(JAVAFLAGS)
AC_SUBST(JAVAINTERPRETER)
AC_SUBST(JAVAIFLAGS)
AC_SUBST(JAVACOMPILER)
AC_SUBST(JAVAAOTCOMPILER)
AC_SUBST(JAVADOC)
dnl ===================================================================
dnl Checks for specific files.
dnl ===================================================================
dnl ===================================================================
dnl Checks for programs.
dnl ===================================================================
AC_MSG_CHECKING([whether to enable EPM for packing])
if test "$enable_epm" = "yes"; then
AC_MSG_RESULT([yes])
dnl ===================================================================
dnl Check for epm - not needed for windows
dnl ===================================================================
if test "$_os" != "WINNT"; then
if test -n "$with_epm"; then
EPM=$with_epm
else
AC_PATH_PROG(EPM, epm, no)
fi
# Override system epm and --with-epm if --with-epm-url is used.
if test -n "$with_epm_url" ; then
# At this moment we can not verify the URL or the content that we want to download.
EPM_URL=$with_epm_url
AC_MSG_RESULT([epm will be downloaded and compiled in bootstrap])
EPM=
echo "EPM will be built."
BUILD_EPM=YES
BUILD_TYPE="$BUILD_TYPE EPM"
else
if test "$EPM" = "no" ; then
AC_MSG_ERROR([no. Install ESP Package Manager (http://www.msweet.org/projects.php?Z2) and/or specify the path to the right epm (--with-epm). Or specify an URL to an epm-3.7 source package (--with-epm-url); run configure with the --help option for a list of possible URLs.])
else
# Gentoo has some epm which is something different...
AC_MSG_CHECKING([whether the found epm is the right epm])
if $EPM | grep "ESP Package Manager" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no. Install ESP Package Manager (http://www.msweet.org/projects.php?Z2) and/or specify the path to the right epm (--with-epm). Or specify an URL to an epm-3.7 source package (--with-epm-url); run configure with the --help option for a list of possible URLs.])
fi
AC_MSG_CHECKING([epm version])
EPM_VERSION=`$EPM | grep 'ESP Package Manager' | cut -d' ' -f4 | $SED -e s/v//`
if test "`echo $EPM_VERSION | cut -d'.' -f1`" -gt "3" || \
test "`echo $EPM_VERSION | cut -d'.' -f1`" -eq "3" -a "`echo $EPM_VERSION | cut -d'.' -f2`" -ge "7"; then
AC_MSG_RESULT([OK, >= 3.7])
BUILD_EPM=NO
if test "$_os" = "Darwin"; then
AC_MSG_CHECKING([which PackageMaker EPM thinks to use])
_pm=`strings $EPM | grep PackageMaker | cut -d" " -f1`
if test "$_pm" = "/Developer/Applications/PackageMaker.app/Contents/MacOS/PackageMaker"; then
AC_MSG_ERROR([$_pm; PackageMaker expected in wrong path. Either patch your epm with the right path (/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker)])
elif test "$_pm" = "/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker"; then
AC_MSG_RESULT([$_pm, ok])
else # we never should get here, but go safe
AC_MSG_ERROR([$_pm; PackageMaker expected in unknown path. Either patch your epm with the right path (/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker)])
fi
fi
else
AC_MSG_ERROR([too old. epm >= 3.7 is required.])
fi
fi
fi
fi
# test which package format to use
AC_MSG_CHECKING([which package format to use])
# defaults
case "$_os" in
OS2)
PKGFORMAT=native
;;
Darwin)
PKGFORMAT=dmg
;;
SunOS)
PKGFORMAT=pkg
;;
Linux)
# if building on Debian, default should be deb...
if test -e /etc/debian_version; then
PKGFORMAT=deb
else
PKGFORMAT=rpm
fi
;;
AIX)
PKGFORMAT=aix
;;
*BSD)
PKGFORMAT=bsd
;;
OSF1)
PKGFORMAT=setld
;;
WINNT)
PKGFORMAT=msi
;;
# we never should get here since we check the arciecture/os at the beginning,
# but go sure...
*)
AC_MSG_ERROR([unknown system])
esac
if test -n "$with_package_format"; then
for i in $with_package_format; do
case "$i" in
aix | bsd | deb | inst | tardist | osx | pkg | rpm | setld | native | portable | archive | dmg | installed | msi)
;;
*)
AC_MSG_ERROR([unsupported format $i. Supported by EPM are:
aix - AIX software distribution
bsd - FreeBSD, NetBSD, or OpenBSD software distribution
depot or swinstall - HP-UX software distribution
deb - Debian software distribution
inst or tardist - IRIX software distribution
osx - MacOS X software distribution
pkg - Solaris software distribution
rpm - RedHat software distribution
setld - Tru64 (setld) software distribution
native - "Native" software distribution for the platform
portable - Portable software distribution
OOo additionally supports:
archive - .tar.gz or .zip
dmg - Mac OS X .dmg
installed - installation tree
msi - Windows .msi
])
;;
esac
done
PKGFORMAT="$with_package_format"
fi
AC_MSG_RESULT([$PKGFORMAT])
if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null; then
AC_MSG_CHECKING([for rpm])
for a in "$RPM" rpmbuild rpm; do
$a --usage >/dev/null 2> /dev/null
if test $? -eq 0; then
RPM=$a
break
else
$a --version >/dev/null 2> /dev/null
if test $? -eq 0; then
RPM=$a
break
fi
fi
done
if test -z "$RPM" ; then
AC_MSG_ERROR([not found])
elif "$RPM" --usage 2>&1 | $EGREP -- -bb >/dev/null; then
RPM_PATH=`which $RPM`
AC_MSG_RESULT([$RPM_PATH])
else
AC_MSG_ERROR([cannot build packages. Try installing rpmbuild.])
fi
fi
if echo "$PKGFORMAT" | $EGREP deb 2>&1 >/dev/null; then
AC_PATH_PROG(DPKG, dpkg, no)
if test "$DPKG" = "no"; then
AC_MSG_ERROR([dpkg needed for deb creation. Install dpkg.])
fi
fi
if echo "$PKGFORMAT" | $EGREP osx 2>&1 >/dev/null; then
if test "$_os" = "Darwin"; then
AC_MSG_CHECKING([for PackageMaker availability])
if ! test -x /Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker; then
AC_MSG_ERROR([not installed. Please install Apples Dev Tools])
else
AC_MSG_RESULT([ok])
fi
else
AC_MSG_ERROR([PackageMaker needed to build OSX packages and you are not on OSX...])
fi
fi
if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null || \
echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then
if test "$EPM" != "no" && test "$EPM" != "internal"; then
if test "`echo $EPM_VERSION | cut -d'.' -f1`" -lt "4"; then
AC_MSG_CHECKING([whether epm is patched for OOos needs])
if grep "Patched for Apache OpenOffice" $EPM >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
if echo "$PKGFORMAT" | grep -q rpm; then
_pt="rpm"
AC_MSG_WARN([the rpms will need to be installed with --nodeps])
echo "the rpms will need to be installed with --nodeps" >> warn
else
_pt="pkg"
fi
AC_MSG_WARN([the ${_pt}s will not be relocateable])
echo "the ${_pt}s will not be relocateable" >> warn
AC_MSG_WARN([if you want to make sure installation without --nodeps and
relocation will work, you need to patch your epm with the
patch in epm/epm-3.7.patch or build with
--with-epm=internal which will build a suitable epm])
fi
fi
fi
fi
if echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then
AC_PATH_PROG(PKGMK, pkgmk, no)
if test "$PKGMK" = "no"; then
AC_MSG_ERROR([pkgmk needed for Solaris pkg creation. Install it.])
fi
fi
AC_SUBST(RPM)
AC_SUBST(DPKG)
AC_SUBST(PKGMK)
else
AC_MSG_RESULT([no])
BUILD_EPM=NO
EPM=NO
PKGFORMAT=native
fi
AC_SUBST(BUILD_EPM)
AC_SUBST(EPM_URL)
AC_SUBST(EPM)
AC_SUBST(PKGFORMAT)
dnl ===================================================================
dnl Check for gperf
dnl ===================================================================
AC_PATH_PROG(GPERF, gperf)
if test -z "$with_gperf"; then
AC_PATH_PROG(GPERF, gperf)
if test -z "$GPERF"; then
AC_MSG_ERROR([gperf not found but needed. Install it and/or specify --with-gperf=/path/to/it.])
fi
else
if test -x "$with_gperf"; then
GPERF=$with_gperf
else
AC_MSG_ERROR([--with-gperf did not point to an executable])
fi
fi
AC_MSG_CHECKING([gperf version])
if test "`$GPERF --version | $EGREP ^GNU\ gperf | $AWK '{ print $3 }' | cut -d. -f1`" -ge "3"; then
AC_MSG_RESULT([OK])
GPERF=$GPERF
else
AC_MSG_ERROR([too old, you need at least 3.0.0])
fi
AC_SUBST(GPERF)
dnl ===================================================================
dnl Check for building stax
dnl ===================================================================
AC_MSG_CHECKING([whether to build the stax])
if test -f "./stax/download/stax-1.2.0.jar"; then
BUILD_STAX=NO
AC_MSG_RESULT([no, will use the prebuilt stax/download/stax-1.2.0.jar])
else
BUILD_STAX=YES
AC_MSG_RESULT([yes])
fi
AC_SUBST(BUILD_STAX)
dnl ===================================================================
dnl Check for building ODK
dnl ===================================================================
AC_MSG_CHECKING([whether to build the ODK])
if test "z$enable_odk" = "z" -o "$enable_odk" != "no"; then
AC_MSG_RESULT([yes])
if test "$WITH_JAVA" != "no"; then
AC_MSG_CHECKING([for external/unowinreg/unowinreg.dll])
if ! test -f "./external/unowinreg/unowinreg.dll"; then
HAVE_UNOWINREG_DLL=no
else
HAVE_UNOWINREG_DLL=yes
fi
if test "$HAVE_UNOWINREG_DLL" = "yes"; then
AC_MSG_RESULT([found])
BUILD_UNOWINREG=NO
else
if test "$_os" = "WINNT"; then
AC_MSG_RESULT([not found, will be built])
else
AC_MSG_WARN([not found, will be cross-built using mingw32])
fi
BUILD_UNOWINREG=YES
fi
if test "$_os" != "WINNT" && test "$BUILD_UNOWINREG" = "YES"; then
if test -z "$WITH_MINGWIN" || test "$WITH_MINGWIN" = "0"; then
AC_MSG_ERROR([for rebuilding unowinreg.dll you need the mingw32 C++ compiler.
Specify mingw32 g++ executable name with --with-mingwin.
Or use prebuilt one from http://tools.openoffice.org/unowinreg_prebuild/680/ and
put it into external/unowinreg using your browser or a command equivalent to:
wget -O external/unowinreg/unowinreg.dll http://www.openoffice.org/tools/unowinreg_prebuild/680/unowinreg.dll])
fi
if echo "$WITH_MINGWIN" | $EGREP -q "/"; then
if ! test -x "$WITH_MINGWIN"; then MINGWCXX=false; else MINGWCXX=`basename $WITH_MINGWIN`; fi
else
AC_CHECK_TOOL(MINGWCXX, $WITH_MINGWIN, false)
fi
if test "$MINGWCXX" = "false"; then
AC_MSG_ERROR(specified MinGW32 C++ cross-compiler not found. Install it or correct name.)
fi
AC_MSG_CHECKING(whether we are using the MinGW32 cross C++ compiler)
if ! echo "`$MINGWCXX -dumpmachine`" | grep -q mingw32; then
AC_MSG_ERROR(no)
else
AC_MSG_RESULT(yes)
fi
if echo "$WITH_MINGWIN" | $EGREP -q "/"; then
if ! test -x "`echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/`"; then MINGSTRIP=false; else MINGWSTRIP=$(basename $(echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/)); fi
else
AC_CHECK_TOOL(MINGWSTRIP, `echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/`, false)
fi
if test "$MINGWSTRIP" = "false"; then
AC_MSG_ERROR(MinGW32 binutils needed. Install them.)
fi
AC_LANG_PUSH([C++])
save_CXX=$CXX
save_CXXCPP=$CXXCPP
CXX=$MINGWCXX
CXXCPP="$MINGWCXX -E"
save_CXXFLAGS=$CXXFLAGS
save_CPPFLAGS=$CPPFLAGS
CXXFLAGS="$CXXFLAGS -I$JAVA_HOME/include"
CPPFLAGS="$CPPFLAGS -I$JAVA_HOME/include"
# LIBS contains -lcrypt etc due to teh AC_CHECK_LIBS which obviously
# do not make sense here (and 'd make the check fail)
save_LIBS=$LIBS
LIBS=""
AC_HAVE_LIBRARY(kernel32)
AC_HAVE_LIBRARY(advapi32)
AC_CHECK_HEADER(windows.h, [], [AC_MSG_ERROR([windows.h missing])])
CXXFLAGS=$save_CXXFLAGS
CPPFLAGS=$save_CPPFLAGS
CXX=$save_CXX
CXXCPP=$save_CXXCPP
LIBS=$save_LIBS
AC_LANG_POP([C++])
fi
fi
BUILD_TYPE="$BUILD_TYPE ODK"
else
AC_MSG_RESULT([no])
BUILD_UNOWINREG=NO
fi
AC_SUBST(BUILD_UNOWINREG)
AC_SUBST(MINGWCXX)
AC_SUBST(MINGWSTRIP)
dnl ===================================================================
dnl Check for system stdlibs
dnl ===================================================================
AC_MSG_CHECKING([whether to provide libstdc++/libgcc_s in the installset])
if test -n "$with_system_stdlibs" -o -n "$with_system_libs" && \
test "$with_system_stdlibs" != "no"; then
AC_MSG_RESULT([no])
SYSTEM_STDLIBS=YES
else
AC_MSG_RESULT([yes])
SYSTEM_STDLIBS=NO
fi
AC_SUBST(SYSTEM_STDLIBS)
dnl ===================================================================
dnl Check for system zlib
dnl ===================================================================
if test "$_os" = "Darwin" && test "$with_system_zlib" != "no"; then
with_system_zlib=yes
fi
AC_MSG_CHECKING([which zlib to use])
if test -n "$with_system_zlib" -o -n "$with_system_libs" && \
test "$with_system_zlib" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_ZLIB=YES
AC_CHECK_HEADER(zlib.h, [],
[AC_MSG_ERROR(zlib.h not found. install zlib)], [])
AC_CHECK_LIB(z, deflate, [ ZLIB=-lz ],
[AC_MSG_ERROR(zlib not found or functional)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_ZLIB=NO
BUILD_TYPE="$BUILD_TYPE ZLIB"
fi
AC_SUBST(SYSTEM_ZLIB)
dnl ===================================================================
dnl Check for system jpeg
dnl ===================================================================
AC_MSG_CHECKING([which jpeg to use])
if test -n "$with_system_jpeg" -o -n "$with_system_libs" && \
test "$with_system_jpeg" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_JPEG=YES
AC_CHECK_HEADER(jpeglib.h, [],
[AC_MSG_ERROR(jpeg.h not found. install libjpeg)], [])
AC_CHECK_LIB(jpeg, jpeg_resync_to_restart, [ JPEG3RDLIB=-ljpeg ],
[AC_MSG_CHECKING(jpeg library not found or fuctional)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_JPEG=NO
BUILD_TYPE="$BUILD_TYPE JPEG"
fi
AC_SUBST(SYSTEM_JPEG)
dnl ===================================================================
dnl Check for system expat
dnl ===================================================================
AC_MSG_CHECKING([which expat to use])
if test -n "$with_system_expat" -o -n "$with_system_libs" && \
test "$with_system_expat" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_EXPAT=YES
AC_CHECK_HEADER(expat.h, [],
[AC_MSG_ERROR(expat.h not found. install expat)], [])
AC_CHECK_LIB(expat, XML_ParserCreate, [],
[AC_MSG_RESULT(expat library not found or functional.)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_EXPAT=NO
BUILD_TYPE="$BUILD_TYPE EXPAT"
fi
AC_SUBST(SYSTEM_EXPAT)
dnl ===================================================================
dnl Check for system libwpd
dnl ===================================================================
AC_MSG_CHECKING([which libwpd to use])
if test -n "$with_system_libwpd" -o -n "$with_system_libs" && \
test "$with_system_libwpd" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBWPD=YES
PKG_CHECK_MODULES( LIBWPD, libwpd-0.8 )
else
AC_MSG_RESULT([no])
SYSTEM_LIBWPD=
fi
AC_SUBST(SYSTEM_LIBWPD)
AC_SUBST(LIBWPD_CFLAGS)
AC_SUBST(LIBWPD_LIBS)
dnl ===================================================================
dnl Check for system cppunit
dnl ===================================================================
WITH_CPPUNIT=
AC_MSG_CHECKING([which cppunit to use])
if test -n "$with_system_cppunit" -o -n "$with_system_libs" && \
test "$with_system_cppunit" != "no"; then
SYSTEM_CPPUNIT=YES
# might work for earlier, too but go sure:
PKG_CHECK_MODULES( CPPUNIT,
cppunit >= 1.12.0,
WITH_CPPUNIT="YES",
WITH_CPPUNIT="")
if test -n "$WITH_CPPUNIT"; then
AC_MSG_RESULT([found system cppunit $CPPUNIT])
else
AC_MSG_WARN([dit not find system cppunit version 1.12.0 or later])
fi
else
AC_MSG_WARN([not using cppunit])
SYSTEM_CPPUNIT=NO
fi
AC_SUBST(SYSTEM_CPPUNIT)
AC_SUBST(CPPUNIT_CFLAGS)
AC_SUBST(CPPUNIT_LIBS)
AC_SUBST(WITH_CPPUNIT)
dnl ===================================================================
dnl Check whether freetype is available
dnl ===================================================================
if test "$test_freetype" = "yes"; then
AC_MSG_CHECKING([whether freetype is available])
PKG_CHECK_MODULES( FREETYPE, freetype2 >= 2.0 )
fi
AC_SUBST(FREETYPE_CFLAGS)
AC_SUBST(FREETYPE_LIBS)
dnl ===================================================================
dnl Check whether freetype2 supports emboldening
dnl ===================================================================
if test "$test_freetype" = "yes"; then
save_CPPFLAGS="$CPPFLAGS"
save_LDFLAGS="$LDFLAGS"
save_LIBS="$LIBS"
CPPFLAGS="$CPPFLAGS $FREETYPE_CFLAGS"
LDFLAGS="$LDFLAGS $FREETYPE_LIBS"
AC_CHECK_LIB(freetype, FT_GlyphSlot_Embolden,
[USE_FT_EMBOLDEN="YES"], [USE_FT_EMBOLDEN="NO"], [])
LDFLAGS="$save_LDFLAGS"
CPPFLAGS="$save_CPPFLAGS"
LIBS="$save_LIBS"
fi
AC_SUBST(USE_FT_EMBOLDEN)
