/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/


// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_chart2.hxx"

#include "WrappedScaleProperty.hxx"
#include "macros.hxx"
#include "CommonConverters.hxx"
#include "AxisHelper.hxx"
#include <com/sun/star/chart2/XAxis.hpp>
#include <com/sun/star/chart/ChartAxisType.hpp>
#include <chartview/ExplicitScaleValues.hxx>

using namespace ::com::sun::star;
using ::com::sun::star::uno::Any;
using namespace ::com::sun::star::chart2;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::Sequence;
using ::rtl::OUString;
using ::com::sun::star::chart::TimeIncrement;

//.............................................................................
namespace chart
{
namespace wrapper
{

WrappedScaleProperty::WrappedScaleProperty( tScaleProperty eScaleProperty
                , ::boost::shared_ptr< Chart2ModelContact > spChart2ModelContact )
            : WrappedProperty(OUString(),OUString())
            , m_spChart2ModelContact( spChart2ModelContact )
            , m_eScaleProperty( eScaleProperty )
{
    switch( m_eScaleProperty )
    {
        case SCALE_PROP_MAX:
            m_aOuterName = C2U("Max");
            break;
        case SCALE_PROP_MIN:
            m_aOuterName = C2U("Min");
            break;
        case SCALE_PROP_ORIGIN:
            m_aOuterName = C2U("Origin");
            break;
        case SCALE_PROP_STEPMAIN:
            m_aOuterName = C2U("StepMain");
            break;
        case SCALE_PROP_STEPHELP:
            m_aOuterName = C2U("StepHelp");
            break;
        case SCALE_PROP_STEPHELP_COUNT:
            m_aOuterName = C2U("StepHelpCount");
            break;
        case SCALE_PROP_AUTO_MAX:
            m_aOuterName = C2U("AutoMax");
            break;
        case SCALE_PROP_AUTO_MIN:
            m_aOuterName = C2U("AutoMin");
            break;
        case SCALE_PROP_AUTO_ORIGIN:
            m_aOuterName = C2U("AutoOrigin");
            break;
        case SCALE_PROP_AUTO_STEPMAIN:
            m_aOuterName = C2U("AutoStepMain");
            break;
        case SCALE_PROP_AUTO_STEPHELP:
            m_aOuterName = C2U("AutoStepHelp");
            break;
        case SCALE_PROP_AXIS_TYPE:
            m_aOuterName = C2U("AxisType");
            break;
        case SCALE_PROP_DATE_INCREMENT:
            m_aOuterName = C2U("TimeIncrement");
            break;
        case SCALE_PROP_EXPLICIT_DATE_INCREMENT:
            m_aOuterName = C2U("ExplicitTimeIncrement");
            break;
        case SCALE_PROP_LOGARITHMIC:
            m_aOuterName = C2U("Logarithmic");
            break;
        case SCALE_PROP_REVERSEDIRECTION:
            m_aOuterName = C2U("ReverseDirection");
            break;
        default:
            OSL_ENSURE(false,"unknown scale property");
            break;
    }
}

WrappedScaleProperty::~WrappedScaleProperty()
{
}

void WrappedScaleProperty::addWrappedProperties( std::vector< WrappedProperty* >& rList
            , ::boost::shared_ptr< Chart2ModelContact > spChart2ModelContact )
{
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_MAX, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_MIN, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_ORIGIN, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_STEPMAIN, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_STEPHELP, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_STEPHELP_COUNT, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_AUTO_MAX, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_AUTO_MIN, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_AUTO_ORIGIN, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_AUTO_STEPMAIN, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_AUTO_STEPHELP, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_AXIS_TYPE, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_DATE_INCREMENT, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_EXPLICIT_DATE_INCREMENT, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_LOGARITHMIC, spChart2ModelContact ) );
    rList.push_back( new WrappedScaleProperty( SCALE_PROP_REVERSEDIRECTION, spChart2ModelContact ) );
}

void WrappedScaleProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const
                throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException)
{
    setPropertyValue( m_eScaleProperty, rOuterValue, xInnerPropertySet );
}

Any WrappedScaleProperty::getPropertyValue( const Reference< beans::XPropertySet >& xInnerPropertySet ) const
                        throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException)
{
    return getPropertyValue( m_eScaleProperty, xInnerPropertySet );
}

void WrappedScaleProperty::setPropertyValue( tScaleProperty eScaleProperty, const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const
                throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException)
{
    m_aOuterValue = rOuterValue;

