| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_chart2.hxx" |
| #include "DataSeriesPointWrapper.hxx" |
| #include "macros.hxx" |
| #include "RegressionCurveHelper.hxx" |
| #include "Chart2ModelContact.hxx" |
| #include "ChartTypeHelper.hxx" |
| #include "DiagramHelper.hxx" |
| #include "ContainerHelper.hxx" |
| #include "ChartModelHelper.hxx" |
| #include "LineProperties.hxx" |
| #include "FillProperties.hxx" |
| #include "CharacterProperties.hxx" |
| #include "UserDefinedProperties.hxx" |
| #include "WrappedCharacterHeightProperty.hxx" |
| #include "WrappedProperty.hxx" |
| #include "WrappedIgnoreProperty.hxx" |
| #include "WrappedStatisticProperties.hxx" |
| #include "WrappedSymbolProperties.hxx" |
| #include "WrappedDataCaptionProperties.hxx" |
| #include "WrappedSeriesAreaOrLineProperty.hxx" |
| #include "WrappedScaleTextProperties.hxx" |
| #include "WrappedNumberFormatProperty.hxx" |
| #include "WrappedTextRotationProperty.hxx" |
| #include <rtl/ustrbuf.hxx> |
| #include <rtl/math.hxx> |
| // header for define DBG_ASSERT |
| #include <tools/debug.hxx> |
| |
| #include <algorithm> |
| #include <comphelper/InlineContainer.hxx> |
| #include <com/sun/star/beans/PropertyAttribute.hpp> |
| #include <com/sun/star/chart/ChartAxisAssign.hpp> |
| #include <com/sun/star/chart/ChartErrorCategory.hpp> |
| #include <com/sun/star/chart/XChartDocument.hpp> |
| #include <com/sun/star/drawing/FillStyle.hpp> |
| #include <com/sun/star/drawing/LineJoint.hpp> |
| #include <com/sun/star/drawing/LineStyle.hpp> |
| |
| using namespace ::com::sun::star; |
| using namespace ::chart::wrapper; |
| |
| using ::com::sun::star::uno::Reference; |
| using ::com::sun::star::uno::Sequence; |
| using ::com::sun::star::beans::Property; |
| using ::com::sun::star::uno::Any; |
| using ::osl::MutexGuard; |
| |
| namespace |
| { |
| static const ::rtl::OUString lcl_aServiceName( |
| RTL_CONSTASCII_USTRINGPARAM( "com.sun.star.comp.chart.DataSeries" )); |
| |
| enum |
| { |
| //data point properties |
| PROP_SERIES_DATAPOINT_SOLIDTYPE, |
| PROP_SERIES_DATAPOINT_SEGMENT_OFFSET, |
| PROP_SERIES_DATAPOINT_PERCENT_DIAGONAL, |
| PROP_SERIES_DATAPOINT_LABEL_SEPARATOR, |
| PROP_SERIES_NUMBERFORMAT, |
| PROP_SERIES_LINK_NUMBERFORMAT_TO_SOURCE, |
| PROP_SERIES_PERCENTAGE_NUMBERFORMAT, |
| PROP_SERIES_DATAPOINT_LABEL_PLACEMENT, |
| //other series properties |
| PROP_SERIES_ATTACHED_AXIS, |
| PROP_SERIES_DATAPOINT_TEXT_ROTATION |
| }; |
| |
| void lcl_AddPropertiesToVector_PointProperties( |
| ::std::vector< Property > & rOutProperties ) |
| { |
| //service chart::Chart3DBarProperties |
| rOutProperties.push_back( |
| Property( C2U( "SolidType" ), |
| PROP_SERIES_DATAPOINT_SOLIDTYPE, |
| ::getCppuType( reinterpret_cast< sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEDEFAULT )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "SegmentOffset" ), |
| PROP_SERIES_DATAPOINT_SEGMENT_OFFSET, |
| ::getCppuType( reinterpret_cast< sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEDEFAULT )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "D3DPercentDiagonal" ), |
| PROP_SERIES_DATAPOINT_PERCENT_DIAGONAL, |
| ::getCppuType( reinterpret_cast< sal_Int16 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEVOID )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "LabelSeparator" ), |
| PROP_SERIES_DATAPOINT_LABEL_SEPARATOR, |
| ::getCppuType( reinterpret_cast< const ::rtl::OUString * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEDEFAULT )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "NumberFormat" ), |
| PROP_SERIES_NUMBERFORMAT, |
| ::getCppuType( reinterpret_cast< const sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEVOID )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "PercentageNumberFormat" ), |
| PROP_SERIES_PERCENTAGE_NUMBERFORMAT, |
| ::getCppuType( reinterpret_cast< const sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEVOID )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "LabelPlacement" ), |
| PROP_SERIES_DATAPOINT_LABEL_PLACEMENT, |
| ::getCppuType( reinterpret_cast< const sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEVOID )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "TextRotation" ), |
| PROP_SERIES_DATAPOINT_TEXT_ROTATION, |
| ::getCppuType( reinterpret_cast< const sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEDEFAULT )); |
| } |
| |
| void lcl_AddPropertiesToVector_SeriesOnly( |