if test -n "$with_system_libxslt" -o -n "$with_system_libs" && \
test "$with_system_libxslt" != "no"; then
if test -z "$with_system_libxml" -a -z "$with_system_libs" || \
test "$with_system_libxml" = "no"; then
# somehow AC_MSG_WARN won't work...
echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be build with system-libxml"
echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be build with system-libxml" >> warn
with_system_libxml=yes
fi
fi
if test -n "$with_system_libxml" -o -n "$with_system_libs" && \
test "$with_system_libxml" != "no"; then
if test -z "$with_system_libxslt" -a -z "$with_system_libs" || \
test "$with_system_libxslt" = "no"; then
# somehow AC_MSG_WARN won't work...
echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be build with system-libxslt"
echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be build with system-libxslt" >> warn
with_system_libxslt=yes
fi
fi
dnl ===================================================================
dnl Check for system libxslt
dnl ===================================================================
AC_MSG_CHECKING([which libxslt to use])
if test -n "$with_system_libxslt" -o -n "$with_system_libs" -o \
"$_os" = "Darwin" && \
test "$with_system_libxslt" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBXSLT=YES
if test "$_os" != "Darwin"; then
PKG_CHECK_MODULES(LIBXSLT, libxslt)
else
LIBXSLT_CFLAGS=`xslt-config --cflags`
LIBXSLT_LIBS=`xslt-config --libs`
fi
dnl Check for xsltproc
AC_PATH_PROG(XSLTPROC, xsltproc, no)
if test "$XSLTPROC" = "no"; then
AC_MSG_ERROR([xsltproc is required])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_LIBXSLT=NO
BUILD_TYPE="$BUILD_TYPE LIBXSLT"
fi
AC_SUBST(SYSTEM_LIBXSLT)
AC_SUBST(LIBXSLT_CFLAGS)
AC_SUBST(LIBXSLT_LIBS)
dnl ===================================================================
dnl Check for system libxml
dnl ===================================================================
AC_MSG_CHECKING([which libxml to use])
if test -n "$with_system_libxml" -o -n "$with_system_libs" -o \
"$_os" = "Darwin" && \
test "$with_system_libxml" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBXML=YES
BUILD_TYPE="$BUILD_TYPE LIBXMLSEC"
if test "$_os" != "Darwin"; then
PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.0)
else
LIBXML_CFLAGS=`xml2-config --cflags`
LIBXML_LIBS=`xml2-config --libs`
fi
else
AC_MSG_RESULT([internal])
SYSTEM_LIBXML=NO
BUILD_TYPE="$BUILD_TYPE LIBXML2 LIBXMLSEC"
fi
AC_SUBST(SYSTEM_LIBXML)
AC_SUBST(LIBXML_CFLAGS)
AC_SUBST(LIBXML_LIBS)
dnl ===================================================================
dnl Checks for a MacOS platform SDK compatible with an OSX 10.7 deployment target
dnl ===================================================================
if test "$_os" = "Darwin"; then
sdk_target=10.7
AC_MSG_CHECKING([checking SDK compatiblity with OSX $sdk_target])
sdk_minor=`echo $sdk_target | cut -d"." -f2`
if test "$sdk_minor" -lt "7"; then
AC_MSG_ERROR([SDK version < 10.7 is not longer supported])
else
MACOSX_DEPLOYMENT_TARGET=$sdk_target
sdk_found=`xcodebuild -showsdks | grep "sdk macosx10.[[789]]" | sed -e "s/.*sdk //" | head -n1`
if test -z "$sdk_found"; then
AC_MSG_ERROR([No SDK with OSX $sdk_target compatibility found])
else
AC_MSG_RESULT([yes, by using SDK $sdk_found])
fi
sdk_path=`xcodebuild -version -sdk ${sdk_found} Path`
AC_MSG_CHECKING([for $sdk_path])
if test -d "$sdk_path"; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([not found!])
fi
MACOSX_SDK_PATH=$sdk_path
fi
fi
AC_SUBST(MACOSX_DEPLOYMENT_TARGET)
AC_SUBST(MACOSX_SDK_PATH)
dnl ===================================================================
dnl Check for system python
dnl ===================================================================
AC_MSG_CHECKING([which python to use])
if test "$_os" = "Darwin" && test "$with_system_python" != "no"; then
with_system_python=yes
_python="/Library/Frameworks/Python.framework/Versions/Current/bin/python"
if test ! -f $_python; then
_python="/usr/bin/python"
fi
AC_MSG_RESULT([compiling against system python ($_python)])
_python_hexversion=`$_python -c "import sys; print(sys.hexversion);"`
dnl hex version of Python 2.7.1 = 34013680
if test $_python_hexversion -ge 34013680 ; then
_python_version=`$_python -c "import sys; print sys.version;" | head -c 3`
AC_MSG_RESULT([compiling against system python (version $_python_version)])
_python_ver=`$_python -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('VERSION'));"`
if test -d "/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"; then
PYTHON_CFLAGS="-I/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"
elif test -d "$MACOSX_SDK_PATH/usr/include/python$_python_ver"; then
PYTHON_CFLAGS="-I$MACOSX_SDK_PATH/usr/include/python$_python_ver"
else
PYTHON_CFLAGS="-I$MACOSX_SDK_PATH/System/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"
fi
else
AC_MSG_ERROR([Python 2.7.1 or higher is required])
fi
PYTHON_LIBS="-framework Python"
elif test -n "$with_system_python" -o -n "$with_system_libs" && \
test "$with_system_python" != "no"; then
with_system_python=yes
AC_MSG_RESULT([external])
AM_PATH_PYTHON([2.7])
python_include=`$PYTHON -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('INCLUDEPY'));"`
python_version=`$PYTHON -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('VERSION'));"`
PYTHON_CFLAGS="-I$python_include"
PYTHON_LIBS="-lpython$python_version"
fi
if test "$with_system_python" = "yes" ; then
SYSTEM_PYTHON=YES
dnl check if the headers really work:
save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $PYTHON_CFLAGS"
AC_CHECK_HEADER(Python.h, [],
[AC_MSG_ERROR(Python headers not found)], [])
CPPFLAGS="$save_CPPFLAGS"
else
SYSTEM_PYTHON=NO
BUILD_TYPE="$BUILD_TYPE PYTHON"
AC_MSG_RESULT([internal])
# Embedded python dies without Home set
if test "z$HOME" = "z"; then
export HOME="";
fi
# bz2 tarball and bzip2 is not standard
if test -z "$BZIP2"; then
AC_PATH_PROG( BZIP2, bzip2)
if test -z "$BZIP2"; then
AC_MSG_ERROR([the internal Python module has a .tar.bz2. You need bzip2])
fi
fi
fi
AC_SUBST(SYSTEM_PYTHON)
AC_SUBST(PYTHON_CFLAGS)
AC_SUBST(PYTHON_LIBS)
HOME=`echo $HOME | sed 's:\\\\:/:g'`
AC_SUBST(HOME)
dnl ===================================================================
dnl Check for system lucene
dnl ===================================================================
AC_MSG_CHECKING([which lucene to use])
if test -n "$with_system_lucene" -o -n "$with_system_libs" && \
test "$with_system_lucene" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LUCENE=YES
if test -z $LUCENE_CORE_JAR; then
AC_CHECK_FILE(/usr/share/java/lucene-core-2.9.4.jar,
[ LUCENE_CORE_JAR=/usr/share/java/lucene-core-2.9.4.jar ],
[
AC_CHECK_FILE(/usr/share/java/lucene-core.jar,
[ LUCENE_CORE_JAR=/usr/share/java/lucene-core.jar ],
[ AC_CHECK_FILE(/usr/share/java/lucene.jar,
[ LUCENE_CORE_JAR=/usr/share/java/lucene.jar ],
[ AC_MSG_ERROR(lucene-core.jar replacement not found)]
)
]
)
]
)
else
AC_CHECK_FILE($LUCENE_CORE_JAR, [],
[AC_MSG_ERROR(lucene-core.jar not found.)], [])
fi
if test -z $LUCENE_ANALYZERS_JAR; then
AC_CHECK_FILE(/usr/share/java/lucene-analyzers-2.3.jar,
[ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-analyzers-2.3.jar ],
[
AC_CHECK_FILE(/usr/share/java/lucene-contrib/lucene-analyzers.jar,
[ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-contrib/lucene-analyzers.jar ],
[ AC_MSG_ERROR(lucene-analyzers.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LUCENE_CORE_JAR, [],
[ AC_MSG_ERROR(lucene-analyzers.jar not found.)], [])
fi
AC_MSG_CHECKING([whether lucene is version 2.x])
export LUCENE_CORE_JAR
if $PERL -e 'use Archive::Zip;
my $file = "$ENV{'LUCENE_CORE_JAR'}";
my $zip = Archive::Zip->new( $file );
my $mf = $zip->contents ( "META-INF/MANIFEST.MF" );
if ( $mf =~ m/Specification-Version: 2.*/ ) {
exit 0;
} else {
exit 1;
}'; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
AC_MSG_CHECKING([whether lucene is version 3.x])
if $PERL -e 'use Archive::Zip;
my $file = "$ENV{'LUCENE_CORE_JAR'}";
my $zip = Archive::Zip->new( $file );
my $mf = $zip->contents ( "META-INF/MANIFEST.MF" );
if ( $mf =~ m/Specification-Version: 3.*/ ) {
exit 0;
} else {
exit 1;
}'; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, you need lucene 2 or 3])
fi
fi
else
AC_MSG_RESULT([internal])
SYSTEM_LUCENE=NO
BUILD_TYPE="$BUILD_TYPE LUCENE"
fi
AC_SUBST(SYSTEM_LUCENE)
AC_SUBST(LUCENE_CORE_JAR)
AC_SUBST(LUCENE_ANALYZERS_JAR)
AC_MSG_CHECKING([whether to build the MySQL Connector extension])
if test -n "$enable_mysql_connector" -a "$enable_mysql_connector" != "no"; then
AC_MSG_RESULT([yes])
ENABLE_MYSQLC=YES
AC_MSG_CHECKING([for mysqlc module])
if test -d mysqlc; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
BUILD_TYPE="$BUILD_TYPE MYSQLC"
else
AC_MSG_RESULT([no])
ENABLE_MYSQLC=NO
fi
AC_SUBST(ENABLE_MYSQLC)
if test "$ENABLE_MYSQLC" = "YES"; then
dnl ===================================================================
dnl Check for system MySQL
dnl ===================================================================
AC_MSG_CHECKING([for mysql pre-requisites])
if test -n "$with_system_mysql" -o -n "$with_system_libs" && \
test "$with_system_mysql" != "no" && test "$with_system_libs" != "no"; then
AC_MSG_RESULT([external MySQL])
SYSTEM_MYSQL=YES
AC_PATH_PROG( MYSQLCONFIG, mysql_config)
AC_MSG_CHECKING([MySQL version])
if test -z "$MYSQLCONFIG" -o ! -x "$MYSQLCONFIG" ; then
AC_MSG_ERROR([can not find/execute mysql_config]);
fi
MYSQL_VERSION=`$MYSQLCONFIG --version`
MYSQL_MAJOR=`$MYSQLCONFIG --version | cut -d"." -f1`
if test "$MYSQL_MAJOR" -ge "5"; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([too old, use 5.0.x or 5.1.x])
fi
AC_MSG_CHECKING([for MySQL Client library])
MYSQL_INC=`$MYSQLCONFIG --include`
MYSQL_LIB=`$MYSQLCONFIG --libs`
MYSQL_DEFINES=`$MYSQLCONFIG --cflags | sed -e s,$MYSQL_INC,,`
AC_MSG_RESULT([includes $MYSQL_INC, libraries $MYSQL_LIB])
else
SYSTEM_MYSQL=NO
if test -n "$with_libmysql_path"; then
AC_MSG_RESULT([external Connector/C (libmysql)])
LIBMYSQL=libmysql.so
if test "$_os" = "Darwin"; then
LIBMYSQL=libmysql.dylib
elif test "$_os" = "WINNT"; then
LIBMYSQL=libmysql.dll
fi
AC_MSG_CHECKING([for $LIBMYSQL])
if test -e "$with_libmysql_path/lib/$LIBMYSQL"; then
AC_MSG_RESULT([found.])
LIBMYSQL_PATH=$with_libmysql_path
else
AC_MSG_ERROR([not found. Please specify proper path in --with-libmysql-path.])
fi
else
AC_MSG_ERROR([not given. Please specify either --with-system-mysql or --with-libmysql-path])
fi
fi
AC_SUBST(SYSTEM_MYSQL)
AC_SUBST(MYSQL_INC)
AC_SUBST(MYSQL_LIB)
AC_SUBST(MYSQL_DEFINES)
AC_SUBST(LIBMYSQL_PATH)
AC_LANG_PUSH([C++])
dnl ===================================================================
dnl Check for system MySQL C++ Connector
dnl ===================================================================
# FIXME!
# who thought this too-generic cppconn dir was a good idea?
AC_MSG_CHECKING([MySQL Connector/C++])
if test -n "$with_system_mysql_cppconn" -o -n "$with_system_libs" && \
test "$with_system_mysql_cppconn" != "no" && test "$with_system_libs" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MYSQL_CPPCONN=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(mysql_driver.h, [],
[AC_MSG_ERROR(mysql_driver.h not found. install MySQL C++ Connectivity)], [])
AC_CHECK_LIB(mysqlcppconn, main, [],
[AC_MSG_ERROR(MySQL C++ Connectivity lib not found or functional)], [])
AC_MSG_CHECKING([version])
AC_TRY_RUN([
#include <mysql_driver.h>
int main(int argc, char **argv) {
sql::Driver *driver;
driver = get_driver_instance();
if (driver->getMajorVersion() > 1 || \
(driver->getMajorVersion() == 1 && driver->getMinorVersion() > 0) || \
(driver->getMajorVersion() == 1 && driver->getMinorVersion() == 0 && driver->getPatchVersion() >= 6))
return 0;
else
return 1;
}
], [AC_MSG_RESULT(OK)], [AC_MSG_ERROR([not suitable, we need >= 1.0.6])])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([no])
SYSTEM_MYSQL_CPPCONN=
fi
AC_LANG_POP([C++])
AC_SUBST(SYSTEM_MYSQL_CPPCONN)
fi
dnl ===================================================================
dnl Check for system hsqldb
dnl ===================================================================
AC_MSG_CHECKING([which hsqldb to use])
if test -n "$with_system_hsqldb" -o -n "$with_system_libs" && \
test "$with_system_hsqldb" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_HSQLDB=YES
if test -z $HSQLDB_JAR; then
HSQLDB_JAR=/usr/share/java/hsqldb.jar
fi
AC_CHECK_FILE($HSQLDB_JAR, [],
[AC_MSG_ERROR(hsqldb.jar not found.)], [])
AC_MSG_CHECKING([whether hsqldb is 1.8.0.x])
export HSQLDB_JAR
if $PERL -e 'use Archive::Zip;
my $file = "$ENV{'HSQLDB_JAR'}";
my $zip = Archive::Zip->new( $file );
my $mf = $zip->contents ( "META-INF/MANIFEST.MF" );
if ( $mf =~ m/Specification-Version: 1.8.*/ ) {
push @l, split(/\n/, $mf);
foreach my $line (@l) {
if ($line =~ m/Specification-Version:/) {
($t, $version) = split (/:/,$line);
$version =~ s/^\s//;
($a, $b, $c, $d) = split (/\./,$version);
if ($c == "0" && $d > "8") {
exit 0;
} else {
exit 1;
}
}
}
} else {
exit 1;
}'; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, you need hsqldb >= 1.8.0.9 but < 1.8.1])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_HSQLDB=NO
BUILD_TYPE="$BUILD_TYPE HSQLDB"
fi
AC_SUBST(SYSTEM_HSQLDB)
AC_SUBST(HSQLDB_JAR)
dnl ===================================================================
dnl Check for system beanshell
dnl ===================================================================
ENABLE_BEANSHELL=YES
AC_MSG_CHECKING([which beanshell to use])
if test -n "$with_system_beanshell" -o -n "$with_system_libs" && \
test "$with_system_beanshell" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_BSH=YES
if test -z $BSH_JAR; then
BSH_JAR=/usr/share/java/bsh.jar
fi
AC_CHECK_FILE($BSH_JAR, [],
[AC_MSG_ERROR(bsh.jar not found.)], [])
elif test "x$enable_beanshell" = "xyes"; then
AC_MSG_RESULT([internal])
SYSTEM_BSH=NO
BUILD_TYPE="$BUILD_TYPE BSH"
else
AC_MSG_RESULT([none (disabled)])
SYSTEM_BSH=NO
ENABLE_BEANSHELL=NO
fi
AC_SUBST(SYSTEM_BSH)
AC_SUBST(BSH_JAR)
AC_SUBST(ENABLE_BEANSHELL)
dnl ===================================================================
dnl Check for saxon. It can come from two different places:
dnl - pre-installed on the system. This is checked when the --with-system-saxon
dnl option is given to configure.
dnl The exact place can be specified with the --with-saxon-jar=<path> option.
dnl - From the saxon tar ball in ext_sources/. This is used when --enable-saxon
dnl is given to configure but not any of --with-system-saxon or --with-saxon-jar.
