diff --git a/VERSION b/VERSION
index a4f52a5..0fa4ae4 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-3.2.0
\ No newline at end of file
+3.3.0
\ No newline at end of file
diff --git a/docs/en/3.3.0/config.json b/docs/en/3.3.0/config.json
new file mode 100644
index 0000000..12d3951
--- /dev/null
+++ b/docs/en/3.3.0/config.json
@@ -0,0 +1,190 @@
+{
+    "language": "English",
+    "merge": {
+        "accelerometer.md": [
+            "cordova/accelerometer/accelerometer.md",
+            "cordova/accelerometer/accelerometer.getCurrentAcceleration.md",
+            "cordova/accelerometer/accelerometer.watchAcceleration.md",
+            "cordova/accelerometer/accelerometer.clearWatch.md",
+            "cordova/accelerometer/acceleration/acceleration.md",
+            "cordova/accelerometer/parameters/accelerometerSuccess.md",
+            "cordova/accelerometer/parameters/accelerometerError.md",
+            "cordova/accelerometer/parameters/accelerometerOptions.md"
+        ],
+        "camera.md": [
+            "cordova/camera/camera.md",
+            "cordova/camera/camera.getPicture.md",
+            "cordova/camera/parameter/cameraSuccess.md",
+            "cordova/camera/parameter/cameraError.md",
+            "cordova/camera/parameter/cameraOptions.md",
+            "cordova/camera/parameter/CameraPopoverOptions.md",
+            "cordova/camera/parameter/CameraPopoverHandle.md"
+        ],
+        "capture.md": [
+            "cordova/media/capture/capture.md",
+            "cordova/media/capture/captureAudio.md",
+            "cordova/media/capture/captureAudioOptions.md",
+            "cordova/media/capture/captureImage.md",
+            "cordova/media/capture/captureImageOptions.md",
+            "cordova/media/capture/captureVideo.md",
+            "cordova/media/capture/captureVideoOptions.md",
+            "cordova/media/capture/CaptureError.md",
+            "cordova/media/capture/CaptureCB.md",
+            "cordova/media/capture/CaptureErrorCB.md",
+            "cordova/media/capture/ConfigurationData.md",
+            "cordova/media/capture/MediaFile.md",
+            "cordova/media/capture/MediaFile.getFormatData.md",
+            "cordova/media/capture/MediaFileData.md"
+        ],
+        "compass.md": [
+            "cordova/compass/compass.md",
+            "cordova/compass/compass.getCurrentHeading.md",
+            "cordova/compass/compass.watchHeading.md",
+            "cordova/compass/compass.clearWatch.md",
+            "cordova/compass/compass.watchHeadingFilter.md",
+            "cordova/compass/compass.clearWatchFilter.md",
+            "cordova/compass/parameters/compassSuccess.md",
+            "cordova/compass/parameters/compassError.md",
+            "cordova/compass/parameters/compassOptions.md",
+            "cordova/compass/parameters/compassHeading.md",
+            "cordova/compass/compassError/compassError.md"
+        ],
+        "contacts.md": [
+            "cordova/contacts/contacts.md",
+            "cordova/contacts/contacts.create.md",
+            "cordova/contacts/contacts.find.md",
+            "cordova/contacts/Contact/contact.md",
+            "cordova/contacts/ContactAddress/contactaddress.md",
+            "cordova/contacts/ContactField/contactfield.md",
+            "cordova/contacts/ContactFindOptions/contactfindoptions.md",
+            "cordova/contacts/ContactName/contactname.md",
+            "cordova/contacts/ContactOrganization/contactorganization.md",
+            "cordova/contacts/ContactError/contactError.md",
+            "cordova/contacts/parameters/contactSuccess.md",
+            "cordova/contacts/parameters/contactError.md",
+            "cordova/contacts/parameters/contactFields.md",
+            "cordova/contacts/parameters/contactFindOptions.md"
+        ],
+        "device.md": [
+            "cordova/device/device.md",
+            "cordova/device/device.model.md",
+            "cordova/device/device.cordova.md",
+            "cordova/device/device.platform.md",
+            "cordova/device/device.uuid.md",
+            "cordova/device/device.version.md",
+            "cordova/device/device.name.md"
+        ],
+        "events.md": [
+            "cordova/events/events.md",
+            "cordova/events/events.deviceready.md",
+            "cordova/events/events.pause.md",
+            "cordova/events/events.resume.md",
+            "cordova/events/events.online.md",
+            "cordova/events/events.offline.md",
+            "cordova/events/events.backbutton.md",
+            "cordova/events/events.batterycritical.md",
+            "cordova/events/events.batterylow.md",
+            "cordova/events/events.batterystatus.md",
+            "cordova/events/events.menubutton.md",
+            "cordova/events/events.searchbutton.md",
+            "cordova/events/events.startcallbutton.md",
+            "cordova/events/events.endcallbutton.md",
+            "cordova/events/events.volumedownbutton.md",
+            "cordova/events/events.volumeupbutton.md"
+        ],
+        "file.md": [
+            "cordova/file/file.md",
+            "cordova/file/fileobj/fileobj.md",
+            "cordova/file/filereader/filereader.md",
+            "cordova/file/filewriter/filewriter.md",
+            "cordova/file/filesystem/filesystem.md",
+            "cordova/file/fileentry/fileentry.md",
+            "cordova/file/directoryentry/directoryentry.md",
+            "cordova/file/directoryreader/directoryreader.md",
+            "cordova/file/filetransfer/filetransfer.md",
+            "cordova/file/fileuploadoptions/fileuploadoptions.md",
+            "cordova/file/fileuploadresult/fileuploadresult.md",
+            "cordova/file/flags/flags.md",
+            "cordova/file/localfilesystem/localfilesystem.md",
+            "cordova/file/metadata/metadata.md",
+            "cordova/file/fileerror/fileerror.md",
+            "cordova/file/filetransfererror/filetransfererror.md"
+        ],
+        "geolocation.md": [
+            "cordova/geolocation/geolocation.md",
+            "cordova/geolocation/geolocation.getCurrentPosition.md",
+            "cordova/geolocation/geolocation.watchPosition.md",
+            "cordova/geolocation/geolocation.clearWatch.md",
+            "cordova/geolocation/Coordinates/coordinates.md",
+            "cordova/geolocation/Position/position.md",
+            "cordova/geolocation/PositionError/positionError.md",
+            "cordova/geolocation/parameters/geolocationSuccess.md",
+            "cordova/geolocation/parameters/geolocationError.md",
+            "cordova/geolocation/parameters/geolocation.options.md"
+        ],
+        "globalization.md": [
+            "cordova/globalization/globalization.md",
+            "cordova/globalization/globalization.getPreferredLanguage.md",
+            "cordova/globalization/globalization.getLocaleName.md",
+            "cordova/globalization/globalization.dateToString.md",
+            "cordova/globalization/globalization.stringToDate.md",
+            "cordova/globalization/globalization.getDatePattern.md",
+            "cordova/globalization/globalization.getDateNames.md",
+            "cordova/globalization/globalization.isDayLightSavingsTime.md",
+            "cordova/globalization/globalization.getFirstDayOfWeek.md",
+            "cordova/globalization/globalization.numberToString.md",
+            "cordova/globalization/globalization.stringToNumber.md",
+            "cordova/globalization/globalization.getNumberPattern.md",
+            "cordova/globalization/globalization.getCurrencyPattern.md",
+            "cordova/globalization/GlobalizationError/globalizationerror.md"
+        ],
+        "media.md": [
+            "cordova/media/media.md",
+            "cordova/media/media.getCurrentPosition.md",
+            "cordova/media/media.getDuration.md",
+            "cordova/media/media.pause.md",
+            "cordova/media/media.play.md",
+            "cordova/media/media.release.md",
+            "cordova/media/media.seekTo.md",
+            "cordova/media/media.setVolume.md",
+            "cordova/media/media.startRecord.md",
+            "cordova/media/media.stop.md",
+            "cordova/media/media.stopRecord.md",
+            "cordova/media/MediaError/mediaError.md",
+            "cordova/media/Parameters/mediaError.md"
+        ],
+        "network.md": [
+            "cordova/network/network.md",
+            "cordova/network/network.isReachable.md",
+            "cordova/network/NetworkStatus/NetworkStatus.md",
+            "cordova/network/parameters/reachableCallback.md",
+            "cordova/network/parameters/reachableHostname.md",
+            "cordova/network/parameters/reachableOptions.md"
+        ],
+        "connection.md": [
+            "cordova/connection/connection.md",
+            "cordova/connection/connection.type.md"
+        ],
+        "notification.md": [
+            "cordova/notification/notification.md",
+            "cordova/notification/notification.alert.md",
+            "cordova/notification/notification.confirm.md",
+            "cordova/notification/notification.prompt.md",
+            "cordova/notification/notification.beep.md",
+            "cordova/notification/notification.vibrate.md"
+        ],
+        "splashscreen.md": [
+            "cordova/splashscreen/splashscreen.md",
+            "cordova/splashscreen/splashscreen.show.md",
+            "cordova/splashscreen/splashscreen.hide.md"
+        ],
+        "storage.md": [
+            "cordova/storage/storage.md"
+        ],
+        "inappbrowser.md": [
+            "cordova/inappbrowser/inappbrowser.md",
+            "cordova/inappbrowser/window.open.md"
+        ]
+        
+    }
+}
diff --git a/docs/en/3.3.0/config_ref/images.md b/docs/en/3.3.0/config_ref/images.md
new file mode 100644
index 0000000..6c9bf98
--- /dev/null
+++ b/docs/en/3.3.0/config_ref/images.md
@@ -0,0 +1,198 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Icons and Splash Screens
+
+This section shows how to configure an app's icon and optional splash
+screen for various platforms, both when working in the Cordova CLI
+(described in The Command-Line Interface) or using platform-specific
+SDK tools (detailed in the Platform Guides).
+
+## Configuring Icons in the CLI
+
+When working in the CLI, icon source files are located within various
+platform-specific subdirectories within the project's `www/res/icons`
+directory. Newly created projects come with a default set of Cordova
+icons for you to replace for the platforms you wish to target.
+
+Android specifies icons for low, medium, high, and extra-high resolutions:
+
+        android/icon-36-ldpi.png
+        android/icon-48-mdpi.png
+        android/icon-72-hdpi.png
+        android/icon-96-xhdpi.png
+
+The iOS platform specifies 72-pixel-square icons for iPads, and
+57-pixel icons for iPhones and iPods, with high-resolution _2x_
+variants for retina displays:
+
+        ios/icon-57-2x.png
+        ios/icon-57.png
+        ios/icon-72-2x.png
+        ios/icon-72.png
+
+Windows Phone specifies a default 48-pixel icon, along with various
+devices' background tiling images used when representing applications:
+
+        windows-phone/icon-48.png
+        windows-phone/icon-62-tile.png
+        windows-phone/icon-173-tile.png
+
+Blackberry 10 requires an icon element in config.xml:
+
+        <icon src="blackberry10/icon-86.png" />
+
+See BlackBerry's documentation for tareting multiple sizes and locales.
+
+[http://developer.blackberry.com/html5/documentation/icon_element.html]
+
+Tizen requires an 128-pixel icon:
+
+        tizen/icon-128.png
+
+## Configuring Splash Screens in the CLI
+
+Use the Splashscreen API to enable display of an app's introductory
+splash screen on many platforms.  When working in the CLI, splash
+screen source files are located within the project's `www/res/screens`
+subdirectory.
+
+Android specifies both portrait- and landscape-oriented splash screen
+images for low, medium, high, and extra-high resolutions:
+
+        android/screen-hdpi-landscape.png
+        android/screen-hdpi-portrait.png
+        android/screen-ldpi-landscape.png
+        android/screen-ldpi-portrait.png
+        android/screen-mdpi-landscape.png
+        android/screen-mdpi-portrait.png
+        android/screen-xhdpi-landscape.png
+        android/screen-xhdpi-portrait.png
+
+The iOS platform specifies variants for iPhone/iPod and iPad, with
+variants for retina displays and different orientations. The _568h_
+file applies to the iPhone 5's taller screen:
+
+        ios/screen-ipad-landscape-2x.png
+        ios/screen-ipad-landscape.png
+        ios/screen-ipad-portrait-2x.png
+        ios/screen-ipad-portrait.png
+        ios/screen-iphone-landscape-2x.png
+        ios/screen-iphone-landscape.png
+        ios/screen-iphone-portrait-2x.png
+        ios/screen-iphone-portrait.png
+        ios/screen-iphone-portrait-568h-2x.png
+
+Windows Phone specifies a single splash screen image:
+
+        windows-phone/screen-portrait.jpg
+
+The following sections detail how to set up splash screens when
+working with SDKs and related command-line tools described in Platform
+Guides.
+
+Don't forget to install the SplashScreen plugin before trying to use the
+`navigator.splashscreen.hide()` or `navigator.splashscreen.show()` methods.
+
+## Splash Screens for the Android Platform
+
+Place [9-patch image](https://developer.android.com/tools/help/draw9patch.html)
+files in the Android project's `platforms/android/res/drawable*` directories.
+
+The size for each should be:
+
+- xlarge (xhdpi): at least 960 &times; 720
+- large (hdpi): at least 640 &times; 480
+- medium (mdpi): at least 470 &times; 320
+- small (ldpi): at least 426 &times; 320
+
+If you want to use
+the default splash screen images provided in Cordova, you'll need to copy the
+png files from `platforms/android/www/res/screen/android` to
+`platforms/android/res/drawable*/`:
+
+    cd platforms/android/res
+    mkdir drawable-port-ldpi
+    cp -p ../assets/www/res/screen/android/screen-ldpi-portrait.png drawable-port-ldpi/screen.png
+    mkdir drawable-land-ldpi
+    cp -p ../assets/www/res/screen/android/screen-ldpi-landscape.png drawable-land-ldpi/screen.png
+    mkdir drawable-port-mdpi
+    cp -p ../assets/www/res/screen/android/screen-mdpi-portrait.png drawable-port-mdpi/screen.png
+    mkdir drawable-land-mdpi
+    cp -p ../assets/www/res/screen/android/screen-mdpi-landscape.png drawable-land-mdpi/screen.png
+    mkdir drawable-port-hdpi
+    cp -p ../assets/www/res/screen/android/screen-hdpi-portrait.png drawable-port-hdpi/screen.png
+    mkdir drawable-land-hdpi
+    cp -p ../assets/www/res/screen/android/screen-hdpi-landscape.png drawable-land-hdpi/screen.png
+    mkdir drawable-port-xhdpi
+    cp -p ../assets/www/res/screen/android/screen-xhdpi-portrait.png drawable-port-xhdpi/screen.png
+    mkdir drawable-land-xhdpi
+    cp -p ../assets/www/res/screen/android/screen-xhdpi-landscape.png drawable-land-xhdpi/screen.png
+
+The `drawable` directory names must follow the Android conventions for
+supporting
+[screen sizes](http://developer.android.com/guide/practices/screens_support.html) and
+[alternate resources](http://developer.android.com/guide/topics/resources/providing-resources.html#AlternativeResources).
+
+In `config.xml` in the project's `www` directory, add the following preferences:
+
+    <preference name="SplashScreen" value="splash" />
+    <preference name="SplashScreenDelay" value="10000" />
+
+The first line sets the image to display as the splash screen. This is the
+file name of the png in the `drawable*` directories. If you
+name the image anything other than `splash.png`, you need to modify
+this line. Do not include the filename extension (i.e., `.png`).
+If you want to use the default splash screens provided in
+Cordova as listed above, use the value `screen`.
+
+The second line sets the default delay of how long the splashscreen appears in
+milliseconds. This should be the maximum expected start time.
+The default value for SplashScreenDelay is 3000 ms.
+
+Finally, the splash screen should be present only as long as necessary. When
+your app has started and the webview has loaded, your app should hide the
+splash screen so that your main view is visible. Because the app start time
+will vary quite a bit due to a number of factors, it is recommended that your
+app explicitly invoke `navigator.splashscreen.hide()` in the Javascript
+method that responds to the `deviceready` event. Otherwise the splash screen
+will be visible for the SplashScreenDelay value that you configured above.
+This event-driven approach is highly recommended versus having the splash
+screen visible for always a fixed duration.
+
+## Splash Screens for the iOS Platform
+
+Copy splash screen images into the iOS project's `Resources/splash`
+directory. Only add those images for the devices you want to support,
+such as iPad or iPhone. The size of each image should be:
+
+- Default-568h@2x~iphone.png (640x1136 pixels)
+- Default-Landscape@2x~ipad.png (2048x1496 pixels)
+- Default-Landscape~ipad.png (1024x748 pixels)
+- Default-Portrait@2x~ipad.png (1536x2008 pixels)
+- Default-Portrait~ipad.png (768x1004 pixels)
+- Default@2x~iphone.png (640x960 pixels)
+- Default~iphone.png (320x480 pixels)
+
+## Splash Screens for the BlackBerry 10 Platform
+
+Add a rim:splash element to config.xml for each resolution and locale you wish
+to support:
+
+<http://developer.blackberry.com/html5/documentation/rim_splash_element.html>
diff --git a/docs/en/3.3.0/config_ref/index.md b/docs/en/3.3.0/config_ref/index.md
new file mode 100644
index 0000000..f337324
--- /dev/null
+++ b/docs/en/3.3.0/config_ref/index.md
@@ -0,0 +1,197 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# The config.xml File
+
+Many aspects of an app's behavior can be controlled with a global
+configuration file, `config.xml`, that belongs in the top-level web
+asset directory along with the app's home page.  This
+platform-agnostic XML file is arranged based on the W3C's [Packaged
+Web Apps (Widgets)](http://www.w3.org/TR/widgets/) specification, and
+extended to specify core Cordova API features, plugins, and
+platform-specific settings.
+
+For projects created with the Cordova CLI (described in The
+Command-Line Interface), this file can be found in the top-level `www`
+directory:
+
+        app/www/config.xml
+
+When using the CLI to build a project, versions of this file are
+passively copied along with other web-asset source files into various
+`platforms/*/www` subdirectories, for example:
+
+        app/platforms/ios/www/config.xml
+        app/platforms/blackberry10/www/config.xml
+
+An exception is Android, whose path specifies an additional `assets`
+subdirectory:
+
+        app/platforms/android/assets/www/config.xml
+
+If you use the CLI to create a project, but then shift your workflow
+to an SDK, you need to use an alternate set of source files for
+Android and iOS:
+
+        app/platforms/android/res/www/config.xml
+        app/platforms/ios/<APP_NAME>/config.xml
+
+This section details global and cross-platform configuration options.
+See the following sections for platform-specific options:
+
+- iOS Configuration
+- Android Configuration
+- BlackBerry 10 Configuration
+
+In addition to the various configuration options detailed below, you
+can also configure an application's core set of images for each target
+platform. See Icons and Splash Screens for more information.
+
+## Core Configuration Elements
+
+This example shows the default `config.xml` generated by the CLI's
+`create` command, described in The Command-Line Interface:
+
+        <widget id="com.example.hello" version="0.0.1">
+            <name>HelloWorld</name>
+            <description>
+                A sample Apache Cordova application that responds to the deviceready event.
+            </description>
+            <author email="dev@callback.apache.org" href="http://cordova.io">
+                Apache Cordova Team
+            </author>
+            <content src="index.html" />
+            <access origin="*" />
+            <preference name="Fullscreen" value="true" />
+            <preference name="WebViewBounce" value="true" />
+        </widget>
+
+<!-- QUERY: is WebViewBounce superseded by DisallowOverscroll? -->
+
+The following configuration elements appear in the top-level
+`config.xml` file, and are supported across all supported Cordova
+platforms:
+
+- The `<widget>` element's `id` attribute provides the app's
+  reverse-domain identifier, and the `version` its full version number
+  expressed in major/minor/patch notation.
+
+- The `<name>` element specifies the app's formal name, as it appears
+  on the device's home screen and within app-store interfaces.
+
+- The `<description>` and `<author>` elements specify metadata and
+  contact information that may appear within app-store listings.
+
+- The optional `<content>` element defines the app's starting
+  page in the top-level web assets directory. The default value is
+  `index.html`, which customarily appears in a project's top-level
+  `www` directory.
+
+- `<access>` elements define the set of external domains the app is
+  allowed to communicate with. The default value shown above allows
+  it to access any server. See the Domain Whitelist Guide for details.
+
+- The `<preference>` tag sets various options as pairs of
+  `name`/`value` attributes. Each preference's `name` is
+  case-insensitive.  Many preferences are unique to specific
+  platforms, as listed at the top of this page. The following sections
+  detail preferences that apply to more than one platform.
+
+## Global Preferences
+
+The following global preferences apply to all platforms:
+
+- `Fullscreen` allows you to hide the status bar at the top of the
+  screen. The default value is `false`. Example:
+
+        <preference name="Fullscreen" value="true" />
+
+- `Orientation` allows you to lock orientation and prevent the
+  interface from rotating in response to changes in orientation.
+  Possible values are `default`, `landscape`, or `portrait`. Example:
+
+        <preference name="Orientation" value="landscape" />
+
+  __NOTE__: The `default` value means _both_ landscape and portrait
+  orientations are enabled.  If you want to use each platform's
+  default settings (usually portrait-only), leave this tag out of the
+  `config.xml` file.
+
+## Multi-Platform Preferences
+
+The following preferences apply to more than one platform, but not to
+all of them:
+
+- `DisallowOverscroll` (boolean, defaults to `false`): set to `true`
+  if you don't want the interface to display any feedback when users
+  scroll past the beginning or end of content.
+
+        <preference name="DisallowOverscroll" value="true"/>
+
+  Applies to Android and iOS. On iOS, overscroll gestures cause
+  content to bounce back to its original position.  On Android, they
+  produce a more subtle glowing effect along the top or bottom edge of
+  the content.
+
+- `BackgroundColor`: Set the app's background color.  Supports a
+  four-byte hex value, with the first byte representing the alpha
+  channel, and standard RGB values for the following three bytes.  This
+  example specifies blue:
+
+        <preference name="BackgroundColor" value="0xff0000ff"/>
+
+  Applies to Android and BlackBerry. Overrides CSS otherwise available
+  across _all_ platforms, for example: `body{background-color:blue}`.
+
+- `HideKeyboardFormAccessoryBar` (boolean, defaults to `false`): set
+  to `true` to hide the additional toolbar that appears above the
+  keyboard, helping users navigate from one form input to another.
+
+        <preference name="HideKeyboardFormAccessoryBar" value="true"/>
+
+  Applies to iOS and BlackBerry. 
+
+## The _feature_ Element
+
+If you use the CLI to build applications, you use the `plugin` command
+to enable device APIs. This does not modify the top-level `config.xml`
+file, so the `<feature>` element does not apply to your workflow. If
+you work directly in an SDK and using the platform-specific
+`config.xml` file as source, you use the `<feature>` tag to enable
+device-level APIs and external plugins. They typically appear in this
+form:
+
+        <feature name="Plugin" value="PluginID" />
+
+They often appear with custom values in platform-specific `config.xml`
+files. For example, here is how to specify the Device API for Android
+projects:
+
+        <feature name="Device">
+            <param name="android-package" value="org.apache.cordova.device.Device" />
+        </feature>
+
+Here is how the element appears for iOS projects:
+
+        <feature name="Device">
+            <param name="ios-package" value="CDVDevice" />
+        </feature>
+
+See the API Reference for details on how to specify each feature. See
+the Plugin Development Guide for more information on plugins.
diff --git a/docs/en/3.3.0/cordova/accelerometer/acceleration/acceleration.md b/docs/en/3.3.0/cordova/accelerometer/acceleration/acceleration.md
new file mode 100644
index 0000000..ac4042a
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/acceleration/acceleration.md
@@ -0,0 +1,104 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Acceleration
+
+Contains `Accelerometer` data captured at a specific point in time.
+
+## Properties
+
+- __x__:  Amount of acceleration on the x-axis. (in m/s^2) _(Number)_
+- __y__:  Amount of acceleration on the y-axis. (in m/s^2) _(Number)_
+- __z__:  Amount of acceleration on the z-axis. (in m/s^2) _(Number)_
+- __timestamp__: Creation timestamp in milliseconds. _(DOMTimeStamp)_
+
+## Description
+
+An `Acceleration` object is populated and returned by any of the API's
+`Accelerometer` methods. Acceleration values include the effect of
+gravity (9.81 m/s^2), so that when a device lies flat and facing up,
+_x_, _y_, and _z_ values returned should be `0`, `0`, and `9.81`.
+
+## Supported Platforms
+
+- Amazon Fire OS 
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(acceleration) {
+        alert('Acceleration X: ' + acceleration.x + '\n' +
+              'Acceleration Y: ' + acceleration.y + '\n' +
+              'Acceleration Z: ' + acceleration.z + '\n' +
+              'Timestamp: '      + acceleration.timestamp + '\n');
+    };
+
+    function onError() {
+        alert('onError!');
+    };
+
+    navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Acceleration Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
+        }
+
+        // onSuccess: Get a snapshot of the current acceleration
+        //
+        function onSuccess(acceleration) {
+            alert('Acceleration X: ' + acceleration.x + '\n' +
+                  'Acceleration Y: ' + acceleration.y + '\n' +
+                  'Acceleration Z: ' + acceleration.z + '\n' +
+                  'Timestamp: '      + acceleration.timestamp + '\n');
+        }
+
+        // onError: Failed to get the acceleration
+        //
+        function onError() {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>getCurrentAcceleration</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/accelerometer/accelerometer.clearWatch.md b/docs/en/3.3.0/cordova/accelerometer/accelerometer.clearWatch.md
new file mode 100644
index 0000000..1a3c378
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/accelerometer.clearWatch.md
@@ -0,0 +1,111 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# accelerometer.clearWatch
+
+Stop watching the `Acceleration` referenced by the `watchID` parameter.
+
+    navigator.accelerometer.clearWatch(watchID);
+
+- __watchID__: The ID returned by `accelerometer.watchAcceleration`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
+
+    // ... later on ...
+
+    navigator.accelerometer.clearWatch(watchID);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Acceleration Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // The watch id references the current `watchAcceleration`
+        var watchID = null;
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            startWatch();
+        }
+
+        // Start watching the acceleration
+        //
+        function startWatch() {
+
+            // Update acceleration every 3 seconds
+            var options = { frequency: 3000 };
+
+            watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
+        }
+
+        // Stop watching the acceleration
+        //
+        function stopWatch() {
+            if (watchID) {
+                navigator.accelerometer.clearWatch(watchID);
+                watchID = null;
+            }
+        }
+
+        // onSuccess: Get a snapshot of the current acceleration
+        //
+        function onSuccess(acceleration) {
+            var element = document.getElementById('accelerometer');
+
+            element.innerHTML = 'Acceleration X: ' + acceleration.x + '<br />' +
+                                'Acceleration Y: ' + acceleration.y + '<br />' +
+                                'Acceleration Z: ' + acceleration.z + '<br />' +
+                                'Timestamp: '      + acceleration.timestamp + '<br />';
+        }
+
+        // onError: Failed to get the acceleration
+        //
+        function onError() {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <div id="accelerometer">Waiting for accelerometer...</div>
+            <button onclick="stopWatch();">Stop Watching</button>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/accelerometer/accelerometer.getCurrentAcceleration.md b/docs/en/3.3.0/cordova/accelerometer/accelerometer.getCurrentAcceleration.md
new file mode 100644
index 0000000..19eaf15
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/accelerometer.getCurrentAcceleration.md
@@ -0,0 +1,109 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# accelerometer.getCurrentAcceleration
+
+Get the current acceleration along the _x_, _y_, and _z_ axes.
+
+    navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
+
+## Description
+
+The accelerometer is a motion sensor that detects the change (_delta_)
+in movement relative to the current device orientation, in three
+dimensions along the _x_, _y_, and _z_ axis.
+
+These acceleration values are returned to the `accelerometerSuccess`
+callback function.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(acceleration) {
+        alert('Acceleration X: ' + acceleration.x + '\n' +
+              'Acceleration Y: ' + acceleration.y + '\n' +
+              'Acceleration Z: ' + acceleration.z + '\n' +
+              'Timestamp: '      + acceleration.timestamp + '\n');
+    };
+
+    function onError() {
+        alert('onError!');
+    };
+
+    navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Acceleration Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
+        }
+
+        // onSuccess: Get a snapshot of the current acceleration
+        //
+        function onSuccess(acceleration) {
+            alert('Acceleration X: ' + acceleration.x + '\n' +
+                  'Acceleration Y: ' + acceleration.y + '\n' +
+                  'Acceleration Z: ' + acceleration.z + '\n' +
+                  'Timestamp: '      + acceleration.timestamp + '\n');
+        }
+
+        // onError: Failed to get the acceleration
+        //
+        function onError() {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>getCurrentAcceleration</p>
+      </body>
+    </html>
+
+## iOS Quirks
+
+- iOS doesn't recognize the concept of getting the current acceleration at any given point.
+
+- You must watch the acceleration and capture the data at given time intervals.
+
+- Thus, the `getCurrentAcceleration` function yields the last value reported from a `watchAccelerometer` call.
diff --git a/docs/en/3.3.0/cordova/accelerometer/accelerometer.md b/docs/en/3.3.0/cordova/accelerometer/accelerometer.md
new file mode 100644
index 0000000..255727e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/accelerometer.md
@@ -0,0 +1,86 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Accelerometer
+
+> Captures device motion in the _x_, _y_, and _z_ direction.
+
+## Methods
+
+- accelerometer.getCurrentAcceleration
+- accelerometer.watchAcceleration
+- accelerometer.clearWatch
+
+## Arguments
+
+- accelerometerSuccess
+- accelerometerError
+- accelerometerOptions
+
+## Objects (Read-Only)
+
+- Acceleration
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.device-motion
+        $ cordova plugin ls
+        [ 'org.apache.cordova.device-motion' ]
+        $ cordova plugin rm org.apache.cordova.device-motion
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS (in `res/xml/config.xml`)
+
+        <feature name="Accelerometer">
+            <param name="android-package" value="org.apache.cordova.devicemotion.AccelListener" />
+        </feature>
+
+* Android (in `res/xml/config.xml`)
+
+        <feature name="Accelerometer">
+            <param name="android-package" value="org.apache.cordova.devicemotion.AccelListener" />
+        </feature>
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="Accelerometer" value="Accelerometer" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Accelerometer">
+            <param name="ios-package" value="CDVAccelerometer" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_SENSORS" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/accelerometer/accelerometer.watchAcceleration.md b/docs/en/3.3.0/cordova/accelerometer/accelerometer.watchAcceleration.md
new file mode 100644
index 0000000..c0707c2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/accelerometer.watchAcceleration.md
@@ -0,0 +1,142 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# accelerometer.watchAcceleration
+
+At a regular interval, get the acceleration along the _x_, _y_, and _z_ axis.
+
+    var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
+                                                           accelerometerError,
+                                                           [accelerometerOptions]);
+
+## Description
+
+The accelerometer is a motion sensor that detects the change (delta)
+in movement relative to the current position. The accelerometer can
+detect 3D movement along the _x_, _y_, and _z_ axis.
+
+The `accelerometer.watchAcceleration` method retrieves the device's
+current `Acceleration` at a regular interval, executing the
+`accelerometerSuccess` callback function each time. Specify the
+interval in milliseconds via the `acceleratorOptions` object's
+`frequency` parameter.
+
+The returned watch ID references the accelerometer's watch interval,
+and can be used with `accelerometer.clearWatch` to stop watching the
+accelerometer.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(acceleration) {
+        alert('Acceleration X: ' + acceleration.x + '\n' +
+              'Acceleration Y: ' + acceleration.y + '\n' +
+              'Acceleration Z: ' + acceleration.z + '\n' +
+              'Timestamp: '      + acceleration.timestamp + '\n');
+    };
+
+    function onError() {
+        alert('onError!');
+    };
+
+    var options = { frequency: 3000 };  // Update every 3 seconds
+
+    var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Acceleration Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // The watch id references the current `watchAcceleration`
+        var watchID = null;
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            startWatch();
+        }
+
+        // Start watching the acceleration
+        //
+        function startWatch() {
+
+            // Update acceleration every 3 seconds
+            var options = { frequency: 3000 };
+
+            watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
+        }
+
+        // Stop watching the acceleration
+        //
+        function stopWatch() {
+            if (watchID) {
+                navigator.accelerometer.clearWatch(watchID);
+                watchID = null;
+            }
+        }
+
+        // onSuccess: Get a snapshot of the current acceleration
+        //
+        function onSuccess(acceleration) {
+            var element = document.getElementById('accelerometer');
+            element.innerHTML = 'Acceleration X: ' + acceleration.x         + '<br />' +
+                                'Acceleration Y: ' + acceleration.y         + '<br />' +
+                                'Acceleration Z: ' + acceleration.z         + '<br />' +
+                                'Timestamp: '      + acceleration.timestamp + '<br />';
+        }
+
+        // onError: Failed to get the acceleration
+        //
+        function onError() {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <div id="accelerometer">Waiting for accelerometer...</div>
+      </body>
+    </html>
+
+## iOS Quirks
+
+The API calls the success callback function at the interval requested,
+but restricts the range of requests to the device between 40ms and
+1000ms. For example, if you request an interval of 3 seconds,
+(3000ms), the API requests data from the device every 1 second, but
+only executes the success callback every 3 seconds.
diff --git a/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerError.md b/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerError.md
new file mode 100644
index 0000000..6dda5c2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerError.md
@@ -0,0 +1,26 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# accelerometerError
+
+onError callback function for acceleration functions.
+
+    function() {
+        // Handle the error
+    }
diff --git a/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerOptions.md b/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerOptions.md
new file mode 100644
index 0000000..b9ebcb5
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerOptions.md
@@ -0,0 +1,26 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# accelerometerOptions
+
+An optional parameter to customize the retrieval of accelerometer values.
+
+## Options
+
+- __frequency__: How often to retrieve the `Acceleration` in milliseconds. _(Number)_ (Default: 10000)
diff --git a/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerSuccess.md b/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerSuccess.md
new file mode 100644
index 0000000..c07a617
--- /dev/null
+++ b/docs/en/3.3.0/cordova/accelerometer/parameters/accelerometerSuccess.md
@@ -0,0 +1,39 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# accelerometerSuccess
+
+onSuccess callback function that provides the `Acceleration` information.
+
+    function(acceleration) {
+        // Do something
+    }
+
+## Parameters
+
+- __acceleration__: The acceleration at a single moment in time. (Acceleration)
+
+## Example
+
+    function onSuccess(acceleration) {
+        alert('Acceleration X: ' + acceleration.x + '\n' +
+              'Acceleration Y: ' + acceleration.y + '\n' +
+              'Acceleration Z: ' + acceleration.z + '\n' +
+              'Timestamp: '      + acceleration.timestamp + '\n');
+    };
diff --git a/docs/en/3.3.0/cordova/camera/camera.cleanup.md b/docs/en/3.3.0/cordova/camera/camera.cleanup.md
new file mode 100644
index 0000000..f195e70
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/camera.cleanup.md
@@ -0,0 +1,48 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# camera.cleanup
+
+Removes intermediate photos taken by the camera from temporary
+storage.
+
+    navigator.camera.cleanup( cameraSuccess, cameraError );
+
+## Description
+
+Removes intermediate image files that are kept in temporary storage
+after calling `camera.getPicture`. Applies only when the value of
+`Camera.sourceType` equals `Camera.PictureSourceType.CAMERA` and the
+`Camera.destinationType` equals `Camera.DestinationType.FILE_URI`.
+
+## Supported Platforms
+
+- iOS
+
+## Example
+
+    navigator.camera.cleanup(onSuccess, onFail);
+
+    function onSuccess() {
+        console.log("Camera cleanup success.")
+    }
+
+    function onFail(message) {
+        alert('Failed because: ' + message);
+    }
diff --git a/docs/en/3.3.0/cordova/camera/camera.getPicture.md b/docs/en/3.3.0/cordova/camera/camera.getPicture.md
new file mode 100644
index 0000000..955870d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/camera.getPicture.md
@@ -0,0 +1,255 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# camera.getPicture
+
+Takes a photo using the camera, or retrieves a photo from the device's
+image gallery.  The image is passed to the success callback as a
+base64-encoded `String`, or as the URI for the image file.  The method
+itself returns a `CameraPopoverHandle` object that can be used to
+reposition the file selection popover.
+
+    navigator.camera.getPicture( cameraSuccess, cameraError, [ cameraOptions ] );
+
+## Description
+
+The `camera.getPicture` function opens the device's default camera
+application that allows users to snap pictures. This behavior occurs
+by default, when `Camera.sourceType` equals
+`Camera.PictureSourceType.CAMERA`.  Once the user snaps the photo, the
+camera application closes and the application is restored.
+
+If `Camera.sourceType` is `Camera.PictureSourceType.PHOTOLIBRARY` or
+`Camera.PictureSourceType.SAVEDPHOTOALBUM`, then a dialog displays
+that allows users to select an existing image.  The
+`camera.getPicture` function returns a `CameraPopoverHandle` object,
+which can be used to reposition the image selection dialog, for
+example, when the device orientation changes.
+
+The return value is sent to the `cameraSuccess` callback function, in
+one of the following formats, depending on the specified
+`cameraOptions`:
+
+- A `String` containing the base64-encoded photo image.
+
+- A `String` representing the image file location on local storage (default).
+
+You can do whatever you want with the encoded image or URI, for
+example:
+
+- Render the image in an `<img>` tag, as in the example below
+
+- Save the data locally (`LocalStorage`, [Lawnchair](http://brianleroux.github.com/lawnchair/), etc.)
+
+- Post the data to a remote server
+
+__NOTE__: Photo resolution on newer devices is quite good. Photos
+selected from the device's gallery are not downscaled to a lower
+quality, even if a `quality` parameter is specified.  To avoid common
+memory problems, set `Camera.destinationType` to `FILE_URI` rather
+than `DATA_URL`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Amazon Fire OS Quirks
+
+Amazon Fire OS uses intents to launch the camera activity on the device to capture
+images, and on phones with low memory, the Cordova activity may be killed.  In this
+scenario, the image may not appear when the cordova activity is restored.
+
+## Android Quirks
+
+*Android 4.4 only*: Android 4.4 introduced a new [Storage Access Framework](https://developer.android.com/guide/topics/providers/document-provider.html) that makes it 
+easier for users to browse and open documents across all of their preferred document storage providers.
+Cordova has not yet been fully integrated with this new Storage Access Framework. Because of this, the `getPicture()`
+method will not correctly return pictures when the user selects from the "Recent", "Drive", "Images", or "External
+Storage" folders when the `destinationType` is `FILE_URI`. However, the user will be able to correctly select any pictures
+if they go through the "Gallery" app first. Potential workarounds for this issue are documented on [this StackOverflow question](http://stackoverflow.com/questions/19834842/android-gallery-on-kitkat-returns-different-uri-for-intent-action-get-content/20177611). Please see [CB-5398](https://issues.apache.org/jira/browse/CB-5398) to track this issue. 
+
+Android uses intents to launch the camera activity on the device to capture
+images, and on phones with low memory, the Cordova activity may be killed.  In this
+scenario, the image may not appear when the Cordova activity is restored.
+
+## iOS Quirks
+
+Including a JavaScript `alert()` in either of the callback functions
+can cause problems.  Wrap the alert within a `setTimeout()` to allow
+the iOS image picker or popover to fully close before the alert
+displays:
+
+    setTimeout(function() {
+        // do your thing here!
+    }, 0);
+
+## Windows Phone 7 Quirks
+
+Invoking the native camera application while the device is connected
+via Zune does not work, and triggers an error callback.
+
+## Tizen Quirks
+
+Tizen only supports a `destinationType` of
+`Camera.DestinationType.FILE_URI` and a `sourceType` of
+`Camera.PictureSourceType.PHOTOLIBRARY`.
+
+## Quick Example
+
+Take a photo and retrieve it as a base64-encoded image:
+
+    navigator.camera.getPicture(onSuccess, onFail, { quality: 50,
+        destinationType: Camera.DestinationType.DATA_URL
+    });
+
+    function onSuccess(imageData) {
+        var image = document.getElementById('myImage');
+        image.src = "data:image/jpeg;base64," + imageData;
+    }
+
+    function onFail(message) {
+        alert('Failed because: ' + message);
+    }
+
+Take a photo and retrieve the image's file location:
+
+    navigator.camera.getPicture(onSuccess, onFail, { quality: 50,
+        destinationType: Camera.DestinationType.FILE_URI });
+
+    function onSuccess(imageURI) {
+        var image = document.getElementById('myImage');
+        image.src = imageURI;
+    }
+
+    function onFail(message) {
+        alert('Failed because: ' + message);
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Capture Photo</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        var pictureSource;   // picture source
+        var destinationType; // sets the format of returned value
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready",onDeviceReady,false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            pictureSource=navigator.camera.PictureSourceType;
+            destinationType=navigator.camera.DestinationType;
+        }
+
+        // Called when a photo is successfully retrieved
+        //
+        function onPhotoDataSuccess(imageData) {
+          // Uncomment to view the base64-encoded image data
+          // console.log(imageData);
+
+          // Get image handle
+          //
+          var smallImage = document.getElementById('smallImage');
+
+          // Unhide image elements
+          //
+          smallImage.style.display = 'block';
+
+          // Show the captured photo
+          // The in-line CSS rules are used to resize the image
+          //
+          smallImage.src = "data:image/jpeg;base64," + imageData;
+        }
+
+        // Called when a photo is successfully retrieved
+        //
+        function onPhotoURISuccess(imageURI) {
+          // Uncomment to view the image file URI
+          // console.log(imageURI);
+
+          // Get image handle
+          //
+          var largeImage = document.getElementById('largeImage');
+
+          // Unhide image elements
+          //
+          largeImage.style.display = 'block';
+
+          // Show the captured photo
+          // The in-line CSS rules are used to resize the image
+          //
+          largeImage.src = imageURI;
+        }
+
+        // A button will call this function
+        //
+        function capturePhoto() {
+          // Take picture using device camera and retrieve image as base64-encoded string
+          navigator.camera.getPicture(onPhotoDataSuccess, onFail, { quality: 50,
+            destinationType: destinationType.DATA_URL });
+        }
+
+        // A button will call this function
+        //
+        function capturePhotoEdit() {
+          // Take picture using device camera, allow edit, and retrieve image as base64-encoded string
+          navigator.camera.getPicture(onPhotoDataSuccess, onFail, { quality: 20, allowEdit: true,
+            destinationType: destinationType.DATA_URL });
+        }
+
+        // A button will call this function
+        //
+        function getPhoto(source) {
+          // Retrieve image file location from specified source
+          navigator.camera.getPicture(onPhotoURISuccess, onFail, { quality: 50,
+            destinationType: destinationType.FILE_URI,
+            sourceType: source });
+        }
+
+        // Called if something bad happens.
+        //
+        function onFail(message) {
+          alert('Failed because: ' + message);
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="capturePhoto();">Capture Photo</button> <br>
+        <button onclick="capturePhotoEdit();">Capture Editable Photo</button> <br>
+        <button onclick="getPhoto(pictureSource.PHOTOLIBRARY);">From Photo Library</button><br>
+        <button onclick="getPhoto(pictureSource.SAVEDPHOTOALBUM);">From Photo Album</button><br>
+        <img style="display:none;width:60px;height:60px;" id="smallImage" src="" />
+        <img style="display:none;" id="largeImage" src="" />
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/camera/camera.md b/docs/en/3.3.0/cordova/camera/camera.md
new file mode 100644
index 0000000..a95632f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/camera.md
@@ -0,0 +1,103 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Camera
+
+> The `camera` object provides access to the device's default camera application.
+
+__WARNING__: Collection and use of images from a
+device's camera raises important privacy issues.  Your app's privacy
+policy should discuss how the app uses the camera and whether the
+images recorded are shared with any other parties.  In addition, if
+the app's use of the camera is not apparent in the user interface, you
+should provide a just-in-time notice before the app accesses the
+camera (if the device operating system doesn't do so already).  That
+notice should provide the same information noted above, as well as
+obtaining the user's permission (e.g., by presenting choices for
+__OK__ and __No Thanks__).  For more information, please see the
+Privacy Guide.
+
+## Methods
+
+- camera.getPicture
+- camera.cleanup
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.camera
+        $ cordova plugin ls
+        [ 'org.apache.cordova.camera' ]
+        $ cordova plugin rm org.apache.cordova.camera
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Camera">
+            <param name="android-package" value="org.apache.cordova.camera.CameraLauncher" />
+        </feature>
+
+        (in app/AndroidManifest)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Camera">
+            <param name="android-package" value="org.apache.cordova.camera.CameraLauncher" />
+        </feature>
+
+        (in app/AndroidManifest)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="Camera" value="Camera"/>
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Camera">
+            <param name="ios-package" value="CDVCamera" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_ISV_CAMERA" />
+            <Capability Name="ID_HW_FRONTCAMERA" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+* Tizen (in `config.xml`)
+
+        <feature name="http://tizen.org/api/application" required="true"/>
+        <feature name="http://tizen.org/api/application.launch" required="true"/>
+
+  Reference: [Application Manifest for Tizen Web Application](https://developer.tizen.org/help/topic/org.tizen.help.gs/Creating%20a%20Project.html?path=0_1_1_3#8814682_CreatingaProject-EditingconfigxmlFeatures)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/camera/parameter/CameraPopoverHandle.md b/docs/en/3.3.0/cordova/camera/parameter/CameraPopoverHandle.md
new file mode 100644
index 0000000..594f30b
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/parameter/CameraPopoverHandle.md
@@ -0,0 +1,63 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CameraPopoverHandle
+
+A handle to the popover dialog created by `camera.getPicture`.
+
+## Methods
+
+- __setPosition__: Set the position of the popover.
+
+## Supported Platforms
+
+- iOS
+
+## setPosition
+
+Set the position of the popover.
+
+__Parameters__:
+
+- `cameraPopoverOptions`: the `CameraPopoverOptions` that specify the new position
+
+## Quick Example
+
+     var cameraPopoverOptions = new CameraPopoverOptions(300, 300, 100, 100, Camera.PopoverArrowDirection.ARROW_ANY);
+     cameraPopoverHandle.setPosition(cameraPopoverOptions);
+
+## Full Example
+
+     function onSuccess(imageData) {
+          // Do stuff with the image!
+     }
+
+     function onFail(message) {
+         alert('Failed to get the picture: ' + message);
+     }
+
+     var cameraPopoverHandle = navigator.camera.getPicture(onSuccess, onFail,
+         { destinationType: Camera.DestinationType.FILE_URI,
+           sourceType: Camera.PictureSourceType.PHOTOLIBRARY });
+
+     // Reposition the popover if the orientation changes.
+     window.onorientationchange = function() {
+         var cameraPopoverOptions = new CameraPopoverOptions(0, 0, 100, 100, 0);
+         cameraPopoverHandle.setPosition(cameraPopoverOptions);
+     }
diff --git a/docs/en/3.3.0/cordova/camera/parameter/CameraPopoverOptions.md b/docs/en/3.3.0/cordova/camera/parameter/CameraPopoverOptions.md
new file mode 100644
index 0000000..e5d2902
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/parameter/CameraPopoverOptions.md
@@ -0,0 +1,77 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CameraPopoverOptions
+
+iOS-only parameters that specify the anchor element location and arrow
+direction of the popover when selecting images from an iPad's library
+or album.
+
+    { x : 0,
+      y :  32,
+      width : 320,
+      height : 480,
+      arrowDir : Camera.PopoverArrowDirection.ARROW_ANY
+    };
+
+## CameraPopoverOptions
+
+- __x__: x pixel coordinate of screen element onto which to anchor the popover. _(Number)_
+
+- __y__: y pixel coordinate of screen element onto which to anchor the popover. _(Number)_
+
+- __width__: width, in pixels, of the screen element onto which to anchor the popover. _(Number)_
+
+- __height__: height, in pixels, of the screen element onto which to anchor the popover. _(Number)_
+
+- __arrowDir__: Direction the arrow on the popover should point.  Defined in `Camera.PopoverArrowDirection` _(Number)_
+
+            Camera.PopoverArrowDirection = {
+                ARROW_UP : 1,        // matches iOS UIPopoverArrowDirection constants
+                ARROW_DOWN : 2,
+                ARROW_LEFT : 4,
+                ARROW_RIGHT : 8,
+                ARROW_ANY : 15
+            };
+
+Note that the size of the popover may change to adjust to the
+direction of the arrow and orientation of the screen.  Make sure to
+account for orientation changes when specifying the anchor element
+location.
+
+## Quick Example
+
+     var popover = new CameraPopoverOptions(300, 300, 100, 100, Camera.PopoverArrowDirection.ARROW_ANY);
+     var options = {
+         quality         : 50,
+         destinationType : Camera.DestinationType.DATA_URL,
+         sourceType      : Camera.PictureSource.SAVEDPHOTOALBUM,
+         popoverOptions  : popover
+     };
+
+     navigator.camera.getPicture(onSuccess, onFail, options);
+
+     function onSuccess(imageData) {
+         var image = document.getElementById('myImage');
+         image.src = "data:image/jpeg;base64," + imageData;
+     }
+
+     function onFail(message) {
+         alert('Failed because: ' + message);
+     }
diff --git a/docs/en/3.3.0/cordova/camera/parameter/cameraError.md b/docs/en/3.3.0/cordova/camera/parameter/cameraError.md
new file mode 100644
index 0000000..33d1e32
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/parameter/cameraError.md
@@ -0,0 +1,30 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# cameraError
+
+onError callback function that provides an error message.
+
+    function(message) {
+        // Show a helpful message
+    }
+
+## Parameters
+
+- __message__: The message is provided by the device's native code. _(String)_
diff --git a/docs/en/3.3.0/cordova/camera/parameter/cameraOptions.md b/docs/en/3.3.0/cordova/camera/parameter/cameraOptions.md
new file mode 100644
index 0000000..b011932
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/parameter/cameraOptions.md
@@ -0,0 +1,136 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# cameraOptions
+
+Optional parameters to customize the camera settings.
+
+    { quality : 75,
+      destinationType : Camera.DestinationType.DATA_URL,
+      sourceType : Camera.PictureSourceType.CAMERA,
+      allowEdit : true,
+      encodingType: Camera.EncodingType.JPEG,
+      targetWidth: 100,
+      targetHeight: 100,
+      popoverOptions: CameraPopoverOptions,
+      saveToPhotoAlbum: false };
+
+## Options
+
+- __quality__: Quality of the saved image, expressed as a range of 0-100, where 100 is typically full resolution with no loss from file compression. _(Number)_ (Note that information about the camera's resolution is unavailable.)
+
+- __destinationType__: Choose the format of the return value. Defined in `navigator.camera.DestinationType` _(Number)_
+
+        Camera.DestinationType = {
+            DATA_URL : 0,      // Return image as base64-encoded string
+            FILE_URI : 1,      // Return image file URI
+            NATIVE_URI : 2     // Return image native URI (e.g., assets-library:// on iOS or content:// on Android)
+        };
+
+- __sourceType__: Set the source of the picture.  Defined in `navigator.camera.PictureSourceType` _(Number)_
+
+        Camera.PictureSourceType = {
+            PHOTOLIBRARY : 0,
+            CAMERA : 1,
+            SAVEDPHOTOALBUM : 2
+        };
+
+- __allowEdit__: Allow simple editing of image before selection. _(Boolean)_
+
+- __encodingType__: Choose the  returned image file's encoding.  Defined in `navigator.camera.EncodingType` _(Number)_
+
+        Camera.EncodingType = {
+            JPEG : 0,               // Return JPEG encoded image
+            PNG : 1                 // Return PNG encoded image
+        };
+
+- __targetWidth__: Width in pixels to scale image. Must be used with __targetHeight__.  Aspect ratio remains constant. _(Number)_
+
+- __targetHeight__: Height in pixels to scale image. Must be used with __targetWidth__. Aspect ratio remains constant. _(Number)_
+
+- __mediaType__: Set the type of media to select from.  Only works when `PictureSourceType` is `PHOTOLIBRARY` or `SAVEDPHOTOALBUM`. Defined in `nagivator.camera.MediaType` _(Number)_
+
+        Camera.MediaType = {
+            PICTURE: 0,    // allow selection of still pictures only. DEFAULT. Will return format specified via DestinationType
+            VIDEO: 1,      // allow selection of video only, WILL ALWAYS RETURN FILE_URI
+            ALLMEDIA : 2   // allow selection from all media types
+};
+
+- __correctOrientation__: Rotate the image to correct for the orientation of the device during capture. _(Boolean)_
+
+- __saveToPhotoAlbum__: Save the image to the photo album on the device after capture. _(Boolean)_
+
+- __popoverOptions__: iOS-only options that specify popover location in iPad.  Defined in `CameraPopoverOptions`.
+
+- __cameraDirection__: Choose the camera to use (front- or back-facing).  Defined in `navigator.camera.Direction` _(Number)_
+
+        Camera.Direction = {
+            BACK : 0,      // Use the back-facing camera
+            FRONT : 1      // Use the front-facing camera
+        };
+
+## Amazon Fire OSQuirks
+
+- Any `cameraDirection` value results in a back-facing photo.
+
+- Ignores the `allowEdit` parameter.
+
+- `Camera.PictureSourceType.PHOTOLIBRARY` and `Camera.PictureSourceType.SAVEDPHOTOALBUM` both display the same photo album.
+
+## Android Quirks
+
+- Any `cameraDirection` value results in a back-facing photo.
+
+- Ignores the `allowEdit` parameter.
+
+- `Camera.PictureSourceType.PHOTOLIBRARY` and `Camera.PictureSourceType.SAVEDPHOTOALBUM` both display the same photo album.
+
+## BlackBerry 10 Quirks
+
+- Ignores the `quality` parameter.
+
+- Ignores the `sourceType` parameter.
+
+- Ignores the `allowEdit` parameter.
+
+- `Camera.MediaType` is not supported.
+
+- Ignores the `correctOrientation` parameter.
+
+- Ignores the `cameraDirection` parameter.
+
+## iOS Quirks
+
+- Set `quality` below 50 to avoid memory errors on some devices.
+
+- When using `destinationType.FILE_URI`, photos are saved in the application's temporary directory.  You may delete the contents of this directory using the `navigator.fileMgr` APIs if storage space is a concern.
+
+## Tizen Quirks
+
+- options not supported
+
+- always returns a FILE URI
+
+## Windows Phone 7 and 8 Quirks
+
+- Ignores the `allowEdit` parameter.
+
+- Ignores the `correctOrientation` parameter.
+
+- Ignores the `cameraDirection` parameter.
diff --git a/docs/en/3.3.0/cordova/camera/parameter/cameraSuccess.md b/docs/en/3.3.0/cordova/camera/parameter/cameraSuccess.md
new file mode 100644
index 0000000..89d7ece
--- /dev/null
+++ b/docs/en/3.3.0/cordova/camera/parameter/cameraSuccess.md
@@ -0,0 +1,39 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# cameraSuccess
+
+onSuccess callback function that provides the image data.
+
+    function(imageData) {
+        // Do something with the image
+    }
+
+## Parameters
+
+- __imageData__: Base64 encoding of the image data, _or_ the image file URI, depending on `cameraOptions` in effect. _(String)_
+
+## Example
+
+    // Show image
+    //
+    function cameraCallback(imageData) {
+        var image = document.getElementById('myImage');
+        image.src = "data:image/jpeg;base64," + imageData;
+    }
diff --git a/docs/en/3.3.0/cordova/compass/compass.clearWatch.md b/docs/en/3.3.0/cordova/compass/compass.clearWatch.md
new file mode 100755
index 0000000..32adfab
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compass.clearWatch.md
@@ -0,0 +1,108 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compass.clearWatch
+
+Stop watching the compass referenced by the watch ID parameter.
+
+    navigator.compass.clearWatch(watchID);
+
+- __watchID__: The ID returned by `compass.watchHeading`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8 (if available in hardware)
+- Windows 8
+
+## Quick Example
+
+    var watchID = navigator.compass.watchHeading(onSuccess, onError, options);
+
+    // ... later on ...
+
+    navigator.compass.clearWatch(watchID);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Compass Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // The watch id references the current `watchHeading`
+        var watchID = null;
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            startWatch();
+        }
+
+        // Start watching the compass
+        //
+        function startWatch() {
+
+            // Update compass every 3 seconds
+            var options = { frequency: 3000 };
+
+            watchID = navigator.compass.watchHeading(onSuccess, onError, options);
+        }
+
+        // Stop watching the compass
+        //
+        function stopWatch() {
+            if (watchID) {
+                navigator.compass.clearWatch(watchID);
+                watchID = null;
+            }
+        }
+
+        // onSuccess: Get the current heading
+        //
+        function onSuccess(heading) {
+            var element = document.getElementById('heading');
+            element.innerHTML = 'Heading: ' + heading.magneticHeading;
+        }
+
+        // onError: Failed to get the heading
+        //
+        function onError(compassError) {
+            alert('Compass error: ' + compassError.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <div id="heading">Waiting for heading...</div>
+        <button onclick="startWatch();">Start Watching</button>
+        <button onclick="stopWatch();">Stop Watching</button>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/compass/compass.clearWatchFilter.md b/docs/en/3.3.0/cordova/compass/compass.clearWatchFilter.md
new file mode 100644
index 0000000..3a0e58e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compass.clearWatchFilter.md
@@ -0,0 +1,22 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compass.clearWatchFilter
+
+No longer supported as of 1.6.  See `compass.clearWatch`.
diff --git a/docs/en/3.3.0/cordova/compass/compass.getCurrentHeading.md b/docs/en/3.3.0/cordova/compass/compass.getCurrentHeading.md
new file mode 100755
index 0000000..5e64ec2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compass.getCurrentHeading.md
@@ -0,0 +1,96 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compass.getCurrentHeading
+
+Get the current compass heading.
+
+    navigator.compass.getCurrentHeading(compassSuccess, compassError, compassOptions);
+
+## Description
+
+The compass is a sensor that detects the direction or heading that the
+device is pointed, typically from the top of the device.  It measures
+the heading in degrees from 0 to 359.99, where 0 is north.
+
+The compass heading information is returned via a `CompassHeading`
+object using the `compassSuccess` callback function.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8 (if available in hardware)
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(heading) {
+        alert('Heading: ' + heading.magneticHeading);
+    };
+
+    function onError(error) {
+        alert('CompassError: ' + error.code);
+    };
+
+    navigator.compass.getCurrentHeading(onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Compass Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.compass.getCurrentHeading(onSuccess, onError);
+        }
+
+        // onSuccess: Get the current heading
+        //
+        function onSuccess(heading) {
+            alert('Heading: ' + heading.magneticHeading);
+        }
+
+        // onError: Failed to get the heading
+        //
+        function onError(compassError) {
+            alert('Compass Error: ' + compassError.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>getCurrentHeading</p>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/compass/compass.md b/docs/en/3.3.0/cordova/compass/compass.md
new file mode 100755
index 0000000..90c7712
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compass.md
@@ -0,0 +1,100 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Compass
+
+> Obtains the direction that the device is pointing.
+
+## Methods
+
+- compass.getCurrentHeading
+- compass.watchHeading
+- compass.clearWatch
+- compass.watchHeadingFilter (obsolete)
+- compass.clearWatchFilter   (obsolete)
+
+## Arguments
+
+- compassSuccess
+- compassError
+- compassOptions
+- compassHeading
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.device-orientation
+        $ cordova plugin ls
+        [ 'org.apache.cordova.device-orientation' ]
+        $ cordova plugin rm org.apache.cordova.device-orientation
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in `app/res/xml/config.xml`)
+
+        <feature name="Compass">
+            <param name="android-package" value="org.apache.cordova.deviceorientation.CompassListener" />
+        </feature>
+
+        (in app/AndroidManifest)
+
+        <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
+        <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
+
+* Android
+
+        (in `app/res/xml/config.xml`)
+
+        <feature name="Compass">
+            <param name="android-package" value="org.apache.cordova.deviceorientation.CompassListener" />
+        </feature>
+
+        (in app/AndroidManifest)
+
+        <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
+        <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
+
+* BlackBerry 10
+ 
+        (in `www/config.xml`)
+
+        <feature name="Compass" value="Comapss" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Compass">
+            <param name="ios-package" value="CDVLocation" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_SENSORS" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/compass/compass.watchHeading.md b/docs/en/3.3.0/cordova/compass/compass.watchHeading.md
new file mode 100755
index 0000000..d0a2371
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compass.watchHeading.md
@@ -0,0 +1,148 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compass.watchHeading
+
+At a regular interval, get the compass heading in degrees.
+
+    var watchID = navigator.compass.watchHeading(compassSuccess, compassError, [compassOptions]);
+
+## Description
+
+The compass is a sensor that detects the direction or heading that the
+device is pointed.  It measures the heading in degrees from 0 to
+359.99.
+
+The `compass.watchHeading` gets the device's current heading at a
+regular interval. Each time the heading is retrieved, the
+`headingSuccess` callback function is executed. Specify the interval
+in milliseconds via the `frequency` parameter in the `compassOptions`
+object.
+
+The returned watch ID references the compass watch interval. The watch
+ID can be used with `compass.clearWatch` to stop watching the compass.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8 (if available in hardware)
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(heading) {
+        var element = document.getElementById('heading');
+        element.innerHTML = 'Heading: ' + heading.magneticHeading;
+    };
+
+    function onError(compassError) {
+        alert('Compass error: ' + compassError.code);
+    };
+
+    var options = {
+        frequency: 3000
+    }; // Update every 3 seconds
+
+    var watchID = navigator.compass.watchHeading(onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Compass Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // The watch id references the current `watchHeading`
+        var watchID = null;
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            startWatch();
+        }
+
+        // Start watching the compass
+        //
+        function startWatch() {
+
+            // Update compass every 3 seconds
+            var options = { frequency: 3000 };
+
+            watchID = navigator.compass.watchHeading(onSuccess, onError, options);
+        }
+
+        // Stop watching the compass
+        //
+        function stopWatch() {
+            if (watchID) {
+                navigator.compass.clearWatch(watchID);
+                watchID = null;
+            }
+        }
+
+        // onSuccess: Get the current heading
+        //
+        function onSuccess(heading) {
+            var element = document.getElementById('heading');
+            element.innerHTML = 'Heading: ' + heading.magneticHeading;
+        }
+
+        // onError: Failed to get the heading
+        //
+        function onError(compassError) {
+            alert('Compass error: ' + compassError.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <div id="heading">Waiting for heading...</div>
+        <button onclick="startWatch();">Start Watching</button>
+        <button onclick="stopWatch();">Stop Watching</button>
+      </body>
+    </html>
+
+## iOS Quirks
+
+In iOS `compass.watchHeading` can also get the device's current
+heading when it changes by a specified number of degrees. Each time
+the heading changes by the specified number of degrees or more, the
+`headingSuccess` callback function executes. Specify the degrees of
+change via the `filter` parameter in the `compassOptions` object.
+Clear the watch as usual by passing the returned watch ID to
+`compass.clearWatch`.  This functionality replaces the previously
+separate, iOS-only `watchHeadingFilter` and `clearWatchFilter`
+functions, which were removed in version 1.6.
+
+Only one `watchHeading` can be in effect at one time in iOS.  If a
+`watchHeading` uses a filter, calling `getCurrentHeading` or
+`watchHeading` uses the existing filter value to specify heading
+changes. Watching heading changes with a filter is more efficient than
+with time intervals.
diff --git a/docs/en/3.3.0/cordova/compass/compass.watchHeadingFilter.md b/docs/en/3.3.0/cordova/compass/compass.watchHeadingFilter.md
new file mode 100644
index 0000000..62483f3
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compass.watchHeadingFilter.md
@@ -0,0 +1,22 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compass.watchHeadingFilter
+
+No longer supported as of 1.6, see `compass.watchHeading` for equivalent functionality.
diff --git a/docs/en/3.3.0/cordova/compass/compassError/compassError.md b/docs/en/3.3.0/cordova/compass/compassError/compassError.md
new file mode 100644
index 0000000..c405431
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/compassError/compassError.md
@@ -0,0 +1,36 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CompassError
+
+A `CompassError` object is returned to the `compassError` callback function when an error occurs.
+
+## Properties
+
+- __code__: One of the predefined error codes listed below.
+
+## Constants
+
+- `CompassError.COMPASS_INTERNAL_ERR`
+- `CompassError.COMPASS_NOT_SUPPORTED`
+
+## Description
+
+When an error occurs, the `CompassError` object is passed as a
+parameter to a `compassError` callback function.
diff --git a/docs/en/3.3.0/cordova/compass/parameters/compassError.md b/docs/en/3.3.0/cordova/compass/parameters/compassError.md
new file mode 100755
index 0000000..59d68b7
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/parameters/compassError.md
@@ -0,0 +1,28 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compassError
+
+onError callback function for compass functions.