| ::std::vector< Property > & rOutProperties ) |
| { |
| rOutProperties.push_back( |
| Property( C2U( "Axis" ), |
| PROP_SERIES_ATTACHED_AXIS, |
| ::getCppuType( reinterpret_cast< sal_Int32 * >(0)), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEDEFAULT )); |
| |
| rOutProperties.push_back( |
| Property( C2U( "LinkNumberFormatToSource" ), |
| PROP_SERIES_LINK_NUMBERFORMAT_TO_SOURCE, |
| ::getBooleanCppuType(), |
| beans::PropertyAttribute::BOUND |
| | beans::PropertyAttribute::MAYBEDEFAULT )); |
| } |
| |
| uno::Sequence< Property > lcl_GetPropertySequence( DataSeriesPointWrapper::eType _eType ) |
| { |
| ::std::vector< ::com::sun::star::beans::Property > aProperties; |
| |
| lcl_AddPropertiesToVector_PointProperties( aProperties ); |
| if( _eType == DataSeriesPointWrapper::DATA_SERIES ) |
| { |
| lcl_AddPropertiesToVector_SeriesOnly( aProperties ); |
| WrappedStatisticProperties::addProperties( aProperties ); |
| } |
| WrappedSymbolProperties::addProperties( aProperties ); //for series and points |
| WrappedDataCaptionProperties::addProperties( aProperties ); //for series and points |
| |
| ::chart::FillProperties::AddPropertiesToVector( aProperties ); |
| ::chart::LineProperties::AddPropertiesToVector( aProperties ); |
| ::chart::CharacterProperties::AddPropertiesToVector( aProperties ); |
| ::chart::UserDefinedProperties::AddPropertiesToVector( aProperties ); |
| ::chart::wrapper::WrappedScaleTextProperties::addProperties( aProperties ); |
| |
| ::std::sort( aProperties.begin(), aProperties.end(), ::chart::PropertyNameLess() ); |
| |
| return ::chart::ContainerHelper::ContainerToSequence( aProperties ); |
| } |
| |
| struct StaticSeriesWrapperPropertyArray_Initializer |
| { |
| Sequence< Property >* operator()() |
| { |
| static Sequence< Property > aPropSeq( lcl_GetPropertySequence( DataSeriesPointWrapper::DATA_SERIES ) ); |
| return &aPropSeq; |
| } |
| }; |
| |
| struct StaticSeriesWrapperPropertyArray : public rtl::StaticAggregate< Sequence< Property >, StaticSeriesWrapperPropertyArray_Initializer > |
| { |
| }; |
| |
| struct StaticPointWrapperPropertyArray_Initializer |
| { |
| Sequence< Property >* operator()() |
| { |
| static Sequence< Property > aPropSeq( lcl_GetPropertySequence( DataSeriesPointWrapper::DATA_POINT ) ); |
| return &aPropSeq; |
| } |
| }; |
| |
| struct StaticPointWrapperPropertyArray : public rtl::StaticAggregate< Sequence< Property >, StaticPointWrapperPropertyArray_Initializer > |
| { |
| }; |
| |
| //---------------------------------------------------------------------------------------------------------------------- |
| //---------------------------------------------------------------------------------------------------------------------- |
| //---------------------------------------------------------------------------------------------------------------------- |
| |
| //PROP_SERIES_ATTACHED_AXIS |
| class WrappedAttachedAxisProperty : public ::chart::WrappedProperty |
| { |
| public: |
| WrappedAttachedAxisProperty( ::boost::shared_ptr< Chart2ModelContact > spChart2ModelContact ); |
| virtual ~WrappedAttachedAxisProperty(); |
| |
| virtual void setPropertyValue( const Any& rOuterValue, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet >& xInnerPropertySet ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::beans::PropertyVetoException, ::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); |
| |
| virtual Any getPropertyValue( const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet >& xInnerPropertySet ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); |
| |
| virtual Any getPropertyDefault( const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyState >& xInnerPropertyState ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); |
| |
| protected: |
| ::boost::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; |
| }; |
| |
| WrappedAttachedAxisProperty::WrappedAttachedAxisProperty( |
| ::boost::shared_ptr< Chart2ModelContact > spChart2ModelContact ) |
| : WrappedProperty(C2U("Axis"),rtl::OUString()) |
| , m_spChart2ModelContact( spChart2ModelContact ) |
| { |
| } |
| |
| WrappedAttachedAxisProperty::~WrappedAttachedAxisProperty() |
| { |
| } |
| |
| Any WrappedAttachedAxisProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const |
| throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| Any aRet; |
| aRet <<= ::com::sun::star::chart::ChartAxisAssign::PRIMARY_Y; |
| return aRet; |
| } |
| |