    Reference< chart2::XAxis > xAxis( xInnerPropertySet, uno::UNO_QUERY );
    OSL_ENSURE(xAxis.is(),"need an XAxis");
    if(!xAxis.is())
        return;

    bool bSetScaleData     = false;

    chart2::ScaleData aScaleData( xAxis->getScaleData() );
    
    sal_Bool bBool = false;
    switch( eScaleProperty )
    {
        case SCALE_PROP_MAX:
        {
            aScaleData.Maximum = rOuterValue;
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_MIN:
        {
            aScaleData.Minimum = rOuterValue;
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_STEPMAIN:
        {
            aScaleData.IncrementData.Distance = rOuterValue;
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_STEPHELP:
        {
            Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
            if( rSubIncrements.getLength() == 0 )
                rSubIncrements.realloc( 1 );

            double fStepMain = 0, fStepHelp = 0;
            if( (rOuterValue >>= fStepHelp) )
            {
                if( AxisHelper::isLogarithmic(aScaleData.Scaling) )
                {
                    sal_Int32 nIntervalCount = static_cast< sal_Int32 >(fStepHelp);
                    rSubIncrements[ 0 ].IntervalCount <<= nIntervalCount;
                }
                else if( (fStepHelp != 0.0) &&
                    (aScaleData.IncrementData.Distance >>= fStepMain) )
                {
                    // approximate interval count
                    sal_Int32 nIntervalCount = static_cast< sal_Int32 >(fStepMain / fStepHelp);
                    rSubIncrements[ 0 ].IntervalCount <<= nIntervalCount;
                }
            }
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_STEPHELP_COUNT:
        {
            Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
            if( rSubIncrements.getLength() == 0 )
                rSubIncrements.realloc( 1 );
            sal_Int32 nIntervalCount=0;
            if( rOuterValue>>=nIntervalCount )
                rSubIncrements[ 0 ].IntervalCount <<= nIntervalCount;
            else
                rSubIncrements[ 0 ].IntervalCount  = Any();
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_AUTO_MAX:
        {
            if( (rOuterValue >>= bBool) && bBool )
                aScaleData.Maximum = Any();
            else
                aScaleData.Maximum = getPropertyValue( SCALE_PROP_MAX, xInnerPropertySet );
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_AUTO_MIN:
        {
            if( (rOuterValue >>= bBool) && bBool )
                aScaleData.Minimum = Any();
            else
                aScaleData.Minimum = getPropertyValue( SCALE_PROP_MIN, xInnerPropertySet );
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_AUTO_STEPMAIN:
        {
            if( (rOuterValue >>= bBool) && bBool )
                aScaleData.IncrementData.Distance = Any();
            else
                aScaleData.IncrementData.Distance = getPropertyValue( SCALE_PROP_STEPMAIN, xInnerPropertySet );
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_AUTO_STEPHELP:
        {
            Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
            if( rSubIncrements.getLength() == 0 )
                rSubIncrements.realloc( 1 );

            if( (rOuterValue >>= bBool) && bBool )
                rSubIncrements[ 0 ].IntervalCount = Any();
            else
                rSubIncrements[ 0 ].IntervalCount = getPropertyValue( SCALE_PROP_STEPHELP_COUNT, xInnerPropertySet );
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_ORIGIN:
        {
            aScaleData.Origin = rOuterValue;
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_AUTO_ORIGIN:
        {
            if( (rOuterValue >>= bBool) && bBool )
                aScaleData.Origin = Any();
            else
                aScaleData.Origin = getPropertyValue( SCALE_PROP_ORIGIN, xInnerPropertySet );
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_AXIS_TYPE:
        {
            sal_Int32 nType = 0;
            if( (rOuterValue >>= nType) )
            {
                if( ::com::sun::star::chart::ChartAxisType::AUTOMATIC == nType )
                {
                    aScaleData.AutoDateAxis = true;
                    if( aScaleData.AxisType == AxisType::DATE )
                        aScaleData.AxisType = AxisType::CATEGORY;
                }
                else if( ::com::sun::star::chart::ChartAxisType::CATEGORY == nType )
                {
                    aScaleData.AutoDateAxis = false;
                    if( aScaleData.AxisType == AxisType::DATE )
                        aScaleData.AxisType = AxisType::CATEGORY;
                }
                else if( ::com::sun::star::chart::ChartAxisType::DATE == nType )
                {
                    if( aScaleData.AxisType == AxisType::CATEGORY )
                        aScaleData.AxisType = AxisType::DATE;
                }
                bSetScaleData = true;
            }
            break;
        }
        case SCALE_PROP_DATE_INCREMENT:
        {
            TimeIncrement aTimeIncrement;
            rOuterValue >>= aTimeIncrement;
            aScaleData.TimeIncrement = aTimeIncrement;
            bSetScaleData = true;
            break;
        }
        case SCALE_PROP_EXPLICIT_DATE_INCREMENT:
            //read only property
            break;
        case SCALE_PROP_LOGARITHMIC:
        {
            if( rOuterValue >>= bBool )
            {
                bool bWasLogarithm = AxisHelper::isLogarithmic( aScaleData.Scaling );
                