+
+## Example
+
+    function(CompassError) {
+        // Handle the error
+    }
diff --git a/docs/en/3.3.0/cordova/compass/parameters/compassHeading.md b/docs/en/3.3.0/cordova/compass/parameters/compassHeading.md
new file mode 100644
index 0000000..ec53abf
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/parameters/compassHeading.md
@@ -0,0 +1,54 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compassHeading
+
+A `CompassHeading` object is returned to the `compassSuccess` callback function.
+
+## Properties
+
+- __magneticHeading__: The heading in degrees from 0-359.99 at a single moment in time. _(Number)_
+
+- __trueHeading__: The heading relative to the geographic North Pole in degrees 0-359.99 at a single moment in time. A negative value indicates that the true heading can't be determined.  _(Number)_
+
+- __headingAccuracy__: The deviation in degrees between the reported heading and the true heading. _(Number)_
+
+- __timestamp__: The time at which this heading was determined.  _(milliseconds)_
+
+## Description
+
+The `CompassHeading` object is returned to the `compassSuccess` callback function.
+
+## Amazon Fire OS Quirks
+
+- `trueHeading` is not supported, but reports the same value as `magneticHeading`
+
+- `headingAccuracy` is always 0 because there is no difference between the `magneticHeading` and `trueHeading`
+
+## Android Quirks
+
+- The `trueHeading` property is not supported, but reports the same value as `magneticHeading`.
+
+- The `headingAccuracy` property is always 0 because there is no difference between the `magneticHeading` and `trueHeading`.
+
+## iOS Quirks
+
+- The `trueHeading` property is only returned for location services enabled via `navigator.geolocation.watchLocation()`.
+
+- For iOS 4 devices and above, heading factors in the device's current orientation, and does not reference its absolute position, for apps that supports that orientation.
diff --git a/docs/en/3.3.0/cordova/compass/parameters/compassOptions.md b/docs/en/3.3.0/cordova/compass/parameters/compassOptions.md
new file mode 100755
index 0000000..764cbb1
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/parameters/compassOptions.md
@@ -0,0 +1,44 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compassOptions
+
+An optional parameter to customize the retrieval of the compass.
+
+## Options
+
+- __frequency__: How often to retrieve the compass heading in milliseconds. _(Number)_ (Default: 100)
+
+- __filter__: The change in degrees required to initiate a watchHeading success callback. _(Number)_
+
+## Amazon Fire OS Quirks
+
+- `filter` is not supported.
+
+## Android Quirks
+
+- No support for `filter`.
+
+## Tizen Quirks
+
+- No support for `filter`.
+
+## Windows Phone 7 and 8 Quirks
+
+- No support for `filter`.
diff --git a/docs/en/3.3.0/cordova/compass/parameters/compassSuccess.md b/docs/en/3.3.0/cordova/compass/parameters/compassSuccess.md
new file mode 100644
index 0000000..e814959
--- /dev/null
+++ b/docs/en/3.3.0/cordova/compass/parameters/compassSuccess.md
@@ -0,0 +1,36 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# compassSuccess
+
+onSuccess callback function that provides the compass heading information via a `compassHeading` object.
+
+    function(heading) {
+        // Do something
+    }
+
+## Parameters
+
+- __heading__: The heading information. _(compassHeading)_
+
+## Example
+
+    function onSuccess(heading) {
+        alert('Heading: ' + heading.magneticHeading);
+    };
diff --git a/docs/en/3.3.0/cordova/connection/connection.md b/docs/en/3.3.0/cordova/connection/connection.md
new file mode 100644
index 0000000..76c736f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/connection/connection.md
@@ -0,0 +1,99 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Connection
+
+> The `connection` object, exposed via `navigator.connection`,  provides information about the device's cellular and wifi connection.
+
+## Properties
+
+- connection.type
+
+## Constants
+
+- Connection.UNKNOWN
+- Connection.ETHERNET
+- Connection.WIFI
+- Connection.CELL_2G
+- Connection.CELL_3G
+- Connection.CELL_4G
+- Connection.CELL
+- Connection.NONE
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.network-information
+        $ cordova plugin ls
+        [ 'org.apache.cordova.network-information' ]
+        $ cordova plugin rm org.apache.cordova.network-information
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="NetworkStatus">
+            <param name="android-package" value="org.apache.cordova.networkinformation.NetworkManager" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="NetworkStatus">
+            <param name="android-package" value="org.apache.cordova.networkinformation.NetworkManager" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="NetworkStatus" value="NetworkStatus"/>
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="NetworkStatus">
+            <param name="ios-package" value="CDVConnection" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_NETWORKING" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+* Tizen (in `config.xml`)
+
+        <feature name="http://tizen.org/api/systeminfo" required="true"/>
+
+  Reference: [Application Manifest for Tizen Web Application](https://developer.tizen.org/help/topic/org.tizen.help.gs/Creating%20a%20Project.html?path=0_1_1_3#8814682_CreatingaProject-EditingconfigxmlFeatures)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/connection/connection.type.md b/docs/en/3.3.0/cordova/connection/connection.type.md
new file mode 100644
index 0000000..5bc8ae6
--- /dev/null
+++ b/docs/en/3.3.0/cordova/connection/connection.type.md
@@ -0,0 +1,125 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# connection.type
+
+Checks the currently active network connection.
+
+## Description
+
+This property offers a fast way to determine the device's network
+connection state, and type of connection.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- iOS
+- Android
+- BlackBerry 10
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function checkConnection() {
+        var networkState = navigator.connection.type;
+
+        var states = {};
+        states[Connection.UNKNOWN]  = 'Unknown connection';
+        states[Connection.ETHERNET] = 'Ethernet connection';
+        states[Connection.WIFI]     = 'WiFi connection';
+        states[Connection.CELL_2G]  = 'Cell 2G connection';
+        states[Connection.CELL_3G]  = 'Cell 3G connection';
+        states[Connection.CELL_4G]  = 'Cell 4G connection';
+        states[Connection.CELL]     = 'Cell generic connection';
+        states[Connection.NONE]     = 'No network connection';
+
+        alert('Connection type: ' + states[networkState]);
+    }
+
+    checkConnection();
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>navigator.connection.type Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            checkConnection();
+        }
+
+            function checkConnection() {
+                var networkState = navigator.connection.type;
+
+                var states = {};
+                states[Connection.UNKNOWN]  = 'Unknown connection';
+                states[Connection.ETHERNET] = 'Ethernet connection';
+                states[Connection.WIFI]     = 'WiFi connection';
+                states[Connection.CELL_2G]  = 'Cell 2G connection';
+                states[Connection.CELL_3G]  = 'Cell 3G connection';
+                states[Connection.CELL_4G]  = 'Cell 4G connection';
+                states[Connection.CELL]     = 'Cell generic connection';
+                states[Connection.NONE]     = 'No network connection';
+
+                alert('Connection type: ' + states[networkState]);
+            }
+
+        </script>
+      </head>
+      <body>
+        <p>A dialog box will report the network state.</p>
+      </body>
+    </html>
+
+## API Change
+
+Until Cordova 2.3.0, the `Connection` object was accessed via
+`navigator.network.connection`, after which it was changed to
+`navigator.connection` to match the W3C specification.  It's still
+available at its original location, but is deprecated and will
+eventually be removed.
+
+## iOS Quirks
+
+- iOS can't detect the type of cellular network connection.
+    - `navigator.connection.type` is set to `Connection.CELL` for all cellular data.
+
+## Windows Phone Quirks
+
+- When running in the emulator, always detects `navigator.connection.type` as `Connection.UNKNOWN`.
+
+- Windows Phone can't detect the type of cellular network connection.
+    - `navigator.connection.type` is set to `Connection.CELL` for all cellular data.
+
+## Tizen Quirks
+
+- Tizen can only detect a WiFi or cellular connection.
+    - `navigator.connection.type` is set to `Connection.CELL_2G` for all cellular data.
diff --git a/docs/en/3.3.0/cordova/contacts/Contact/contact.md b/docs/en/3.3.0/cordova/contacts/Contact/contact.md
new file mode 100644
index 0000000..8694c09
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/Contact/contact.md
@@ -0,0 +1,257 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Contact
+
+Contains properties that describe a contact, such as a user's personal or business contact.
+
+## Properties
+
+- __id__: A globally unique identifier. _(DOMString)_
+
+- __displayName__: The name of this Contact, suitable for display to end users. _(DOMString)_
+
+- __name__: An object containing all components of a persons name. _(ContactName)_
+
+- __nickname__: A casual name by which to address the contact. _(DOMString)_
+
+- __phoneNumbers__: An array of all the contact's phone numbers. _(ContactField[])_
+
+- __emails__: An array of all the contact's email addresses. _(ContactField[])_
+
+- __addresses__: An array of all the contact's addresses. _(ContactAddress[])_
+
+- __ims__: An array of all the contact's IM addresses. _(ContactField[])_
+
+- __organizations__: An array of all the contact's organizations. _(ContactOrganization[])_
+
+- __birthday__: The birthday of the contact. _(Date)_
+
+- __note__: A note about the contact. _(DOMString)_
+
+- __photos__: An array of the contact's photos. _(ContactField[])_
+
+- __categories__:  An array of all the user-defined categories associated with the contact. _(ContactField[])_
+
+- __urls__:  An array of web pages associated with the contact. _(ContactField[])_
+
+## Methods
+
+- __clone__: Returns a new `Contact` object that is a deep copy of the calling object, with the `id` property set to `null`.
+
+- __remove__: Removes the contact from the device contacts database, otherwise executes an error callback with a `ContactError` object.
+
+- __save__: Saves a new contact to the device contacts database, or updates an existing contact if a contact with the same __id__ already exists.
+
+## Details
+
+The `Contact` object represents a user's contact.  Contacts can be
+created, stored, or removed from the device contacts database.
+Contacts can also be retrieved (individually or in bulk) from the
+database by invoking the `contacts.find` method.
+
+__NOTE__: Not all of the contact fields listed above are supported on
+every device platform.  Please check each platform's _Quirks_ section
+for details.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Save Quick Example
+
+    function onSuccess(contact) {
+        alert("Save Success");
+    };
+
+    function onError(contactError) {
+        alert("Error = " + contactError.code);
+    };
+
+    // create a new contact object
+    var contact = navigator.contacts.create();
+    contact.displayName = "Plumber";
+    contact.nickname = "Plumber";            // specify both to support all devices
+
+    // populate some fields
+    var name = new ContactName();
+    name.givenName = "Jane";
+    name.familyName = "Doe";
+    contact.name = name;
+
+    // save to device
+    contact.save(onSuccess,onError);
+
+## Clone Quick Example
+
+        // clone the contact object
+        var clone = contact.clone();
+        clone.name.givenName = "John";
+        console.log("Original contact name = " + contact.name.givenName);
+        console.log("Cloned contact name = " + clone.name.givenName);
+
+## Remove Quick Example
+
+    function onSuccess() {
+        alert("Removal Success");
+    };
+
+    function onError(contactError) {
+        alert("Error = " + contactError.code);
+    };
+
+        // remove the contact from the device
+        contact.remove(onSuccess,onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // create
+            var contact = navigator.contacts.create();
+            contact.displayName = "Plumber";
+            contact.nickname = "Plumber";                 // specify both to support all devices
+            var name = new ContactName();
+            name.givenName = "Jane";
+            name.familyName = "Doe";
+            contact.name = name;
+
+            // save
+            contact.save(onSaveSuccess,onSaveError);
+
+            // clone
+            var clone = contact.clone();
+            clone.name.givenName = "John";
+            console.log("Original contact name = " + contact.name.givenName);
+            console.log("Cloned contact name = " + clone.name.givenName);
+
+            // remove
+            contact.remove(onRemoveSuccess,onRemoveError);
+        }
+
+        // onSaveSuccess: Get a snapshot of the current contacts
+        //
+        function onSaveSuccess(contact) {
+            alert("Save Success");
+        }
+
+        // onSaveError: Failed to get the contacts
+        //
+        function onSaveError(contactError) {
+            alert("Error = " + contactError.code);
+        }
+
+        // onRemoveSuccess: Get a snapshot of the current contacts
+        //
+        function onRemoveSuccess(contacts) {
+            alert("Removal Success");
+        }
+
+        // onRemoveError: Failed to get the contacts
+        //
+        function onRemoveError(contactError) {
+            alert("Error = " + contactError.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Find Contacts</p>
+      </body>
+    </html>
+
+## Android 2.X Quirks
+
+- __categories__:  Not supported on Android 2.X devices, returning `null`.
+
+## BlackBerry 10 Quirks
+
+- __id__: Supported.  Assigned by the device when saving the contact.
+
+- __displayName__: Supported.  Stored in BlackBerry __user1__ field.
+
+- __nickname__: Not supported, returning `null`.
+
+- __phoneNumbers__: Partially supported.  Phone numbers are stored in BlackBerry fields __homePhone1__ and __homePhone2__ if _type_ is 'home', __workPhone1__ and __workPhone2__ if _type_ is 'work', __mobilePhone__ if _type_ is 'mobile', __faxPhone__ if _type_ is 'fax', __pagerPhone__ if _type_ is 'pager', and __otherPhone__ if _type_ is none of the above.
+
+- __emails__: Partially supported.  The first three email addresses are stored in the BlackBerry __email1__, __email2__, and __email3__ fields, respectively.
+
+- __addresses__: Partially supported.  The first and second addresses are stored in the BlackBerry __homeAddress__ and __workAddress__ fields, respectively.
+
+- __ims__: Not supported, returning `null`.
+
+- __organizations__: Partially supported.  The __name__ and __title__ of the first organization are stored in the BlackBerry __company__ and __title__ fields, respectively.
+
+- __photos__: Partially supported.  A single thumbnail-sized photo is supported.  To set a contact's photo, pass in a either a base64-encoded image, or a URL pointing to the image.  The image is scaled down before saving to the BlackBerry contacts database.   The contact photo is returned as a base64-encoded image.
+
+- __categories__:  Partially supported.  Only _Business_ and _Personal_ categories are supported.
+
+- __urls__:  Partially supported. The first URL is stored in BlackBerry __webpage__ field.
+
+## iOS Quirks
+
+- __displayName__: Not supported on iOS, returning `null` unless there is no `ContactName` specified, in which case it returns the composite name, __nickname__ or `""`, respectively.
+
+- __birthday__: Must be input as a JavaScript `Date` object, the same way it is returned.
+
+- __photos__: Returns a File URL to the image, which is stored in the application's temporary directory.  Contents of the temporary directory are removed when the application exits.
+
+- __categories__:  This property is currently not supported, returning `null`.
+
+## Windows Phone 7 and 8 Quirks
+
+- __displayName__: When creating a contact, the value provided for the display name parameter differs from the display name retrieved when finding the contact.
+
+- __urls__: When creating a contact, users can input and save more than one web address, but only one is available when searching the contact.
+
+- __phoneNumbers__: The _pref_ option is not supported. The _type_ is not supported in a _find_ operation. Only one `phoneNumber` is allowed for each _type_.
+
+- __emails__: The _pref_ option is not supported. Home and personal references same email entry. Only one entry is allowed for each _type_.
+
+- __addresses__: Supports only work, and home/personal _type_. The home and personal _type_ reference the same address entry. Only one entry is allowed for each _type_.
+
+- __organizations__: Only one is allowed, and does not support the _pref_, _type_, and _department_ attributes.
+
+- __note__: Not supported, returning `null`.
+
+- __ims__: Not supported, returning `null`.
+
+- __birthdays__: Not supported, returning `null`.
+
+- __categories__: Not supported, returning `null`.
+
diff --git a/docs/en/3.3.0/cordova/contacts/ContactAddress/contactaddress.md b/docs/en/3.3.0/cordova/contacts/ContactAddress/contactaddress.md
new file mode 100644
index 0000000..6eab561
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/ContactAddress/contactaddress.md
@@ -0,0 +1,169 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ContactAddress
+
+Contains address properties for a `Contact` object.
+
+## Properties
+
+- __pref__: Set to `true` if this `ContactAddress` contains the user's preferred value. _(boolean)_
+
+- __type__: A string indicating what type of field this is, _home_ for example. _(DOMString)_
+
+- __formatted__: The full address formatted for display. _(DOMString)_
+
+- __streetAddress__: The full street address. _(DOMString)_
+
+- __locality__: The city or locality. _(DOMString)_
+
+- __region__: The state or region. _(DOMString)_
+
+- __postalCode__: The zip code or postal code. _(DOMString)_
+
+- __country__: The country name. _(DOMString)_
+
+## Details
+
+The `ContactAddress` object stores the properties of a single address
+of a contact.  A `Contact` object may include more than one address in
+a `ContactAddress[]` array.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // display the address information for all contacts
+
+    function onSuccess(contacts) {
+        for (var i = 0; i < contacts.length; i++) {
+            for (var j = 0; j < contacts[i].addresses.length; j++) {
+                alert("Pref: "         + contacts[i].addresses[j].pref          + "\n" +
+                    "Type: "           + contacts[i].addresses[j].type          + "\n" +
+                    "Formatted: "      + contacts[i].addresses[j].formatted     + "\n" +
+                    "Street Address: " + contacts[i].addresses[j].streetAddress + "\n" +
+                    "Locality: "       + contacts[i].addresses[j].locality      + "\n" +
+                    "Region: "         + contacts[i].addresses[j].region        + "\n" +
+                    "Postal Code: "    + contacts[i].addresses[j].postalCode    + "\n" +
+                    "Country: "        + contacts[i].addresses[j].country);
+            }
+        }
+    };
+
+    function onError(contactError) {
+        alert('onError!');
+    };
+
+    // find all contacts
+    var options = new ContactFindOptions();
+    options.filter = "";
+    var filter = ["displayName", "addresses"];
+    navigator.contacts.find(filter, onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // find all contacts
+            var options = new ContactFindOptions();
+            options.filter = "";
+            var filter = ["displayName", "addresses"];
+            navigator.contacts.find(filter, onSuccess, onError, options);
+        }
+
+        // onSuccess: Get a snapshot of the current contacts
+        //
+        function onSuccess(contacts) {
+            // display the address information for all contacts
+            for (var i = 0; i < contacts.length; i++) {
+                for (var j = 0; j < contacts[i].addresses.length; j++) {
+                    alert("Pref: "           + contacts[i].addresses[j].pref          + "\n" +
+                          "Type: "           + contacts[i].addresses[j].type          + "\n" +
+                          "Formatted: "      + contacts[i].addresses[j].formatted     + "\n" +
+                          "Street Address: " + contacts[i].addresses[j].streetAddress + "\n" +
+                          "Locality: "       + contacts[i].addresses[j].locality      + "\n" +
+                          "Region: "         + contacts[i].addresses[j].region        + "\n" +
+                          "Postal Code: "    + contacts[i].addresses[j].postalCode    + "\n" +
+                          "Country: "        + contacts[i].addresses[j].country);
+                }
+            }
+        };
+
+        // onError: Failed to get the contacts
+        //
+        function onError(contactError) {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Find Contacts</p>
+      </body>
+    </html>
+
+## Android 2.X Quirks
+
+- __pref__: Not supported, returning `false` on Android 2.X devices.
+
+## BlackBerry 10 Quirks
+
+- __pref__: Not supported on BlackBerry devices, returning `false`.
+
+- __type__: Partially supported.  Only one each of _Work_ and _Home_ type addresses can be stored per contact.
+
+- __formatted__: Partially supported.  Returns a concatenation of all BlackBerry address fields.
+
+- __streetAddress__: Supported.  Returns a concatenation of BlackBerry __address1__ and __address2__ address fields.
+
+- __locality__: Supported.  Stored in BlackBerry __city__ address field.
+
+- __region__: Supported.  Stored in BlackBerry __stateProvince__ address field.
+
+- __postalCode__: Supported.  Stored in BlackBerry __zipPostal__ address field.
+
+- __country__: Supported.
+
+## iOS Quirks
+
+- __pref__: Not supported on iOS devices, returning `false`.
+
+- __formatted__: Currently not supported.
+
diff --git a/docs/en/3.3.0/cordova/contacts/ContactError/contactError.md b/docs/en/3.3.0/cordova/contacts/ContactError/contactError.md
new file mode 100644
index 0000000..e6bc46b
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/ContactError/contactError.md
@@ -0,0 +1,42 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ContactError
+
+A `ContactError` object is passed to the `contactError` callback when an error occurs.
+
+## Properties
+
+- __code__: One of the predefined error codes listed below.
+
+## Constants
+
+- `ContactError.UNKNOWN_ERROR`
+- `ContactError.INVALID_ARGUMENT_ERROR`
+- `ContactError.TIMEOUT_ERROR`
+- `ContactError.PENDING_OPERATION_ERROR`
+- `ContactError.IO_ERROR`
+- `ContactError.NOT_SUPPORTED_ERROR`
+- `ContactError.PERMISSION_DENIED_ERROR`
+
+## Description
+
+The `ContactError` object is returned to the user through the
+`contactError` callback function when an error occurs.
+
diff --git a/docs/en/3.3.0/cordova/contacts/ContactField/contactfield.md b/docs/en/3.3.0/cordova/contacts/ContactField/contactfield.md
new file mode 100644
index 0000000..9757b6e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/ContactField/contactfield.md
@@ -0,0 +1,156 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ContactField
+
+Supports generic fields in a `Contact` object.  Some properties stored
+as `ContactField` objects include email addresses, phone numbers, and
+URLs.
+
+## Properties
+
+- __type__: A string that indicates what type of field this is, _home_ for example. _(DOMString)_
+
+- __value__: The value of the field, such as a phone number or email address. _(DOMString)_
+
+- __pref__: Set to `true` if this `ContactField` contains the user's preferred value. _(boolean)_
+
+## Details
+
+The `ContactField` object is a reusable component that represents
+contact fields generically.  Each `ContactField` object contains a
+`value`, `type`, and `pref` property.  A `Contact` object stores
+several properties in `ContactField[]` arrays, such as phone numbers
+and email addresses.
+
+In most instances, there are no pre-determined values for a
+`ContactField` object's __type__ attribute.  For example, a phone
+number can specify __type__ values of _home_, _work_, _mobile_,
+_iPhone_, or any other value that is supported by a particular device
+platform's contact database.  However, for the `Contact` __photos__
+field, the __type__ field indicates the format of the returned image:
+__url__ when the __value__ attribute contains a URL to the photo
+image, or _base64_ when the __value__ contains a base64-encoded image
+string.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+        // create a new contact
+        var contact = navigator.contacts.create();
+
+        // store contact phone numbers in ContactField[]
+        var phoneNumbers = [];
+        phoneNumbers[0] = new ContactField('work', '212-555-1234', false);
+        phoneNumbers[1] = new ContactField('mobile', '917-555-5432', true); // preferred number
+        phoneNumbers[2] = new ContactField('home', '203-555-7890', false);
+        contact.phoneNumbers = phoneNumbers;
+
+        // save the contact
+        contact.save();
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+
+        function onDeviceReady() {
+            // create a new contact
+            var contact = navigator.contacts.create();
+
+            // store contact phone numbers in ContactField[]
+            var phoneNumbers = [];
+            phoneNumbers[0] = new ContactField('work', '212-555-1234', false);
+            phoneNumbers[1] = new ContactField('mobile', '917-555-5432', true); // preferred number
+            phoneNumbers[2] = new ContactField('home', '203-555-7890', false);
+            contact.phoneNumbers = phoneNumbers;
+
+            // save the contact
+            contact.save();
+
+            // search contacts, returning display name and phone numbers
+            var options = new ContactFindOptions();
+            options.filter = "";
+            filter = ["displayName", "phoneNumbers"];
+            navigator.contacts.find(filter, onSuccess, onError, options);
+        }
+
+        // onSuccess: Get a snapshot of the current contacts
+        //
+        function onSuccess(contacts) {
+            for (var i = 0; i < contacts.length; i++) {
+                // display phone numbers
+                for (var j = 0; j < contacts[i].phoneNumbers.length; j++) {
+                    alert("Type: "      + contacts[i].phoneNumbers[j].type  + "\n" +
+                          "Value: "     + contacts[i].phoneNumbers[j].value + "\n" +
+                          "Preferred: " + contacts[i].phoneNumbers[j].pref);
+                }
+            }
+        };
+
+        // onError: Failed to get the contacts
+        //
+        function onError(contactError) {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Find Contacts</p>
+      </body>
+    </html>
+
+## Android Quirks
+
+- __pref__: Not supported, returning `false`.
+
+## BlackBerry 10 Quirks
+
+- __type__: Partially supported.  Used for phone numbers.
+
+- __value__: Supported.
+
+- __pref__: Not supported, returning `false`.
+
+## iOS Quirks
+
+- __pref__: Not supported, returning `false`.
+
diff --git a/docs/en/3.3.0/cordova/contacts/ContactFindOptions/contactfindoptions.md b/docs/en/3.3.0/cordova/contacts/ContactFindOptions/contactfindoptions.md
new file mode 100644
index 0000000..1af5b89
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/ContactFindOptions/contactfindoptions.md
@@ -0,0 +1,109 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ContactFindOptions
+
+Contains properties that can be used to filter the results of a `contacts.find` operation.
+
+## Properties
+
+- __filter__: The search string used to find contacts. _(DOMString)_ (Default: `""`)
+
+- __multiple__: Determines if the find operation returns multiple contacts. _(Boolean)_ (Default: `false`)
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // success callback
+    function onSuccess(contacts) {
+        for (var i=0; i<contacts.length; i++) {
+            alert(contacts[i].displayName);
+        }
+    };
+
+    // error callback
+    function onError(contactError) {
+        alert('onError!');
+    };
+
+    // specify contact search criteria
+    var options = new ContactFindOptions();
+        options.filter="";        // empty search string returns all contacts
+        options.multiple=true;    // return multiple results
+        filter = ["displayName"]; // return contact.displayName field
+
+        // find contacts
+    navigator.contacts.find(filter, onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // specify contact search criteria
+            var options = new ContactFindOptions();
+            options.filter = "";      // empty search string returns all contacts
+            options.multiple = true;  // return multiple results
+            filter = ["displayName"]; // return contact.displayName field
+
+            // find contacts
+            navigator.contacts.find(filter, onSuccess, onError, options);
+        }
+
+        // onSuccess: Get a snapshot of the current contacts
+        //
+        function onSuccess(contacts) {
+            for (var i=0; i<contacts.length; i++) {
+                alert(contacts[i].displayName);
+            }
+        };
+
+        // onError: Failed to get the contacts
+        //
+        function onError(contactError) {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Find Contacts</p>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/contacts/ContactName/contactname.md b/docs/en/3.3.0/cordova/contacts/ContactName/contactname.md
new file mode 100644
index 0000000..168b102
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/ContactName/contactname.md
@@ -0,0 +1,144 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ContactName
+
+Contains different kinds of information about a `Contact` object's name.
+
+## Properties
+
+- __formatted__: The complete name of the contact. _(DOMString)_
+
+- __familyName__: The contact's family name. _(DOMString)_
+
+- __givenName__: The contact's given name. _(DOMString)_
+
+- __middleName__: The contact's middle name. _(DOMString)_
+
+- __honorificPrefix__: The contact's prefix (example _Mr._ or _Dr._) _(DOMString)_
+
+- __honorificSuffix__: The contact's suffix (example _Esq._). _(DOMString)_
+
+## Details
+
+The `ContactName` object stores a contact's name properties.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android 2.X
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(contacts) {
+        for (var i = 0; i < contacts.length; i++) {
+            alert("Formatted: "  + contacts[i].name.formatted       + "\n" +
+                "Family Name: "  + contacts[i].name.familyName      + "\n" +
+                "Given Name: "   + contacts[i].name.givenName       + "\n" +
+                "Middle Name: "  + contacts[i].name.middleName      + "\n" +
+                "Suffix: "       + contacts[i].name.honorificSuffix + "\n" +
+                "Prefix: "       + contacts[i].name.honorificSuffix);
+        }
+    };
+
+    function onError(contactError) {
+        alert('onError!');
+    };
+
+    var options = new ContactFindOptions();
+    options.filter = "";
+    filter = ["displayName", "name"];
+    navigator.contacts.find(filter, onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var options = new ContactFindOptions();
+            options.filter="";
+            filter = ["displayName","name"];
+            navigator.contacts.find(filter, onSuccess, onError, options);
+        }
+
+        // onSuccess: Get a snapshot of the current contacts
+        //
+        function onSuccess(contacts) {
+            for (var i = 0; i < contacts.length; i ++) {
+                alert("Formatted: " + contacts[i].name.formatted       + "\n" +
+                    "Family Name: " + contacts[i].name.familyName      + "\n" +
+                    "Given Name: "  + contacts[i].name.givenName       + "\n" +
+                    "Middle Name: " + contacts[i].name.middleName      + "\n" +
+                    "Suffix: "      + contacts[i].name.honorificSuffix + "\n" +
+                    "Prefix: "      + contacts[i].name.honorificPrefix);
+            }
+        };
+
+        // onError: Failed to get the contacts
+        //
+        function onError(contactError) {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Find Contacts</p>
+      </body>
+    </html>
+
+## Android Quirks
+
+- __formatted__: Partially supported, and read-only.  Returns a concatenation of `honorificPrefix`, `givenName`, `middleName`, `familyName`, and `honorificSuffix`.
+
+## BlackBerry 10 Quirks
+
+- __formatted__: Partially supported.  Returns a concatenation of BlackBerry __firstName__ and __lastName__ fields.
+
+- __familyName__: Supported.  Stored in BlackBerry __lastName__ field.
+
+- __givenName__: Supported.  Stored in BlackBerry __firstName__ field.
+
+- __middleName__: Not supported, returning `null`.
+
+- __honorificPrefix__: Not supported, returning `null`.
+
+- __honorificSuffix__: Not supported, returning `null`.
+
+## iOS Quirks
+
+- __formatted__: Partially supported.  Returns iOS Composite Name, but is read-only.
+
diff --git a/docs/en/3.3.0/cordova/contacts/ContactOrganization/contactorganization.md b/docs/en/3.3.0/cordova/contacts/ContactOrganization/contactorganization.md
new file mode 100644
index 0000000..4801e18
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/ContactOrganization/contactorganization.md
@@ -0,0 +1,151 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ContactOrganization
+
+Contains a `Contact` object's organization properties.
+
+## Properties
+
+- __pref__: Set to `true` if this `ContactOrganization` contains the user's preferred value. _(boolean)_
+
+- __type__: A string that indicates what type of field this is, _home_ for example. _(DOMString)
+
+- __name__: The name of the organization. _(DOMString)_
+
+- __department__: The department the contract works for. _(DOMString)_
+
+- __title__: The contact's title at the organization. _(DOMString)_
+
+## Details
+
+The `ContactOrganization` object stores a contact's organization
+properties.  A `Contact` object stores one or more
+`ContactOrganization` objects in an array.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(contacts) {
+        for (var i = 0; i < contacts.length; i++) {
+            for (var j = 0; j < contacts[i].organizations.length; j++) {
+                alert("Pref: "      + contacts[i].organizations[j].pref       + "\n" +
+                    "Type: "        + contacts[i].organizations[j].type       + "\n" +
+                    "Name: "        + contacts[i].organizations[j].name       + "\n" +
+                    "Department: "  + contacts[i].organizations[j].department + "\n" +
+                    "Title: "       + contacts[i].organizations[j].title);
+            }
+        }
+    };
+
+    function onError(contactError) {
+        alert('onError!');
+    };
+
+    var options = new ContactFindOptions();
+    options.filter = "";
+    filter = ["displayName", "organizations"];
+    navigator.contacts.find(filter, onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var options = new ContactFindOptions();
+            options.filter="";
+            filter = ["displayName","organizations"];
+            navigator.contacts.find(filter, onSuccess, onError, options);
+        }
+
+        // onSuccess: Get a snapshot of the current contacts
+        //
+        function onSuccess(contacts) {
+            for (var i = 0; i < contacts.length; i++) {
+                for (var j = 0; j < contacts[i].organizations.length; j++) {
+                    alert("Pref: "     + contacts[i].organizations[j].pref       + "\n" +
+                        "Type: "       + contacts[i].organizations[j].type       + "\n" +
+                        "Name: "       + contacts[i].organizations[j].name       + "\n" +
+                        "Department: " + contacts[i].organizations[j].department + "\n" +
+                        "Title: "      + contacts[i].organizations[j].title);
+                }
+            }
+        };
+
+        // onError: Failed to get the contacts
+        //
+        function onError(contactError) {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Find Contacts</p>
+      </body>
+    </html>
+
+## Android 2.X Quirks
+
+- __pref__: Not supported by Android 2.X devices, returning `false`.
+
+## BlackBerry 10 Quirks
+
+- __pref__: Not supported by BlackBerry devices, returning `false`.
+
+- __type__: Not supported by BlackBerry devices, returning `null`.
+
+- __name__: Partially supported.  The first organization name is stored in the BlackBerry __company__ field.
+
+- __department__: Not supported, returning `null`.
+
+- __title__: Partially supported.  The first organization title is stored in the BlackBerry __jobTitle__ field.
+
+## iOS Quirks
+
+- __pref__: Not supported on iOS devices, returning `false`.
+
+- __type__: Not supported on iOS devices, returning `null`.
+
+- __name__: Partially supported.  The first organization name is stored in the iOS __kABPersonOrganizationProperty__ field.
+
+- __department__: Partially supported.  The first department name is stored in the iOS __kABPersonDepartmentProperty__ field.
+
+- __title__: Partially supported.  The first title is stored in the iOS __kABPersonJobTitleProperty__ field.
+
diff --git a/docs/en/3.3.0/cordova/contacts/contacts.create.md b/docs/en/3.3.0/cordova/contacts/contacts.create.md
new file mode 100644
index 0000000..67d5746
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/contacts.create.md
@@ -0,0 +1,72 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# contacts.create
+
+Returns a new Contact object.
+
+    var contact = navigator.contacts.create(properties);
+
+## Description
+
+The `contacts.create` method is synchronous, and returns a new `Contact` object.
+
+This method does not retain the Contact object in the device contacts
+database, for which you need to invoke the `Contact.save` method.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    var myContact = navigator.contacts.create({"displayName": "Test User"});
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Contact Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var myContact = navigator.contacts.create({"displayName": "Test User"});
+            myContact.note = "This contact has a note.";
+            console.log("The contact, " + myContact.displayName + ", note: " + myContact.note);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Create Contact</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/contacts/contacts.find.md b/docs/en/3.3.0/cordova/contacts/contacts.find.md
new file mode 100644
index 0000000..72cbb8e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/contacts.find.md
@@ -0,0 +1,124 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# contacts.find
+
+Queries the device contacts database and returns one or more `Contact`
+objects, each containing the fields specified.
+
+    navigator.contacts.find(contactFields, contactSuccess, contactError, contactFindOptions);
+
+## Description
+
+The `contacts.find` method executes asynchronously, querying the
+device contacts database and returning an array of `Contact` objects.
+The resulting objects are passed to the `contactSuccess` callback
+function specified by the __contactSuccess__ parameter.
+
+The __contactFields__ parameter specifies the fields to be used as a
+search qualifier, and only those results are passed to the
+__contactSuccess__ callback function.  A zero-length __contactFields__
+parameter is invalid and results in
+`ContactError.INVALID_ARGUMENT_ERROR`. A __contactFields__ value of
+`"*"` returns all contact fields.
+
+The __contactFindOptions.filter__ string can be used as a search
+filter when querying the contacts database.  If provided, a
+case-insensitive, partial value match is applied to each field
+specified in the __contactFields__ parameter.  If there's a match for
+_any_ of the specified fields, the contact is returned.
+
+## Parameters
+
+- __contactFields__: Contact fields to use as a search qualifier. The resulting `Contact` object only features values for these fields. _(DOMString[])_ [Required]
+
+- __contactSuccess__: Success callback function invoked with the contacts returned from the database. [Required]
+
+- __contactError__: Error callback function, invoked when an error occurs. [Optional]
+
+- __contactFindOptions__: Search options to filter contacts. [Optional]
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function onSuccess(contacts) {
+        alert('Found ' + contacts.length + ' contacts.');
+    };
+
+    function onError(contactError) {
+        alert('onError!');
+    };
+
+    // find all contacts with 'Bob' in any name field
+    var options      = new ContactFindOptions();
+    options.filter   = "Bob";
+    options.multiple = true;
+    var fields       = ["displayName", "name"];
+    navigator.contacts.find(fields, onSuccess, onError, options);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+        <head>
+            <title>Contact Example</title>
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+                // Wait for device API libraries to load
+                document.addEventListener("deviceready", onDeviceReady, false);
+
+                // device APIs are available
+
+                function onDeviceReady() {
+                    // find all contacts with 'Bob' in any name field
+                    var options = new ContactFindOptions();
+                    options.filter = "Bob";
+                    var fields = ["displayName", "name"];
+                    navigator.contacts.find(fields, onSuccess, onError, options);
+                }
+
+                // onSuccess: Get a snapshot of the current contacts
+
+                function onSuccess(contacts) {
+                    for (var i = 0; i < contacts.length; i++) {
+                        console.log("Display Name = " + contacts[i].displayName);
+                    }
+                }
+
+                // onError: Failed to get the contacts
+
+                function onError(contactError) {
+                    alert('onError!');
+                }
+            </script>
+        </head>
+
+        <body>
+            <h1>Example</h1>
+            <p>Find Contacts</p>
+        </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/contacts/contacts.md b/docs/en/3.3.0/cordova/contacts/contacts.md
new file mode 100644
index 0000000..c2a96d9
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/contacts.md
@@ -0,0 +1,139 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Contacts
+
+> The `contacts` object provides access to the device contacts database.
+
+__WARNING__: Collection and use of contact data raises
+important privacy issues.  Your app's privacy policy should discuss
+how the app uses contact data and whether it is shared with any other
+parties.  Contact information is considered sensitive because it
+reveals the people with whom a person communicates.  Therefore, in
+addition to the app's privacy policy, you should strongly consider
+providing a just-in-time notice before the app accesses or uses
+contact data, if the device operating system doesn't do so
+already. That notice should provide the same information noted above,
+as well as obtaining the user's permission (e.g., by presenting
+choices for __OK__ and __No Thanks__).  Note that some app
+marketplaces may require the app to provide a just-in-time notice and
+obtain the user's permission before accessing contact data.  A
+clear and easy-to-understand user experience surrounding the use of
+contact data helps avoid user confusion and perceived misuse of
+contact data.  For more information, please see the Privacy Guide.
+
+## Methods
+
+- contacts.create
+- contacts.find
+
+## Arguments
+
+- contactFields
+- contactSuccess
+- contactError
+- contactFindOptions
+
+## Objects
+
+- Contact
+- ContactName
+- ContactField
+- ContactAddress
+- ContactOrganization
+- ContactFindOptions
+- ContactError
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.contacts
+        $ cordova plugin ls
+        [ 'org.apache.cordova.contacts' ]
+        $ cordova plugin rm org.apache.cordova.contacts
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Contacts">
+            <param name="android-package" value="org.apache.cordova.contacts.ContactManager" />
+        </feature>
+
+        (in app/AndroidManifest.xml)      
+        <uses-permission android:name="android.permission.READ_CONTACTS" />
+        <uses-permission android:name="android.permission.WRITE_CONTACTS" />
+        <uses-permission android:name="android.permission.GET_ACCOUNTS" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Contacts">
+            <param name="android-package" value="org.apache.cordova.contacts.ContactManager" />
+        </feature>
+
+        (in app/AndroidManifest.xml)      
+        <uses-permission android:name="android.permission.READ_CONTACTS" />
+        <uses-permission android:name="android.permission.WRITE_CONTACTS" />
+        <uses-permission android:name="android.permission.GET_ACCOUNTS" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+
+        <feature name="Contacts" value="Contacts"/>
+        <rim:permit>access_pimdomain_contacts</rim:permit>
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Contacts">
+            <param name="ios-package" value="CDVContacts" />
+        </feature>
+
+* FirefoxOS
+       
+		Enable access to the API by changing [app permissions](https://developer.mozilla.org/en-US/Apps/Developing/App_permissions)
+
+        (in platforms/firefoxos/www/manifest.webapp)
+        "type": "privileged",
+        "permissions": {
+			"contacts": {
+				"access": (choose from "readonly", "readwrite", "readcreate", or "createonly"),
+				"description": "Describe why you need access to contacts API"
+			}
+        }
+
+		All privileged apps enforce [Content Security Policy](https://developer.mozilla.org/en-US/Apps/CSP) 
+		which forbids inline scripts. Initialize your application in another way.
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_CONTACTS" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/contacts/parameters/contactError.md b/docs/en/3.3.0/cordova/contacts/parameters/contactError.md
new file mode 100644
index 0000000..11ee57d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/parameters/contactError.md
@@ -0,0 +1,26 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# contactError
+
+Error callback function for contact functions.
+
+    function(error) {
+        // Handle the error
+    }
diff --git a/docs/en/3.3.0/cordova/contacts/parameters/contactFields.md b/docs/en/3.3.0/cordova/contacts/parameters/contactFields.md
new file mode 100644
index 0000000..e2da390
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/parameters/contactFields.md
@@ -0,0 +1,24 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# contactFields
+
+Required parameter for the `contacts.find` method, used to specify which fields should be included in the `Contact` objects resulting from a find operation.
+
+    ["name", "phoneNumbers", "emails"]
diff --git a/docs/en/3.3.0/cordova/contacts/parameters/contactFindOptions.md b/docs/en/3.3.0/cordova/contacts/parameters/contactFindOptions.md
new file mode 100644
index 0000000..fb7e79c
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/parameters/contactFindOptions.md
@@ -0,0 +1,34 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# contactFindOptions
+
+Optional parameter of the `contacts.find` method, used to filter the
+contacts returned from the contacts database.
+
+    {
+      filter: "",
+      multiple: true,
+    };
+
+## Options
+
+- __filter__: The search string used to filter contacts. _(DOMString)_ (Default: `""`)
+
+- __multiple__: Determines if the find operation returns multiple contacts. _(Boolean)_ (Default: `false`)
diff --git a/docs/en/3.3.0/cordova/contacts/parameters/contactSuccess.md b/docs/en/3.3.0/cordova/contacts/parameters/contactSuccess.md
new file mode 100644
index 0000000..543f5e3
--- /dev/null
+++ b/docs/en/3.3.0/cordova/contacts/parameters/contactSuccess.md
@@ -0,0 +1,38 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# contactSuccess
+
+Success callback function that provides the `Contact` array resulting from a `contacts.find` operation.
+
+    function(contacts) {
+        // Do something
+    }
+
+## Parameters
+
+- __contacts__: The contact array resulting from a find operation. _(Contact)_
+
+## Example
+
+    function contactSuccess(contacts) {
+        for (var i=0; i<contacts.length; i++) {
+            console.log("Display Name = " + contacts[i].displayName);
+        }
+    }
diff --git a/docs/en/3.3.0/cordova/device/device.cordova.md b/docs/en/3.3.0/cordova/device/device.cordova.md
new file mode 100644
index 0000000..81f6d3f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.cordova.md
@@ -0,0 +1,75 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# device.cordova
+
+Get the version of Cordova running on the device.
+
+    var string = device.cordova;
+
+## Description
+
+`device.cordova` returns the version of Cordova running on the device.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    var name = device.cordova;
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var element = document.getElementById('deviceProperties');
+            element.innerHTML = 'Device Model: '    + device.model    + '<br />' +
+                                'Device Cordova: '  + device.cordova  + '<br />' +
+                                'Device Platform: ' + device.platform + '<br />' +
+                                'Device UUID: '     + device.uuid     + '<br />' +
+                                'Device Version: '  + device.version  + '<br />';
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="deviceProperties">Loading device properties...</p>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/device/device.md b/docs/en/3.3.0/cordova/device/device.md
new file mode 100644
index 0000000..427a251
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.md
@@ -0,0 +1,94 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Device
+
+> The `device` object describes the device's hardware and software.
+
+## Properties
+
+- device.model
+- device.cordova
+- device.platform
+- device.uuid
+- device.version
+- device.name
+
+## Variable Scope
+
+Since `device` is assigned to the `window` object, it is implicitly in the global scope.
+
+    // These reference the same `device`
+    var phoneModel = window.device.model;
+    var phoneModel = device.model;
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.device
+        $ cordova plugin ls
+        [ 'org.apache.cordova.device' ]
+        $ cordova plugin rm org.apache.cordova.device
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Device">
+            <param name="android-package" value="org.apache.cordova.device.Device" />
+        </feature>
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Device">
+            <param name="android-package" value="org.apache.cordova.device.Device" />
+        </feature>
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="Device" value="Device"/>
+        <rim:permissions>
+            <rim:permit>read_device_identifying_information</rim:permit>
+        </rim:permissions>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_WEBBROWSERCOMPONENT" />
+            <Capability Name="ID_CAP_IDENTITY_DEVICE" />
+            <Capability Name="ID_CAP_IDENTITY_USER" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+* Tizen (in `config.xml`)
+
+        <feature name="http://tizen.org/api/systeminfo" required="true"/>
+
+  Reference: [Application Manifest for Tizen Web Application](https://developer.tizen.org/help/topic/org.tizen.help.gs/Creating%20a%20Project.html?path=0_1_1_3#8814682_CreatingaProject-EditingconfigxmlFeatures)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/device/device.model.md b/docs/en/3.3.0/cordova/device/device.model.md
new file mode 100644
index 0000000..ec5d31f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.model.md
@@ -0,0 +1,92 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# device.model
+
+Get the device's model name.
+
+    var string = device.model;
+
+## Description
+
+The `device.model` returns the name of the device's model or
+product. The value is set by the device manufacturer and may be
+different across versions of the same product.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Android:    Nexus One       returns "Passion" (Nexus One code name)
+    //             Motorola Droid  returns "voles"
+    // BlackBerry: Torch 9800      returns "9800"
+    // iOS:     for the iPad Mini, returns iPad2,5; iPhone 5 is iPhone 5,1. See http://theiphonewiki.com/wiki/index.php?title=Models
+    //
+    var model = device.model;
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var element = document.getElementById('deviceProperties');
+            element.innerHTML = 'Device Model: '    + device.model    + '<br />' +
+                                'Device Cordova: '  + device.cordova  + '<br />' +
+                                'Device Platform: ' + device.platform + '<br />' +
+                                'Device UUID: '     + device.uuid     + '<br />' +
+                                'Device Version: '  + device.version  + '<br />';
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="deviceProperties">Loading device properties...</p>
+      </body>
+    </html>
+
+## Android Quirks
+
+- Gets the [product name](http://developer.android.com/reference/android/os/Build.html#PRODUCT) instead of the [model name](http://developer.android.com/reference/android/os/Build.html#MODEL), which is often the production code name. For example, the Nexus One returns `Passion`, and Motorola Droid returns `voles`.
+
+## Tizen Quirks
+
+- Returns the device model assigned by the vendor, for example, `TIZEN`
+
+## Windows Phone 7 and 8 Quirks
+
+- Returns the device model specified by the manufacturer. For example, the Samsung Focus returns `SGH-i917`.
diff --git a/docs/en/3.3.0/cordova/device/device.name.md b/docs/en/3.3.0/cordova/device/device.name.md
new file mode 100644
index 0000000..bfccd59
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.name.md
@@ -0,0 +1,95 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# device.name
+
+__WARNING__: `device.name` is deprecated as of version 2.3.0. Use `device.model` instead.
+
+Get the device's model name.
+
+    var string = device.name;
+
+## Description
+
+`device.name` returns the name of the device's model or product. This
+value is set by the device manufacturer and may be different across
+versions of the same product.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Android:    Nexus One       returns "Passion" (Nexus One code name)
+    //             Motorola Droid  returns "voles"
+    // BlackBerry: Torch 9800      returns "9800"
+    // iOS:     All devices     returns either "iPhone", "iPod Touch", "iPhone Simulator", "iPad", "iPad Simulator"
+    //
+    var name = device.name;
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var element = document.getElementById('deviceProperties');
+            element.innerHTML = 'Device Name: '     + device.name     + '<br />' +
+                                'Device Model: '    + device.model    + '<br />' +
+                                'Device Cordova: '  + device.cordova  + '<br />' +
+                                'Device Platform: ' + device.platform + '<br />' +
+                                'Device UUID: '     + device.uuid     + '<br />' +
+                                'Device Version: '  + device.version  + '<br />';
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="deviceProperties">Loading device properties...</p>
+      </body>
+    </html>
+
+## Android Quirks
+
+- Gets the [product name](http://developer.android.com/reference/android/os/Build.html#PRODUCT) instead of the [model name](http://developer.android.com/reference/android/os/Build.html#MODEL), which is often the production code name. For example, the Nexus One returns `Passion`, and Motorola Droid returns `voles`.
+
+## Windows Phone 7 and 8 Quirks
+
+- Returns the device model specified by the manufacturer. For example, the Samsung Focus returns `SGH-i917`.
+
+## Tizen Quirks
+
+- Returns the device model assigned by the vendor, for example, `TIZEN`
diff --git a/docs/en/3.3.0/cordova/device/device.platform.md b/docs/en/3.3.0/cordova/device/device.platform.md
new file mode 100644
index 0000000..52b50a5
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.platform.md
@@ -0,0 +1,83 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# device.platform
+
+Get the device's operating system name.
+
+    var string = device.platform;
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Depending on the device, a few examples are:
+    //   - "Android"
+    //   - "BlackBerry 10"
+    //   - "iOS"
+    //   - "WinCE"
+    //   - "Tizen"
+    var devicePlatform = device.platform;
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var element = document.getElementById('deviceProperties');
+            element.innerHTML = 'Device Model: '    + device.model    + '<br />' +
+                                'Device Cordova: '  + device.cordova  + '<br />' +
+                                'Device Platform: ' + device.platform + '<br />' +
+                                'Device UUID: '     + device.uuid     + '<br />' +
+                                'Device Version: '  + device.version  + '<br />';
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="deviceProperties">Loading device properties...</p>
+      </body>
+    </html>
+
+## Windows Phone 7 Quirks
+
+Windows Phone 7 devices report the platform as `WinCE`.
+
+## Windows Phone 8 Quirks
+
+Windows Phone 8 devices report the platform as `Win32NT`.
diff --git a/docs/en/3.3.0/cordova/device/device.uuid.md b/docs/en/3.3.0/cordova/device/device.uuid.md
new file mode 100644
index 0000000..a8b2336
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.uuid.md
@@ -0,0 +1,103 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# device.uuid
+
+Get the device's Universally Unique Identifier ([UUID](http://en.wikipedia.org/wiki/Universally_Unique_Identifier)).
+
+    var string = device.uuid;
+
+## Description
+
+The details of how a UUID is generated are determined by the device manufacturer and are specific to the device's platform or model.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Android: Returns a random 64-bit integer (as a string, again!)
+    //          The integer is generated on the device's first boot
+    //
+    // BlackBerry: Returns the PIN number of the device
+    //             This is a nine-digit unique integer (as a string, though!)
+    //
+    // iPhone: (Paraphrased from the UIDevice Class documentation)
+    //         Returns a string of hash values created from multiple hardware identifies.
+    //         It is guaranteed to be unique for every device and can't be tied
+    //         to the user account.
+    // Windows Phone 7 : Returns a hash of device+current user,
+    // if the user is not defined, a guid is generated and will persist until the app is uninstalled
+    // Tizen: returns the device IMEI (International Mobile Equipment Identity or IMEI is a number
+    // unique to every GSM and UMTS mobile phone.
+    var deviceID = device.uuid;
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var element = document.getElementById('deviceProperties');
+            element.innerHTML = 'Device Model: '    + device.model    + '<br />' +
+                                'Device Cordova: '  + device.cordova  + '<br />' +
+                                'Device Platform: ' + device.platform + '<br />' +
+                                'Device UUID: '     + device.uuid     + '<br />' +
+                                'Device Version: '  + device.version  + '<br />';
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="deviceProperties">Loading device properties...</p>
+      </body>
+    </html>
+
+## iOS Quirk
+
+The `uuid` on iOS is not unique to a device, but varies for each
+application, for each installation.  It changes if you delete and
+re-install the app, and possibly also when you upgrade iOS, or even
+upgrade the app per version (apparent in iOS 5.1). The `uuid` is not
+a reliable value.
+
+## Windows Phone 7 and 8 Quirks
+
+The `uuid` for Windows Phone 7 requires the permission
+`ID_CAP_IDENTITY_DEVICE`.  Microsoft will likely deprecate this
+property soon.  If the capability is not available, the application
+generates a persistent guid that is maintained for the duration of the
+application's installation on the device.
diff --git a/docs/en/3.3.0/cordova/device/device.version.md b/docs/en/3.3.0/cordova/device/device.version.md
new file mode 100644
index 0000000..a3631d5
--- /dev/null
+++ b/docs/en/3.3.0/cordova/device/device.version.md
@@ -0,0 +1,79 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# device.version
+
+Get the operating system version.
+
+    var string = device.version;
+
+## Supported Platforms
+
+- Android 2.1+
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Android:    Froyo OS would return "2.2"
+    //             Eclair OS would return "2.1", "2.0.1", or "2.0"
+    //             Version can also return update level "2.1-update1"
+    //
+    // BlackBerry: Torch 9800 using OS 6.0 would return "6.0.0.600"
+    //
+    // iPhone:     iOS 3.2 returns "3.2"
+    //
+    // Windows Phone 7: returns current OS version number, ex. on Mango returns 7.10.7720
+    // Tizen: returns "TIZEN_20120425_2"
+    var deviceVersion = device.version;
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            var element = document.getElementById('deviceProperties');
+            element.innerHTML = 'Device Model: '    + device.model    + '<br />' +
+                                'Device Cordova: '  + device.cordova  + '<br />' +
+                                'Device Platform: ' + device.platform + '<br />' +
+                                'Device UUID: '     + device.uuid     + '<br />' +
+                                'Device Version: '  + device.version  + '<br />';
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="deviceProperties">Loading device properties...</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.backbutton.md b/docs/en/3.3.0/cordova/events/events.backbutton.md
new file mode 100644
index 0000000..c40d00a
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.backbutton.md
@@ -0,0 +1,81 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# backbutton
+
+The event fires when the user presses the back button.
+
+    document.addEventListener("backbutton", yourCallbackFunction, false);
+
+## Details
+
+To override the default back-button behavior, register an event
+listener for the `backbutton` event, typically by calling
+`document.addEventListener` once you receive the `deviceready` event.
+It is no longer necessary to call any other method to override the
+back-button behavior.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    document.addEventListener("backbutton", onBackKeyDown, false);
+
+    function onBackKeyDown() {
+        // Handle the back button
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Back Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("backbutton", onBackKeyDown, false);
+        }
+
+        // Handle the back button
+        //
+        function onBackKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.batterycritical.md b/docs/en/3.3.0/cordova/events/events.batterycritical.md
new file mode 100644
index 0000000..b077748
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.batterycritical.md
@@ -0,0 +1,91 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# batterycritical
+
+The event fires when the battery has reached the critical level
+threshold.
+
+    window.addEventListener("batterycritical", yourCallbackFunction, false);
+
+## Details
+
+The event fires when the percentage of battery charge has reached the
+critical battery threshold. The value is device-specific.
+
+The `batterycritical` handler is passed an object that contains two
+properties:
+
+- __level__: The percentage of battery charge (0-100). _(Number)_
+
+- __isPlugged__: A boolean that indicates whether the device is plugged in. _(Boolean)_
+
+Applications typically should use `window.addEventListener` to attach
+an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- iOS
+- Android
+- BlackBerry 10
+- Tizen
+
+## Quick Example
+
+    window.addEventListener("batterycritical", onBatteryCritical, false);
+
+    function onBatteryCritical(info) {
+        // Handle the battery critical event
+        alert("Battery Level Critical " + info.level + "%\nRecharge Soon!");
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Battery Critical Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.addEventListener("batterycritical", onBatteryCritical, false);
+        }
+
+        // Handle the batterycritical event
+        //
+        function onBatteryCritical(info) {
+            alert("Battery Level Critical " + info.level + "%\nRecharge Soon!");
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.batterylow.md b/docs/en/3.3.0/cordova/events/events.batterylow.md
new file mode 100644
index 0000000..760000e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.batterylow.md
@@ -0,0 +1,90 @@
+---
+ license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# batterylow
+
+The event fires when the battery has reached the low level threshold.
+
+    window.addEventListener("batterylow", yourCallbackFunction, false);
+
+## Details
+
+The event fires when the percentage of battery charge has reached the
+low battery threshold, device-specific value.
+
+The `batterylow` handler is passed an object that contains two
+properties:
+
+- __level__: The percentage of battery charge (0-100). _(Number)_
+
+- __isPlugged__: A boolean that indicates whether the device is plugged in. _(Boolean)_
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- iOS
+- Android
+- BlackBerry 10
+- Tizen
+
+## Quick Example
+
+    window.addEventListener("batterylow", onBatteryLow, false);
+
+    function onBatteryLow(info) {
+        // Handle the battery low event
+        alert("Battery Level Low " + info.level + "%");
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Ready Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.addEventListener("batterylow", onBatteryLow, false);
+        }
+
+        // Handle the batterylow event
+        //
+        function onBatteryLow(info) {
+            alert("Battery Level Low " + info.level + "%");
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.batterystatus.md b/docs/en/3.3.0/cordova/events/events.batterystatus.md
new file mode 100644
index 0000000..e3ac02f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.batterystatus.md
@@ -0,0 +1,97 @@
+---
+  license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# batterystatus
+
+The event fires when there is a change in the battery status.
+
+    window.addEventListener("batterystatus", yourCallbackFunction, false);
+
+## Details
+
+This event fires when the percentage of battery charge changes by at
+least 1 percent, or if the device is plugged in or unplugged.
+
+The battery status handler is passed an object that contains two
+properties:
+
+- __level__: The percentage of battery charge (0-100). _(Number)_
+
+- __isPlugged__: A boolean that indicates whether the device is plugged in. _(Boolean)_
+
+Applications typically should use `window.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- iOS
+- Android
+- BlackBerry 10
+- Windows Phone 7 and 8
+- Tizen
+
+## Windows Phone 7 and 8 Quirks
+
+Windows Phone 7 does not provide native APIs to determine battery
+level, so the `level` property is unavailable.  The `isPlugged`
+parameter _is_ supported.
+
+## Quick Example
+
+    window.addEventListener("batterystatus", onBatteryStatus, false);
+
+    function onBatteryStatus(info) {
+        // Handle the online event
+        console.log("Level: " + info.level + " isPlugged: " + info.isPlugged);
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Ready Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.addEventListener("batterystatus", onBatteryStatus, false);
+        }
+
+        // Handle the batterystatus event
+        //
+        function onBatteryStatus(info) {
+            console.log("Level: " + info.level + " isPlugged: " + info.isPlugged);
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.deviceready.md b/docs/en/3.3.0/cordova/events/events.deviceready.md
new file mode 100644
index 0000000..47537b0
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.deviceready.md
@@ -0,0 +1,90 @@
+---
+  license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# deviceready
+
+The event fires when Cordova is fully loaded.
+
+    document.addEventListener("deviceready", yourCallbackFunction, false);
+
+## Details
+
+This event is essential to any application. It signals that Cordova's
+device APIs have loaded and are ready to access.
+
+Cordova consists of two code bases: native and JavaScript. While the
+native code loads, a custom loading image displays. However,
+JavaScript only loads once the DOM loads. This means the web app may
+potentially call a Cordova JavaScript function before the
+corresponding native code becomes available.
+
+The `deviceready` event fires once Cordova has fully loaded. Once the
+event fires, you can safely make calls to Cordova APIs.  Applications
+typically attach an event listener with `document.addEventListener`
+once the HTML document's DOM has loaded.
+
+The `deviceready` event behaves somewhat differently from others.  Any
+event handler registered after the `deviceready` event fires has its
+callback function called immediately.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    document.addEventListener("deviceready", onDeviceReady, false);
+
+    function onDeviceReady() {
+        // Now safe to use device APIs
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Ready Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Now safe to use device APIs
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.endcallbutton.md b/docs/en/3.3.0/cordova/events/events.endcallbutton.md
new file mode 100644
index 0000000..8b3e21d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.endcallbutton.md
@@ -0,0 +1,78 @@
+---
+  license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# endcallbutton
+
+This event fires when the user presses the end call button.
+
+    document.addEventListener("endcallbutton", yourCallbackFunction, false);
+
+## Details
+
+The event overrides the default end call behavior.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- BlackBerry 10
+
+## Quick Example
+
+    document.addEventListener("endcallbutton", onEndCallKeyDown, false);
+
+    function onEndCallKeyDown() {
+        // Handle the end call button
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                          "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+      <head>
+        <title>End Call Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("endcallbutton", onEndCallKeyDown, false);
+        }
+
+        // Handle the end call button
+        //
+        function onEndCallKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.md b/docs/en/3.3.0/cordova/events/events.md
new file mode 100644
index 0000000..91a1648
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.md
@@ -0,0 +1,97 @@
+---
+  license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Events
+
+> Cordova lifecycle events.
+
+## Event Types
+
+- deviceready
+- pause
+- resume
+- online
+- offline
+- backbutton
+- batterycritical
+- batterylow
+- batterystatus
+- menubutton
+- searchbutton
+- startcallbutton
+- endcallbutton
+- volumedownbutton
+- volumeupbutton
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements battery status and other
+device-level APIs as _plugins_. Access to all other events not related
+to battery status are enabled by default.  Use the CLI's `plugin`
+command, described in The Command-Line Interface, to enable or disable
+battery events:
+
+        $ cordova plugin add org.apache.cordova.battery-status
+        $ cordova plugin ls
+        [ 'org.apache.cordova.battery-status' ]
+        $ cordova plugin rm org.apache.cordova.battery-status
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Battery">
+            <param name="android-package" value="org.apache.cordova.batterystatus.BatteryListener" />
+        </feature>
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Battery">
+            <param name="android-package" value="org.apache.cordova.batterystatus.BatteryListener" />
+        </feature>
+
+* BlackBerry 10
+
+        (in www/plugins.xml)
+        <feature name="Battery">
+            <param name="blackberry-package" value="org.apache.cordova.battery.Battery" />
+        </feature>
+
+        (in www/config.xml)
+        <feature id="blackberry.app"          required="true" version="1.0.0.0" />
+        <feature id="blackberry.app.event"    required="true" version="1.0.0.0" />
+        <feature id="blackberry.system.event" required="true" version="1.0.0.0" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Battery">
+            <param name="ios-package" value="CDVBattery" />
+        </feature>
+
+* Tizen (in `config.xml`)
+
+        <feature name="http://tizen.org/api/systeminfo" required="true"/>
+
+  Reference: [Application Manifest for Tizen Web Application](https://developer.tizen.org/help/topic/org.tizen.help.gs/Creating%20a%20Project.html?path=0_1_1_3#8814682_CreatingaProject-EditingconfigxmlFeatures)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/events/events.menubutton.md b/docs/en/3.3.0/cordova/events/events.menubutton.md
new file mode 100644
index 0000000..2d3006a
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.menubutton.md
@@ -0,0 +1,80 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# menubutton
+
+The event fires when the user presses the menu button.
+
+    document.addEventListener("menubutton", yourCallbackFunction, false);
+
+## Details
+
+Applying an event handler overrides the default menu button behavior.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+
+## Quick Example
+
+    document.addEventListener("menubutton", onMenuKeyDown, false);
+
+    function onMenuKeyDown() {
+        // Handle the back button
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                          "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+      <head>
+        <title>Menu Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("menubutton", onMenuKeyDown, false);
+        }
+
+        // Handle the menu button
+        //
+        function onMenuKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.offline.md b/docs/en/3.3.0/cordova/events/events.offline.md
new file mode 100644
index 0000000..5ea6fbf
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.offline.md
@@ -0,0 +1,99 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# offline
+
+The event fires when an application goes offline, and the device is
+not connected to the Internet.
+
+    document.addEventListener("offline", yourCallbackFunction, false);
+
+## Details
+
+The `offline` event fires when a previously connected device loses a
+network connection so that an application can no longer access the
+Internet.  It relies on the same information as the Connection API,
+and fires when the `connection.type` changes from `NONE` to any other
+value.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    document.addEventListener("offline", onOffline, false);
+
+    function onOffline() {
+        // Handle the offline event
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Offline Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            document.addEventListener("offline", onOffline, false);
+        }
+
+        // Handle the offline event
+        //
+        function onOffline() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
+
+## iOS Quirks
+
+During initial startup, the first offline event (if applicable) takes at least a second to fire.