| Any WrappedAttachedAxisProperty::getPropertyValue( const Reference< beans::XPropertySet >& xInnerPropertySet ) const |
| throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| Any aRet; |
| |
| uno::Reference< chart2::XDataSeries > xDataSeries( xInnerPropertySet, uno::UNO_QUERY ); |
| bool bAttachedToMainAxis = ::chart::DiagramHelper::isSeriesAttachedToMainAxis( xDataSeries ); |
| if( bAttachedToMainAxis ) |
| aRet <<= ::com::sun::star::chart::ChartAxisAssign::PRIMARY_Y; |
| else |
| aRet <<= ::com::sun::star::chart::ChartAxisAssign::SECONDARY_Y; |
| return aRet; |
| } |
| |
| void WrappedAttachedAxisProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const |
| throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| uno::Reference< chart2::XDataSeries > xDataSeries( xInnerPropertySet, uno::UNO_QUERY ); |
| |
| sal_Int32 nChartAxisAssign = ::com::sun::star::chart::ChartAxisAssign::PRIMARY_Y; |
| if( ! (rOuterValue >>= nChartAxisAssign) ) |
| throw lang::IllegalArgumentException( C2U("Property Axis requires value of type sal_Int32"), 0, 0 ); |
| |
| bool bNewAttachedToMainAxis = nChartAxisAssign == ::com::sun::star::chart::ChartAxisAssign::PRIMARY_Y; |
| bool bOldAttachedToMainAxis = ::chart::DiagramHelper::isSeriesAttachedToMainAxis( xDataSeries ); |
| |
| if( bNewAttachedToMainAxis != bOldAttachedToMainAxis) |
| { |
| Reference< chart2::XDiagram > xDiagram( m_spChart2ModelContact->getChart2Diagram() ); |
| if( xDiagram.is() ) |
| ::chart::DiagramHelper::attachSeriesToAxis( bNewAttachedToMainAxis, xDataSeries, xDiagram, m_spChart2ModelContact->m_xContext, false ); |
| } |
| } |
| |
| //---------------------------------------------------------------------------------------------------------------------- |
| |
| class WrappedSegmentOffsetProperty : public ::chart::WrappedProperty |
| { |
| public: |
| WrappedSegmentOffsetProperty(); |
| virtual ~WrappedSegmentOffsetProperty(); |
| |
| protected: |
| virtual Any convertInnerToOuterValue( const Any& rInnerValue ) const; |
| virtual Any convertOuterToInnerValue( const Any& rOuterValue ) const; |
| }; |
| |
| WrappedSegmentOffsetProperty::WrappedSegmentOffsetProperty() : |
| WrappedProperty( C2U( "SegmentOffset" ), C2U( "Offset" ) ) |
| {} |
| |
| WrappedSegmentOffsetProperty::~WrappedSegmentOffsetProperty() |
| {} |
| |
| Any WrappedSegmentOffsetProperty::convertInnerToOuterValue( const Any& rInnerValue ) const |
| { |
| // convert new double offset to former integer segment-offset |
| double fOffset = 0; |
| Any aResult( rInnerValue ); |
| |
| if( rInnerValue >>= fOffset ) |
| aResult <<= static_cast< sal_Int32 >( ::rtl::math::round( fOffset * 100.0 )); |
| |
| return aResult; |
| } |
| |
| Any WrappedSegmentOffsetProperty::convertOuterToInnerValue( const Any& rOuterValue ) const |
| { |
| // convert former integer segment-offset to new double offset |
| sal_Int32 nOffset = 0; |
| Any aResult( rOuterValue ); |
| |
| if( rOuterValue >>= nOffset ) |
| aResult <<= (static_cast< double >( nOffset ) / 100.0); |
| |
| return aResult; |
| } |
| |
| //---------------------------------------------------------------------------------------------------------------------- |
| |
| class WrappedLineColorProperty : public WrappedSeriesAreaOrLineProperty |
| { |
| public: |
| WrappedLineColorProperty( DataSeriesPointWrapper* pDataSeriesPointWrapper ); |
| virtual ~WrappedLineColorProperty(); |
| |
| virtual void setPropertyValue( const Any& rOuterValue, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet >& xInnerPropertySet ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::beans::PropertyVetoException, ::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); |
| |
| virtual void setPropertyToDefault( const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyState >& xInnerPropertyState ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException); |
| |
| virtual ::com::sun::star::uno::Any getPropertyDefault( const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyState >& xInnerPropertyState ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); |
| |
| protected: |
| DataSeriesPointWrapper* m_pDataSeriesPointWrapper; |
| mutable Any m_aDefaultValue; |
| mutable Any m_aOuterValue; |
| }; |
| |
| WrappedLineColorProperty::WrappedLineColorProperty( |
| DataSeriesPointWrapper* pDataSeriesPointWrapper ) |
| : WrappedSeriesAreaOrLineProperty(C2U( "LineColor" ), C2U( "BorderColor" ), C2U( "Color" ), pDataSeriesPointWrapper ) |