dnl ===================================================================
DISABLE_SAXON=
AC_MSG_CHECKING([which saxon to use])
if test -n "$with_system_saxon" -o -n "$with_system_libs" && \
test "$with_system_saxon" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_SAXON=YES
if test -z $SAXON_JAR; then
AC_CHECK_FILE(/usr/share/java/saxon9.jar,
[ SAXON_JAR=/usr/share/java/saxon9.jar ],
[
AC_CHECK_FILE(/usr/share/java/saxon.jar,
[ SAXON_JAR=/usr/share/java/saxon.jar ],
[ AC_CHECK_FILE(/usr/share/java/saxon9.jar,
[ SAXON_JAR=/usr/share/java/saxon9.jar ],
[ AC_MSG_ERROR(saxon.jar replacement not found)]
)
]
)
]
)
else
AC_CHECK_FILE($SAXON_JAR, [],
[AC_MSG_ERROR(saxon.jar replacement not found.)], [])
fi
if test -n "$SERIALIZER_JAR"; then
AC_CHECK_FILE($SERIALIZER_JAR, [],
[AC_MSG_ERROR(serializer.jar not found.)], [])
AC_SUBST(SERIALIZER_JAR)
fi
dnl Saxon comes in two practically available versions, the out-of-date saxonb which
dnl supports the java extensions that OOo uses, and the up-to-date saxon he
dnl "home edition" version, which is crippled to not support those java extensions.
dnl And as an aside the he one also needs to be tweaked to include
dnl a META-INF/services to broadcast that it supports the jaxp transform factory
AC_MSG_CHECKING([if saxon works])
cat > saxontest.java <<_ACEOF
[import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.stream.StreamSource;
import java.io.*;
import net.sf.saxon.FeatureKeys;
class saxontest {
public static void main(String[] args) {
System.setProperty("javax.xml.transform.TransformerFactory",
"net.sf.saxon.TransformerFactoryImpl");
try {
TransformerFactory tfactory = TransformerFactory.newInstance();
// some external saxons (Debian, Ubuntu, ...) have this disabled
// per default
tfactory.setAttribute(FeatureKeys.ALLOW_EXTERNAL_FUNCTIONS, new Boolean(true));
System.out.println("TransformerFactory is" +
tfactory.getClass().getName());
Transformer transformer = tfactory.newTransformer(
new StreamSource(new File(args[0])));
} catch(Exception e){
e.printStackTrace(System.err);
System.exit(-1);
}
System.exit(0);
}
}
]
_ACEOF
cat > saxontest.xsl<<_ACEOF
[<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<xsl:value-of select="math:sqrt(1)" xmlns:math="java:java.lang.Math"/>
</xsl:template>
</xsl:stylesheet>
]
_ACEOF
javac_cmd="$JAVACOMPILER -cp $SAXON_JAR saxontest.java 1>&2"
AC_TRY_EVAL(javac_cmd)
if test $? = 0 && test -f ./saxontest.class ; then
java_cmd="$JAVAINTERPRETER -cp $SAXON_JAR:. saxontest saxontest.xsl 1>&2"
AC_TRY_EVAL(java_cmd)
if test $? = 0; then
AC_MSG_RESULT([yes])
else
cat saxontest.java >&5
AC_MSG_RESULT([no])
AC_MSG_ERROR([Non-functional saxon jar, e.g. crippled saxon-he instead of saxonb])
fi
else
AC_MSG_RESULT([no])
cat saxontest.java >&5
AC_MSG_ERROR([saxontest could not be compiled, non-functional saxon jar])
fi
elif test "x$enable_saxon" = "xyes"; then
AC_MSG_RESULT([internal])
SYSTEM_SAXON=NO
BUILD_TYPE="$BUILD_TYPE SAXON"
else
AC_MSG_RESULT([none (disabled)])
SYSTEM_SAXON=NO
DISABLE_SAXON=YES
fi
AC_SUBST(SYSTEM_SAXON)
AC_SUBST(SAXON_JAR)
AC_SUBST(DISABLE_SAXON)
dnl ===================================================================
dnl Check for rhino
dnl ===================================================================
ENABLE_JAVASCRIPT=
AC_MSG_CHECKING([whether to enable support for JavaScript])
if test "x$enable_javascript" = "xyes"; then
BUILD_TYPE="$BUILD_TYPE RHINO"
AC_MSG_RESULT([yes])
ENABLE_JAVASCRIPT=YES
else
AC_MSG_RESULT([no])
ENABLE_JAVASCRIPT=NO
fi
AC_SUBST(ENABLE_JAVASCRIPT)
dnl ===================================================================
dnl Check for system apr
dnl ===================================================================
SYSTEM_APR=NO
APR_CFLAGS=
APR_LIBS=
AC_MSG_CHECKING([which libapr to use])
if test "x$with_system_apr" = "xyes" -o -n "$with_system_libs"; then
AC_MSG_RESULT([system])
PKG_CHECK_MODULES([APR], [apr-1 >= 1.0])
SYSTEM_APR=YES
else
AC_MSG_RESULT([internal])
SYSTEM_APR=NO
BUILD_TYPE="$BUILD_TYPE APR"
fi
AC_SUBST(SYSTEM_APR)
AC_SUBST(APR_CFLAGS)
AC_SUBST(APR_LIBS)
dnl ===================================================================
dnl Check for system apr-util
dnl ===================================================================
SYSTEM_APR_UTIL=NO
APR_UTIL_CFLAGS=
APR_UTIL_LIBS=
AC_MSG_CHECKING([which libapr-util to use])
if test "x$with_system_apr_util" = "xyes" -o -n "$with_system_libs"; then
AC_MSG_RESULT([system])
PKG_CHECK_MODULES([APR_UTIL], [apr-util-1 >= 1.0])
SYSTEM_APR_UTIL=YES
else
AC_MSG_RESULT([internal])
SYSTEM_APR_UTIL=NO
BUILD_TYPE="$BUILD_TYPE APR_UTIL"
fi
AC_SUBST(SYSTEM_APR_UTIL)
AC_SUBST(APR_UTIL_CFLAGS)
AC_SUBST(APR_UTIL_LIBS)
dnl ===================================================================
dnl Check for system serf
dnl ===================================================================
SYSTEM_SERF=NO
SERF_CFLAGS=
SERF_LIBS=
AC_MSG_CHECKING([which libserf to use])
if test -n "$with_system_serf" -o -n "$with_system_libs" && \
test "$with_system_serf" != "no"; then
AC_MSG_RESULT([system])
PKG_CHECK_MODULES([SERF], [serf-1 >= 1.1])
SYSTEM_SERF=YES
else
AC_MSG_RESULT([internal])
SYSTEM_SERF=NO
BUILD_TYPE="$BUILD_TYPE SERF"
fi
AC_SUBST(SYSTEM_SERF)
AC_SUBST(SERF_CFLAGS)
AC_SUBST(SERF_LIBS)
dnl ===================================================================
dnl Check for CoinMP
dnl ===================================================================
ENABLE_COINMP=
SYSTEM_COINMP=NO
COINMP_CFLAGS=
COINMP_LIBS=
AC_MSG_CHECKING([whether to enable support for CoinMP])
if test "x$enable_coinmp" = "xyes"; then
BUILD_TYPE="$BUILD_TYPE COINMP"
AC_MSG_RESULT([yes])
ENABLE_COINMP=YES
dnl Check wether to use system or internal CoinMP
AC_MSG_CHECKING([which coinmp to use])
if test "x$with_system_coinmp" = "xyes" -o -n "$with_system_libs"; then
AC_MSG_RESULT([system])
PKG_CHECK_MODULES([COINMP], [coinmp])
SYSTEM_COINMP=YES
# some systems need this. Like Ubuntu....
AC_CHECK_LIB(m, floor)
AC_CHECK_LIB(dl, dlopen)
else
AC_MSG_RESULT([internal])
SYSTEM_COINMP=NO
BUILD_TYPE="$BUILD_TYPE COINMP"
fi
else
AC_MSG_RESULT([no])
ENABLE_COINMP=NO
fi
AC_SUBST(ENABLE_COINMP)
AC_SUBST(SYSTEM_COINMP)
AC_SUBST(COINMP_CFLAGS)
AC_SUBST(COINMP_LIBS)
dnl ===================================================================
dnl Check for system curl
dnl ===================================================================
if test "$_os" = "Darwin" && test "$with_system_curl" != "no"; then
with_system_curl=yes
fi
AC_MSG_CHECKING([which curl to use])
if test -n "$with_system_curl" -o -n "$with_system_libs" && \
test "$with_system_curl" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_CURL=YES
AC_PATH_PROG( CURLCONFIG, curl-config)
if test -z "$CURLCONFIG"; then
AC_MSG_ERROR([install curl to run this script])
fi
# check curl version
AC_MSG_CHECKING([whether curl is >= 7.13.1])
if test "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $1 }'`" -gt "7" -a \
"`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $2 }'`" -gt "13" -a \
"`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $3 }'`" -gt "1"; then
AC_MSG_ERROR([no, you need at least curl 7.13,1])
else
AC_MSG_RESULT([yes])
fi
CURL_LIBS=`$CURLCONFIG --libs`
CURL_CFLAGS=`$CURLCONFIG --cflags`
else
AC_MSG_RESULT([internal])
SYSTEM_CURL=NO
BUILD_TYPE="$BUILD_TYPE CURL"
fi
AC_SUBST(SYSTEM_CURL)
AC_SUBST(CURL_CFLAGS)
AC_SUBST(CURL_LIBS)
dnl ===================================================================
dnl Check for system mdds
dnl ===================================================================
AC_MSG_CHECKING([which mdds to use])
if test -n "$with_system_mdds" -o -n "$with_system_headers" && \
test "$with_system_mdds" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MDDS=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(mdds/flat_segment_tree.hpp, [],
[AC_MSG_ERROR(mdds/flat_segment_tree.hpp not found. install mdds)], [])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE MDDS"
SYSTEM_MDDS=NO
fi
AC_SUBST(SYSTEM_MDDS)
dnl ===================================================================
dnl Check for system boost
dnl ===================================================================
AC_MSG_CHECKING([which boost to use])
if test -n "$with_system_boost" -o -n "$with_system_headers" && \
test "$with_system_boost" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_BOOST=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(boost/shared_ptr.hpp, [],
[AC_MSG_ERROR(boost/shared_ptr.hpp not found. install boost)], [])
AC_CHECK_HEADER(boost/spirit/include/classic_core.hpp, [],
[AC_MSG_ERROR(boost/spirit/include/classic_core.hpp not found. install boost >= 1.36)], [])
AC_CHECK_HEADER(boost/function.hpp, [],
[AC_MSG_ERROR(boost/function.hpp not found. install boost)], [])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS -fno-exceptions"
AC_MSG_CHECKING([whether boost/function.hpp compiles with -fno-exceptions])
AC_TRY_COMPILE([#include <boost/function.hpp>
], [],
ac_cv_cxx_boost_no_exceptons_broken=no, ac_cv_cxx_boost_no_exceptons_broken=yes)
if test "$ac_cv_cxx_boost_no_exceptons_broken" = "yes"; then
AC_MSG_ERROR([no, see https://bugzilla.redhat.com/show_bug.cgi?id=477131])
else
AC_MSG_RESULT([yes])
fi
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE BOOST"
SYSTEM_BOOST=NO
fi
AC_SUBST(SYSTEM_BOOST)
dnl ===================================================================
dnl Check for system vigra
dnl ===================================================================
AC_MSG_CHECKING([which vigra to use])
if test -n "$with_system_vigra" -o -n "$with_system_headers" && \
test "$with_system_vigra" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_VIGRA=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(vigra/copyimage.hxx, [],
[AC_MSG_ERROR(vigra/copyimage.hxx not found. install vigra)], [])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE VIGRA"
SYSTEM_VIGRA=NO
fi
AC_SUBST(SYSTEM_VIGRA)
dnl ===================================================================
dnl Check for system odbc
dnl ===================================================================
AC_MSG_CHECKING([which odbc headers to use])
if test -n "$with_system_odbc_headers" -o -n "$with_system_headers" && \
test "$with_system_odbc_headers" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_ODBC_HEADERS=YES
AC_CHECK_HEADER(sqlext.h, [],
[AC_MSG_ERROR(odbc not found. install odbc)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_ODBC_HEADERS=NO
BUILD_TYPE="$BUILD_TYPE UNIXODBC"
fi
AC_SUBST(SYSTEM_ODBC_HEADERS)
AC_MSG_CHECKING([whether to build XML Security support])
if test "$enable_nss_module" = "no"; then
AC_MSG_RESULT([no, since NSS disabled but needed])
else
AC_MSG_RESULT([yes])
fi
AC_MSG_CHECKING([whether to build LDAP configuration backend])
if test -z "$enable_ldap" || test "$enable_ldap" = "yes"; then
if test "$with_openldap" = "yes"; then
AC_MSG_RESULT([yes])
WITH_LDAP=YES
else
WITH_LDAP=NO
fi
else
AC_MSG_RESULT([no])
WITH_LDAP=NO
fi
if test "$WITH_LDAP" = "YES"; then
dnl ===================================================================
dnl Test whether we want to use the OpenLDAP LDAP SDK
dnl ===================================================================
AC_MSG_CHECKING([which LDAP SDK to use])
if test -n "$with_openldap" && test "$with_openldap" != "no"; then
AC_MSG_RESULT([OpenLDAP])
WITH_OPENLDAP=YES
AC_CHECK_HEADERS(ldap.h, [],
[AC_MSG_ERROR(ldap.h not found. install openldap libs)], [])
AC_CHECK_LIB(ldap, ldap_simple_bind_s, [],
[AC_MSG_ERROR(openldap lib not found or functional)], [])
# rumours say that OpenLDAP doesn't have that function. I looked and
# it has it. Test for it to be sure
AC_CHECK_LIB(ldap, ldap_set_option, [],
[AC_MSG_ERROR(openldap lib not found or functional)], [])
fi
fi
AC_SUBST(WITH_LDAP)
AC_SUBST(WITH_OPENLDAP)
AC_MSG_CHECKING([whether to build the internal NSS module])
if test "$enable_nss_module" != "no"; then
ENABLE_NSS_MODULE="YES"
BUILD_TYPE="$BUILD_TYPE NSS"
AC_MSG_RESULT([yes])
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for Mozilla build tooling])
if test -z "$MOZILLABUILD" ; then
AC_MSG_ERROR([
Mozilla build tooling not found!
It is required for NSS that is needed for AOO's security facilities.
Either disable NSS using the option --disable-nss-module
or use the --with-mozilla-build option after installing the tool obtained
from http://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32])
else
if test \( "$WITH_MINGWIN" = "yes" \) ; then
if test ! -d "$MOZILLABUILD" ; then
AC_MSG_ERROR([Mozilla build tooling incomplete!])
else
AC_MSG_RESULT([ok])
fi
else
if test ! -d "$MOZILLABUILD/moztools" \
-o ! -d "$MOZILLABUILD/msys" ; then
AC_MSG_ERROR([Mozilla build tooling incomplete!])
else
AC_MSG_RESULT([ok])
fi
fi
fi
fi
else
ENABLE_NSS_MODULE="NO"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_NSS_MODULE)
AC_SUBST(MOZILLABUILD)
AC_SUBST(MOZ_INC)
dnl ===================================================================
dnl Check for system sane
dnl ===================================================================
AC_MSG_CHECKING([which sane header to use])
if test -n "$with_system_sane_header" -o -n "$with_system_headers" && \
test "$with_system_sane_header" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_SANE_HEADER=YES
AC_CHECK_HEADER(sane/sane.h, [],
[AC_MSG_ERROR(sane not found. install sane)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_SANE_HEADER=NO
BUILD_TYPE="$BUILD_TYPE SANE"
fi
AC_SUBST(SYSTEM_SANE_HEADER)
dnl ===================================================================
dnl Check for system icu
dnl ===================================================================
AC_MSG_CHECKING([which icu to use])
if test -n "$with_system_icu" -o -n "$with_system_libs" && \
test "$with_system_icu" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_ICU=YES
AC_LANG_PUSH([C++])
AC_MSG_CHECKING([for unicode/rbbi.h])
AC_TRY_CPP(unicode/rbbi.h, AC_MSG_RESULT([checked.]), AC_MSG_ERROR([icu headers not found.]))
AC_LANG_POP([C++])
AC_PATH_PROG(SYSTEM_GENBRK, genbrk, [], [$PATH:/usr/sbin:/sbin])
if test -z "$SYSTEM_GENBRK"; then
AC_MSG_ERROR([\"genbrk\" not found in \$PATH, install the icu development tool \"genbrk"\])
fi
AC_PATH_PROG(SYSTEM_GENCCODE, genccode, [], [$PATH:/usr/sbin:/sbin])
if test -z "$SYSTEM_GENCCODE"; then
AC_MSG_ERROR([\"genccode\" not found in \$PATH, install the icu development tool \"genccode"\])
fi
AC_PATH_PROG(SYSTEM_GENCMN, gencmn, [], [$PATH:/usr/sbin:/sbin])
if test -z "$SYSTEM_GENCMN"; then
AC_MSG_ERROR([\"gencmn\" not found in \$PATH, install the icu development tool \"gencmn"\])
fi
AC_PATH_PROG( ICUCONFIG, icu-config)
AC_MSG_CHECKING([ICU version])
if test "$_os" = "OS2"; then
ICU_MAJOR=4
else
ICU_VERSION=`$ICUCONFIG --version`
ICU_MAJOR=`$ICUCONFIG --version | cut -d"." -f1`
ICU_MINOR=`$ICUCONFIG --version | cut -d"." -f2`
ICU_MICRO=`$ICUCONFIG --version | cut -d"." -f3`
fi
if test "$ICU_MAJOR" -ge "4"; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not suitable, only >= 4.0 supported currently])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_ICU=NO
BUILD_TYPE="$BUILD_TYPE ICU"
fi
AC_SUBST(SYSTEM_ICU)
AC_SUBST(SYSTEM_GENBRK)
AC_SUBST(SYSTEM_GENCCODE)
AC_SUBST(SYSTEM_GENCMN)
AC_SUBST(ICU_MAJOR)
AC_SUBST(ICU_MINOR)
AC_SUBST(ICU_MICRO)
dnl ===================================================================
dnl Graphite
dnl ===================================================================
ENABLE_GRAPHITE="FALSE"
AC_MSG_CHECKING([whether to enable graphite support])
if test "x$enable_graphite" = "xyes" -a \( "$_os" = "WINNT" -o "$_os" = "Linux" -o "$_os" = "FreeBSD" \) ; then
AC_MSG_RESULT([yes])
ENABLE_GRAPHITE="TRUE"
AC_MSG_CHECKING([which graphite to use])
if test -n "$with_system_graphite" -o -n "$with_system_libs" && \
test "$with_system_graphite" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_GRAPHITE=YES
PKG_CHECK_MODULES( GRAPHITE, silgraphite )
else
AC_MSG_RESULT([internal])
SYSTEM_GRAPHITE=NO
BUILD_TYPE="$BUILD_TYPE GRAPHITE"
fi
else
AC_MSG_RESULT([no])
ENABLE_GRAPHITE="FALSE"
fi
AC_SUBST(ENABLE_GRAPHITE)
AC_SUBST(SYSTEM_GRAPHITE)
AC_SUBST(GRAPHITE_LIBS)
AC_SUBST(GRAPHITE_CFLAGS)
dnl ===================================================================
dnl Checks for libraries.
dnl ===================================================================
dnl Check for Mac OS X native GUI, which may is now required; the X11 build is no longer supported
dnl See if we have the AppKit framework for building with Quartz graphics.
if test "$_os" = "Darwin"; then
if test "x$with_x" = "xyes"; then
AC_MSG_ERROR([X11 build is no longer supported on MacOSX, please use the native aqua build])
else
AC_MSG_CHECKING([for /System/Library/Frameworks/AppKit.framework])
if test -d "/System/Library/Frameworks/AppKit.framework/"; then
AC_MSG_RESULT([yes])
x_includes="no_x_includes"
x_libraries="no_x_libraries"
dnl disable some things used on other Unix versions but not on the aqua build
enable_gtk=no
enable_cups=no
ENABLE_CUPS=""
AC_SUBST(ENABLE_CUPS)
else
AC_MSG_ERROR([No AppKit.framewrok found])
fi
fi
fi
dnl ***************************************
dnl testing for X libraries and includes...
dnl ***************************************
if test "$_os" = "Darwin" -a "x$x_includes" = "xno_x_includes"; then
echo "Do Nothing for _os = Darwin"
dnl Mac OS X using Aqua graphics. Don't check for X11.