+
+## Windows Phone 7 Quirks
+
+When running in the Emulator, the `connection.status` is always unknown, so this event does _not_ fire.
+
+## Windows Phone 8 Quirks
+
+The Emulator reports the connection type as `Cellular`, which does not change, so the event does _not_ fire.
diff --git a/docs/en/3.3.0/cordova/events/events.online.md b/docs/en/3.3.0/cordova/events/events.online.md
new file mode 100644
index 0000000..5f6a8db
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.online.md
@@ -0,0 +1,100 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# online
+
+This event fires when an application goes online, and the device
+becomes connected to the Internet.
+
+    document.addEventListener("online", yourCallbackFunction, false);
+
+## Details
+
+The `online` event fires when a previously unconnected device receives
+a network connection to allow an application access to the Internet.
+It relies on the same information as the Connection API, and fires
+when the value of `connection.type` becomes `NONE`.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    document.addEventListener("online", onOnline, false);
+
+    function onOnline() {
+        // Handle the online event
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Online Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("online", onOnline, false);
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+        }
+
+        // Handle the online event
+        //
+        function onOnline() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
+
+## iOS Quirks
+
+During initial startup, the first `online` event (if applicable) takes
+at least a second to fire, prior to which `connection.type` is
+`UNKNOWN`.
+
+## Windows Phone 7 Quirks
+
+When running in the Emulator, the `connection.status` is always unknown, so this event does _not_ fire.
+
+## Windows Phone 8 Quirks
+
+The Emulator reports the connection type as `Cellular`, which does not change, so events does _not_ fire.
diff --git a/docs/en/3.3.0/cordova/events/events.pause.md b/docs/en/3.3.0/cordova/events/events.pause.md
new file mode 100644
index 0000000..dc6f4f0
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.pause.md
@@ -0,0 +1,101 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# pause
+
+The event fires when an application is put into the background.
+
+    document.addEventListener("pause", yourCallbackFunction, false);
+
+## Details
+
+The `pause` event fires when the native platform puts the application
+into the background, typically when the user switches to a different
+application.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    document.addEventListener("pause", onPause, false);
+
+    function onPause() {
+        // Handle the pause event
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Pause Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            document.addEventListener("pause", onPause, false);
+        }
+
+        // Handle the pause event
+        //
+        function onPause() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
+
+## iOS Quirks
+
+In the `pause` handler, any calls to the Cordova API or to native
+plugins that go through Objective-C do not work, along with any
+interactive calls, such as alerts or `console.log()`. They are only
+processed when the app resumes, on the next run loop.
+
+The iOS-specific `resign` event is available as an alternative to
+`pause`, and detects when users enable the __Lock__ button to lock the
+device with the app running in the foreground.  If the app (and
+device) is enabled for multi-tasking, this is paired with a subsequent
+`pause` event, but only under iOS 5. In effect, all locked apps in iOS
+5 that have multi-tasking enabled are pushed to the background.  For
+apps to remain running when locked under iOS 5, disable the app's
+multi-tasking by setting
+[UIApplicationExitsOnSuspend](http://developer.apple.com/library/ios/#documentation/general/Reference/InfoPlistKeyReference/Articles/iPhoneOSKeys.html)
+to `YES`. To run when locked on iOS 4, this setting does not matter.
diff --git a/docs/en/3.3.0/cordova/events/events.resume.md b/docs/en/3.3.0/cordova/events/events.resume.md
new file mode 100644
index 0000000..4e38a7d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.resume.md
@@ -0,0 +1,114 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# resume
+
+The event fires when an application is retrieved from the background.
+
+    document.addEventListener("resume", yourCallbackFunction, false);
+
+## Details
+
+The `resume` event fires when the native platform pulls the
+application out from the background.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    document.addEventListener("resume", onResume, false);
+
+    function onResume() {
+        // Handle the resume event
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Resume Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            document.addEventListener("resume", onResume, false);
+        }
+
+        // Handle the resume event
+        //
+        function onResume() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
+
+## iOS Quirks
+
+Any interactive functions called from a `pause` event handler execute
+later when the app resumes, as signaled by the `resume` event. These
+include alerts, `console.log()`, and any calls from plugins or the
+Cordova API, which go through Objective-C.
+
+- __active__ event
+
+    The iOS-specific `active` event is available as an alternative to
+`resume`, and detects when users disable the __Lock__ button to unlock
+the device with the app running in the foreground.  If the app (and
+device) is enabled for multi-tasking, this is paired with a subsequent
+`resume` event, but only under iOS 5. In effect, all locked apps in
+iOS 5 that have multi-tasking enabled are pushed to the background.
+For apps to remain running when locked under iOS 5, disable the app's
+multi-tasking by setting [UIApplicationExitsOnSuspend](http://developer.apple.com/library/ios/#documentation/general/Reference/InfoPlistKeyReference/Articles/iPhoneOSKeys.html)
+to `YES`. To run when locked on iOS 4, this setting does not matter.
+    
+- __resume__ event
+
+    When called from a `resume` event handler, interactive functions such
+as `alert()` need to be wrapped in a `setTimeout()` call with a
+timeout value of zero, or else the app hangs. For example:
+
+        document.addEventListener("resume", onResume, false);
+        function onResume() {
+           setTimeout(function() {
+                  // TODO: do your thing!
+                }, 0);
+        }
diff --git a/docs/en/3.3.0/cordova/events/events.searchbutton.md b/docs/en/3.3.0/cordova/events/events.searchbutton.md
new file mode 100644
index 0000000..bdde91e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.searchbutton.md
@@ -0,0 +1,79 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# searchbutton
+
+The event fires when the user presses the search button on Android.
+
+    document.addEventListener("searchbutton", yourCallbackFunction, false);
+
+## Details
+
+If you need to override the default search button behavior on Android
+you can register an event listener for the 'searchbutton' event.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- Android
+
+## Quick Example
+
+    document.addEventListener("searchbutton", onSearchKeyDown, false);
+
+    function onSearchKeyDown() {
+        // Handle the search button
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                          "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+      <head>
+        <title>Search Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("searchbutton", onSearchKeyDown, false);
+        }
+
+        // Handle the search button
+        //
+        function onSearchKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.startcallbutton.md b/docs/en/3.3.0/cordova/events/events.startcallbutton.md
new file mode 100644
index 0000000..ec6f61f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.startcallbutton.md
@@ -0,0 +1,79 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# startcallbutton
+
+The event fires when the user presses the start call button.
+
+    document.addEventListener("startcallbutton", yourCallbackFunction, false);
+
+## Details
+
+If you need to override the default start call behavior you can
+register an event listener for the `startcallbutton` event.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- BlackBerry 10
+
+## Quick Example
+
+    document.addEventListener("startcallbutton", onStartCallKeyDown, false);
+
+    function onStartCallKeyDown() {
+        // Handle the start call button
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                          "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+      <head>
+        <title>Start Call Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("startcallbutton", onStartCallKeyDown, false);
+        }
+
+        // Handle the start call button
+        //
+        function onStartCallKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.volumedownbutton.md b/docs/en/3.3.0/cordova/events/events.volumedownbutton.md
new file mode 100644
index 0000000..fd3ff6c
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.volumedownbutton.md
@@ -0,0 +1,79 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# volumedownbutton
+
+The event fires when the user presses the volume down button.
+
+    document.addEventListener("volumedownbutton", yourCallbackFunction, false);
+
+## Details
+
+If you need to override the default volume down behavior you can
+register an event listener for the `volumedownbutton` event.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- BlackBerry 10
+
+## Quick Example
+
+    document.addEventListener("volumedownbutton", onVolumeDownKeyDown, false);
+
+    function onVolumeDownKeyDown() {
+        // Handle the volume down button
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                          "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+      <head>
+        <title>Volume Down Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("volumedownbutton", onVolumeDownKeyDown, false);
+        }
+
+        // Handle the volume down button
+        //
+        function onVolumeDownKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/events/events.volumeupbutton.md b/docs/en/3.3.0/cordova/events/events.volumeupbutton.md
new file mode 100644
index 0000000..a17e63b
--- /dev/null
+++ b/docs/en/3.3.0/cordova/events/events.volumeupbutton.md
@@ -0,0 +1,79 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# volumeupbutton
+
+The event fires when the user presses the volume up button.
+
+    document.addEventListener("volumeupbutton", yourCallbackFunction, false);
+
+## Details
+
+If you need to override the default volume up behavior you can
+register an event listener for the `volumeupbutton` event.
+
+Applications typically should use `document.addEventListener` to
+attach an event listener once the `deviceready` event fires.
+
+## Supported Platforms
+
+- BlackBerry 10
+
+## Quick Example
+
+    document.addEventListener("volumeupbutton", onVolumeUpKeyDown, false);
+
+    function onVolumeUpKeyDown() {
+        // Handle the volume up button
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                          "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+      <head>
+        <title>Volume Up Button Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        function onLoad() {
+            document.addEventListener("deviceready", onDeviceReady, false);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Register the event listener
+            document.addEventListener("volumeupbutton", onVolumeUpKeyDown, false);
+        }
+
+        // Handle the volume up button
+        //
+        function onVolumeUpKeyDown() {
+        }
+
+        </script>
+      </head>
+      <body onload="onLoad()">
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/file/directoryentry/directoryentry.md b/docs/en/3.3.0/cordova/file/directoryentry/directoryentry.md
new file mode 100644
index 0000000..24187b2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/directoryentry/directoryentry.md
@@ -0,0 +1,411 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# DirectoryEntry
+
+This object represents a directory on a file system, as defined by the
+[W3C Directories and Systems](http://www.w3.org/TR/file-system-api/)
+specification.
+
+## Properties
+
+- __isFile__: Always `false`. _(boolean)_
+
+- __isDirectory__: Always `true`. _(boolean)_
+
+- __name__: The name of the `DirectoryEntry`, excluding the path leading to it. _(DOMString)_
+
+- __fullPath__: The full absolute path from the root to the `DirectoryEntry`. _(DOMString)_
+
+__NOTE__: The following attribute is defined by the W3C specification,
+but is _not_ supported:
+
+- __filesystem__: The file system on which the `DirectoryEntry` resides. _(FileSystem)_
+
+## Methods
+
+The following methods can be invoked on a `DirectoryEntry` object:
+
+- __getMetadata__: Look up metadata about a directory.
+
+- __setMetadata__: Set metadata on a directory.
+
+- __moveTo__: Move a directory to a different location on the file system.
+
+- __copyTo__: Copy a directory to a different location on the file system.
+
+- __toURL__: Return a URL to help locate a directory.
+
+- __remove__: Delete a directory. The directory must be empty.
+
+- __getParent__: Look up the parent directory.
+
+- __createReader__: Create a new `DirectoryReader` that can read entries from a directory.
+
+- __getDirectory__: Create or look up a directory.
+
+- __getFile__: Create or look up a file.
+
+- __removeRecursively__: Delete a directory and all of its contents.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## getMetadata
+
+Look up metadata about a directory.
+
+__Parameters__:
+
+- __successCallback__: A callback function to execute with a `Metadata` object. _(Function)_
+
+- __errorCallback__: A callback function to execute if an error occurs when retrieving the `Metadata`. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(metadata) {
+        console.log("Last Modified: " + metadata.modificationTime);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    // Request the metadata object for this entry
+    entry.getMetadata(success, fail);
+
+## setMetadata
+
+Sets a directory's extended attributes, or metadata. _Currently works
+only on iOS._
+
+__Parameters__:
+
+- __successCallback__: A callback that executes when the metadata is successfully set. _(Function)_
+
+- __errorCallback__: A callback that executes when the metadata fails to be set. _(Function)_
+
+- __metadataObject__: An object that contains the metadata's keys and values. _(Object)_
+
+__Quick Example__
+
+    function success() {
+        console.log("The metadata was successfully set.");
+    }
+
+    function fail() {
+        alert("There was an error in setting the metadata");
+    }
+
+    // Set the metadata
+    entry.setMetadata(success, fail, { "com.apple.MobileBackup": 1});
+
+__iOS Quirk__
+
+- Only the `com.apple.MobileBackup` extended attribute is supported. Set the value to `1` to prevent the directory from being backed up to iCloud. Set the value to `0` to re-enable the directory to be backed up to iCloud.
+
+__Quick Example__
+
+    function setFolderMetadata(localFileSystem, subFolder, metadataKey, metadataValue)
+    {
+        var onSetMetadataWin = function() {
+            console.log("success setting metadata")
+        }
+        var onSetMetadataFail = function() {
+            console.log("error setting metadata")
+        }
+
+        var onGetDirectoryWin = function(parent) {
+            var data = {};
+            data[metadataKey] = metadataValue;
+            parent.setMetadata(onSetMetadataWin, onSetMetadataFail, data);
+        }
+        var onGetDirectoryFail = function() {
+            console.log("error getting dir")
+        }
+
+        var onFSWin = function(fileSystem) {
+            fileSystem.root.getDirectory(subFolder, {create: true, exclusive: false}, onGetDirectoryWin, onGetDirectoryFail);
+        }
+
+        var onFSFail = function(error) {
+            console.log(error.code);
+        }
+
+        window.requestFileSystem(localFileSystem, 0, onFSWin, onFSFail);
+    }
+
+        setFolderMetadata(LocalFileSystem.PERSISTENT, "Backups", "com.apple.MobileBackup", 1);
+
+## moveTo
+
+Move a directory to a different location on the file system. An error results if the app attempts to:
+
+- move a directory inside itself or to any child at any depth.
+
+- move a directory into its parent if a name different from its current directory is not provided.
+
+- move a directory to a path occupied by a file.
+
+- move a directory to a path occupied by a directory that is not empty.
+
+Moving a directory on top of an existing empty directory attempts to
+delete and replace that directory.
+
+__Parameters__:
+
+- __parent__: The parent directory to which to move the directory. _(DirectoryEntry)_
+
+- __newName__: The new name of the directory. Defaults to the current name if unspecified. _(DOMString)_
+
+- __successCallback__: A callback that executes with the `DirectoryEntry` object for the new directory. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to move the directory. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(entry) {
+        console.log("New Path: " + entry.fullPath);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    function moveDir(entry) {
+        var parent = document.getElementById('parent').value,
+            parentName = parent.substring(parent.lastIndexOf('/')+1),
+            newName = document.getElementById('newName').value,
+            parentEntry = new DirectoryEntry(parentName, parent);
+
+        // move the directory to a new directory and rename it
+        entry.moveTo(parentEntry, newName, success, fail);
+    }
+
+## copyTo
+
+Copy a directory to a different location on the file system.  An error results if the app attempts to:
+
+- copy a directory inside itself at any depth.
+
+- copy a directory into its parent if a name different from its current directory is not provided.
+
+Directory copies are always recursive, and copy all contents of the directory.
+
+__Parameters__:
+
+- __parent__: The parent directory to which to copy the directory. _(DirectoryEntry)_
+
+- __newName__: The new name of the directory. Defaults to the current name if unspecified. _(DOMString)_
+
+- __successCallback__: A callback that executes with the `DirectoryEntry` object for the new directory. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to copy the underlying directory. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function win(entry) {
+        console.log("New Path: " + entry.fullPath);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    function copyDir(entry) {
+        var parent = document.getElementById('parent').value,
+            parentName = parent.substring(parent.lastIndexOf('/')+1),
+            newName = document.getElementById('newName').value,
+            parentEntry = new DirectoryEntry(parentName, parent);
+
+        // copy the directory to a new directory and rename it
+        entry.copyTo(parentEntry, newName, success, fail);
+    }
+
+## toURL
+
+Returns a URL that can be used to locate the directory.
+
+__Quick Example__
+
+    // Get the URL for this directory
+    var dirURL = entry.toURL();
+    console.log(dirURL);
+
+## remove
+
+Deletes a directory. An error results if the app attempts to:
+
+- delete a directory that is not empty.
+
+- delete the root directory of a filesystem.
+
+__Parameters__:
+
+- __successCallback__: A callback that executes after the directory is deleted.  Invoked with no parameters. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to delete the directory. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(entry) {
+        console.log("Removal succeeded");
+    }
+
+    function fail(error) {
+        alert('Error removing directory: ' + error.code);
+    }
+
+    // remove this directory
+    entry.remove(success, fail);
+
+## getParent
+
+Look up the parent `DirectoryEntry` containing the directory.
+
+__Parameters__:
+
+- __successCallback__: A callback that is passed the directory's parent `DirectoryEntry`. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to retrieve the parent `DirectoryEntry`. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(parent) {
+        console.log("Parent Name: " + parent.name);
+    }
+
+    function fail(error) {
+        alert('Failed to get parent directory: ' + error.code);
+    }
+
+    // Get the parent DirectoryEntry
+    entry.getParent(success, fail);
+
+## createReader
+
+Creates a new DirectoryReader to read entries in a directory.
+
+__Quick Example__
+
+    // create a directory reader
+    var directoryReader = entry.createReader();
+
+## getDirectory
+
+Creates or looks up an existing directory.  An error results if the app attempts to:
+
+- create a directory whose immediate parent does not yet exist.
+
+__Parameters__:
+
+- __path__: The path to the directory to be looked up or created.  Either an absolute path, or a relative path from this `DirectoryEntry`. _(DOMString)_
+
+- __options__: Options to specify whether the directory is to be created if it doesn't exist.  _(Flags)_
+
+- __successCallback__: A callback that executes with a `DirectoryEntry` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when creating or looking up the directory. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(dirEntry) {
+        console.log("Directory Name: " + dirEntry.name);
+    }
+
+    function fail(error) {
+        alert("Unable to create new directory: " + error.code);
+    }
+
+    // Retrieve an existing directory, or create it if it does not already exist
+    entry.getDirectory("newDir", {create: true, exclusive: false}, success, fail);
+
+## getFile
+
+Creates or looks up a file.  An error results if the app attempts to:
+
+- create a file whose immediate parent does not yet exist.
+
+__Parameters__:
+
+- __path__: The path to the file to be looked up or created.  Either an absolute path, or a relative path from this `DirectoryEntry`. _(DOMString)_
+
+- __options__: Options to specify whether the file is created if it doesn't exist.  _(Flags)_
+
+- __successCallback__: A callback that is passed a `FileEntry` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when creating or looking up the file. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(fileEntry) {
+        console.log("File Name: " + fileEntry.name);
+    }
+
+    function fail(error) {
+        alert("Failed to retrieve file: " + error.code);
+    }
+
+    // Retrieve an existing file, or create it if it does not exist
+    entry.getFile("newFile.txt", {create: true, exclusive: false}, success, fail);
+
+## removeRecursively
+
+Deletes a directory and all of its contents.  In the event of an error (such as trying to delete
+a directory containing a file that can't be removed), some of the contents of the directory may
+be deleted.   An error results if the app attempts to:
+
+- delete the root directory of a filesystem.
+
+__Parameters__:
+
+- __successCallback__: A callback that executes after the `DirectoryEntry` has been deleted.  Invoked with no parameters. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to delete the `DirectoryEntry`. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(parent) {
+        console.log("Remove Recursively Succeeded");
+    }
+
+    function fail(error) {
+        alert("Failed to remove directory or it's contents: " + error.code);
+    }
+
+    // remove the directory and all it's contents
+    entry.removeRecursively(success, fail);
+
+## BlackBerry Quirks
+
+May fail with a `ControlledAccessException` in the following cases:
+
+- An app attempts to access a directory created by a previous installation of the app.
+
+> Solution: ensure temporary directories are cleaned manually, or by the application prior to reinstallation.
+
+- If the device is connected by USB.
+
+> Solution: disconnect the USB cable from the device and run again.
diff --git a/docs/en/3.3.0/cordova/file/directoryreader/directoryreader.md b/docs/en/3.3.0/cordova/file/directoryreader/directoryreader.md
new file mode 100644
index 0000000..06ae3d2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/directoryreader/directoryreader.md
@@ -0,0 +1,67 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# DirectoryReader
+
+An object that lists files and directories within a directory, as
+defined in the
+[W3C Directories and Systems](http://www.w3.org/TR/file-system-api/)
+specification.
+
+## Methods
+
+- __readEntries__: Read the entries in a directory.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## readEntries
+
+Read the entries in this directory.
+
+__Parameters__:
+
+- __successCallback__: A callback that is passed an array of `FileEntry` and `DirectoryEntry` objects. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when retrieving the directory listing. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(entries) {
+        var i;
+        for (i=0; i<entries.length; i++) {
+            console.log(entries[i].name);
+        }
+    }
+
+    function fail(error) {
+        alert("Failed to list directory contents: " + error.code);
+    }
+
+    // Get a directory reader
+    var directoryReader = dirEntry.createReader();
+
+    // Get a list of all the entries in the directory
+    directoryReader.readEntries(success,fail);
diff --git a/docs/en/3.3.0/cordova/file/file.md b/docs/en/3.3.0/cordova/file/file.md
new file mode 100644
index 0000000..d23306d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/file.md
@@ -0,0 +1,121 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# File
+
+> An API to read, write and navigate file system hierarchies, based on the [w3c file api](http://www.w3.org/TR/FileAPI).
+
+## Objects
+
+- DirectoryEntry
+- DirectoryReader
+- File
+- FileEntry
+- FileError
+- FileReader
+- FileSystem
+- FileTransfer
+- FileTransferError
+- FileUploadOptions
+- FileUploadResult
+- FileWriter
+- Flags
+- LocalFileSystem
+- Metadata
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.file
+        $ cordova plugin ls
+        [ 'org.apache.cordova.file' ]
+        $ cordova plugin rm org.apache.cordova.file
+        
+You must add the `file-transfer` plugin separately. The CLI
+automatically adds the `file` plugin as a dependency, so there is no
+need to add it separately:
+
+        $ cordova plugin add org.apache.cordova.file-transfer
+        $ cordova plugin ls
+        [ 'org.apache.cordova.file',
+          'org.apache.cordova.file-transfer' ]
+        $ cordova plugin rm org.apache.cordova.file-transfer
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (after adding just the file plugin)
+        (in app/res/xml/config.xml)
+        <feature name="File">
+            <param name="android-package" value="org.apache.cordova.file.FileUtils" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+        (after adding just the file-transfer plugin)
+        (in app/res/xml/config.xml)
+        <feature name="FileTransfer">
+            <param name="android-package" value="org.apache.cordova.filetransfer.FileTransfer" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+* Android
+
+        (after adding just the file plugin)
+        (in app/res/xml/config.xml)
+        <feature name="File">
+            <param name="android-package" value="org.apache.cordova.file.FileUtils" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+        (after adding just the file-transfer plugin)
+        (in app/res/xml/config.xml)
+        <feature name="FileTransfer">
+            <param name="android-package" value="org.apache.cordova.filetransfer.FileTransfer" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="File" value="File" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="File">
+            <param name="ios-package" value="CDVFile" />
+        </feature>
+        <feature name="FileTransfer">
+            <param name="ios-package" value="CDVFileTransfer" />
+        </feature>
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/file/fileentry/fileentry.md b/docs/en/3.3.0/cordova/file/fileentry/fileentry.md
new file mode 100644
index 0000000..f53a833
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/fileentry/fileentry.md
@@ -0,0 +1,337 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileEntry
+
+Represents a file on a file system, as defined in the
+[W3C Directories and Systems](http://www.w3.org/TR/file-system-api/)
+specification.
+
+## Properties
+
+- __isFile__: Always `true`. _(boolean)_
+
+- __isDirectory__: Always `false`. _(boolean)_
+
+- __name__: The name of the `FileEntry`, excluding the path leading to it. _(DOMString)_
+
+- __fullPath__: The full absolute path from the root to the `FileEntry`. _(DOMString)_
+
+__NOTE__: The following attribute is defined by the W3C specification,
+but is _not_ supported:
+
+- __filesystem__: The file system on which the `FileEntry` resides. _(FileSystem)_
+
+## Methods
+
+- __getMetadata__: Look up metadata about a file.
+
+- __setMetadata__: Set metadata on a file.
+
+- __moveTo__: Move a file to a different location on the file system.
+
+- __copyTo__: Copy a file to a different location on the file system.
+
+- __toURL__: Return a URL that can be used to locate a file.
+
+- __remove__: Delete a file.
+
+- __getParent__: Look up the parent directory.
+
+- __createWriter__: Creates a `FileWriter` object that can be used to write to a file.
+
+- __file__: Creates a `File` object containing file properties.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## getMetadata
+
+Look up metadata about a file.
+
+__Parameters__:
+
+- __successCallback__: A callback that is passed a `Metadata` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when retrieving the `Metadata`. Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(metadata) {
+        console.log("Last Modified: " + metadata.modificationTime);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    // Request the metadata object for this entry
+    entry.getMetadata(success, fail);
+
+## setMetadata
+
+Set metadata on a file.
+
+__Currently works only on iOS.__
+
+- This sets the extended attributes of a file.
+
+__Parameters__:
+
+- __successCallback__: A callback that executes when the metadata is set. _(Function)_
+
+- __errorCallback__: A callback that executes when the metadata is not successfully set. _(Function)_
+
+- __metadataObject__: An object that contains the metadata's keys and values. _(Object)_
+
+__Quick Example__
+
+    function success() {
+        console.log("The metadata was successfully set.");
+    }
+
+    function fail() {
+        alert("There was an error in setting the metadata");
+    }
+
+    // Set the metadata
+    entry.setMetadata(success, fail, { "com.apple.MobileBackup": 1});
+
+__iOS Quirk__
+
+- Only the `com.apple.MobileBackup` extended attribute is supported. Set the value to `1` to prevent the file from being backed up to iCloud. Set the value to `0` to re-enable the file to be backed up to iCloud.
+
+__Quick Example__
+
+    function setFileMetadata(localFileSystem, filePath, metadataKey, metadataValue)
+    {
+        var onSetMetadataWin = function() {
+            console.log("success setting metadata")
+        }
+        var onSetMetadataFail = function() {
+            console.log("error setting metadata")
+        }
+
+        var onGetFileWin = function(parent) {
+            var data = {};
+            data[metadataKey] = metadataValue;
+            parent.setMetadata(onSetMetadataWin, onSetMetadataFail, data);
+        }
+        var onGetFileFail = function() {
+            console.log("error getting file")
+        }
+
+        var onFSWin = function(fileSystem) {
+            fileSystem.root.getFile(filePath, {create: true, exclusive: false}, onGetFileWin, onGetFileFail);
+        }
+
+        var onFSFail = function(error) {
+            console.log(error.code);
+        }
+
+        window.requestFileSystem(localFileSystem, 0, onFSWin, onFSFail);
+    }
+
+        setFileMetadata(LocalFileSystem.PERSISTENT, "Backups/sqlite.db", "com.apple.MobileBackup", 1);
+
+## moveTo
+
+Move a file to a different location on the file system. An error
+results if the app attempts to:
+
+- move a file into its parent if a name different from its current one isn't provided;
+
+- move a file to a path occupied by a directory;
+
+In addition, moving a file on top of an existing file attempts to
+delete and replace that file.
+
+__Parameters__:
+
+- __parent__: The parent directory to which to move the file. _(DirectoryEntry)_
+
+- __newName__: The new name of the file. Defaults to the current name if unspecified. _(DOMString)_
+
+- __successCallback__: A callback that is passed the new file's `FileEntry` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to move the file.  Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(entry) {
+        console.log("New Path: " + entry.fullPath);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    function moveFile(entry) {
+        var parent = document.getElementById('parent').value,
+            parentName = parent.substring(parent.lastIndexOf('/')+1),
+            parentEntry = new DirectoryEntry(parentName, parent);
+
+        // move the file to a new directory and rename it
+        entry.moveTo(parentEntry, "newFile.txt", success, fail);
+    }
+
+## copyTo
+
+Copy a file to a new location on the file system.  An error results if
+the app attempts to:
+
+- copy a file into its parent if a name different from its current one is not provided.
+
+__Parameters__:
+
+- __parent__: The parent directory to which to copy the file. _(DirectoryEntry)_
+
+- __newName__: The new name of the file. Defaults to the current name if unspecified. _(DOMString)_
+
+- __successCallback__: A callback that is passed the new file's `FileEntry` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to copy the file.  Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function win(entry) {
+        console.log("New Path: " + entry.fullPath);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    function copyFile(entry) {
+        var parent = document.getElementById('parent').value,
+            parentName = parent.substring(parent.lastIndexOf('/')+1),
+            parentEntry = new DirectoryEntry(parentName, parent);
+
+        // copy the file to a new directory and rename it
+        entry.copyTo(parentEntry, "file.copy", success, fail);
+    }
+
+## toURL
+
+Returns a URL that can be used to locate the file.
+
+__Quick Example__
+
+    // Request the URL for this entry
+    var fileURL = entry.toURL();
+    console.log(fileURL);
+
+## remove
+
+Deletes a file.
+
+__Parameters__:
+
+- __successCallback__: A callback that executes after the file has been deleted.  Invoked with no parameters. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to delete the file.  Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(entry) {
+        console.log("Removal succeeded");
+    }
+
+    function fail(error) {
+        alert('Error removing file: ' + error.code);
+    }
+
+    // remove the file
+    entry.remove(success, fail);
+
+## getParent
+
+Look up the parent `DirectoryEntry` containing the file.
+
+__Parameters__:
+
+- __successCallback__: A callback that is passed the file's parent `DirectoryEntry`. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when attempting to retrieve the parent `DirectoryEntry`.  Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(parent) {
+        console.log("Parent Name: " + parent.name);
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    // Get the parent DirectoryEntry
+    entry.getParent(success, fail);
+
+## createWriter
+
+Create a `FileWriter` object associated with the file represented by the `FileEntry`.
+
+__Parameters__:
+
+- __successCallback__: A callback that is passed a `FileWriter` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs while attempting to create the FileWriter.  Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(writer) {
+        writer.write("Some text to the file");
+    }
+
+    function fail(error) {
+        alert(error.code);
+    }
+
+    // create a FileWriter to write to the file
+    entry.createWriter(success, fail);
+
+## file
+
+Return a `File` object that represents the current state of the file
+that this `FileEntry` represents.
+
+__Parameters__:
+
+- __successCallback__: A callback that is passed a `File` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when creating the `File` object, such as when the file no longer exists.  Invoked with a `FileError` object. _(Function)_
+
+__Quick Example__
+
+    function success(file) {
+        console.log("File size: " + file.size);
+    }
+
+    function fail(error) {
+        alert("Unable to retrieve file properties: " + error.code);
+    }
+
+    // obtain properties of a file
+    entry.file(success, fail);
diff --git a/docs/en/3.3.0/cordova/file/fileerror/fileerror.md b/docs/en/3.3.0/cordova/file/fileerror/fileerror.md
new file mode 100644
index 0000000..47add3f
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/fileerror/fileerror.md
@@ -0,0 +1,47 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileError
+
+A `FileError` object is set when an error occurs in any of the File API methods.
+
+## Properties
+
+- __code__: One of the predefined error codes listed below.
+
+## Constants
+
+- `FileError.NOT_FOUND_ERR`
+- `FileError.SECURITY_ERR`
+- `FileError.ABORT_ERR`
+- `FileError.NOT_READABLE_ERR`
+- `FileError.ENCODING_ERR`
+- `FileError.NO_MODIFICATION_ALLOWED_ERR`
+- `FileError.INVALID_STATE_ERR`
+- `FileError.SYNTAX_ERR`
+- `FileError.INVALID_MODIFICATION_ERR`
+- `FileError.QUOTA_EXCEEDED_ERR`
+- `FileError.TYPE_MISMATCH_ERR`
+- `FileError.PATH_EXISTS_ERR`
+
+## Description
+
+The `FileError` object is the only parameter provided to any of the
+File API's error callbacks.  To determine the type of error, compare
+its `code` property to any of the listings above.
diff --git a/docs/en/3.3.0/cordova/file/fileobj/fileobj.md b/docs/en/3.3.0/cordova/file/fileobj/fileobj.md
new file mode 100644
index 0000000..125e990
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/fileobj/fileobj.md
@@ -0,0 +1,83 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# File
+
+This object contains attributes of a single file.
+
+## Properties
+
+- __name__: The name of the file. _(DOMString)_
+
+- __fullPath__: The full path of the file including the file name. _(DOMString)_
+
+- __type__: The mime type of the file. _(DOMString)_
+
+- __lastModifiedDate__: The last time the file was modified. _(Date)_
+
+- __size__: The size of the file in bytes. _(long)_
+
+## Methods
+
+- __slice__: Select only a portion of the file to be read.
+
+## Details
+
+The `File` object contains attributes of a single file.  You can get
+an instance of a `File` object by calling a `FileEntry` object's
+`file()` method.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## slice
+
+Return a new `File` object, for which `FileReader` returns only the
+specified portion of the file.  Negative values for `start` or `end`
+are measured from the end of the file.  Indexes are positioned
+relative to the current slice. (See the full example below.)
+
+__Parameters__:
+
+- __start__: The index of the first byte to read, inclusive.
+
+- __end__: The index of the byte after the last one to read.
+
+__Quick Example__
+
+    var slicedFile = file.slice(10, 30);
+
+__Full Example__
+
+    var slice1 = file.slice(100, 400);
+    var slice2 = slice1.slice(20, 35);
+
+    var slice3 = file.slice(120, 135);
+    // slice2 and slice3 are equivalent.
+
+__Supported Platforms__
+
+- Android
+- iOS
diff --git a/docs/en/3.3.0/cordova/file/filereader/filereader.md b/docs/en/3.3.0/cordova/file/filereader/filereader.md
new file mode 100644
index 0000000..2461916
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/filereader/filereader.md
@@ -0,0 +1,255 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileReader
+
+The `FileReader` allows basic access to a file.
+
+## Properties
+
+- __readyState__: One of the reader's three possible states, either `EMPTY`, `LOADING` or `DONE`.
+
+- __result__: The contents of the file that have been read. _(DOMString)_
+
+- __error__: An object containing errors. _(FileError)_
+
+- __onloadstart__: Called when the read starts. _(Function)_
+
+- __onload__: Called when the read has successfully completed. _(Function)_
+
+- __onabort__: Called when the read has been aborted. For instance, by invoking the `abort()` method. _(Function)_
+
+- __onerror__: Called when the read has failed. _(Function)_
+
+- __onloadend__: Called when the request has completed (either in success or failure).  _(Function)_
+
+__NOTE__: The following porperty is not supported:
+
+- __onprogress__: Called while reading the file, reporting progress in terms of `progress.loaded`/`progress.total`. _(Function)_
+
+## Methods
+
+- __abort__: Aborts reading file.
+
+- __readAsDataURL__: Read file and return data as a base64-encoded data URL.
+
+- __readAsText__: Reads text file.
+
+- __readAsBinaryString__: Reads file as binary and returns a binary string.
+
+- __readAsArrayBuffer__: Reads file as an `ArrayBuffer`.
+
+## Details
+
+The `FileReader` object offers a way to read files from the device's
+file system.  Files can be read as text or as a base64 data-encoded
+string.  Event listeners receive the `loadstart`, `progress`, `load`,
+`loadend`, `error`, and `abort` events.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## readAsDataURL
+
+__Parameters__:
+
+- __file__: the file object to read.
+
+## Quick Example
+
+    function win(file) {
+        var reader = new FileReader();
+        reader.onloadend = function (evt) {
+            console.log("read success");
+            console.log(evt.target.result);
+        };
+        reader.readAsDataURL(file);
+    };
+
+    var fail = function (error) {
+        console.log(error.code);
+    };
+
+    entry.file(win, fail);
+
+## readAsText
+
+__Parameters__:
+
+- __file__: the file object to read.
+
+- __encoding__: the encoding to use to encode the file's content. Default is UTF8.
+
+## Quick Example
+
+    function win(file) {
+        var reader = new FileReader();
+        reader.onloadend = function (evt) {
+            console.log("read success");
+            console.log(evt.target.result);
+        };
+        reader.readAsText(file);
+    };
+
+    var fail = function (error) {
+        console.log(error.code);
+    };
+
+    entry.file(win, fail);
+
+## abort 
+
+    function win(file) {
+        var reader = new FileReader();
+        reader.onloadend = function(evt) {
+            console.log("read success");
+            console.log(evt.target.result);
+        };
+        reader.readAsText(file);
+        reader.abort();
+    };
+
+    function fail(error) {
+        console.log(error.code);
+    }
+
+    entry.file(win, fail);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>FileReader Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, gotFS, fail);
+        }
+
+        function gotFS(fileSystem) {
+            fileSystem.root.getFile("readme.txt", null, gotFileEntry, fail);
+        }
+
+        function gotFileEntry(fileEntry) {
+            fileEntry.file(gotFile, fail);
+        }
+
+        function gotFile(file){
+            readDataUrl(file);
+            readAsText(file);
+        }
+
+        function readDataUrl(file) {
+            var reader = new FileReader();
+            reader.onloadend = function(evt) {
+                console.log("Read as data URL");
+                console.log(evt.target.result);
+            };
+            reader.readAsDataURL(file);
+        }
+
+        function readAsText(file) {
+            var reader = new FileReader();
+            reader.onloadend = function(evt) {
+                console.log("Read as text");
+                console.log(evt.target.result);
+            };
+            reader.readAsText(file);
+        }
+
+        function fail(error) {
+            console.log(error.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Read File</p>
+      </body>
+    </html>
+
+## iOS Quirks
+
+- The __encoding__ parameter is not supported, and UTF8 encoding is always in effect.
+
+## readAsBinaryString
+
+Currently supported on iOS and Android only.
+
+__Parameters__:
+
+- __file__: the file object to read.
+
+## Quick Example
+
+    function win(file) {
+        var reader = new FileReader();
+        reader.onloadend = function (evt) {
+            console.log("read success");
+            console.log(evt.target.result);
+        };
+        reader.readAsBinaryString(file);
+    };
+
+    var fail = function (error) {
+        console.log(error.code);
+    };
+
+    entry.file(win, fail);
+
+## readAsArrayBuffer
+
+Currently supported on iOS and Android only.
+
+__Parameters__:
+
+- __file__:  the file object to read.
+
+## Quick Example
+
+    function win(file) {
+        var reader = new FileReader();
+        reader.onloadend = function (evt) {
+            console.log("read success");
+            console.log(new Uint8Array(evt.target.result));
+        };
+        reader.readAsArrayBuffer(file);
+    };
+
+    var fail = function (error) {
+        console.log(error.code);
+    };
+
+    entry.file(win, fail);
diff --git a/docs/en/3.3.0/cordova/file/filesystem/filesystem.md b/docs/en/3.3.0/cordova/file/filesystem/filesystem.md
new file mode 100644
index 0000000..3df4213
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/filesystem/filesystem.md
@@ -0,0 +1,91 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileSystem
+
+This object represents a file system.
+
+## Properties
+
+- __name__: The name of the file system. _(DOMString)_
+
+- __root__: The root directory of the file system. _(DirectoryEntry)_
+
+## Details
+
+The `FileSystem` object represents information about the file system.
+The name of the file system is unique across the list of exposed
+file systems.  The root property contains a `DirectoryEntry` object
+that represents the file system's root directory.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## File System Quick Example
+
+    function onSuccess(fileSystem) {
+        console.log(fileSystem.name);
+        console.log(fileSystem.root.name);
+    }
+
+    // request the persistent file system
+    window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, onSuccess, null);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>File System Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, onFileSystemSuccess, fail);
+        }
+
+        function onFileSystemSuccess(fileSystem) {
+            console.log(fileSystem.name);
+            console.log(fileSystem.root.name);
+        }
+
+        function fail(error) {
+            console.log(error.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>File System</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/file/filetransfer/filetransfer.md b/docs/en/3.3.0/cordova/file/filetransfer/filetransfer.md
new file mode 100644
index 0000000..2627cba
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/filetransfer/filetransfer.md
@@ -0,0 +1,302 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileTransfer
+
+The `FileTransfer` object allows you to upload or download files to
+and from a server.
+
+## Properties
+
+- __onprogress__: Called with a `ProgressEvent` whenever a new chunk of data is transferred. _(Function)_
+
+## Methods
+
+- __upload__: sends a file to a server.
+
+- __download__: downloads a file from server.
+
+- __abort__: Aborts an in-progress transfer.
+
+## Details
+
+The `FileTransfer` object provides a way to upload files to a remote
+server using an HTTP multi-part POST request.  Both HTTP and HTTPS
+protocols are supported.  Optional parameters can be specified by
+passing a `FileUploadOptions` object to the `upload()` method.  On
+successful upload, a `FileUploadResult` object is passed to the
+success callback.  If an error occurs, a `FileTransferError` object is
+passed to the error callback.  It is also possible (only on iOS and
+Android) to download a file from a remote server and save it on the
+device.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## upload
+
+__Parameters__:
+
+- __filePath__: Full path of the file on the device.
+
+- __server__: URL of the server to receive the file, as encoded by `encodeURI()`.
+
+- __successCallback__: A callback that is passed a `Metadata` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs retrieving the `Metadata`. Invoked with a `FileTransferError` object. _(Function)_
+
+- __options__: Optional parameters such as file name and mimetype.
+
+- __trustAllHosts__: Optional parameter, defaults to `false`. If set to `true`, it accepts all security certificates. This is useful since Android rejects self-signed security certificates. Not recommended for production use. Supported on Android and iOS. _(boolean)_
+
+__Quick Example__
+
+    // !! Assumes variable fileURI contains a valid URI to a text file on the device
+
+    var win = function (r) {
+        console.log("Code = " + r.responseCode);
+        console.log("Response = " + r.response);
+        console.log("Sent = " + r.bytesSent);
+    }
+
+    var fail = function (error) {
+        alert("An error has occurred: Code = " + error.code);
+        console.log("upload error source " + error.source);
+        console.log("upload error target " + error.target);
+    }
+
+    var options = new FileUploadOptions();
+    options.fileKey = "file";
+    options.fileName = fileURI.substr(fileURI.lastIndexOf('/') + 1);
+    options.mimeType = "text/plain";
+
+    var params = {};
+    params.value1 = "test";
+    params.value2 = "param";
+
+    options.params = params;
+
+    var ft = new FileTransfer();
+    ft.upload(fileURI, encodeURI("http://some.server.com/upload.php"), win, fail, options);
+
+__Full Example__
+
+    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+    <html>
+    <head>
+        <title>File Transfer Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                // Retrieve image file location from specified source
+                navigator.camera.getPicture(
+                    uploadPhoto,
+                    function(message) { alert('get picture failed'); },
+                    {
+                        quality         : 50,
+                        destinationType : navigator.camera.DestinationType.FILE_URI,
+                        sourceType      : navigator.camera.PictureSourceType.PHOTOLIBRARY
+                    }
+                );
+            }
+
+            function uploadPhoto(imageURI) {
+                var options = new FileUploadOptions();
+                options.fileKey="file";
+                options.fileName=imageURI.substr(imageURI.lastIndexOf('/')+1);
+                options.mimeType="image/jpeg";
+
+                var params = {};
+                params.value1 = "test";
+                params.value2 = "param";
+
+                options.params = params;
+
+                var ft = new FileTransfer();
+                ft.upload(imageURI, encodeURI("http://some.server.com/upload.php"), win, fail, options);
+            }
+
+            function win(r) {
+                console.log("Code = " + r.responseCode);
+                console.log("Response = " + r.response);
+                console.log("Sent = " + r.bytesSent);
+            }
+
+            function fail(error) {
+                alert("An error has occurred: Code = " + error.code);
+                console.log("upload error source " + error.source);
+                console.log("upload error target " + error.target);
+            }
+
+            </script>
+    </head>
+    <body>
+        <h1>Example</h1>
+        <p>Upload File</p>
+    </body>
+    </html>
+
+__Setting Upload Headers__
+
+Supported on Android and iOS
+
+    function win(r) {
+        console.log("Code = " + r.responseCode);
+        console.log("Response = " + r.response);
+        console.log("Sent = " + r.bytesSent);
+    }
+
+    function fail(error) {
+        alert("An error has occurred: Code = " + error.code);
+        console.log("upload error source " + error.source);
+        console.log("upload error target " + error.target);
+    }
+
+    var uri = encodeURI("http://some.server.com/upload.php");
+
+    var options = new FileUploadOptions();
+    options.fileKey="file";
+    options.fileName=fileURI.substr(fileURI.lastIndexOf('/')+1);
+    options.mimeType="text/plain";
+
+    var headers={'headerParam':'headerValue'};
+
+    options.headers = headers;
+
+    var ft = new FileTransfer();
+    ft.upload(fileURI, uri, win, fail, options);
+
+__Android Quirks__
+
+Set the `chunkedMode` option to `false` to prevent problems uploading
+to a Nginx server.
+
+## download
+
+__Parameters__:
+
+- __source__: URL of the server to download the file, as encoded by `encodeURI()`.
+
+- __target__: Full path of the file on the device.
+
+- __successCallback__: A callback that is passed  a `FileEntry` object. _(Function)_
+
+- __errorCallback__: A callback that executes if an error occurs when retrieving the `Metadata`. Invoked with a `FileTransferError` object. _(Function)_
+
+- __trustAllHosts__: Optional parameter, defaults to `false`. If set to `true`, it accepts all security certificates. This is useful because Android rejects self-signed security certificates. Not recommended for production use. Supported on Android and iOS. _(boolean)_
+
+- __options__: Optional parameters, currently only supports headers (such as Authorization (Basic Authentication), etc).
+
+__Quick Example__
+
+    // !! Assumes filePath is a valid path on the device
+
+    var fileTransfer = new FileTransfer();
+    var uri = encodeURI("http://some.server.com/download.php");
+
+    fileTransfer.download(
+        uri,
+        filePath,
+        function(entry) {
+            console.log("download complete: " + entry.fullPath);
+        },
+        function(error) {
+            console.log("download error source " + error.source);
+            console.log("download error target " + error.target);
+            console.log("upload error code" + error.code);
+        },
+        false,
+        {
+            headers: {
+                "Authorization": "Basic dGVzdHVzZXJuYW1lOnRlc3RwYXNzd29yZA=="
+            }
+        }
+    );
+
+## abort
+
+Aborts an in-progress transfer. The onerror callback is passed a FileTransferError object which has an error code of FileTransferError.ABORT_ERR.
+
+__Supported Platforms__
+
+- Amazon Fire OS
+- Android
+- iOS
+
+__Quick Example__
+
+    // !! Assumes variable fileURI contains a valid URI to a text file on the device
+
+    var win = function(r) {
+        console.log("Should not be called.");
+    }
+
+    var fail = function(error) {
+        // error.code == FileTransferError.ABORT_ERR
+        alert("An error has occurred: Code = " + error.code);
+        console.log("upload error source " + error.source);
+        console.log("upload error target " + error.target);
+    }
+
+    var options = new FileUploadOptions();
+    options.fileKey="file";
+    options.fileName="myphoto.jpg";
+    options.mimeType="image/jpeg";
+
+    var ft = new FileTransfer();
+    ft.upload(fileURI, encodeURI("http://some.server.com/upload.php"), win, fail, options);
+    ft.abort();
+
+## onprogress
+
+Called with a ProgressEvent whenever a new chunk of data is transferred.
+
+__Supported Platforms__
+
+- Amazon Fire OS
+- Android
+- iOS
+
+__Example__
+
+    fileTransfer.onprogress = function(progressEvent) {
+        if (progressEvent.lengthComputable) {
+          loadingStatus.setPercentage(progressEvent.loaded / progressEvent.total);
+        } else {
+          loadingStatus.increment();
+        }
+    };
+    fileTransfer.download(...); // or fileTransfer.upload(...);
+
+__Quirks__
+- On both Android an iOS, lengthComputable is `false` for downloads that use gzip encoding.
diff --git a/docs/en/3.3.0/cordova/file/filetransfererror/filetransfererror.md b/docs/en/3.3.0/cordova/file/filetransfererror/filetransfererror.md
new file mode 100644
index 0000000..d9ac430
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/filetransfererror/filetransfererror.md
@@ -0,0 +1,44 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileTransferError
+
+A `FileTransferError` object is passed to an error callback when an error occurs.
+
+## Properties
+
+- __code__: One of the predefined error codes listed below. (Number)
+
+- __source__: URI to the source. (String)
+
+- __target__: URI to the target. (String)
+
+- __http_status__: HTTP status code.  This attribute is only available when a response code is received from the HTTP connection. (Number)
+
+## Constants
+
+- `FileTransferError.FILE_NOT_FOUND_ERR`
+- `FileTransferError.INVALID_URL_ERR`
+- `FileTransferError.CONNECTION_ERR`
+- `FileTransferError.ABORT_ERR`
+
+## Description
+
+The `FileTransferError` object is passed to the error callback when an
+error occurs when uploading or downloading a file.
diff --git a/docs/en/3.3.0/cordova/file/fileuploadoptions/fileuploadoptions.md b/docs/en/3.3.0/cordova/file/fileuploadoptions/fileuploadoptions.md
new file mode 100644
index 0000000..5137154
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/fileuploadoptions/fileuploadoptions.md
@@ -0,0 +1,48 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileUploadOptions
+
+A `FileUploadOptions` object can be passed to the `FileTransfer`
+object's `upload()` method to specify additional parameters to the
+upload script.
+
+## Properties
+
+- __fileKey__: The name of the form element.  Defaults to `file`. (DOMString)
+
+- __fileName__: The file name to use when saving the file on the server.  Defaults to `image.jpg`. (DOMString)
+
+- __mimeType__: The mime type of the data to upload.  Defaults to `image/jpeg`. (DOMString)
+
+- __params__: A set of optional key/value pairs to pass in the HTTP request. (Object)
+
+- __chunkedMode__: Whether to upload the data in chunked streaming mode. Defaults to `true`. (Boolean)
+
+- __headers__: A map of header name/header values. Use an array to specify more than one value. (Object)
+
+## Description
+
+A `FileUploadOptions` object can be passed to the `FileTransfer`
+object's `upload()` method to specify additional parameters to the
+upload script.
+
+## WP7 Quirk
+
+- __chunkedMode__: Ignored on WP7.
diff --git a/docs/en/3.3.0/cordova/file/fileuploadresult/fileuploadresult.md b/docs/en/3.3.0/cordova/file/fileuploadresult/fileuploadresult.md
new file mode 100644
index 0000000..0972856
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/fileuploadresult/fileuploadresult.md
@@ -0,0 +1,40 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileUploadResult
+
+A `FileUploadResult` object is passed to the success callback of the
+`FileTransfer` object's `upload()` method.
+
+## Properties
+
+- __bytesSent__: The number of bytes sent to the server as part of the upload. (long)
+
+- __responseCode__: The HTTP response code returned by the server. (long)
+
+- __response__: The HTTP response returned by the server. (DOMString)
+
+## Description
+
+The `FileUploadResult` object is returned via the success callback of
+the `FileTransfer` object's `upload()` method.
+
+## iOS Quirks
+
+- Does not support `responseCode` or `bytesSent`.
diff --git a/docs/en/3.3.0/cordova/file/filewriter/filewriter.md b/docs/en/3.3.0/cordova/file/filewriter/filewriter.md
new file mode 100644
index 0000000..91591ae
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/filewriter/filewriter.md
@@ -0,0 +1,235 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# FileWriter
+
+As object that allows you to create and write data to a file.
+
+## Properties
+
+- __readyState__: One of the three possible states, either `INIT`, `WRITING`, or `DONE`.
+
+- __fileName__: The name of the file to be written. _(DOMString)_
+
+- __length__: The length of the file to be written. _(long)_
+
+- __position__: The current position of the file pointer. _(long)_
+
+- __error__: An object containing errors. _(FileError)_
+
+- __onwritestart__: Called when the write starts. _(Function)_
+
+- __onwrite__: Called when the request has completed successfully.  _(Function)_
+
+- __onabort__: Called when the write has been aborted. For instance, by invoking the abort() method. _(Function)_
+
+- __onerror__: Called when the write has failed. _(Function)_
+
+- __onwriteend__: Called when the request has completed (either in success or failure).  _(Function)_
+
+The following property is _not_ supported:
+
+- __onprogress__: Called while writing the file, reporting progress in terms of `progress.loaded`/`progress.total`. _(Function)_
+## Methods
+
+- __abort__: Aborts writing the file.
+
+- __seek__: Moves the file pointer to the specified byte.
+
+- __truncate__: Shortens the file to the specified length.
+
+- __write__: Writes data to the file.
+
+## Details
+
+The `FileWriter` object offers a way to write UTF-8 encoded files to
+the device file system.  Applications respond to `writestart`,
+`progress`, `write`, `writeend`, `error`, and `abort` events.
+
+Each `FileWriter` corresponds to a single file, to which data can be
+written many times.  The `FileWriter` maintains the file's `position`
+and `length` attributes, which allow the app to `seek` and `write`
+anywhere in the file. By default, the `FileWriter` writes to the
+beginning of the file, overwriting existing data. Set the optional
+`append` boolean to `true` in the `FileWriter`'s constructor to
+write to the end of the file.
+
+Text data is supported by all platforms listed below. Text is encoded as UTF-8 before being written to the filesystem. Some platforms also support binary data, which can be passed in as either an ArrayBuffer or a Blob.
+
+## Supported Platforms
+
+Text and Binary Support:
+
+- Amazon Fire OS
+- Android
+- iOS
+
+Text-only Support:
+
+- BlackBerry 10
+- Windows Phone 7 and 8
+- Windows 8
+
+## Seek Quick Example
+
+    function win(writer) {
+        // fast forwards file pointer to end of file
+        writer.seek(writer.length);
+    };
+
+    var fail = function(evt) {
+        console.log(error.code);
+    };
+
+    entry.createWriter(win, fail);
+
+## Truncate Quick Example
+
+    function win(writer) {
+        writer.truncate(10);
+    };
+
+    var fail = function(evt) {
+        console.log(error.code);
+    };
+
+    entry.createWriter(win, fail);
+
+## Write Quick Example
+
+    function win(writer) {
+        writer.onwrite = function(evt) {
+            console.log("write success");
+        };
+        writer.write("some sample text");
+    };
+
+    var fail = function(evt) {
+        console.log(error.code);
+    };
+
+    entry.createWriter(win, fail);
+
+## Binary Write Quick Example
+
+    function win(writer) {
+        var data = new ArrayBuffer(5),
+            dataView = new Int8Array(data);
+        for (i=0; i < 5; i++) {
+            dataView[i] = i;
+        }
+        writer.onwrite = function(evt) {
+            console.log("write success");
+        };
+        writer.write(data);
+    };
+
+    var fail = function(evt) {
+        console.log(error.code);
+    };
+
+    entry.createWriter(win, fail);
+
+## Append Quick Example
+
+    function win(writer) {
+        writer.onwrite = function(evt) {
+        console.log("write success");
+    };
+    writer.seek(writer.length);
+        writer.write("appended text");
+    };
+
+    var fail = function(evt) {
+        console.log(error.code);
+    };
+
+    entry.createWriter(win, fail);
+
+## Abort Quick Example
+
+    function win(writer) {
+        writer.onwrite = function(evt) {
+            console.log("write success");
+        };
+        writer.write("some sample text");
+        writer.abort();
+    };
+
+    var fail = function(evt) {
+        console.log(error.code);
+    };
+
+    entry.createWriter(win, fail);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>FileWriter Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, gotFS, fail);
+        }
+
+        function gotFS(fileSystem) {
+            fileSystem.root.getFile("readme.txt", {create: true, exclusive: false}, gotFileEntry, fail);
+        }
+
+        function gotFileEntry(fileEntry) {
+            fileEntry.createWriter(gotFileWriter, fail);
+        }
+
+        function gotFileWriter(writer) {
+            writer.onwriteend = function(evt) {
+                console.log("contents of file now 'some sample text'");
+                writer.truncate(11);
+                writer.onwriteend = function(evt) {
+                    console.log("contents of file now 'some sample'");
+                    writer.seek(4);
+                    writer.write(" different text");
+                    writer.onwriteend = function(evt){
+                        console.log("contents of file now 'some different text'");
+                    }
+                };
+            };
+            writer.write("some sample text");
+        }
+
+        function fail(error) {
+            console.log(error.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Write File</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/file/flags/flags.md b/docs/en/3.3.0/cordova/file/flags/flags.md
new file mode 100644
index 0000000..4f95890
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/flags/flags.md
@@ -0,0 +1,47 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Flags
+
+Supplies arguments to the `DirectoryEntry` object's `getFile()` and
+`getDirectory()` methods, which look up or create files and
+directories, respectively.
+
+## Properties
+
+- __create__: Indicates that the file or directory should be created if it does not already exist. _(boolean)_
+
+- __exclusive__: Has has no effect by itself, but when used with `create` causes the file or directory creation to fail if the target path already exists. _(boolean)_
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Get the data directory, creating it if it doesn't exist.
+    dataDir = fileSystem.root.getDirectory("data", {create: true});
+
+    // Create the lock file, if and only if it doesn't exist.
+    lockFile = dataDir.getFile("lockfile.txt", {create: true, exclusive: true});
diff --git a/docs/en/3.3.0/cordova/file/localfilesystem/localfilesystem.md b/docs/en/3.3.0/cordova/file/localfilesystem/localfilesystem.md
new file mode 100644
index 0000000..0ee84c0
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/localfilesystem/localfilesystem.md
@@ -0,0 +1,126 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# LocalFileSystem
+
+This object provides a way to obtain root file systems.
+
+## Methods
+
+- __requestFileSystem__: Requests a filesystem. _(Function)_
+
+- __resolveLocalFileSystemURI__: Retrieve a `DirectoryEntry` or `FileEntry` using local URI. _(Function)_
+
+## Constants
+
+- `LocalFileSystem.PERSISTENT`: Used for storage that should not be removed by the user agent without application or user permission.
+
+- `LocalFileSystem.TEMPORARY`: Used for storage with no guarantee of persistence.
+
+## Details
+
+The `LocalFileSystem` object methods are defined on the `window` object.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Request File System Quick Example
+
+    function onSuccess(fileSystem) {
+        console.log(fileSystem.name);
+    }
+
+    // request the persistent file system
+    window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, onSuccess, onError);
+
+## Resolve Local File System URI Quick Example
+
+    function onSuccess(fileEntry) {
+        console.log(fileEntry.name);
+    }
+
+    window.resolveLocalFileSystemURI("file:///example.txt", onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Local File System Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, onFileSystemSuccess, fail);
+            window.resolveLocalFileSystemURI("file:///example.txt", onResolveSuccess, fail);
+        }
+
+        function onFileSystemSuccess(fileSystem) {
+            console.log(fileSystem.name);
+        }
+
+        function onResolveSuccess(fileEntry) {
+            console.log(fileEntry.name);
+        }
+
+        function fail(error) {
+            console.log(error.code);
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+        <p>Local File System</p>
+      </body>
+    </html>
+
+# requestFileSystem
+
+> Request a file system in which to store application data.
+
+     window.requestFileSystem(type, size, successCallback, errorCallback)
+
+- __window__: reference to the global window object
+- __type__: local file system type, see LocalFileSystem Constants
+- __size__: indicates how much storage space, in bytes, the application expects to need
+- __successCallback__: invoked with a FileSystem object
+- __errorCallback__:  invoked if error occurs retrieving file system
+
+## Request File System Quick Example
+
+    function onSuccess(fileSystem) {
+        console.log(fileSystem.name);
+    }
+
+    // request the persistent file system
+    window.requestFileSystem(LocalFileSystem.PERSISTENT, 0, onSuccess, onError);
diff --git a/docs/en/3.3.0/cordova/file/metadata/metadata.md b/docs/en/3.3.0/cordova/file/metadata/metadata.md
new file mode 100644
index 0000000..d398722
--- /dev/null
+++ b/docs/en/3.3.0/cordova/file/metadata/metadata.md
@@ -0,0 +1,50 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Metadata
+
+An interface that supplies information about the state of a file or directory.
+
+## Properties
+
+- __modificationTime__: The time when the file or directory was last modified. _(Date)_
+
+## Details
+
+The `Metadata` object represents information about the state of a file
+or directory.  Calling a `DirectoryEntry` or `FileEntry` object's
+`getMetadata()` method results in a `Metadata` instance.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    function win(metadata) {
+        console.log("Last Modified: " + metadata.modificationTime);
+    }
+
+    // Request the metadata object for this entry
+    entry.getMetadata(win, null);
diff --git a/docs/en/3.3.0/cordova/geolocation/Coordinates/coordinates.md b/docs/en/3.3.0/cordova/geolocation/Coordinates/coordinates.md
new file mode 100644
index 0000000..175b76e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/Coordinates/coordinates.md
@@ -0,0 +1,130 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Coordinates
+
+A set of properties that describe the geographic coordinates of a position.
+
+## Properties
+
+* __latitude__: Latitude in decimal degrees. _(Number)_
+
+* __longitude__: Longitude in decimal degrees. _(Number)_
+
+* __altitude__: Height of the position in meters above the ellipsoid. _(Number)_
+
+* __accuracy__: Accuracy level of the latitude and longitude coordinates in meters. _(Number)_
+
+* __altitudeAccuracy__: Accuracy level of the altitude coordinate in meters. _(Number)_
+
+* __heading__: Direction of travel, specified in degrees counting clockwise relative to the true north. _(Number)_
+
+* __speed__: Current ground speed of the device, specified in meters per second. _(Number)_
+
+## Description
+
+The `Coordinates` object is attached to the `Position` object that is
+available to callback functions in requests for the current position.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // onSuccess Callback
+    //
+    var onSuccess = function(position) {
+        alert('Latitude: '          + position.coords.latitude          + '\n' +
+              'Longitude: '         + position.coords.longitude         + '\n' +
+              'Altitude: '          + position.coords.altitude          + '\n' +
+              'Accuracy: '          + position.coords.accuracy          + '\n' +
+              'Altitude Accuracy: ' + position.coords.altitudeAccuracy  + '\n' +
+              'Heading: '           + position.coords.heading           + '\n' +
+              'Speed: '             + position.coords.speed             + '\n' +
+              'Timestamp: '         + position.timestamp                + '\n');
+    };
+
+    // onError Callback
+    //
+    var onError = function() {
+        alert('onError!');
+    };
+
+    navigator.geolocation.getCurrentPosition(onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Geolocation Position Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.geolocation.getCurrentPosition(onSuccess, onError);
+        }
+
+        // Display `Position` properties from the geolocation
+        //
+        function onSuccess(position) {
+            var div = document.getElementById('myDiv');
+
+            div.innerHTML = 'Latitude: '             + position.coords.latitude         + '<br/>' +
+                            'Longitude: '            + position.coords.longitude        + '<br/>' +
+                            'Altitude: '             + position.coords.altitude         + '<br/>' +
+                            'Accuracy: '             + position.coords.accuracy         + '<br/>' +
+                            'Altitude Accuracy: '    + position.coords.altitudeAccuracy + '<br/>' +
+                            'Heading: '              + position.coords.heading          + '<br/>' +
+                            'Speed: '                + position.coords.speed            + '<br/>';
+        }
+
+        // Show an alert if there is a problem getting the geolocation
+        //
+        function onError() {
+            alert('onError!');
+        }
+
+        </script>
+      </head>
+      <body>
+        <div id="myDiv"></div>
+      </body>
+    </html>
+
+##  Amazon Fire OS Quirks
+
+__altitudeAccuracy__: Not supported by Android devices, returning `null`.
+
+## Android Quirks
+
+__altitudeAccuracy__: Not supported by Android devices, returning `null`.
diff --git a/docs/en/3.3.0/cordova/geolocation/Position/position.md b/docs/en/3.3.0/cordova/geolocation/Position/position.md
new file mode 100644
index 0000000..ace6e53
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/Position/position.md
@@ -0,0 +1,114 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Position
+
+Contains `Position` coordinates and timestamp, created by the geolocation API.