| , m_pDataSeriesPointWrapper( pDataSeriesPointWrapper ) |
| , m_aDefaultValue(uno::makeAny(sal_Int32( 0x0099ccff ))) // blue 8 |
| , m_aOuterValue(m_aDefaultValue) |
| { |
| } |
| |
| WrappedLineColorProperty::~WrappedLineColorProperty() |
| { |
| } |
| |
| void WrappedLineColorProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const |
| throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| if( m_pDataSeriesPointWrapper && m_pDataSeriesPointWrapper->isLinesForbidden() ) |
| m_aOuterValue = rOuterValue; |
| else |
| WrappedSeriesAreaOrLineProperty::setPropertyValue( rOuterValue, xInnerPropertySet ); |
| } |
| |
| void WrappedLineColorProperty::setPropertyToDefault( const Reference< beans::XPropertyState >& xInnerPropertyState ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException) |
| { |
| if( m_pDataSeriesPointWrapper && m_pDataSeriesPointWrapper->isLinesForbidden() ) |
| m_aOuterValue = m_aDefaultValue; |
| else |
| WrappedSeriesAreaOrLineProperty::setPropertyToDefault( xInnerPropertyState ); |
| } |
| |
| Any WrappedLineColorProperty::getPropertyDefault( const Reference< beans::XPropertyState >& xInnerPropertyState ) const |
| throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| if( m_pDataSeriesPointWrapper && !m_pDataSeriesPointWrapper->isSupportingAreaProperties() ) |
| return m_aDefaultValue; |
| else |
| return WrappedSeriesAreaOrLineProperty::getPropertyDefault( xInnerPropertyState ); |
| } |
| |
| //---------------------------------------------------------------------------------------------------------------------- |
| |
| class WrappedLineStyleProperty : public WrappedSeriesAreaOrLineProperty |
| { |
| public: |
| WrappedLineStyleProperty( DataSeriesPointWrapper* pDataSeriesPointWrapper ); |
| virtual ~WrappedLineStyleProperty(); |
| |
| virtual void setPropertyValue( const Any& rOuterValue, const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet >& xInnerPropertySet ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::beans::PropertyVetoException, ::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::lang::WrappedTargetException, ::com::sun::star::uno::RuntimeException); |
| |
| virtual void setPropertyToDefault( const ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyState >& xInnerPropertyState ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException); |
| |
| protected: |
| DataSeriesPointWrapper* m_pDataSeriesPointWrapper; |
| mutable Any m_aDefaultValue; |
| mutable Any m_aOuterValue; |
| }; |
| |
| WrappedLineStyleProperty::WrappedLineStyleProperty( |
| DataSeriesPointWrapper* pDataSeriesPointWrapper ) |
| : WrappedSeriesAreaOrLineProperty(C2U( "LineStyle" ), C2U( "BorderStyle" ), C2U( "LineStyle" ), pDataSeriesPointWrapper ) |
| , m_pDataSeriesPointWrapper( pDataSeriesPointWrapper ) |
| , m_aDefaultValue(uno::makeAny(drawing::LineStyle_SOLID)) |
| , m_aOuterValue(m_aDefaultValue) |
| { |
| } |
| |
| WrappedLineStyleProperty::~WrappedLineStyleProperty() |
| { |
| } |
| |
| void WrappedLineStyleProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const |
| throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| Any aNewValue(rOuterValue); |
| if( m_pDataSeriesPointWrapper && m_pDataSeriesPointWrapper->isLinesForbidden() ) |
| { |
| m_aOuterValue = rOuterValue; |
| aNewValue = uno::makeAny(drawing::LineStyle_NONE); |
| } |
| WrappedSeriesAreaOrLineProperty::setPropertyValue( aNewValue, xInnerPropertySet ); |
| } |
| |
| void WrappedLineStyleProperty::setPropertyToDefault( const Reference< beans::XPropertyState >& xInnerPropertyState ) const |
| throw (::com::sun::star::beans::UnknownPropertyException, ::com::sun::star::uno::RuntimeException) |
| { |
| if( m_pDataSeriesPointWrapper && m_pDataSeriesPointWrapper->isLinesForbidden() ) |
| m_aOuterValue = m_aDefaultValue; |
| else |
| WrappedSeriesAreaOrLineProperty::setPropertyToDefault( xInnerPropertyState ); |
| } |
| |
| //---------------------------------------------------------------------------------------------------------------------- |
| //---------------------------------------------------------------------------------------------------------------------- |
| //---------------------------------------------------------------------------------------------------------------------- |
| |
| } // anonymous namespace |
| |
| // -------------------------------------------------------------------------------- |