                // safe comparison between sal_Bool and bool
                if( (!bBool) != (!bWasLogarithm) )
                {
                    if( bBool )
                        aScaleData.Scaling = AxisHelper::createLogarithmicScaling( 10.0 );
                    else
                        aScaleData.Scaling = 0;
                    bSetScaleData = true;
                }
            }
            break;
        }
        case SCALE_PROP_REVERSEDIRECTION:
        {
            if( rOuterValue >>= bBool )
            {
                bool bWasReverse = ( AxisOrientation_REVERSE == aScaleData.Orientation );
                if( (!bBool) != (!bWasReverse) ) // safe comparison between sal_Bool and bool
                {
                    aScaleData.Orientation = bBool ? AxisOrientation_REVERSE : AxisOrientation_MATHEMATICAL;
                    bSetScaleData = true;
                }
            }
            break;
        }
        default:
        {
            OSL_ENSURE(false,"unknown scale property");
            break;
        }
    }

    if( bSetScaleData )
        xAxis->setScaleData( aScaleData );
}

Any WrappedScaleProperty::getPropertyValue( tScaleProperty eScaleProperty, const Reference< beans::XPropertySet >& xInnerPropertySet ) const
                        throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException)
{
    Any aRet( m_aOuterValue );
    
    Reference< chart2::XAxis > xAxis( xInnerPropertySet, uno::UNO_QUERY );
    OSL_ENSURE(xAxis.is(),"need an XAxis");
    if(!xAxis.is())
        return aRet;
    
    chart2::ScaleData aScaleData( xAxis->getScaleData() );
    
    ExplicitScaleData aExplicitScale;
    ExplicitIncrementData aExplicitIncrement;
        
    switch( eScaleProperty )
    {
        case SCALE_PROP_MAX:
        {
            aRet = aScaleData.Maximum;
            if( !aRet.hasValue() )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis(
                    xAxis, aExplicitScale, aExplicitIncrement );
                aRet <<= aExplicitScale.Maximum;
            }
            break;
        }
        case SCALE_PROP_MIN:
        {
            aRet = aScaleData.Minimum;
            if( !aRet.hasValue() )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis(
                    xAxis, aExplicitScale, aExplicitIncrement );
                aRet <<= aExplicitScale.Minimum;
            }
            break;
        }
        
        case SCALE_PROP_STEPMAIN:
        {
            aRet = aScaleData.IncrementData.Distance;
            if( !aRet.hasValue() )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis(
                    xAxis, aExplicitScale, aExplicitIncrement );
                aRet <<= aExplicitIncrement.Distance;
            }
            break;
        }
        case SCALE_PROP_STEPHELP:
        {
            // todo: evaluate PostEquidistant
            bool bNeedToCalculateExplicitValues = true;

            bool bLogarithmic( AxisHelper::isLogarithmic(aScaleData.Scaling) );
            Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
            if( bLogarithmic )
            {
                if( rSubIncrements.getLength() > 0 )
                {
                    sal_Int32 nIntervalCount = 0;
                    rSubIncrements[ 0 ].IntervalCount >>= nIntervalCount;
                    aRet = uno::makeAny( double(nIntervalCount) );
                    bNeedToCalculateExplicitValues = false;
                }
            }
            else if( aScaleData.IncrementData.Distance.hasValue() )
            {
                if( rSubIncrements.getLength() > 0 )
                {
                    double fStepMain = 0;
                    sal_Int32 nIntervalCount = 0;
                    if( (aScaleData.IncrementData.Distance >>= fStepMain) &&
                        (rSubIncrements[ 0 ].IntervalCount >>= nIntervalCount) &&
                        nIntervalCount > 0 )
                    {
                        aRet <<= ( fStepMain / static_cast< double >( nIntervalCount ) );
                        bNeedToCalculateExplicitValues = false;
                    }
                }
                else
                {
                    aRet = aScaleData.IncrementData.Distance;
                    bNeedToCalculateExplicitValues = false;
                }
            }

            if( bNeedToCalculateExplicitValues )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis(
                    xAxis, aExplicitScale, aExplicitIncrement );
                