+
+## Properties
+
+- __coords__: A set of geographic coordinates. _(Coordinates)_
+
+- __timestamp__: Creation timestamp for `coords`. _(Date)_
+
+## Description
+
+The `Position` object is created and populated by Cordova, and returned to the user through a callback function.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // onSuccess Callback
+    //
+    var onSuccess = function(position) {
+        alert('Latitude: '          + position.coords.latitude          + '\n' +
+              'Longitude: '         + position.coords.longitude         + '\n' +
+              'Altitude: '          + position.coords.altitude          + '\n' +
+              'Accuracy: '          + position.coords.accuracy          + '\n' +
+              'Altitude Accuracy: ' + position.coords.altitudeAccuracy  + '\n' +
+              'Heading: '           + position.coords.heading           + '\n' +
+              'Speed: '             + position.coords.speed             + '\n' +
+              'Timestamp: '         + position.timestamp                + '\n');
+    };
+
+    // onError Callback receives a PositionError object
+    //
+    function onError(error) {
+        alert('code: '    + error.code    + '\n' +
+              'message: ' + error.message + '\n');
+    }
+
+    navigator.geolocation.getCurrentPosition(onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.geolocation.getCurrentPosition(onSuccess, onError);
+        }
+
+        // onSuccess Geolocation
+        //
+        function onSuccess(position) {
+            var element = document.getElementById('geolocation');
+            element.innerHTML = 'Latitude: '          + position.coords.latitude         + '<br />' +
+                                'Longitude: '         + position.coords.longitude        + '<br />' +
+                                'Altitude: '          + position.coords.altitude         + '<br />' +
+                                'Accuracy: '          + position.coords.accuracy         + '<br />' +
+                                'Altitude Accuracy: ' + position.coords.altitudeAccuracy + '<br />' +
+                                'Heading: '           + position.coords.heading          + '<br />' +
+                                'Speed: '             + position.coords.speed            + '<br />' +
+                                'Timestamp: '         + position.timestamp               + '<br />';
+        }
+
+            // onError Callback receives a PositionError object
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+        </script>
+      </head>
+      <body>
+        <p id="geolocation">Finding geolocation...</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/geolocation/PositionError/positionError.md b/docs/en/3.3.0/cordova/geolocation/PositionError/positionError.md
new file mode 100755
index 0000000..e53eef8
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/PositionError/positionError.md
@@ -0,0 +1,54 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# PositionError
+
+A `PositionError` object is passed to the `geolocationError` callback when an error occurs.
+
+## Properties
+
+- __code__: One of the predefined error codes listed below.
+
+- __message__: Error message describing the details of the error encountered.
+
+## Constants
+
+- `PositionError.PERMISSION_DENIED`
+- `PositionError.POSITION_UNAVAILABLE`
+- `PositionError.TIMEOUT`
+
+## Description
+
+The `PositionError` object is passed to the `geolocationError`
+callback function when an error occurs with geolocation. It features
+the following error codes:
+
+- `PositionError.PERMISSION_DENIED`: Returned when users do not allow
+  the app to retrieve position information. This is dependent on the
+  platform.
+
+- `PositionError.POSITION_UNAVAILABLE`: Returned when the device is
+  unable to retrieve a position. In general, this means the device is
+  not connected to a network or can't get a satellite fix.
+
+- `PositionError.TIMEOUT`: Returned when the device is unable to
+  retrieve a position within the time specified by the `timeout`
+  included in `geolocationOptions`. When used with
+  `geolocation.watchPosition`, this error could be repeatedly passed
+  to the `geolocationError` callback every `timeout` milliseconds.
diff --git a/docs/en/3.3.0/cordova/geolocation/geolocation.clearWatch.md b/docs/en/3.3.0/cordova/geolocation/geolocation.clearWatch.md
new file mode 100644
index 0000000..d405c5c
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/geolocation.clearWatch.md
@@ -0,0 +1,114 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# geolocation.clearWatch
+
+Stop watching for changes to the device's location referenced by the
+`watchID` parameter.
+
+    navigator.geolocation.clearWatch(watchID);
+
+## Parameters
+
+- __watchID__: The id of the `watchPosition` interval to clear. (String)
+
+## Description
+
+The `geolocation.clearWatch` stops watching changes to the device's
+location by clearing the `geolocation.watchPosition` referenced by
+`watchID`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Options: watch for changes in position, and use the most
+    // accurate position acquisition method available.
+    //
+    var watchID = navigator.geolocation.watchPosition(onSuccess, onError, { enableHighAccuracy: true });
+
+    // ...later on...
+
+    navigator.geolocation.clearWatch(watchID);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        var watchID = null;
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Get the most accurate position updates available on the
+            // device.
+            var options = { enableHighAccuracy: true };
+            watchID = navigator.geolocation.watchPosition(onSuccess, onError, options);
+        }
+
+        // onSuccess Geolocation
+        //
+        function onSuccess(position) {
+            var element = document.getElementById('geolocation');
+            element.innerHTML = 'Latitude: '  + position.coords.latitude      + '<br />' +
+                                'Longitude: ' + position.coords.longitude     + '<br />' +
+                                '<hr />'      + element.innerHTML;
+        }
+
+        // clear the watch that was started earlier
+        //
+        function clearWatch() {
+            if (watchID != null) {
+                navigator.geolocation.clearWatch(watchID);
+                watchID = null;
+            }
+        }
+
+            // onError Callback receives a PositionError object
+            //
+            function onError(error) {
+              alert('code: '    + error.code    + '\n' +
+                    'message: ' + error.message + '\n');
+            }
+
+        </script>
+      </head>
+      <body>
+        <p id="geolocation">Watching geolocation...</p>
+            <button onclick="clearWatch();">Clear Watch</button>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/geolocation/geolocation.getCurrentPosition.md b/docs/en/3.3.0/cordova/geolocation/geolocation.getCurrentPosition.md
new file mode 100644
index 0000000..f30c356
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/geolocation.getCurrentPosition.md
@@ -0,0 +1,126 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# geolocation.getCurrentPosition
+
+Returns the device's current position as a `Position` object.
+
+    navigator.geolocation.getCurrentPosition(geolocationSuccess,
+                                             [geolocationError],
+                                             [geolocationOptions]);
+
+## Parameters
+
+- __geolocationSuccess__: The callback that is passed the current position.
+
+- __geolocationError__: _(Optional)_ The callback that executes if an error occurs.
+
+- __geolocationOptions__: _(Optional)_ The geolocation options.
+
+## Description
+
+`geolocation.getCurrentPosition` is an asynchronous function. It
+returns the device's current position to the `geolocationSuccess`
+callback with a `Position` object as the parameter.  If there is an
+error, the `geolocationError` callback is passed a
+`PositionError` object.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // onSuccess Callback
+    // This method accepts a Position object, which contains the
+    // current GPS coordinates
+    //
+    var onSuccess = function(position) {
+        alert('Latitude: '          + position.coords.latitude          + '\n' +
+              'Longitude: '         + position.coords.longitude         + '\n' +
+              'Altitude: '          + position.coords.altitude          + '\n' +
+              'Accuracy: '          + position.coords.accuracy          + '\n' +
+              'Altitude Accuracy: ' + position.coords.altitudeAccuracy  + '\n' +
+              'Heading: '           + position.coords.heading           + '\n' +
+              'Speed: '             + position.coords.speed             + '\n' +
+              'Timestamp: '         + position.timestamp                + '\n');
+    };
+
+    // onError Callback receives a PositionError object
+    //
+    function onError(error) {
+        alert('code: '    + error.code    + '\n' +
+              'message: ' + error.message + '\n');
+    }
+
+    navigator.geolocation.getCurrentPosition(onSuccess, onError);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.geolocation.getCurrentPosition(onSuccess, onError);
+        }
+
+        // onSuccess Geolocation
+        //
+        function onSuccess(position) {
+            var element = document.getElementById('geolocation');
+            element.innerHTML = 'Latitude: '           + position.coords.latitude              + '<br />' +
+                                'Longitude: '          + position.coords.longitude             + '<br />' +
+                                'Altitude: '           + position.coords.altitude              + '<br />' +
+                                'Accuracy: '           + position.coords.accuracy              + '<br />' +
+                                'Altitude Accuracy: '  + position.coords.altitudeAccuracy      + '<br />' +
+                                'Heading: '            + position.coords.heading               + '<br />' +
+                                'Speed: '              + position.coords.speed                 + '<br />' +
+                                'Timestamp: '          + position.timestamp                    + '<br />';
+        }
+
+        // onError Callback receives a PositionError object
+        //
+        function onError(error) {
+            alert('code: '    + error.code    + '\n' +
+                  'message: ' + error.message + '\n');
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="geolocation">Finding geolocation...</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/geolocation/geolocation.md b/docs/en/3.3.0/cordova/geolocation/geolocation.md
new file mode 100644
index 0000000..be5b067
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/geolocation.md
@@ -0,0 +1,133 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Geolocation
+
+> The `geolocation` object provides access to location data based on the device's GPS sensor or inferred from network signals.
+
+`Geolocation` provides information about the device's location, such as
+latitude and longitude. Common sources of location information include
+Global Positioning System (GPS) and location inferred from network
+signals such as IP address, RFID, WiFi and Bluetooth MAC addresses,
+and GSM/CDMA cell IDs. There is no guarantee that the API returns the
+device's actual location.
+
+This API is based on the
+[W3C Geolocation API Specification](http://dev.w3.org/geo/api/spec-source.html),
+and only executes on devices that don't already provide an implementation.
+
+__WARNING__: Collection and use of geolocation data
+raises important privacy issues.  Your app's privacy policy should
+discuss how the app uses geolocation data, whether it is shared with
+any other parties, and the level of precision of the data (for
+example, coarse, fine, ZIP code level, etc.).  Geolocation data is
+generally considered sensitive because it can reveal user's
+whereabouts and, if stored, the history of their travels.
+Therefore, in addition to the app's privacy policy, you should
+strongly consider providing a just-in-time notice before the app
+accesses geolocation data (if the device operating system doesn't do
+so already).  That notice should provide the same information noted
+above, as well as obtaining the user's permission (e.g., by presenting
+choices for __OK__ and __No Thanks__).  For more information, please
+see the Privacy Guide.
+
+## Methods
+
+- geolocation.getCurrentPosition
+- geolocation.watchPosition
+- geolocation.clearWatch
+
+## Arguments
+
+- geolocationSuccess
+- geolocationError
+- geolocationOptions
+
+## Objects (Read-Only)
+
+- Position
+- PositionError
+- Coordinates
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.geolocation
+        $ cordova plugin ls
+        [ 'org.apache.cordova.geolocation' ]
+        $ cordova plugin rm org.apache.cordova.geolocation
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Geolocation">
+            <param name="android-package" value="org.apache.cordova.geolocation.GeoBroker" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
+        <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Geolocation">
+            <param name="android-package" value="org.apache.cordova.geolocation.GeoBroker" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
+        <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="Geolocation" value="Geolocation" />
+        <rim:permissions>
+            <rim:permit>read_geolocation</rim:permit>
+        </rim:permissions>
+
+* FirefoxOS (in the manifest.webapp file)
+
+        "permissions": {
+            "geolocation": { "description": "Used to position the map to your current position" }
+        }
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Geolocation">
+            <param name="ios-package" value="CDVLocation" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_LOCATION" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/geolocation/geolocation.watchPosition.md b/docs/en/3.3.0/cordova/geolocation/geolocation.watchPosition.md
new file mode 100644
index 0000000..03effc6
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/geolocation.watchPosition.md
@@ -0,0 +1,128 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# geolocation.watchPosition
+
+Watches for changes to the device's current position.
+
+    var watchId = navigator.geolocation.watchPosition(geolocationSuccess,
+                                                      [geolocationError],
+                                                      [geolocationOptions]);
+
+## Parameters
+
+- __geolocationSuccess__: The callback that is passed the current position.
+
+- __geolocationError__: (Optional) The callback that executes if an error occurs.
+
+- __geolocationOptions__: (Optional) The geolocation options.
+
+## Returns
+
+- __String__: returns a watch id that references the watch position interval. The watch id should be used with `geolocation.clearWatch` to stop watching for changes in position.
+
+## Description
+
+`geolocation.watchPosition` is an asynchronous function. It returns
+the device's current position when a change in position is detected.
+When the device retrieves a new location, the `geolocationSuccess`
+callback executes with a `Position` object as the parameter.  If
+there is an error, the `geolocationError` callback executes with a
+`PositionError` object as the parameter.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // onSuccess Callback
+    //   This method accepts a `Position` object, which contains
+    //   the current GPS coordinates
+    //
+    function onSuccess(position) {
+        var element = document.getElementById('geolocation');
+        element.innerHTML = 'Latitude: '  + position.coords.latitude      + '<br />' +
+                            'Longitude: ' + position.coords.longitude     + '<br />' +
+                            '<hr />'      + element.innerHTML;
+    }
+
+    // onError Callback receives a PositionError object
+    //
+    function onError(error) {
+        alert('code: '    + error.code    + '\n' +
+              'message: ' + error.message + '\n');
+    }
+
+    // Options: throw an error if no update is received every 30 seconds.
+    //
+    var watchID = navigator.geolocation.watchPosition(onSuccess, onError, { timeout: 30000 });
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        var watchID = null;
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Throw an error if no update is received every 30 seconds
+            var options = { timeout: 30000 };
+            watchID = navigator.geolocation.watchPosition(onSuccess, onError, options);
+        }
+
+        // onSuccess Geolocation
+        //
+        function onSuccess(position) {
+            var element = document.getElementById('geolocation');
+            element.innerHTML = 'Latitude: '  + position.coords.latitude      + '<br />' +
+                                'Longitude: ' + position.coords.longitude     + '<br />' +
+                                '<hr />'      + element.innerHTML;
+        }
+
+            // onError Callback receives a PositionError object
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+        </script>
+      </head>
+      <body>
+        <p id="geolocation">Watching geolocation...</p>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/geolocation/parameters/geolocation.options.md b/docs/en/3.3.0/cordova/geolocation/parameters/geolocation.options.md
new file mode 100644
index 0000000..b338e08
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/parameters/geolocation.options.md
@@ -0,0 +1,38 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# geolocationOptions
+
+Optional parameters to customize the retrieval of the geolocation
+`Position`.
+
+    { maximumAge: 3000, timeout: 5000, enableHighAccuracy: true };
+
+## Options
+
+- __enableHighAccuracy__: Provides a hint that the application needs the best possible results. By default, the device attempts to retrieve a `Position` using network-based methods. Setting this property to `true` tells the framework to use more accurate methods, such as satellite positioning. _(Boolean)_
+
+- __timeout__: The maximum length of time (milliseconds) that is allowed to pass from the call to `geolocation.getCurrentPosition` or `geolocation.watchPosition` until the corresponding `geolocationSuccess` callback executes. If the `geolocationSuccess` callback is not invoked within this time, the `geolocationError` callback is passed a `PositionError.TIMEOUT` error code. (Note that when used in conjunction with `geolocation.watchPosition`, the `geolocationError` callback could be called on an interval every `timeout` milliseconds!) _(Number)_
+
+- __maximumAge__: Accept a cached position whose age is no greater than the specified time in milliseconds. _(Number)_
+
+## Android Quirks
+
+Android 2.x emulators do not return a geolocation result unless the `enableHighAccuracy` option is set to `true`.
+
diff --git a/docs/en/3.3.0/cordova/geolocation/parameters/geolocationError.md b/docs/en/3.3.0/cordova/geolocation/parameters/geolocationError.md
new file mode 100644
index 0000000..c968208
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/parameters/geolocationError.md
@@ -0,0 +1,31 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# geolocationError
+
+The user's callback function that executes when there is an error for
+geolocation functions.
+
+    function(error) {
+        // Handle the error
+    }
+
+## Parameters
+
+- __error__: The error returned by the device. _(PositionError)_
diff --git a/docs/en/3.3.0/cordova/geolocation/parameters/geolocationSuccess.md b/docs/en/3.3.0/cordova/geolocation/parameters/geolocationSuccess.md
new file mode 100644
index 0000000..116b493
--- /dev/null
+++ b/docs/en/3.3.0/cordova/geolocation/parameters/geolocationSuccess.md
@@ -0,0 +1,46 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# geolocationSuccess
+
+The user's callback function that executes when a geolocation position
+becomes available (when called from `geolocation.getCurrentPosition`),
+or when the position changes (when called from
+`geolocation.watchPosition`).
+
+    function(position) {
+        // Do something
+    }
+
+## Parameters
+
+- __position__: The geolocation position returned by the device. _(Position)_
+
+## Example
+
+    function geolocationSuccess(position) {
+        alert('Latitude: '          + position.coords.latitude          + '\n' +
+              'Longitude: '         + position.coords.longitude         + '\n' +
+              'Altitude: '          + position.coords.altitude          + '\n' +
+              'Accuracy: '          + position.coords.accuracy          + '\n' +
+              'Altitude Accuracy: ' + position.coords.altitudeAccuracy  + '\n' +
+              'Heading: '           + position.coords.heading           + '\n' +
+              'Speed: '             + position.coords.speed             + '\n' +
+              'Timestamp: '         + position.timestamp                + '\n');
+    }
diff --git a/docs/en/3.3.0/cordova/globalization/GlobalizationError/globalizationerror.md b/docs/en/3.3.0/cordova/globalization/GlobalizationError/globalizationerror.md
new file mode 100644
index 0000000..8c74090
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/GlobalizationError/globalizationerror.md
@@ -0,0 +1,88 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# GlobalizationError
+
+An object representing a error from the Globalization API.
+
+## Properties
+
+- __code__:  One of the following codes representing the error type _(Number)_
+  - GlobalizationError.UNKNOWN\_ERROR: 0
+  - GlobalizationError.FORMATTING\_ERROR: 1
+  - GlobalizationError.PARSING\_ERROR: 2
+  - GlobalizationError.PATTERN\_ERROR: 3
+- __message__:  A text message that includes the error's explanation and/or details _(String)_
+
+## Description
+
+This object is created and populated by Cordova, and returned to a callback in the case of an error.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+
+## Quick Example
+
+When the following error callback executes, it displays a
+popup dialog with the text similar to `code: 3` and `message:`
+
+    function errorCallback(error) {
+        alert('code: ' + error.code + '\n' +
+              'message: ' + error.message + '\n');
+    };
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>GlobalizationError Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function successCallback(date) {
+          alert('month:' + date.month +
+                ' day:' + date.day +
+                ' year:' + date.year + '\n');
+        }
+
+        function errorCallback(error) {
+          alert('code: ' + error.code + '\n' +
+                'message: ' + error.message + '\n');
+        };
+
+        function checkError() {
+          navigator.globalization.stringToDate(
+            'notADate',
+            successCallback,
+            errorCallback,
+            {selector:'foobar'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkError()">Click for error</button>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.dateToString.md b/docs/en/3.3.0/cordova/globalization/globalization.dateToString.md
new file mode 100644
index 0000000..8621ce2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.dateToString.md
@@ -0,0 +1,91 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.dateToString
+
+Returns a date formatted as a string according to the client's locale and timezone.
+
+    navigator.globalization.dateToString(date, successCallback, errorCallback, options);
+
+## Description
+
+Returns the formatted date `String` via a `value` property accessible
+from the object passed as a parameter to the `successCallback`.
+
+The inbound `date` parameter should be of type `Date`.
+
+If there is an error formatting the date, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.FORMATTING\_ERROR`.
+
+The `options` parameter is optional, and its default values are:
+
+    {formatLength:'short', selector:'date and time'}
+
+The `options.formatLength` can be `short`, `medium`, `long`, or `full`.
+
+The `options.selector` can be `date`, `time` or `date and time`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+If the browser is set to the `en\_US` locale, this displays a popup
+dialog with text similar to `date: 9/25/2012 4:21PM` using the default
+options:
+
+    navigator.globalization.dateToString(
+        new Date(),
+        function (date) { alert('date: ' + date.value + '\n'); },
+        function () { alert('Error getting dateString\n'); },
+        { formatLength: 'short', selector: 'date and time' }
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>dateToString Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkDateString() {
+          navigator.globalization.dateToString(
+            new Date(),
+            function (date) {alert('date: ' + date.value + '\n');},
+            function () {alert('Error getting dateString\n');,
+            {formatLength:'short', selector:'date and time'}}
+          );
+        }
+        </script>
+      </head>
+      <body>
+        <button onclick="checkDateString()">Click for date string</button>
+      </body>
+    </html>
+
+## Windows Phone 8 Quirks
+
+- The `formatLength` option supports only `short` and `full` values.
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getCurrencyPattern.md b/docs/en/3.3.0/cordova/globalization/globalization.getCurrencyPattern.md
new file mode 100644
index 0000000..635c08c
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getCurrencyPattern.md
@@ -0,0 +1,112 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getCurrencyPattern
+
+Returns a pattern string to format and parse currency values according
+to the client's user preferences and ISO 4217 currency code.
+
+     navigator.globalization.getCurrencyPattern(currencyCode, successCallback, errorCallback);
+
+## Description
+
+Returns the pattern to the `successCallback` with a `properties` object
+as a parameter. That object should contain the following properties:
+
+- __pattern__: The currency pattern to format and parse currency values.  The patterns follow [Unicode Technical Standard #35](http://unicode.org/reports/tr35/tr35-4.html). _(String)_
+
+- __code__: The ISO 4217 currency code for the pattern. _(String)_
+
+- __fraction__: The number of fractional digits to use when parsing and formatting currency. _(Number)_
+
+- __rounding__: The rounding increment to use when parsing and formatting. _(Number)_
+
+- __decimal__: The decimal symbol to use for parsing and formatting. _(String)_
+
+- __grouping__: The grouping symbol to use for parsing and formatting. _(String)_
+
+The inbound `currencyCode` parameter should be a `String` of one of
+the ISO 4217 currency codes, for example 'USD'.
+
+If there is an error obtaining the pattern, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.FORMATTING\_ERROR`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale and the selected
+currency is United States Dollars, this example displays a popup
+dialog with text similar to the results that follow:
+
+    navigator.globalization.getCurrencyPattern(
+        'USD',
+        function (pattern) {
+            alert('pattern: '  + pattern.pattern  + '\n' +
+                  'code: '     + pattern.code     + '\n' +
+                  'fraction: ' + pattern.fraction + '\n' +
+                  'rounding: ' + pattern.rounding + '\n' +
+                  'decimal: '  + pattern.decimal  + '\n' +
+                  'grouping: ' + pattern.grouping);
+        },
+        function () { alert('Error getting pattern\n'); }
+    );
+
+Expected result:
+
+    pattern: $#,##0.##;($#,##0.##)
+    code: USD
+    fraction: 2
+    rounding: 0
+    decimal: .
+    grouping: ,
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getCurrencyPattern Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkPattern() {
+          navigator.globalization.getCurrencyPattern(
+            'USD',
+            function (pattern) {alert('pattern: '  + pattern.pattern  + '\n' +
+                                      'code: '     + pattern.code     + '\n' +
+                                      'fraction: ' + pattern.fraction + '\n' +
+                                      'rounding: ' + pattern.rounding + '\n' +
+                                      'decimal: '  + pattern.decimal  + '\n' +
+                                      'grouping: ' + pattern.grouping);},
+            function () {alert('Error getting pattern\n');}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkPattern()">Click for pattern</button>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getDateNames.md b/docs/en/3.3.0/cordova/globalization/globalization.getDateNames.md
new file mode 100644
index 0000000..9379b05
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getDateNames.md
@@ -0,0 +1,97 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getDateNames
+
+Returns an array of the names of the months or days of the week,
+depending on the client's user preferences and calendar.
+
+    navigator.globalization.getDateNames(successCallback, errorCallback, options);
+
+## Description
+
+Returns the array of names to the `successCallback` with a
+`properties` object as a parameter. That object contains a `value`
+property with an `Array` of `String` values. The array features names
+starting from either the first month in the year or the first day of
+the week, depending on the option selected.
+
+If there is an error obtaining the names, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.UNKNOWN\_ERROR`.
+
+The `options` parameter is optional, and its default values are:
+
+    {type:'wide', item:'months'}
+
+The value of `options.type` can be `narrow` or `wide`.
+
+The value of `options.item` can be `months` or `days`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this example displays
+a series of twelve popup dialogs, one per month, with text similar to
+`month: January`:
+
+    navigator.globalization.getDateNames(
+        function (names) {
+            for (var i = 0; i < names.value.length; i++) {
+                alert('month: ' + names.value[i] + '\n');
+            }
+        },
+        function () { alert('Error getting names\n'); },
+        { type: 'wide', item: 'months' }
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getDateNames Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkDateNames() {
+          navigator.globalization.getDateNames(
+            function (names) {
+              for (var i=0; i<names.value.length; i++) {
+                alert('month: ' + names.value[i] + '\n');
+              }
+            },
+            function () {alert('Error getting names\n');},
+            {type:'wide', item:'months'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkDateNames()">Click for date names</button>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getDatePattern.md b/docs/en/3.3.0/cordova/globalization/globalization.getDatePattern.md
new file mode 100644
index 0000000..210e4a9
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getDatePattern.md
@@ -0,0 +1,105 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getDatePattern
+
+Returns a pattern string to format and parse dates according to the
+client's user preferences.
+
+    navigator.globalization.getDatePattern(successCallback, errorCallback, options);
+
+## Description
+
+Returns the pattern to the `successCallback`. The object passed in as
+a parameter contains the following properties:
+
+- __pattern__: The date and time pattern to format and parse dates. The patterns follow [Unicode Technical Standard #35](http://unicode.org/reports/tr35/tr35-4.html). _(String)_
+
+- __timezone__: The abbreviated name of the time zone on the client. _(String)_
+
+- __utc\_offset__: The current difference in seconds between the client's time zone and coordinated universal time. _(Number)_
+
+- __dst\_offset__: The current daylight saving time offset in seconds between the client's non-daylight saving's time zone and the client's daylight saving's time zone. _(Number)_
+
+If there is an error obtaining the pattern, the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.PATTERN\_ERROR`.
+
+The `options` parameter is optional, and defaults to the following values:
+
+    {formatLength:'short', selector:'date and time'}
+
+The `options.formatLength` can be `short`, `medium`, `long`, or
+`full`.  The `options.selector` can be `date`, `time` or `date and
+time`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this example displays
+a popup dialog with text such as `pattern: M/d/yyyy h:mm a`:
+
+    function checkDatePattern() {
+        navigator.globalization.getDatePattern(
+            function (date) { alert('pattern: ' + date.pattern + '\n'); },
+            function () { alert('Error getting pattern\n'); },
+            { formatLength: 'short', selector: 'date and time' }
+        );
+    }
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getDatePattern Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkDatePattern() {
+          navigator.globalization.getDatePattern(
+            function (date) {alert('pattern: ' + date.pattern + '\n');},
+            function () {alert('Error getting pattern\n');},
+            {formatLength:'short', selector:'date and time'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkDatePattern()">Click for pattern</button>
+      </body>
+    </html>
+
+## Windows Phone 8 Quirks
+
+- The `formatLength` supports only `short` and `full` values.
+
+- The `pattern` for `date and time` pattern returns only full datetime format.
+
+- The `timezone` returns the full time zone name.
+
+- The `dst_offset` property is not supported, and always returns zero.
+
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getFirstDayOfWeek.md b/docs/en/3.3.0/cordova/globalization/globalization.getFirstDayOfWeek.md
new file mode 100644
index 0000000..08338d1
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getFirstDayOfWeek.md
@@ -0,0 +1,77 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getFirstDayOfWeek
+
+Returns the first day of the week according to the client's user
+preferences and calendar.
+
+    navigator.globalization.getFirstDayOfWeek(successCallback, errorCallback);
+
+## Description
+
+The days of the week are numbered starting from 1, where 1 is assumed
+to be Sunday.  Returns the day to the `successCallback` with a
+`properties` object as a parameter. That object should have a `value`
+property with a `Number` value.
+
+If there is an error obtaining the pattern, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.UNKNOWN\_ERROR`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this displays a
+popup dialog with text similar to `day: 1`.
+
+    navigator.globalization.getFirstDayOfWeek(
+        function (day) {alert('day: ' + day.value + '\n');},
+        function () {alert('Error getting day\n');}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getFirstDayOfWeek Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkFirstDay() {
+          navigator.globalization.getFirstDayOfWeek(
+            function (day) {alert('day: ' + day.value + '\n');},
+            function () {alert('Error getting day\n');}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkFirstDay()">Click for first day of week</button>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getLocaleName.md b/docs/en/3.3.0/cordova/globalization/globalization.getLocaleName.md
new file mode 100644
index 0000000..0da6e56
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getLocaleName.md
@@ -0,0 +1,77 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getLocaleName
+
+Get the string identifier for the client's current locale setting.
+
+    navigator.globalization.getLocaleName(successCallback, errorCallback);
+
+## Description
+
+Returns the locale identifier string to the `successCallback` with a
+`properties` object as a parameter. That object should have a `value`
+property with a `String` value.
+
+If there is an error getting the locale, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.UNKNOWN\_ERROR`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this displays a popup
+dialog with the text `locale: en\_US`.
+
+    navigator.globalization.getLocaleName(
+        function (locale) {alert('locale: ' + locale.value + '\n');},
+        function () {alert('Error getting locale\n');}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getLocaleName Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkLocale() {
+          navigator.globalization.getLocaleName(
+            function (locale) {alert('locale: ' + locale.value + '\n');},
+            function () {alert('Error getting locale\n');}
+          );
+        }
+        </script>
+      </head>
+      <body>
+        <button onclick="checkLocale()">Click for locale</button>
+      </body>
+    </html>
+
+## Windows Phone 8 Quirks
+
+- Returns the two-letter code defined in ISO 3166 for the current country/region.
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getNumberPattern.md b/docs/en/3.3.0/cordova/globalization/globalization.getNumberPattern.md
new file mode 100644
index 0000000..b6915a0
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getNumberPattern.md
@@ -0,0 +1,128 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getNumberPattern
+
+Returns a pattern string to format and parse numbers according to the client's user preferences.
+
+    navigator.globalization.getNumberPattern(successCallback, errorCallback, options);
+
+## Description
+
+Returns the pattern to the `successCallback` with a `properties` object
+as a parameter. That object contains the following properties:
+
+- __pattern__: The number pattern to format and parse numbers.  The patterns follow [Unicode Technical Standard #35](http://unicode.org/reports/tr35/tr35-4.html). _(String)_
+
+- __symbol__: The symbol to use when formatting and parsing, such as a percent or currency symbol. _(String)_
+
+- __fraction__: The number of fractional digits to use when parsing and formatting numbers. _(Number)_
+
+- __rounding__: The rounding increment to use when parsing and formatting. _(Number)_
+
+- __positive__: The symbol to use for positive numbers when parsing and formatting. _(String)_
+
+- __negative__: The symbol to use for negative numbers when parsing and formatting. _(String)_
+
+- __decimal__: The decimal symbol to use for parsing and formatting. _(String)_
+
+- __grouping__: The grouping symbol to use for parsing and formatting. _(String)_
+
+If there is an error obtaining the pattern, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.PATTERN\_ERROR`.
+
+The `options` parameter is optional, and default values are:
+
+    {type:'decimal'}
+
+The `options.type` can be `decimal`, `percent`, or `currency`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this should display a
+popup dialog with text similar to the results that follow:
+
+    navigator.globalization.getNumberPattern(
+        function (pattern) {alert('pattern: '  + pattern.pattern  + '\n' +
+                                  'symbol: '   + pattern.symbol   + '\n' +
+                                  'fraction: ' + pattern.fraction + '\n' +
+                                  'rounding: ' + pattern.rounding + '\n' +
+                                  'positive: ' + pattern.positive + '\n' +
+                                  'negative: ' + pattern.negative + '\n' +
+                                  'decimal: '  + pattern.decimal  + '\n' +
+                                  'grouping: ' + pattern.grouping);},
+        function () {alert('Error getting pattern\n');},
+        {type:'decimal'}
+    );
+
+Results:
+
+    pattern: #,##0.###
+    symbol: .
+    fraction: 0
+    rounding: 0
+    positive:
+    negative: -
+    decimal: .
+    grouping: ,
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getNumberPattern Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkPattern() {
+          navigator.globalization.getNumberPattern(
+            function (pattern) {alert('pattern: '  + pattern.pattern  + '\n' +
+                                      'symbol: '   + pattern.symbol   + '\n' +
+                                      'fraction: ' + pattern.fraction + '\n' +
+                                      'rounding: ' + pattern.rounding + '\n' +
+                                      'positive: ' + pattern.positive + '\n' +
+                                      'negative: ' + pattern.negative + '\n' +
+                                      'decimal: '  + pattern.decimal  + '\n' +
+                                      'grouping: ' + pattern.grouping);},
+            function () {alert('Error getting pattern\n');},
+            {type:'decimal'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkPattern()">Click for pattern</button>
+      </body>
+    </html>
+
+## Windows Phone 8 Quirks
+
+- The `pattern` property is not supported, and retuens an empty string.
+
+- The `fraction` property is not supported, and returns zero.
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.getPreferredLanguage.md b/docs/en/3.3.0/cordova/globalization/globalization.getPreferredLanguage.md
new file mode 100644
index 0000000..d036cab
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.getPreferredLanguage.md
@@ -0,0 +1,77 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.getPreferredLanguage
+
+Get the string identifier for the client's current language.
+
+    navigator.globalization.getPreferredLanguage(successCallback, errorCallback);
+
+## Description
+
+Returns the language identifier string to the `successCallback` with a
+`properties` object as a parameter. That object should have a `value`
+property with a `String` value.
+
+If there is an error getting the language, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.UNKNOWN\_ERROR`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this should display a
+popup dialog with the text `language: English`:
+
+    navigator.globalization.getPreferredLanguage(
+        function (language) {alert('language: ' + language.value + '\n');},
+        function () {alert('Error getting language\n');}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>getPreferredLanguage Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkLanguage() {
+          navigator.globalization.getPreferredLanguage(
+            function (language) {alert('language: ' + language.value + '\n');},
+            function () {alert('Error getting language\n');}
+          );
+        }
+        </script>
+      </head>
+      <body>
+        <button onclick="checkLanguage()">Click for language</button>
+      </body>
+    </html>
+
+## Windows Phone 8 Quirks
+
+- Returns the ISO 639-1 two-letter code for the current language.
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.isDayLightSavingsTime.md b/docs/en/3.3.0/cordova/globalization/globalization.isDayLightSavingsTime.md
new file mode 100644
index 0000000..6d7fd23
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.isDayLightSavingsTime.md
@@ -0,0 +1,82 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.isDayLightSavingsTime
+
+Indicates whether daylight savings time is in effect for a given date
+using the client's time zone and calendar.
+
+    navigator.globalization.isDayLightSavingsTime(date, successCallback, errorCallback);
+
+## Description
+
+Indicates whether or not daylight savings time is in effect to the
+`successCallback` with a `properties` object as a parameter. That object
+should have a `dst` property with a `Boolean` value. A `true` value
+indicates that daylight savings time is in effect for the given date,
+and `false` indicates that it is not.
+
+The inbound parameter `date` should be of type `Date`.
+
+If there is an error reading the date, then the `errorCallback`
+executes. The error's expected code is `GlobalizationError.UNKNOWN\_ERROR`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+During the summer, and if the browser is set to a DST-enabled
+timezone, this should display a popup dialog with text similar to
+`dst: true`:
+
+    navigator.globalization.isDayLightSavingsTime(
+        new Date(),
+        function (date) {alert('dst: ' + date.dst + '\n');},
+        function () {alert('Error getting names\n');}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>isDayLightSavingsTime Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkDayLightSavings() {
+          navigator.globalization.isDayLightSavingsTime(
+            new Date(),
+            function (date) {alert('dst: ' + date.dst + '\n');},
+            function () {alert('Error getting names\n');}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkDayLightSavings()">Click for daylight savings</button>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.md b/docs/en/3.3.0/cordova/globalization/globalization.md
new file mode 100644
index 0000000..dc096e6
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.md
@@ -0,0 +1,79 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Globalization
+
+Obtains information and performs operations specific to the user's
+locale and timezone.
+
+## Objects
+
+- GlobalizationError
+
+## Methods
+
+- globalization.getPreferredLanguage
+- globalization.getLocaleName
+- globalization.dateToString
+- globalization.stringToDate
+- globalization.getDatePattern
+- globalization.getDateNames
+- globalization.isDayLightSavingsTime
+- globalization.getFirstDayOfWeek
+- globalization.numberToString
+- globalization.stringToNumber
+- globalization.getNumberPattern
+- globalization.getCurrencyPattern
+
+## Variable Scope
+
+The `globalization` object is a child of the `navigator` object, and
+therefore has global scope.
+
+    // The global globalization object
+    var globalization = navigator.globalization;
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.globalization
+        $ cordova plugin ls
+        [ 'org.apache.cordova.globalization' ]
+        $ cordova plugin rm org.apache.cordova.globalization
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS(in `res/xml/config.xml`)
+
+        <feature name="Globalization">
+            <param name="android-package" value="org.apache.cordova.globalization.Globalization" />
+        </feature>
+
+* Android (in `res/xml/config.xml`)
+
+        <feature name="Globalization">
+            <param name="android-package" value="org.apache.cordova.globalization.Globalization" />
+        </feature>
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.numberToString.md b/docs/en/3.3.0/cordova/globalization/globalization.numberToString.md
new file mode 100644
index 0000000..21b9053
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.numberToString.md
@@ -0,0 +1,85 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.numberToString
+
+Returns a number formatted as a string according to the client's user preferences.
+
+    navigator.globalization.numberToString(number, successCallback, errorCallback, options);
+
+## Description
+
+Returns the formatted number string to the `successCallback` with a
+`properties` object as a parameter. That object should have a `value`
+property with a `String` value.
+
+If there is an error formatting the number, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.FORMATTING\_ERROR`.
+
+The `options` parameter is optional, and its default values are:
+
+    {type:'decimal'}
+
+The `options.type` can be 'decimal', 'percent', or 'currency'.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this displays a popup
+dialog with text similar to `number: 3.142`:
+
+    navigator.globalization.numberToString(
+        3.1415926,
+        function (number) {alert('number: ' + number.value + '\n');},
+        function () {alert('Error getting number\n');},
+        {type:'decimal'}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>numberToString Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkNumber() {
+          navigator.globalization.numberToString(
+            3.1415926,
+            function (number) {alert('number: ' + number.value + '\n');},
+            function () {alert('Error getting number\n');},
+            {type:'decimal'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkNumber()">Click for number</button>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.stringToDate.md b/docs/en/3.3.0/cordova/globalization/globalization.stringToDate.md
new file mode 100644
index 0000000..6806a3b
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.stringToDate.md
@@ -0,0 +1,114 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.stringToDate
+
+Parses a date formatted as a string, according to the client's user
+preferences and calendar using the time zone of the client, and
+returns the corresponding date object.
+
+    navigator.globalization.stringToDate(dateString, successCallback, errorCallback, options);
+
+## Description
+
+Returns the date to the success callback with a `properties` object as
+a parameter. That object should have the following properties:
+
+- __year__: The four digit year. _(Number)_
+
+- __month__: The month from (0-11). _(Number)_
+
+- __day__: The day from (1-31). _(Number)_
+
+- __hour__: The hour from (0-23). _(Number)_
+
+- __minute__: The minute from (0-59). _(Number)_
+
+- __second__: The second from (0-59). _(Number)_
+
+- __millisecond__: The milliseconds (from 0-999), not available on all platforms. _(Number)_
+
+The inbound `dateString` parameter should be of type `String`.
+
+The `options` parameter is optional, and defaults to the following
+values:
+
+    {formatLength:'short', selector:'date and time'}
+
+The `options.formatLength` can be `short`, `medium`, `long`, or
+`full`.  The `options.selector` can be `date`, `time` or `date and
+time`.
+
+If there is an error parsing the date string, then the `errorCallback`
+executes with a `GlobalizationError` object as a parameter. The
+error's expected code is `GlobalizationError.PARSING\_ERROR`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this displays a
+popup dialog with text similar to `month:8 day:25 year:2012`. Note
+that the month integer is one less than the string, as the month
+integer represents an array index.
+
+    navigator.globalization.stringToDate(
+        '9/25/2012',
+        function (date) {alert('month:' + date.month +
+                               ' day:'  + date.day   +
+                               ' year:' + date.year  + '\n');},
+        function () {alert('Error getting date\n');},
+        {selector: 'date'}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>stringToDate Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkStringDate() {
+          navigator.globalization.stringToDate(
+            '9/25/2012',
+            function (date) {alert('month:' + date.month +
+                                   ' day:' + date.day +
+                                   ' year:' + date.year + '\n');},
+            function () {alert('Error getting date\n');},
+            {selector:'date'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkStringDate()">Click for parsed date</button>
+      </body>
+    </html>
+
+## Windows Phone 8 Quirks
+
+- The `formatLength` option supports only `short` and `full` values.
diff --git a/docs/en/3.3.0/cordova/globalization/globalization.stringToNumber.md b/docs/en/3.3.0/cordova/globalization/globalization.stringToNumber.md
new file mode 100644
index 0000000..77cff90
--- /dev/null
+++ b/docs/en/3.3.0/cordova/globalization/globalization.stringToNumber.md
@@ -0,0 +1,88 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# globalization.stringToNumber
+
+Parses a number formatted as a string according to the client's user
+preferences and returns the corresponding number.
+
+    navigator.globalization.stringToNumber(string, successCallback, errorCallback, options);
+
+## Description
+
+Returns the number to the `successCallback` with a `properties` object
+as a parameter. That object should have a `value` property with a
+`Number` value.
+
+If there is an error parsing the number string, then the
+`errorCallback` executes with a `GlobalizationError` object as a
+parameter. The error's expected code is
+`GlobalizationError.PARSING\_ERROR`.
+
+The `options` parameter is optional, and defaults to the following
+values:
+
+    {type:'decimal'}
+
+The `options.type` can be `decimal`, `percent`, or `currency`.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 8
+
+## Quick Example
+
+When the browser is set to the `en\_US` locale, this should display a
+popup dialog with text similar to `number: 1234.56`:
+
+    navigator.globalization.stringToNumber(
+        '1234.56',
+        function (number) {alert('number: ' + number.value + '\n');},
+        function () {alert('Error getting number\n');},
+        {type:'decimal'}
+    );
+
+## Full Example
+
+    <!DOCTYPE HTML>
+    <html>
+      <head>
+        <title>stringToNumber Example</title>
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        function checkNumber() {
+          navigator.globalization.stringToNumber(
+            '1234.56',
+            function (number) {alert('number: ' + number.value + '\n');},
+            function () {alert('Error getting number\n');},
+            {type:'decimal'}
+          );
+        }
+
+        </script>
+      </head>
+      <body>
+        <button onclick="checkNumber()">Click for parsed number</button>
+      </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/inappbrowser/inappbrowser.md b/docs/en/3.3.0/cordova/inappbrowser/inappbrowser.md
new file mode 100644
index 0000000..0d29865
--- /dev/null
+++ b/docs/en/3.3.0/cordova/inappbrowser/inappbrowser.md
@@ -0,0 +1,497 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# InAppBrowser
+
+> The `InAppBrowser` is a web browser view that displays when calling `window.open()`, or when opening a link formed as `<a target="_blank">`.
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+
+__NOTE__: The InAppBrowser window behaves like a standard web browser,
+and can't access Cordova APIs.
+
+## Description
+
+The object returned from a call to `window.open`.
+
+## Methods
+
+- addEventListener
+- removeEventListener
+- close
+- show
+- executeScript
+- insertCSS
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.inappbrowser
+        $ cordova plugin ls
+        [ 'org.apache.cordova.inappbrowser' ]
+        $ cordova plugin rm org.apache.cordova.inappbrowser
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS (in `res/xml/config.xml`)
+
+        <feature name="InAppBrowser">
+            <param name="android-package" value="org.apache.cordova.inappbrowser.InAppBrowser" />
+        </feature>
+
+* Android (in `res/xml/config.xml`)
+
+        <feature name="InAppBrowser">
+            <param name="android-package" value="org.apache.cordova.inappbrowser.InAppBrowser" />
+        </feature>
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="InAppBrowser">
+            <param name="ios-package" value="CDVInAppBrowser" />
+        </feature>
+
+* Windows Phone 7 and 8 (in `config.xml`)
+
+        <feature name="InAppBrowser" />
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
+
+# addEventListener
+
+> Adds a listener for an event from the `InAppBrowser`.
+
+    ref.addEventListener(eventname, callback);
+
+- __ref__: reference to the `InAppBrowser` window _(InAppBrowser)_
+
+- __eventname__: the event to listen for _(String)_
+
+  - __loadstart__: event fires when the `InAppBrowser` starts to load a URL.
+  - __loadstop__: event fires when the `InAppBrowser` finishes loading a URL.
+  - __loaderror__: event fires when the `InAppBrowser` encounters an error when loading a URL.
+  - __exit__: event fires when the `InAppBrowser` window is closed.
+
+- __callback__: the function that executes when the event fires. The function is passed an `InAppBrowserEvent` object as a parameter.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+    ref.addEventListener('loadstart', function() { alert(event.url); });
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>InAppBrowser.addEventListener Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+             var ref = window.open('http://apache.org', '_blank', 'location=yes');
+             ref.addEventListener('loadstart', function(event) { alert('start: ' + event.url); });
+             ref.addEventListener('loadstop', function(event) { alert('stop: ' + event.url); });
+             ref.addEventListener('loaderror', function(event) { alert('error: ' + event.message); });
+             ref.addEventListener('exit', function(event) { alert(event.type); });
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
+
+# removeEventListener
+
+> Removes a listener for an event from the `InAppBrowser`.
+
+    ref.removeEventListener(eventname, callback);
+
+- __ref__: reference to the `InAppBrowser` window. _(InAppBrowser)_
+
+- __eventname__: the event to stop listening for. _(String)_
+
+  - __loadstart__: event fires when the `InAppBrowser` starts to load a URL.
+  - __loadstop__: event fires when the `InAppBrowser` finishes loading a URL.
+  - __loaderror__: event fires when the `InAppBrowser` encounters an error loading a URL.
+  - __exit__: event fires when the `InAppBrowser` window is closed.
+
+- __callback__: the function to execute when the event fires.
+The function is passed an `InAppBrowserEvent` object.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+    var myCallback = function() { alert(event.url); }
+    ref.addEventListener('loadstart', myCallback);
+    ref.removeEventListener('loadstart', myCallback);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>InAppBrowser.removeEventListener Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // Global InAppBrowser reference
+        var iabRef = null;
+
+        function iabLoadStart(event) {
+            alert(event.type + ' - ' + event.url);
+        }
+
+        function iabLoadStop(event) {
+            alert(event.type + ' - ' + event.url);
+        }
+
+        function iabLoadError(event) {
+            alert(event.type + ' - ' + event.message);
+        }
+
+        function iabClose(event) {
+             alert(event.type);
+             iabRef.removeEventListener('loadstart', iabLoadStart);
+             iabRef.removeEventListener('loadstop', iabLoadStop);
+             iabRef.removeEventListener('loaderror', iabLoadError);
+             iabRef.removeEventListener('exit', iabClose);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+             iabRef = window.open('http://apache.org', '_blank', 'location=yes');
+             iabRef.addEventListener('loadstart', iabLoadStart);
+             iabRef.addEventListener('loadstop', iabLoadStop);
+             iabRef.addEventListener('loaderror', iabLoadError);
+             iabRef.addEventListener('exit', iabClose);
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
+
+# close
+
+> Closes the `InAppBrowser` window.
+
+    ref.close();
+
+- __ref__: reference to the `InAppBrowser` window _(InAppBrowser)_
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+    ref.close();
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>InAppBrowser.close Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+             var ref = window.open('http://apache.org', '_blank', 'location=yes');
+             // close InAppBrowser after 5 seconds
+             setTimeout(function() {
+                 ref.close();
+             }, 5000);
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
+
+# show
+
+> Displays an InAppBrowser window that was opened hidden. Calling this has no effect if the InAppBrowser was already visible.
+
+    ref.show();
+
+- __ref__: reference to the InAppBrowser window (`InAppBrowser`)
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'hidden=yes');
+    ref.show();
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>InAppBrowser.show Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for Cordova to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // Cordova is ready
+        //
+        function onDeviceReady() {
+             var ref = window.open('http://apache.org', '_blank', 'hidden=yes');
+             ref.addEventListener('loadstop', function(event) {
+                 alert('background window loaded'); 
+             });
+             // close InAppBrowser after 5 seconds
+             setTimeout(function() {
+                 ref.close();
+             }, 5000);
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
+
+# executeScript
+
+> Injects JavaScript code into the `InAppBrowser` window
+
+    ref.executeScript(details, callback);
+
+- __ref__: reference to the `InAppBrowser` window. _(InAppBrowser)_
+
+- __injectDetails__: details of the script to run, specifying either a `file` or `code` key. _(Object)_
+  - __file__: URL of the script to inject.
+  - __code__: Text of the script to inject.
+
+- __callback__: the function that executes after the JavaScript code is injected.
+    - If the injected script is of type `code`, the callback executes
+      with a single parameter, which is the return value of the
+      script, wrapped in an `Array`. For multi-line scripts, this is
+      the return value of the last statement, or the last expression
+      evaluated.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+    ref.addEventListener('loadstop', function() {
+        ref.executeScript({file: "myscript.js"});
+    });
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>InAppBrowser.executeScript Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // Global InAppBrowser reference
+        var iabRef = null;
+
+        // Inject our custom JavaScript into the InAppBrowser window
+        //
+        function replaceHeaderImage() {
+            iabRef.executeScript({
+                code: "var img=document.querySelector('#header img'); img.src='http://cordova.apache.org/images/cordova_bot.png';"
+            }, function() {
+                alert("Image Element Successfully Hijacked");
+            });
+        }
+
+        function iabClose(event) {
+             iabRef.removeEventListener('loadstop', replaceHeaderImage);
+             iabRef.removeEventListener('exit', iabClose);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+             iabRef = window.open('http://apache.org', '_blank', 'location=yes');
+             iabRef.addEventListener('loadstop', replaceHeaderImage);
+             iabRef.addEventListener('exit', iabClose);
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
+
+# insertCSS
+
+> Injects CSS into the `InAppBrowser` window.
+
+    ref.insertCSS(details, callback);
+
+- __ref__: reference to the `InAppBrowser` window _(InAppBrowser)_
+
+- __injectDetails__: details of the script to run, specifying either a `file` or `code` key. _(Object)_
+  - __file__: URL of the stylesheet to inject.
+  - __code__: Text of the stylesheet to inject.
+
+- __callback__: the function that executes after the CSS is injected.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+    ref.addEventListener('loadstop', function() {
+        ref.insertCSS({file: "mystyles.css"});
+    });
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>InAppBrowser.insertCSS Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // Global InAppBrowser reference
+        var iabRef = null;
+
+        // Inject our custom CSS into the InAppBrowser window
+        //
+        function changeBackgroundColor() {
+            iabRef.insertCSS({
+                code: "body { background: #ffff00; }"
+            }, function() {
+                alert("Styles Altered");
+            });
+        }
+
+        function iabClose(event) {
+             iabRef.removeEventListener('loadstop', changeBackgroundColor);
+             iabRef.removeEventListener('exit', iabClose);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+             iabRef = window.open('http://apache.org', '_blank', 'location=yes');
+             iabRef.addEventListener('loadstop', changeBackgroundColor);
+             iabRef.addEventListener('exit', iabClose);
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
+
+# InAppBrowserEvent
+
+The object that is passed to the callback function from an
+`addEventListener` call on an `InAppBrowser` object.
+
+## Properties
+
+- __type__: the eventname, either `loadstart`, `loadstop`, `loaderror`, or `exit`. _(String)_
+
+- __url__: the URL that was loaded. _(String)_
+
+- __code__: the error code, only in the case of `loaderror`. _(Number)_
+
+- __message__: the error message, only in the case of `loaderror`. _(String)_
diff --git a/docs/en/3.3.0/cordova/inappbrowser/window.open.md b/docs/en/3.3.0/cordova/inappbrowser/window.open.md
new file mode 100644
index 0000000..16f40c3
--- /dev/null
+++ b/docs/en/3.3.0/cordova/inappbrowser/window.open.md
@@ -0,0 +1,103 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# window.open
+
+Opens a URL in a new `InAppBrowser` instance, the current browser
+instance, or the system browser.
+
+    var ref = window.open(url, target, options);
+
+- __ref__: Reference to the `InAppBrowser` window. _(InAppBrowser)_
+
+- __url__: The URL to load _(String)_. Call `encodeURI()` on this if the URL contains Unicode characters.
+
+- __target__: The target in which to load the URL, an optional parameter that defaults to `_self`. _(String)_
+
+    - `_self`: Opens in the Cordova WebView if the URL is in the white list, otherwise it opens in the `InAppBrowser`.
+    - `_blank`: Opens in the `InAppBrowser`.
+    - `_system`: Opens in the system's web browser.
+
+- __options__: Options for the `InAppBrowser`. Optional, defaulting to: `location=yes`. _(String)_
+
+    The `options` string must not contain any blank space, and each feature's name/value pairs must be separated by a comma. Feature names are case insensitive. All platforms support the value below:
+
+    - __location__: Set to `yes` or `no` to turn the `InAppBrowser`'s location bar on or off.
+    
+    Android only:
+
+    - __closebuttoncaption__: set to a string to use as the __Done__ button's caption.
+    - __hidden__: set to `yes` to create the browser and load the page, but not show it. The load event fires when loading is complete. Omit or set to `no` (default) to have the browser open and load normally. 
+    - __clearcache__: set to `yes` to have the browser's cookie cache cleared before the new window is opened
+    - __clearsessioncache__: set to `yes` to have the session cookie cache cleared before the new window is opened
+
+    iOS only:
+
+    - __closebuttoncaption__: set to a string to use as the __Done__ button's caption. Note that you need to localize this value yourself.
+    - __hidden__: set to `yes` to create the browser and load the page, but not show it. The load event fires when loading is complete. Omit or set to `no` (default) to have the browser open and load normally. 
+    - __toolbar__:  set to `yes` or `no` to turn the toolbar on or off for the InAppBrowser (defaults to `yes`)
+    - __enableViewportScale__:  Set to `yes` or `no` to prevent viewport scaling through a meta tag (defaults to `no`).
+    - __mediaPlaybackRequiresUserAction__: Set to `yes` or `no` to prevent HTML5 audio or video from autoplaying (defaults to `no`).
+    - __allowInlineMediaPlayback__: Set to `yes` or `no` to allow in-line HTML5 media playback, displaying within the browser window rather than a device-specific playback interface. The HTML's `video` element must also include the `webkit-playsinline` attribute (defaults to `no`)
+    - __keyboardDisplayRequiresUserAction__: Set to `yes` or `no` to open the keyboard when form elements receive focus via JavaScript's `focus()` call (defaults to `yes`).
+    - __suppressesIncrementalRendering__: Set to `yes` or `no` to wait until all new view content is received before being rendered (defaults to `no`).
+    - __presentationstyle__:  Set to `pagesheet`, `formsheet` or `fullscreen` to set the [presentation style](http://developer.apple.com/library/ios/documentation/UIKit/Reference/UIViewController_Class/Reference/Reference.html#//apple_ref/occ/instp/UIViewController/modalPresentationStyle) (defaults to `fullscreen`).
+    - __transitionstyle__: Set to `fliphorizontal`, `crossdissolve` or `coververtical` to set the [transition style](http://developer.apple.com/library/ios/#documentation/UIKit/Reference/UIViewController_Class/Reference/Reference.html#//apple_ref/occ/instp/UIViewController/modalTransitionStyle) (defaults to `coververtical`).
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    var ref = window.open('http://apache.org', '_blank', 'location=yes');
+    var ref2 = window.open(encodeURI('http://ja.m.wikipedia.org/wiki/ハングル'), '_blank', 'location=yes');
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>window.open Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // external url
+            var ref = window.open(encodeURI('http://apache.org'), '_blank', 'location=yes');
+            // relative document
+            ref = window.open('next.html', '_self');
+        }
+
+        </script>
+      </head>
+      <body>
+      </body>
+    </html>
diff --git a/docs/en/3.3.0/cordova/media/MediaError/mediaError.md b/docs/en/3.3.0/cordova/media/MediaError/mediaError.md
new file mode 100644
index 0000000..28ed43e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/MediaError/mediaError.md
@@ -0,0 +1,42 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# MediaError
+
+A `MediaError` object is returned to the `mediaError` callback
+function when an error occurs.
+
+## Properties
+
+- __code__: One of the predefined error codes listed below.
+
+- __message__: An error message describing the details of the error.
+
+## Constants
+
+- `MediaError.MEDIA_ERR_ABORTED`
+- `MediaError.MEDIA_ERR_NETWORK`
+- `MediaError.MEDIA_ERR_DECODE`
+- `MediaError.MEDIA_ERR_NONE_SUPPORTED`
+
+## Description
+
+The `MediaError` object is passed to a `mediaError` callback function
+when an error occurs.
+
diff --git a/docs/en/3.3.0/cordova/media/Parameters/mediaError.md b/docs/en/3.3.0/cordova/media/Parameters/mediaError.md
new file mode 100644
index 0000000..4113988
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/Parameters/mediaError.md
@@ -0,0 +1,31 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# mediaError
+
+A user-specified callback function that executes when there is an
+error in media functions.
+
+    function(error) {
+        // Handle the error
+    }
+
+## Parameters
+
+- __error__: The error returned by the device. _(MediaError)_
diff --git a/docs/en/3.3.0/cordova/media/capture/CaptureCB.md b/docs/en/3.3.0/cordova/media/capture/CaptureCB.md
new file mode 100644
index 0000000..c7b7bf5
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/CaptureCB.md
@@ -0,0 +1,44 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CaptureCB
+
+> Invoked upon a successful media capture operation.
+
+    function captureSuccess( MediaFile[] mediaFiles ) { ... };
+
+## Description
+
+This function executes after a successful capture operation completes.
+At this point a media file has been captured, and either the user has
+exited the media capture application, or the capture limit has been
+reached.
+
+Each `MediaFile` object describes a captured media file.
+
+## Quick Example
+
+    // capture callback
+    function captureSuccess(mediaFiles) {
+        var i, path, len;
+        for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+            path = mediaFiles[i].fullPath;
+            // do something interesting with the file
+        }
+    };
diff --git a/docs/en/3.3.0/cordova/media/capture/CaptureError.md b/docs/en/3.3.0/cordova/media/capture/CaptureError.md
new file mode 100644
index 0000000..0dbb700
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/CaptureError.md
@@ -0,0 +1,38 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CaptureError
+
+> Encapsulates the error code resulting from a failed media capture operation.
+
+## Properties
+
+- __code__: One of the pre-defined error codes listed below.
+
+## Constants
+
+- `CaptureError.CAPTURE_INTERNAL_ERR`: The camera or microphone failed to capture image or sound.
+
+- `CaptureError.CAPTURE_APPLICATION_BUSY`: The camera or audio capture application is currently serving another capture request.
+
+- `CaptureError.CAPTURE_INVALID_ARGUMENT`: Invalid use of the API (e.g., the value of `limit` is less than one).
+
+- `CaptureError.CAPTURE_NO_MEDIA_FILES`: The user exits the camera or audio capture application before capturing anything.
+
+- `CaptureError.CAPTURE_NOT_SUPPORTED`: The requested capture operation is not supported.
diff --git a/docs/en/3.3.0/cordova/media/capture/CaptureErrorCB.md b/docs/en/3.3.0/cordova/media/capture/CaptureErrorCB.md
new file mode 100644
index 0000000..9c2a665
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/CaptureErrorCB.md
@@ -0,0 +1,41 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CaptureErrorCB
+
+> Invoked if an error occurs during a media capture operation.
+
+    function captureError( CaptureError error ) { ... };
+
+## Description
+
+This function executes if an error occurs when trying to launch a
+media capture operation. Failure scenarios include when the capture
+application is busy, a capture operation is already taking place, or
+the user cancels the operation before any media files are captured.
+
+This function executes with a `CaptureError` object containing an
+appropriate error `code`.
+
+## Quick Example
+
+    // capture error callback
+    var captureError = function(error) {
+        navigator.notification.alert('Error code: ' + error.code, null, 'Capture Error');
+    };
diff --git a/docs/en/3.3.0/cordova/media/capture/ConfigurationData.md b/docs/en/3.3.0/cordova/media/capture/ConfigurationData.md
new file mode 100644
index 0000000..0cd13b8
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/ConfigurationData.md
@@ -0,0 +1,61 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# ConfigurationData
+
+> Encapsulates a set of media capture parameters that a device supports.
+
+## Description
+
+Describes media capture modes supported by the device.  The
+configuration data includes the MIME type, and capture dimensions for
+video or image capture.
+
+The MIME types should adhere to [RFC2046](http://www.ietf.org/rfc/rfc2046.txt).  Examples:
+
+- `video/3gpp`
+- `video/quicktime`
+- `image/jpeg`
+- `audio/amr`
+- `audio/wav`
+
+## Properties
+
+- __type__: The ASCII-encoded lowercase string representing the media type. (DOMString)
+
+- __height__: The height of the image or video in pixels.  The value is zero for sound clips. (Number)
+
+- __width__: The width of the image or video in pixels.  The value is zero for sound clips. (Number)
+
+## Quick Example
+
+    // retrieve supported image modes
+    var imageModes = navigator.device.capture.supportedImageModes;
+
+    // Select mode that has the highest horizontal resolution
+    var width = 0;
+    var selectedmode;
+    for each (var mode in imageModes) {
+        if (mode.width > width) {
+            width = mode.width;
+            selectedmode = mode;
+        }
+    }
+
+Not supported by any platform.  All configuration data arrays are empty.
diff --git a/docs/en/3.3.0/cordova/media/capture/MediaFile.getFormatData.md b/docs/en/3.3.0/cordova/media/capture/MediaFile.getFormatData.md
new file mode 100644
index 0000000..4f3d444
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/MediaFile.getFormatData.md
@@ -0,0 +1,64 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# MediaFile.getFormatData
+
+> Retrieves format information about the media capture file.
+
+    mediaFile.getFormatData(
+        MediaFileDataSuccessCB successCallback,
+        [MediaFileDataErrorCB errorCallback]
+    );
+
+## Description
+
+This function asynchronously attempts to retrieve the format
+information for the media file.  If successful, it invokes the
+`MediaFileDataSuccessCB` callback with a `MediaFileData` object.  If
+the attempt fails, this function invokes the `MediaFileDataErrorCB`
+callback.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Amazon Fire OS Quirks
+
+The API to access media file format information is limited, so not all
+`MediaFileData` properties are supported.
+
+## BlackBerry 10 Quirks
+
+Does not provide an API for information about media files, so all
+`MediaFileData` objects return with default values.
+
+## Android Quirks
+
+The API to access media file format information is limited, so not all
+`MediaFileData` properties are supported.
+
+## iOS Quirks
+
+The API to access media file format information is limited, so not all
+`MediaFileData` properties are supported.
diff --git a/docs/en/3.3.0/cordova/media/capture/MediaFile.md b/docs/en/3.3.0/cordova/media/capture/MediaFile.md
new file mode 100644
index 0000000..f0ac93a
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/MediaFile.md
@@ -0,0 +1,38 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# MediaFile
+
+> Encapsulates properties of a media capture file.
+
+## Properties
+
+- __name__: The name of the file, without path information. (DOMString)
+
+- __fullPath__: The full path of the file, including the name. (DOMString)
+
+- __type__: The file's mime type (DOMString)
+
+- __lastModifiedDate__: The date and time when the file was last modified. (Date)
+
+- __size__: The size of the file, in bytes. (Number)
+
+## Methods
+
+- __MediaFile.getFormatData__: Retrieves the format information of the media file.
diff --git a/docs/en/3.3.0/cordova/media/capture/MediaFileData.md b/docs/en/3.3.0/cordova/media/capture/MediaFileData.md
new file mode 100644
index 0000000..54addfb
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/MediaFileData.md
@@ -0,0 +1,92 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# MediaFileData
+
+> Encapsulates format information about a media file.
+
+## Properties
+
+- __codecs__: The actual format of the audio and video content. (DOMString)
+
+- __bitrate__: The average bitrate of the content.  The value is zero for images. (Number)
+
+- __height__: The height of the image or video in pixels. The value is zero for audio clips. (Number)
+
+- __width__: The width of the image or video in pixels. The value is zero for audio clips. (Number)
+
+- __duration__: The length of the video or sound clip in seconds. The value is zero for images. (Number)
+
+## BlackBerry 10 Quirks
+
+No API provides format information for media files, so the
+`MediaFileData` object returned by `MediaFile.getFormatData` features
+the following default values:
+
+- __codecs__: Not supported, and returns `null`.
+
+- __bitrate__: Not supported, and returns zero.
+
+- __height__: Not supported, and returns zero.
+
+- __width__: Not supported, and returns zero.
+
+- __duration__: Not supported, and returns zero.
+
+## Amazon Fire OS Quirks
+
+Supports the following `MediaFileData` properties:
+
+- __codecs__: Not supported, and returns `null`.
+
+- __bitrate__: Not supported, and returns zero.
+
+- __height__: Supported: image and video files only.
+
+- __width__: Supported: image and video files only.
+
+- __duration__: Supported: audio and video files only
+
+## Android Quirks
+
+Supports the following `MediaFileData` properties:
+
+- __codecs__: Not supported, and returns `null`.
+
+- __bitrate__: Not supported, and returns zero.
+
+- __height__: Supported: image and video files only.
+
+- __width__: Supported: image and video files only.
+
+- __duration__: Supported: audio and video files only.
+
+## iOS Quirks
+
+Supports the following `MediaFileData` properties:
+
+- __codecs__: Not supported, and returns `null`.
+
+- __bitrate__: Supported on iOS4 devices for audio only. Returns zero for images and videos.