| |
| namespace chart |
| { |
| namespace wrapper |
| { |
| |
| DataSeriesPointWrapper::DataSeriesPointWrapper( |
| ::boost::shared_ptr< Chart2ModelContact > spChart2ModelContact ) |
| : m_spChart2ModelContact( spChart2ModelContact ) |
| , m_aEventListenerContainer( m_aMutex ) |
| , m_eType( DATA_SERIES ) |
| , m_nSeriesIndexInNewAPI( -1 ) |
| , m_nPointIndex( -1 ) |
| , m_bLinesAllowed(sal_True) |
| , m_xDataSeries(0) |
| { |
| //need initialize call afterwards |
| } |
| |
| void SAL_CALL DataSeriesPointWrapper::initialize( const uno::Sequence< uno::Any >& aArguments ) |
| throw ( uno::Exception, uno::RuntimeException) |
| { |
| DBG_ASSERT(aArguments.getLength() >= 1,"need at least 1 argument to initialize the DataSeriesPointWrapper: series reference + optional datapoint index"); |
| |
| m_nSeriesIndexInNewAPI = -1;//ignored in this case |
| m_nPointIndex = -1; |
| if( aArguments.getLength() >= 1 ) |
| { |
| aArguments[0] >>= m_xDataSeries; |
| if( aArguments.getLength() >= 2 ) |
| aArguments[1] >>= m_nPointIndex; |
| } |
| |
| if( !m_xDataSeries.is() ) |
| throw uno::Exception( |
| C2U( "DataSeries index invalid" ), static_cast< ::cppu::OWeakObject * >( this )); |
| |
| //todo: check upper border of point index |
| |
| if( m_nPointIndex >= 0 ) |
| m_eType = DATA_POINT; |
| else |
| m_eType = DATA_SERIES; |
| } |
| |
| DataSeriesPointWrapper::DataSeriesPointWrapper( eType _eType |
| , sal_Int32 nSeriesIndexInNewAPI |
| , sal_Int32 nPointIndex //ignored for series |
| , ::boost::shared_ptr< Chart2ModelContact > spChart2ModelContact ) |
| : m_spChart2ModelContact( spChart2ModelContact ) |
| , m_aEventListenerContainer( m_aMutex ) |
| , m_eType( _eType ) |
| , m_nSeriesIndexInNewAPI( nSeriesIndexInNewAPI ) |
| , m_nPointIndex( (_eType == DATA_POINT) ? nPointIndex : -1 ) |
| , m_xDataSeries(0) |
| { |
| } |
| |
| DataSeriesPointWrapper::~DataSeriesPointWrapper() |
| { |
| } |
| |
| // ____ XComponent ____ |
| void SAL_CALL DataSeriesPointWrapper::dispose() |
| throw (uno::RuntimeException) |
| { |
| uno::Reference< uno::XInterface > xSource( static_cast< ::cppu::OWeakObject* >( this ) ); |
| m_aEventListenerContainer.disposeAndClear( lang::EventObject( xSource ) ); |
| |
| m_xDataSeries.clear(); |
| clearWrappedPropertySet(); |
| } |
| |
| void SAL_CALL DataSeriesPointWrapper::addEventListener( |
| const uno::Reference< lang::XEventListener >& xListener ) |
| throw (uno::RuntimeException) |
| { |
| m_aEventListenerContainer.addInterface( xListener ); |
| } |
| |
| void SAL_CALL DataSeriesPointWrapper::removeEventListener( |
| const uno::Reference< lang::XEventListener >& aListener ) |
| throw (uno::RuntimeException) |
| { |
| m_aEventListenerContainer.removeInterface( aListener ); |
| } |
| |
| // ____ XEventListener ____ |
| void SAL_CALL DataSeriesPointWrapper::disposing( const lang::EventObject& /*Source*/ ) |
| throw (uno::RuntimeException) |
| { |
| } |
| |
| // ================================================================================ |
| |
| bool DataSeriesPointWrapper::isSupportingAreaProperties() |
| { |
| Reference< chart2::XDataSeries > xSeries( this->getDataSeries() ); |
| Reference< chart2::XDiagram > xDiagram( m_spChart2ModelContact->getChart2Diagram() ); |
| Reference< chart2::XChartType > xChartType( DiagramHelper::getChartTypeOfSeries( xDiagram, xSeries ) ); |
| sal_Int32 nDimensionCount = DiagramHelper::getDimension( xDiagram ); |
| |
| return ChartTypeHelper::isSupportingAreaProperties( xChartType, nDimensionCount ); |
| } |
| |
| bool DataSeriesPointWrapper::isLinesForbidden() |
| { |
| return !m_bLinesAllowed; |
| } |
| |
| Reference< chart2::XDataSeries > DataSeriesPointWrapper::getDataSeries() |
| { |
| Reference< chart2::XDataSeries > xSeries( m_xDataSeries ); |
| if( !xSeries.is() ) |
| { |
| Reference< chart2::XDiagram > xDiagram( m_spChart2ModelContact->getChart2Diagram() ); |
| ::std::vector< uno::Reference< chart2::XDataSeries > > aSeriesList( |
| ::chart::DiagramHelper::getDataSeriesFromDiagram( xDiagram ) ); |
| |
| if( m_nSeriesIndexInNewAPI >= 0 && m_nSeriesIndexInNewAPI < static_cast<sal_Int32>(aSeriesList.size()) ) |
| xSeries = aSeriesList[m_nSeriesIndexInNewAPI]; |
| } |
| |
| return xSeries; |
| } |
| |
| Reference< beans::XPropertySet > DataSeriesPointWrapper::getDataPointProperties() |
| { |
| Reference< beans::XPropertySet > xPointProp; |
| |
| Reference< chart2::XDataSeries > xSeries( this->getDataSeries() ); |