:
elif test "$_os" = "OS2" ; then
echo "Do Nothing for _os = OS2. Don't check for X11."
dnl OS/2 uses native graphics. Don't check for X11.
:
elif test "$_os" != "WINNT" ; then
AC_PATH_X
AC_PATH_XTRA
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
if test "x$x_includes" = "x"; then
x_includes="default_x_includes"
fi
if test "x$x_libraries" = "x"; then
x_libraries="default_x_libraries"
fi
dnl The variables $x_libraries and $x_includes are set.
if test -z "$x_libraries"; then
AC_MSG_ERROR([No X libraries found]) # Exit
fi
if test -z "$x_includes"; then
AC_MSG_ERROR([No X includes found]) # Exit
fi
CFLAGS=$X_CFLAGS
LDFLAGS="$X_LDFLAGS $X_LIBS"
AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", [AC_MSG_ERROR([X Development libraries not found])])
dnl Check if the XauDisposeAuth symbol is provided by libXau.
AC_CHECK_LIB(Xau, XauDisposeAuth, XAU_LIBS="-lXau", [])
else
x_includes="no_x_includes"
x_libraries="no_x_libraries"
fi
if test -z "$x_includes"; then
x_includes="no_x_includes"
fi
if test -z "$x_libraries"; then
x_libraries="no_x_libraries"
fi
if test "$x_includes" = "default_x_includes"; then
XINC="/usr/include"
else
XINC="$x_includes"
fi
AC_SUBST(XINC)
if test "$x_libraries" = "default_x_libraries"; then
XLIB=`$PKG_CONFIG --variable=libdir x11`
if test "x$XLIB" = x; then
XLIB="/usr/lib"
fi
else
XLIB="$x_libraries"
fi
AC_SUBST(XLIB)
AC_SUBST(XAU_LIBS)
dnl ===================================================================
dnl Check if fontconfig/fontconfig.h is available
dnl ===================================================================
if test "$ENABLE_FONTCONFIG" = "TRUE" ; then
AC_CHECK_HEADER(fontconfig/fontconfig.h, [],
[AC_MSG_ERROR([fontconfig/fontconfig.h could not be found. libfontconfig1-dev or fontconfig???-devel missing?])], [])
AC_MSG_CHECKING([whether fontconfig is >= 2.2.0])
AC_TRY_RUN([
#include <fontconfig/fontconfig.h>
int main(int argc, char **argv) {
if(FC_MAJOR > 2 || (FC_MAJOR == 2 && FC_MINOR >= 2)) return 0;
else return 1;
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([no, fontconfig >= 2.2.0 needed])])
fi
dnl ===================================================================
dnl Check for system Xrender
dnl ===================================================================
AC_MSG_CHECKING([whether to link to Xrender])
if test -n "$enable_xrender_link" -a "$enable_xrender_link" != "no"; then
AC_MSG_RESULT([yes])
XRENDER_LINK=YES
with_system_xrender_headers=yes
else
AC_MSG_RESULT([no, dynamically open it])
XRENDER_LINK=NO
fi
AC_MSG_CHECKING([which Xrender headers to use])
if test -n "$with_system_xrender_headers" -o -n "$with_system_headers" && \
test "$with_system_xrender_headers" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_XRENDER_HEADERS=YES
AC_CHECK_HEADER(X11/extensions/Xrender.h, [],
[AC_MSG_ERROR(Xrender not found. install X)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_XRENDER_HEADERS=NO
BUILD_TYPE="$BUILD_TYPE X11_EXTENSIONS"
fi
if test "$XRENDER_LINK" = "YES"; then
AC_CHECK_LIB(Xrender, XRenderQueryVersion, [],
[AC_MSG_ERROR(libXrender not found or functional)], [])
fi
AC_SUBST(SYSTEM_XRENDER_HEADERS)
AC_SUBST(XRENDER_LINK)
dnl ===================================================================
dnl Check for XRandr
dnl ===================================================================
AC_MSG_CHECKING([whether to enable RandR support])
if test "$test_randr" = "yes" -a \( "$enable_randr" = "yes" -o "$enable_randr" = "TRUE" \) ; then
if test -z "$enable_randr_link" -o "$enable_randr_link" = "no"; then
XRANDR_DLOPEN="TRUE"
AC_MSG_RESULT([resorting to dlopen libXrandr at runtime])
else
XRANDR_DLOPEN="FALSE"
PKG_CHECK_MODULES(XRANDR, xrandr >= 1.2, ENABLE_RANDR="TRUE", ENABLE_RANDR="")
if test "$ENABLE_RANDR" != "TRUE"; then
AC_CHECK_HEADER(X11/extensions/Xrandr.h, [],
[AC_MSG_ERROR([X11/extensions/Xrandr.h could not be found. X11 dev missing?])], [])
XRANDR_CFLAGS=" "
AC_CHECK_LIB(Xrandr, XRRQueryExtension, [],
[ AC_MSG_ERROR(libXrandr not found or functional) ], [])
XRANDR_LIBS="-lXrandr "
ENABLE_RANDR="TRUE"
AC_MSG_RESULT([enabling RandR support])
fi
fi
else
ENABLE_RANDR=""
AC_MSG_RESULT([no])
fi
AC_SUBST(XRANDR_DLOPEN)
AC_SUBST(XRANDR_CFLAGS)
AC_SUBST(XRANDR_LIBS)
AC_SUBST(ENABLE_RANDR)
dnl ===================================================================
dnl Check for system nss
dnl ===================================================================
AC_MSG_CHECKING([which libnss to use])
if test -n "$with_system_nss" -o -n "$with_system_libs" && test "$with_system_nss" != "no"; then
AC_MSG_RESULT([external])
PKG_CHECK_MODULES( NSS, nss )
SYSTEM_NSS=YES
else
AC_MSG_RESULT([internal])
SYSTEM_NSS=NO
BUILD_TYPE="$BUILD_TYPE NSS"
fi
AC_SUBST(SYSTEM_NSS)
AC_SUBST(NSS_CFLAGS)
AC_SUBST(NSS_LIBS)
dnl ===================================================================
dnl Check for system openssl
dnl ===================================================================
if test "$_os" = "Darwin" && test "$with_system_openssl" != "no"; then
with_system_openssl=yes
fi
AC_MSG_CHECKING([which libssl to use])
if test -n "$with_system_openssl" -o -n "$with_system_libs" && \
test "$with_system_openssl" != "no"; then
AC_MSG_RESULT([external])
# Mac OS builds should get out without extra stuff is the Mac porters'
# wish. And pkg-config is although Xcode ships a .pc for openssl
if test "$_os" = "Darwin" -o "$_os" = "FreeBSD"; then
OPENSSL_CFLAGS=
OPENSSL_LIBS="-lssl -lcrypto"
else
PKG_CHECK_MODULES( OPENSSL, openssl )
fi
SYSTEM_OPENSSL=YES
else
AC_MSG_RESULT([internal])
SYSTEM_OPENSSL=NO
BUILD_TYPE="$BUILD_TYPE OPENSSL"
fi
AC_SUBST(SYSTEM_OPENSSL)
AC_SUBST(OPENSSL_CFLAGS)
AC_SUBST(OPENSSL_LIBS)
dnl ===================================================================
dnl Check for system redland
dnl ===================================================================
AC_MSG_CHECKING([which redland library to use])
if test -n "$with_system_redland" -o -n "$with_system_libs" && \
test "$with_system_redland" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_REDLAND=YES
dnl versions before 1.0.8 write RDF/XML that is useless for ODF (@xml:base)
PKG_CHECK_MODULES(REDLAND, redland >= 1.0.8)
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE REDLAND"
SYSTEM_REDLAND=NO
fi
AC_SUBST(SYSTEM_REDLAND)
AC_SUBST(REDLAND_CFLAGS)
AC_SUBST(REDLAND_LIBS)
dnl ===================================================================
dnl Check for hunspell
dnl ===================================================================
AC_MSG_CHECKING([whether to build the Spell Checking component])
ENABLE_HUNSPELL=
if test "x$enable_hunspell" != "xno" ; then
AC_MSG_CHECKING([which libhunspell to use])
if test -n "$with_system_hunspell" -o -n "$with_system_libs" && \
test "$with_system_hunspell" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_HUNSPELL=YES
AC_LANG_PUSH([C++])
PKG_CHECK_MODULES(HUNSPELL, hunspell, HUNSPELL_PC="TRUE", HUNSPELL_PC="" )
if test "$HUNSPELL_PC" != "TRUE"; then
AC_CHECK_HEADER(hunspell.hxx, [],
[AC_CHECK_HEADER(hunspell/hunspell.hxx, [ HUNSPELL_CFLAGS=-I/usr/include/hunspell ],
[AC_MSG_ERROR(hunspell headers not found.)], [])
], [])
AC_CHECK_LIB(hunspell, main, [],
[ AC_MSG_ERROR(hunspell library not found.) ], [])
HUNSPELL_LIBS=-lhunspell
fi
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
SYSTEM_HUNSPELL=NO
BUILD_TYPE="$BUILD_TYPE HUNSPELL"
fi
ENABLE_HUNSPELL=YES
AC_SUBST(SYSTEM_HUNSPELL)
AC_SUBST(HUNSPELL_CFLAGS)
AC_SUBST(HUNSPELL_LIBS)
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_HUNSPELL)
dnl ===================================================================
dnl Checking for libhyphen
dnl ===================================================================
AC_MSG_CHECKING([whether to build the Hyphenator component])
ENABLE_HYPHEN=
if test "x$enable_hyphen" != "xno" ; then
AC_MSG_CHECKING([which libhyphen to use])
if test -n "$with_system_hyphen" -o -n "$with_system_libs" && \
test "$with_system_hyphen" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_HYPH=YES
AC_CHECK_HEADER(hyphen.h, [],
[ AC_MSG_ERROR(libhyphen headers not found.)], [])
AC_CHECK_MEMBER(struct _HyphenDict.cset, [],
[ AC_MSG_ERROR(no. You are sure you have libhyphen headers?)],
[#include <hyphen.h>])
AC_CHECK_LIB(hyphen, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyphen],
[ AC_MSG_ERROR(libhyphen not found or too old.)], [])
if test -z "$HYPHEN_LIB"; then
AC_CHECK_LIB(hyph, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyph],
[ AC_MSG_ERROR(libhyphen not found or too old.)], [])
fi
if test -z "$HYPHEN_LIB"; then
AC_CHECK_LIB(hnj, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhnj],
[ AC_MSG_ERROR(libhyphen not found or too old.)], [])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_HYPH=NO
BUILD_TYPE="$BUILD_TYPE HYPHEN"
fi
ENABLE_HYPHEN=YES
AC_SUBST(SYSTEM_HYPH)
AC_SUBST(HYPHEN_LIB)
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_HYPHEN)
#dnl ===================================================================
#dnl Check whether we are allowed to bundle dictionaries and whether
#dnl hunspell is available.
#dnl ===================================================================
ENABLE_BUNDLED_DICTIONARIES=
if test "x$enable_bundled_dictionaries" != "xno" -a "x$ENABLE_HUNSPELL" = "xYES"; then
ENABLE_BUNDLED_DICTIONARIES=YES
fi
AC_SUBST(ENABLE_BUNDLED_DICTIONARIES)
dnl ===================================================================
dnl Checking for mythes
dnl ===================================================================
AC_MSG_CHECKING([which mythes to use])
if test -n "$with_system_mythes" -o -n "$with_system_libs" && \
test "$with_system_mythes" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MYTHES=YES
AC_LANG_PUSH([C++])
PKG_CHECK_MODULES(MYTHES, mythes, MYTHES_PKGCONFIG=yes, MYTHES_PKGCONFIG=no)
if test "$MYTHES_PKGCONFIG" = "no"; then
AC_CHECK_HEADER(mythes.hxx, [],
[ AC_MSG_ERROR(mythes.hxx headers not found.)], [])
AC_CHECK_LIB(mythes-1.2, main, [],
[ MYTHES_FOUND=no], [])
if test "$MYTHES_FOUND" = "no"; then
AC_CHECK_LIB(mythes, main, [MYTHES_FOUND=yes],
[ MYTHES_FOUND=no], [])
fi
if test "$MYTHES_FOUND" = "no"; then
AC_MSG_ERROR([mythes library not found!.])
fi
fi
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
SYSTEM_MYTHES=NO
BUILD_TYPE="$BUILD_TYPE MYTHES"
fi
AC_SUBST(SYSTEM_MYTHES)
AC_SUBST(MYTHES_CFLAGS)
AC_SUBST(MYTHES_LIBS)
dnl ===================================================================
dnl Checking for libtextcat
dnl ===================================================================
AC_MSG_CHECKING([which libtextcat to use])
if test -n "$with_system_libtextcat" && test "$with_system_libtextcat" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBTEXTCAT=YES
AC_CHECK_HEADER(libtextcat/textcat.h, [],
[ AC_MSG_ERROR(libtextcat headers not found.)], [])
AC_CHECK_LIB(textcat, special_textcat_Init, ,
[ AC_MSG_ERROR(libtextcat library not found or not suitable. libtextcat typically needs to be patched)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_LIBTEXTCAT=NO
BUILD_TYPE="$BUILD_TYPE LIBTEXTCAT"
fi
AC_SUBST(SYSTEM_LIBTEXTCAT)
AC_MSG_CHECKING([which libtextcat data directory to use])
if test -n "$with_system_libtextcat_data" && test "$with_system_libtextcat_data" != "no"; then
if test "$with_system_libtextcat_data" = "yes"; then
SYSTEM_LIBTEXTCAT_DATA=file:///usr/share/libtextcat
else
SYSTEM_LIBTEXTCAT_DATA=file://$with_system_libtextcat_data
fi
AC_MSG_RESULT([$SYSTEM_LIBTEXTCAT_DATA])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE LIBTEXTCATDATA"
fi
AC_SUBST(SYSTEM_LIBTEXTCAT_DATA)
dnl ***************************************
dnl testing libc version for Linux...
dnl ***************************************
if test "$_os" = "Linux"; then
AC_MSG_CHECKING([whether libc is >= 2.1.1])
exec 6>/dev/null # no output
AC_CHECK_LIB(c, gnu_get_libc_version, HAVE_LIBC=yes; export HAVE_LIBC)
exec 6>&1 # output on again
if test "$HAVE_LIBC"; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, upgrade libc])
fi
fi
if test "$_os" != "WNT"; then
AC_CHECK_FUNCS(getopt, HAVE_GETOPT=YES, [HAVE_GETOPT=NO])
AC_CHECK_FUNCS(readdir_r, HAVE_READDIR_R=YES, [HAVE_READDIR_R=NO])
if test "$HAVE_GETOPT" = "YES" -a "$HAVE_READDIR_R" = "YES"; then
SYSTEM_LIBC=YES
fi
else
HAVE_GETOPT=NO
HAVE_READDIR_R=NO
SYSTEM_LIBC=YES
fi
AC_SUBST(HAVE_GETOPT)
AC_SUBST(HAVE_READDIR_R)
AC_SUBST(SYSTEM_LIBC)
dnl =========================================
dnl Check for the Microsoft Platform SDK.
dnl =========================================
dnl FIXME: I don't know yet if PSDK works with MinGW, keep it until I know better,
dnl and add "-a \( "$WITH_MINGWIN" != "yes" \)" then
if test \( "$_os" = "WINNT" \) ; then
AC_MSG_CHECKING([for PSDK files])
if test -z "$with_psdk_home"; then
# This first line will detect a February 2003 Microsoft Platform SDK
PSDK_HOME=`./oowintool --psdk-home`
# But there might be also an April 2005 PSDK, unfortunately MS changed
# the registry entry. (we prefer the old version!?)
if test -z "$PSDK_HOME"; then
PSDK_HOME=`cat /proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/MicrosoftSDK/InstalledSDKs/*/Install\ Dir 2> /dev/null | tr '\000' '\n' | head -n 1`
fi
# normalize if found
if test -n "$PSDK_HOME"; then
PSDK_HOME=`cygpath -d "$PSDK_HOME"`
PSDK_HOME=`cygpath -u "$PSDK_HOME"`
fi
else
PSDK_HOME=`cygpath -u "$with_psdk_home"`
fi
# Remove a possible trailing backslash
PSDK_HOME=`echo $PSDK_HOME | $SED 's/\/$//'`
# Problem with current PSDK (iz 49865)
if test -f "$PSDK_HOME/Lib/libcp.lib"; then
AC_MSG_ERROR([
Some modules do not build correctly with MS Platform SDK - April 2005
Edition if the library ($PSDK_HOME/Lib/libcp.lib) is found.