+
+- __height__: Supported: image and video files only.
+
+- __width__: Supported: image and video files only.
+
+- __duration__: Supported: audio and video files only.
diff --git a/docs/en/3.3.0/cordova/media/capture/capture.md b/docs/en/3.3.0/cordova/media/capture/capture.md
new file mode 100644
index 0000000..a76209d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/capture.md
@@ -0,0 +1,164 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Capture
+
+> Provides access to the device's audio, image, and video capture capabilities.
+
+__WARNING__: Collection and use of images, video, or
+audio from the device's camera or microphone raises important privacy
+issues.  Your app's privacy policy should discuss how the app uses
+such sensors and whether the data recorded is shared with any other
+parties.  In addition, if the app's use of the camera or microphone is
+not apparent in the user interface, you should provide a just-in-time
+notice before the app accesses the camera or microphone (if the
+device operating system doesn't do so already). That notice should
+provide the same information noted above, as well as obtaining the
+user's permission (e.g., by presenting choices for __OK__ and __No
+Thanks__).  Note that some app marketplaces may require your app to
+provide just-in-time notice and obtain permission from the user prior
+to accessing the camera or microphone.  For more information, please
+see the Privacy Guide.
+
+## Objects
+
+- Capture
+- CaptureAudioOptions
+- CaptureImageOptions
+- CaptureVideoOptions
+- CaptureCallback
+- CaptureErrorCB
+- ConfigurationData
+- MediaFile
+- MediaFileData
+
+## Methods
+
+- capture.captureAudio
+- capture.captureImage
+- capture.captureVideo
+- MediaFile.getFormatData
+
+## Scope
+
+The `capture` object is assigned to the `navigator.device` object, and
+therefore has global scope.
+
+    // The global capture object
+    var capture = navigator.device.capture;
+
+## Properties
+
+- __supportedAudioModes__: The audio recording formats supported by the device. (ConfigurationData[])
+
+- __supportedImageModes__: The recording image sizes and formats supported by the device. (ConfigurationData[])
+
+- __supportedVideoModes__: The recording video resolutions and formats supported by the device. (ConfigurationData[])
+
+## Methods
+
+- `capture.captureAudio`: Launch the device's audio recording application to record audio clips.
+
+- `capture.captureImage`: Launch the device's camera application to take photos.
+
+- `capture.captureVideo`: Launch the device's video recorder application to record videos.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.media-capture
+        $ cordova plugin ls
+        [ 'org.apache.cordova.file',
+          'org.apache.cordova.media-capture']
+        $ cordova plugin rm org.apache.cordova.media-capture
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="File">
+            <param name="android-package" value="org.apache.cordova.file.FileUtils" />
+        </feature>
+        <feature name="Capture">
+            <param name="android-package" value="org.apache.cordova.mediacapture.Capture" />
+        </feature>
+
+        (in app/AndroidManifest.xml)   
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+        <uses-permission android:name="android.permission.RECORD_AUDIO" />
+        <uses-permission android:name="android.permission.RECORD_VIDEO" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="File">
+            <param name="android-package" value="org.apache.cordova.file.FileUtils" />
+        </feature>
+        <feature name="Capture">
+            <param name="android-package" value="org.apache.cordova.mediacapture.Capture" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+        <uses-permission android:name="android.permission.RECORD_AUDIO" />
+        <uses-permission android:name="android.permission.RECORD_VIDEO" />
+
+* BlackBerry 10
+
+        (in www/plugins.xml)
+        <feature name="Capture">
+            <param name="blackberry-package" value="org.apache.cordova.capture.MediaCapture" />
+        </feature>
+
+        (in www/config.xml)
+        <feature id="blackberry.system"  required="true" version="1.0.0.0" />
+        <feature id="blackberry.io.file" required="true" version="1.0.0.0" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Capture">
+            <param name="ios-package" value="CDVCapture" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_MEDIALIB" />
+            <Capability Name="ID_CAP_MICROPHONE" />
+            <Capability Name="ID_HW_FRONTCAMERA" />
+            <Capability Name="ID_CAP_ISV_CAMERA" />
+            <Capability Name="ID_CAP_CAMERA" />
+        </Capabilities>
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/media/capture/captureAudio.md b/docs/en/3.3.0/cordova/media/capture/captureAudio.md
new file mode 100644
index 0000000..9e4f3c4
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/captureAudio.md
@@ -0,0 +1,145 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# capture.captureAudio
+
+> Start the audio recorder application and return information about captured audio clip files.
+
+    navigator.device.capture.captureAudio(
+        CaptureCB captureSuccess, CaptureErrorCB captureError,  [CaptureAudioOptions options]
+    );
+
+## Description
+
+Starts an asynchronous operation to capture audio recordings using the
+device's default audio recording application.  The operation allows
+the device user to capture multiple recordings in a single session.
+
+The capture operation ends when either the user exits the audio
+recording application, or the maximum number of recordings specified
+by `CaptureAudioOptions.limit` is reached.  If no `limit` parameter
+value is specified, it defaults to one (1), and the capture operation
+terminates after the user records a single audio clip.
+
+When the capture operation finishes, the `CaptureCallback` executes
+with an array of `MediaFile` objects describing each captured audio
+clip file.  If the user terminates the operation before an audio clip
+is captured, the `CaptureErrorCallback` executes with a `CaptureError`
+object, featuring the `CaptureError.CAPTURE_NO_MEDIA_FILES` error
+code.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // capture callback
+    var captureSuccess = function(mediaFiles) {
+        var i, path, len;
+        for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+            path = mediaFiles[i].fullPath;
+            // do something interesting with the file
+        }
+    };
+
+    // capture error callback
+    var captureError = function(error) {
+        navigator.notification.alert('Error code: ' + error.code, null, 'Capture Error');
+    };
+
+    // start audio capture
+    navigator.device.capture.captureAudio(captureSuccess, captureError, {limit:2});
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Capture Audio</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8" src="json2.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Called when capture operation is finished
+        //
+        function captureSuccess(mediaFiles) {
+            var i, len;
+            for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+                uploadFile(mediaFiles[i]);
+            }
+        }
+
+        // Called if something bad happens.
+        //
+        function captureError(error) {
+            var msg = 'An error occurred during capture: ' + error.code;
+            navigator.notification.alert(msg, null, 'Uh oh!');
+        }
+
+        // A button will call this function
+        //
+        function captureAudio() {
+            // Launch device audio recording application,
+            // allowing user to capture up to 2 audio clips
+            navigator.device.capture.captureAudio(captureSuccess, captureError, {limit: 2});
+        }
+
+        // Upload files to server
+        function uploadFile(mediaFile) {
+            var ft = new FileTransfer(),
+                path = mediaFile.fullPath,
+                name = mediaFile.name;
+
+            ft.upload(path,
+                "http://my.domain.com/upload.php",
+                function(result) {
+                    console.log('Upload success: ' + result.responseCode);
+                    console.log(result.bytesSent + ' bytes sent');
+                },
+                function(error) {
+                    console.log('Error uploading file ' + path + ': ' + error.code);
+                },
+                { fileName: name });
+        }
+
+        </script>
+        </head>
+        <body>
+            <button onclick="captureAudio();">Capture Audio</button> <br>
+        </body>
+    </html>
+
+## BlackBerry 10 Quirks
+
+- Cordova for BlackBerry 10 attempts to launch the __Voice Notes Recorder__ application, provided by RIM, to capture audio recordings. The app receives a `CaptureError.CAPTURE_NOT_SUPPORTED` error code if the application is not installed on the device.
+
+## iOS Quirks
+
+- iOS does not have a default audio recording application, so a simple user interface is provided.
+
+## Windows Phone 7 and 8 Quirks
+
+- Windows Phone 7 does not have a default audio recording application, so a simple user interface is provided.
diff --git a/docs/en/3.3.0/cordova/media/capture/captureAudioOptions.md b/docs/en/3.3.0/cordova/media/capture/captureAudioOptions.md
new file mode 100644
index 0000000..daf3459
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/captureAudioOptions.md
@@ -0,0 +1,51 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CaptureAudioOptions
+
+> Encapsulates audio capture configuration options.
+
+## Properties
+
+- __limit__: The maximum number of audio clips the device user can record in a single capture operation.  The value must be greater than or equal to 1 (defaults to 1).
+
+- __duration__: The maximum duration of an audio sound clip, in seconds.
+
+## Quick Example
+
+    // limit capture operation to 3 media files, no longer than 10 seconds each
+    var options = { limit: 3, duration: 10 };
+
+    navigator.device.capture.captureAudio(captureSuccess, captureError, options);
+
+## Amazon Fire OS Quirks
+
+- The `duration` parameter is not supported.  Recording lengths cannot be limited programmatically.
+
+## Android Quirks
+
+- The `duration` parameter is not supported.  Recording lengths can't be limited programmatically.
+
+## BlackBerry 10 Quirks
+
+- The `duration` parameter is not supported.  Recording lengths can't be limited programmatically.
+
+## iOS Quirks
+
+- The `limit` parameter is not supported, so only one recording can be created for each invocation.
diff --git a/docs/en/3.3.0/cordova/media/capture/captureImage.md b/docs/en/3.3.0/cordova/media/capture/captureImage.md
new file mode 100644
index 0000000..d7660c4
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/captureImage.md
@@ -0,0 +1,138 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# capture.captureImage
+
+> Start the camera application and return information about captured image files.
+
+    navigator.device.capture.captureImage(
+        CaptureCB captureSuccess, CaptureErrorCB captureError, [CaptureImageOptions options]
+    );
+
+## Description
+
+Starts an asynchronous operation to capture images using the device's
+camera application.  The operation allows users to capture more than
+one image in a single session.
+
+The capture operation ends either when the user closes the camera
+application, or the maximum number of recordings specified by
+`CaptureAudioOptions.limit` is reached.  If no `limit` value is
+specified, it defaults to one (1), and the capture operation
+terminates after the user captures a single image.
+
+When the capture operation finishes, it invokes the `CaptureCB`
+callback with an array of `MediaFile` objects describing each captured
+image file.  If the user terminates the operation before capturing an
+image, the `CaptureErrorCB` callback executes with a `CaptureError`
+object featuring a `CaptureError.CAPTURE_NO_MEDIA_FILES` error code.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Windows Phone 7 Quirks
+
+Invoking the native camera application while your device is connected
+via Zune does not work, and the error callback executes.
+
+## Quick Example
+
+    // capture callback
+    var captureSuccess = function(mediaFiles) {
+        var i, path, len;
+        for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+            path = mediaFiles[i].fullPath;
+            // do something interesting with the file
+        }
+    };
+
+    // capture error callback
+    var captureError = function(error) {
+        navigator.notification.alert('Error code: ' + error.code, null, 'Capture Error');
+    };
+
+    // start image capture
+    navigator.device.capture.captureImage(captureSuccess, captureError, {limit:2});
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Capture Image</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8" src="json2.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Called when capture operation is finished
+        //
+        function captureSuccess(mediaFiles) {
+            var i, len;
+            for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+                uploadFile(mediaFiles[i]);
+            }
+        }
+
+        // Called if something bad happens.
+        //
+        function captureError(error) {
+            var msg = 'An error occurred during capture: ' + error.code;
+            navigator.notification.alert(msg, null, 'Uh oh!');
+        }
+
+        // A button will call this function
+        //
+        function captureImage() {
+            // Launch device camera application,
+            // allowing user to capture up to 2 images
+            navigator.device.capture.captureImage(captureSuccess, captureError, {limit: 2});
+        }
+
+        // Upload files to server
+        function uploadFile(mediaFile) {
+            var ft = new FileTransfer(),
+                path = mediaFile.fullPath,
+                name = mediaFile.name;
+
+            ft.upload(path,
+                "http://my.domain.com/upload.php",
+                function(result) {
+                    console.log('Upload success: ' + result.responseCode);
+                    console.log(result.bytesSent + ' bytes sent');
+                },
+                function(error) {
+                    console.log('Error uploading file ' + path + ': ' + error.code);
+                },
+                { fileName: name });
+        }
+
+        </script>
+        </head>
+        <body>
+            <button onclick="captureImage();">Capture Image</button> <br>
+        </body>
+    </html>
+
diff --git a/docs/en/3.3.0/cordova/media/capture/captureImageOptions.md b/docs/en/3.3.0/cordova/media/capture/captureImageOptions.md
new file mode 100644
index 0000000..33d1144
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/captureImageOptions.md
@@ -0,0 +1,37 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CaptureImageOptions
+
+> Encapsulates image capture configuration options.
+
+## Properties
+
+- __limit__: The maximum number of images the user can capture in a single capture operation. The value must be greater than or equal to 1 (defaults to 1).
+
+## Quick Example
+
+    // limit capture operation to 3 images
+    var options = { limit: 3 };
+
+    navigator.device.capture.captureImage(captureSuccess, captureError, options);
+
+## iOS Quirks
+
+- The __limit__ parameter is not supported, and only one image is taken per invocation.
diff --git a/docs/en/3.3.0/cordova/media/capture/captureVideo.md b/docs/en/3.3.0/cordova/media/capture/captureVideo.md
new file mode 100644
index 0000000..f9bf412
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/captureVideo.md
@@ -0,0 +1,138 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# capture.captureVideo
+
+> Start the video recorder application and return information about captured video clip files.
+
+    navigator.device.capture.captureVideo(
+        CaptureCB captureSuccess, CaptureErrorCB captureError, [CaptureVideoOptions options]
+    );
+
+## Description
+
+Starts an asynchronous operation to capture video recordings using the
+device's video recording application.  The operation allows the user
+to capture more than one recordings in a single session.
+
+The capture operation ends when either the user exits the video
+recording application, or the maximum number of recordings specified
+by `CaptureVideoOptions.limit` is reached.  If no `limit` parameter
+value is specified, it defaults to one (1), and the capture operation
+terminates after the user records a single video clip.
+
+When the capture operation finishes, it the `CaptureCB` callback
+executes with an array of `MediaFile` objects describing each captured
+video clip file.  If the user terminates the operation before
+capturing a video clip, the `CaptureErrorCB` callback executes with a
+`CaptureError` object featuring a
+`CaptureError.CAPTURE_NO_MEDIA_FILES` error code.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // capture callback
+    var captureSuccess = function(mediaFiles) {
+        var i, path, len;
+        for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+            path = mediaFiles[i].fullPath;
+            // do something interesting with the file
+        }
+    };
+
+    // capture error callback
+    var captureError = function(error) {
+        navigator.notification.alert('Error code: ' + error.code, null, 'Capture Error');
+    };
+
+    // start video capture
+    navigator.device.capture.captureVideo(captureSuccess, captureError, {limit:2});
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Capture Video</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8" src="json2.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Called when capture operation is finished
+        //
+        function captureSuccess(mediaFiles) {
+            var i, len;
+            for (i = 0, len = mediaFiles.length; i < len; i += 1) {
+                uploadFile(mediaFiles[i]);
+            }
+        }
+
+        // Called if something bad happens.
+        //
+        function captureError(error) {
+            var msg = 'An error occurred during capture: ' + error.code;
+            navigator.notification.alert(msg, null, 'Uh oh!');
+        }
+
+        // A button will call this function
+        //
+        function captureVideo() {
+            // Launch device video recording application,
+            // allowing user to capture up to 2 video clips
+            navigator.device.capture.captureVideo(captureSuccess, captureError, {limit: 2});
+        }
+
+        // Upload files to server
+        function uploadFile(mediaFile) {
+            var ft = new FileTransfer(),
+                path = mediaFile.fullPath,
+                name = mediaFile.name;
+
+            ft.upload(path,
+                "http://my.domain.com/upload.php",
+                function(result) {
+                    console.log('Upload success: ' + result.responseCode);
+                    console.log(result.bytesSent + ' bytes sent');
+                },
+                function(error) {
+                    console.log('Error uploading file ' + path + ': ' + error.code);
+                },
+                { fileName: name });
+        }
+
+        </script>
+        </head>
+        <body>
+            <button onclick="captureVideo();">Capture Video</button> <br>
+        </body>
+    </html>
+
+## BlackBerry 10 Quirks
+
+- Cordova for BlackBerry 10 attempts to launch the __Video Recorder__ application, provided by RIM, to capture video recordings. The app receives a `CaptureError.CAPTURE_NOT_SUPPORTED` error code if the application is not installed on the device.
+
diff --git a/docs/en/3.3.0/cordova/media/capture/captureVideoOptions.md b/docs/en/3.3.0/cordova/media/capture/captureVideoOptions.md
new file mode 100644
index 0000000..920a469
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/capture/captureVideoOptions.md
@@ -0,0 +1,44 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# CaptureVideoOptions
+
+> Encapsulates video capture configuration options.
+
+## Properties
+
+- __limit__: The maximum number of video clips the device's user can capture in a single capture operation.  The value must be greater than or equal to 1 (defaults to 1).
+
+- __duration__: The maximum duration of a video clip, in seconds.
+
+## Quick Example
+
+    // limit capture operation to 3 video clips
+    var options = { limit: 3 };
+
+    navigator.device.capture.captureVideo(captureSuccess, captureError, options);
+
+## BlackBerry 10 Quirks
+
+- The __duration__ parameter is not supported, so the length of recordings can't be limited programmatically.
+
+## iOS Quirks
+
+- The __limit__ parameter is not supported.  Only one video is recorded per invocation.
+
diff --git a/docs/en/3.3.0/cordova/media/media.getCurrentPosition.md b/docs/en/3.3.0/cordova/media/media.getCurrentPosition.md
new file mode 100644
index 0000000..24b23dd
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.getCurrentPosition.md
@@ -0,0 +1,176 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.getCurrentPosition
+
+Returns the current position within an audio file.
+
+    media.getCurrentPosition(mediaSuccess, [mediaError]);
+
+## Parameters
+
+- __mediaSuccess__: The callback that is passed the current position in seconds.
+
+- __mediaError__: (Optional) The callback to execute if an error occurs.
+
+## Description
+
+An asynchronous function that returns the current position of the
+underlying audio file of a `Media` object. Also updates the `Media`
+object's `position` parameter.
+
+## Supported Platforms
+
+- Android
+
+- BlackBerry 10
+
+- iOS
+
+- Windows Phone 7 and 8
+
+- Tizen
+
+- Windows 8
+
+## Quick Example
+
+    // Audio player
+    //
+    var my_media = new Media(src, onSuccess, onError);
+
+    // Update media position every second
+    var mediaTimer = setInterval(function () {
+        // get media position
+        my_media.getCurrentPosition(
+            // success callback
+            function (position) {
+                if (position > -1) {
+                    console.log((position) + " sec");
+                }
+            },
+            // error callback
+            function (e) {
+                console.log("Error getting pos=" + e);
+            }
+        );
+    }, 1000);
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                      "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Pause audio
+            //
+            function pauseAudio() {
+                if (my_media) {
+                    my_media.pause();
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="pauseAudio();">Pause Playing Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
diff --git a/docs/en/3.3.0/cordova/media/media.getDuration.md b/docs/en/3.3.0/cordova/media/media.getDuration.md
new file mode 100644
index 0000000..50832db
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.getDuration.md
@@ -0,0 +1,162 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.getDuration
+
+Returns the duration of an audio file.
+
+    media.getDuration();
+
+## Description
+
+The `media.getDuration` method executes synchronously, returning the
+duration of the audio file in seconds, if known.  If the duration is
+unknown, it returns a value of -1.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    // Audio player
+    //
+    var my_media = new Media(src, onSuccess, onError);
+
+    // Get duration
+    var counter = 0;
+    var timerDur = setInterval(function() {
+        counter = counter + 100;
+        if (counter > 2000) {
+            clearInterval(timerDur);
+        }
+        var dur = my_media.getDuration();
+        if (dur > 0) {
+            clearInterval(timerDur);
+            document.getElementById('audio_duration').innerHTML = (dur) + " sec";
+        }
+    }, 100);
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Pause audio
+            //
+            function pauseAudio() {
+                if (my_media) {
+                    my_media.pause();
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="pauseAudio();">Pause Playing Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
diff --git a/docs/en/3.3.0/cordova/media/media.md b/docs/en/3.3.0/cordova/media/media.md
new file mode 100644
index 0000000..01f2239
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.md
@@ -0,0 +1,161 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Media
+
+> The `Media` object provides the ability to record and play back audio files on a device.
+
+    var media = new Media(src, mediaSuccess, [mediaError], [mediaStatus]);
+
+__NOTE__: The current implementation does not adhere to a W3C
+specification for media capture, and is provided for convenience only.
+A future implementation will adhere to the latest W3C specification
+and may deprecate the current APIs.
+
+## Parameters
+
+- __src__: A URI containing the audio content. _(DOMString)_
+
+- __mediaSuccess__: (Optional) The callback that executes after a `Media` object has completed the current play, record, or stop action. _(Function)_
+
+- __mediaError__: (Optional) The callback that executes if an error occurs. _(Function)_
+
+- __mediaStatus__: (Optional) The callback that executes to indicate status changes. _(Function)_
+
+## Constants
+
+The following constants are reported as the only parameter to the
+`mediaStatus` callback:
+
+- `Media.MEDIA_NONE`     = 0;
+- `Media.MEDIA_STARTING` = 1;
+- `Media.MEDIA_RUNNING`  = 2;
+- `Media.MEDIA_PAUSED`   = 3;
+- `Media.MEDIA_STOPPED`  = 4;
+
+## Methods
+
+- `media.getCurrentPosition`: Returns the current position within an audio file.
+
+- `media.getDuration`: Returns the duration of an audio file.
+
+- `media.play`: Start or resume playing an audio file.
+
+- `media.pause`: Pause playback of an audio file.
+
+- `media.release`: Releases the underlying operating system's audio resources.
+
+- `media.seekTo`: Moves the position within the audio file.
+
+- `media.setVolume`: Set the volume for audio playback.
+
+- `media.startRecord`: Start recording an audio file.
+
+- `media.stopRecord`: Stop recording an audio file.
+
+- `media.stop`: Stop playing an audio file.
+
+## Additional ReadOnly Parameters
+
+- __position__: The position within the audio playback, in seconds.
+    - Not automatically updated during play; call `getCurrentPosition` to update.
+
+- __duration__: The duration of the media, in seconds.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7.5
+- Tizen
+- Windows 8
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.media 
+        $ cordova plugin ls
+        [ 'org.apache.cordova.media' ]
+        $ cordova plugin rm org.apache.cordova.media 
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Media">
+            <param name="android-package" value="org.apache.cordova.media.AudioHandler" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.RECORD_AUDIO" />
+        <uses-permission android:name="android.permission.MODIFY_AUDIO_SETTINGS" />
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Media">
+            <param name="android-package" value="org.apache.cordova.media.AudioHandler" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.RECORD_AUDIO" />
+        <uses-permission android:name="android.permission.MODIFY_AUDIO_SETTINGS" />
+        <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="Media" value="Media" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Media">
+            <param name="ios-package" value="CDVSound" />
+        </feature>
+
+* Windows Phone (in `Properties/WPAppManifest.xml`)
+
+        <Capabilities>
+            <Capability Name="ID_CAP_MEDIALIB" />
+            <Capability Name="ID_CAP_MICROPHONE" />
+            <Capability Name="ID_HW_FRONTCAMERA" />
+            <Capability Name="ID_CAP_ISV_CAMERA" />
+            <Capability Name="ID_CAP_CAMERA" />
+        </Capabilities>
+
+  Reference: [Application Manifest for Windows Phone](http://msdn.microsoft.com/en-us/library/ff769509%28v=vs.92%29.aspx)
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
+
+## Windows Phone Quirks
+
+- Only one media file can be played back at a time.
+
+- There are strict restrictions on how your application interacts with other media. See the [Microsoft documentation for details][url].
+
+[url]: http://msdn.microsoft.com/en-us/library/windowsphone/develop/hh184838(v=vs.92).aspx
diff --git a/docs/en/3.3.0/cordova/media/media.pause.md b/docs/en/3.3.0/cordova/media/media.pause.md
new file mode 100644
index 0000000..aa1c7fe
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.pause.md
@@ -0,0 +1,162 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.pause
+
+Pauses playing an audio file.
+
+    media.pause();
+
+## Description
+
+The `media.pause` method executes synchronously, and pauses playing an audio file.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    // Play audio
+    //
+    function playAudio(url) {
+        // Play the audio file at url
+        var my_media = new Media(url,
+            // success callback
+            function () { console.log("playAudio():Audio Success"); },
+            // error callback
+            function (err) { console.log("playAudio():Audio Error: " + err); }
+        );
+
+        // Play audio
+        my_media.play();
+
+        // Pause after 10 seconds
+        setTimeout(function () {
+            media.pause();
+        }, 10000);
+    }
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Pause audio
+            //
+            function pauseAudio() {
+                if (my_media) {
+                    my_media.pause();
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="pauseAudio();">Pause Playing Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
diff --git a/docs/en/3.3.0/cordova/media/media.play.md b/docs/en/3.3.0/cordova/media/media.play.md
new file mode 100644
index 0000000..4815263
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.play.md
@@ -0,0 +1,185 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.play
+
+Starts or resumes playing an audio file.
+
+    media.play();
+
+## Description
+
+The `media.play` method executes synchronously, and starts or resumes
+playing an audio file.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    // Play audio
+    //
+    function playAudio(url) {
+        // Play the audio file at url
+        var my_media = new Media(url,
+            // success callback
+            function () {
+                console.log("playAudio():Audio Success");
+            },
+            // error callback
+            function (err) {
+                console.log("playAudio():Audio Error: " + err);
+            }
+        );
+        // Play audio
+        my_media.play();
+    }
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                if (my_media == null) {
+                    // Create Media object from src
+                    my_media = new Media(src, onSuccess, onError);
+                } // else play current audio
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Pause audio
+            //
+            function pauseAudio() {
+                if (my_media) {
+                    my_media.pause();
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="pauseAudio();">Pause Playing Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
+
+## iOS Quirks
+
+- __numberOfLoops__: Pass this option to the `play` method to specify
+  the number of times you want the media file to play, e.g.:
+
+        var myMedia = new Media("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3")
+        myMedia.play({ numberOfLoops: 2 })
+
+- __playAudioWhenScreenIsLocked__: Pass in this option to the `play`
+  method to specify whether you want to allow playback when the screen
+  is locked.  If set to `true` (the default value), the state of the
+  hardware mute button is ignored, e.g.:
+
+        var myMedia = new Media("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3")
+        myMedia.play({ playAudioWhenScreenIsLocked : false })
+
+- __order of file search__: When only a file name or simple path is
+  provided, iOS searches in the `www` directory for the file, then in
+  the application's `documents/tmp` directory:
+
+        var myMedia = new Media("audio/beer.mp3")
+        myMedia.play()  // first looks for file in www/audio/beer.mp3 then in <application>/documents/tmp/audio/beer.mp3
diff --git a/docs/en/3.3.0/cordova/media/media.release.md b/docs/en/3.3.0/cordova/media/media.release.md
new file mode 100644
index 0000000..e06d0a1
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.release.md
@@ -0,0 +1,154 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.release
+
+Releases the underlying operating system's audio resources.
+
+    media.release();
+
+## Description
+
+The `media.release` method executes synchronously, releasing the
+underlying operating system's audio resources.  This is particularly
+important for Android, since there are a finite amount of OpenCore
+instances for media playback. Applications should call the `release`
+function for any `Media` resource that is no longer needed.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    // Audio player
+    //
+    var my_media = new Media(src, onSuccess, onError);
+
+    my_media.play();
+    my_media.stop();
+    my_media.release();
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Pause audio
+            //
+            function pauseAudio() {
+                if (my_media) {
+                    my_media.pause();
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="pauseAudio();">Pause Playing Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
diff --git a/docs/en/3.3.0/cordova/media/media.seekTo.md b/docs/en/3.3.0/cordova/media/media.seekTo.md
new file mode 100644
index 0000000..23fc574
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.seekTo.md
@@ -0,0 +1,154 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.seekTo
+
+Sets the current position within an audio file.
+
+    media.seekTo(milliseconds);
+
+## Parameters
+
+- __milliseconds__: The position to set the playback position within the audio, in milliseconds.
+
+## Description
+
+The `media.seekTo` executes asynchronously, updating the current
+playback position within an audio file referenced by a `Media`
+object. Also updates the `Media` object's `position` parameter.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10 (OS 6.0 and higher)
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    // Audio player
+    //
+    var my_media = new Media(src, onSuccess, onError);
+        my_media.play();
+    // SeekTo to 10 seconds after 5 seconds
+    setTimeout(function() {
+        my_media.seekTo(10000);
+    }, 5000);
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" 
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update media position every second
+                mediaTimer = setInterval(function() {
+                    // get media position
+                    my_media.getCurrentPosition(
+                        // success callback
+                        function(position) {
+                            if (position > -1) {
+                                setAudioPosition(position + " sec");
+                            }
+                        },
+                        // error callback
+                        function(e) {
+                            console.log("Error getting pos=" + e);
+                        }
+                    );
+                }, 1000);
+
+                // SeekTo to 10 seconds after 5 seconds
+                setTimeout(function() {
+                    my_media.seekTo(10000);
+                }, 5000);
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
+
+## BlackBerry 10 Quirks
+
+- Not supported on BlackBerry OS 5 devices.
diff --git a/docs/en/3.3.0/cordova/media/media.setVolume.md b/docs/en/3.3.0/cordova/media/media.setVolume.md
new file mode 100644
index 0000000..403858e
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.setVolume.md
@@ -0,0 +1,171 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.setVolume
+
+Set the volume for an audio file.
+
+    media.setVolume(volume);
+
+## Parameters
+
+- __volume__: The volume to set for playback.  The value must be within the range of 0.0 to 1.0.
+
+## Description
+
+Function `media.setVolume` is an asynchronous function that sets the volume during audio playback.
+
+## Supported Platforms
+
+- Android
+- iOS
+
+## Quick Example
+
+    // Play audio
+    //
+    function playAudio(url) {
+        // Play the audio file at url
+        var my_media = new Media(url,
+            // success callback
+            function() {
+                console.log("playAudio():Audio Success");
+            },
+            // error callback
+            function(err) {
+                console.log("playAudio():Audio Error: "+err);
+        });
+
+        // Play audio
+        my_media.play();
+
+        // Mute volume after 2 seconds
+        setTimeout(function() {
+            my_media.setVolume('0.0');
+        }, 2000);
+
+        // Set volume to 1.0 after 5 seconds
+        setTimeout(function() {
+            my_media.setVolume('1.0');
+        }, 5000);
+    }
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for Cordova to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // Cordova is ready
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Set audio volume
+            //
+            function setVolume(volume) {
+                if (my_media) {
+                    my_media.setVolume(volume);
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' + 
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="setVolume('0.0');">Mute Audio</a>
+            <a href="#" class="btn large" onclick="setVolume('1.0');">Unmute Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
diff --git a/docs/en/3.3.0/cordova/media/media.startRecord.md b/docs/en/3.3.0/cordova/media/media.startRecord.md
new file mode 100644
index 0000000..3f998ef
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.startRecord.md
@@ -0,0 +1,143 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.startRecord
+
+Starts recording an audio file.
+
+    media.startRecord();
+
+## Description
+
+The `media.startRecord` method executes synchronously, starts a
+recording for an audio file.
+
+## Supported Platforms
+
+- Android
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Record audio
+    //
+    function recordAudio() {
+        var src = "myrecording.mp3";
+        var mediaRec = new Media(src,
+            // success callback
+            function() {
+                console.log("recordAudio():Audio Success");
+            },
+
+            // error callback
+            function(err) {
+                console.log("recordAudio():Audio Error: "+ err.code);
+            });
+
+        // Record audio
+        mediaRec.startRecord();
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // Record audio
+        //
+        function recordAudio() {
+            var src = "myrecording.amr";
+            var mediaRec = new Media(src, onSuccess, onError);
+
+            // Record audio
+            mediaRec.startRecord();
+
+            // Stop recording after 10 sec
+            var recTime = 0;
+            var recInterval = setInterval(function() {
+                recTime = recTime + 1;
+                setAudioPosition(recTime + " sec");
+                if (recTime >= 10) {
+                    clearInterval(recInterval);
+                    mediaRec.stopRecord();
+                }
+            }, 1000);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            recordAudio();
+        }
+
+        // onSuccess Callback
+        //
+        function onSuccess() {
+            console.log("recordAudio():Audio Success");
+        }
+
+        // onError Callback
+        //
+        function onError(error) {
+            alert('code: '    + error.code    + '\n' +
+                  'message: ' + error.message + '\n');
+        }
+
+        // Set audio position
+        //
+        function setAudioPosition(position) {
+            document.getElementById('audio_position').innerHTML = position;
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="media">Recording audio...</p>
+        <p id="audio_position"></p>
+      </body>
+    </html>
+
+## Android Quirks
+
+- Android devices record audio in Adaptive Multi-Rate format. The specified file should end with a _.amr_ extension.
+
+## iOS Quirks
+
+- iOS only records to files of type _.wav_ and returns an error if the file name extension is not correct.
+
+- If a full path is not provided, the recording is placed in the application's `documents/tmp` directory. This can be accessed via the `File` API using `LocalFileSystem.TEMPORARY`. Any subdirectory specified at record time must already exist.
+
+- Files can be recorded and played back using the documents URI:
+
+        var myMedia = new Media("documents://beer.mp3")
+
+## Tizen Quirks
+
+- Not supported on Tizen devices.
diff --git a/docs/en/3.3.0/cordova/media/media.stop.md b/docs/en/3.3.0/cordova/media/media.stop.md
new file mode 100644
index 0000000..bfcab73
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.stop.md
@@ -0,0 +1,167 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.stop
+
+Stops playing an audio file.
+
+    media.stop();
+
+## Description
+
+The `media.stop` method executes synchronously to stop playing an
+audio file.
+
+## Supported Platforms
+
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Tizen
+- Windows 8
+
+## Quick Example
+
+    // Play audio
+    //
+    function playAudio(url) {
+        // Play the audio file at url
+        var my_media = new Media(url,
+            // success callback
+            function() {
+                console.log("playAudio():Audio Success");
+            },
+            // error callback
+            function(err) {
+                console.log("playAudio():Audio Error: "+err);
+            }
+        );
+
+        // Play audio
+        my_media.play();
+
+        // Pause after 10 seconds
+        setTimeout(function() {
+            my_media.stop();
+        }, 10000);
+    }
+
+## Full Example
+
+        <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+                              "http://www.w3.org/TR/html4/strict.dtd">
+        <html>
+          <head>
+            <title>Media Example</title>
+
+            <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+            <script type="text/javascript" charset="utf-8">
+
+            // Wait for device API libraries to load
+            //
+            document.addEventListener("deviceready", onDeviceReady, false);
+
+            // device APIs are available
+            //
+            function onDeviceReady() {
+                playAudio("http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3");
+            }
+
+            // Audio player
+            //
+            var my_media = null;
+            var mediaTimer = null;
+
+            // Play audio
+            //
+            function playAudio(src) {
+                // Create Media object from src
+                my_media = new Media(src, onSuccess, onError);
+
+                // Play audio
+                my_media.play();
+
+                // Update my_media position every second
+                if (mediaTimer == null) {
+                    mediaTimer = setInterval(function() {
+                        // get my_media position
+                        my_media.getCurrentPosition(
+                            // success callback
+                            function(position) {
+                                if (position > -1) {
+                                    setAudioPosition((position) + " sec");
+                                }
+                            },
+                            // error callback
+                            function(e) {
+                                console.log("Error getting pos=" + e);
+                                setAudioPosition("Error: " + e);
+                            }
+                        );
+                    }, 1000);
+                }
+            }
+
+            // Pause audio
+            //
+            function pauseAudio() {
+                if (my_media) {
+                    my_media.pause();
+                }
+            }
+
+            // Stop audio
+            //
+            function stopAudio() {
+                if (my_media) {
+                    my_media.stop();
+                }
+                clearInterval(mediaTimer);
+                mediaTimer = null;
+            }
+
+            // onSuccess Callback
+            //
+            function onSuccess() {
+                console.log("playAudio():Audio Success");
+            }
+
+            // onError Callback
+            //
+            function onError(error) {
+                alert('code: '    + error.code    + '\n' +
+                      'message: ' + error.message + '\n');
+            }
+
+            // Set audio position
+            //
+            function setAudioPosition(position) {
+                document.getElementById('audio_position').innerHTML = position;
+            }
+
+            </script>
+          </head>
+          <body>
+            <a href="#" class="btn large" onclick="playAudio('http://audio.ibeat.org/content/p1rj1s/p1rj1s_-_rockGuitar.mp3');">Play Audio</a>
+            <a href="#" class="btn large" onclick="pauseAudio();">Pause Playing Audio</a>
+            <a href="#" class="btn large" onclick="stopAudio();">Stop Playing Audio</a>
+            <p id="audio_position"></p>
+          </body>
+        </html>
diff --git a/docs/en/3.3.0/cordova/media/media.stopRecord.md b/docs/en/3.3.0/cordova/media/media.stopRecord.md
new file mode 100644
index 0000000..472ef2a
--- /dev/null
+++ b/docs/en/3.3.0/cordova/media/media.stopRecord.md
@@ -0,0 +1,135 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# media.stopRecord
+
+Stops recording an audio file.
+
+    media.stopRecord();
+
+## Description
+
+The `media.stopRecord` method executes synchronously, stopping the
+recording of an audio file.
+
+## Supported Platforms
+
+- Android
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Record audio
+    //
+    function recordAudio() {
+        var src = "myrecording.mp3";
+        var mediaRec = new Media(src,
+            // success callback
+            function() {
+                console.log("recordAudio():Audio Success");
+            },
+
+            // error callback
+            function(err) {
+                console.log("recordAudio():Audio Error: "+ err.code);
+            }
+        );
+
+        // Record audio
+        mediaRec.startRecord();
+
+        // Stop recording after 10 seconds
+        setTimeout(function() {
+            mediaRec.stopRecord();
+        }, 10000);
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Device Properties Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // Record audio
+        //
+        function recordAudio() {
+            var src = "myrecording.mp3";
+            var mediaRec = new Media(src, onSuccess, onError);
+
+            // Record audio
+            mediaRec.startRecord();
+
+            // Stop recording after 10 sec
+            var recTime = 0;
+            var recInterval = setInterval(function() {
+                recTime = recTime + 1;
+                setAudioPosition(recTime + " sec");
+                if (recTime >= 10) {
+                    clearInterval(recInterval);
+                    mediaRec.stopRecord();
+                }
+            }, 1000);
+        }
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            recordAudio();
+        }
+
+        // onSuccess Callback
+        //
+        function onSuccess() {
+            console.log("recordAudio():Audio Success");
+        }
+
+        // onError Callback
+        //
+        function onError(error) {
+            alert('code: '    + error.code    + '\n' +
+                  'message: ' + error.message + '\n');
+        }
+
+        // Set audio position
+        //
+        function setAudioPosition(position) {
+            document.getElementById('audio_position').innerHTML = position;
+        }
+
+        </script>
+      </head>
+      <body>
+        <p id="media">Recording audio...</p>
+        <p id="audio_position"></p>
+      </body>
+    </html>
+
+## Tizen Quirks
+
+- Not supported on Tizen devices.
diff --git a/docs/en/3.3.0/cordova/notification/notification.alert.md b/docs/en/3.3.0/cordova/notification/notification.alert.md
new file mode 100644
index 0000000..fba120d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/notification/notification.alert.md
@@ -0,0 +1,115 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# notification.alert
+
+Shows a custom alert or dialog box.
+
+    navigator.notification.alert(message, alertCallback, [title], [buttonName])
+
+- __message__: Dialog message. _(String)_
+
+- __alertCallback__: Callback to invoke when alert dialog is dismissed. _(Function)_
+
+- __title__: Dialog title. _(String)_ (Optional, defaults to `Alert`)
+
+- __buttonName__: Button name. _(String)_ (Optional, defaults to `OK`)
+
+## Description
+
+Most Cordova implementations use a native dialog box for this feature,
+but some platforms use the browser's `alert` function, which is
+typically less customizable.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Amazon Fire OS / Android / BlackBerry 10 (OS 5.0 and higher) / iOS / Tizen
+    //
+    function alertDismissed() {
+        // do something
+    }
+
+    navigator.notification.alert(
+        'You are the winner!',  // message
+        alertDismissed,         // callback
+        'Game Over',            // title
+        'Done'                  // buttonName
+    );
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Notification Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Empty
+        }
+
+        // alert dialog dismissed
+            function alertDismissed() {
+                // do something
+            }
+
+        // Show a custom alertDismissed
+        //
+        function showAlert() {
+            navigator.notification.alert(
+                'You are the winner!',  // message
+                alertDismissed,         // callback
+                'Game Over',            // title
+                'Done'                  // buttonName
+            );
+        }
+
+        </script>
+      </head>
+      <body>
+        <p><a href="#" onclick="showAlert(); return false;">Show Alert</a></p>
+      </body>
+    </html>
+
+## Windows Phone 7 and 8 Quirks
+
+- There is no built-in browser alert, but you can bind one as follows to call `alert()` in the global scope:
+
+        window.alert = navigator.notification.alert;
+
+- Both `alert` and `confirm` are non-blocking calls, results of which are only available asynchronously.
+
diff --git a/docs/en/3.3.0/cordova/notification/notification.beep.md b/docs/en/3.3.0/cordova/notification/notification.beep.md
new file mode 100644
index 0000000..75af9b0
--- /dev/null
+++ b/docs/en/3.3.0/cordova/notification/notification.beep.md
@@ -0,0 +1,111 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# notification.beep
+
+The device plays a beep sound.
+
+    navigator.notification.beep(times);
+
+- __times__: The number of times to repeat the beep. _(Number)_
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // Beep twice!
+    navigator.notification.beep(2);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Notification Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Empty
+        }
+
+        // Show a custom alert
+        //
+        function showAlert() {
+            navigator.notification.alert(
+                'You are the winner!',  // message
+                'Game Over',            // title
+                'Done'                  // buttonName
+            );
+        }
+
+        // Beep three times
+        //
+        function playBeep() {
+            navigator.notification.beep(3);
+        }
+
+        // Vibrate for 2 seconds
+        //
+        function vibrate() {
+            navigator.notification.vibrate(2000);
+        }
+
+        </script>
+      </head>
+      <body>
+        <p><a href="#" onclick="showAlert(); return false;">Show Alert</a></p>
+        <p><a href="#" onclick="playBeep(); return false;">Play Beep</a></p>
+        <p><a href="#" onclick="vibrate(); return false;">Vibrate</a></p>
+      </body>
+    </html>
+
+## Amazon Fire OS Quirks
+
+- Amazon Fire OS plays the default __Notification Sound__ specified under the __Settings/Display & Sound__ panel.
+
+## Android Quirks
+
+- Android plays the default __Notification ringtone__ specified under the __Settings/Sound & Display__ panel.
+
+## Windows Phone 7 and 8 Quirks
+
+- Relies on a generic beep file from the Cordova distribution.
+
+## Tizen Quirks
+
+- Tizen implements beeps by playing an audio file via the media API.
+
+- The beep file must be short, must be located in a `sounds` subdirectory of the application's root directory, and must be named `beep.wav`.
+
diff --git a/docs/en/3.3.0/cordova/notification/notification.confirm.md b/docs/en/3.3.0/cordova/notification/notification.confirm.md
new file mode 100755
index 0000000..01c97ea
--- /dev/null
+++ b/docs/en/3.3.0/cordova/notification/notification.confirm.md
@@ -0,0 +1,126 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# notification.confirm
+
+Displays a customizable confirmation dialog box.
+
+    navigator.notification.confirm(message, confirmCallback, [title], [buttonLabels])
+
+- __message__: Dialog message. _(String)_
+
+- __confirmCallback__: Callback to invoke with index of button pressed (1, 2, or 3) or when the dialog is dismissed without a button press (0). _(Function)_
+
+- __title__: Dialog title. _(String)_ (Optional, defaults to `Confirm`)
+
+- __buttonLabels__: Array of strings specifying button labels. _(Array)_  (Optional, defaults to [`OK,Cancel`])
+
+## Description
+
+The `notification.confirm` method displays a native dialog box that is
+more customizable than the browser's `confirm` function.
+
+## confirmCallback
+
+The `confirmCallback` executes when the user presses one of the
+buttons in the confirmation dialog box.
+
+The callback takes the argument `buttonIndex` _(Number)_, which is the
+index of the pressed button. Note that the index uses one-based
+indexing, so the value is `1`, `2`, `3`, etc.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    // process the confirmation dialog result
+    function onConfirm(buttonIndex) {
+        alert('You selected button ' + buttonIndex);
+    }
+
+    // Show a custom confirmation dialog
+    //
+    function showConfirm() {
+        navigator.notification.confirm(
+            'You are the winner!', // message
+             onConfirm,            // callback to invoke with index of button pressed
+            'Game Over',           // title
+            ['Restart','Exit']         // buttonLabels
+        );
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Notification Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Empty
+        }
+
+        // process the confirmation dialog result
+        function onConfirm(buttonIndex) {
+            alert('You selected button ' + buttonIndex);
+        }
+
+        // Show a custom confirmation dialog
+        //
+        function showConfirm() {
+            navigator.notification.confirm(
+                'You are the winner!', // message
+                 onConfirm,            // callback to invoke with index of button pressed
+                'Game Over',           // title
+                ['Restart','Exit']         // buttonLabels
+            );
+        }
+
+        </script>
+      </head>
+      <body>
+        <p><a href="#" onclick="showConfirm(); return false;">Show Confirm</a></p>
+      </body>
+    </html>
+
+## Windows Phone 7 and 8 Quirks
+
+- There is no built-in browser function for `window.confirm`, but you can bind it by assigning:
+
+        window.confirm = navigator.notification.confirm;
+
+- Calls to `alert` and `confirm` are non-blocking, so the result is only available asynchronously.
+
diff --git a/docs/en/3.3.0/cordova/notification/notification.md b/docs/en/3.3.0/cordova/notification/notification.md
new file mode 100644
index 0000000..7d9b1f7
--- /dev/null
+++ b/docs/en/3.3.0/cordova/notification/notification.md
@@ -0,0 +1,87 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Notification
+
+> Visual, audible, and tactile device notifications.
+
+## Methods
+
+- `notification.alert`
+- `notification.confirm`
+- `notification.prompt`
+- `notification.beep`
+- `notification.vibrate`
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.dialogs
+        $ cordova plugin add org.apache.cordova.vibration
+        $ cordova plugin ls
+        [ 'org.apache.cordova.dialogs',
+          'org.apache.cordova.vibration' ]
+        $ cordova plugin rm org.apache.cordova.dialogs
+        $ cordova plugin rm org.apache.cordova.vibration
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS
+
+        (in app/res/xml/config.xml)
+        <feature name="Notification">
+            <param name="android-package" value="org.apache.cordova.dialogs.Notification" />
+        </feature>
+        <feature name="Vibration">
+            <param name="android-package" value="org.apache.cordova.vibration.Vibration" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.VIBRATE" />
+
+* Android
+
+        (in app/res/xml/config.xml)
+        <feature name="Notification">
+            <param name="android-package" value="org.apache.cordova.dialogs.Notification" />
+        </feature>
+        <feature name="Vibration">
+            <param name="android-package" value="org.apache.cordova.vibration.Vibration" />
+        </feature>
+
+        (in app/AndroidManifest.xml)
+        <uses-permission android:name="android.permission.VIBRATE" />
+
+* BlackBerry 10
+
+        (in www/config.xml)
+        <feature name="Notification" value="Notification"/>
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="Notification">
+            <param name="ios-package" value="CDVNotification" />
+        </feature>
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
diff --git a/docs/en/3.3.0/cordova/notification/notification.prompt.md b/docs/en/3.3.0/cordova/notification/notification.prompt.md
new file mode 100644
index 0000000..be00e1d
--- /dev/null
+++ b/docs/en/3.3.0/cordova/notification/notification.prompt.md
@@ -0,0 +1,124 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# notification.prompt
+
+Shows a customizable prompt dialog box.
+
+    navigator.notification.prompt(message, promptCallback, [title], [buttonLabels], [defaultText])
+
+- __message__: Dialog message. _(String)_
+
+- __promptCallback__: Callback to invoke when a button is pressed. _(Function)_
+
+- __title__: Dialog title _(String)_ (Optional, defaults to `Prompt`)
+
+- __buttonLabels__: Array of strings specifying button labels _(Array)_ (Optional, defaults to `["OK","Cancel"]`)
+
+- __defaultText__: Default textbox input value (`String`) (Optional, Default: empty string)
+
+## Description
+
+The `notification.prompt` method displays a native dialog box that is
+more customizable than the browser's `prompt` function.
+
+## promptCallback
+
+The `promptCallback` executes when the user presses one of the buttons
+in the prompt dialog box. The `results` object passed to the callback
+contains the following properties:
+
+- __buttonIndex__: The index of the pressed button. _(Number)_ Note that the index uses one-based indexing, so the value is `1`, `2`, `3`, etc.
+
+- __input1__: The text entered in the prompt dialog box. _(String)_
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+
+## Quick Example
+
+    // process the promp dialog results
+    function onPrompt(results) {
+        alert("You selected button number " + results.buttonIndex + " and entered " + results.input1);
+    }
+
+    // Show a custom prompt dialog
+    //
+    function showPrompt() {
+        navigator.notification.prompt(
+            'Please enter your name',  // message
+            onPrompt,                  // callback to invoke
+            'Registration',            // title
+            ['Ok','Exit'],             // buttonLabels
+            'Jane Doe'                 // defaultText
+        );
+    }
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Notification Prompt Dialog Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Empty
+        }
+
+        // process the promptation dialog result
+        function onPrompt(results) {
+            alert("You selected button number " + results.buttonIndex + " and entered " + results.input1);
+        }
+
+        // Show a custom prompt dialog
+        //
+        function showPrompt() {
+            navigator.notification.prompt(
+                'Please enter your name',  // message
+                onPrompt,                  // callback to invoke
+                'Registration',            // title
+                ['Ok','Exit'],             // buttonLabels
+                'Jane Doe'                 // defaultText
+            );
+        }
+
+        </script>
+      </head>
+      <body>
+        <p><a href="#" onclick="showPrompt(); return false;">Show Prompt</a></p>
+      </body>
+    </html>
+
+## Android Quirks
+
+- Android supports a maximum of three buttons, and ignores any more than that.
+
+- On Android 3.0 and later, buttons are displayed in reverse order for devices that use the Holo theme.
diff --git a/docs/en/3.3.0/cordova/notification/notification.vibrate.md b/docs/en/3.3.0/cordova/notification/notification.vibrate.md
new file mode 100644
index 0000000..518fe52
--- /dev/null
+++ b/docs/en/3.3.0/cordova/notification/notification.vibrate.md
@@ -0,0 +1,98 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# notification.vibrate
+
+Vibrates the device for the specified amount of time.
+
+    navigator.notification.vibrate(milliseconds)
+
+- __time__: Milliseconds to vibrate the device, where 1000 milliseconds equals 1 second. _(Number)_
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+
+## Quick Example
+
+    // Vibrate for 2.5 seconds
+    //
+    navigator.notification.vibrate(2500);
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Notification Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            // Empty
+        }
+
+        // Show a custom alert
+        //
+        function showAlert() {
+            navigator.notification.alert(
+                'You are the winner!',  // message
+                'Game Over',            // title
+                'Done'                  // buttonName
+            );
+        }
+
+        // Beep three times
+        //
+        function playBeep() {
+            navigator.notification.beep(3);
+        }
+
+        // Vibrate for 2 seconds
+        //
+        function vibrate() {
+            navigator.notification.vibrate(2000);
+        }
+
+        </script>
+      </head>
+      <body>
+        <p><a href="#" onclick="showAlert(); return false;">Show Alert</a></p>
+        <p><a href="#" onclick="playBeep(); return false;">Play Beep</a></p>
+        <p><a href="#" onclick="vibrate(); return false;">Vibrate</a></p>
+      </body>
+    </html>
+
+## iOS Quirks
+
+- __time__: Ignores the specified time and vibrates for a pre-set amount of time.
+
+        navigator.notification.vibrate();
+        navigator.notification.vibrate(2500);   // 2500 is ignored
diff --git a/docs/en/3.3.0/cordova/splashscreen/splashscreen.hide.md b/docs/en/3.3.0/cordova/splashscreen/splashscreen.hide.md
new file mode 100644
index 0000000..ad40ba5
--- /dev/null
+++ b/docs/en/3.3.0/cordova/splashscreen/splashscreen.hide.md
@@ -0,0 +1,83 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# splashscreen.hide
+
+Dismiss the splash screen.
+
+    navigator.splashscreen.hide();
+
+## Description
+
+This method dismisses the application's splash screen.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- BlackBerry 10
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    navigator.splashscreen.hide();
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Splashscreen Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.splashscreen.hide();
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+      </body>
+    </html>
+
+## BlackBerry 10 Quirk
+
+The `config.xml` file's `AutoHideSplashScreen` setting must be
+`false`. 
+
+## iOS Quirk
+
+The `config.xml` file's `AutoHideSplashScreen` setting must be
+`false`. To delay hiding the splash screen for two seconds, add a
+timer such as the following in the `deviceready` event handler:
+
+        setTimeout(function() {
+            navigator.splashscreen.hide();
+        }, 2000);
diff --git a/docs/en/3.3.0/cordova/splashscreen/splashscreen.md b/docs/en/3.3.0/cordova/splashscreen/splashscreen.md
new file mode 100644
index 0000000..2778733
--- /dev/null
+++ b/docs/en/3.3.0/cordova/splashscreen/splashscreen.md
@@ -0,0 +1,68 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Splashscreen
+
+> Displays and hides the application's splash screen.
+
+## Methods
+
+- splashscreen.show
+- splashscreen.hide
+
+## Accessing the Feature
+
+As of version 3.0, Cordova implements device-level APIs as _plugins_.
+Use the CLI's `plugin` command, described in The Command-Line
+Interface, to add or remove this feature for a project:
+
+        $ cordova plugin add org.apache.cordova.splashscreen
+        $ cordova plugin ls
+        [ 'org.apache.cordova.splashscreen' ]
+        $ cordova plugin rm org.apache.cordova.splashscreen
+
+These commands apply to all targeted platforms, but modify the
+platform-specific configuration settings described below:
+
+* Amazon Fire OS (in `res/xml/config.xml`)
+
+        <feature name="SplashScreen">
+            <param name="android-package" value="org.apache.cordova.splashscreen.SplashScreen" />
+        </feature>
+
+* Android (in `res/xml/config.xml`)
+
+        <feature name="SplashScreen">
+            <param name="android-package" value="org.apache.cordova.splashscreen.SplashScreen" />
+        </feature>
+
+* BlackBerry 10 (in `www/config.xml`)
+
+        <feature name="SplashScreen" value="SplashScreen" />
+
+* iOS (in the named application directory's `config.xml`)
+
+        <feature name="SplashScreen">
+            <param name="ios-package" value="CDVSplashScreen" />
+        </feature>
+
+Some platforms may support this feature without requiring any special
+configuration.  See Platform Support for an overview.
+
+See Icons and Splash Screens for information on how to configures these images.
diff --git a/docs/en/3.3.0/cordova/splashscreen/splashscreen.show.md b/docs/en/3.3.0/cordova/splashscreen/splashscreen.show.md
new file mode 100644
index 0000000..a462ed2
--- /dev/null
+++ b/docs/en/3.3.0/cordova/splashscreen/splashscreen.show.md
@@ -0,0 +1,79 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# splashscreen.show
+
+Displays the splash screen.
+
+    navigator.splashscreen.show();
+
+## Description
+
+This method displays the application's splash screen.
+
+## Supported Platforms
+
+- Amazon Fire OS
+- Android
+- iOS
+- Windows Phone 7 and 8
+- Windows 8
+
+## Quick Example
+
+    navigator.splashscreen.show();
+
+## Full Example
+
+    <!DOCTYPE html>
+    <html>
+      <head>
+        <title>Splashscreen Example</title>
+
+        <script type="text/javascript" charset="utf-8" src="cordova.js"></script>
+        <script type="text/javascript" charset="utf-8">
+
+        // Wait for device API libraries to load
+        //
+        document.addEventListener("deviceready", onDeviceReady, false);
+
+        // device APIs are available
+        //
+        function onDeviceReady() {
+            navigator.splashscreen.show();
+        }
+
+        </script>
+      </head>
+      <body>
+        <h1>Example</h1>
+      </body>
+    </html>
+
+Your application can not call `navigator.splashscreen.show()` until
+the app has started and the `deviceready` event has fired. But since
+typically the
+splash screen is meant to be visible before your app has started, that would
+seem to defeat the purpose of the splash screen.
+Providing some configuration in `config.xml` will automatically `show` the
+splash screen immediately after your app launch and before it has fully
+started and received the `deviceready` event. See Icons and Splash Screens
+for more information on doing this configuration. For this reason, it is
+unlikely you need to call `navigator.splashscreen.show()` to make the
+splash screen visible for app startup.
diff --git a/docs/en/3.3.0/cordova/storage/storage.md b/docs/en/3.3.0/cordova/storage/storage.md
new file mode 100644
index 0000000..f17a6bd
--- /dev/null
+++ b/docs/en/3.3.0/cordova/storage/storage.md
@@ -0,0 +1,70 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Storage
+
+> An overview of storage options for Cordova.
+
+Several storage APIs are available for Cordova applications. 
+See
+[html5rocks](http://www.html5rocks.com/en/features/storage).
+for a more complete overview and examples.
+
+## LocalStorage
+
+Also known as _web storage_, _simple storage_, or by its alternate
+_session storage_ interface, this API provides synchronous key/value
+pair storage, and is available in underlying WebView implementations.
+Refer to [the W3C spec](http://www.w3.org/TR/webstorage/) for details.
+
+__Windows Phone 7 Quirk__: Dot notation is _not_ available, so be sure
+to use `setItem` or `getItem` rather than access keys directly from
+the storage object, as in `window.localStorage.someKey`.
+
+## WebSQL
+
+This API is available in the underlying WebView.
+The [Web SQL Database Specification](http://dev.w3.org/html5/webdatabase/)
+offers more full-featured database tables accessed via SQL queries.
+
+The following platforms support WebSQL:
+
+- Android
+- BlackBerry 10
+- iOS
+- Tizen
+
+## IndexedDB
+
+This API is available in the underlying WebView.
+[Indexed DB](http://www.w3.org/TR/IndexedDB/) offers more features
+than LocalStorage but fewer than WebSQL.
+
+The following platforms support IndexedDB:
+
+- Windows Phone 8
+- BlackBerry 10
+
+## Plugin-Based Options
+
+In addition to the storage APIs listed above, the File API allows you
+to cache data on the local file system.  Other
+[Cordova plugins](http://plugins.cordova.io/) provide similar storage
+options.
+
diff --git a/docs/en/3.3.0/guide/appdev/privacy/index.md b/docs/en/3.3.0/guide/appdev/privacy/index.md
new file mode 100644
index 0000000..601ee38
--- /dev/null
+++ b/docs/en/3.3.0/guide/appdev/privacy/index.md
@@ -0,0 +1,117 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Privacy Guide
+
+Mobile privacy is a critical issue that every app developer must
+address. Your users expect that their private information will be
+collected and treated appropriately by your app. Also, there are an
+increasing number of jurisdictions that now have legal requirements
+regarding mobile privacy practices.
+
+This guide on mobile app privacy should be considered a _primer_
+addressing some the most significant issues. It outlines some broadly
+accepted best practices and provides references to other more detailed
+guides and references.
+
+* __Privacy Policy__: You app should include a privacy policy that
+  addresses topics such as what kind of information your app collects
+  from or about your users, how that information is used, with whom it
+  is shared, and how users can make privacy-related choices within the
+  app. To aid understanding, you should use plain language and avoid
+  technical jargon. You should make your privacy policy available for
+  users to review prior to download, such as in the app description in
+  the app marketplace. In addition, you should make your privacy
+  policy available within the app itself. The limited size of mobile
+  device displays creates challenges for displaying privacy policies
+  to users. Consider developing a _short form_ of the policy that
+  includes the most important information, and then provide a link to
+  the "long form" policy for those interested in more details. Several
+  groups are attempting to develop icon-based standards for
+  communicating privacy practices, which you may want to consider once
+  these standards mature.
+
+* __Collection of sensitive information__: An app's collection of
+  sensitive personal information raises important privacy concerns.
+  Examples of sensitive personal information include financial
+  information, health information, and information from or about
+  children. It also includes information gathered from certain sensors
+  and databases typically found on mobile devices and tablets, such as
+  geolocation information, contacts/phonebook, microphone/camera, and
+  stored pictures/videos. See the following documentation pages for
+  more information: [camera](cordova_camera_camera.md.html),
+  [capture](cordova_media_capture_capture.md.html),
+  [contacts](cordova_contacts_contacts.md.html), and
+  [geolocation](cordova_geolocation_geolocation.md.html). Generally,
+  you should obtain a user's express permission before collecting
+  sensitive information and, if possible, provide a control mechanism
+  that allows a user to easily change permissions. App operating
+  systems can help in some instances by presenting just-in-time dialog
+  boxes that ask for the user's permission before collection. In these
+  cases, be sure to take advantage of any opportunity to customize the
+  dialog box text to clarify how the app uses and, if applicable,
+  shares such information.
+
+* __Avoiding user surprise__: If your app collects or uses information
+  in a way that may be surprising to users in light of the primary
+  purpose of your app (for example, a music player that accesses
+  stored pictures), you should take similar steps as with the
+  collection of sensitive personal information. That is, you should
+  strongly consider the use of just-in-time dialog boxes to inform the
+  user about the collection or use of that information and, if
+  appropriate, provide a corresponding privacy control.
+
+* __Third party data collection or sharing__: If you app collects
+  information that is provided to another company--such as a social
+  networking platform or an ad network (for example, if your app
+  displays advertising)--you should inform your users of that
+  collection and sharing. At a minimum, your privacy policy should
+  describe the information collection and sharing and, if appropriate,
+  offer your users the ability to control or opt-out of such
+  collection or sharing.
+
+* __Collection limitation and security__: Your users entrust your app
+  with their information and they expect that you will take
+  appropriate security precautions to protect it. One of the best ways
+  to avoid security compromises of personal information is not to
+  collect the information in the first place unless your app has a
+  specific and legitimate business reason for the collection. For
+  information that does need to be collected, ensure that you provide
+  appropriate security controls to protect that information, whether
+  it is stored on the device or on your backend servers. You should
+  also develop an appropriate data retention policy that is
+  implemented within the app and on your backend servers.
+
+Following are some additional helpful mobile privacy guides for developers:
+
+* California Attorney General, [Privacy on the Go: Recommendations for the Mobile Ecosystem][1]
+
+* Center for Democracy & Technology, Future of Privacy Forum, [Best Practices for Mobile App Developers][2]
+
+* CTIA-The Wireless Association, [Best Practices and Guidelines for Location Based Services][3]
+
+* Federal Trade Commission, [Mobile Privacy Disclosures: Building Trust Through Transparency][4]
+
+* Future of Privacy Forum, [Application Privacy][5] Website
+
+[1]: http://oag.ca.gov/sites/all/files/pdfs/privacy/privacy_on_the_go.pdf
+[2]: http://www.futureofprivacy.org/wp-content/uploads/Best-Practices-for-Mobile-App-Developers_Final.pdf
+[3]: http://www.ctia.org/business_resources/wic/index.cfm/AID/11300
+[4]: http://www.ftc.gov/os/2013/02/130201mobileprivacyreport.pdf
+[5]: http://www.applicationprivacy.org
diff --git a/docs/en/3.3.0/guide/appdev/whitelist/index.md b/docs/en/3.3.0/guide/appdev/whitelist/index.md
new file mode 100644
index 0000000..d734a3e
--- /dev/null
+++ b/docs/en/3.3.0/guide/appdev/whitelist/index.md
@@ -0,0 +1,168 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Whitelist Guide
+
+Domain whitelisting is a security model that controls access to
+external domains over which you application has no control.  Cordova's
+default security policy allows access to any site. Before moving your
+application to production, you should formulate a whitelist and allow
+access to specific network domains and subdomains.
+
+Cordova adheres to the [W3C Widget Access][1] specification, which
+relies on the `<access>` element within the app's `config.xml` file to
+enable network access to specific domains. For projects that rely on
+the CLI workflow described in The Command-Line Interface, this file is
+located in the project's top-level `www` directory. Otherwise for
+platform-specific development paths, locations are listed in the
+sections below. (See the various Platform Guides for more information
+on each platform.)