| |
| // may throw an IllegalArgumentException |
| if( xSeries.is() ) |
| xPointProp = xSeries->getDataPointByIndex( m_nPointIndex ); |
| |
| return xPointProp; |
| } |
| |
| // ================================================================================ |
| |
| //ReferenceSizePropertyProvider |
| void DataSeriesPointWrapper::updateReferenceSize() |
| { |
| Reference< beans::XPropertySet > xProp( this->getInnerPropertySet(), uno::UNO_QUERY ); |
| if( xProp.is() ) |
| { |
| if( xProp->getPropertyValue( C2U("ReferencePageSize") ).hasValue() ) |
| xProp->setPropertyValue( C2U("ReferencePageSize"), uno::makeAny( |
| m_spChart2ModelContact->GetPageSize() )); |
| } |
| } |
| Any DataSeriesPointWrapper::getReferenceSize() |
| { |
| Any aRet; |
| Reference< beans::XPropertySet > xProp( this->getInnerPropertySet(), uno::UNO_QUERY ); |
| if( xProp.is() ) |
| aRet = xProp->getPropertyValue( C2U("ReferencePageSize") ); |
| return aRet; |
| } |
| awt::Size DataSeriesPointWrapper::getCurrentSizeForReference() |
| { |
| return m_spChart2ModelContact->GetPageSize(); |
| } |
| |
| // ================================================================================ |
| |
| // WrappedPropertySet |
| |
| //XPropertyState |
| beans::PropertyState SAL_CALL DataSeriesPointWrapper::getPropertyState( const ::rtl::OUString& rPropertyName ) |
| throw (beans::UnknownPropertyException, uno::RuntimeException) |
| { |
| beans::PropertyState aState( beans::PropertyState_DIRECT_VALUE ); |
| |
| if( m_eType == DATA_SERIES ) |
| aState = WrappedPropertySet::getPropertyState( rPropertyName ); |
| else |
| { |
| if( rPropertyName.equals(C2U("FillColor")) ) |
| { |
| Reference< beans::XPropertySet > xSeriesProp( getDataSeries(), uno::UNO_QUERY ); |
| sal_Bool bVaryColorsByPoint = sal_False; |
| if( xSeriesProp.is() && (xSeriesProp->getPropertyValue( C2U("VaryColorsByPoint") ) >>= bVaryColorsByPoint) |
| && bVaryColorsByPoint ) |
| return beans::PropertyState_DIRECT_VALUE; |
| } |
| else if( rPropertyName.equals(C2U("Lines")) |
| || rPropertyName.equals(C2U("SymbolType")) |
| || rPropertyName.equals(C2U("SymbolSize")) ) |
| return WrappedPropertySet::getPropertyState( rPropertyName ); |
| |
| uno::Any aDefault( getPropertyDefault( rPropertyName ) ); |
| uno::Any aValue( getPropertyValue( rPropertyName ) ); |
| if( aDefault==aValue ) |
| aState = beans::PropertyState_DEFAULT_VALUE; |
| } |
| return aState; |
| } |
| |
| void SAL_CALL DataSeriesPointWrapper::setPropertyToDefault( const ::rtl::OUString& rPropertyName ) |
| throw (beans::UnknownPropertyException, uno::RuntimeException) |
| { |
| if( m_eType == DATA_SERIES ) |
| WrappedPropertySet::setPropertyToDefault( rPropertyName ); |
| else |
| { |
| //for data points the default is given by the series |
| setPropertyValue( rPropertyName, getPropertyDefault( rPropertyName ) ); |
| } |
| } |
| Any SAL_CALL DataSeriesPointWrapper::getPropertyDefault( const ::rtl::OUString& rPropertyName ) |
| throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| Any aRet; |
| try |
| { |
| sal_Int32 nHandle = getInfoHelper().getHandleByName( rPropertyName ); |
| if( nHandle > 0 ) |
| { |
| //always take the series current value as default for points |
| Reference< beans::XPropertySet > xInnerPropertySet( getDataSeries(), uno::UNO_QUERY ); |
| if( xInnerPropertySet.is() ) |
| { |
| const WrappedProperty* pWrappedProperty = getWrappedProperty( rPropertyName ); |
| if( pWrappedProperty ) |
| aRet = pWrappedProperty->getPropertyValue(xInnerPropertySet); |
| else |
| aRet = xInnerPropertySet->getPropertyValue( rPropertyName ); |
| } |
| } |
| } |
| catch( beans::UnknownPropertyException& ex ) |
| { |
| (void)(ex); |
| aRet = WrappedPropertySet::getPropertyDefault( rPropertyName ); |
| } |
| return aRet; |
| } |
| |
| Reference< beans::XPropertySet > DataSeriesPointWrapper::getInnerPropertySet() |
| { |
| if( m_eType == DATA_SERIES ) |
| return Reference< beans::XPropertySet >( getDataSeries(), uno::UNO_QUERY ); |
| return getDataPointProperties(); |
| } |
| |
| const Sequence< beans::Property >& DataSeriesPointWrapper::getPropertySequence() |
| { |
| if( m_eType == DATA_SERIES ) |
| return *StaticSeriesWrapperPropertyArray::get(); |
| else |
| return *StaticPointWrapperPropertyArray::get(); |
| } |
| |
| const std::vector< WrappedProperty* > DataSeriesPointWrapper::createWrappedProperties() |
| { |