Remove/rename/backup that file and restart configure. Details about this
problem can be found in issue 49856.])
fi
# WIndows SDK has different headers
if test \( -f "$PSDK_HOME/Include/adoint.h" \) \
-a \( -f "$PSDK_HOME/Include/SqlUcode.h" \) \
-a \( -f "$PSDK_HOME/Include/usp10.h" \); then
HAVE_PSDK_H="yes"
else
HAVE_PSDK_H="no"
fi
if test -f "$PSDK_HOME/lib/unicows.lib"; then
HAVE_PSDK_LIB="yes"
else
HAVE_PSDK_LIB="no"
fi
if test "$HAVE_PSDK_H" = "no" -o "$HAVE_PSDK_LIB" = "no"; then
AC_MSG_ERROR([Some (all?) PSDK files not found, please check if all needed Platform SDKs
are installed or use --with-psdk-home .])
fi
if test ! -x "$PSDK_HOME/bin/msiinfo.exe" \
-o ! -x "$PSDK_HOME/bin/msidb.exe" \
-o ! -x "$PSDK_HOME/bin/uuidgen.exe" \
-o ! -x "$PSDK_HOME/bin/msitran.exe" ; then
AC_MSG_ERROR([Some (all) files of the Windows Installer SDK are missing, please install.])
fi
AC_MSG_RESULT([SDK files found ...)])
dnl Check if this is the right SDK.
if echo $PSDK_HOME | grep "v6.1" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([Found Windows SDK 6.1 ($PSDK_HOME)])
WINDOWS_VISTA_PSDK=TRUE
elif echo $PSDK_HOME | grep "v6.0" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([Found Windows SDK 6.0 ($PSDK_HOME)])
WINDOWS_VISTA_PSDK=TRUE
elif echo $PSDK_HOME | grep "v7.0" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([Found Windows SDK 7.0 ($PSDK_HOME)])
WINDOWS_VISTA_PSDK=TRUE
else
AC_MSG_RESULT([Found Legacy Windows Platform SDK ($PSDK_HOME)])
fi
fi
AC_SUBST(PSDK_HOME)
AC_SUBST(WINDOWS_VISTA_PSDK)
dnl =========================================
dnl Check for the Microsoft DirectX SDK.
dnl =========================================
if test \( "$_os" = "WINNT" \) ; then
AC_MSG_CHECKING([for DirectX SDK files])
if test -z "$with_directx_home"; then
dnl A standard installation of the DirectX SDK sets $DXSDK_DIR
if test -n "$DXSDK_DIR"; then
DIRECTXSDK_HOME=`cygpath -d "$DXSDK_DIR"`
DIRECTXSDK_HOME=`cygpath -u "$DIRECTXSDK_HOME"`
fi
# At this point $DIRECTXSDK_HOME might still be undefined. This will lead to
# the "DirectX SDK files not found" error later
else
DIRECTXSDK_HOME=`cygpath -u "$with_directx_home"`
fi
# Remove a possible trailing backslash
DIRECTXSDK_HOME=`echo $DIRECTXSDK_HOME | $SED 's/\/$//'`
if test -f "$DIRECTXSDK_HOME/Include/ddraw.h" ; then
HAVE_DIRECTDRAW_H="yes"
else
HAVE_DIRECTDRAW_H="no"
fi
if test -f "$DIRECTXSDK_HOME/Include/d3d9.h" ; then
HAVE_DIRECTXSDK_H="yes"
else
HAVE_DIRECTXSDK_H="no"
fi
# MS changed the location of the libraries with dec 2004 directx sdk
if test -d "$DIRECTXSDK_HOME/lib/x86" ; then
DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib/x86"
else
DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib"
fi
if test -f "$DIRECTXSDK_LIB/ddraw.lib" ; then
HAVE_DIRECTDRAW_LIB="yes"
else
HAVE_DIRECTDRAW_LIB="no"
fi
if test -f "$DIRECTXSDK_LIB/d3d9.lib" ; then
HAVE_DIRECTXSDK_LIB="yes"
else
HAVE_DIRECTXSDK_LIB="no"
fi
if test "$HAVE_DIRECTDRAW_H" = "yes" -a "$HAVE_DIRECTDRAW_LIB" = "yes" ; then
ENABLE_DIRECT_DRAW="TRUE"
fi
if test "$HAVE_DIRECTXSDK_H" = "yes" -a "$HAVE_DIRECTXSDK_LIB" = "yes" ; then
HAVE_DIRECTXSDK="yes"
else
HAVE_DIRECTXSDK="no"
fi
if test -n "$ENABLE_DIRECTX"; then
if test "$HAVE_DIRECTDRAW" = "yes" -o "$HAVE_DIRECTXSDK" = "yes" ; then
AC_MSG_RESULT([found])
else
AC_MSG_ERROR([DirectX SDK files not found, please use --with-directx-home or --disable-directx.])
fi
else
DIRECTXSDK_HOME=""
AC_MSG_RESULT([disabled])
fi
fi
AC_SUBST(ENABLE_DIRECT_DRAW)
AC_SUBST(DIRECTXSDK_HOME)
AC_SUBST(DIRECTXSDK_LIB)
dnl ============================================
dnl Check for ATL and MFC
dnl ============================================
if test \( "$_os" = "WINNT" \) ; then
AC_MSG_CHECKING([for ATL and MFC])
if test "$DISABLE_ATL" = "TRUE"; then
AC_MSG_RESULT([ATL is disabled, nothing to check])
else
AC_MSG_NOTICE([testing ATL/MFC libs and includes])
if test -z "$with_atl_include_dir"; then
ATL_INCLUDE=$COMPATH/atlmfc/include
else
ATL_INCLUDE=`cygpath -u "$with_atl_include_dir"`
fi
if test -z "$with_atl_lib_dir"; then
ATL_LIB=$COMPATH/atlmfc/lib
ATL_LIB_X64=$COMPATH/atlmfc/lib/amd64
else
ATL_LIB=`cygpath -u "$with_atl_lib_dir"`
ATL_LIB_X64=$ATL_LIB/../amd64
fi
if test -z "$with_mfc_include_dir"; then
MFC_INCLUDE=$COMPATH/atlmfc/include
else
MFC_INCLUDE=`cygpath -u "$with_mfc_include_dir"`
fi
if test -z "$with_mfc_lib_dir"; then
MFC_LIB=$COMPATH/atlmfc/lib
else
MFC_LIB=`cygpath -u "$with_mfc_lib_dir"`
fi
ATL_INCLUDE=`echo $ATL_INCLUDE | $SED 's/\/$//'`
ATL_LIB=`echo $ATL_LIB | $SED 's/\/$//'`
ATL_LIB_X64=`echo $ATL_LIB_X64 | $SED 's/\/$//'`
MFC_INCLUDE=`echo $MFC_INCLUDE | $SED 's/\/$//'`
MFC_LIB=`echo $MFC_LIB | $SED 's/\/$//'`
AC_MSG_NOTICE([looking for atlbase.h in "$ATL_INCLUDE"])
if test -f "$ATL_INCLUDE/atlbase.h"; then
HAVE_ATL_H="yes"
else
HAVE_ATL_H="no"
fi
AC_MSG_NOTICE([found atlbase.h in "$ATL_INCLUDE"? "$HAVE_ATL_H"])
AC_MSG_NOTICE([looking for afx.h in "$MFC_INCLUDE"])
if test -f "$MFC_INCLUDE/afx.h"; then
HAVE_MFC_H="yes"
else
HAVE_MFC_H="no"
fi
AC_MSG_NOTICE([found afx.h in "$MFC_INCLUDE"? "$HAVE_MFC_H"])
AC_MSG_NOTICE([looking for atls.lib in "$ATL_LIB"])
if test -f "$ATL_LIB/atls.lib"; then
HAVE_ATL_LIB="yes"
AC_MSG_NOTICE([looking for atlthunk.lib in "$ATL_LIB"])
if test -f "$ATL_LIB/atlthunk.lib"; then
HAVE_ATLTHUNK="YES"
else
HAVE_ATLTHUNK="NO"
fi
AC_MSG_NOTICE([found atlthunk.lib in "$ATL_LIB"? "$HAVE_ATLTHUNK"])
else
HAVE_ATL_LIB="no"
fi
AC_MSG_NOTICE([found atls.lib in "$ATL_LIB"? "$HAVE_ATL_LIB"])
dnl TODO check also MFC libraries, they seem to have diferent names
dnl mfc42.lib mfc90.lib
if test -d "$MFC_LIB"; then
HAVE_MFC_LIB="yes"
else
HAVE_MFC_LIB="no"
fi
if test "$HAVE_ATL_H" = "no" -o "$HAVE_MFC_H" = "no" -o "$HAVE_ATL_LIB" = "no" -o "$HAVE_MFC_LIB" = "no"; then
ATL_INCLUDE=
ATL_LIB=
ATL_LIB_X64=
MFC_INCLUDE=
MFC_LIB=
HAVE_ATL_LIB=
dnl TODO shouldn't this be an error?
DISABLE_ACTIVEX="TRUE"
DISABLE_ATL="TRUE"
AC_MSG_RESULT([ATL/MFC disabled])
else
ATL_INCLUDE=`cygpath -dm "$ATL_INCLUDE"`
ATL_LIB=`cygpath -dm "$ATL_LIB"`
ATL_LIB_X64=`cygpath -dm "$ATL_LIB_X64"`
MFC_INCLUDE=`cygpath -dm "$MFC_INCLUDE"`
MFC_LIB=`cygpath -dm "$MFC_LIB"`
AC_MSG_RESULT([ATL/MFC enabled])
fi
fi
fi
AC_SUBST(ATL_INCLUDE)
AC_SUBST(ATL_LIB)
AC_SUBST(ATL_LIB_X64)
AC_SUBST(HAVE_ATLTHUNK)
AC_SUBST(MFC_INCLUDE)
AC_SUBST(MFC_LIB)
dnl ============================================
dnl Check for Nullsoft Scriptable Install System
dnl ============================================
NSIS_PATH=""
if test "$_os" = "WINNT" ; then
AC_MSG_CHECKING([for NSIS])
AC_PATH_PROG(NSIS_PATH, nsis.exe)
if test -n "$NSIS_PATH"; then
NSIS_PATH=`dirname "$NSIS_PATH"`
fi
if test -n "$with_nsis_path"; then
with_nsis_path=`cygpath -u "$with_nsis_path"`
fi
if test -e "$with_nsis_path/nsis.exe"; then
NSIS_PATH="$with_nsis_path"
fi
nsistest=`./oowintool --nsis-dir`;
if test -x "$nsistest/nsis.exe"; then
NSIS_PATH="$nsistest"
fi
if test -z "$NSIS_PATH"; then
AC_MSG_WARN([NSIS not found, no self contained installer will be build.])
echo "NSIS not found, no self contained installer will be build." >> warn
else
NSIS_PATH=`cygpath -d "$NSIS_PATH"`
NSIS_PATH=`cygpath -u "$NSIS_PATH"`
AC_MSG_RESULT([found ($NSIS_PATH)])
fi
fi
AC_SUBST(NSIS_PATH)
dnl ***************************************
dnl testing bison and flex exist
dnl ***************************************
AC_PATH_PROG(BISON, bison)
if test -z "$BISON"; then
AC_MSG_ERROR([no bison found in \$PATH, install bison])
else
AC_MSG_CHECKING([the bison version])
_bison_version=`$BISON --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`;
_bison_longver=`echo $_bison_version | $AWK -F. '{ print \$1*1000+\$2}'`
# Accept newer than 1.875 or older(equal) than 1.75
if test "$_bison_longver" -ge 1875 -o "$_bison_longver" -le 1075; then
if test "$_bison_version" = "1.875" ; then
AC_MSG_WARN([suspect ($BISON $_bison_version)])
echo "Suspect ($BISON $_bison_version) suggest upgrade" >> warn
else
AC_MSG_RESULT([checked ($BISON $_bison_version)])
fi
else
AC_MSG_ERROR([failed ($BISON $_bison_version need 1.875+ (or 1.75 and older))])
fi
fi
AC_PATH_PROG(FLEX, flex)
if test -z "$FLEX"; then
AC_MSG_ERROR([no flex found in \$PATH, install flex])
fi
dnl ***************************************
dnl testing that patch exists
dnl ***************************************
AC_PATH_PROG(PATCH, patch)
if test -z "$PATCH"; then
AC_MSG_ERROR([\"patch\" not found in \$PATH, install the development tool named\"patch"\])
fi
dnl On Solaris, FreeBSD or MacOS X, check if --with-gnu-patch was used
if test "$_os" = "SunOS" -o "$_os" = "FreeBSD" -o "$_os" = "Darwin"; then
if test -z "$with_gnu_patch"; then
GNUPATCH=$PATCH
else
if test -x "$with_gnu_patch"; then
GNUPATCH=$with_gnu_patch
else
AC_MSG_ERROR([--with-gnu-patch did not point to an executable])
fi
fi
AC_MSG_CHECKING([whether $GNUPATCH is GNU patch])
if $GNUPATCH --version | grep "Free Software Foundation" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, GNU patch needed. install or specify with --with-gnu-patch=/path/to/it])
fi
fi
dnl We also need to check for --with-gnu-cp
if test -z "$with_gnu_cp"; then
# check the place where the GNU stuff is hidden on Solaris...
if test -x /usr/gnu/bin/cp; then
GNUCP=/usr/gnu/bin/cp
else
AC_PATH_PROGS(GNUCP, gnucp cp)
fi
if test -z $GNUCP; then
AC_MSG_ERROR([Neither gnucp nor cp found. Install GNU cp and/or specify --with-gnu-cp=/path/to/it])
fi
else
if test -x "$with_gnu_cp"; then
GNUCP=$with_gnu_cp
else
AC_MSG_ERROR([--with-gnu-cp did not point to an executable])
fi
fi
AC_MSG_CHECKING([whether $GNUCP is GNU cp from coreutils with preserve= support])
if $GNUCP --version 2>/dev/null | grep "coreutils" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
GNUCP=''
fi
if test -z "$GNUCP"; then
if test "$_os" = "SunOS"; then
AC_MSG_ERROR([no, GNU cp from coreutils is needed. install or specify with --with-gnu-cp=/path/to/it])
else
AC_MSG_RESULT([no GNU cp from coreutils found - using the system's cp command])
fi
fi
AC_SUBST(GNUPATCH)
AC_SUBST(GNUCP)
dnl ***************************************
dnl testing bash tools path on Windows
dnl ***************************************
if test "$_os" = "WINNT"; then
CYGWIN_PATH=""
AC_PATH_PROG(CYGWIN_PATH, bash)
CYGWIN_PATH=`dirname "$CYGWIN_PATH"`
fi
if test -z "$CYGWIN_PATH"; then
CYGWIN_PATH="NO_CYGWIN"
fi
AC_SUBST(CYGWIN_PATH)
dnl ***************************************
dnl testing ml.exe assembler path
dnl ***************************************
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
AC_MSG_CHECKING([ml.exe assembler path])
if test -n "$with_asm_home"; then
with_asm_home=`cygpath -u "$with_asm_home"`
fi
if test ! -x "$with_asm_home/ml.exe"; then
AC_PATH_PROG(ML_EXE, ml.exe)
if test -z "$ML_EXE"; then
if test -x "$with_cl_home/bin/ml.exe"; then
with_asm_home=$with_cl_home/bin
AC_MSG_RESULT([found ($with_asm_home)])
else
AC_MSG_ERROR([Configure did not find ml.exe assembler.])
fi
else
with_asm_home="ASM_IN_PATH"
fi
fi
AC_MSG_RESULT([$ASM_HOME])
else
with_asm_home="NO_ASM_HOME"
fi
ASM_HOME="$with_asm_home"
AC_SUBST(ASM_HOME)
dnl ===================================================================
dnl testing handle deprecated unzip switch
dnl ===================================================================
if test -z "$with_zip_home"; then
with_zip_home="$with_unzip_home"
fi
dnl ===================================================================
dnl Zip will be found where you tell me to find it
dnl ===================================================================
if test -n "$with_zip_home" ; then
if test "$_os" = "WINNT"; then
with_zip_home=`cygpath -u "$with_zip_home"`
fi
ZIP="$with_zip_home/zip"
UNZIP="$with_zip_home/unzip"
ZIP_HOME="$with_zip_home"
else
AC_PATH_PROG(ZIP, zip)
AC_PATH_PROG(UNZIP, unzip)
ZIP_HOME=`dirname "$ZIP"`
fi
dnl ===================================================================
dnl Zip must be available or else it is an error, all platforms
dnl ===================================================================
if test -z "$ZIP" -o -z "$UNZIP"; then
AC_MSG_ERROR([Zip/Unzip are required to build, please install or use --with-zip-home],,)
fi
dnl ===================================================================
dnl Zip must be a specific type for different build types.
dnl ===================================================================
if test "$_os" = "WINNT"; then
if test -n "`$ZIP -h | grep -i WinNT`" ; then
AC_MSG_ERROR([$ZIP found in the path is not the required cygwin version of Info-ZIPs zip.exe.])
fi
fi
AC_SUBST(ZIP_HOME)
dnl ===================================================================
dnl Windows builds need dbghelp.dll in external/dbghelp/
dnl ===================================================================
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for dbghelp.dll])
if test -x ./external/dbghelp/dbghelp.dll; then
AC_MSG_RESULT([found and executable])
else
AC_MSG_ERROR([dbghelp.dll is missing in external/dbghelp/.
Get it from the Microsoft site and put it into external/dbghelp.
(Note: Microsoft seems to enjoy changing the exact location of this file. You
may have to search Microsoft's website.) Last time it was seen at:
<http://www.microsoft.com/downloads/release.asp?releaseid=30682>.])
fi
fi
dnl ===================================================================
dnl Windows builds need vcredist_x*.exe in external/vcredist/
dnl ===================================================================
WITH_VC_REDIST=""
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for vcredist_x86.exe])
if test -x ./external/vcredist/vcredist_x86.exe; then
AC_MSG_RESULT([found and executable])
else
AC_MSG_ERROR([ vcredist_x86.exe is missing in external/vcredist/.