+
+The following examples demonstrate whitelist syntax:
+
+* Access to [google.com][2]:
+
+        <access origin="http://google.com" />
+
+* Access to the secure [google.com][3] (`https://`):
+
+        <access origin="https://google.com" />
+
+* Access to the subdomain [maps.google.com][4]:
+
+        <access origin="http://maps.google.com" />
+
+* Access to all the subdomains on [google.com][2], for example
+  [mail.google.com][5] and [docs.google.com][6]:
+
+        <access origin="http://*.google.com" />
+
+* Access to _all_ domains, for example, [google.com][2] and
+  [developer.mozilla.org][7]:
+
+        <access origin="*" />
+
+  This is the default value for newly created CLI projects.
+
+## Amazon Fire OS Whitelisting
+
+Platform-specific whitelisting rules are found in
+`res/xml/config.xml`.
+
+## Android Whitelisting
+
+Platform-specific whitelisting rules are found in
+`res/xml/config.xml`.
+
+__NOTE__: On Android 2.3 and before, domain whitelisting only works
+for `href` hyperlinks, not referenced resources such as images and
+scripts. Take steps to avoid scripts from being injected into the
+application.
+
+Navigating to non-whitelisted domains via `href` hyperlink causes the
+page to open in the default browser rather than within the
+application.  (Compare this to iOS's behavior noted below.)
+
+## iOS Whitelisting
+
+The platform's whitelisting rules are found in the named application
+directory's `config.xml` file.
+
+Origins specified without a protocol, such as `www.apache.org` rather
+than `http://www.apache.org`, default to all of the `http`, `https`,
+`ftp`, and `ftps` schemes.
+
+Wildcards on the iOS platform are more flexible than in the [W3C
+Widget Access][1] specification.  For example, the following accesses
+all subdomains and top-level domains such as `.com` and `.net`:
+
+        <access origin="*.google.*" />
+
+Unlike the Android platform noted above, navigating to non-whitelisted
+domains via `href` hyperlink on iOS prevents the page from opening at
+all.
+
+## BlackBerry 10 Whitelisting
+
+The whitelisting rules are found in `www/config.xml`.
+
+BlackBerry 10's use of wildcards differs from other platforms in two
+ways:
+
+* Any content accessed by `XMLHttpRequest` must be declared
+  explicity. Setting `origin="*"` does not work in this case.
+  Alternatively, all web security may be disabled using the
+  `WebSecurity` preference described in BlackBerry Configuration:
+ 
+        <preference name="websecurity" value="disable" />
+
+* As an alternative to setting `*.domain`, set an additional
+  `subdomains` attribute to `true`. It should be set to `false` by
+  default. For example, the following allows access to `google.com`,
+  `maps.google.com`, and `docs.google.com`:
+
+        <access origin="http://google.com" subdomains="true" />
+
+  The following narrows access to `google.com`:
+
+        <access origin="http://google.com" subdomains="false" />
+
+  Specify access to all domains, including the local `file://`
+  protocol:
+
+    <access origin="*" subdomains="true" />
+
+(For more information on support, see BlackBerry's documentation on the
+[access element][8].)
+
+## iOS Changes in 3.1.0
+
+Prior to version 3.1.0, Cordova-iOS included some non-standard extensions to the domain whilelisting scheme supported by other Cordova platforms. As of 3.1.0, the iOS whitelist now conforms to the resource whitelist syntax described at the top of this document. If you upgrade from pre-3.1.0, and you were using these extensions, you may have to change your `config.xml` file in order to continue whitelisting the same set of resources as before.
+
+Specifically, these patterns need to be updated:
+
+- `apache.org` (no protocol): This would previously match `http`, `https`, `ftp`, and `ftps` protocols. Change to "`*://apache.org/*`" to include all protocols, or include a line for each protocol you need to support.
+
+- `http://apache.*` (wildcard at end of domain): This would previously match all top-level-domains, including all possible two-letter TLDs (but not useful domains like .co.uk). Include a line for each TLD which you actually control, and need to whitelist.
+
+- `h*t*://ap*he.o*g` (wildcards for random missing letters): These are no longer supported; change to include a line for each domain and protocol that you actually need to whitelist.
+
+## Windows Phone Whitelisting
+
+The whitelisting rules for Windows Phone 7 and 8 are found in the
+app's `config.xml` file.
+
+## Tizen Whitelisting
+
+Whitelisting rules are found in the app's `config.xml` file. The
+platform relies on the same `subdomains` attribute as the BlackBerry
+platform.
+(For more information on support, see Tizen's documentation on the
+[access element][9].)
+
+[1]: http://www.w3.org/TR/widgets-access/
+[2]: http://google.com
+[3]: https://google.com
+[4]: http://maps.google.com
+[5]: http://mail.google.com
+[6]: http://docs.google.com
+[7]: http://developer.mozilla.org
+[8]: https://developer.blackberry.com/html5/documentation/ww_developing/Access_element_834677_11.html
+[9]: https://developer.tizen.org/help/index.jsp?topic=%2Forg.tizen.web.appprogramming%2Fhtml%2Fide_sdk_tools%2Fconfig_editor_w3celements.htm
+
diff --git a/docs/en/3.3.0/guide/cli/index.md b/docs/en/3.3.0/guide/cli/index.md
new file mode 100644
index 0000000..7cf5bfc
--- /dev/null
+++ b/docs/en/3.3.0/guide/cli/index.md
@@ -0,0 +1,486 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+
+---
+
+# The Command-Line Interface
+
+This guide shows you how to create applications and deploy them to
+various native mobile platforms using the `cordova` command-line
+interface (CLI). This tool allows you to create new projects, build
+them on different platforms, and run on real devices or within emulators. The CLI
+is the main tool to use for the cross-platform workflow (See the Overview for a description
+of the various workflows.)  However, you can also use the CLI to initialize project code, after
+which you use various platforms' SDKs and shell tools for continued development.
+
+## Prerequisites
+
+Before running any command-line tools, you need to install SDKs for
+each platform you wish to target.
+(See the Platform Guides for more details.)
+
+To add support or rebuild a project for any platform, you need to run
+the command-line interface from the same machine that supports the
+platform's SDK. The CLI supports the following combinations:
+
+* iOS             (Mac)
+* Amazon Fire OS  (Mac, Linux, Windows)
+* Android         (Mac, Linux)
+* BlackBerry 10   (Mac, Linux, Windows)
+* Windows Phone 7 (Windows)
+* Windows Phone 8 (Windows)
+* Windows 8       (Windows)
+* Firefox OS      (Mac, Linux, Windows)
+
+On the Mac, the command-line is available via the _Terminal_
+application. On the PC, it's available as _Command Prompt_ under
+_Accessories_.
+
+The more likely it is that you run the CLI from different machines,
+the more it makes sense to maintain a remote source code repository,
+whose assets you pull down to local working directories.
+
+To install the `cordova` command-line tool, follow these steps:
+
+1. Download and install [Node.js](http://nodejs.org/). Following
+   installation, you should be able to invoke `node` or `npm` on your
+   command line. 
+
+1. Install the `cordova` utility. In Unix, prefixing the additional
+   `sudo` command may be necessary to install development utilities in
+   otherwise restricted directories:
+
+        $ sudo npm install -g cordova
+
+   The installation log may produce errors for any uninstalled
+   platform SDKs.  Following installation, you should be able to run
+   `cordova` on the command line.
+
+   **NOTE**: The `-g` flag above tells npm to install cordova globally. 
+   You may need to add the npm directory to your PATH in order to invoke
+   globally installed npm modules. On Windows, npm can usually be found at
+   `C:\Users\username\AppData\Roaming\npm` and on Unix at
+   `/usr/local/share/npm`.
+   
+## Create the App
+
+Go to the directory where you maintain your source code, and run a
+command such as the following:
+
+        $ cordova create hello com.example.hello HelloWorld
+
+It may take some time for the command to complete, so be patient. Running
+the command with the ` -d` option displays information about its progress.
+
+The first argument specifies a _hello_ directory to be generated
+for your project. Its `www` subdirectory houses your application's
+home page, along with various resources under `css`, `js`, and `img`,
+which follow common web development file-naming conventions. The
+`config.xml` file contains important metadata needed to generate and
+distribute the application.
+
+The other two arguments are optional: the `com.example.hello` argument
+provides your project with a reverse domain-style identifier, and the
+`HelloWorld` provides the application's display text. You can edit
+both of these values later in the `config.xml` file.
+
+## Add Platforms
+
+All subsequent commands need to be run within the project's directory,
+or any subdirectories within its scope:
+
+        $ cd hello
+
+Before you can build the project, you need to specify a set of target
+platforms. Your ability to run these commands depends on whether your
+machine supports each SDK, and whether you have already installed each
+SDK.  Run any of these from a Mac:
+
+        $ cordova platform add ios
+        $ cordova platform add amazon-fireos
+        $ cordova platform add android
+        $ cordova platform add blackberry10
+        $ cordova platform add firefoxos
+
+Run any of these from a Windows machine, where _wp_ refers to
+different versions of the Windows Phone operating system:
+
+        $ cordova platform add wp7
+        $ cordova platform add wp8
+        $ cordova platform add windows8
+        $ cordova platform add amazon-fireos
+        $ cordova platform add android
+        $ cordova platform add blackberry10
+        $ cordova platform add firefoxos
+
+Run this to check your current set of platforms:
+
+        $ cordova platforms ls
+
+(Note the `platform` and `platforms` commands are synonymous.)
+
+Run either of the following synonymous commands to remove a platform:
+
+        $ cordova platform remove blackberry10
+        $ cordova platform rm amazon-fireos
+        $ cordova platform rm android
+
+Running commands to add or remove platforms affects the contents of
+the project's _platforms_ directory, where each specified platform
+appears as a subdirectory. The _www_ source directory is reproduced
+within each platform's subdirectory, appearing for example in
+`platforms/ios/www` or `platforms/android/assets/www`. Because the CLI
+constantly copies over files from the source _www_ folder, you should only
+edit these files and not the ones located under the _platforms_ subdirectories.
+If you use version control software, you should add this source _www_ folder, 
+along with the _merges_ folder, to your version control system. (More information
+about the _merges_ folder can be found in the Customize Each Platform section below.)
+
+**WARNING**: When using the CLI to build your application, you are strongly discouraged
+from editing any files in the `/platforms/` folder unless you know what you are doing
+or are specifically told otherwise in documentation. This is because the files in the 
+`/platforms/` direcotry will be overwritten on prepare or plugin reinstallation. 
+
+If you wish at this point, you can use an SDK such as Eclipse or Xcode
+to open the project you created. You will need to open the derivative set of assets
+from the `/platforms/` directory to develop with an SDK. This is because
+the SDK specific metadata files are stored within the appropriate `/platform/` subdirectory.
+(See the Platform Guides for information on how to develop applications within each IDE.)
+Use this approach if you simply want to initialize a project using the CLI and 
+then switch to an SDK for native work.
+
+Read on if you wish to use the cross-platform workflow approach (the CLI) for the entire
+development cycle.
+
+## Build the App
+
+By default, the `cordova create` script generates a skeletal web-based
+application whose home page is the project's `www/index.html` file.
+Edit this application however you want, but any initialization should
+be specified as part of the `deviceready` event handler, referenced by
+default from `www/js/index.js`.
+
+Run the following command to iteratively build the project:
+
+        $ cordova build
+
+This generates platform-specific code within the project's `platforms`
+subdirectory.  You can optionally limit the scope of each build to
+specific platforms:
+
+        $ cordova build ios
+
+The `cordova build` command is a shorthand for the following, which in
+this example is also targeted to a single platform:
+
+        $ cordova prepare ios
+        $ cordova compile ios
+
+In this case, once you run `prepare`, you can use Apple's Xcode SDK as
+an alternative to modify and compile the platform-specific code that
+Cordova generates within `platforms/ios`. You can use the same
+approach with other platforms' SDKs.
+
+## Test the App on an Emulator or Device
+
+SDKs for mobile platforms often come bundled with emulators that
+execute a device image, so that you can launch the app from the home
+screen and see how it interacts with many platform features.  Run a
+command such as the following to rebuild the app and view it within a
+specific platform's emulator:
+
+        $ cordova emulate android
+
+Some mobile platforms emulate a particular device by default, such as
+the iPhone for iOS projects. For other platforms, you may need to
+first associate a device with an emulator.
+
+Note: Emulator support is currently not available for Amazon Fire OS
+
+(See the Platform Guides for details.)
+For example, you may first run the `android` command to launch the
+Android SDK, then run a particular device image, which launches it
+according to its default behavior:
+
+![](img/guide/cli/android_emulate_init.png)
+
+Following up with the `cordova emulate` command refreshes the emulator
+image to display the latest application, which is now available for
+launch from the home screen:
+
+![](img/guide/cli/android_emulate_install.png)
+
+Alternately, you can plug the handset into your computer and test the
+app directly:
+
+        $ cordova run android
+
+Before running this command, you need to set up the device for
+testing, following procedures that vary for each platform. In
+Android and Amazon Fire OS devices, you would have to enable a __USB debugging__ option on
+the device, and perhaps add a USB driver depending on your development
+environmnent.
+See Platform Guides for details on each platform's requirements.
+
+## Add Plugin Features
+
+When you build and view a new project, the default application that
+appears doesn't do very much. You can modify the app in many ways to
+take advantage of standard web technologies, but for the app to
+communicate closely with various device-level features, you need to
+add plugins that provide access to core Cordova APIs.
+
+A _plugin_ is a bit of add-on code that provides an interface to
+native components. You can design your own plugin interface, for
+example when designing a hybrid app that mixes a Cordova WebView with
+native components. (See Embedding WebViews and Plugin Development
+Guide for details.)  More commonly, you would add a plugin to enable
+one of Cordova's basic device-level features
+detailed in the API Reference. A list of these plugins, including
+additional plugins provided by the community, can be found at
+[plugins.cordova.io](http://plugins.cordova.io/). You can use
+the CLI to search for plugins from this registry. For example,
+searching for `bar` and `code` produces a single result that matches
+both terms as case-insensitive substrings:
+
+        $ cordova plugin search bar code
+
+        com.phonegap.plugins.barcodescanner - Scans Barcodes
+
+Searching for only the `bar` term yields and additional result:
+
+        org.apache.cordova.statusbar - Cordova StatusBar Plugin
+
+The `cordova plugin add` command requires you to specify the
+repository for the plugin code.  Please note that when you follow the 
+Web Project Dev workflow and use the CLI, the CLI will take care of adding
+the plugin code to the appropriate place for each platform. (If you are following the
+Native Project Dev Workflow, you will have to add plugins using Plugman (guide link here),
+multiple times for each platform.)
+
+Here are examples of how you might use the CLI to add features to the app:
+
+* Basic device information (Device API):
+
+        $ cordova plugin add org.apache.cordova.device
+
+* Network Connection and Battery Events:
+
+        $ cordova plugin add org.apache.cordova.network-information
+        $ cordova plugin add org.apache.cordova.battery-status
+
+* Accelerometer, Compass, and Geolocation:
+
+        $ cordova plugin add org.apache.cordova.device-motion
+        $ cordova plugin add org.apache.cordova.device-orientation
+        $ cordova plugin add org.apache.cordova.geolocation
+
+* Camera, Media playback and Capture:
+
+        $ cordova plugin add org.apache.cordova.camera
+        $ cordova plugin add org.apache.cordova.media-capture
+        $ cordova plugin add org.apache.cordova.media
+
+* Access files on device or network (File API):
+
+        $ cordova plugin add org.apache.cordova.file
+        $ cordova plugin add org.apache.cordova.file-transfer
+
+* Notification via dialog box or vibration:
+
+        $ cordova plugin add org.apache.cordova.dialogs
+        $ cordova plugin add org.apache.cordova.vibration
+
+* Contacts:
+
+        $ cordova plugin add org.apache.cordova.contacts
+
+* Globalization:
+
+        $ cordova plugin add org.apache.cordova.globalization
+
+* Splashscreen:
+
+        $ cordova plugin add org.apache.cordova.splashscreen
+
+* Open new browser windows (InAppBrowser):
+
+        $ cordova plugin add org.apache.cordova.inappbrowser
+
+* Debug console:
+
+        $ cordova plugin add org.apache.cordova.console
+
+Use `plugin ls` (or `plugin list`, or `plugin` by itself) to view
+currently installed plugins. Each displays by its identifier:
+
+        $ cordova plugin ls    # or 'plugin list'
+        [ 'org.apache.cordova.console' ]
+
+To remove a plugin, refer to it by the same identifier that appears in
+the listing. For example, here is how you would remove support for a
+debug console from a release version:
+
+        $ cordova plugin rm org.apache.cordova.console
+        $ cordova plugin remove org.apache.cordova.console    # same
+
+You can batch-remove or add plugins by specifying more than one
+argument for each command:
+
+        $ cordova plugin add org.apache.cordova.console org.apache.cordova.device
+
+## Advanced Plugin Options
+
+When adding a plugin, several options allow you to specify from where
+to fetch the plugin. The examples above use a well-known
+`registry.cordova.io` registry, and the plugin is specified by the
+`id`:
+
+        $ cordova plugin add org.apache.cordova.console
+
+The `id` may also include the plugin's version number, appended after
+an `@` character. The `latest` version is an alias for the most recent
+version. For example:
+
+        $ cordova plugin add org.apache.cordova.console@latest
+        $ cordova plugin add org.apache.cordova.console@0.2.1
+
+If the plugin is not registered at `registry.cordova.io` but is located in
+another git repository, you can specify an alternate URL:
+
+        $ cordova plugin add https://github.com/apache/cordova-plugin-console.git
+
+The git example above fetches the plugin from the end of the master
+branch, but an alternate git-ref such as a tag or branch can be
+appended after a `#` character:
+
+        $ cordova plugin add https://github.com/apache/cordova-plugin-console.git#r0.2.0
+
+If the plugin (and its `plugin.xml` file) is in a subdirectory within
+the git repo, you can specify it with a `:` character. Note that the
+`#` character is still needed:
+
+        $ cordova plugin add https://github.com/someone/aplugin.git#:/my/sub/dir
+
+You can also combine both the git-ref and the subdirectory:
+
+        $ cordova plugin add https://github.com/someone/aplugin.git#r0.0.1:/my/sub/dir
+
+Alternately, specify a local path to the plugin directory that
+contains the `plugin.xml` file:
+
+        $ cordova plugin add ../my_plugin_dir
+
+## Using _merges_ to Customize Each Platform
+
+While Cordova allows you to easily deploy an app for many different
+platforms, sometimes you need to add customizations.  In that case,
+you don't want to modify the source files in various `www` directories
+within the top-level `platforms` directory, because they're regularly
+replaced with the top-level `www` directory's cross-platform source.
+
+Instead, the top-level `merges` directory offers a place to specify
+assets to deploy on specific platforms. Each platform-specific
+subdirectory within `merges` mirrors the directory structure of the
+`www` source tree, allowing you to override or add files as needed.
+For example, here is how you might uses `merges` to boost the default
+font size for Android and Amazon Fire OS devices:
+
+* Edit the `www/index.html` file, adding a link to an additional CSS
+  file, `overrides.css` in this case:
+
+        <link rel="stylesheet" type="text/css" href="css/overrides.css" />
+
+* Optionally create an empty `www/css/overrides.css` file, which would
+  apply for all non-Android builds, preventing a missing-file error.
+
+* Create a `css` subdirectory within `merges/android`, then add a
+  corresponding `overrides.css` file. Specify CSS that overrides the
+  12-point default font size specified within `www/css/index.css`, for
+  example:
+
+        body { font-size:14px; }
+
+When you rebuild the project, the Android version features the custom
+font size, while others remain unchanged.
+
+You can also use `merges` to add files not present in the original
+`www` directory. For example, an app can incorporate a _back button_
+graphic into the iOS interface, stored in
+`merges/ios/img/back_button.png`, while the Android version can
+instead capture `backbutton` events from the corresponding hardware
+button.
+
+## Help Commands
+
+Cordova features a couple of global commands, which may help you if
+you get stuck or experience a problem.  The `help` command displays
+all available Cordova commands and their syntax:
+
+    $ cordova help
+    $ cordova        # same
+
+The `info` command produces a listing of potentially useful details,
+such as currently installed platforms and plugins, SDK versions for
+each platform, and versions of the CLI and `node.js`:
+
+    $ cordova info
+
+It both presents the information to screen and captures the output in
+a local `info.txt` file.
+
+__NOTE__: Currently, only details on iOS and Android platforms are
+available.
+
+## Updating Cordova and Your Project
+
+After installing the `cordova` utility, you can always update it to
+the latest version by running the following command:
+
+        $ sudo npm update -g cordova
+
+Use this syntax to install a specific version:
+
+        $ sudo npm install -g cordova@3.1.0
+
+Run `cordova -v` to see which version is currently running.  Run the `npm
+info` command for a longer listing that includes the current version
+along with other available version numbers:
+
+        $ npm info cordova
+
+Cordova 3.0 is the first version to support the command-line interface
+described in this section. If you are updating from a version prior to
+3.0, you need to create a new project as described above, then copy
+the older application's assets into the top-level `www` directory.
+Where applicable, further details about upgrading to 3.0 are available
+in the Platform Guides.  Once you upgrade to the `cordova`
+command-line interface and use `npm update` to stay current, the more
+time-consuming procedures described there are no longer relevant.
+
+Cordova 3.0+ may still require various changes to
+project-level directory structures and other dependencies. After you
+run the `npm` command above to update Cordova itself, you may need to
+ensure your project's resources conform to the latest version's
+requirements. Run a command such as the following for each platform
+you're building:
+
+        $ cordova platform update android
+        $ cordova platform update ios
+        ...etc.
+
diff --git a/docs/en/3.3.0/guide/hybrid/plugins/index.md b/docs/en/3.3.0/guide/hybrid/plugins/index.md
new file mode 100644
index 0000000..b8dd5ea
--- /dev/null
+++ b/docs/en/3.3.0/guide/hybrid/plugins/index.md
@@ -0,0 +1,211 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Plugin Development Guide
+
+A _plugin_ is a package of injected code that allows the Cordova webview within
+which your app renders to communicate with the native platform on
+which it runs.  Plugins provide access to device and platform
+functionality that is ordinarily unavailable to web-based apps.  All
+the main Cordova API features are implemented as plugins, and many
+others are available that enable features such as bar code scanners,
+NFC communication, or to tailor calendar interfaces.
+
+Plugins comprise a single JavaScript interface along with
+corresponding native code libraries for each supported platform.  This
+section steps through a simple _echo_ plugin that passes a string from
+JavaScript to the native platform and back, one that you can use as a
+model to build far more complex features.  This section discusses the
+basic plugin structure and the outward-facing JavaScript interface.
+For each corresponding native interface, see the list at the end of
+this section.
+
+In addition to these instructions, when preparing to write a plugin it
+is best to look over
+[existing plugins](https://github.com/apache/cordova-android/tree/master/framework/src/org/apache/cordova)
+for guidance.
+
+## Building a Plugin
+
+Application developers use the CLI's `plugin add` command (discussed
+in The Command-Line Interface) to apply a plugin to a project. The
+argument to that command is the URL for a _git_ repository containing
+the plugin code.  This example implements Cordova's Device API:
+
+        $ cordova plugin add https://git-wip-us.apache.org/repos/asf/cordova-plugin-device.git
+
+The plugin repository must feature a top-level `plugin.xml` manifest
+file. There are many ways to configure this file, details for which
+are available in the Plugin Specification. This abbreviated version of
+the `Device` plugin provides a simple example to use as a model:
+
+        <?xml version="1.0" encoding="UTF-8"?>
+        <plugin xmlns="http://apache.org/cordova/ns/plugins/1.0"
+                id="org.apache.cordova.device" version="0.2.3">
+            <name>Device</name>
+            <description>Cordova Device Plugin</description>
+            <license>Apache 2.0</license>
+            <keywords>cordova,device</keywords>
+            <js-module src="www/device.js" name="device">
+                <clobbers target="device" />
+            </js-module>
+            <platform name="ios">
+                <config-file target="config.xml" parent="/*">
+                    <feature name="Device">
+                        <param name="ios-package" value="CDVDevice"/>
+                    </feature>
+                </config-file>
+                <header-file src="src/ios/CDVDevice.h" />
+                <source-file src="src/ios/CDVDevice.m" />
+            </platform>
+        </plugin>
+
+The top-level `plugin` tag's `id` attribute uses the same
+reverse-domain format to identify the plugin package as the apps to
+they're added.  The `js-module` tag specifies the path to the common
+JavaScript interface.  The `platform` tag specifies a corresponding
+set of native code, for the `ios` platform in this case.  The
+`config-file` tag encapsulates a `feature` tag that is injected into
+the platform-specific `config.xml` file to make the platform aware of
+the additional code library.  The `header-file` and `source-file` tags
+specify the path to the library's component files.
+
+## Validating a Plugin
+
+You can use the `plugman` utility to check whether the plugin installs
+correctly for each platform.  Install `plugman` with the following
+[node](http://nodejs.org/) command:
+
+        $ npm install -g plugman
+
+You need an valid app source directory, such as the top-level `www`
+directory included in a default CLI-generated project as described in
+The Command-Line Interface.  Make sure the app's `index.html` home
+page reference the name of the plugin's JavaScript interface, as if it
+were in the same source directory:
+
+        <script src="myplugin.js"></script>
+
+Then run a command such as the following to test whether iOS
+dependencies load properly:
+
+        $ plugman -platform ios /path/to/my/project/www /path/to/my/plugin
+
+For details on `plugman` options, see Using Plugman to Manage Plugins.
+For information on how to actually _debug_ plugins, see each
+platform's native interface listed at the bottom of this page.
+
+## The JavaScript Interface
+
+The JavaScript provides the front-facing interface, making it perhaps
+the most important part of the plugin.  You can structure your
+plugin's JavaScript however you like, but you need to call
+`cordova.exec` to communicate with the native platform, using the
+following syntax:
+
+        cordova.exec(function(winParam) {},
+                     function(error) {},
+                     "service",
+                     "action",
+                     ["firstArgument", "secondArgument", 42, false]);
+
+Here is how each parameter works:
+
+- `function(winParam) {}`: A success callback function. Assuming your
+  `exec` call completes successfully, this function executes along
+  with any parameters you pass to it.
+
+- `function(error) {}`: An error callback function. If the operation
+  does not complete successfully, this function executes with an
+  optional error parameter.
+
+- `"service"`: The service name to call on the native side. This
+  corresponds to a native class, for which more information is
+  available in the native guides listed below.
+
+- `"action"`: The action name to call on the native side. This
+  generally corresponds to the native class method. See the native
+  guides listed below.
+
+- `[/* arguments */]`: An array of arguments to pass into the native
+  environment.
+
+## Sample JavaScript
+
+This example shows one way to implement the plugin's JavaScript
+interface:
+
+        window.echo = function(str, callback) {
+            cordova.exec(callback, function(err) {
+                callback('Nothing to echo.');
+            }, "Echo", "echo", [str]);
+        };
+
+In this example, the plugin attaches itself to the `window` object as
+the `echo` function, which plugin users would call as follows:
+
+        window.echo("echome", function(echoValue) {
+            alert(echoValue == "echome"); // should alert true.
+        });
+
+Look at the last three arguments to the `cordova.exec` function. The
+first calls the `Echo` _service_, a class name. The second requests
+the `echo` _action_, a method within that class. The third is an array
+of arguments containing the echo string, which is the `window.echo`
+function's the first parameter.
+
+The success callback passed into `exec` is simply a reference to the
+callback function `window.echo` takes. If the native platform fires
+the error callback, it simply calls the success callback and passes it
+a default string.
+
+## Native Interfaces
+
+Once you define JavaScript for your plugin, you need to complement it
+with at least one native implementation. Details for each platform are
+listed below, and each builds on the simple Echo Plugin example above:
+
+- Amazon Fire OS Plugins
+- Android Plugins
+- iOS Plugins
+- BlackBerry 10 Plugins
+- Windows Phone Plugins
+
+The Tizen platform does not support plugins.
+
+## Publishing Plugins
+
+Once you develop your plugin, you may want to publish and share it
+with the community. You can publish your plugin to the cordova
+registry (based on [`npmjs`](https://github.com/isaacs/npmjs.org)) or
+to any other `npmjs`-based registry. Other developers can install it
+automatically using either `plugman` or the Cordova CLI.  (For details
+on each development path, see Using Plugman to Manage Plugins and The
+Command-Line Interface.)
+
+To publish a plugin you need to use the `plugman` tool and go through
+the following steps:
+
+    $ plugman adduser # that is if you don't have an account yet
+    $ plugman publish /path/to/your/plugin
+    
+That is it!
+
+Running `plugman --help` lists other available registry-based
+commands.
diff --git a/docs/en/3.3.0/guide/hybrid/webviews/index.md b/docs/en/3.3.0/guide/hybrid/webviews/index.md
new file mode 100644
index 0000000..e08b25b
--- /dev/null
+++ b/docs/en/3.3.0/guide/hybrid/webviews/index.md
@@ -0,0 +1,36 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Embedding WebViews
+
+Cordova applications are ordinarily implemented as a browser-based
+_WebView_ within the native mobile platform. This section shows how,
+for supporting platforms, to create your own WebView components that
+make full use of Cordova APIs. You can then deploy these Cordova
+application components along with native components in a hybrid
+application.
+
+To deploy a WebView, you need to be familiar with each native
+programming environment. The following provides instructions for
+supported platforms:
+
+- Amazon Fire OS WebViews
+- Android WebViews
+- iOS WebViews
+
diff --git a/docs/en/3.3.0/guide/overview/index.md b/docs/en/3.3.0/guide/overview/index.md
new file mode 100644
index 0000000..b33e9f5
--- /dev/null
+++ b/docs/en/3.3.0/guide/overview/index.md
@@ -0,0 +1,139 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+
+---
+
+# Overview
+
+Cordova is an open-source mobile development framework. It allows you
+to use standard web technologies such as HTML5, CSS3, and JavaScript
+for cross-platform development, avoiding each mobile platforms' native
+development language.  Applications execute within wrappers targeted
+to each platform, and rely on standards-compliant API bindings to
+access each device's sensors, data, and network status.
+
+Use Cordova if you are:
+
+* a mobile developer and want to extend an application across more
+  than one platform, without having to re-implement it with each
+  platform's language and tool set.
+
+* a web developer and want to deploy a web app that's packaged for
+  distribution in various app store portals.
+
+* a mobile developer interested in mixing native application
+  components with a _WebView_ (browser window) that can access
+  device-level APIs, or if you want to develop a plugin interface
+  between native and WebView components.
+
+## Basic Components
+
+Cordova applications rely on a common `config.xml` file that provides
+information about the app and specifies parameters affecting how it
+works, such as whether it responds to orientation shifts. This file
+adheres to the W3C's
+[Packaged Web App](http://www.w3.org/TR/widgets/),
+or _widget_, specification.
+
+The application itself is implemented as a web page, named
+_index.html_ by default, that references whatever CSS, JavaScript,
+images, media files, or other resources are necessary for it to run.
+The app executes as a _WebView_ within the native application wrapper,
+which you distribute to app stores.  For the web app to interact with
+various device features the way native apps do, it must also reference
+a `cordova.js` file, which provides API bindings.
+
+The Cordova-enabled WebView may provide the application with its
+entire user interface. It can also be a component within a larger,
+hybrid application that mixes the WebView with native application
+components.  Cordova provides a _plugin_ interface for these
+components to communicate with each other.
+
+## Development Paths
+
+As of version 3.0, you can use two basic workflows to create
+a mobile application. While you can accomplish the same
+thing using both workflows, certain tasks are better suited to using one workflow 
+over the other. For this reason, you should understand both workflows so
+that you can use the best tool for the best situation.
+
+The two main workflows that are supported are the _Web Project Dev_ workflow and the _Native Platform Dev_ workflow.
+
+### Web Project Dev
+
+You can think of the first workflow as the _Web Project Dev_ workflow. You should use
+this workflow when you want to create a Cordova application that runs on 
+as many mobile operating systems as possible with as little platform-specific
+development work as possible. This workflow came into existence with Cordova 3.0
+and the creation of the Cordova _Command-line Interface_ (CLI). The CLI abstracts
+away a lot of the functionality of lower-level shell scripts that take care of the
+details involved with building your app, such as copying your web assets into 
+the correct folders for each mobile platform, making platform specific configuration
+changes, or running specific build scripts to generate application binaries. You can read 
+more about the _Web Project Dev_ workflow in The Command-line Interface. Please note
+that often when people speak of the "CLI," they are talking about this _Web Project Dev_
+workflow.
+
+### Native Platform Dev
+
+The second workflow can be thought of as a _Native Platform Dev_ workflow. You should use it
+when you want to focus on building an application for a single platform and are 
+interested in changing the lower-level platform details. While you can still use this workflow
+to build cross-platform apps, the lack of tools to abstract away the various build steps will
+make it more difficult. For example, you will have to use Plugman to
+install the same plugin once for each platform that you want to support. The 
+benefit to using this _Native Platform Dev_ workflow is that it gives you access to the lower-level
+shell scripts to build and test the application, so if you are hacking on the native 
+side of things, this workflow is the most efficient way to test your changes. This workflow
+is also appropriate if you want to use the CordovaWebView as a small part in a larger native
+application (See the Embedding WebViews guide.)  You can read about this workflow in the different
+Shell Tool guides, for instance, Android Shell Tool Guide and iOS Shell Tool Guide.
+
+When first starting out, it might be easiest to use the _Web Project Dev_ workflow
+to create an application. (To install the CLI, see The Command-line Interface.)
+Depending on the set of platforms you wish to target, you can rely on
+the CLI for progressively greater shares of the development cycle:
+
+* In the most basic scenario, you can use the CLI simply to create a
+  new project that is populated with default configuration for you to
+  modify.
+
+* For many mobile platforms, you can also use the CLI to set up
+  additional project files required to compile within each SDK.  For
+  this to work, you must install each targeted platform's SDK.
+  (See the Platform Guides for instructions.)
+  As indicated in the Platform Support table, you may need to
+  run the CLI on different operating systems depending on the targeted
+  platform.
+
+* For supporting platforms, the CLI can compile executible
+  applications and run them in an SDK-based device emulator.
+  For comprehensive testing, you can also generate application files
+  and install them directly on a device.
+
+At any point in the development cycle, you can switch to using more of the _Native Platform
+Dev_ workflow. The platform-specific SDK tools provided may provide a richer set of
+options. (See the Platform Guides for details about each platform's SDK tool set.)
+
+An SDK environment is more appropriate if you want implement a hybrid
+app that mixes web-based and native application components.
+You may use the command-line utility to initially generate the app, or
+iteratively thereafter to feed updated code to SDK tools.  You may
+also build the app's configuration file yourself.
+(See The config.xml File for details.)
+
diff --git a/docs/en/3.3.0/guide/platforms/amazonfireos/config.md b/docs/en/3.3.0/guide/platforms/amazonfireos/config.md
new file mode 100644
index 0000000..436d292
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/amazonfireos/config.md
@@ -0,0 +1,66 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Amazon Fire OS Configuration
+
+The `config.xml` file controls an app's basic settings that apply
+across each application and CordovaWebView instance. This section
+details preferences that only apply to  Amazon Fire OS builds. See The
+config.xml File for information on global configuration options.
+
+- `KeepRunning` (boolean, defaults to `true`): Determines whether the
+  application stays running in the background even after a `pause`
+  event fires.
+
+        <preference name="KeepRunning" value="false"/>
+
+- `ErrorUrl`: Specifies an error page that displays in response to
+  standard HTTP errors in the 400-500 range. Place the specified file
+  in the top-level directory containing the home page and other web
+  assets.
+
+        <preference name="ErrorUrl" value="error.html"/>
+
+- `LoadingDialog`: Display a native dialog when loading the app. The
+  value's format is _Title, Message_
+
+        <preference name="LoadingDialog" value="Please wait, the app is loading"/>
+
+- `LoadingPageDialog`: Display a native dialog when loading sub-pages
+  within an app. The value's format is _Title, Message_
+
+        <preference name="LoadingPageDialog" value="Please wait, the data is loading"/>
+
+- `LoadUrlTimeoutValue` (number, default is `20000`): When loading a
+  page, the amount of time to wait before throwing a timeout error.
+  This example specifies 10 seconds rather than 20:
+
+        <preference name="LoadUrlTimeoutValue" value="10000"/>
+
+- `SplashScreen`: The name of the file minus its extension in the
+  `res/drawable` directory.  Various assets must share this common
+  name in various subdirectories.
+
+        <preference name="SplashScreen" value="splash"/>
+
+- `SplashScreenDelay` (number, defaults to `5000`): The amount of
+  time the splash screen image displays.
+
+        <preference name="SplashScreenDelay" value="10000"/>
+
diff --git a/docs/en/3.3.0/guide/platforms/amazonfireos/index.md b/docs/en/3.3.0/guide/platforms/amazonfireos/index.md
new file mode 100644
index 0000000..6c71051
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/amazonfireos/index.md
@@ -0,0 +1,145 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Amazon Fire OS Platform Guide
+
+This guide shows how to set up your SDK development environment to
+deploy Cordova apps for Amazon Fire OS devices, such as the Kindle Fire HDX.
+
+See the following for more detailed platform-specific information:
+
+* Amazon Fire OS Configuration
+* Amazon Fire OS WebViews
+* Amazon Fire OS Plugins
+
+## Requirements and Support
+
+Developing Cordova apps for Amazon Fire OS requires the Android SDK and the Amazon WebView SDK. Check the requirements for these SDKs at the links below:
+
+* [Android SDK System](http://developer.android.com/sdk/)
+
+* [Amazon WebView SDK](https://developer.amazon.com/sdk/fire/IntegratingAWV.html#installawv)
+
+## Installation
+
+
+### Android SDK
+
+Install the Android SDK from
+[developer.android.com/sdk](http://developer.android.com/sdk/).  You
+may be presented with a choice of where to install the SDK, otherwise
+move the downloaded `adt-bundle` tree to wherever you store
+development tools.
+
+For Cordova command-line tools to work, you need to include the SDK's
+`tools` and `platform-tools` directories in your PATH environment.
+
+On Mac, Linux or other Unix-like platforms, you can use a text editor to create or modify the
+`~/.bash_profile` file, adding a line such as the following, depending
+on where the SDK installs:
+
+    export PATH=${PATH}:/Development/adt-bundle/sdk/platform-tools:/Development/adt-bundle/sdk/tools
+
+This exposes SDK tools in newly opened terminal windows. Otherwise run
+this to make them available in the current session:
+
+    $ source ~/.bash_profile
+
+To modify the PATH environment on Windows 7:
+
+* Click on the __Start__ menu in the lower-left corner of the desktop,
+  right-click on __Computer__, then click __Properties__.
+
+* Click __Advanced System Settings__ in the column on the left.
+
+* In the resulting dialog box, press __Environment Variables__.
+
+* Select the __PATH__ variable and press __Edit__.
+
+* Append the following to the PATH based on where you installed the
+  SDK, for example:
+
+        ;C:\Development\adt-bundle\sdk\platform-tools;C:\Development\adt-bundle\sdk\tools
+
+* Save the value and close both dialog boxes.
+
+You may also need to enable Java and Ant. Open a command prompt and
+type `java`, and also type `ant`. Append to the PATH whichever fail to
+run:
+
+    ;%JAVA_HOME%\bin;%ANT_HOME%\bin
+
+### Amazon WebView SDK
+
+Download the Amazon WebView SDK from the [Amazon Developer Portal](https://developer.amazon.com/sdk/fire/IntegratingAWV.html#installawv).
+
+* Create a `libs/` folder in `~/.cordova/lib/amazon-fireos/cordova/3.1.0/` folder.
+* Add the `awv_interface.jar` from the downloaded SDK to  `~/.cordova/lib/amazon-fireos/cordova/3.1.0/libs/`
+
+
+## Open a Project in the SDK
+
+Use the `cordova` utility to set up a new project, as described in The
+Cordova The Command-line Interface. For example, in a source-code directory:
+
+    $ cordova create hello com.example.hello "HelloWorld"
+    $ cd hello
+    $ cordova platform add amazon-fireos
+    $ cordova build
+
+Once created, here's how to use the SDK to modify it:
+
+* Launch the __Eclipse__ application.
+
+* Select the __New Project__ menu item.
+
+* Choose __Android Project from Existing Code__ from the resulting dialog box, and press __Next__:
+    ![](img/guide/platforms//eclipse_new_project.png)
+
+* Navigate to `hello`, or whichever directory you created for the project, then to the `platforms/amazon-fireos` subdirectory.
+
+* Press __Finish__.
+
+Once the Eclipse window opens, a red __X__ may appear to indicate
+unresolved problems. If so, follow these additional steps:
+
+* Right-click on the project directory.
+
+* In the resulting __Properties__ dialog, select __Android__ from the navigation pane.
+
+* For the project build target, select the highest Android API level you have installed.
+
+* Click __OK__.
+
+* Select __Clean__ from the __Project__ menu. This should correct all the errors in the project.
+
+## Deploy to Device
+
+To push an app directly to the device, make sure USB debugging is enabled on your device as described on the
+[Android Developer Site](http://developer.android.com/tools/device.html),
+and use a mini USB cable to plug it into your system.
+
+You can push the app to the device from the command line:
+
+    $ cordova run amazon-fireos
+
+Alternately within Eclipse, right-click the project and choose __Run
+As &rarr; Android Application__.
+
+__Note__: Currently, testing via an emulator is not supported for Amazon WebView based apps.
diff --git a/docs/en/3.3.0/guide/platforms/amazonfireos/plugin.md b/docs/en/3.3.0/guide/platforms/amazonfireos/plugin.md
new file mode 100644
index 0000000..3fc5ca9
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/amazonfireos/plugin.md
@@ -0,0 +1,100 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Amazon Fire OS Plugins
+
+Follow the instructions provided in the Android Plugins Guide for an overview of developing custom plugins.
+
+## Echo Amazon Fire OS Plugin Example
+
+To match the JavaScript interface's _echo_ feature described in
+Application Plugins, use the `plugin.xml` to inject a `feature`
+specification to the local platform's `config.xml` file:
+
+    <platform name="amazon-fireos">
+        <config-file target="config.xml" parent="/*">
+            <feature name="Echo">
+                <param name="android-package" value="org.apache.cordova.plugin.Echo"/>
+            </feature>
+        </config-file>
+    </platform>
+
+Then add the following to the
+`src/org/apache/cordova/plugin/Echo.java` file:
+
+    package org.apache.cordova.plugin;
+
+    import org.apache.cordova.CordovaPlugin;
+    import org.apache.cordova.CallbackContext;
+
+    import org.json.JSONArray;
+    import org.json.JSONException;
+    import org.json.JSONObject;
+
+    /**
+     * This class echoes a string called from JavaScript.
+     */
+    public class Echo extends CordovaPlugin {
+
+        @Override
+        public boolean execute(String action, JSONArray args, CallbackContext callbackContext) throws JSONException {
+            if (action.equals("echo")) {
+                String message = args.getString(0);
+                this.echo(message, callbackContext);
+                return true;
+            }
+            return false;
+        }
+
+        private void echo(String message, CallbackContext callbackContext) {
+            if (message != null && message.length() > 0) {
+                callbackContext.success(message);
+            } else {
+                callbackContext.error("Expected one non-empty string argument.");
+            }
+        }
+    }
+
+If you want to reuse Android Plugin code for the Amazon Fire OS platform then modify the plugin.xml to point to the `android` specific source file. For example,
+
+    <platform name="amazon-fireos">
+        <config-file target="config.xml" parent="/*">
+            <feature name="Echo">
+                <param name="android-package" value="org.apache.cordova.plugin.Echo"/>
+            </feature>
+        </config-file>
+        <source-file src="src/android/Echo.java" target-dir="src/org/apache/cordova/plugin" />
+    </platform>
+
+If you want to write a customized plugin for the Amazon Fire OS platform then create a folder named `amazon` under your plugin src/ folder and modify the plugin.xml to point to the `amazon` specific source file. For example,
+
+    <platform name="amazon-fireos">
+        <config-file target="config.xml" parent="/*">
+            <feature name="Echo">
+                <param name="android-package" value="org.apache.cordova.plugin.Echo"/>
+            </feature>
+        </config-file>
+        <source-file src="src/amazon/Echo.java" target-dir="src/org/apache/cordova/plugin" />
+    </platform>
+
+## Using Amazon WebView in your plugin
+
+Cordova for Amazon Fire OS makes use of custom Amazon WebView that is built on the open-source Chromium project. It is GPU accelerated and optimized for fluid performance on Kindle Fire.
+
+To understand how to best use Amazon WebView in your project, check out the [Amazon Developer Portal](https://developer.amazon.com/sdk/fire/IntegratingAWV.html).
diff --git a/docs/en/3.3.0/guide/platforms/amazonfireos/webview.md b/docs/en/3.3.0/guide/platforms/amazonfireos/webview.md
new file mode 100644
index 0000000..f02bc84
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/amazonfireos/webview.md
@@ -0,0 +1,113 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Amazon Fire OS WebViews
+
+Beginning with 3.0.0, you can use Cordova as a component in Amazon Fire OS applications. Amazon Fire OS refers to this component as `CordovaWebView`. `CordovaWebView` extends Amazon WebView that is built on the open source Chromium Project. By leveraging this feature, your web apps can utilize the latest HTML5 web standards running in a modern web runtime engine.
+
+## Prerequisites
+
+* Cordova 3.0.0 or greater
+
+* Android SDK updated to the latest SDK
+
+* Amazon WebView SDK
+
+## Guide to using CordovaWebView in a Amazon Fire OS Project
+
+1. Download and expand the [Amazon WebView SDK](https://developer.amazon.com/sdk/fire/IntegratingAWV.html#installawv) , then copy the awv_interface.jar into `/framework/libs` directory. Create a libs/ folder if it doesn't exist.
+
+2. `cd` into `/framework` and run `ant jar` to build the cordova jar. It creates the .jar file formed as `cordova-3.3.0.jar` in the `/framework` directory.
+
+3. Edit your application's `main.xml` file (under `/res/layout`) to look like the following, with the `layout_height`, `layout_width` and `id` modified to suit your application:
+
+        <org.apache.cordova.CordovaWebView
+            android:id="@+id/tutorialView"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+
+4. Modify your activity so that it implements the `CordovaInterface`.  You should implement the included methods.  You may wish to copy them from `/framework/src/org/apache/cordova/CordovaActivity.java`, or implement them on your own.  The code fragment below shows a basic application that uses the interface. Note how the referenced view id matches the `id` attribute specified in the XML fragment shown above:
+
+        public class CordovaViewTestActivity extends Activity implements CordovaInterface {
+            CordovaWebView cwv;
+            /* Called when the activity is first created. */
+            @Override
+            public void onCreate(Bundle savedInstanceState) {
+                super.onCreate(savedInstanceState);
+                setContentView(R.layout.main);
+                cwv = (CordovaWebView) findViewById(R.id.tutorialView);
+                Config.init(this);
+                cwv.loadUrl(Config.getStartUrl());
+            }
+
+If you use the camera, you should also implement this:
+
+        @Override
+        public void setActivityResultCallback(CordovaPlugin plugin) {
+            this.activityResultCallback = plugin;
+        }
+        /**
+         * Launch an activity for which you would like a result when it finished. When this activity exits,
+         * your onActivityResult() method is called.
+         *
+         * @param command           The command object
+         * @param intent            The intent to start
+         * @param requestCode       The request code that is passed to callback to identify the activity
+         */
+        public void startActivityForResult(CordovaPlugin command, Intent intent, int requestCode) {
+            this.activityResultCallback = command;
+            this.activityResultKeepRunning = this.keepRunning;
+
+            // If multitasking turned on, then disable it for activities that return results
+            if (command != null) {
+                this.keepRunning = false;
+            }
+
+            // Start activity
+            super.startActivityForResult(intent, requestCode);
+        }
+
+        @Override
+        /**
+         * Called when an activity you launched exits, giving you the requestCode you started it with,
+         * the resultCode it returned, and any additional data from it.
+         *
+         * @param requestCode       The request code originally supplied to startActivityForResult(),
+         *                          allowing you to identify who this result came from.
+         * @param resultCode        The integer result code returned by the child activity through its setResult().
+         * @param data              An Intent, which can return result data to the caller (various data can be attached to Intent "extras").
+         */
+        protected void onActivityResult(int requestCode, int resultCode, Intent intent) {
+            super.onActivityResult(requestCode, resultCode, intent);
+            CordovaPlugin callback = this.activityResultCallback;
+            if (callback != null) {
+                callback.onActivityResult(requestCode, resultCode, intent);
+            }
+        }
+
+Finally, remember to add the thread pool, otherwise the plugins have no threads to run on:
+
+        @Override
+        public ExecutorService getThreadPool() {
+            return threadPool;
+        }
+
+6. Copy your application's HTML and JavaScript files to your Amazon Fire OS project's `/assets/www` directory.
+
+7. Copy `config.xml` from `/framework/res/xml` to your project's `/res/xml` directory.
diff --git a/docs/en/3.3.0/guide/platforms/android/config.md b/docs/en/3.3.0/guide/platforms/android/config.md
new file mode 100644
index 0000000..f8c6d80
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/android/config.md
@@ -0,0 +1,55 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Android Configuration
+
+The `config.xml` file controls an app's basic settings that apply
+across each application and CordovaWebView instance. This section
+details preferences that only apply to Android builds. See The
+config.xml File for information on global configuration options.
+
+- `KeepRunning` (boolean, defaults to `true`): Determines whether the
+  application stays running in the background even after a `pause`
+  event fires. Note: setting this to false will not kill the app after
+  a pause event, it will only halt execution of code in the cordova
+  webview while the app is in the background.
+
+        <preference name="KeepRunning" value="false"/>
+
+- `LoadUrlTimeoutValue` (number, default to `20000`, 20 seconds): When loading a
+  page, the amount of time to wait before throwing a timeout error.
+  This example specifies 10 seconds rather than 20:
+
+        <preference name="LoadUrlTimeoutValue" value="10000"/>
+
+- `SplashScreen`: The name of the file minus its extension in the
+  `res/drawable` directory.  Various assets must share this common
+  name in various subdirectories.
+
+        <preference name="SplashScreen" value="splash"/>
+
+- `SplashScreenDelay` (number, defaults to `5000`): The amount of
+  time the splash screen image displays.
+
+        <preference name="SplashScreenDelay" value="10000"/>
+
+- `InAppBrowserStorageEnabled` (boolean, defaults to `true`): Controls
+  whether pages opened within an InAppBrowser can access the same
+  localStorage and WebSQL storage as pages opened with the default
+  browser.
diff --git a/docs/en/3.3.0/guide/platforms/android/index.md b/docs/en/3.3.0/guide/platforms/android/index.md
new file mode 100644
index 0000000..039294b
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/android/index.md
@@ -0,0 +1,217 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Android Platform Guide
+
+This guide shows how to set up your SDK development environment to
+deploy Cordova apps for Android devices. It walks you through the process
+of installing the Android SDK, opening an Android project in Eclipse SDK, 
+and deploying to an emulator or device. You will need to follow this guide 
+to at least Install the Android SDK, regardless of which workflow you
+are following. (Both the _Web Project Dev_ and _Native Platform Dev_ workflows
+require the Android SDK to be installed and accessable via your PATH.)
+
+See the following for more detailed platform-specific information:
+
+* Android Configuration
+* Android WebViews
+* Android Plugins
+* Upgrading Android
+* Android Command-line Tools
+
+The command-line tools above refer to versions prior to Cordova 3.0.
+See The Command-Line Interface for information about the
+current interface.
+
+## Requirements and Support
+
+See the [System Requirements](http://developer.android.com/sdk/index.html)
+for the Android SDK.
+
+Cordova supports Android 2.2, 2.3, and 4.x.  As a general rule,
+platforms are deprecated as they dip below 5% on Google's
+[distribution dashboard](http://developer.android.com/about/dashboards/index.html).
+
+<!--
+NOTE, doc said:
+- Android 2.1 (Deprecated May 2013)
+- Android 3.x (Deprecated May 2013)
+-->
+
+Developers should use the `cordova` utility in conjunction with
+the Android SDK.  See The Command-Line Interface for
+information how to install it, add projects, then build and deploy a
+project.
+
+Install the Android SDK from
+[developer.android.com/sdk](http://developer.android.com/sdk/). The android sdk
+is distributed as an 'adt-bundle-<os>-<arch>-<ver>' file.
+On windows, the adt-bundle is packaged with an installer.
+On OSX and Linux, simply unpack the 'adt-bundle' in the location you store development tools. 
+[More detailed information on Android SDK setup can be found here](http://developer.android.com/sdk/installing/bundle.html)
+
+
+For Cordova command-line tools to work, you need to include the SDK's
+`tools` and `platform-tools` directories in your PATH environment.  On
+Mac, you can use a text editor to create or modify the
+`~/.bash_profile` file, adding a line such as the following, depending
+on where the SDK installs:
+
+    export PATH=${PATH}:/Development/adt-bundle/sdk/platform-tools:/Development/adt-bundle/sdk/tools
+
+This exposes SDK tools in newly opened terminal windows. Otherwise run
+this to make them available in the current session:
+
+    $ source ~/.bash_profile
+
+To modify the PATH environment on Windows 7:
+
+* Click on the __Start__ menu in the lower-left corner of the desktop,
+  right-click on __Computer__, then click __Properties__.
+
+* Click __Advanced System Settings__ in the column on the left.
+
+* In the resulting dialog box, press __Environment Variables__.
+
+* Select the __PATH__ variable and press __Edit__.
+
+* Append the following to the PATH based on where you installed the
+  SDK, for example:
+
+        ;C:\Development\adt-bundle\sdk\platform-tools;C:\Development\adt-bundle\sdk\tools
+
+* Save the value and close both dialog boxes.
+
+You may also need to enable Java and Ant. Open a command prompt and
+type `java`, and also type `ant`. Append to the PATH whichever fail to
+run:
+
+        ;%JAVA_HOME%\bin;%ANT_HOME%\bin
+
+## Open a Project in the SDK
+
+Use the `cordova` utility to set up a new project, as described in The
+Cordova The Command-Line Interface. For example, in a source-code directory:
+
+        $ cordova create hello com.example.hello "HelloWorld"
+        $ cd hello
+        $ cordova platform add android
+        $ cordova build
+
+Once created, here's how to use the SDK to modify it:
+
+* Launch the __Eclipse__ application.
+
+* Select the __New Project__ menu item.
+
+* Choose __Android Project from Existing Code__ from the resulting dialog box, and press __Next__:
+    ![](img/guide/platforms/android/eclipse_new_project.png)
+
+* Navigate to `hello`, or whichever directory you created for the project, then to the `platforms/android` subdirectory.
+
+* Press __Finish__.
+
+Once the Eclipse window opens, a red __X__ may appear to indicate
+unresolved problems. If so, follow these additional steps:
+
+* Right-click on the project directory.
+
+* In the resulting __Properties__ dialog, select __Android__ from the navigation pane.
+
+* For the project build target, select the highest Android API level you have installed.
+
+* Click __OK__.
+
+* Select __Clean__ from the __Project__ menu. This should correct all the errors in the project.
+
+## Deploy to Emulator
+
+You can use the `cordova` utility to run an app in an emulator, or you
+can run it within the SDK.  Either way, the SDK must first be
+configured to display at least one device. To do so, use the Android
+SDK Manager, a Java application that runs separately from Eclipse.
+There are two ways to open it:
+
+* Run `android` on the command line.
+
+* From within Eclipse, press this toolbar icon:
+
+  ![](img/guide/platforms/android/eclipse_android_sdk_button.png)
+
+Once open, the Android SDK Manager displays various runtime libraries:
+
+![](img/guide/platforms/android/asdk_window.png)
+
+Choose __Tools &rarr; Manage AVDs__ (Android Virtual Devices), then
+choose any item from __Device Definitions__ in the resulting dialog
+box:
+
+![](img/guide/platforms/android/asdk_device.png)
+
+Press __Create AVD__, optionally modifying the name, then press __OK__
+to accept the changes:
+
+![](img/guide/platforms/android/asdk_newAVD.png)
+
+The AVD then appears in the __Android Virtual Devices__ list:
+
+![](img/guide/platforms/android/asdk_avds.png)
+
+To open the emulator as a separate application, select the AVD and
+press __Start__. It launches much as it would on the device, with
+additional controls available for hardware buttons:
+
+![](img/guide/platforms/android/asdk_emulator.png)
+
+At this point you can use the `cordova` utility to deploy the
+application to the emulator from the command line:
+
+        $ cordova emulate android
+
+If instead you work within Eclipse, right-click the project and
+choose __Run As &rarr; Android Application__. You may be asked to
+specify an AVD if none are already open.
+
+For a faster experience, use an Intel-based emulator image:
+
+* Install one or more `Intel x86 Atom` System Images as well as the
+  `Intel Hardware Accelerated Execution Manager`, available under
+  __Extras__.
+
+* Run the Intel installer, which is available within your Android SDK
+  at `extras/intel/Hardware_Accelerated_Execution_Manager`.
+
+* Create a new AVD with the target set to an Intel image.
+
+* When starting the emulator, ensure there are no error messages
+  indicating a failure to load HAX modules.
+
+## Deploy to Device
+
+To push an app directly to the device, make sure USB debugging is
+enabled on your device as described on the
+[Android Developer Site](http://developer.android.com/tools/device.html),
+and use a mini USB cable to plug it into your system.
+
+You can push the app to the device from the command line:
+
+        $ cordova run android
+
+Alternately within Eclipse, right-click the project and choose __Run
+As &rarr; Android Application__.
diff --git a/docs/en/3.3.0/guide/platforms/android/plugin.md b/docs/en/3.3.0/guide/platforms/android/plugin.md
new file mode 100644
index 0000000..77902fc
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/android/plugin.md
@@ -0,0 +1,220 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Android Plugins
+
+This section provides details for how to implement native plugin code
+on the Android platform. Before reading this, see Application Plugins
+for an overview of the plugin's structure and its common JavaScript
+interface. This section continues to demonstrate the sample _echo_
+plugin that communicates from the Cordova webview to the native
+platform and back.  For another sample, see also the comments in
+[CordovaPlugin.java](https://github.com/apache/cordova-android/blob/master/framework/src/org/apache/cordova/CordovaPlugin.java).
+
+Android plugins are based on Cordova-Android, which consists of an
+Android WebView with hooks attached to it.  Plugins are represented as
+class mappings in the `config.xml` file.  A plugin consists of at
+least one Java class that extends the `CordovaPlugin` class,
+overriding one of its `execute` methods. As best practice, the plugin
+should also handle `pause` and `resume` events, along with any message
+passing between plugins.  Plugins with long-running requests,
+background activity such as media playback, listeners, or internal
+state should implement the `onReset()` method as well. It executes
+when the `WebView` navigates to a new page or refreshes, which reloads
+the JavaScript.
+
+## Plugin Class Mapping
+
+The plugin's JavaScript interface uses the `cordova.exec` method as
+follows:
+
+        exec(<successFunction>, <failFunction>, <service>, <action>, [<args>]);
+
+This marshals a request from the WebView to the Android native side,
+effectively calling the `action` method on the `service` class, with
+additional arguments passed in the `args` array.
+
+Whether you distribute a plugin as Java file or as a _jar_ file of its
+own, the plugin must be specified in your Cordova-Android
+application's `res/xml/config.xml` file. See Application Plugins for
+more information on how to use the `plugin.xml` file to inject this
+`feature` element:
+
+        <feature name="<service_name>">
+            <param name="android-package" value="<full_name_including_namespace>" />
+        </feature>
+
+The service name matches the one used in the JavaScript `exec` call.
+The value is the Java class's fully qualified namespace identifier.
+Otherwise, the plugin may compile but still be unavailable to Cordova.
+
+## Writing an Android Java Plugin
+
+A JavaScript call fires off a plugin request to the native side, and
+the correspoinding Java plugin is mapped properly in the `config.xml`
+file, but what does the final Android Java Plugin class look like?
+Whatever is dispatched to the plugin with JavaScript's `exec` function
+is passed into the plugin class's `execute` method. Most `execute`
+implementations look like this:
+
+        @Override
+        public boolean execute(String action, JSONArray args, CallbackContext callbackContext) throws JSONException {
+            if ("beep".equals(action)) {
+                this.beep(args.getLong(0));
+                callbackContext.success();
+                return true;
+            }
+            return false;  // Returning false results in a "MethodNotFound" error.
+        }
+
+The JavaScript `exec` function's `action` parameter corresponds to a
+private class method to dispatch with optional parameters.
+
+When catching exceptions and returning errors, it's important for the
+sake of clarity that errors returned to JavaScript match Java's
+exception names as much as possible.
+
+## Threading
+
+The plugin's JavaScript does _not_ run in the main thread of the
+`WebView` interface; instead, it runs on the `WebCore` thread, as
+does the `execute` method.  If you need to interact with the user
+interface, you should use the following variation:
+
+        @Override
+        public boolean execute(String action, JSONArray args, final CallbackContext callbackContext) throws JSONException {
+            if ("beep".equals(action)) {
+                final long duration = args.getLong(0);
+                cordova.getActivity().runOnUiThread(new Runnable() {
+                    public void run() {
+                        ...
+                        callbackContext.success(); // Thread-safe.
+                    }
+                });
+                return true;
+            }
+            return false;
+        }
+
+Use the following if you do not need to run on the main interface's
+thread, but do not want to block the `WebCore` thread either:
+
+        @Override
+        public boolean execute(String action, JSONArray args, final CallbackContext callbackContext) throws JSONException {
+            if ("beep".equals(action)) {
+                final long duration = args.getLong(0);
+                cordova.getThreadPool().execute(new Runnable() {
+                    public void run() {
+                        ...
+                        callbackContext.success(); // Thread-safe.
+                    }
+                });
+                return true;
+            }
+            return false;
+        }
+
+## Echo Android Plugin Example
+
+To match the JavaScript interface's _echo_ feature described in
+Application Plugins, use the `plugin.xml` to inject a `feature`
+specification to the local platform's `config.xml` file:
+
+        <platform name="android">
+            <config-file target="config.xml" parent="/*">
+                <feature name="Echo">
+                    <param name="android-package" value="org.apache.cordova.plugin.Echo"/>
+                </feature>
+            </config-file>
+        </platform>
+
+Then add the following to the
+`src/org/apache/cordova/plugin/Echo.java` file:
+
+        package org.apache.cordova.plugin;
+
+        import org.apache.cordova.CordovaPlugin;
+        import org.apache.cordova.CallbackContext;
+
+        import org.json.JSONArray;
+        import org.json.JSONException;
+        import org.json.JSONObject;
+
+        /**
+         * This class echoes a string called from JavaScript.
+         */
+        public class Echo extends CordovaPlugin {
+
+            @Override
+            public boolean execute(String action, JSONArray args, CallbackContext callbackContext) throws JSONException {
+                if (action.equals("echo")) {
+                    String message = args.getString(0);
+                    this.echo(message, callbackContext);
+                    return true;
+                }
+                return false;
+            }
+
+            private void echo(String message, CallbackContext callbackContext) {
+                if (message != null && message.length() > 0) {
+                    callbackContext.success(message);
+                } else {
+                    callbackContext.error("Expected one non-empty string argument.");
+                }
+            }
+        }
+
+The necessary imports at the top of the file extends the class from
+`CordovaPlugin`, whose `execute()` method it overrides to receive
+messages from `exec()`.  The `execute()` method first tests the value
+of `action`, for which in this case there is only one valid `echo`
+value.  Any other action returns `false` and results in an
+`INVALID_ACTION` error, which translates to an error callback invoked
+on the JavaScript side.
+
+Next, the method retrieves the echo string using the `args` object's
+`getString` method, specifying the first parameter passed to the
+method.  After the value is passed to a private `echo` method, it is
+parameter-checked to make sure it is not `null` or an empty string, in
+which case `callbackContext.error()` invokes JavaScript's error
+callback.  If the various checks pass, the `callbackContext.success()`
+passes the original `message` string back to JavaScript's success
+callback as a parameter.
+
+## Android Integration
+
+Android features an `Intent` system that allows processes to
+communicate with each other.  Plugins have access to a
+`CordovaInterface` object, which can access the Android `Activity`
+that runs the application.  This is the `Context` required to launch a
+new Android `Intent`.  The `CordovaInterface` allows plugins to start
+an `Activity` for a result, and to set the callback plugin for when
+the `Intent` returns to the application.
+
+As of Cordova 2.0, Plugins can no longer directly access the
+`Context`, and the legacy `ctx` member is deprecated. All `ctx`
+methods exist on the `Context`, so both `getContext()` and
+`getActivity()` can return the required object.