| ::std::vector< ::chart::WrappedProperty* > aWrappedProperties; |
| |
| WrappedCharacterHeightProperty::addWrappedProperties( aWrappedProperties, this ); |
| |
| if( m_eType == DATA_SERIES ) |
| { |
| WrappedStatisticProperties::addWrappedPropertiesForSeries( aWrappedProperties, m_spChart2ModelContact ); |
| aWrappedProperties.push_back( new WrappedAttachedAxisProperty( m_spChart2ModelContact ) ); |
| |
| WrappedNumberFormatProperty* pWrappedNumberFormatProperty = new WrappedNumberFormatProperty( m_spChart2ModelContact ); |
| aWrappedProperties.push_back( pWrappedNumberFormatProperty ); |
| aWrappedProperties.push_back( new WrappedLinkNumberFormatProperty(pWrappedNumberFormatProperty) ); |
| } |
| |
| WrappedSymbolProperties::addWrappedPropertiesForSeries( aWrappedProperties, m_spChart2ModelContact ); |
| WrappedDataCaptionProperties::addWrappedPropertiesForSeries( aWrappedProperties, m_spChart2ModelContact ); |
| WrappedScaleTextProperties::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); |
| |
| //add unnamed fill properties (different inner names here) |
| // aWrappedProperties.push_back( new WrappedUnnamedProperty( C2U( "FillGradient" ), C2U( "GradientName" ) ) ); |
| // aWrappedProperties.push_back( new WrappedUnnamedProperty( C2U( "FillHatch" ), C2U( "HatchName" ) ) ); |
| // aWrappedProperties.push_back( new WrappedUnnamedProperty( C2U( "FillTransparenceGradient" ), C2U( "TransparencyGradientName" ) ) ); |
| |
| //add unnamed line properties (different inner names here) |
| // aWrappedProperties.push_back( new WrappedUnnamedProperty( C2U( "LineDash" ), C2U( "LineDashName" ) ) ); |
| |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillColor" ), C2U( "Color" ) ) ); |
| aWrappedProperties.push_back( new WrappedLineStyleProperty( this ) ); |
| aWrappedProperties.push_back( new WrappedLineColorProperty( this ) ); |
| aWrappedProperties.push_back( new WrappedSeriesAreaOrLineProperty( C2U( "LineDashName" ), C2U( "BorderDashName" ), C2U( "LineDashName" ), this ) ); |
| aWrappedProperties.push_back( new WrappedSeriesAreaOrLineProperty( C2U( "LineTransparence" ), C2U( "BorderTransparency" ), C2U( "Transparency" ), this ) ); |
| aWrappedProperties.push_back( new WrappedSeriesAreaOrLineProperty( C2U( "LineWidth" ), C2U( "BorderWidth" ), C2U( "LineWidth" ), this ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillStyle" ), C2U( "FillStyle" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillTransparence" ), C2U( "Transparency" ) ) ); |
| |
| aWrappedProperties.push_back( new WrappedIgnoreProperty( C2U( "LineJoint" ), uno::makeAny( drawing::LineJoint_ROUND ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillTransparenceGradientName" ), C2U( "TransparencyGradientName" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillGradientName" ), C2U( "GradientName" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillGradientStepCount" ), C2U( "GradientStepCount" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillHatchName" ), C2U( "HatchName" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapName" ), C2U( "FillBitmapName" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBackground" ), C2U( "FillBackground" ) ) ); |
| |
| //bitmap properties |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapMode" ), C2U( "FillBitmapMode" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapSizeX" ), C2U( "FillBitmapSizeX" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapSizeY" ), C2U( "FillBitmapSizeY" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapLogicalSize" ), C2U( "FillBitmapLogicalSize" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapOffsetX" ), C2U( "FillBitmapOffsetX" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapOffsetY" ), C2U( "FillBitmapOffsetY" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapRectanglePoint" ), C2U( "FillBitmapRectanglePoint" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapPositionOffsetX" ), C2U( "FillBitmapPositionOffsetX" ) ) ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "FillBitmapPositionOffsetY" ), C2U( "FillBitmapPositionOffsetY" ) ) ); |
| |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "SolidType" ), C2U( "Geometry3D" ) ) ); |
| aWrappedProperties.push_back( new WrappedSegmentOffsetProperty() ); |
| aWrappedProperties.push_back( new WrappedProperty( C2U( "D3DPercentDiagonal" ), C2U( "PercentDiagonal" ) ) ); |
| |
| aWrappedProperties.push_back( new WrappedTextRotationProperty() ); |