Get it from the Microsoft site and put it into external/vcredist. You can try
to download it from http://www.microsoft.com/download/en/search.aspx?q=redistributable%20package.])
fi
AC_MSG_CHECKING([for vcredist_x64.exe])
if test -x ./external/vcredist/vcredist_x64.exe; then
AC_MSG_RESULT([found and executable])
else
AC_MSG_ERROR([ vcredist_x64.exe is missing in external/vcredist/.
Get it from the Microsoft site and put it into external/vcredist. You can try
to download it from http://www.microsoft.com/download/en/search.aspx?q=redistributable%20package.])
fi
WITH_VC_REDIST=YES
AC_SUBST(WITH_VC_REDIST)
fi
dnl ===================================================================
dnl Windows builds - use oowintool to copy CRT dlls and manifest
dnl ===================================================================
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
if ./oowintool --msvc-copy-dlls ./external/msvcp ; then
:
else
AC_MSG_ERROR([oowintool failed to copy CRT])
fi
fi
dnl ===================================================================
dnl Windows builds need gdiplus.dll in external/gdiplus/
dnl ===================================================================
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for gdiplus.dll])
if test -x ./external/gdiplus/gdiplus.dll; then
AC_MSG_RESULT([found and executable])
else
AC_MSG_ERROR([gdiplus.dll is missing in external/gdiplus/.
Get it from the Microsoft site and put it into external/gdiplus.
You may have to search Microsoft's website. Last time it was seen at:
<http://www.microsoft.com/downloads/details.aspx?familyid=6A63AB9C-DF12-4D41-933C-BE590FEAA05A&displaylang=en>.])
fi
fi
dnl ===================================================================
dnl Windows builds need msvcr100.dll in external/msvcp100/
dnl ===================================================================
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for msvcr100.dll])
if test -x ./external/msvcp100/msvcr100.dll; then
AC_MSG_RESULT([found and executable])
else
AC_MSG_ERROR([msvcr100.dll is missing in external/msvcp100/.
Get it from the Microsoft Visual C++ 2010 Redistributable Package (x86),
from the Microsoft site and put it into external/msvcp100.
You may have to search Microsoft's website. Last time it was seen at:
<http://www.microsoft.com/en-us/download/search.aspx?q=Microsoft+Visual+C%2b%2b+2010+Redistributable>.])
fi
fi
dnl ===================================================================
dnl Test which vclplugs have to be built.
dnl ===================================================================
AC_MSG_CHECKING([which VCLplugs shall be built])
ENABLE_GTK=""
if test "x$enable_gtk" = "xyes"; then
ENABLE_GTK="TRUE"
R="gtk"
fi
AC_SUBST(ENABLE_GTK)
ENABLE_KDE=""
if test "x$enable_kde" = "xyes"; then
ENABLE_KDE="TRUE"
R="$R kde"
fi
AC_SUBST(ENABLE_KDE)
ENABLE_KDE4=""
if test "x$enable_kde4" = "xyes"; then
ENABLE_KDE4="TRUE"
R="$R kde4"
fi
AC_SUBST(ENABLE_KDE4)
if test -z "$R"; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([$R])
fi
dnl ===================================================================
dnl GCONF check
dnl ===================================================================
ENABLE_GCONF=""
AC_MSG_CHECKING([whether to enable GConf support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$_os" != "OS2" -a "$enable_gconf" = "yes"; then
ENABLE_GCONF="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GCONF, gconf-2.0 )
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_GCONF)
dnl ===================================================================
dnl Gnome VFS check
dnl ===================================================================
ENABLE_GNOMEVFS=""
AC_MSG_CHECKING([whether to enable GNOME VFS support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gnome_vfs" = "yes"; then
ENABLE_GNOMEVFS="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GNOMEVFS, gnome-vfs-2.0 >= 2.6.0 )
if test "$ENABLE_GCONF" != "TRUE"; then
PKG_CHECK_MODULES( GCONF, gconf-2.0 )
fi
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_GNOMEVFS)
dnl ===================================================================
dnl Check whether the gtk 2.0 libraries are available.
dnl ===================================================================
GTK_CFLAGS=""
GTK_LIBS=""
ENABLE_SYSTRAY_GTK=""
ENABLE_DBUS=""
if test "$test_gtk" = "yes"; then
if test "$ENABLE_GTK" = "TRUE" ; then
PKG_CHECK_MODULES(GTK, gtk+-2.0 >= 2.4 gdk-pixbuf-xlib-2.0 >= 2.2 ,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the missing packages]))
PKG_CHECK_MODULES(GTHREAD, gthread-2.0,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the missing packages]))
BUILD_TYPE="$BUILD_TYPE GTK"
if test "x$enable_systray" = "xyes"; then
PKG_CHECK_MODULES(GTK_2_10,gtk+-2.0 >= 2.10.0,
[ENABLE_SYSTRAY_GTK="TRUE"
BUILD_TYPE="$BUILD_TYPE SYSTRAY_GTK"],
[ENABLE_SYSTRAY_GTK=""])
fi
AC_MSG_CHECKING([whether to enable DBUS support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_dbus" = "yes"; then
ENABLE_DBUS="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( DBUS, dbus-glib-1 >= 0.70 )
else
AC_MSG_RESULT([no])
fi
AC_MSG_CHECKING([whether to enable GIO support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gio" = "yes"; then
if test "$ENABLE_GNOMEVFS" = "TRUE" ; then
AC_MSG_ERROR([please use --enable-gio only together with --disable-gnome-vfs.])
fi
ENABLE_GIO="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GIO, gio-2.0 )
else
AC_MSG_RESULT([no])
fi
fi
fi
AC_SUBST(ENABLE_GIO)
AC_SUBST(ENABLE_DBUS)
AC_SUBST(ENABLE_SYSTRAY_GTK)
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
AC_SUBST(GTHREAD_CFLAGS)
AC_SUBST(GTHREAD_LIBS)
dnl ===================================================================
dnl Check whether the GStreamer libraries are available.
dnl ===================================================================
GSTREAMER_CFLAGS=""
GSTREAMER_LIBS=""
ENABLE_GSTREAMER=""
if test "$test_gstreamer" = "yes"; then
AC_MSG_CHECKING([whether to build the GStreamer media backend])
if test "x$enable_gstreamer" != "xno" ; then
PKG_CHECK_MODULES( GSTREAMER, gtk+-2.0 >= 2.4 gthread-2.0 gstreamer-0.10 gstreamer-interfaces-0.10 ,,AC_MSG_ERROR([requirements to build the GStreamer media backend not met. Do not use --enable-gstreamer or install the missing packages]))
ENABLE_GSTREAMER="TRUE"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(ENABLE_GSTREAMER)
AC_SUBST(GSTREAMER_CFLAGS)
AC_SUBST(GSTREAMER_LIBS)
dnl ===================================================================
dnl Check the ARM target
dnl ===================================================================
if test "$_os" = "Linux" && echo "$build_cpu" | $GREP -q arm; then
# default value
ARM_TARGET=ARMV4T
AC_MSG_CHECKING([which ARM processor optimization to use])
if test "$with_arm_target" -lt "6"; then
ARM_TARGET=ARMV4T
elif test "$with_arm_target" = "6"; then
ARM_TARGET=ARMV6
elif test "$with_arm_target" -gt "6"; then
ARM_TARGET=ARMV7
fi
AC_MSG_RESULT([$ARM_TARGET])
AC_SUBST(ARM_TARGET)
fi
dnl ===================================================================
dnl Check whether the Cairo libraries are available.
dnl ===================================================================
ENABLE_CAIRO=""
BUILD_PIXMAN=""
SYSTEM_CAIRO=""
if test "$test_cairo" = "yes"; then
AC_MSG_CHECKING([whether to use cairo])
if test "x$enable_cairo" != "xno" ; then
ENABLE_CAIRO="TRUE"
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([which cairo to use])
if test -n "$with_system_cairo" -o -n "$with_system_libs" && \
test "$with_system_cairo" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_CAIRO=YES
PKG_CHECK_MODULES( CAIRO, cairo >= 1.0.2 )
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$ENABLE_FONTCONFIG" != "TRUE" ; then
AC_MSG_ERROR([Cairo library requires fontconfig.])
fi
if test "$with_system_xrender_headers" = "yes"; then
AC_MSG_CHECKING([whether Xrender.h defines PictStandardA8])
AC_TRY_RUN([
#include <X11/extensions/Xrender.h>
int main(int argc, char **argv) {
#ifdef PictStandardA8
return 0;
#else
return 1;
#endif
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([no, X headers too old.])])
fi
else
BUILD_TYPE="$BUILD_TYPE CAIRO"
dnl === compiler fails on pixman with 64bit architectures...===
if test "$build_cpu" != "x86_64"; then
BUILD_PIXMAN=YES
fi
AC_MSG_RESULT([internal])
fi
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(ENABLE_CAIRO)
AC_SUBST(BUILD_PIXMAN)
AC_SUBST(SYSTEM_CAIRO)
AC_SUBST(CAIRO_CFLAGS)
AC_SUBST(CAIRO_LIBS)
ENABLE_CAIRO_CANVAS="FALSE"
if test "$enable_cairo_canvas" = "yes" -a "$ENABLE_CAIRO" = "TRUE" ; then
ENABLE_CAIRO_CANVAS="TRUE"
fi
AC_SUBST(ENABLE_CAIRO_CANVAS)
dnl ===================================================================
dnl Check whether the OpenGL libraries are available
dnl ===================================================================
AC_MSG_CHECKING([whether to build the OpenGL Transitions component])
ENABLE_OPENGL=
if test "x$enable_opengl" != "xno" ; then
AC_MSG_RESULT([yes])
AC_CHECK_HEADER(GL/gl.h, [],
[AC_MSG_ERROR([OpenGL headers not found])], [])
AC_CHECK_LIB(GL, main, [],
[AC_MSG_ERROR(libGL not installed or functional)], [])
AC_CHECK_LIB(GLU, main, [],
[AC_MSG_ERROR(libGLU not installed or functional)], [])
ENABLE_OPENGL=TRUE
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_OPENGL)
AC_MSG_CHECKING([whether to build the PDF Import extension])
if test -n "$enable_pdfimport" -a "$enable_pdfimport" != "no"; then
AC_MSG_RESULT([yes])
ENABLE_PDFIMPORT=YES
dnl ===================================================================
dnl Check for system poppler
dnl ===================================================================
AC_MSG_CHECKING([whether to use system pdf backend])
if test -n "$with_system_poppler" -o -n "$with_system_libs" && \
test "$with_system_poppler" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_POPPLER=YES
PKG_CHECK_MODULES( POPPLER, poppler >= 0.8.0 )
else
AC_MSG_RESULT([no])
SYSTEM_POPPLER=NO
ENABLE_PDFIMPORT=NO
fi
else
AC_MSG_RESULT([no])
ENABLE_PDFIMPORT=NO
fi
AC_SUBST(ENABLE_PDFIMPORT)
AC_SUBST(SYSTEM_POPPLER)
AC_SUBST(POPPLER_CFLAGS)
AC_SUBST(POPPLER_LIBS)
AC_MSG_CHECKING([whether to build the Wiki Publisher extension])
if test -n "$enable_wiki_publisher" -a "$enable_wiki_publisher" != "no" && test "$WITH_JAVA" != "no"; then
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([for swext module])
if test -d ./swext; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
ENABLE_MEDIAWIKI=YES
BUILD_TYPE="$BUILD_TYPE SWEXT"
else
AC_MSG_RESULT([no])
ENABLE_MEDIAWIKI=NO
fi
AC_SUBST(ENABLE_MEDIAWIKI)
if test "$ENABLE_MEDIAWIKI" = "YES"; then
AC_MSG_CHECKING([which Servlet API Jar to use])
if test -n "$with_system_servlet_api"; then
AC_MSG_RESULT([external])
SYSTEM_SERVLETAPI=YES
if test -z "$SERVLETAPI_JAR"; then
SERVLETAPI_JAR=/usr/share/java/servlet-api.jar
fi
AC_CHECK_FILE($SERVLETAPI_JAR, [],
[AC_MSG_ERROR(servlet-api.jar not found.)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_SERVLETAPI=NO
BUILD_TYPE="$BUILD_TYPE TOMCAT"
fi
fi
AC_SUBST(SYSTEM_SERVLETAPI)
AC_SUBST(SERVLETAPI_JAR)
AC_MSG_CHECKING([whether to build the Report Builder extension])
if test -n "$enable_report_builder" -a "$enable_report_builder" != "no" && test "$WITH_JAVA" != "no"; then
AC_MSG_RESULT([yes])
ENABLE_REPORTBUILDER=YES
SYSTEM_JFREEREPORT=YES
AC_MSG_CHECKING([for reportbuilder module])
if test -d ./reportbuilder; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
AC_MSG_CHECKING([which jfreereport libs to use (for Report Builder extension)])
AC_MSG_RESULT([external])
if test -z $SAC_JAR; then
SAC_JAR=/usr/share/java/sac.jar
fi
AC_CHECK_FILE($SAC_JAR, [],
[AC_MSG_ERROR(sac.jar not found.)], [])
if test -z $LIBXML_JAR; then
AC_CHECK_FILE(/usr/share/java/libxml-1.0.0.jar,
[ LIBXML_JAR=/usr/share/java/libxml-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libxml.jar,
[ LIBXML_JAR=/usr/share/java/libxml.jar ],
[AC_MSG_ERROR(libxml.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBXML_JAR, [],
[AC_MSG_ERROR(libxml.jar not found.)], [])
fi
if test -z $FLUTE_JAR; then
AC_CHECK_FILE(/usr/share/java/flute-1.3.0.jar,
[ FLUTE_JAR=/usr/share/java/flute-1.3.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/flute.jar,
[ FLUTE_JAR=/usr/share/java/flute.jar ],
[ AC_MSG_ERROR(flute-1.3.0.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($FLUTE_JAR, [],
[AC_MSG_ERROR(flute-1.3.0.jar not found.)], [])
fi
if test -z $JFREEREPORT_JAR; then
AC_CHECK_FILE(/usr/share/java/flow-engine-0.9.2.jar,
[ JFREEREPORT_JAR=/usr/share/java/flow-engine-0.9.2.jar ],
[
AC_CHECK_FILE(/usr/share/java/flow-engine.jar,
[ JFREEREPORT_JAR=/usr/share/java/flow-engine.jar ],
[AC_MSG_ERROR(jfreereport.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($JFREEREPORT_JAR, [],
[AC_MSG_ERROR(jfreereport.jar not found.)], [])
fi
if test -z $LIBLAYOUT_JAR; then
AC_CHECK_FILE(/usr/share/java/liblayout-0.2.9.jar,
[ LIBLAYOUT_JAR=/usr/share/java/liblayout-0.2.9.jar ],
[
AC_CHECK_FILE(/usr/share/java/liblayout.jar,
[ LIBLAYOUT_JAR=/usr/share/java/liblayout.jar ],
[AC_MSG_ERROR(liblayout.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBLAYOUT_JAR, [],
[AC_MSG_ERROR(liblayout.jar not found.)], [])
fi
if test -z $LIBLOADER_JAR; then
AC_CHECK_FILE(/usr/share/java/libloader-1.0.0.jar,
[ LIBLOADER_JAR=/usr/share/java/libloader-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libloader.jar,
[ LIBLOADER_JAR=/usr/share/java/libloader.jar ],
[AC_MSG_ERROR(libloader.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBLOADER_JAR, [],
[AC_MSG_ERROR(libloader.jar not found.)], [])
fi
if test -z $LIBFORMULA_JAR; then
AC_CHECK_FILE(/usr/share/java/libformula-0.2.0.jar,
[ LIBFORMULA_JAR=/usr/share/java/libformula-0.2.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libformula.jar,
[ LIBFORMULA_JAR=/usr/share/java/libformula.jar ],
[AC_MSG_ERROR(libformula.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBFORMULA_JAR, [],
[AC_MSG_ERROR(libformula.jar not found.)], [])
fi
if test -z $LIBREPOSITORY_JAR; then
AC_CHECK_FILE(/usr/share/java/librepository-1.0.0.jar,
[ LIBREPOSITORY_JAR=/usr/share/java/librepository-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/librepository.jar,
[ LIBREPOSITORY_JAR=/usr/share/java/librepository.jar ],
[AC_MSG_ERROR(librepository.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBREPOSITORY_JAR, [],
[AC_MSG_ERROR(librepository.jar not found.)], [])
fi
if test -z $LIBFONTS_JAR; then
AC_CHECK_FILE(/usr/share/java/libfonts-1.0.0.jar,
[ LIBFONTS_JAR=/usr/share/java/libfonts-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libfonts.jar,
[ LIBFONTS_JAR=/usr/share/java/libfonts.jar ],
[AC_MSG_ERROR(libfonts.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBFONTS_JAR, [],
[AC_MSG_ERROR(libfonts.jar not found.)], [])
fi
if test -z $LIBSERIALIZER_JAR; then
AC_CHECK_FILE(/usr/share/java/libserializer-1.0.0.jar,
[ LIBSERIALIZER_JAR=/usr/share/java/libserializer-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libserializer.jar,
[ LIBSERIALIZER_JAR=/usr/share/java/libserializer.jar ],
[AC_MSG_ERROR(libserializer.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBSERIALIZER_JAR, [],
[AC_MSG_ERROR(libserializer.jar not found.)], [])
fi
if test -z $LIBBASE_JAR; then
AC_CHECK_FILE(/usr/share/java/libbase-1.0.0.jar,
[ LIBBASE_JAR=/usr/share/java/libbase-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libbase.jar,
[ LIBBASE_JAR=/usr/share/java/libbase.jar ],
[AC_MSG_ERROR(libbase.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBBASE_JAR, [],
[AC_MSG_ERROR(libbase.jar not found.)], [])
fi
BUILD_TYPE="$BUILD_TYPE REPORTBUILDER"
else
AC_MSG_RESULT([no])
ENABLE_REPORTBUILDER=NO
fi
AC_SUBST(ENABLE_REPORTBUILDER)
AC_SUBST(SYSTEM_JFREEREPORT)
AC_SUBST(SAC_JAR)
AC_SUBST(LIBXML_JAR)
AC_SUBST(FLUTE_JAR)
AC_SUBST(JFREEREPORT_JAR)
AC_SUBST(LIBBASE_JAR)
AC_SUBST(LIBLAYOUT_JAR)
AC_SUBST(LIBLOADER_JAR)
AC_SUBST(LIBFORMULA_JAR)
AC_SUBST(LIBREPOSITORY_JAR)
AC_SUBST(LIBFONTS_JAR)
AC_SUBST(LIBSERIALIZER_JAR)
# this has to be here because both the wiki publisher and the SRB use
# commons-logging
if test "$ENABLE_MEDIAWIKI" = "YES" -o "$ENABLE_REPORTBUILDER" = "YES"; then
AC_MSG_CHECKING([which Apache commons-* libs to use])
if test "$with_system_apache_commons" = "yes"; then
SYSTEM_APACHE_COMMONS=YES
AC_MSG_RESULT([external])
if test "$ENABLE_MEDIAWIKI" = "YES"; then
if test -z $COMMONS_CODEC_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-codec-1.6.jar,
[ COMMONS_CODEC_JAR=/usr/share/java/commons-codec-1.6.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-codec.jar,
[ COMMONS_CODEC_JAR=/usr/share/java/commons-codec.jar ],
[AC_MSG_ERROR(commons-codec.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_CODEC_JAR, [],
[AC_MSG_ERROR(commons-codec.jar not found.)], [])
fi
if test -z $COMMONS_LANG_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-lang-2.4.jar,
[ COMMONS_LANG_JAR=/usr/share/java/commons-lang-2.4.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-lang.jar,
[ COMMONS_LANG_JAR=/usr/share/java/commons-lang.jar ],
[AC_MSG_ERROR(commons-lang.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_LANG_JAR, [],
[AC_MSG_ERROR(commons-lang.jar not found.)], [])
fi
if test -z $COMMONS_HTTPCLIENT_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-httpclient-3.1.jar,
[ COMMONS_HTTPCLIENT_JAR=/usr/share/java/commons-httpclient-3.1.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-httpclient.jar,
[ COMMONS_HTTPCLIENT_JAR=/usr/share/java/commons-httpclient.jar ],
[AC_MSG_ERROR(commons-httpclient.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_HTTPCLIENT_JAR, [],
[AC_MSG_ERROR(commons-httpclient.jar not found.)], [])
fi
fi
if test "$ENABLE_MEDIAWIKI" = "YES" -o "$ENABLE_REPORTBUILDER" = "YES"; then
if test -z $COMMONS_LOGGING_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-logging-1.1.1.jar,
[ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging-1.1.1.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-logging.jar,
[ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging.jar ],
[AC_MSG_ERROR(commons-logging.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_LOGGING_JAR, [],
[AC_MSG_ERROR(commons-logging.jar not found.)], [])
fi
fi
else
AC_MSG_RESULT([internal])
SYSTEM_APACHE_COMMONS=NO
BUILD_TYPE="$BUILD_TYPE APACHE_COMMONS TOMCAT"
fi
fi
AC_SUBST(SYSTEM_APACHE_COMMONS)
AC_SUBST(COMMONS_CODEC_JAR)
AC_SUBST(COMMONS_LANG_JAR)
AC_SUBST(COMMONS_HTTPCLIENT_JAR)
AC_SUBST(COMMONS_LOGGING_JAR)
dnl ===================================================================
dnl Check whether the Qt and KDE libraries are available.