+
+## Debugging Android Plugins
+
+Eclipse allows you to debug plugins as Java source included in the
+project.  Only the latest version of the Android Developer Tools
+allows you to attach source code to _JAR_ dependencies, so this
+feature is not yet fully supported.
diff --git a/docs/en/3.3.0/guide/platforms/android/tools.md b/docs/en/3.3.0/guide/platforms/android/tools.md
new file mode 100644
index 0000000..e624089
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/android/tools.md
@@ -0,0 +1,85 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Android Command-line Tools
+
+The `cordova` command-line utility is a high-level tool that allows
+you to build applications across several platforms at once. An older
+version of the Cordova framework provides sets of command-line tools
+specific to each platform. To use them as an alternative to the CLI,
+you need to download this version of Cordova from
+[cordova.apache.org](http://cordova.apache.org). The download contains
+separate archives for each platform. Expand the platform you wish to
+target. The tools described here are typically available in the
+top-level `bin` directory, otherwise consult the __README__ file for
+more detailed directions.
+
+For information on the low-level command-line interface that enables
+plugins, see Using Plugman to Manage Plugins. See Application Plugins
+for an overview.
+
+## Create a Project
+
+Run the `create` command, specifying the existing path to the project,
+the reverse-domain-style package identifier, and the app's display
+name.  Here is the syntax for both Mac and Windows:
+
+    $ /path/to/cordova-android/bin/create /path/to/project com.example.project_name ProjectName
+    $ C:\path\to\cordova-android\bin\create.bat C:\path\to\project com.example.project_name ProjectName
+
+## Build
+
+This cleans then builds a project.
+
+Debug, on Mac or Windows:
+
+    $ /path/to/project/cordova/build --debug
+    $ C:\path\to\project\cordova\build.bat --debug
+
+Release, on Mac or Windows:
+
+    $ /path/to/project/cordova/build --release
+    $ C:\path\to\project\cordova\build.bat --release
+
+## Run the App
+
+The `run` command accepts the following _optional_ parameters:
+
+* Target specification. This includes `--emulator`, `--device`, or `--target=<targetID>`.
+
+* Build specification. This includes `--debug`, `--release`, or `--nobuild`.
+
+    $ /path/to/project/cordova/run [Target] [Build]
+    $ C:\path\to\project\cordova\run.bat [Target] [Build]
+
+Make sure you create at least one Android Virtual Device, otherwise
+you're prompted to do so with the `android` command.  If more than one
+AVD is available as a target, you're prompted to select one. By
+default the `run` command detects a connected device, or a currently
+running emulator if no device is found.
+
+## Logging
+
+    $ /path/to/project/cordova/log
+    $ C:\path\to\project\cordova\log.bat
+
+### Cleaning
+
+    $ /path/to/project/cordova/clean
+    $ C:\path\to\project\cordova\clean.bat
diff --git a/docs/en/3.3.0/guide/platforms/android/upgrading.md b/docs/en/3.3.0/guide/platforms/android/upgrading.md
new file mode 100644
index 0000000..8e87dd5
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/android/upgrading.md
@@ -0,0 +1,441 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Upgrading Android
+
+This guide shows how to modify Android projects to upgrade from older versions of Cordova.
+Most of these instructions apply to projects created with an older set
+of command-line tools that precede the `cordova` CLI utility. See The Command-Line Interface for information how to update the
+version of the CLI.
+
+## Upgrading to 3.2.0 from 3.1.0
+
+For projects that were created with the cordova CLI: 
+
+1. Update the `cordova` CLI version. See The Command-Line Interface.
+
+2. Run `cordova platform update android`
+        
+For projects not created with the cordova CLI, run:
+
+        bin/update <project_path>
+
+## Upgrading to 3.1.0 from 3.0.0
+
+For projects that were created with the cordova CLI: 
+
+1. Update the `cordova` CLI version. See The Command-Line Interface.
+
+2. Run `cordova platform update android`
+        
+For projects not created with the cordova CLI, run:
+
+        bin/update <project_path>
+        
+## Upgrade to the CLI (3.0.0) from 2.9.0
+
+1. Create a new Apache Cordova 3.0.0 project using the cordova CLI, as
+   described in The Command-Line Interface.
+
+2. Add your platforms the cordova project, for example: `cordova
+   platform add android`.
+
+3. Copy the contents of your project's `www` directory to the `www` directory
+   at the root of the cordova project you just created.
+
+4. Copy any native assets from your old project into the appropriate
+   directories under `platforms/android`: this directory is where your
+   native cordova-android project exists.
+
+5. Use the cordova CLI tool to install any plugins you need. Note that
+   the CLI handles all core APIs as plugins, so they may need to be
+   added. Only 3.0.0 plugins are compatible with the CLI.
+
+## Upgrade to 3.0.0 from 2.9.0
+
+1. Create a new Apache Cordova Android project.
+
+2. Copy the contents of your `www` directory to the new project.
+
+3. Copy any native Android assets from your `res` directory to the new project.
+
+4. Copy over any plugins you installed from the `src` subdirectories into the new project.
+
+5. Make sure to upgrade any deprecated `<plugin>` references from your old `config.xml` file to the new `<feature>` specification.
+
+6. Update any references to the `org.apache.cordova.api` package to be `org.apache.cordova`.
+
+   __NOTE__: all core APIs have been removed and must be installed as plugins. Please see the Using Plugman to Manage Plugins Guide for details.
+
+## Upgrade to 2.9.0 from 2.8.0
+
+1. Run `bin/update <project_path>`.
+
+## Upgrade to 2.8.0 from 2.7.0
+
+1. Remove `cordova-2.7.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.8.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+<!-- SS Eclipse -->
+
+4. Copy the new `cordova.js` into your project.
+
+5. Update your HTML to use the new `cordova.js` file.
+
+6. Copy the `res/xml/config.xml` file to match `framework/res/xml/config.xml`.
+
+7. Update `framework/res/xml/config.xml` to have similar settings as it did previously.
+
+8. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.7.0 from 2.6.0
+
+1. Remove `cordova-2.6.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.7.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.7.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.7.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Update `framework/res/xml/config.xml` to have similar settings as it did previously.
+
+8. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.6.0 from 2.5.0
+
+1. Remove `cordova-2.5.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.6.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.6.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.6.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Update `framework/res/xml/config.xml` to have similar settings as it did previously.
+
+8. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+Run `bin/update <project>` with the project path listed in the Cordova Source directory.
+
+## Upgrade to 2.5.0 from 2.4.0
+
+1. Remove `cordova-2.4.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.5.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.5.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.5.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Update `framework/res/xml/config.xml` to have similar settings as it did previously.
+
+8. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.4.0 from 2.3.0
+
+1. Remove `cordova-2.3.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.4.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.4.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.4.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.3.0 from 2.2.0
+
+1. Remove `cordova-2.2.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.3.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.3.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.3.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.2.0 from 2.1.0
+
+1. Remove `cordova-2.1.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.2.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.2.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.2.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.1.0 from 2.0.0
+
+1. Remove `cordova-2.0.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.1.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.1.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.1.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+7. Copy files from `bin/templates/cordova` to the project's `cordova` directory.
+
+## Upgrade to 2.0.0 from 1.9.0
+
+1. Remove `cordova-1.9.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-2.0.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-2.0.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.0.0.js` file.
+
+6. Copy the `res/xml/config.xml` to match `framework/res/xml/config.xml`.
+
+In the 2.0.0 release, the `config.xml` file combines and replaces
+`cordova.xml` and `plugins.xml`.  The old files are deprecated, and
+while they still work in 2.0.0, will stop working in a future release.
+
+## Upgrade to 1.9.0 from 1.8.1
+
+1. Remove `cordova-1.8.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.9.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.9.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-1.9.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+Due to the introduction of the `CordovaWebView` in the 1.9.0 release,
+third-Party plugins may not work.  These plugins need to get a context
+from the `CordovaInterface` using `getContext()` or `getActivity()`.
+If you are not an experienced Android developer, please contact the
+plugin maintainer and add this task to their bug tracker.
+
+## Upgrade to 1.8.0 from 1.8.0
+
+1. Remove `cordova-1.8.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.8.1.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.8.1.js` into your project.
+
+5. Update your HTML to use the new `cordova-1.8.1.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+## Upgrade to 1.8.0 from 1.7.0
+
+1. Remove `cordova-1.7.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.8.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.8.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-1.8.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+## Upgrade to 1.8.0 from 1.7.0
+
+1. Remove `cordova-1.7.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.8.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.8.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-1.8.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+## Upgrade to 1.7.0 from 1.6.1
+
+1. Remove `cordova-1.6.1.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.7.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.7.0.js` into your project.
+
+5. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+## Upgrade to 1.6.1 from 1.6.0
+
+1. Remove `cordova-1.6.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.6.1.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.6.1.js` into your project.
+
+5. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+## Upgrade to 1.6.0 from 1.5.0
+
+1. Remove `cordova-1.5.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.6.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.6.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-1.6.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+7. Replace `res/xml/phonegap.xml` with `res/xml/cordova.xml` to match `framework/res/xml/cordova.xml`.
+
+## Upgrade to 1.5.0 from 1.4.0
+
+1. Remove `phonegap-1.4.0.jar` from the project's `libs` directory.
+
+2. Add `cordova-1.5.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `cordova-1.5.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-1.5.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+7. Replace `res/xml/phonegap.xml` with `res/xml/cordova.xml` to match `framework/res/xml/cordova.xml`.
+
+## Upgrade to 1.4.0 from 1.3.0
+
+1. Remove `phonegap-1.3.0.jar` from the project's `libs` directory.
+
+2. Add `phonegap-1.4.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `phonegap-1.4.0.js` into your project.
+
+5. Update your HTML to use the new `phonegap-1.4.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+7. Update `res/xml/phonegap.xml` to match `framework/res/xml/phonegap.xml`.
+
+## Upgrade to 1.3.0 from 1.2.0
+
+1. Remove `phonegap-1.2.0.jar` from the project's `libs` directory.
+
+2. Add `phonegap-1.3.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `phonegap-1.3.0.js` into your project.
+
+5. Update your HTML to use the new `phonegap-1.2.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+7. Update `res/xml/phonegap.xml` to match `framework/res/xml/phonegap.xml`.
+
+## Upgrade to 1.2.0 from 1.1.0
+
+1. Remove `phonegap-1.1.0.jar` from the project's `libs` directory.
+
+2. Add `phonegap-1.2.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `phonegap-1.2.0.js` into your project.
+
+5. Update your HTML to use the new `phonegap-1.2.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+7. Update `res/xml/phonegap.xml` to match `framework/res/xml/phonegap.xml`.
+
+## Upgrade to 1.1.0 from 1.0.0
+
+1. Remove `phonegap-1.0.0.jar` from the project's `libs` directory.
+
+2. Add `phonegap-1.1.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `phonegap-1.1.0.js` into your project.
+
+5. Update your HTML to use the new `phonegap-1.1.0.js` file.
+
+6. Update `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
+## Upgrade to 1.0.0 from 0.9.6
+
+1. Remove `phonegap-0.9.6.jar` from the project's `libs` directory.
+
+2. Add `phonegap-1.0.0.jar` to the project's `libs` directory.
+
+3. If you use Eclipse, please refresh your Eclipse project and do a clean.
+
+4. Copy the new `phonegap-1.0.0.js` into your project.
+
+5. Update your HTML to use the new `phonegap-1.0.0.js` file.
+
+6. Add the `res/xml/plugins.xml` to match `framework/res/xml/plugins.xml`.
+
diff --git a/docs/en/3.3.0/guide/platforms/android/webview.md b/docs/en/3.3.0/guide/platforms/android/webview.md
new file mode 100644
index 0000000..fb92617
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/android/webview.md
@@ -0,0 +1,131 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Android WebViews
+
+This section shows how to embed a Cordova-enabled WebView component
+within a larger Android application. For details on how these
+components can communicate with each other, see Application Plugins.
+
+If you're unfamiliar with Android, you should first familiarize
+yourself with the Android Platform Guide and have the latest Android
+SDK installed before you attempt the more unusual development option
+of embedding a WebView.  Starting with Cordova 1.9, the Android
+platform relies on a `CordovaWebView` component, which builds on a
+legacy `CordovaActivity` component that pre-dates the 1.9 release.
+
+1. To follow these instructions, make sure you have the latest Cordova
+   distribution. Download it from
+   [cordova.apache.org](http://cordova.apache.org) and unzip its
+   Android package.
+
+1. Navigate to the Android package's `/framework` directory and run
+   `ant jar`. It creates the Cordova `.jar` file, formed as
+   `/framework/cordova-3.3.0.jar`.
+
+1. Copy the `.jar` file into the Android project's `/libs` directory.
+
+1. Add the following to the application's `/res/xml/main.xml` file,
+   with the `layout_height`, `layout_width` and `id` modified to suit
+   the application:
+
+        <org.apache.cordova.CordovaWebView
+            android:id="@+id/tutorialView"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+
+1. Modify the activity so that it implements the `CordovaInterface`.
+   It should implement the included methods.  You may wish to copy
+   them from `/framework/src/org/apache/cordova/CordovaActivity.java`,
+   or else implement them on your own.  The following code fragment
+   shows a basic application that relies on the interface. Note how
+   the referenced view id matches the `id` attribute specified in the
+   XML fragment shown above:
+
+        public class CordovaViewTestActivity extends Activity implements CordovaInterface {
+            CordovaWebView cwv;
+            /* Called when the activity is first created. */
+            @Override
+            public void onCreate(Bundle savedInstanceState) {
+                super.onCreate(savedInstanceState);
+                setContentView(R.layout.main);
+                cwv = (CordovaWebView) findViewById(R.id.tutorialView);
+                Config.init(this);
+                cwv.loadUrl(Config.getStartUrl());
+            }
+
+1. If the application needs to use the camera, implement the
+   following:
+
+        @Override
+        public void setActivityResultCallback(CordovaPlugin plugin) {
+            this.activityResultCallback = plugin;
+        }
+        /**
+         * Launch an activity for which you would like a result when it finished. When this activity exits,
+         * your onActivityResult() method is called.
+         *
+         * @param command           The command object
+         * @param intent            The intent to start
+         * @param requestCode       The request code that is passed to callback to identify the activity
+         */
+        public void startActivityForResult(CordovaPlugin command, Intent intent, int requestCode) {
+            this.activityResultCallback = command;
+            this.activityResultKeepRunning = this.keepRunning;
+            
+            // If multitasking turned on, then disable it for activities that return results
+            if (command != null) {
+                this.keepRunning = false;
+            }
+        
+            // Start activity
+            super.startActivityForResult(intent, requestCode);
+        }   
+    
+        @Override
+        /**
+         * Called when an activity you launched exits, giving you the requestCode you started it with,
+         * the resultCode it returned, and any additional data from it.
+         *
+         * @param requestCode       The request code originally supplied to startActivityForResult(),
+         *                          allowing you to identify who this result came from.
+         * @param resultCode        The integer result code returned by the child activity through its setResult().
+         * @param data              An Intent, which can return result data to the caller (various data can be attached to Intent "extras").
+         */
+        protected void onActivityResult(int requestCode, int resultCode, Intent intent) {
+            super.onActivityResult(requestCode, resultCode, intent);
+            CordovaPlugin callback = this.activityResultCallback;
+            if (callback != null) {
+                callback.onActivityResult(requestCode, resultCode, intent);
+            }
+        }
+
+1. Finally, remember to add the thread pool, otherwise plugins
+   have no threads on which to run:
+
+        @Override
+        public ExecutorService getThreadPool() {
+            return threadPool;
+        }
+
+1. Copy the application's HTML and JavaScript files to the Android
+   project's `/assets/www` directory.
+
+1. Copy the `config.xml` file from `/framework/res/xml` to the
+   project's `/res/xml` directory.
diff --git a/docs/en/3.3.0/guide/platforms/blackberry10/config.md b/docs/en/3.3.0/guide/platforms/blackberry10/config.md
new file mode 100644
index 0000000..0749eb6
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/blackberry10/config.md
@@ -0,0 +1,51 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# BlackBerry 10 Configuration
+
+The `config.xml` file controls an app's basic settings that apply
+across each application and CordovaWebView instance. This section
+details preferences that only apply to BlackBerry 10 builds. See The
+config.xml File for information on global configuration options.
+
+- `ChildBrowser` (`disable` or the default `enable`): Disables child
+  browser windows. By default, apps launch a secondary browser window
+  to display resources accessed via `window.open()` or by specifying a
+  `_blank` anchor target. Specify `disable` to override this default
+  behavior.
+
+        <preference name="ChildBrowser" value="disable"/>
+
+- `PopupBlocker` (`enable` or the default `disable`): Enables the
+  popup blocker, which prevents calls to `window.open()`. By default,
+  popups display in a child browser window. Setting the preference to
+  `enable` prevents it from displaying at all.
+
+        <preference name="PopupBlocker" value="enable"/>
+
+- `WebSecurity` (`disable` or the default `enable`): Set to `disable`
+  to override web security settings, allowing access to remote content
+  from unknown sources. This preference is intended as a development
+  convenience only, so remove it before packaging your app for
+  distribution.  For the released app, all URIs should be known and
+  whitelisted using the `<access>` element, described in the Domain
+  Whitelist Guide.
+
+        <preference name="WebSecurity" value="disable"/>
+
diff --git a/docs/en/3.3.0/guide/platforms/blackberry10/index.md b/docs/en/3.3.0/guide/platforms/blackberry10/index.md
new file mode 100644
index 0000000..73c68f1
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/blackberry10/index.md
@@ -0,0 +1,173 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# BlackBerry 10 Platform Guide
+
+This guide shows how to set up your development environment to build
+and deploy Cordova apps for BlackBerry 10 devices.  For previous
+versions of BlackBerry, you need to use a different set of
+command-line tools, described in BlackBerry Platform Guide.
+
+## Requirements
+
+The development environment is available on Windows, Mac and Linux.
+
+Developers should use the `cordova` utility in conjunction with the
+Blackberry Native SDK.  See The Command-Line Interface for information
+how to install `cordova`, add projects, then build and deploy for each
+platform.
+
+## Install the BlackBerry Native SDK
+
+The BlackBerry Native SDK is available from
+[developer.blackberry.com](http://developer.blackberry.com/native/download/).
+Following installation, you need to add its command-line tools to your
+system path.
+
+On Windows:
+
+* Go to __My Computer &rarr; Properties &rarr; Advanced &rarr; Environment Variables__.
+
+* Append the Native SDK's install directory to the PATH, for example:
+
+    ;C:\bbndk\host_10_2_0_132\darwin\x86\usr\bin\
+
+On Mac and Linux:
+
+* Edit the `~/.bash_profile` file, adding a line such as the
+  following, depending on where the Native SDK was installed:
+
+    $ export PATH=${PATH}:/Applications/Momentics.app/host_10_2_0_15/darwin/x86/usr/bin/
+
+* Run the following to apply the change in the current session:
+
+    $ source ~/.bash_profile
+
+## Set up for Signing
+
+If you wish to test on a device or distribute apps through BlackBerry
+World, your system must be setup for code signing.
+
+To obtain a signing key, go to the [BlackBerry Keys Order Form] (https://www.blackberry.com/SignedKeys/codesigning.html).
+
+Select the first checkbox: "for BlackBerry10 apps developed using BlackBerry 
+NDK" and then sign in or create a BBID.
+
+Enter a password and click "Get Token" to download bbidtoken.csk. Save this
+file to the default location for your OS which will be displayed on the
+download page.
+
+The final step is to generate a signing certificate:
+
+    $ blackberry-keytool -genkeypair -storepass <password> -author 'Your Name’
+
+## Create a Project
+
+Use the `cordova` utility to set up a new project, as described in The
+Command-Line Interface. For example, in a source-code directory:
+ 
+    $ cordova create hello com.example.hello
+    $ cd hello
+    $ cordova platform add blackberry10
+    $ cordova build
+
+## Deploy to Emulator
+
+If you wish to run a device emulator, download and install the
+BlackBerry 10 Simulator.
+
+* [Download](http://developer.blackberry.com/native/download/)
+* [Getting Started](http://developer.blackberry.com/devzone/develop/simulator/blackberry_10_simulator_start.html)
+
+Before testing an app on either an emulator or a device, you need to
+enable development mode.
+
+Launch the emulator image, then choose __Settings__ from the home screen:
+
+![](img/guide/platforms/blackberry10/bb_home.png)
+
+Navigate to the __Security and Privacy &rarr; Development Mode__
+section and enable the option:
+
+![](img/guide/platforms/blackberry10/bb_devel.png)
+
+Then, run the `emulate` command to view the app:
+
+    $ cordova emulate blackberry10 --devicepass <password>
+
+## Deploy to Device
+
+To deploy to a device, make sure it is plugged into your computer and
+development mode is enabled.
+
+Then, run the `run` command to view the app:
+
+    $ cordova run blackberry10 --devicepass <password>
+
+If a debug token is not yet set up for the device, an error message
+prompts you to provide the password you defined when configuring your
+computer to sign applications.
+
+    $ cordova run blackberry10 --devicepass <password> --keystorepass <signing password>
+
+## Debugging with WebInspector
+
+When debugging on the device or an emulator, you may run WebInspector
+remotely to view the application's internal state.  A prompt displays
+the URL that allows you to connect to your app with a standard web
+browser.  For more information, see
+[Debugging using WebInspector](http://developer.blackberry.com/html5/documentation/web_inspector_overview_1553586_11.html).
+
+## Building a Release Version
+
+By default, running the `cordova build` command creates an unsigned
+_.bar_ package file suitable for testing on a device or simulator.
+
+Use `--release` to create a release version suitable for distribution
+through BlackBerry World.
+
+    $ cordova build --release --keystorepass <signing password>
+
+The `--keystorepass` option specifies the password you defined when
+configuring your computer to sign applications.
+
+
+## Deploy to Other Locations
+
+The instructions above assume a device is plugged in via USB or a
+simulator is running on the local machine. It is also possible to
+deploy to other locations.
+
+An additional set of command-line utilities are included when you set
+up the BlackBerry 10 platform for your project.  The following
+command, in this case invoked from the project top-level directory,
+associates a target named _emu_ with an IP address.
+
+* On Windows:
+
+    $ platforms\blackberry10\cordova\target.bat add emu 192.168.2.24 -t simulator
+
+* On Mac/Linux:
+
+    $ platforms/blackberry10/cordova/target add emu 192.168.2.24 -t simulator
+
+Once the target is defined, you can provide it to the run command using
+`--target`:
+
+    $ cordova run blackberry10 --target=emu
diff --git a/docs/en/3.3.0/guide/platforms/blackberry10/plugin.md b/docs/en/3.3.0/guide/platforms/blackberry10/plugin.md
new file mode 100644
index 0000000..8dd06be
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/blackberry10/plugin.md
@@ -0,0 +1,255 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# BlackBerry 10 Plugins
+
+This section provides details for how to implement native plugin code
+on the BlackBerry 10 platform. Before reading this, see Application
+Plugins for an overview of the plugin's structure and its common
+JavaScript interface. This section continues to demonstrate the sample
+_echo_ plugin that communicates from the Cordova webview to the native
+platform and back.
+
+The Echo plugin basically returns whatever string the `window.echo`
+function sends from JavaScript:
+
+        window.echo = function(str, callback) {
+            cordova.exec(callback, function(err) {
+                callback('Nothing to echo.');
+            }, "Echo", "echo", [str]);
+        };
+
+A Cordova plugin for BlackBerry 10 contains both JavaScript and native
+code, which communicate with each other through a framework provided
+by JNEXT. Every plugin must also include a `plugin.xml` file.
+
+## Creating the Native Class
+
+To create the native portion of your plugin, open the BlackBerry 10
+NDK IDE and select __File &rarr; New &rarr; BlackBerry Project &rarr;
+Native Extension &rarr; BlackBerry 10__. Enter the desired
+project name and location, then press __Finish__.
+
+The project created by the IDE contains sample code for a memory
+plugin. You may replace or modify these files to implement your own
+functionality:
+
+- `*name*_js.hpp`: C++ header for the JNEXT code.
+
+- `*name*_js.cpp`: C++ code for JNEXT.
+
+The native interface for the JNEXT extension can be viewed in the
+plugin header file located in the project's public directory. It also
+features constants and utility functions available from within native
+code. The plugin must be derived from `JSExt`, which is defined in
+`plugin.h`. That is, you must implement the following class:
+
+        class JSExt
+        {
+        public:
+            virtual ~JSExt() {};
+            virtual string InvokeMethod( const string& strCommand ) = 0;
+            virtual bool CanDelete( void ) = 0;
+        private:
+            std::string m_id;
+        };
+
+The extension should include the `plugin.h` header file. In the `Echo`
+example, you use `JSExt` as follows in the `echo_js.hpp` file:
+
+        #include "../public/plugin.h"
+        #include <string>
+
+        #ifndef ECHO_JS_H_
+        #define ECHO_JS_H_
+
+        class Echo : public JSExt
+        {
+        public:
+            explicit Echo(const std::string& id);
+            virtual ~Echo();
+            virtual std::string InvokeMethod(const std::string& command);
+            virtual bool CanDelete();
+        private:
+            std::string m_id;
+        };
+
+        #endif // ECHO_JS_H_
+
+The `m_id` attribute contains the `JNEXT` id for the object, which is
+passed to the class as an argument to the constructor. It is needed
+for the native side to trigger events on the JavaScript side.  The
+`CanDelete` method determines whether the native object can be
+deleted.  The `InvokeMethod` function is called as a result from a
+request from JavaScript to invoke a method of this particular
+object. The only argument to this function is a string passed from
+JavaScript that this method parses to determine which of the native
+object's methods should execute.  These methods are implemented in
+`echo_js.cpp`. Here is the `InvokeMethod` function for the `Echo`
+example:
+
+        string Echo::InvokeMethod(const string& command) {
+
+            //parse command and args from string
+            int index = command.find_first_of(" ");
+            string strCommand = command.substr(0, index);
+            string strValue = command.substr(index + 1, command.length());
+
+            // Determine which function should be executed
+            if (strCommand == "echo") {
+                return strValue;
+            } else {
+                return "Unsupported Method";
+            }
+        }
+
+The native plugin must also implement the following callback
+functions:
+
+- `extern char* onGetObjList( void );`
+
+- `extern JSExt* onCreateObject( const string& strClassName, const string& strObjId );`
+
+The `onGetObjList` function returns a comma-separated list of classes
+supported by JNEXT. JNEXT uses this function to determine the set of
+classes that JNEXT can instantiate. The `Echo` plugin implements the
+following in `echo_js.cpp`:
+
+        char* onGetObjList() {
+            static char name[] = "Echo";
+            return name;
+        }
+
+The `onCreateObject ` function takes two parameters. The first is the
+name of the requested class to be created from the JavaScript side,
+with valid names as those returned in `onGetObjList`. The second
+parameter is the class's unique object id. This method returns a
+pointer to the created plugin object. The `Echo` plugin implements the
+following in `echo_js.cpp`:
+
+        JSExt* onCreateObject(const string& className, const string& id) {
+            if (className == "Echo") {
+                return new Echo(id);
+            }
+            return NULL;
+        }
+
+## Creating the Plugin's JavaScript
+
+The plugin must contain the following JavaScript files:
+
+- `client.js`: This is considered the client side and contains the API
+  available to a Cordova application. The API in `client.js` calls
+  makes calls to `index.js`. The API in `client.js` also connects
+  callback functions to the events that fire the callbacks.
+
+- `index.js`: Cordova loads `index.js` and makes it accessible through
+  the cordova.exec bridge. The `client.js` file makes calls to the API
+  in the `index.js` file, which in turn makes call to JNEXT to
+  communicate with the native side.
+
+The client and server side (`client.js` and `index.js`) interacts
+through the `Cordova.exec` function. The `client.js` needs to invoke
+the `exec` function and provide the necessary arguments. The `Echo`
+plugin implements the following in the `client.js` file:
+
+        var service = "org.apache.cordova.blackberry.echo",
+            exec = cordova.require("cordova/exec");
+
+        module.exports = {
+            echo: function (data, success, fail) {
+                exec(success, fail, service, "echo", { data: data });
+            }
+        };
+
+The `index.js` component uses JNEXT to interact with the native
+side. Attaching a constructor function named `Echo` to JNEXT allows
+you to perform the following key operations using the `init` function:
+
+- Specify the required module exported by the native side. The name of
+  the required module must match the name of a shared library file
+  (`.so` file):
+
+        JNEXT.require("libecho")
+
+- Create an object by using an acquired module and save the ID that's
+  returned by the call:
+
+        self.m_id = JNEXT.createObject("libecho.Echo");
+
+  When the application calls the `echo` function in `client.js`, that
+  call in turn calls the `echo` function in `index.js`, where the
+  `PluginResult` object sends data as a response back to `client.js`.
+  Since the `args` argument passed into the functions was converted by
+  `JSON.stringfy()` and encoded as a `URIcomponent`, you must call the
+  following:
+
+        data = JSON.parse(decodeURIComponent(args.data));
+
+You can now send the data back, as in the following:
+
+        module.exports = {
+            echo: function (success, fail, args, env) {
+                var result = new PluginResult(args, env),
+                data = JSON.parse(decodeURIComponent(args.data)),
+                response = echo.getInstance().echo(data);
+                result.ok(response, false);
+            }
+        };
+
+## Plugin Architecture
+
+You can place the plugin's artifacts, including the `plugin.xml` file,
+the JavaScript and C++ source files, and the `.so` binary files within
+any directory structure, as long as you correctly specify the file
+locations in the `plugin.xml` file. Here is a typical structure:
+
+***project_directory*** (>plugin.xml)
+
+- **www** (>client.js)
+- **src**
+  - **blackberry10** (>index.js, **native** >*.cpp, *.hpp)
+  - **device** (>*binary file* *.so)
+  - **simulator** (>*binary file* *.so)
+
+The list shows the hierarchical relationship among the top-level
+folders. The parenthesis shows the contents of a given directory. All
+directory names appear in bold text. File names are preceded by the `>`
+sign.
+
+## The _plugin.xml_ file
+
+The `plugin.xml` file contains the extension's namespace and other
+metadata. Set up the `Echo` plugin as follows:
+
+        <plugin xmlns="http://www.phonegap.com/ns/plugins/1.0"
+            id="org.apache.cordova.blackberry.echo"
+            version="1.0.0">
+            <js-module src="www/client.js">
+                <merges target="navigator" />
+            </js-module>
+            <platform name="blackberry10">
+                <source-file src="src/blackberry10/index.js" />
+                <lib-file src="src/blackberry10/native/device/libecho.so" arch="device" />
+                <lib-file src="src/blackberry10/native/simulator/libecho.so" arch="simulator" />
+                <config-file target="www/config.xml" parent="/widget">
+                    <feature name="org.apache.cordova.blackberry.echo" value="org.apache.cordova.blackberry.echo" />
+                </config-file>
+            </platform>
+        </plugin>
diff --git a/docs/en/3.3.0/guide/platforms/blackberry10/tools.md b/docs/en/3.3.0/guide/platforms/blackberry10/tools.md
new file mode 100644
index 0000000..5c364b5
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/blackberry10/tools.md
@@ -0,0 +1,178 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# BlackBerry 10 Command-line Tools
+
+The `cordova` command-line utility is a high-level tool that allows
+you to build applications across several platforms at once. An older
+version of the Cordova framework provides sets of command-line tools
+specific to each platform. To use them as an alternative to the CLI,
+you need to download this version of Cordova from
+[cordova.apache.org](http://cordova.apache.org). The download contains
+separate archives for each platform. Expand the platform you wish to
+target. The tools described here are typically available in the
+top-level `bin` directory, otherwise consult the __README__ file for
+more detailed directions.
+
+For information on the low-level command-line interface that enables
+plugins, see Using Plugman to Manage Plugins. See Application Plugins
+for an overview.
+
+If you need help with any command listed below, type the command along
+with the `-h` or `-help` arguments, which are supported by all
+commands and which provide descriptions for each of the available
+arguments.
+
+## Create an App
+
+The `create` command creates a new project:
+
+    bin/create <path-to-project> <project-package> <project-name>
+
+where
+
+- `<path-to-project>` specifies the directory you want the project created in
+
+- `<project-package>` specifies a reverse domain style identifier
+
+- `<project-name>` specifies the apps display name
+
+__NOTE__: the `create` command bootstraps dependency installation
+through the `npm install` command. Depending on the installation
+directory and system permissions, this may require administrator
+privileges.  If there's problem on OSX/Linux, run `sudo npm install`
+before using the `create` command. On Windows, run `npm install` in a
+command-line utility opened with administrator privileges.
+
+## Create a Target
+
+The `target` command allows you to manage the emulator or BlackBerry
+devices that you use to test your app. You can add or remove a target,
+or set a target as the default target.
+
+### Add a Target
+
+    <path-to-project>/cordova/target add <name> <ip-address> [-t | --type <device | simulator>] [-p | --password <password>] [--pin <device-pin>]
+
+where
+
+- `<name>` specifies a unique name for the target.
+
+- `<ip-address>` specifies the ip address of the BlackBerry device or
+  simulator.
+
+- `-p | --password <password>` specifies the password for the device or
+  emulator. This is required only if the device or emulator is
+  password protected.
+
+- `--pin <device-pin>` specifies the PIN of the BlackBerry device,
+  which identifies that device as a valid host for the debug
+  token. This argument is required only when creating a debug
+  token.
+
+### Remove a Target
+
+    <path-to-project>/cordova/target remove <name>
+
+### Set a Target as the Default
+
+    <path-to-project>/cordova/target default <name>
+
+## Build the App
+
+The `build` command builds the project as a .bar file. You can build
+your app in either release mode (which produces a signed .bar file) or
+in debug mode (which produces an unsigned .bar file).
+
+### Build the App in Release Mode
+
+    <path-to-project>/cordova/build release [-k | --keystorepass <password>] [-b | --buildId <number>] [-p | --params <params-JSON-file>]
+
+where
+
+-   `-k | --keystorepass <password>`  specifies the password you defined when you configured your computer to sign applications.
+
+-   `-b | --buildId <number>`  specifies the build version number of your application. Typically, this number should be incremented from the previous signed version. This argument is optional.
+
+-   `-p | --params <params-JSON-file>`  specifies a JSON file containing additional parameters to pass to downstream tools. This argument is optional.
+
+### Build the Project in Debug Mode
+
+    <path-to-project>/cordova/build debug [<target>] [-k | --keystorepass <password>] [-p | --params <params-JSON-file>]  [-ll | --loglevel <error|warn|verbose>]
+
+where
+
+- `<target>` specifies the name of a previously added target. If
+  `<target>` is not specified, the default target is used, if one has
+  been created. This argument is only required if you want the script
+  to deploy your app to a BlackBerry device or emulator and you have
+  not created a default target. Additionally, if `<target>` is a
+  device, then that device must be connected to your computer by USB
+  connection or be connected to the same Wi-Fi network as your
+  computer.
+
+- `-k | --keystorepass <password>` specifies the password you defined
+  when you configured your computer to sign applications. This
+  password is also used to create your debug token. This argument is
+  only required if you want the script to create and install the debug
+  token for you.
+
+- `-p | --params <params-JSON-file>` specifies a JSON file containing
+  additional parameters to pass to downstream tools.
+
+- `-ll | --loglevel <level>` specifies the log level. The log level may
+  be one of `error`, `warn`, or `verbose`.
+
+If you have previously defined a default target (and previously
+installed a debug token, if that target is a BlackBerry device), you
+can run the script with no arguments, and the script packages your
+app and deploys it to the default target. For example:
+
+    <path-to-project>/cordova/build debug
+
+## Run the App
+
+The `run` command deploys the app's most recent build on the specified
+BlackBerry device or an emulator. To deploy your app, you need to
+specify a target for the device or emulator:
+
+    <path-to-project>/cordova/run <target>
+
+...where `<target> `specifies the name of a previously added target.
+If `<target>` is a device, then it must be connected to your computer
+via USB cable, or else over the same Wi-Fi network as your computer.
+
+## Handle Plugins
+
+The `target` command allows you to add and remove plugins.  To fetch a
+locally hosted plugin:
+
+    <path-to-project>/cordova/plugin fetch <path-to-plugin>
+
+View a list of installed plugins:
+
+    <path-to-project>/cordova/plugin ls
+
+Add a plugin:
+
+    <path-to-project>/cordova/plugin add <name>
+
+Remove a plugin:
+
+    <path-to-project>/cordova/plugin rm <name>
diff --git a/docs/en/3.3.0/guide/platforms/blackberry10/upgrading.md b/docs/en/3.3.0/guide/platforms/blackberry10/upgrading.md
new file mode 100644
index 0000000..1e96f67
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/blackberry10/upgrading.md
@@ -0,0 +1,490 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Upgrading BlackBerry 10
+
+This guide shows how to modify BlackBerry projects to upgrade from older versions of Cordova.
+Most of these instructions apply to projects created with an older set
+of command-line tools that precede the `cordova` CLI utility. See The Command-Line Interface for information how to update the
+version of the CLI.
+
+## Upgrading to 3.2.0 from 3.1.0
+
+For projects that were created with the cordova CLI: 
+
+1. Update the `cordova` CLI version. See The Command-Line Interface.
+
+2. Run `cordova platform update blackberry`
+        
+For projects not created with the cordova CLI, run:
+
+        bin/update <project_path>
+
+## Upgrade to 3.1.0 from 3.0.0
+
+1. Create a new Apache Cordova 3.1.0 project using the cordova CLI, as
+   described in The Command-Line Interface.
+
+2. Add your platforms to the cordova project, for example: `cordova
+   platform add blackberry10`.
+
+3. Copy the contents of the original project's `www` directory to the `www` directory
+   at the root of the cordova project you just created.
+
+4. Copy or overwrite any native assets from your original project
+   (`Resources`, etc.)
+
+5. Copy the `config.xml` file into the `www` directory, and remove any
+   plugin definitions. You need to modify settings here rather than
+   within the platform directory.
+
+6. Use the cordova CLI tool to install any plugins you need. Note that
+   the CLI handles all core APIs as plugins, so they may need to be
+   added. Only plugins marked 3.0.0 and above are compatible with the CLI.
+
+7. Build and test.
+
+Please note that the CLI supports the BlackBerry10 platform exclusively. For PlayBook and BBOS, please see Cordova version 2.9.0 and below.
+
+## Upgrade to the CLI (3.0.0) from 2.9.0
+
+1. Create a new Apache Cordova 3.0.0 project using the cordova CLI, as
+   described in The Command-Line Interface.
+
+2. Add your platforms to the cordova project, for example: `cordova
+   platform add blackberry10`.
+
+3. Copy the contents of the original project's `www` directory to the `www` directory
+   at the root of the cordova project you just created.
+
+4. Copy or overwrite any native assets from your original project
+   (`Resources`, etc.)
+
+5. Copy the `config.xml` file into the `www` directory, and remove any
+   plugin definitions. You need to modify settings here rather than
+   within the platform directory.
+
+6. Use the cordova CLI tool to install any plugins you need. Note that
+   the CLI handles all core APIs as plugins, so they may need to be
+   added. Only 3.0.0 plugins are compatible with the CLI.
+
+7. Build and test.
+
+## Upgrading 2.8.0 Projects to 2.9.0
+
+For BlackBerry 10:
+
+1. Download and extract the Cordova 2.9.0 source to a permanent directory location on your hard drive, for example to `~/Cordova-2.9.0`.
+
+2. Quit any running SDK tools: Eclipse, Momentics and the like.
+
+3. Navigate to the directory where you put the downloaded source above, using a unix like terminal: Terminal.app, Bash, Cygwin, etc.
+
+4. Create a new project, as described in BlackBerry Command-line Tools. This becomes the home of your updated project.
+
+5. Copy your projects source from the old project's `/www` directory to the new project's `/www` directory.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+For BlackBerryOS/Playbook:
+
+1. Download and extract the Cordova 2.9.0 source to a permanent directory location on your hard drive, for example to `~/Cordova-2.9.0`.
+
+2. Quit any running SDK tools: Eclipse, Momentics and the like.
+
+3. Navigate to the directory where you put the downloaded source above, using a unix like terminal: Terminal.app, Bash, Cygwin, etc.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova.js` file from the new project into your `www` directory, and delete your `www/cordova.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+7. Copy the `native` directory from the new project into the existing project, overwriting the old `native` directory.
+
+8. Copy the `lib` directory from the new project into the existing project, overwriting the old `lib` directory.
+
+9. Copy the `cordova` directory from the new project into the existing project, overwriting the old `cordova` directory.
+
+## Upgrading 2.7.0 Projects to 2.8.0
+
+BlackBerry 10 uses the new CLI tooling and manages core APIs as plugins. The instructions migrate your project to a new project, rather than updating an existing project, due to the complexity of updating an old project.
+Also note that the cordova js script file is now called 'cordova.js' and no longer contains a version string.
+
+1. Download and extract the Cordova 2.8.0 source to a permanent directory location on your hard drive, for example to `~/Cordova-2.8.0`.
+
+2. Quit any running SDK tools: Eclipse, Momentics and the like.
+
+3. Navigate to the directory where you put the downloaded source above, using a unix like terminal: Terminal.app, Bash, Cygwin, etc.
+
+4. Create a new project, as described in BlackBerry Command-line Tools. This becomes the home of your updated project.
+
+5. Copy your projects source from the old project's `/www` directory to the new project's `/www` directory.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+For BlackBerryOS/Playbook:
+
+1. Download and extract the Cordova 2.8.0 source to a permanent directory location on your hard drive, for example to `~/Cordova-2.8.0`.
+
+2. Quit any running SDK tools: Eclipse, Momentics and the like.
+
+3. Navigate to the directory where you put the downloaded source above, using a unix like terminal: Terminal.app, Bash, Cygwin, etc.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova.js` file from the new project into your `www` directory, and delete your `www/cordova.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+7. Copy the `native` directory from the new project into the existing project, overwriting the old `native` directory.
+
+8. Copy the `lib` directory from the new project into the existing project, overwriting the old `lib` directory.
+
+9. Copy the `cordova` directory from the new project into the existing project, overwriting the old `cordova` directory.
+
+## Upgrading 2.6.0 Projects to 2.7.0
+
+1. Download and extract the Cordova 2.7.0 source to a permanent directory location on your hard drive, for example to `~/Cordova-2.7.0`.
+
+2. Quit any running SDK tools: Eclipse, Momentics and the like.
+
+3. Navigate to the directory where you put the downloaded source above, using a unix like terminal: Terminal.app, Bash, Cygwin, etc.
+
+4. Create a new project, as described in BlackBerry Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova-2.7.0.js` file from the new project into your `www` directory, and delete your `www/cordova-2.6.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.7.0.js` file.
+
+7. Copy the `native` directory from the new project into the existing project, overwriting the old `native` directory.
+
+8. Copy the `lib` directory from the new project into the existing project, overwriting the old `lib` directory.
+
+9. Copy the `cordova` directory from the new project into the existing project, overwriting the old `cordova` directory.
+
+## Upgrade to 2.6.0 from 2.5.0
+
+Updating the PhoneGap download directory:
+
+It is recommended that you download a fresh copy of the entire directory.
+
+However, here are the new parts needed for the piecemeal update:
+
+1. Update the cordova.blackberry.js file in the `Phonegap-2.6.0/lib/blackberry/javascript` directory.
+
+2. Update the `ext`, `ext-air`, and `ext-qnx` in the `Phonegap-2.6.0/lib/blackberry/framework` directory.
+
+3. Update the `build.xml` file in the `Phonegap-2.6.0/lib/blackberry` directory.
+
+4. Update the `Phonegap-2.6.0/lib/blackberry/bin` directory.
+
+5. Update the `VERSION` file in the `Phonegap-2.6.0/lib/blackberry` directory.
+
+Updating the example/ directory or migrating an existing project:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Update the contents of the `ext-qnx/` directory.
+
+4. Copy the new `cordova-2.6.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.6.0.js` file.
+
+## Upgrade to 2.5.0 from 2.4.0
+
+Updating the PhoneGap download directory:
+
+It is recommended that you download a fresh copy of the entire directory.
+
+However, here are the new parts needed for the piecemeal update:
+
+1. Update the cordova.blackberry.js file in the `Phonegap-2.5.0/lib/blackberry/javascript` directory.
+
+2. Update the `ext`, `ext-air`, and `ext-qnx` in the `Phonegap-2.5.0/lib/blackberry/framework` directory.
+
+3. Update the `build.xml` file in the `Phonegap-2.5.0/lib/blackberry` directory.
+
+4. Update the `Phonegap-2.5.0/lib/blackberry/bin` directory.
+
+5. Update the `VERSION` file in the `Phonegap-2.5.0/lib/blackberry` directory.
+
+Updating the example/ directory or migrating an existing project:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Update the contents of the `ext-qnx/` directory.
+
+4. Copy the new `cordova-2.5.0.js` into your project.
+
+5. Update your HTML to use the new `cordova-2.5.0.js` file.
+
+## Upgrade to 2.4.0 from 2.3.0
+
+Updating just the `www` directory:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Copy the new `cordova-2.4.0.js` into your project.
+    - If playbook, then update the .js file in the `playbook/` directory.
+    - If BlackBerry 10, then update the .js file in the `qnx/` directory.
+
+5. Update your HTML to use the new `cordova-2.4.0.js` file.
+
+Updating the sample directory (i.e., updating using the ant tools):
+
+1. Open the `sample/lib/` directory.
+
+2. Update the .jar file in the `cordova.2.3.0/ext/` directory.
+
+3. Update the contents of the `cordova.2.3.0/ext-air/` directory.
+
+4. Update the contents of the `cordova.2.3.0/ext-qnx/` directory.
+
+5. Update the .js file in the `cordova.2.3.0/javascript/` directory.
+
+6. Open the `sample/lib/` directory and rename the `cordova.2.3.0/` directory to `cordova.2.4.0/`.
+
+7. Type `ant blackberry build` or `ant playbook build` to update the `www/` directory with updated Cordova.
+
+8. Open the `www/` directory and update your HTML to use the new `cordova-2.4.0.js` file.
+
+## Upgrade to 2.3.0 from 2.2.0
+
+Updating just the `www` directory:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Copy the new `cordova-2.3.0.js` into your project.
+    - If playbook, then update the .js file in the `playbook/` directory.
+    - If BlackBerry 10, then update the .js file in the `qnx/` directory.
+
+5. Update your HTML to use the new `cordova-2.3.0.js` file.
+
+Updating the sample directory (i.e., updating using the ant tools):
+
+1. Open the `sample/lib/` directory.
+
+2. Update the .jar file in the `cordova.2.2.0/ext/` directory.
+
+3. Update the contents of the `cordova.2.2.0/ext-air/` directory.
+
+4. Update the contents of the `cordova.2.2.0/ext-qnx/` directory.
+
+5. Update the .js file in the `cordova.2.2.0/javascript/` directory.
+
+6. Open the `sample/lib/` directory and rename the `cordova.2.2.0/` directory to `cordova.2.3.0/`.
+
+7. Type `ant blackberry build` or `ant playbook build` to update the `www/` directory with updated Cordova.
+
+8. Open the `www/` directory and update your HTML to use the new `cordova-2.3.0.js` file.
+
+## Upgrade to 2.2.0 from 2.1.0
+
+Updating just the www directory:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Copy the new `cordova-2.2.0.js` into your project.
+    - If playbook, then update the .js file in the `playbook/` directory.
+    - If BlackBerry 10, then update the .js file in the `qnx/` directory.
+
+5. Update your HTML to use the new `cordova-2.2.0.js` file.
+
+Updating the sample directory (i.e., updating using the ant tools):
+
+1. Open the `sample/lib/` directory.
+
+2. Update the .jar file in the `cordova.2.1.0/ext/` directory.
+
+3. Update the contents of the `cordova.2.1.0/ext-air/` directory.
+
+4. Update the contents of the `cordova.2.1.0/ext-qnx/` directory.
+
+5. Update the .js file in the `cordova.2.1.0/javascript/` directory.
+
+6. Open the `sample/lib/` directory and rename the `cordova.2.1.0/` directory to `cordova.2.2.0/`.
+
+7. Type `ant blackberry build` or `ant playbook build` to update the `www/` directory with updated Cordova.
+
+8. Open the `www/` directory and update your HTML to use the new `cordova-2.2.0.js` file.
+
+## Upgrade to 2.1.0 from 2.0.0
+
+Updating just the `www` directory:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Copy the new `cordova-2.1.0.js` into your project.
+    - If playbook, then update the .js file in the `playbook/` directory.
+
+5. Update your HTML to use the new `cordova-2.1.0.js` file.
+
+Updating the sample directory (i.e., updating using the ant tools):
+
+1. Open the `sample/lib/` directory.
+
+2. Update the .jar file in the `cordova.2.0.0/ext/` directory.
+
+3. Update the contents of the `cordova.2.0.0/ext-air/` directory.
+
+4. Update the .js file in the `cordova.2.0.0/javascript/` directory.
+
+5. Open the `sample/lib/` directory and rename the `cordova.2.0.0/` directory to `cordova.2.1.0/`.
+
+6. Type `ant blackberry build` or `ant playbook build` to update the `www/` directory with updated Cordova.
+
+7. Open the `www/` directory and update your HTML to use the new `cordova-2.1.0.js` file.
+
+## Upgrade to 2.0.0 from 1.9.0
+
+Updating just the `www` directory:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Copy the new `cordova-2.0.0.js` into your project.
+    - If playbook, then update the .js file in the `playbook/` directory.
+
+5. Update your HTML to use the new `cordova-2.0.0.js` file.
+
+6. Update your `www/plugins.xml` file. Two plugins changed their
+   namespace/service label. Change the old entries for the Capture and
+   Contact plugins from:
+
+        <plugin name="Capture" value="org.apache.cordova.media.MediaCapture"/>
+        <plugin name="Contact" value="org.apache.cordova.pim.Contact"/>
+
+   To:
+
+        <plugin name="Capture" value="org.apache.cordova.capture.MediaCapture"/>
+        <plugin name="Contacts" value="org.apache.cordova.pim.Contact"/>
+
+Updating the sample directory (i.e., updating using the ant tools):
+
+1. Open the `sample/lib/` directory.
+
+2. Update the .jar file in the `cordova.1.9.0/ext/` directory.
+
+3. Update the contents of the `cordova.1.9.0/ext-air/` directory.
+
+4. Update the .js file in the `cordova.1.9.0/javascript/` directory.
+
+5. Open the `sample/lib/` directory and rename the `cordova.1.9.0/` directory to `cordova.2.0.0/`.
+
+6. Type `ant blackberry build` or `ant playbook build` to update the `www/` directory with updated Cordova.
+
+7. Open the `www/` directory and update your HTML to use the new `cordova-2.0.0.js` file.
+
+8. Open the `www/` directory and update the `plugins.xml` file. Two plugins
+   changed their namespace/service label. Change the old entries for the
+   Capture and Contact plugins from:
+
+         <plugin name="Capture" value="org.apache.cordova.media.MediaCapture"/>
+         <plugin name="Contact" value="org.apache.cordova.pim.Contact"/>
+
+   To:
+
+         <plugin name="Capture" value="org.apache.cordova.capture.MediaCapture"/>
+         <plugin name="Contacts" value="org.apache.cordova.pim.Contact"/>
+
+- To upgrade to 1.8.0, please go from 1.7.0
+
+## Upgrade to 1.8.0 from 1.7.0
+
+Updating just the `www` directory:
+
+1. Open your `www/` directory, which contains your app.
+
+2. Remove and update the .jar file in the `ext/` directory.
+
+3. Update the contents of the `ext-air/` directory.
+
+4. Copy the new `cordova-1.8.0.js` into your project.
+    - If playbook, then update the .js file in the `playbook/` directory.
+
+5. Update your HTML to use the new `cordova-1.8.0.js` file.
+
+6. Update your `www/plugins.xml` file. Two plugins changed their
+   namespace/service label. Change the old entries for the Capture and
+   Contact plugins from:
+
+        <plugin name="Capture" value="org.apache.cordova.media.MediaCapture"/>
+        <plugin name="Contact" value="org.apache.cordova.pim.Contact"/>
+
+   To:
+
+        <plugin name="Capture" value="org.apache.cordova.capture.MediaCapture"/>
+        <plugin name="Contacts" value="org.apache.cordova.pim.Contact"/>
+
+Updating the sample directory (i.e., updating using the ant tools):
+
+1. Open the `sample/lib/` directory.
+
+2. Update the .jar file in the `cordova.1.7.0/ext/` directory.
+
+3. Update the contents of the `cordova.1.7.0/ext-air/` directory.
+
+4. Update the .js file in the `cordova.1.7.0/javascript/` directory.
+
+5. Open the `sample/lib/` directory and rename the `cordova.1.7.0/` directory to `cordova.1.8.0/`.
+
+6. Type `ant blackberry build` or `ant playbook build` to update the `www/` directory with updated Cordova.
+
+7. Open the `www/` directory and update your HTML to use the new `cordova-1.8.0.js` file.
+
+8. Open the `www/` directory and update the `plugins.xml` file. Two plugins
+   changed their namespace/service label. Change the old entries for the
+   Capture and Contact plugins from:
+
+         <plugin name="Capture" value="org.apache.cordova.media.MediaCapture"/>
+         <plugin name="Contact" value="org.apache.cordova.pim.Contact"/>
+
+   To:
+
+         <plugin name="Capture" value="org.apache.cordova.capture.MediaCapture"/>
+         <plugin name="Contacts" value="org.apache.cordova.pim.Contact"/>
+
diff --git a/docs/en/3.3.0/guide/platforms/index.md b/docs/en/3.3.0/guide/platforms/index.md
new file mode 100644
index 0000000..f477ff5
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/index.md
@@ -0,0 +1,90 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Platform Guides
+
+Before developing for any of the platforms listed below, install
+cordova's command-line interface (CLI).
+(For details, see The Command-Line Interface.)
+
+To develop Cordova applications, you must install SDKs for each mobile
+platform you are targeting. This installation is necessary regardless
+of whether you do the majority of your work in the SDK or use the CLI
+for your build cycle.
+
+Each _Platform Guide_ listed below tells you what you need to know to
+set up each platform's development environment: where to obtain the
+SDK, how to set up device emulators, how to connect devices for direct
+testing, and how to manage signing key requirements.  Additional
+guides provide information on each platform's unique set of
+configuration options, instructions to add plugins, how to upgrade
+each platform, and platform-specific command-line tools that serve as
+a lower-level alternative to the `cordova` command-line utility.
+
+## Amazon Fire OS
+
+* Amazon Fire OS Platform Guide
+* Amazon Fire OS Configuration
+* Amazon Fire OS WebViews
+* Amazon Fire OS Plugins
+
+## Android
+
+* Android Platform Guide
+* Android Configuration
+* Android WebViews
+* Android Plugins
+* Android Command-line Tools
+* Upgrading Android
+
+## BlackBerry 10
+
+* BlackBerry 10 Platform Guide
+* BlackBerry 10 Configuration
+* BlackBerry 10 Plugins
+* BlackBerry 10 Command-line Tools
+* Upgrading BlackBerry 10
+
+## iOS
+
+* iOS Platform Guide
+* iOS Configuration
+* iOS WebViews
+* iOS Plugins
+* iOS Command-line Tools
+* Upgrading iOS
+
+## Windows Phone
+
+* Windows Phone 8 Platform Guide
+* Windows Phone 7 Platform Guide
+* Windows Phone Configuration
+* Windows Phone Command-line Tools
+* Upgrading Windows Phone
+
+## Windows 8
+
+* Windows 8 Platform Guide
+* Windows 8 Command-line Tools
+* Upgrading Windows 8
+
+## Tizen
+
+* Tizen Platform Guide
+
diff --git a/docs/en/3.3.0/guide/platforms/ios/config.md b/docs/en/3.3.0/guide/platforms/ios/config.md
new file mode 100644
index 0000000..6a331b9
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/ios/config.md
@@ -0,0 +1,107 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# iOS Configuration
+
+The `config.xml` file controls an app's basic settings that apply
+across each application and CordovaWebView instance. This section
+details preferences that only apply to iOS builds. See The config.xml
+File for information on global configuration options.
+
+- `EnableViewportScale` (boolean, defaults to `false`): Set to `true`
+  to allow a viewport meta tag to either disable or restrict the range
+  of user scaling, which is enabled by default.
+
+        <preference name="EnableViewportScale" value="true"/>
+
+  Place a viewport such as the following in the HTML to disable
+  scaling and fit content flexibly within the rendering WebView:
+
+        <meta name='viewport' content='width=device-width, initial-scale=1, user-scalable=no' />
+
+- `MediaPlaybackRequiresUserAction` (boolean, defaults to `false`):
+  Set to `true` to prevent HTML5 videos or audios from playing
+  automatically with the `autoplay` attribute or via JavaScript.
+
+        <preference name="MediaPlaybackRequiresUserAction" value="true"/>
+
+- `AllowInlineMediaPlayback` (boolean, defaults to `false`): Set to
+  `true` to allow HTML5 media playback to appear _inline_ within the
+  screen layout, using browser-supplied controls rather than native
+  controls. For this to work, add the `webkit-playsinline` attribute
+  to any `<video>` elements.
+
+        <preference name="AllowInlineMediaPlayback" value="true"/>
+
+- `BackupWebStorage` (string, either `none`, `local`, or the default
+  `cloud`): Set to `cloud` to allow web storage data to backup via
+  iCloud. Set to `local` to allow only local backups via iTunes
+  sync. Set to `none` prevent web storage backups.
+
+        <preference name="BackupWebStorage" value="local"/>
+
+- `TopActivityIndicator` (string, defaults to `gray`): Controls the
+  appearance of the small spinning icon in the status bar that
+  indicates significant processor activity.  Valid values are
+  `whiteLarge`, `white`, and `gray`.
+
+        <preference name="TopActivityIndicator" value="white"/>
+
+- `KeyboardDisplayRequiresUserAction` (boolean, defaults to `true`):
+  Set to `false` to allow the keyboard to appear when calling
+  `focus()` on form inputs.
+
+        <preference name="KeyboardDisplayRequiresUserAction" value="false"/>
+
+- `SuppressesIncrementalRendering` (boolean, defaults to `false`): Set
+  to `true` to wait until all content has been received before it
+  renders to the screen.
+
+        <preference name="SuppressesIncrementalRendering" value="true"/>
+
+- `GapBetweenPages` (float, defaults to `0`): The size of the gap, in points, between pages.
+
+        <preference name="GapBetweenPages" value="0"/>
+
+- `PageLength` (float, defaults to `0`): The size of each page, in points, in the 
+  direction that the pages flow. When PaginationMode is right to left or left to right, 
+  this property represents the width of each page. When PaginationMode is topToBottom 
+  or bottomToTop, this property represents the height of each page. The default value 
+  is 0, which means the layout uses the size of the viewport to determine the dimensions
+  of the page.
+
+        <preference name="PageLength" value="0"/>
+
+- `PaginationBreakingMode` (string, defaults to `page`): Valid values are `page` and 
+  `column`.The manner in which column- or page-breaking occurs. This property 
+  determines whether certain CSS properties regarding column- and page-breaking are 
+  honored or ignored. When this property is set to `column`,  the content respects
+  the CSS properties related to column-breaking in place of page-breaking.
+
+        <preference name="PaginationBreakingMode" value="page"/>
+
+- `PaginationMode` (string, defaults to `unpaginated`): Valid values are `unpaginated`,
+  `leftToRight`, `topToBottom`, `bottomToTop`, and `rightToLeft`. This property determines 
+  whether content in the web view is broken up into pages that fill the view one screen 
+  at a time, or shown as one long scrolling view. If set to a paginated form, this 
+  property toggles a paginated layout on the content, causing the web view to use the 
+  values of PageLength and GapBetweenPages to relayout its content.
+
+        <preference name="PaginationMode" value="unpaginated"/>
+
diff --git a/docs/en/3.3.0/guide/platforms/ios/index.md b/docs/en/3.3.0/guide/platforms/ios/index.md
new file mode 100644
index 0000000..0799efd
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/ios/index.md
@@ -0,0 +1,231 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# iOS Platform Guide
+
+This guide shows how to set up your SDK development environment to
+deploy Cordova apps for iOS devices such as iPhone and iPad. See the
+following for more detailed platform-specific information:
+
+* iOS Configuration
+* Upgrading iOS
+* iOS WebViews
+* iOS Plugins
+* iOS Command-line Tools
+
+The command-line tools above refer to versions prior to Cordova 3.0.
+See The Command-Line Interface for information about the
+current interface.
+
+## Requirements and Support
+
+Apple® tools required to build iOS applications run only on the OS X
+operating system on Intel-based Macs. Xcode® 4.5 (the minimum required
+version) runs only on OS X version 10.7 (Lion) or greater, and
+includes the iOS 6 SDK (Software Development Kit).  To submit apps to
+the Apple App Store℠ requires the latest versions of the Apple tools.
+
+You can test many of the Cordova features using the iOS emulator
+installed with the iOS SDK and Xcode, but you need an actual device to
+fully test all of the app's device features before submitting to the
+App Store.  The device must have at least iOS 5.x installed, the
+minimum iOS version supported as of Cordova 2.3.  Supporting devices
+include all iPad® models, iPhone® 3GS and above, and iPod® Touch 3rd
+Generation or later. To install apps onto a device, you must also be a
+member of Apple's
+[iOS Developer Program](https://developer.apple.com/programs/ios/),
+which costs $99 per year. This guide shows how to deploy apps to the
+iOS emulator, for which you don't need to register with the developer
+program.
+
+## Install the SDK
+
+There are two ways to download Xcode:
+
+* from the [App Store](https://itunes.apple.com/us/app/xcode/id497799835?mt=12),
+  available by searching for "Xcode" in the __App Store__ application.
+
+* from [Apple Developer Downloads](https://developer.apple.com/downloads/index.action),
+  which requires registration as an Apple Developer.
+
+Once Xcode is installed, several command-line tools need to be enabled
+for Cordova to run. From the __Xcode__ menu, select __Preferences__,
+then the __Downloads__ tab. From the __Components__ panel, press the
+__Install__ button next to the __Command Line Tools__ listing.
+
+## Open a Project in the SDK
+
+Use the `cordova` utility to set up a new project, as described in The
+Cordova The Command-Line Interface. For example, in a source-code directory:
+
+        $ cordova create hello com.example.hello "HelloWorld"
+        $ cd hello
+        $ cordova platform add ios
+        $ cordova prepare              # or "cordova build"
+
+Once created, you can open it from within Xcode. Double-click to open
+the `hello/platforms/ios/hello.xcodeproj` file.  The screen should
+look like this:
+
+![](img/guide/platforms/ios/helloworld_project.png)
+
+## Deploy to Emulator
+
+To preview the app in the iOS emulator:
+
+1. Make sure the _.xcodeproj_ file is selected in the left panel.
+
+2. Select the __hello__ app in the panel immediately to the right.
+
+3. Select the intended device from the toolbar's __Scheme__ menu, such
+   as the iPhone 6.0 Simulator as highlighted here:
+
+   ![](img/guide/platforms/ios/select_xcode_scheme.png)
+
+4. Press the __Run__ button that appears in the same toolbar to the
+   left of the __Scheme__. That builds, deploys and runs the
+   application in the emulator. A separate emulator application opens
+   to display the app:
+
+   ![](img/guide/platforms/ios/HelloWorldStandard.png)
+
+   Only one emulator may run at a time, so if you want to test the app
+   in a different emulator, you need to quit the emulator application
+   and run a different target within Xcode.
+
+Xcode comes bundled with emulators for the lastest versions of iPhone
+and iPad. Older versions may be available from the __Xcode &rarr;
+Preferences &rarr; Downloads &rarr; Components__ panel.
+
+## Deploy to Device
+
+For details about various requirements to deploy to a device, refer
+to the _Configuring Development and Distribution Assets_ section of
+Apple's
+[Tools Workflow Guide for iOS](http://developer.apple.com/library/ios/#documentation/Xcode/Conceptual/ios_development_workflow/00-About_the_iOS_Application_Development_Workflow/introduction.html#//apple_ref/doc/uid/TP40007959).
+Briefly, you need to do the following before deploying:
+
+1. Join the Apple iOS Developer Program.
+
+2. Create a _Provisioning Profile_ within the
+   [iOS Provisioning Portal](https://developer.apple.com/ios/manage/overview/index.action).
+   You can use its _Development Provisioning Assistant_ to create and
+   install the profile and certificate Xcode requires.
+
+3. Verify that the _Code Signing_ section's _Code Signing Identity_
+   within the project settings is set to your provisioning profile
+   name.
+
+To deploy to the device:
+
+1. Use the USB cable to plug the device into your Mac.
+
+2. Select the name of the project in the Xcode window's __Scheme__
+   drop-down list.