| |
| return aWrappedProperties; |
| } |
| |
| void SAL_CALL DataSeriesPointWrapper::setPropertyValue( const ::rtl::OUString& rPropertyName, const Any& rValue ) |
| throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| if(rPropertyName.equals(C2U("Lines"))) |
| { |
| if( ! (rValue >>= m_bLinesAllowed) ) |
| throw lang::IllegalArgumentException( C2U("Property Lines requires value of type sal_Bool"), 0, 0 ); |
| } |
| |
| sal_Int32 nHandle = getInfoHelper().getHandleByName( rPropertyName ); |
| static const sal_Int32 nErrorCategoryHandle = getInfoHelper().getHandleByName( C2U("ErrorCategory") ); |
| if( nErrorCategoryHandle == nHandle ) |
| { |
| ::com::sun::star::chart::ChartErrorCategory aNewValue = ::com::sun::star::chart::ChartErrorCategory_NONE; |
| rValue >>= aNewValue; |
| Any aLow, aHigh; |
| bool bSetHighAndLowValues = false; |
| switch(aNewValue) |
| { |
| case ::com::sun::star::chart::ChartErrorCategory_CONSTANT_VALUE: |
| aHigh = this->getPropertyValue(C2U("ConstantErrorHigh")); |
| aLow = this->getPropertyValue(C2U("ConstantErrorLow")); |
| bSetHighAndLowValues = true; |
| break; |
| case ::com::sun::star::chart::ChartErrorCategory_PERCENT: |
| aHigh = aLow = this->getPropertyValue(C2U("PercentageError")); |
| bSetHighAndLowValues = true; |
| break; |
| case ::com::sun::star::chart::ChartErrorCategory_ERROR_MARGIN: |
| aHigh = aLow = this->getPropertyValue(C2U("ErrorMargin")); |
| bSetHighAndLowValues = true; |
| break; |
| default: |
| break; |
| } |
| |
| WrappedPropertySet::setPropertyValue( rPropertyName, rValue ); |
| |
| if(bSetHighAndLowValues) |
| { |
| switch(aNewValue) |
| { |
| case ::com::sun::star::chart::ChartErrorCategory_CONSTANT_VALUE: |
| this->setPropertyValue(C2U("ConstantErrorHigh"),aHigh); |
| this->setPropertyValue(C2U("ConstantErrorLow"),aLow); |
| break; |
| case ::com::sun::star::chart::ChartErrorCategory_PERCENT: |
| this->setPropertyValue(C2U("PercentageError"),aHigh); |
| break; |
| case ::com::sun::star::chart::ChartErrorCategory_ERROR_MARGIN: |
| this->setPropertyValue(C2U("ErrorMargin"),aHigh); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| else |
| WrappedPropertySet::setPropertyValue( rPropertyName, rValue ); |
| } |
| |
| Any SAL_CALL DataSeriesPointWrapper::getPropertyValue( const rtl::OUString& rPropertyName ) |
| throw ( beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException) |
| { |
| if( m_eType == DATA_POINT ) |
| { |
| if( rPropertyName.equals(C2U("FillColor")) ) |
| { |
| Reference< beans::XPropertySet > xSeriesProp( getDataSeries(), uno::UNO_QUERY ); |
| sal_Bool bVaryColorsByPoint = sal_False; |
| if( xSeriesProp.is() && (xSeriesProp->getPropertyValue( C2U("VaryColorsByPoint") ) >>= bVaryColorsByPoint) |
| && bVaryColorsByPoint ) |
| { |
| uno::Reference< beans::XPropertyState > xPointState( DataSeriesPointWrapper::getDataPointProperties(), uno::UNO_QUERY ); |
| if( xPointState.is() && xPointState->getPropertyState( C2U("Color")) == beans::PropertyState_DEFAULT_VALUE ) |
| { |
| Reference< chart2::XDiagram > xDiagram( m_spChart2ModelContact->getChart2Diagram() ); |
| if( xDiagram.is() ) |
| { |
| Reference< chart2::XColorScheme > xColorScheme( xDiagram->getDefaultColorScheme() ); |
| if( xColorScheme.is() ) |
| return uno::makeAny( xColorScheme->getColorByIndex( m_nPointIndex ) ); |
| } |
| } |
| } |
| } |
| } |
| return WrappedPropertySet::getPropertyValue( rPropertyName ); |
| } |
| |
| // ================================================================================ |
| |
| uno::Sequence< ::rtl::OUString > DataSeriesPointWrapper::getSupportedServiceNames_Static() |
| { |
| uno::Sequence< ::rtl::OUString > aServices( 7 ); |
| aServices[ 0 ] = C2U( "com.sun.star.chart.ChartDataRowProperties" ); |
| aServices[ 1 ] = C2U( "com.sun.star.chart.ChartDataPointProperties" ); |
| aServices[ 2 ] = C2U( "com.sun.star.xml.UserDefinedAttributeSupplier" ); |
| aServices[ 3 ] = C2U( "com.sun.star.beans.PropertySet" ); |
| aServices[ 4 ] = C2U( "com.sun.star.drawing.FillProperties" ); |
| aServices[ 5 ] = C2U( "com.sun.star.drawing.LineProperties" ); |
| aServices[ 6 ] = C2U( "com.sun.star.style.CharacterProperties" ); |
| |
| return aServices; |
| } |
| |
| // implement XServiceInfo methods basing upon getSupportedServiceNames_Static |
| APPHELPER_XSERVICEINFO_IMPL( DataSeriesPointWrapper, lcl_aServiceName ); |
| |
| } // namespace wrapper |
| } // namespace chart |