dnl ===================================================================
KDE_CFLAGS=""
KDE_LIBS=""
MOC="moc"
if test "$test_kde" = "yes" -a "$ENABLE_KDE" = "TRUE" ; then
dnl Search paths for Qt and KDE
if test "$build_cpu" != "x86_64" ; then
qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib/qt3/include /usr/lib/qt/include /usr/share/qt3/include $x_includes"
qt_libdirs="$QTLIB /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib $x_libraries"
else
qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib64/qt3/include /usr/lib64/qt/include /usr/share/qt3/include /usr/lib/qt3/include /usr/lib/qt/include $x_includes"
qt_libdirs="$QTLIB /usr/local/qt/lib64 /usr/lib64/qt /usr/lib64 /usr/X11R6/lib64/X11/qt /usr/X11R6/lib64/qt /usr/lib64/qt3/lib64 /usr/lib64/qt/lib64 /usr/share/qt3/lib64 /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib $x_libraries"
fi
if test -n "$QTDIR" ; then
qt_incdirs="$QTDIR/include $qt_incdirs"
if test "$build_cpu" != "x86_64" ; then
qt_libdirs="$QTDIR/lib $qt_libdirs"
else
qt_libdirs="$QTDIR/lib64 $QTDIR/lib $qt_libdirs"
fi
fi
if test "$build_cpu" != "x86_64" ; then
kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes"
kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib $x_libraries"
else
kde_incdirs="/usr/lib64/kde/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes"
kde_libdirs="/usr/lib64/kde/lib64 /usr/local/kde/lib64 /usr/kde/lib64 /usr/lib64/kde /usr/lib64/kde3 /usr/X11R6/lib64 /usr/local/lib64 /opt/kde3/lib64 /opt/kde/lib64 /usr/X11R6/kde/lib64 /usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib64 $x_libraries"
fi
if test -n "$KDEDIR" ; then
kde_incdirs="$KDEDIR/include $kde_incdirs"
if test "$build_cpu" != "x86_64" ; then
kde_libdirs="$KDEDIR/lib $kde_libdirs"
else
kde_libdirs="$KDEDIR/lib64 $KDEDIR/lib $kde_libdirs"
fi
fi
dnl What to test
qt_test_include="qstyle.h"
qt_test_library="libqt-mt.so"
kde_test_include="ksharedptr.h"
kde_test_library="libkdeui.so"
dnl Check for Qt headers
AC_MSG_CHECKING([for Qt headers])
qt_incdir="no"
for kde_check in $qt_incdirs ; do
if test -r "$kde_check/$qt_test_include" ; then
qt_incdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$qt_incdir])
if test "x$qt_incdir" = "xno" ; then
AC_MSG_ERROR([Qt headers not found. Please specify the root of
your Qt installation by exporting QTDIR before running "configure".])
fi
dnl Check for Qt libraries
AC_MSG_CHECKING([for Qt libraries])
qt_libdir="no"
for qt_check in $qt_libdirs ; do
if test -r "$qt_check/$qt_test_library" ; then
qt_libdir="$qt_check"
break
fi
done
AC_MSG_RESULT([$qt_libdir])
if test "x$qt_libdir" = "xno" ; then
AC_MSG_ERROR([Qt libraries not found. Please specify the root of
your Qt installation by exporting QTDIR before running "configure".])
fi
dnl Check for Meta Object Compiler
AC_PATH_PROG( MOC, moc, no, [$QTDIR/bin:$PATH] )
if test "$MOC" = "no" ; then
AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify
the root of your Qt installation by exporting QTDIR before running "configure".])
fi
dnl Check for KDE headers
AC_MSG_CHECKING([for KDE headers])
kde_incdir="no"
for kde_check in $kde_incdirs ; do
if test -r "$kde_check/$kde_test_include" ; then
kde_incdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_incdir])
if test "x$kde_incdir" = "xno" ; then
AC_MSG_ERROR([KDE headers not found. Please specify the root of
your KDE installation by exporting KDEDIR before running "configure".])
fi
dnl Check for KDE libraries
AC_MSG_CHECKING([for KDE libraries])
kde_libdir="no"
for kde_check in $kde_libdirs ; do
if test -r "$kde_check/$kde_test_library" ; then
kde_libdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_libdir])
if test "x$kde_libdir" = "xno" ; then
AC_MSG_ERROR([KDE libraries not found. Please specify the root of
your KDE installation by exporting KDEDIR before running "configure".])
fi
dnl Set the variables
KDE_CFLAGS="-I$qt_incdir -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT"
KDE_LIBS="-L$kde_libdir -L$qt_libdir -lkdeui -lkdecore -lqt-mt"
fi
AC_SUBST(KDE_CFLAGS)
AC_SUBST(KDE_LIBS)
AC_SUBST(MOC)
dnl ===================================================================
dnl KDE4 Integration
dnl ===================================================================
KDE4_CFLAGS=""
KDE4_LIBS=""
MOC4="moc"
if test "$test_kde4" = "yes" -a "$ENABLE_KDE4" = "TRUE" ; then
qt_incdirs="$QT4INC $QT4DIR /usr/include/qt4 /usr/include $x_includes"
qt_libdirs="$QT4LIB /usr/lib $x_libraries"
kde_incdirs="/usr/include /usr/include/kde4 $x_includes"
kde_libdirs="/usr/lib /usr/lib/kde4 /usr/lib/kde4/devel $x_libraries"
if test "$build_cpu" = "x86_64" ; then
qt_libdirs="$qt_libdirs /usr/lib64/qt4 /usr/lib64/qt /usr/lib64"
kde_libdirs="$kde_libdirs /usr/lib64 /usr/lib64/kde4 /usr/lib64/kde4/devel"
fi
if test -n "$KDE4DIR" ; then
kde_incdirs="$KDE4DIR/include $kde_incdirs"
if test "$build_cpu" != "x86_64" ; then
kde_libdirs="$KDE4DIR/lib $kde_libdirs"
else
kde_libdirs="$KDE4DIR/lib64 $KDE4DIR/lib $kde_libdirs"
fi
fi
qt_test_include="Qt/qobject.h"
qt_test_library="libQtCore.so"
kde_test_include="ksharedptr.h"
kde_test_library="libkdeui.so"
AC_MSG_CHECKING([for Qt4 headers])
qt_header_dir="no"
for inc_dir in $qt_incdirs ; do
if test -r "$inc_dir/$qt_test_include" ; then
qt_header_dir="$inc_dir"
break
fi
done
AC_MSG_RESULT([$qt_header_dir])
if test "x$qt_header_dir" = "xno" ; then
AC_MSG_ERROR([Qt4 headers not found. Please specify the root of your Qt4 installation by exporting QT4DIR before running "configure".])
fi
AC_MSG_CHECKING([for Qt4 libraries])
qt_lib_dir="no"
for lib_dir in $qt_libdirs ; do
if test -r "$lib_dir/$qt_test_library" ; then
qt_lib_dir="$lib_dir"
break
fi
done
AC_MSG_RESULT([$qt_lib_dir])
if test "x$qt_lib_dir" = "xno" ; then
AC_MSG_ERROR([Qt4 libraries not found. Please specify the root of your Qt4 installation by exporting QT4DIR before running "configure".])
fi
dnl Check for Meta Object Compiler
AC_PATH_PROG( MOCQT4, moc-qt4, no, [$QT4DIR/bin:$PATH] )
MOC4="$MOCQT4"
if test "$MOC4" = "no" ; then
AC_PATH_PROG( MOC4, moc, no, [$PATH:$QT4DIR/bin] )
if test "$MOC4" = "no" ; then
AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify the root of your Qt installation by exporting QT4DIR before running "configure".])
fi
fi
dnl Check for KDE4 headers
AC_MSG_CHECKING([for KDE4 headers])
kde_incdir="no"
for kde_check in $kde_incdirs ; do
if test -r "$kde_check/$kde_test_include" ; then
kde_incdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_incdir])
if test "x$kde_incdir" = "xno" ; then
AC_MSG_ERROR([KDE4 headers not found. Please specify the root of your KDE4 installation by exporting KDE4DIR before running "configure".])
fi
dnl Check for KDE4 libraries
AC_MSG_CHECKING([for KDE4 libraries])
kde_libdir="no"
for kde_check in $kde_libdirs ; do
if test -r "$kde_check/$kde_test_library" ; then
kde_libdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_libdir])
if test "x$kde_libdir" = "xno" ; then
AC_MSG_ERROR([KDE4 libraries not found. Please specify the root of your KDE4 installation by exporting KDE4DIR before running "configure".])
fi
KDE4_CFLAGS="`pkg-config --cflags QtCore` `pkg-config --cflags QtGui` -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT"
KDE4_LIBS="-L$kde_libdir -L$qt_lib_dir -lkdeui -lkdecore -lQtCore -lQtGui"
fi
AC_SUBST(KDE4_CFLAGS)
AC_SUBST(KDE4_LIBS)
AC_SUBST(MOC4)
dnl ===================================================================
dnl Test for the enabling the lockdown pieces
dnl ===================================================================
AC_MSG_CHECKING([whether to enable the lockdown pieces])
ENABLE_LOCKDOWN=""
if test -n "$enable_lockdown" && test "$enable_lockdown" != "no"; then
ENABLE_LOCKDOWN=YES
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_LOCKDOWN)
dnl ===================================================================
dnl Test whether to include Evolution 2 support
dnl ===================================================================
AC_MSG_CHECKING([whether to enable evolution 2 support])
if test "$enable_evolution2" = "yes" -o "$enable_evolution2" = "TRUE"; then
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES(GOBJECT, gobject-2.0)
ENABLE_EVOAB2="TRUE"
else
ENABLE_EVOAB2=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_EVOAB2)
AC_SUBST(GOBJECT_CFLAGS)
AC_SUBST(GOBJECT_LIBS)
dnl ===================================================================
dnl Test whether to include KDE AB support
dnl ===================================================================
AC_MSG_CHECKING([whether to enable KDE address book support])
if test "$enable_kdeab" = "yes" && test "$enable_kde" = "yes"; then
AC_MSG_RESULT([yes])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $KDE_CFLAGS"
AC_MSG_CHECKING([whether KDE is between 3.2 and 3.6])
AC_TRY_RUN([
#include <kdeversion.h>
int main(int argc, char **argv) {
if (KDE_VERSION_MAJOR == 3 && 2 <= KDE_VERSION_MINOR && KDE_VERSION_MINOR <= 6) return 0;
else return 1;
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([KDE version too old or too recent, please use another version of KDE or disable KDE address book support])])
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
ENABLE_KAB=TRUE
else
AC_MSG_RESULT([no])
ENABLE_KAB=
fi
AC_SUBST(ENABLE_KAB)
dnl ===================================================================
dnl Test whether to include MathMLDTD
dnl ===================================================================
AC_MSG_CHECKING([whether to include MathMLDTD])
if test -n "$enable_mathmldtd"; then
if test "$enable_mathmldtd" = "no"; then
AC_MSG_RESULT([no])
SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD"
else
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE MATHMLDTD"
fi
else
AC_MSG_RESULT([no])
SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD"
fi
dnl ===================================================================
dnl Test whether to include category-B fonts
dnl ===================================================================
WITH_CATB_FONTS=
AC_MSG_CHECKING([whether to include category B fonts])
if test "x$enable_category_b_fonts" = "xyes" && test "x$with_fonts" != "xno"; then
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE CATB_FONTS"
WITH_CATB_FONTS=YES
SCPDEFS="$SCPDEFS -DWITH_CATB_FONTS"
else
AC_MSG_RESULT([no])
WITH_CATB_FONTS=NO
fi
dnl ===================================================================
dnl Test whether to include category-A fonts
dnl ===================================================================
WITH_CATA_FONTS=
AC_MSG_CHECKING([whether to include category A fonts])
if test "x$with_fonts" != "xno" ; then
AC_MSG_RESULT([yes])
WITH_CATA_FONTS=YES
SCPDEFS="$SCPDEFS -DWITH_CATA_FONTS"
else
AC_MSG_RESULT([no])
WITH_CATA_FONTS=NO
WITH_CATB_FONTS=NO
fi
WITH_FONTS=NO
AC_MSG_CHECKING([whether any fonts are included])
if test "x$WITH_CATA_FONTS" = "xYES" -o "x$WITH_CATB_FONTS" = "xYES"; then
BUILD_TYPE="$BUILD_TYPE MORE_FONTS"
WITH_FONTS=YES
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
AC_SUBST(WITH_CATA_FONTS)
AC_SUBST(WITH_CATB_FONTS)
AC_SUBST(WITH_FONTS)
dnl ===================================================================
dnl Test whether to include ppds
dnl ===================================================================
AC_MSG_CHECKING([whether to include PPDs])
if test "$with_ppds" != "no"; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
WITHOUT_PPDS=YES
SCPDEFS="$SCPDEFS -DWITHOUT_PPDS"
fi
AC_SUBST(WITHOUT_PPDS)
dnl ===================================================================
dnl Test whether to include afms
dnl ===================================================================
AC_MSG_CHECKING([whether to include AFMs])
if test "$with_afms" != "no"; then
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE AFMS"
else
AC_MSG_RESULT([no])
WITHOUT_AFMS=YES
SCPDEFS="$SCPDEFS -DWITHOUT_AFMS"
fi
AC_SUBST(WITHOUT_AFMS)
AC_SUBST(SCPDEFS)
AC_MSG_CHECKING([whether and how to use Xinerama])
if test "$_os" = "Darwin"; then
USE_XINERAMA=YES
XINERAMA_LINK=dynamic
AC_MSG_RESULT([yes])
elif test "$_os" = "Linux" -o "$_os" = "FreeBSD"; then
if test -e "$XLIB/libXinerama.so" -a -e "$XLIB/libXinerama.a"; then
# we have both versions, let the user decide but use the dynamic one
# per default
USE_XINERAMA=YES
if test -z "$with_static_xinerama" -o -n "$with_system_libs"; then
XINERAMA_LINK=dynamic
else
XINERAMA_LINK=static
fi
elif test -e "$XLIB/libXinerama.so" -a ! -e "$XLIB/libXinerama.a"; then
# we have only the dynamic version
USE_XINERAMA=YES
XINERAMA_LINK=dynamic
elif test -e "$XLIB/libXinerama.a"; then
# static version
if echo $build_cpu | grep -E 'i[[3456]]86' 2>/dev/null >/dev/null; then
USE_XINERAMA=YES
XINERAMA_LINK=static
else
USE_XINERAMA=NO
XINERAMA_LINK=none
fi
else
# no Xinerama
USE_XINERAMA=NO
XINERAMA_LINK=none
fi
if test "$USE_XINERAMA" = "YES"; then
AC_MSG_RESULT([yes, with $XINERAMA_LINK linking])
AC_CHECK_HEADER(X11/extensions/Xinerama.h, [],
[AC_MSG_ERROR(Xinerama header not found.)], [])
XINERAMA_EXTRA_LIBS="-L$XLIB -lXext"
if test "$_os" = "FreeBSD"; then
XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -lXt"
fi
if test "$_os" = "Linux"; then
XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -ldl"
fi
AC_CHECK_LIB(Xinerama, XineramaIsActive, [],
[AC_MSG_ERROR(Xinerama not functional?)], [$XINERAMA_EXTRA_LIBS])
else
AC_MSG_RESULT([no, libXinerama not found or wrong architecture.])