                if( !aExplicitIncrement.SubIncrements.empty() &&
                     aExplicitIncrement.SubIncrements[ 0 ].IntervalCount > 0 )
                {
                    if( bLogarithmic )
                    {
                        if( rSubIncrements.getLength() > 0 )
                        {
                            sal_Int32 nIntervalCount = aExplicitIncrement.SubIncrements[ 0 ].IntervalCount;
                            aRet = uno::makeAny( double(nIntervalCount) );
                        }
                    }
                    else
                        aRet <<= ( aExplicitIncrement.Distance /
                                static_cast< double >(
                                    aExplicitIncrement.SubIncrements[ 0 ].IntervalCount ));
                }
                else
                {
                    if( bLogarithmic )
                        aRet <<= 5.0;
                    else
                        aRet <<= aExplicitIncrement.Distance;
                }
            }
            break;
        }
        case SCALE_PROP_STEPHELP_COUNT:
        {
            sal_Int32 nIntervalCount = 0;
            bool bNeedToCalculateExplicitValues = true;
            Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
            if( rSubIncrements.getLength() > 0 )
            {
                if( (rSubIncrements[ 0 ].IntervalCount >>= nIntervalCount) && (nIntervalCount > 0) )
                    bNeedToCalculateExplicitValues = false;
            }
            if( bNeedToCalculateExplicitValues )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis( xAxis, aExplicitScale, aExplicitIncrement );
                if( !aExplicitIncrement.SubIncrements.empty() )
                    nIntervalCount = aExplicitIncrement.SubIncrements[ 0 ].IntervalCount;
            }
            aRet = uno::makeAny( nIntervalCount );
            break;
        }
        case SCALE_PROP_AUTO_MAX:
        {
            aRet <<= (sal_Bool)( !aScaleData.Maximum.hasValue() );
            break;
        }
        case SCALE_PROP_AUTO_MIN:
        {
            aRet <<= (sal_Bool)( !aScaleData.Minimum.hasValue() );
            break;
        }
        case SCALE_PROP_AUTO_STEPMAIN:
        {
            aRet <<= (sal_Bool)( !aScaleData.IncrementData.Distance.hasValue() );
            break;
        }
        case SCALE_PROP_AUTO_STEPHELP:
        {
            Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
            if( rSubIncrements.getLength() > 0 )
                aRet <<= (sal_Bool)( !rSubIncrements[ 0 ].IntervalCount.hasValue() );
            else
                aRet <<= sal_True;
            break;
        }
        case SCALE_PROP_ORIGIN:
        {
            aRet = aScaleData.Origin;
            if( !aRet.hasValue() )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis(
                    xAxis, aExplicitScale, aExplicitIncrement );
                aRet <<= aExplicitScale.Origin;
            }
            break;
        }
        case SCALE_PROP_AUTO_ORIGIN:
        {
            aRet <<= !hasDoubleValue(aScaleData.Origin);
            break;
        }
        case SCALE_PROP_AXIS_TYPE:
        {
            sal_Int32 nType = ::com::sun::star::chart::ChartAxisType::AUTOMATIC;
            if( aScaleData.AxisType == AxisType::DATE )
            {
                nType = ::com::sun::star::chart::ChartAxisType::DATE;
            }
            else if( aScaleData.AxisType == AxisType::CATEGORY )
            {
                if( !aScaleData.AutoDateAxis )
                    nType = ::com::sun::star::chart::ChartAxisType::CATEGORY;
            }
            aRet = uno::makeAny( nType );
            break;
        }
        case SCALE_PROP_DATE_INCREMENT:
        {
            if( aScaleData.AxisType == AxisType::DATE || aScaleData.AutoDateAxis )
                aRet = uno::makeAny( aScaleData.TimeIncrement );
            break;
        }
        case SCALE_PROP_EXPLICIT_DATE_INCREMENT:
        {
            if( aScaleData.AxisType == AxisType::DATE || aScaleData.AutoDateAxis )
            {
                m_spChart2ModelContact->getExplicitValuesForAxis( xAxis, aExplicitScale, aExplicitIncrement );
                if( aExplicitScale.AxisType == AxisType::DATE )
                {
                    TimeIncrement aTimeIncrement;
                    aTimeIncrement.MajorTimeInterval = uno::makeAny( aExplicitIncrement.MajorTimeInterval );
                    aTimeIncrement.MinorTimeInterval = uno::makeAny( aExplicitIncrement.MinorTimeInterval );
                    aTimeIncrement.TimeResolution = uno::makeAny( aExplicitScale.TimeResolution );
                    aRet = uno::makeAny(aTimeIncrement);
                }
            }

            if( aScaleData.AxisType == AxisType::DATE || aScaleData.AutoDateAxis )
                aRet = uno::makeAny( aScaleData.TimeIncrement );
            break;
        }
        case SCALE_PROP_LOGARITHMIC:
        {
            aRet <<= static_cast< sal_Bool >( AxisHelper::isLogarithmic(aScaleData.Scaling) );
            break;
        }
        case SCALE_PROP_REVERSEDIRECTION:
        {
            aRet <<= static_cast< sal_Bool >( AxisOrientation_REVERSE == aScaleData.Orientation );
            break;
        }
        default:
        {
            OSL_ENSURE(false,"unknown scale property");
            break;
        }
    }

    return aRet;
}

} //  namespace wrapper
} //  namespace chart
//.............................................................................