fi
else
AC_MSG_RESULT([no])
fi
AC_SUBST(USE_XINERAMA)
AC_SUBST(XINERAMA_LINK)
dnl ===================================================================
dnl always rely on the system version of gdk-pixbuf
dnl ===================================================================
SYSTEM_GDKPIXBUF=YES
AC_SUBST(SYSTEM_GDKPIXBUF)
dnl ===================================================================
dnl always rely on the system version of glib
dnl ===================================================================
SYSTEM_GLIB=YES
AC_SUBST(SYSTEM_GLIB)
dnl ===================================================================
dnl always rely on the system version of gettext
dnl ===================================================================
SYSTEM_GETTEXT=YES
AC_SUBST(SYSTEM_GETTEXT)
dnl ===================================================================
dnl always rely on the system version of pango
dnl ===================================================================
SYSTEM_PANGO=YES
AC_SUBST(SYSTEM_PANGO)
dnl ===================================================================
dnl Test whether to build libpng or rely on the system version
dnl ===================================================================
AC_MSG_CHECKING([whether to build own version of libpng])
case "$_os" in
WINNT*) # Windows
SYSTEM_LIBPNG=NO
AC_MSG_RESULT([yes])
;;
Darwin*)
SYSTEM_LIBPNG=NO
AC_MSG_RESULT([yes])
;;
*)
SYSTEM_LIBPNG=YES
AC_MSG_RESULT([no])
;;
esac
AC_SUBST(SYSTEM_LIBPNG)
dnl ===================================================================
dnl Test whether to build libjpeg or rely on the system version
dnl ===================================================================
dnl FIXME: this is currently because we have jpeg-6b for our filters
dnl and jpeg-8 as dependency for librsvg
dnl this should be unified into using only one version for both
AC_MSG_CHECKING([whether to build own version of libjpeg])
if test "$SYSTEM_JPEG" = "YES"; then
SYSTEM_LIBJPEG=YES
else
case "$_os" in
WINNT*) # Windows
SYSTEM_LIBJPEG=NO
;;
Darwin*)
SYSTEM_LIBJPEG=NO
;;
*)
SYSTEM_LIBJPEG=YES
;;
esac
fi
if test "$SYSTEM_LIBJPEG" = "YES"; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
fi
AC_SUBST(SYSTEM_LIBJPEG)
dnl ===================================================================
dnl Test whether rat scan was requested and whether apache-rat is available
dnl ===================================================================
RAT_JAR=
AC_MSG_CHECKING([whether to trigger rat scan])
if test -z "$with_rat_scan" -o "$with_rat_scan" = "no"; then
AC_MSG_RESULT([no])
else
if test "$WITH_JAVA" = "no"; then
AC_MSG_ERROR([no, java disabled, enable with --with-java])
elif test "$enable_saxon" = "no"; then
AC_MSG_ERROR([no, saxon disabled, enable with --enable-category-b])
elif test "$with_rat_scan" = "yes"; then
AC_MSG_RESULT([yes, use pre-built library])
RAT_JAR_HOME="BUILD"
BUILD_TYPE="$BUILD_TYPE RAT"
else
AC_MSG_RESULT([yes, use pre-installed library])
AC_MSG_CHECKING([whether apache-rat is available])
if test -d "$with_rat_scan"; then
RAT_JAR_HOME=$with_rat_scan
else
AC_MSG_ERROR([$with_rat_scan is not a directory])
fi
fi
fi
AC_SUBST(RAT_JAR_HOME)
dnl ===================================================================
dnl Test for the presence of Ant and that it works
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
ANT_HOME=; export ANT_HOME
WITH_ANT_HOME=; export WITH_ANT_HOME
if test -z "$with_ant_home"; then
if test "$_os" = "OS2"; then
AC_PATH_PROGS(ANT, ant.cmd)
else
AC_PATH_PROGS(ANT, [jakarta-ant ant ant.sh ant.bat ant.cmd])
fi
else
if test "$_os" = "WINNT"; then
with_ant_home=`cygpath -u "$with_ant_home"`
fi
if test "$_os" = "OS2"; then
AC_PATH_PROGS(ANT, ant.cmd,,$with_ant_home/bin:$PATH)
else
AC_PATH_PROGS(ANT, [jakarta-ant ant ant.sh ant.bat ant.cmd],,$with_ant_home/bin:$PATH)
fi
WITH_ANT_HOME=$with_ant_home
ANT_HOME=$with_ant_home
fi
if test -z "$ANT"; then
AC_MSG_ERROR([Ant not found - Make sure it's in the path or use --with-ant-home])
else
# resolve relative or absolute symlink
while test -h "$ANT"; do
a_cwd=`pwd`
a_basename=`basename "$ANT"`
a_script=`ls -l "$ANT" | sed "s/.*${a_basename} -> //g"`
cd "`dirname "$ANT"`"
cd "`dirname "$a_script"`"
ANT="`pwd`"/"`basename "$a_script"`"
cd "$a_cwd"
done
if test "$_os" = "OS2"; then
ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"`
export ANT_HOME
fi
AC_MSG_CHECKING([if $ANT works])
cat > conftest.java << EOF
public class conftest {
int testmethod(int a, int b) {
return a + b;
}
}
EOF
cat > conftest.xml << EOF
<project name="conftest" default="conftest">
<target name="conftest">
<javac srcdir="." includes="conftest.java">
</javac>
</target>
</project>
EOF
oldJAVA_HOME=$JAVA_HOME
if test "$JAVACISGCJ" = "yes"; then
JAVA_HOME=; export JAVA_HOME
ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2"
else
ant_cmd="$ANT -buildfile conftest.xml 1>&2"
fi
AC_TRY_EVAL(ant_cmd)
if test $? = 0 && test -f ./conftest.class ; then
AC_MSG_RESULT([Ant works])
if test -z "$WITH_ANT_HOME"; then
ANT_HOME=`$ANT -diagnostics | $EGREP "ant.home :" | $SED -e "s#ant.home : ##g"`
if test -z "$ANT_HOME"; then
ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"`
fi
else
ANT_HOME="$WITH_ANT_HOME"
fi
else
echo "configure: Ant test failed" >&5
cat conftest.java >&5
cat conftest.xml >&5
AC_MSG_WARN([Ant does not work - Some Java projects will not build!])
ANT_HOME=""
echo "Ant does not work - Some Java projects will not build!" >>warn
fi
JAVA_HOME=$oldJAVA_HOME
rm -f conftest* core core.* *.core
fi
if test -z "$ANT_HOME"; then
ANT_HOME="NO_ANT_HOME"
fi
AC_SUBST(ANT_HOME)
dnl Checking for ant.jar
if test "$ANT_HOME" != "NO_ANT_HOME"; then
AC_MSG_CHECKING([Ant lib directory])
if test -f $ANT_HOME/lib/ant.jar; then
ANT_LIB="$ANT_HOME/lib"
else
if test -f $ANT_HOME/ant.jar; then
ANT_LIB="$ANT_HOME"
else
if test -f /usr/share/java/ant.jar; then
ANT_LIB=/usr/share/java
else
if test -f /usr/share/ant-core/lib/ant.jar; then
ANT_LIB=/usr/share/ant-core/lib
else
if test -f $ANT_HOME/lib/ant/ant.jar; then
ANT_LIB="$ANT_HOME/lib/ant"
else
if test -f /usr/share/lib/ant/ant.jar; then
ANT_LIB=/usr/share/lib/ant
else
AC_MSG_ERROR([Ant libraries not found!])
fi
fi
fi
fi
fi
fi
AC_MSG_RESULT([Ant lib directory found.])
fi
AC_SUBST(ANT_LIB)
fi
ant_minver=1.6.0
# update for more extensions...
if test "$ENABLE_MEDIAWIKI" = "YES"; then
ant_minver=1.7.0
fi
ant_minminor1=`echo $ant_minver | cut -d"." -f2`
AC_MSG_CHECKING([whether ant is >= $ant_minver])
ant_version=`$ANT -version | $AWK '{ print $4; }'`
ant_version_major=`echo $ant_version | cut -d. -f1`
ant_version_minor=`echo $ant_version | cut -d. -f2`
echo "configure: ant_version $ant_version " >&5
echo "configure: ant_version_major $ant_version_major " >&5
echo "configure: ant_version_minor $ant_version_minor " >&5
if test "$ant_version_major" -ge "2"; then
AC_MSG_RESULT([yes, $ant_version])
elif test "$ant_version_major" = "1" && test "$ant_version_minor" -ge "$ant_minminor1"; then
AC_MSG_RESULT([yes, $ant_version])
else
AC_MSG_ERROR([no, you need at least ant >= $ant_minver])
fi
if test "$ENABLE_MEDIAWIKI" = "YES"; then
AC_MSG_CHECKING([whether ant supports mapper type="regexp"])
rm -rf confdir
mkdir confdir
cat > conftest.java << EOF
public class conftest {
int testmethod(int a, int b) {
return a + b;
}
}
EOF
cat > conftest.xml << EOF
<project name="conftest" default="conftest">
<target name="conftest" depends="copytest">
<javac srcdir="." includes="conftest.java">
</javac>
</target>
<target name="copytest">
<copy todir="confdir">
<fileset dir="confdir" includes="**/*.abc" casesensitive="yes"/>
<filterset/>
<mapper type="regexp" from="^(.*[/\\])foo([/\\].*)" to="\1baa\2"/>
</copy>
</target>
</project>
EOF
if test "$JAVACISGCJ" = "yes"; then
JAVA_HOME=; export JAVA_HOME
ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2"
else
ant_cmd="$ANT -buildfile conftest.xml 1>&2"
fi
AC_TRY_EVAL(ant_cmd)
if test $? = 0 && test -f ./conftest.class ; then
AC_MSG_RESULT([yes])
rm -rf confdir
else
echo "configure: Ant test failed" >&5
cat conftest.java >&5
cat conftest.xml >&5
rm -rf confdir
AC_MSG_ERROR([no. Did you install ant-apache-regexp?])
fi
fi
rm -f conftest* core core.* *.core
OOO_JUNIT_JAR=
if test "$SOLAR_JAVA" != "" && test "$with_junit" != "no"; then
AC_MSG_CHECKING([for JUnit 4])
if test "$with_junit" = "yes"; then
if test -e /usr/share/java/junit4.jar; then
OOO_JUNIT_JAR=/usr/share/java/junit4.jar
else
if test -e /usr/share/lib/java/junit.jar; then
OOO_JUNIT_JAR=/usr/share/lib/java/junit.jar
else
OOO_JUNIT_JAR=/usr/share/java/junit.jar
fi
fi
else
OOO_JUNIT_JAR=$with_junit
fi
if test "$_os" = "WINNT"; then
OOO_JUNIT_JAR=`cygpath -m "$OOO_JUNIT_JAR"`
fi
"$JAVA_HOME/bin/jar" tf "$OOO_JUNIT_JAR" 2>&5 | \
grep org/junit/Before.class > /dev/null 2>&5
if test $? -eq 0; then
AC_MSG_RESULT([$OOO_JUNIT_JAR])
else
AC_MSG_RESULT([no])
AC_MSG_ERROR([cannot find JUnit 4 jar; please install one in the default
location (/usr/share/java), specify its pathname via
--with-junit=..., or disable it via --without-junit])
fi
fi
AC_SUBST(OOO_JUNIT_JAR)
AC_MSG_CHECKING([which languages to be built])
WITH_LANG="$with_lang"
if test -z "$WITH_LANG"; then
AC_MSG_RESULT([en-US])
else
AC_MSG_RESULT([$WITH_LANG])
ADDITIONAL_REPOSITORIES="$ADDITIONAL_REPOSITORIES ../extras"
BUILD_TYPE="$BUILD_TYPE L10N"
fi
AC_SUBST(WITH_LANG)
AC_MSG_CHECKING([which languages have poor help localizations])
WITH_POOR_HELP_LOCALIZATIONS="$with_poor_help_localizations"
if test -z "$WITH_POOR_HELP_LOCALIZATIONS"; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([$WITH_POOR_HELP_LOCALIZATIONS])
fi
AC_SUBST(WITH_POOR_HELP_LOCALIZATIONS)
AC_MSG_CHECKING([which dictionaries to include])
if test -z "$with_dict"; then
WITH_DICT=,ALL,
AC_MSG_RESULT([ALL])
else
WITH_DICT=","$with_dict","
AC_MSG_RESULT([$with_dict])
fi
AC_SUBST(WITH_DICT)
AC_MSG_CHECKING([for additional 'intro' bitmaps])
INTRO_BITMAPS=
if test -z "$with_intro_bitmaps" -o "$with_intro_bitmaps" = "no" ; then
INTRO_BITMAPS=
AC_MSG_RESULT([none])
else
for bitmap in `echo $with_intro_bitmaps | tr ',' ' '` ; do
case "$bitmap" in
*.bmp) ;;
*) bitmap= ; AC_MSG_WARN([Intro bitmaps should be .bmp files!]) ;;
esac
if test -n "$bitmap" ; then
INTRO_BITMAPS="$INTRO_BITMAPS $bitmap"
fi
done
AC_MSG_RESULT([$INTRO_BITMAPS])
fi
AC_SUBST(INTRO_BITMAPS)
AC_MSG_CHECKING([for additional 'about' bitmaps])
ABOUT_BITMAPS=
if test -z "$with_about_bitmaps" -o "$with_about_bitmaps" = "no" ; then
ABOUT_BITMAPS=
AC_MSG_RESULT([none])
else
for bitmap in `echo $with_about_bitmaps | tr ',' ' '` ; do
case "$bitmap" in
*.bmp) ;;
*) bitmap= ; AC_MSG_WARN([About bitmaps should be .bmp files!]) ;;
esac
if test -n "$bitmap" ; then
ABOUT_BITMAPS="$ABOUT_BITMAPS $bitmap"
fi
done
AC_MSG_RESULT([$ABOUT_BITMAPS])
fi
AC_SUBST(ABOUT_BITMAPS)
OOO_VENDOR=
AC_MSG_CHECKING([for vendor])
if test -z "$with_vendor" -o "$with_vendor" = "no" ; then
AC_MSG_RESULT([not set])
else
OOO_VENDOR="$with_vendor"
AC_MSG_RESULT([$OOO_VENDOR])
fi
AC_SUBST(OOO_VENDOR)
UNIXWRAPPERNAME=
AC_MSG_CHECKING([for UNIX wrapper name])
if test -z "$with_unix_wrapper" -o "$with_unix_wrapper" = "no" -o "$with_unix_wrapper" = "yes" ; then
AC_MSG_RESULT([not set])
else
UNIXWRAPPERNAME="$with_unix_wrapper"
AC_MSG_RESULT([$UNIXWRAPPERNAME])
fi
AC_SUBST(UNIXWRAPPERNAME)
AC_MSG_CHECKING([whether to statically link to Gtk])
if test -n "$enable_static_gtk" && test "$enable_static_gtk" != "no"; then
ENABLE_STATIC_GTK="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_STATIC_GTK="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_STATIC_GTK)
AC_MSG_CHECKING([whether to use layout dialogs])
if test -n "$enable_layout" && test "$enable_layout" != "no"; then
ENABLE_LAYOUT="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_LAYOUT="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_LAYOUT)
# ===================================================================
# De- or increase default verbosity of build process
# ===================================================================
AC_MSG_CHECKING([build verbosity])
if test -n "$enable_verbose"; then
if test "$enable_verbose" = "yes"; then
VERBOSE="TRUE"
AC_MSG_RESULT([high])
fi
if test "$enable_verbose" = "no"; then
VERBOSE="FALSE"
AC_MSG_RESULT([low])
fi
else
AC_MSG_RESULT([not set])
fi
AC_SUBST(VERBOSE)
dnl ===================================================================
dnl Hook up OOos nodep environmental variable to automake's equivalent
dnl --enable-dependency-tracking configure option
dnl ===================================================================
AC_MSG_CHECKING([whether to enable dependency tracking])
if test "$enable_dependency_tracking" = "no"; then
nodep=TRUE
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
fi
AC_SUBST(nodep)
dnl ===================================================================
dnl Setting up the environment.
dnl ===================================================================
echo "********************************************************************"
echo "* *"
echo "* Setting up the build environment variables. *"
echo "* *"
echo "********************************************************************"
if test -z "$COMPATH"; then
AC_MSG_ERROR([No compiler found.])
fi
AC_SUBST(COMPATH)
AC_SUBST(CC_PATH)
AC_MSG_CHECKING([solver path])
if test -z "$with_local_solver"; then
LOCAL_SOLVER="DEFAULT"
AC_MSG_RESULT([default])
else
LOCAL_SOLVER=$with_local_solver
AC_MSG_RESULT([$with_local_solver])
fi
AC_SUBST(LOCAL_SOLVER)
AC_SUBST(BUILD_TYPE)
AC_SUBST(ADDITIONAL_REPOSITORIES)
# make sure config.guess is +x; we execute config.guess, so it has to be so;
chmod +x ./config.guess
# Create files from their *.in templates.
AC_CONFIG_FILES([set_soenv Makefile])
AC_MSG_NOTICE([writing config.status])
AC_OUTPUT
dnl Executing the set_soenv script to setup the environment variables.
chmod a+x set_soenv
if test -z "$enable_check_only"; then
'./set_soenv'
else
echo
echo Test Complete
echo No environment file will be generated
echo
num_warnings=`wc -l warn`
_num=`echo $num_warnings | $AWK '{ print $1 }'`
if test $_num -gt 0; then
echo The following warning\(s\) were generated by configure
echo ----------------------------------------------------
echo
cat warn
echo
else
echo There were no warnings
fi
echo
fi