+
+3. Select your device from the __Device__ drop-down list. If it is
+   plugged in via USB but still does not appear, press the
+   __Organizer__ button to resolve any errors.
+
+4. Press the __Run__ button to build, deploy and run the application
+   on your device.
+
+## Common Problems
+
+__Deprecation Warnings__: When an application programming interface
+(API) is changed or replaced by another API, it is marked as
+_deprecated_.  The API still works in the near term, but is eventually
+removed.  Some of these deprecated interfaces are reflected in Apache
+Cordova, and Xcode issues warnings about them when you build and
+deploy an application.
+
+Xcode's warning about the `invokeString` method concerns functionality
+that launches an app from a custom URL. While the mechanism to load
+from a custom URL has changed, this code is still present to provide
+backwards functionality for apps created with older versions of
+Cordova.  The sample app does not use this functionality, so these
+warnings can be ignored.  To prevent these warnings from appearing,
+remove the code that references the deprecated invokeString API:
+
+* Edit the _Classes/MainViewController.m_ file, surround the following
+  block of code with `/*` and `*/` comments as shown below, then type
+  __Command-s__ to save the file:
+
+        (void)webViewDidFinishLoad:(UIWebView*)theWebView
+        {
+        // only valid if ___PROJECTNAME__-Info.plist specifies a protocol to handle
+        /*
+        if (self.invokeString) {
+          // this is passed before the deviceready event is fired, so you can access it in js when you receive deviceready
+          NSLog(@"DEPRECATED: window.invokeString - use the window.handleOpenURL(url) function instead, which is always called when the app is launched through a custom scheme url.");
+          NSString* jsString = [NSString stringWithFormat:@"var invokeString = \"%@\";", self.invokeString];
+          [theWebView stringByEvaluatingJavaScriptFromString:jsString];
+        }
+        */
+        // Black base color for background matches the native apps
+        theWebView.backgroundColor = [UIColor blackColor];
+
+        return [super webViewDidFinishLoad:theWebView];
+        }
+
+* Edit the _Classes/AppViewDelegate.m_ file, comment out the following
+  line by inserting a double slash as shown below, then type
+  __Command-s__ to save the file:
+
+        //self.viewController.invokeString = invokeString;
+
+* Press __Command-b__ to rebuild the project and eliminate the warnings.
+
+<!-- Does this fix only last until the next "cordova prepare"? -->
+
+__Missing Headers__: Compilation errors relating to missing headers
+result from problems with the build location, and can be fixed 
+via Xcode preferences:
+
+1. Select __Xcode &rarr; Preferences &rarr; Locations__.
+
+2. In the __Derived Data__ section, press the __Advanced__ button and
+   select __Unique__ as the __Build Location__ as shown here:
+
+   ![](img/guide/platforms/ios/xcode_build_location.png)
+
+This is the default setting for a new Xcode install, but it may be set
+differently following an upgrade from an older version of Xcode.
+
+For further information, consult Apple's documentation:
+
+*  [Start Developing iOS Apps Today](http://developer.apple.com/library/ios/#referencelibrary/GettingStarted/RoadMapiOS/index.html#//apple_ref/doc/uid/TP40011343) provides a quick overview of steps for developing iOS Apps.
+
+* [Member Center home page](https://developer.apple.com/membercenter/index.action)
+   provides links to several iOS technical resources including
+   technical resources, the provisioning portal, distribution guides
+   and community forums.
+
+* [Tools Workflow Guide for iOS](http://developer.apple.com/library/ios/#documentation/Xcode/Conceptual/ios_development_workflow/00-About_the_iOS_Application_Development_Workflow/introduction.html#//apple_ref/doc/uid/TP40007959)
+
+* [Xcode 4 User Guide](http://developer.apple.com/library/ios/#documentation/ToolsLanguages/Conceptual/Xcode4UserGuide/000-About_Xcode/about.html#//apple_ref/doc/uid/TP40010215)
+
+* [Session Videos](https://developer.apple.com/videos/wwdc/2012/) from
+  the Apple World Wide Developer Conference 2012 (WWDC2012)
+
+* The [xcode-select command](http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man1/xcode-select.1.html),
+  which helps specify the correct version of Xcode if more than one is installed.
+
+(Mac®, OS X®, Apple®, Xcode®, App Store℠, iPad®, iPhone®, iPod® and  Finder® are Trademarks of Apple Inc.)
+
diff --git a/docs/en/3.3.0/guide/platforms/ios/plugin.md b/docs/en/3.3.0/guide/platforms/ios/plugin.md
new file mode 100644
index 0000000..d91018b
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/ios/plugin.md
@@ -0,0 +1,246 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements. See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership. The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License. You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied. See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# iOS Plugins
+
+This section provides details for how to implement native plugin code
+on the iOS platform. Before reading this, see Application Plugins for
+an overview of the plugin's structure and its common JavaScript
+interface. This section continues to demonstrate the sample _echo_
+plugin that communicates from the Cordova webview to the native
+platform and back.
+
+An iOS plugin is implemented as an Objective-C class that extends the
+`CDVPlugin` class.  For JavaScript's `exec` method's `service`
+parameter to map to an Objective-C class, each plugin class must be
+registered as a `<feature>` tag in the named application directory's
+`config.xml` file.
+
+## Plugin Class Mapping
+
+The JavaScript portion of a plugin uses the `cordova.exec` method as
+follows:
+
+        exec(<successFunction>, <failFunction>, <service>, <action>, [<args>]);
+
+This marshals a request from the `UIWebView` to the iOS native side,
+effectively calling the `action` method on the `service` class, with
+the arguments passed in the `args` array.
+
+Specify the plugin as a `<feature>` tag in your Cordova-iOS
+application's project's `config.xml` file, using the `plugin.xml` file
+to inject this markup automatically, as described in Application
+Plugins:
+
+        <feature name="LocalStorage">
+            <param name="ios-package" value="CDVLocalStorage" />
+        </feature>
+
+The feature's `name` attribute should match what you specify as the
+JavaScript `exec` call's `service` parameter. The `value` attribute
+should match the name of the plugin's Objective-C class. The `<param>`
+element's `name` should always be `ios-package`.  If you do not follow
+these guidelines, the plugin may compile, but Cordova may still not be
+able to access it.
+
+## Plugin Initialization and Lifetime
+
+One instance of a plugin object is created for the life of each
+`UIWebView`. Plugins are ordinarily instantiated when first referenced
+by a call from JavaScript. Otherwise they can be instantiated by
+setting a `param` named `onload` to `true` in the `config.xml` file:
+
+        <feature name="Echo">
+            <param name="ios-package" value="Echo" />
+            <param name="onload" value="true" />
+        </feature>
+
+There is _no_ designated initializer for plugins. Instead, plugins
+should use the `pluginInitialize` method for their startup logic.
+
+Plugins with long-running requests, background activity such as media
+playback, listeners, or that maintain internal state should implement
+the `onReset` method to clean up those activities. The method runs
+when the `UIWebView` navigates to a new page or refreshes, which
+reloads the JavaScript.
+
+## Writing an iOS Cordova Plugin
+
+A JavaScript call fires off a plugin request to the native side, and
+the corresponding iOS Objective-C plugin is mapped properly in the
+`config.xml` file, but what does the final iOS Objective-C plugin
+class look like?  Whatever is dispatched to the plugin with
+JavaScript's `exec` function is passed into the corresponding plugin
+class's `action` method. A plugin method has this signature:
+
+        - (void)myMethod:(CDVInvokedUrlCommand*)command
+        {
+            CDVPluginResult* pluginResult = nil;
+            NSString* myarg = [command.arguments objectAtIndex:0];
+
+            if (myarg != nil) {
+                pluginResult = [CDVPluginResult resultWithStatus:CDVCommandStatus_OK];
+            } else {
+                pluginResult = [CDVPluginResult resultWithStatus:CDVCommandStatus_ERROR messageAsString:@"Arg was null"];
+            }
+            [self.commandDelegate sendPluginResult:pluginResult callbackId:command.callbackId];
+        }
+
+For more details, see
+ `[CDVInvokedUrlCommand.h](https://github.com/apache/cordova-ios/blob/master/CordovaLib/Classes/CDVInvokedUrlCommand.h)`,
+ `[CDVPluginResult.h](https://github.com/apache/cordova-ios/blob/master/CordovaLib/Classes/CDVPluginResult.h)`,
+and
+ `[CDVCommandDelegate.h](https://github.com/apache/cordova-ios/blob/master/CordovaLib/Classes/CDVCommandDelegate.h)`.
+
+## iOS CDVPluginResult Message Types
+
+You can use `CDVPluginResult` to return a variety of result types back to
+the JavaScript callbacks, using class methods that follow this pattern:
+
+        + (CDVPluginResult*)resultWithStatus:(CDVCommandStatus)statusOrdinal messageAs...
+
+You can create `String`, `Int`, `Double`, `Bool`, `Array`,
+`Dictionary`, `ArrayBuffer`, and `Multipart` types. You can also leave
+out any arguments to send a status, or return an error, or even choose
+not to send any plugin result, in which case neither callback fires.
+
+Note the following for complex return values:
+
+- `messageAsArrayBuffer` expects `NSData*` and converts to an
+  `ArrayBuffer` in the JavaScript callback. Likewise, any
+  `ArrayBuffer` the JavaScript sends to a plugin are converted to
+  `NSData*`.
+
+- `messageAsMultipart` expects an `NSArray*` containing any of the
+  other supported types, and sends the entire array as the `arguments`
+  to your JavaScript callback.  This way, all of the arguments are
+  serialized or deserialized as necessary, so it is safe to return
+  `NSData*` as multipart, but not as `Array`/`Dictionary`.
+
+## Echo iOS Plugin Example
+
+To match the JavaScript interface's _echo_ feature described in
+Application Plugins, use the `plugin.xml` to inject a `feature`
+specification to the local platform's `config.xml` file:
+
+        <platform name="ios">
+            <config-file target="config.xml" parent="/*">
+                <feature name="Echo">
+                    <param name="ios-package" value="Echo" />
+                </feature>
+            </config-file>
+        </platform>
+
+
+Then we would add the following `Echo.h` and `Echo.m` files to the
+`Plugins` folder within the Cordova-iOS application directory:
+
+        /********* Echo.h Cordova Plugin Header *******/
+
+        #import <Cordova/CDV.h>
+
+        @interface Echo : CDVPlugin
+
+        - (void)echo:(CDVInvokedUrlCommand*)command;
+
+        @end
+
+        /********* Echo.m Cordova Plugin Implementation *******/
+
+        #import "Echo.h"
+        #import <Cordova/CDV.h>
+
+        @implementation Echo
+
+        - (void)echo:(CDVInvokedUrlCommand*)command
+        {
+            CDVPluginResult* pluginResult = nil;
+            NSString* echo = [command.arguments objectAtIndex:0];
+
+            if (echo != nil && [echo length] > 0) {
+                pluginResult = [CDVPluginResult resultWithStatus:CDVCommandStatus_OK messageAsString:echo];
+            } else {
+                pluginResult = [CDVPluginResult resultWithStatus:CDVCommandStatus_ERROR];
+            }
+
+            [self.commandDelegate sendPluginResult:pluginResult callbackId:command.callbackId];
+        }
+
+        @end
+
+The necessary imports at the top of the file extends the class from
+`CDVPlugin`.  In this case, the plugin only supports a single `echo`
+action. It obtains the echo string by calling the `objectAtIndex`
+method get the first parameter of the `arguments` array, which
+corresponds to the arguments passed in by the JavaScript `exec()`
+function.
+
+It checks the parameter to make sure it is not `nil` or an empty
+string, returning a `PluginResult` with an `ERROR` status if so.  If
+the parameter passes the check, it returns a `PluginResult` with an
+`OK` status, passing in the original `echo` string.  Finally, it sends
+the result to `self.commandDelegate`, which executes the `exec`
+method's success or failure callbacks on the JavaScript side. If the
+success callback is called, it passes in the `echo` parameter.
+
+## iOS Integration
+
+The `CDVPlugin` class features other methods that your plugin can
+override.  For example, you can capture the `pause`, `resume`, app
+terminate and `handleOpenURL` events. See the
+[CDVPlugin.h](https://github.com/apache/cordova-ios/blob/master/CordovaLib/Classes/CDVPlugin.h)
+and
+[CDVPlugin.m](https://github.com/apache/cordova-ios/blob/master/CordovaLib/Classes/CDVPlugin.m)
+class for guidance.
+
+## Threading
+
+Plugin methods ordinarily execute in the same thread as the main
+interface. If your plugin requires a great deal of processing or
+requires a blocking call, you should use a background thread. For
+example:
+
+        - (void)myPluginMethod:(CDVInvokedUrlCommand*)command
+        {
+            // Check command.arguments here.
+            [self.commandDelegate runInBackground:^{
+                NSString* payload = nil;
+                // Some blocking logic...
+                CDVPluginResult* pluginResult = [CDVPluginResult resultWithStatus:CDVCommandStatus_OK messageAsString:payload];
+                // The sendPluginResult method is thread-safe.
+                [self.commandDelegate sendPluginResult:pluginResult callbackId:command.callbackId];
+            }];
+        }
+
+## Debugging iOS Plugins
+
+To debug on the Objective-C side, you need Xcode's built-in debugger.
+For JavaScript, on iOS 5.0 you can use [Weinre, an Apache Cordova
+Project](https://github.com/apache/cordova-weinre) or [iWebInspector,
+a third-party utility](http://www.iwebinspector.com/).  For iOS 6, you
+can attach Safari 6.0 to your app running within the iOS 6 Simulator.
+
+## Common Pitfalls
+
+- Don't forget to add your plugin's mapping to `config.xml`. If you
+  forget, an error is logged in the Xcode console.
+
+- Don't forget to add any hosts you connect to in the whitelist, as
+  described in Domain Whitelist Guide. If you forget, an error is
+  logged in the Xcode console.
diff --git a/docs/en/3.3.0/guide/platforms/ios/tools.md b/docs/en/3.3.0/guide/platforms/ios/tools.md
new file mode 100644
index 0000000..a132c3a
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/ios/tools.md
@@ -0,0 +1,63 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# iOS Command-line Tools
+
+The `cordova` command-line utility is a high-level tool that allows
+you to build applications across several platforms at once. An older
+version of the Cordova framework provides sets of command-line tools
+specific to each platform. To use them as an alternative to the CLI,
+you need to download this version of Cordova from
+[cordova.apache.org](http://cordova.apache.org). The download contains
+separate archives for each platform. Expand the platform you wish to
+target. The tools described here are typically available in the
+top-level `bin` directory, otherwise consult the __README__ file for
+more detailed directions.
+
+The iOS command-line tools are built upon shell scripts and rely on
+Xcode command-line tools such as `xcode-select` and `xcodebuild`.
+
+For information on the low-level command-line interface that enables
+plugins, see Using Plugman to Manage Plugins. See Application Plugins
+for an overview.
+
+## Create a Project
+
+Run the `create` command, specifying the existing path to the project,
+the reverse-domain-style package identifier, and the app's display
+name.
+
+    $ ./path/to/cordova-ios/bin/create /path/to/my_new_project com.example.project_name ProjectName
+
+## Build a Project
+
+    $ /path/to/my_new_project/cordova/build
+
+## Run App on an Emulator
+
+    $ /path/to/my_new_project/cordova/run
+
+## Releasing
+
+    $ /path/to/my_new_project/cordova/release
+
+## Logging
+
+    $ /path/to/my_new_project/cordova/log
+
diff --git a/docs/en/3.3.0/guide/platforms/ios/upgrading.md b/docs/en/3.3.0/guide/platforms/ios/upgrading.md
new file mode 100644
index 0000000..6d20980
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/ios/upgrading.md
@@ -0,0 +1,765 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Upgrading iOS
+
+This guide shows how to modify iOS projects to upgrade from older
+versions of Cordova.  Most of these instructions apply to projects
+created with an older set of command-line tools that precede the
+`cordova` CLI utility. See The Command-Line Interface for information
+how to update the version of the CLI.
+
+__NOTE__: Xcode 4.6 is required, Xcode 5 is recommended. Currently, to submit to the
+Apple App Store, you should use the latest shipped version of the iOS SDK, which is iOS 7.
+iOS 7 SDK is not required yet, but this may change quickly.
+
+## Upgrading 3.1.0 Projects to 3.2.0
+
+For non-CLI projects, run:
+
+        bin/update path/to/project
+        
+For CLI projects:
+
+1. Update the `cordova` CLI version. See The Command-Line Interface.
+
+2. Run `cordova platform update ios`
+        
+
+## Upgrading 3.0.0 Projects to 3.1.0
+
+For non-CLI projects, run:
+
+        bin/update path/to/project
+        
+For CLI projects:
+
+1. Update the `cordova` CLI version. See The Command-Line Interface.
+
+2. Run `cordova platform update ios`
+        
+iOS 7 Issues:
+
+1. Remove `width=device-width, height=device-height` from the
+   `index.html` file's `viewport` `meta` tag. (See [the relevent
+   bug](https://issues.apache.org/jira/browse/CB-4323).)
+
+2. Update your media, media-capture and splashscreen core plugins for
+   iOS 7 support.
+
+Xcode 5 Issues:
+
+1. Update your Project Settings if Xcode 5 prompts you to do so (in the Issues Navigator).
+
+2. Update your __Compiler for C/C++/Objective-C__ setting, under the
+   __Build Settings__ tab, __Build Options__ section. Choose __Default
+   compiler (Apple LLVM 5.0)__.
+
+## Upgrade to the CLI (3.0.0) from 2.9.0
+
+1. Create a new Apache Cordova 3.0.0 project using the cordova CLI, as
+   described in The Command-Line Interface.
+
+2. Add your platforms to the cordova project, for example: `cordova
+   platform add ios`.
+
+3. Copy the contents of the project's `www` directory to the `www` directory
+   at the root of the cordova project you just created.
+
+4. Copy or overwrite any native assets from your original project
+   (`Resources`, etc.), making sure to add any
+   new files to the `.xcodeproj` project. The iOS project builds
+   inside the `platforms\ios` directory.
+
+5. Copy your `config.xml` into the `www` directory, and remove any plugin
+   definitions. Modify settings here instead of the platform directory.
+
+6. Use the cordova CLI tool to install any plugins you need. Note that
+   the CLI handles all core APIs as plugins, so they may need to be
+   added. Only 3.0.0 plugins are compatible with the CLI.
+
+7. Build and test.
+
+## Upgrading 2.9.0 Projects to 3.0.0
+
+1. Download and extract the Cordova 3.0.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-3.0.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova.js` (note that it does not have a version suffix anymore, the version is in the file itself in the header) file from the new project into your `www` directory, and delete your `www/cordova.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+7. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+__NOTE__: Starting with Cordova 3.0.0, plugins are not pre-installed,
+and you need to use the `plugman` command-line utility to install them
+yourself. See Using Plugman to Manage Plugins.
+
+## Upgrading 2.8.0 Projects to 2.9.0
+
+1. Download and extract the Cordova 2.9.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.9.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova.js` (note that it does not have a version suffix anymore, the version is in the file itself in the header) file from the new project into your `www` directory, and delete your `www/cordova.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+7. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+## Upgrading 2.7.0 Projects to 2.8.0
+
+1. Download and extract the Cordova 2.8.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.8.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova.js` (note that it does not have a version suffix anymore, the version is in the file itself in the header) file from the new project into your `www` directory, and delete your `www/cordova-2.7.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova.js` file.
+
+7. Update any `<plugin>` tags in the `config.xml` file to `<feature>` tags. Note that existing `<plugin>` tags still work, but are deprecated. You can copy this information in the `config.xml` file for a new project. For example:
+
+        <plugins>
+            <plugin name="LocalStorage" value="CDVLocalStorage" />
+            <!-- other plugins -->
+        </plugins>
+        
+        <!-- change to: (note that a <feature> tag is on the same level as <plugins> -->
+        <feature name="LocalStorage">
+    	    <param name="ios-package" value="CDVLocalStorage" />
+    	</feature>
+    	<!-- other <feature> tags -->
+        
+
+8. Delete the `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+9. Add these two frameworks to your project:
+        
+        OpenAL
+        ImageIO
+
+10. Update your project's target __Build Settings__. Under __Linking &rarr; Other Linker Flags__, edit __"-Obj-C"__ to be __"-ObjC"__.
+
+11. Update your project's target __Build Settings__. Under __Linking &rarr; Other Linker Flags__, change __"-all\_load"__ to be `-force\_load ${BUILT\_PRODUCTS\_DIR}/libCordova.a`. You would only need to do this if you have the problem defined in [this issue.](https://issues.apache.org/jira/browse/CB-3458).
+
+## Upgrading 2.6.0 Projects to 2.7.0
+
+1. Download and extract the Cordova 2.7.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.7.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. you need the assets from this new project.
+
+5. Copy the `www/cordova-2.7.0.js` file from the new project into your `www` directory, and delete your `www/cordova-2.6.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.7.0.js` file.
+
+7. Update (or replace, if you never changed the file) your `AppDelegate.m` file according to the one from the new project (see [this diff](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/Classes/AppDelegate.m;h=5c05ac80e056753c0e8736f887ba9f28d5b0774c;hp=623ad8ec3c46f656ea18c6c3a190d650dd64e479;hb=c6e71147386d4ad94b07428952d1aae0a9cbf3f5;hpb=c017fda8af00375a453cf27cfc488647972e9a23)).
+
+8. In your `config.xml` file, [remove this line](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=537705d76a5ef6bc5e57a8ebfcab78c02bb4110b;hp=8889726d9a8f8c530fe1371c56d858c34552992a;hb=064239b7b5fa9a867144cf1ee8b2fb798ce1f988;hpb=c9f233250d4b800f3412eeded811daaafb17b2cc).
+
+9. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+## Upgrading 2.5.0 Projects to 2.6.0
+
+1. Download and extract the Cordova 2.6.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.6.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the project's `www/cordova-2.6.0.js` file into your `www` directory, and delete your `www/cordova-2.5.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (along with any other files that reference the script) to refer to the new `cordova-2.6.0.js` file.
+
+7. Update (or replace, if you never changed the file) your `AppDelegate.m` file according to the one from the new project (see [this diff](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/Classes/AppDelegate.m;h=124a56bb4f361e95616f44d6d6f5a96ffa439b60;hp=318f79326176be8f16ebc93bad85dd745f4205b6;hb=a28c7712810a63396e9f32fa4eb94fe3f8b93985;hpb=36acdf55e4cab52802d73764c8a4b5b42cf18ef9)).
+
+8. In your `config.xml` file, [add this new line](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=1555b5e81de326a07efe0bccaa5f5e2326b07a9a;hp=0652d60f8d35ac13c825c572dca6ed01fea4a540;hb=95f16a6dc252db0299b8e2bb53797995b1e39aa1;hpb=a2de90b8f5f5f68bd9520bcbbb9afa3ac409b96d).
+
+9. In your `config.xml` file, [add this new line](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=d307827b7e67301171a913417fb10003d43ce39d;hp=04260aa9786d6d74ab20a07c86d7e8b34e31968c;hb=97b89edfae3527828c0ca6bb2f6d58d9ded95188;hpb=942d33c8e7174a5766029ea1232ba2e0df745c3f).
+
+10. In your `config.xml` file, [UIWebViewBounce has been changed to DisallowOverscroll, and default values are different](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=8889726d9a8f8c530fe1371c56d858c34552992a;hp=d307827b7e67301171a913417fb10003d43ce39d;hb=57982de638a4dce6ae130a26662591741b065f00;hpb=ec411f18309d577b4debefd9a2f085ba719701d5).
+
+10. In your `config.xml` file, the `EnableLocation` preference has been deprecated.
+
+11. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+## Upgrading 2.4.0 Projects to 2.5.0
+
+1. Download and extract the Cordova 2.5.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.5.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova-2.5.0.js` file from the new project into your `www` directory and delete your `www/cordova-2.4.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.5.0.js` file.
+
+7. Update (or replace, if you never changed the file) your `AppDelegate.m` file according to the one from the new project (see [this diff](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/Classes/AppDelegate.m;h=318f79326176be8f16ebc93bad85dd745f4205b6;hp=6dc7bfc84f0ecede4cc43d2a3256ef7c5383b9fe;hb=4001ae13fcb1fcbe73168327630fbc0ce44703d0;hpb=299a324e8c30065fc4511c1fe59c6515d4842f09)).
+
+8. In your `config.xml` file, [add these new lines](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=903944c4b1e58575295c820e154be2f5f09e6314;hp=721c734120b13004a4a543ee25f4287e541f34be;hb=ae467249b4a256bd31ee89aea7a06f4f2316b8ac;hpb=9e39f7ef8096fb15b38121ab0e245a3a958d9cbb).
+
+9. In your `config.xml` file, [edit the root element, change it from cordova to widget](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=64e71636f5dd79fa0978a97b9ff5aa3860a493f5;hp=d8579352dfb21c14e5748e09b2cf3f4396450163;hb=0e711f8d09377a7ac10ff6be4ec17d22cdbee88d;hpb=57c3c082ed9be41c0588d0d63a1d2bfcd2ed878c).
+
+10. In your `config.xml` file, [remove the OpenAllWhitelistURLsInWebView preference](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=721c734120b13004a4a543ee25f4287e541f34be;hp=7d67508b70914aa921a16e79f79c00512502a8b6;hb=187bf21b308551bfb4b98b1a5e11edf04f699791;hpb=03b8854bdf039bcefbe0212db937abd81ac675e4).
+
+11. Delete your `cordova` directory, and copy the `cordova` directory from the new project into your project's root directory. In 2.5.0, this has updated scripts.
+
+12. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+## Upgrading 2.3.0 Projects to 2.4.0
+
+1. Download and extract the Cordova 2.4.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.4.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova-2.4.0.js` file from the new project into your `www` directory, and delete your `www/cordova-2.3.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.4.0.js` file.
+
+7. Update (or replace, if you never changed the files) your `MainViewController.m` file according to the one from the new project (see [this diff](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/Classes/MainViewController.m;h=5f9eeac15c2437cd02a6eb5835b48374e9b94100;hp=89da1082d06ba5e5d0dffc5b2e75a3a06d5c2aa6;hb=b4a2e4ae0445ba7aec788090dce9b822d67edfd8;hpb=a484850f4610e73c7b20cd429a7794ba829ec997)).
+
+8. Update (or replace, if you never changed the file) your `AppDelegate.m` file according to the one from the new project (see [this diff](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/Classes/AppDelegate.m;h=6dc7bfc84f0ecede4cc43d2a3256ef7c5383b9fe;hp=1ca3dafeb354c4442b7e149da4f281675aa6b740;hb=6749c17640c5fed8a7d3a0b9cca204b89a855baa;hpb=deabeeb6fcb35bac9360b053c8bf902b45e6de4d)).
+
+9. In your `config.xml` file, [add this new line](https://git-wip-us.apache.org/repos/asf?p=cordova-ios.git;a=blobdiff;f=bin/templates/project/__TESTING__/config.xml;h=7d67508b70914aa921a16e79f79c00512502a8b6;hp=337d38da6f40c7432b0bce05aa3281d797eec40a;hb=6749c17640c5fed8a7d3a0b9cca204b89a855baa;hpb=deabeeb6fcb35bac9360b053c8bf902b45e6de4d).
+
+10. Delete your `cordova` directory, and copy the `cordova` directory from the new project into your project's root directory. In 2.4.0, this has fixed scripts.
+
+11. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+12. Add AssetsLibrary.framework as a resource to your project.  (See [Apple's documentation](https://developer.apple.com/library/ios/#recipes/xcode_help-project_editor/Articles/AddingaLibrarytoaTarget.html) for instructions on how to do so.).
+
+## Upgrading 2.2.0 Projects to 2.3.0
+
+1. Download and extract the Cordova 2.3.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.3.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova-2.3.0.js` file from the new project into your `www` directory, and delete your `www/cordova-2.2.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.3.0.js` file.
+
+7. Update (or replace, if you never changed the file) your `MainViewController.m` according to the one from the new project.
+
+8. Delete your `cordova` directory, and copy the `cordova` directory from the new project into your project's root directory. In 2.3.0, this has new scripts.
+
+9. Delete your `CordovaLib` directory, and copy the `CordovaLib` directory from the new project into your project's root directory.
+
+10. Convert your `Cordova.plist` file to `config.xml`, by running the script `bin/cordova\_plist\_to\_config\_xml` on your project file.
+
+11. Add the InAppBrowser plugin to your `config.xml`, by adding this tag under `<cordova><plugins>`:
+
+        <plugin name="InAppBrowser" value="CDVInAppBrowser" />
+
+12. Note that Objective-C plugins are _not_ whitelisted anymore. To whitelist your connections with the app whitelist, you need to set the `User-Agent` header of the connection to the same user-agent as the main Cordova WebView.
+You can get this by accessing the `userAgent` property off the main view-controller. The main view-controller (`CDVViewController`) also has a `URLisAllowed` method for you to check whether a URL passes the whitelist.
+
+13. Device API changes:
+    - For iOS, device.platform used to return `iPhone`, `iPad` or `iPod Touch`; now it returns (correctly) `iOS`.
+    - For iOS, device.name (now deprecated for all platforms) used to return the name of the user’s device (e.g ‘Shazron’s iPhone 5′); now it returns what device.platform used to return: `iPhone`, `iPad` or `iPod Touch`.
+    - For all platforms, there is a new property called device.model; this returns the specific device model, e.g `iPad2,5` (for other platforms, this returns what device.name used to return).
+
+## Upgrading 2.1.0 Projects to 2.2.0
+
+1. Download and extract the Cordova 2.2.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.2.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+4. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+5. Copy the `www/cordova-2.2.0.js` file from the new project into your `www` directory, and delete your `www/cordova-2.1.0.js` file.
+
+6. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.2.0.js` file.
+
+7. Update (or replace, if you never changed the file) your `MainViewController.m` according to the one from the new project:
+    - Updated &rarr; viewWillAppear
+
+8. Copy the `cordova` directory from the new project into your project's root directory. In 2.2.0, this has an updated 'emulate' script.
+
+9. Next, update your `CordovaLib` sub-project reference. Beginning with Cordova 2.1.0, we are not using the CORDOVALIB Xcode variable anymore when referencing where `CordovaLib` resides, the reference is an absolute file reference now.
+    1. Launch Terminal.app
+    2. Go to the location where you installed Cordova (see Step 1), in the `bin` subdirectory
+    3. Run the script below where the first parameter is the path to your project's `.xcodeproj` file:
+
+        `update_cordova_subproject path/to/your/project/xcodeproj`
+
+__NOTE__: In 2.2.0, the `bin/create` script copy in the `CordovaLib` sub-project into your project. To have the same kind of setup, just copy in the right `CordovaLib` into your project directory, and update the `CordovaLib` sub-project location (relative to the project) in the Xcode File Inspector.
+
+## Upgrading 2.0.0 Projects to 2.1.0
+
+With Cordova 2.1.0, `CordovaLib` has been upgraded to use __Automatic Reference Counting (ARC)__. You don't need to upgrade to __ARC__ to use CordovaLib, but if you want to upgrade your project to use __ARC__, please use the Xcode migration wizard from the menu: __Edit &rarr; Refactor &rarr; Convert to Objective-C ARC...__, de-select libCordova.a, then run the wizard to completion.
+
+1. Download and extract the Cordova 2.1.0 source to a permanent directory location on your hard drive, for example to `~/Documents/Cordova-2.1.0`.
+
+2. Quit Xcode if it is running.
+
+3. Using Terminal.app, navigate to the directory where you put the downloaded source above.
+
+5. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+6. Copy the `www/cordova-2.1.0.js` file from the new project into your `www` directory, and delete your `www/cordova-2.0.0.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.1.0.js` file.
+
+8. Update (or replace, if you never changed the file) your `AppDelegate.m` according to the one from the new project:
+    - Edited &rarr; application:didFinishLaunchingWithOptions:
+	- Added  &rarr; application:supportedInterfaceOrientationsForWindow:
+
+9. Update (or replace, if you never changed the file) your `MainViewController.m` according to the one from the new project:
+    - Added &rarr; viewWillAppear
+
+10. Copy the `cordova` directory from the new project into your project's root directory. In 2.1.0, this has the updated scripts to support paths with spaces.
+
+11. Remove the `VERSION` file reference from your project (_not_ the one in `CordovaLib`).
+
+12. Next, update your `CordovaLib` sub-project reference. Beginning with Cordova 2.1.0, we are not using the CORDOVALIB Xcode variable anymore when referencing where `CordovaLib` resides, the reference is an absolute file reference now.
+    1. Launch Terminal.app
+    2. Go to the location where you installed Cordova (see Step 1), in the `bin` subdirectory
+    3. Run the script below where the first parameter is the path to your project's `.xcodeproj` file:
+
+        `update_cordova_subproject path/to/your/project/xcodeproj`
+
+## Upgrading 1.9.0 Projects to 2.0.0
+
+1. Install Cordova 2.0.0.
+
+2. Create a new project, as described in iOS Command-line Tools. You need the assets from this new project.
+
+3. Copy the `www/cordova-2.0.0.js` file from the new project into your `www` directory, and delete your `www/cordova-1.9.0.js` file.
+
+4. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-2.0.0.js` file.
+
+5. Copy the `cordova` directory from the new project into your project's root directory (if you want the project command-line tools).
+
+6. Add a new entry under `Plugins` in your `Cordova.plist` file, under
+   the __Supporting Files__ group. The key is `Device` and the value
+   is `CDVDevice`.
+
+7. Remove `Cordova.framework`.
+
+8. Remove `verify.sh` from the __Supporting Files__ group.
+
+9. Select the project icon in the Project Navigator, select your project __Target__, then select the __Build Settings__ tab.
+
+10. Search for __Preprocessor Macros__, then remove all __CORDOVA_FRAMEWORK=1__ values.
+
+11. Locate the `CordovaLib` directory that was installed in your hard-drive under your home folder's `Documents` subdirectory.
+
+12. Locate the `CordovaLib.xcodeproj` file in the `CordovaLib` directory, then drag and drop the file into your project. It should appear as a sub-project.
+
+13. Build your project, you should get some errors relating to `#import` directives.
+
+14. For the `#import` errors, change any quote-based imports in this style:
+
+        #import "CDV.h"
+
+    to this brackets-based style:
+
+        #import <Cordova/CDV.h>
+
+    and remove any `#ifdef` wrappers around any Cordova imports, they are not needed anymore (the imports are now unified)
+
+15. Build your project again, and it should not have any `#import` errors.
+
+16. Select the __project icon__ in the Project Navigator, select your project __Target__, then select the __Build Phases__ tab.
+
+17. Expand the __Target Dependencies__ phase, then select the __+__ button.
+
+18. Select the `CordovaLib` target, then select the __Add__ button.
+
+19. Expand the first __Link Binary with Libraries__ phase (it should already contain a bunch of frameworks), then select the __+__ button.
+
+20. Select the `libCordova.a` static library, then select the __Add__ button.
+
+21. Delete the __Run Script__ phase.
+
+22. Select the __project icon__ in the Project Navigator, select your project __Target__, then select the __Build Settings__ tab.
+
+23. Search for __Other Linker Flags__, and add the values __-force_load__ and __-Obj-C__.
+
+24. Expand the `CordovaLib` sub-project.
+
+25. Locate the `VERSION` file, drag it into your main project (we want to create a link to it, not a copy).
+
+26. Select the __Create groups for any added folders__ radio button, then select the __Finish__ button.
+
+27. Select the `VERSION` file that you just dragged in a previous step.
+
+28. Type the __Option-Command-1__ key combination to show the __File Inspector__ (or menuitem __View &rarr; Utilities &rarr; Show File Inspector__).
+
+29. Choose __Relative to CORDOVALIB__ in the __File Inspector__ for the drop-down menu for __Location__.
+
+30. Set the Xcode preference __Xcode Preferences &rarr; Locations &rarr; Derived Data &rarr; Advanced...__ to __Unique__, so that the unified headers can be found.
+
+31. Select the __project icon__ in the Project Navigator, select your __Target__, then select the __Build Settings__ tab.
+
+32. Search for __Header Search Paths__. For that setting, append these three values, including quotes:
+
+        "$(TARGET_BUILD_DIR)/usr/local/lib/include"
+
+        "$(OBJROOT)/UninstalledProducts/include"
+
+        "$(BUILT_PRODUCTS_DIR)"
+
+33. Search for __Other Linker Flags__. For that setting, append this value:
+
+        -weak_framework CoreFoundation
+
+34. Build your project, it should compile and link with __no issues__.
+
+35. Select your project from the __Scheme__ drop-down, and then select __iPhone 5.1 Simulator__.
+
+36. Select the __Run__ button.
+
+__NOTE__: If your project is not working as expected in the Simulator, please take a note of any errors in the console log in Xcode for clues.
+
+## Upgrading 1.8.x Projects to 1.9.0
+
+1. Install Cordova 1.9.0.
+
+2. Create a new project. You will need some of the assets from this new project.
+
+3. Copy the `www/cordova-1.9.0.js` file from the new project into your `www` directory, and delete your `www/cordova-1.8.x.js` file.
+
+4. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-1.9.0.js` file.
+
+__NOTE__: 1.9.0 supports the new `BackupWebStorage` boolean `Cordova.plist` setting. It's enabled by default, so set it to
+`false` to disable it, especially on iOS 6. See [Release Notes: Safari and UIKit Section](https://developer.apple.com/library/prerelease/ios/#releasenotes/General/RN-iOSSDK-6_0/_index.html)
+
+## Upgrading 1.7.0 Projects to 1.8.x
+
+1. Install Cordova 1.8.0.
+
+2. Create a new project. You will need some of the assets from this new project.
+
+3. Copy the `www/cordova-1.8.0.js` file from the new project into your `www` directory, and delete your `www/cordova-1.7.x.js` file.
+
+4. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-1.8.0.js` file.
+
+If you intend on using the Capture API, you will need the new __iPad retina-display__ assets:
+
+1.  Copy the `Resources/Capture.bundle` item from the new project into your project directory, over-writing your existing `Resources/Capture.bundle` item.
+
+2.  In your project, select the `Capture.bundle` item into your Project Navigator in Xcode, type the __Delete__ key, then select __Remove Reference__ from the resulting dialog.
+
+3.  Drag the new `Capture.bundle` from Step 1 above into your Project Navigator in Xcode, then select the __Create groups for any added folders__ radio button.
+
+## Upgrading 1.6.x Projects to 1.7.0
+
+1. Install Cordova 1.7.0.
+
+2. Create a new project. You will need some of the assets from this new project.
+
+3. Copy the `www/cordova-1.7.0.js` file from the new project into your `www` directory, and delete your `www/cordova-1.6.0.js` file.
+
+4. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-1.7.0.js` file.
+
+## Upgrading 1.5.0 Projects to 1.6.x
+
+1. Install Cordova 1.6.1.
+
+2. Make a backup of `AppDelegate.m`, `AppDelegate.h`, `MainViewController.m`, `MainViewController.h`, and `Cordova.plist` in your project.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy these files from the new project into your 1.5.0-based project directory on disk, replacing any old files (backup your files first from step 2 above):
+
+        AppDelegate.h
+        AppDelegate.m
+        MainViewController.h
+        MainViewController.m
+        Cordova.plist
+
+5. Add all the new `MainViewController` and `AppDelegate` files into your Xcode project.
+
+6. Copy the `www/cordova-1.6.1.js` file from the new project into your `www` directory, and delete your `www/cordova-1.5.0.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `cordova-1.6.1.js` file.
+
+8. Add the new `Cordova.plist` file into your project. This is
+   necessary because the core plugin service names must change to
+   match the ones from Android and BlackBerry, for a unified Cordova
+   JavaScript file (`cordova-js`).
+
+9. Integrate any settings, __Plugins__ and __ExternalHosts__ entries that you had in your __backed-up Cordova.plist__ into the new `Cordova.plist`.
+
+10. Integrate any project-specific code that you have in your backed-up `AppDelegate.h` and `AppDelegate.m` into the new `AppDelegate` files. Any `UIWebViewDelegate` or `CDVCommandDelegate` code in `AppDelegate.m` needs to go into `MainViewController.m` now (see commented-out sections in that file).
+
+11. Integrate any project-specific code that you have in your backed-up `MainViewController.h` and `MainViewController.m` into the new MainViewController files.
+
+12. Click on the project icon in the Project Navigator, select your __Project__, then select the __Build Settings__ tab.
+
+13. Enter __Compiler for C/C++/Objective-C__ in the search field.
+
+14. Select the __Apple LLVM Compiler 3.1__ value.
+
+## Upgrading 1.4.x Projects to 1.5.0
+
+1. Install Cordova 1.5.0.
+
+2. Create a new project and run it once. You will need some of the assets from this new project.
+
+3. Copy the `www/cordova-1.5.0.js` file from the new project into your `www` directory, and delete your `www/phonegap-1.4.x.js` file.
+
+4. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new Cordova `cordova-1.5.0.js` file.
+
+5. Find `PhoneGap.framework` in your Project Navigator, select it.
+
+6. Type the __Delete__ key and delete the `PhoneGap.framework` reference in the Project Navigator.
+
+7. Type the __Option-Command-A__ key combination, which should drop down a sheet to add files to your project (the __Add Files...__ sheet). Make sure the __Created groups for any added folders__ radio button is selected.
+
+8. Type the __Shift-Command-G__ key combination, which should drop down another sheet for you to go to a folder (the __Go to the folder:__ sheet).
+
+9. Enter `/Users/Shared/Cordova/Frameworks/Cordova.framework` in the __Go to the folder:__ sheet and then press the __Go__ button.
+
+10. Press the __Add__ button in the __Add Files...__ sheet.
+
+11. Select `Cordova.framework` in the Project Navigator.
+
+12. Type the __Option-Command-1__ key combination to show the __File Inspector__.
+
+13. Choose __Absolute Path__ in the __File Inspector__ for the drop-down menu for __Location__.
+
+14. Type the __Option-Command-A__ key combination, which should drop down a sheet to add files to your project (the __Add Files...__ sheet). Make sure the __Created groups for any added folders__ radio button is selected.
+
+15. Type the __Shift-Command-G__ key combination, which should drop down another sheet for you to go to a folder (the __Go to the folder:__ sheet).
+
+16. Enter `~/Documents/CordovaLib/Classes/deprecated` in the __Go to the folder:__ sheet and then press the __Go__ button.
+
+17. Press the __Add__ button in the __Add Files...__ sheet.
+
+18. In your `AppDelegate.h`, `AppDelegate.m`, and `MainViewController.h` files, replace the whole `#ifdef PHONEGAP_FRAMEWORK` block with:
+
+        #import "CDVDeprecated.h"
+
+19. Click on the __project icon__ in the Project Navigator, select your __Target__, then select the __Build Settings__ tab.
+
+20. Search for __Framework Search Paths__.
+
+21. Replace the existing value with `/Users/Shared/Cordova/Frameworks`.
+
+22. Search for __Preprocessor Macros__.
+
+23. For the first (combined) value, replace the value with __CORDOVA_FRAMEWORK=YES__.
+
+24. Select the __Build Phases__ tab.
+
+25. Expand __Run Script__.
+
+26. Replace any occurrences of __PhoneGap__ with __Cordova__.
+
+27. Find your `PhoneGap.plist` file in the Project Navigator, and click on the filename once to enter name edit mode.
+
+28. Rename `PhoneGap.plist` to `Cordova.plist`.
+
+29. Right-click on `Cordova.plist` and choose __Open As &rarr; Source Code__.
+
+30. Press __Option-Command-F__, choose __Replace__ from the drop-down on the top left of the Source window.
+
+31. Enter `com.phonegap` for the Find string, and `org.apache.cordova`
+    for the Replace string, then press the __Replace All__ button.
+
+32. Enter __PG__ for the Find string, and __CDV__ for the Replace
+    string, then press the __Replace All__ button.
+
+33. Press __Command-B__ to build. You still have deprecations
+    that you can get rid of in the future (see `CDVDeprecated.h`. For
+    example, replace classes in your code that use PG* to CDV*).
+
+## Upgrading 1.4.0 Projects to 1.4.1
+
+1. Install Cordova 1.4.1.
+
+2. Make a backup of `MainViewController.m`.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy the `MainViewController.m` file from the new project into your 1.4.0-based project directory on disk, replacing the old file (backup your files first from step 2 above).
+
+5. Add the `MainViewController.m` file into your Xcode project.
+
+6. Integrate any project-specific code that you have in your backed-up `MainViewController.m` into the new file.
+
+7. Updating the `phonegap-1.4.0.js` file is optional, nothing has changed in the JavaScript between 1.4.0 and 1.4.1.
+
+## Upgrading 1.3.0 Projects to 1.4.0
+
+1. Install Cordova 1.4.0.
+
+2. Make a backup of `AppDelegate.m` and `AppDelegate.h` in your project.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy these files from the new project into your 1.3.0-based project directory on disk, replacing any old files (backup your files first from step 2 above):
+
+        AppDelegate.h
+        AppDelegate.m
+        MainViewController.h
+        MainViewController.m
+        MainViewController.xib
+
+5. Add all the `MainViewController` files into your Xcode project.
+
+6. Copy the `www/phonegap-1.4.0.js` file from the new project into your `www` directory, and delete your `www/phonegap-1.3.0.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `phonegap-1.4.0.js` file.
+
+8. Add a new entry under `Plugins` in your `PhoneGap.plist` file. The
+   key is `com.phonegap.battery` and the value is `PGBattery`.
+
+9. Integrate any project-specific code that you have in your backed-up `AppDelegate.h` and `AppDelegate.m` into the new AppDelegate files.
+
+## Upgrading 1.2.0 Projects to 1.3.0
+
+1. Install Cordova 1.3.0.
+
+2. Make a backup of `AppDelegate.m` and `AppDelegate.h` in your project.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy these files from the new project into your 1.2.0-based project directory on disk, replacing any old files (backup your files first from step 2 above):
+
+        AppDelegate.h
+        AppDelegate.m
+        MainViewController.h
+        MainViewController.m
+        MainViewController.xib
+
+5. Add all the `MainViewController` files into your Xcode project.
+
+6. Copy the `www/phonegap-1.3.0.js` file from the new project into your `www` directory, and delete your `www/phonegap-1.2.0.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `phonegap-1.3.0.js` file.
+
+8. Add a new entry under `Plugins` in your `PhoneGap.plist` file. The
+   key is `com.phonegap.battery` and the value is `PGBattery`.
+
+9. Integrate any project-specific code that you have in your backed-up `AppDelegate.h` and `AppDelegate.m` into the new AppDelegate files.
+
+## Upgrading 1.1.0 Projects to 1.2.0
+
+1. Install Cordova 1.2.0.
+
+2. Make a backup of `AppDelegate.m` and `AppDelegate.h` in your project.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy these files from the new project into your 1.1.0-based project directory on disk, replacing any old files (backup your files first from step 2 above):
+
+        AppDelegate.h
+        AppDelegate.m
+        MainViewController.h
+        MainViewController.m
+        MainViewController.xib
+
+5. Add all the `MainViewController` files into your Xcode project.
+
+6. Copy the `www/phonegap-1.2.0.js` file from the new project into your `www` directory, and delete your `www/phonegap-1.1.0.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `phonegap-1.2.0.js` file.
+
+8. Add a new entry under `Plugins` in your `PhoneGap.plist` file. The
+   key is `com.phonegap.battery` and the value is `PGBattery`.
+
+9. Integrate any project-specific code that you have in your backed-up `AppDelegate.h` and `AppDelegate.m` into the new AppDelegate files.
+
+## Upgrading 1.0.0 Projects to 1.1.0
+
+1. Install Cordova 1.1.0.
+
+2. Make a backup of `AppDelegate.m` and `AppDelegate.h` in your project.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy these files from the new project into your 1.0.0-based project directory on disk, replacing any old files (backup your files first from step 2 above):
+
+        AppDelegate.h
+        AppDelegate.m
+        MainViewController.h
+        MainViewController.m
+        MainViewController.xib
+
+5. Add all the `MainViewController` files into your Xcode project.
+
+6. Copy the `www/phonegap-1.1.0.js` file from the new project into your `www` directory, and delete your `www/phonegap-1.0.0.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `phonegap-1.1.0.js` file.
+
+8. Add a new entry under `Plugins` in your `PhoneGap.plist` file. The
+   key is `com.phonegap.battery` and the value is `PGBattery`.
+
+9. Integrate any project-specific code that you have in your backed-up `AppDelegate.h` and `AppDelegate.m` into the new AppDelegate files.
+
+## Upgrading 0.9.6 Projects to 1.0.0
+
+1. Install Cordova 1.0.0.
+
+2. Make a backup of `AppDelegate.m` and `AppDelegate.h` in your project.
+
+3. Create a new project. You will need some of the assets from this new project.
+
+4. Copy these files from the new project into your 0.9.6-based project directory on disk, replacing any old files (backup your files first from step 2 above):
+
+        AppDelegate.h
+        AppDelegate.m
+        MainViewController.h
+        MainViewController.m
+        MainViewController.xib
+
+5. Add all the `MainViewController` files into your Xcode project.
+
+6. Copy the `www/phonegap-1.0.0.js` file from the new project into your `www` directory, and delete your `www/phonegap-0.9.6.js` file.
+
+7. Update the Cordova script reference in your `www/index.html` file (and any other files that contain the script reference) to point to the new `phonegap-1.0.0.js` file.
+
+8. Add a new entry under `Plugins` in your `PhoneGap.plist` file. The
+   key is `com.phonegap.battery` and the value is `PGBattery`.
+
+9. Integrate any project-specific code that you have in your backed-up `AppDelegate.h` and `AppDelegate.m` into the new AppDelegate files.
diff --git a/docs/en/3.3.0/guide/platforms/ios/webview.md b/docs/en/3.3.0/guide/platforms/ios/webview.md
new file mode 100644
index 0000000..f99ba1a
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/ios/webview.md
@@ -0,0 +1,185 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# iOS WebViews
+
+This section shows how to embed a Cordova-enabled WebView component
+within a larger iOS application. For details on how these components
+can communicate with each other, see Application Plugins.
+
+Support for iOS WebViews started with Cordova version 1.4, using a
+`Cleaver` component for which the Xcode template serves as a reference
+implementation.  Cordova 2.0 and later versions only support the
+subproject-based Cleaver implementation.
+
+These instructions require at least Cordova 2.3 and Xcode 4.5, along
+with a `config.xml` file from a newly created iOS project. You can use
+the procedure in The Command-Line Interface to create a new project,
+then obtain the `config.xml` file from within the named application's
+subdirectory within `platforms/ios`.
+
+To follow these instructions, make sure you have the latest Cordova
+distribution. Download it from
+[cordova.apache.org](http://cordova.apache.org) and unzip its iOS
+package.
+
+## Adding Cleaver to the Xcode Project (CordovaLib Sub-Project)
+
+1. Quit Xcode if it is running.
+
+1. Open a terminal and navigate to the source directory for Cordova
+   iOS.
+
+1. Copy the `config.xml` file described above into the project
+   directory.
+
+1. Open Xcode and use the Finder to copy the `config.xml` file into
+   its __Project Navigator__ window.
+
+1. Choose __Create groups for any added folders__ and press
+   __Finish__.
+
+1. Use the Finder to copy the `CordovaLib/CordovaLib.xcodeproj` file
+   into Xcode's __Project Navigator__
+
+1. Select `CordovaLib.xcodeproj` within the __Project Navigator__.
+
+1. Type the __Option-Command-1__ key combination to show the __File
+   Inspector__.
+
+1. Choose __Relative to Group__ in the __File Inspector__ for the
+   drop-down menu for __Location__.
+
+1. Select the __project icon__ in the __Project Navigator__, select
+   the __Target__, then select the __Build Settings__ tab.
+
+1. Add `-force_load` and `-Obj-C` for the __Other Linker Flags__ value.
+
+1. Click on the __project icon__ in the Project Navigator, select the
+   __Target__, then select the __Build Phases__ tab.
+
+1. Expand __Link Binaries with Libraries__.
+
+1. Select the __+__ button, and add the following __frameworks__.
+   Optionally within the __Project Navigator__, move them under the
+   __Frameworks__ group:
+
+        AddressBook.framework
+        AddressBookUI.framework
+        AudioToolbox.framework
+        AVFoundation.framework
+        CoreLocation.framework
+        MediaPlayer.framework
+        QuartzCore.framework
+        SystemConfiguration.framework
+        MobileCoreServices.framework
+        CoreMedia.framework
+
+1. Expand __Target Dependencies__, the top box with that label if
+   there's more than one box.
+
+1. Select the __+__ button, and add the `CordovaLib` build product.
+
+1. Expand __Link Binaries with Libraries__, the top box with that label
+  if there's more than one box.
+
+1. Select the __+__ button, and add `libCordova.a`.
+
+1. Set the __Xcode Preferences &rarr; Locations &rarr; Derived Data
+   &rarr; Advanced...__ to __Unique__.
+
+1. Select the __project icon__ in the Project Navigator, select your
+   __Target__, then select the __Build Settings__ tab.
+
+1. Search for __Header Search Paths__. For that setting, add these
+   three values below, including the quotes:
+
+        "$(TARGET_BUILD_DIR)/usr/local/lib/include"        
+        "$(OBJROOT)/UninstalledProducts/include"
+        "$(BUILT_PRODUCTS_DIR)"
+
+    As of Cordova 2.1.0, `CordovaLib` has been upgraded to use
+    __Automatic Reference Counting (ARC)__. You don't need to upgrade
+    to __ARC__ to use `CordovaLib`, but if you want to upgrade your
+    project to use __ARC__, you should use the Xcode migration wizard
+    from the __Edit &rarr; Refactor &rarr; Convert to Objective-C
+    ARC...__ menu, __de-select libCordova.a__, then run the wizard to
+    completion.
+
+## Using CDVViewController
+
+1. Add the following header:
+
+        #import <Cordova/CDVViewController.h>
+
+1. Instantiate a new `CDVViewController` and retain it somewhere,
+   e.g., to a class property:
+
+        CDVViewController* viewController = [CDVViewController new];
+
+1. Optionally, set the `wwwFolderName` property, which defaults to `www`:
+
+        viewController.wwwFolderName = @"myfolder";
+
+1. Optionally, set the start page in the `config.xml` file's
+   `<content>` tag, either a local file:
+
+        <content src="index.html" />
+
+    ...or a remote site:
+
+        <content src="http://apache.org" />
+
+1. Optionally, set the `useSplashScreen` property, which defaults to
+   `NO`:
+
+        viewController.useSplashScreen = YES;
+
+1. Set the __view frame__. Always set this as the last property:
+
+        viewController.view.frame = CGRectMake(0, 0, 320, 480);
+
+1. Add Cleaver to the view:
+
+        [myView addSubview:viewController.view];
+
+## Adding HTML, CSS and JavaScript Assets
+
+1. Create a new directory within the project, `www` for example.
+
+1. Place HTML, CSS and JavaScript assets into this directory.
+
+1. Use the Finder to copy the directory into Xcode's __Project
+   Navigator__ window.
+
+1. Select __Create folder references for any added folders__.
+
+1. Set the appropriate `wwwFolderName` and `startPage` properties for
+   the directory you initially created, or use the defaults (specified
+   in the previous section) when instantiating the
+   `CDVViewController`.
+
+        /*
+         if you created a folder called 'myfolder' and
+         you want the file 'mypage.html' in it to be
+         the startPage
+        */
+        viewController.wwwFolderName = @"myfolder";
+        viewController.startPage = @"mypage.html"
+
diff --git a/docs/en/3.3.0/guide/platforms/tizen/index.md b/docs/en/3.3.0/guide/platforms/tizen/index.md
new file mode 100644
index 0000000..9ae802b
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/tizen/index.md
@@ -0,0 +1,116 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Tizen Platform Guide
+
+This guide describes how to set up your SDK development environment to
+deploy Cordova apps for devices running the Tizen operating system.
+
+## Requirements and Support
+
+The Tizen SDK requires Linux Ubuntu 10.04/10.10/11.04/11.10 (32-bit),
+or Windows XP SP3/7 (32-bit).
+
+Developers should use the `cordova` utility in conjunction with
+the Tizen SDK.  See The Command-Line Interface for information
+how to install it, add projects, then build and deploy a project.
+
+## Install the SDK
+
+Download the Tizen SDK from
+[tizen.org](https://developer.tizen.org/sdk).
+
+<!--
+
+- (optional) Install Tizen Cordova template projects: copy the
+  `/templates` directory content into the Tizen Eclipse IDE web
+  templates directory (e.g:
+  `/home/my_username/tizen-sdk/IDE/Templates/web`).
+
+- __Method #2: Use Tizen Eclipse IDE Cordova Tizen project templates__
+    - Launch Tizen Eclipse IDE
+    - Select  __File &rarr; New &rarr; Tizen Web Project__
+    - Select __User Template__ and __User defined__ items
+    - Select one of the Tizen Cordova template (e.g: __CordovaBasicTemplate__)
+    - Fill the __Project name__ and its target __Location__
+
+    ![](img/guide/platforms/tizen/project_template.png)
+
+    - Click __Finish__
+
+    ![](img/guide/platforms/tizen/project_explorer.png)
+
+    - Your project should now appear in the __Project Explorer__ view
+
+-->
+
+## Open a Project in the SDK
+
+1. Launch the Tizen Eclipse IDE.
+
+2. Select __File &rarr; Import &rarr; Tizen Web Project__:
+
+   ![](img/guide/platforms/tizen/import_project.png)
+
+3. Press __Next__.
+
+4. Make sure __Select root directory__ is checked.
+
+5. Make sure __Copy projects into workspace__ is checked.
+
+6. Press __Browse__ and select the Cordova Tizen `samples` project directory (such as `/cordova-basic`):
+
+   ![](img/guide/platforms/tizen/import_widget.png)
+
+7. Press __Finish__. Your project should now be imported and appear in
+   the __Project Explorer__ view:
+
+   ![](img/guide/platforms/tizen/project_explorer.png)
+
+To rebuild the project, right-click in the __Project Explorer__ view
+and Select __Build Project__:
+
+![](img/guide/platforms/tizen/build_project.png)
+
+A widget package file such as _hello.wgt_ should generate in the
+project's root directory.
+
+## Deploy to Emulator
+
+Right-click the project in the __Project Explorer__ view and select
+__Run As &rarr; Tizen Web Simulator Application__:
+
+![](img/guide/platforms/tizen/runas_web_sim_app.png)
+
+## Deploy to Device
+
+* Make sure that the target device is properly launched, connected and
+  configured. Its __Date and Time__ settings must be set correctly.
+
+* Use the __Connection Explorer__ view to select the application
+  deployment target: __Window &rarr; Show View &rarr; Connection
+  Explorer__.
+
+  ![](img/guide/platforms/tizen/connection_explorer.png)
+
+* Right-click the project in the __Project Explorer__ view, then
+  select __Run As & rarr; Tizen Web Application__:
+
+  ![](img/guide/platforms/tizen/runas_web_app.png)
+
diff --git a/docs/en/3.3.0/guide/platforms/win8/index.md b/docs/en/3.3.0/guide/platforms/win8/index.md
new file mode 100644
index 0000000..cfed2e7
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/win8/index.md
@@ -0,0 +1,124 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Windows 8 Platform Guide
+
+This guide shows how to set up your SDK development environment to
+deploy Cordova apps for Windows 8. See the following for more
+detailed platform-specific information:
+
+* Upgrading Windows 8
+* Windows 8 Command-line Tools
+
+The command-line tools above refer to versions prior to Cordova 3.0.
+See The Command-Line Interface for information about the
+current interface.
+
+Microsoft deprecated the name _Metro-style apps_ in Windows 8 and
+Windows RT. MSDN now refers to this type of app as a _Windows Store_
+app, and this guide follows that convention. Also, in this guide
+_Windows 8_ signifies both Windows 8 and Windows RT.
+
+## Requirements
+
+- Windows 8
+
+- Visual Studio 2012 Professional or better, or Visual Studio 2012 Express for Windows 8
+
+Follow the instructions at
+[windowsstore.com](http://www.windowsstore.com/)
+to submit your app to Windows Store.
+
+## Install SDK and Cordova
+
+Set up your preferred variant of Visual Studio 2012. All of the
+product's paid versions (Professional, etc.) let you build Windows
+Store apps. You need __Express for Windows 8__ to build Windows Store
+apps using the
+[Express editions](http://www.microsoft.com/visualstudio/eng/products/visual-studio-express-products).
+
+Download and extract the latest copy of
+[Cordova](http://phonegap.com/download).
+These instuctions apply to the `lib\windows-8` subdirectory.
+
+## Set up a New Project
+
+You can already build Windows 8 apps using the _HTML/JavaScript track_
+available in Windows Store apps. Use Cordova in Windows Store apps to
+expose the same APIs as on other Cordova-supported platforms.
+
+- Open Visual Studio 2012 and choose __New Project__.
+
+- Select __Installed &rarr; Template &rarr; Other Languages &rarr;
+  JavaScript &rarr; Windows Store__ from the tree, and then __Blank
+  App__ from the projects list. Enter whatever project name you like,
+  such as `CordovaWin8Foo` as in this example:
+
+    ![](img/guide/platforms/win8/wsnewproject.png)
+
+- Microsoft continues to use `default.html` as the default home page,
+  but most web developers use `index.html`. It's a good idea to do so,
+  at least to match other platforms you're likely working on.  To fix
+  this, in __Solution Explorer__ rename the `default.html` file to
+  `index.html`. Then double-click the `package.appxmanifest` file and
+  change the __Start page__ value to `index.html`:
+
+        ![](img/guide/platforms/win8/wschangemanifest.png)
+
+- To include `cordova.js` in your project, right-click on the `js`
+  directory in __Solution Explorer__ and select __Add &rarr; New
+  Item__. Locate the `cordova.js` file in the `lib\windows-8`
+  directory.
+
+- Edit the code for `index.html`. Add a reference to `cordova.js`. You
+  can do this manually, or by dragging the file from __Solution
+  Explorer__. Add the following other dependencies to the app's home page:
+
+            <!-- WinJS references -->
+            <link href="//Microsoft.WinJS.1.0/css/ui-dark.css" rel="stylesheet" />
+            <script src="//Microsoft.WinJS.1.0/js/base.js"></script>
+            <script src="//Microsoft.WinJS.1.0/js/ui.js"></script>
+
+            <!-- Cordova -->
+            <script src="/js/cordova.js"></script>
+
+            <!-- CordovaWin8Foo references -->
+            <link href="/css/default.css" rel="stylesheet" />
+            <script src="/js/default.js"></script>
+
+- Add a `deviceready` handler to demonstrate Cordova is working:
+
+        <body>
+            <p>Content goes here</p>
+            <script type="text/javascript">
+                console.log("Subscribing...");
+                document.addEventListener("deviceready", function () {
+                    navigator.notification.alert("The device is ready!");
+                });
+            </script>
+        </body>
+
+## Test the Project
+
+Run the project from Visual Studio. You'll see the message box appear:
+
+        ![](img/guide/platforms/win8/wsalert.png)
+
+That's it. You're now ready to build Windows Store apps with Cordova.
+
diff --git a/docs/en/3.3.0/guide/platforms/win8/tools.md b/docs/en/3.3.0/guide/platforms/win8/tools.md
new file mode 100644
index 0000000..d6b1a1b
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/win8/tools.md
@@ -0,0 +1,50 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Windows 8 Command-line Tools
+
+The `cordova` command-line utility is a high-level tool that allows
+you to build applications across several platforms at once. An older
+version of the Cordova framework provides sets of command-line tools
+specific to each platform. To use them as an alternative to the CLI,
+you need to download this version of Cordova from
+[cordova.apache.org](http://cordova.apache.org). The download contains
+separate archives for each platform. Expand the platform you wish to
+target. The tools described here are typically available in the
+top-level `bin` directory, otherwise consult the __README__ file for
+more detailed directions.
+
+For information on the low-level command-line interface that enables
+plugins, see Using Plugman to Manage Plugins. See Application Plugins
+for an overview.
+
+## Windows 8
+
+The Windows 8 command-line tools only support creating new projects.
+Commands must be run from a cmd or powershell prompt.
+
+## Create a Project
+
+Run the `create` command with the following parameters:
+
+* Path to your new Cordova Windows 8 project
+
+* Package Name, following reverse-domain style convention. This becomes the default Namespace.
+
+* Project name
diff --git a/docs/en/3.3.0/guide/platforms/win8/upgrading.md b/docs/en/3.3.0/guide/platforms/win8/upgrading.md
new file mode 100644
index 0000000..86d7c3b
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/win8/upgrading.md
@@ -0,0 +1,61 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Upgrading Windows 8
+
+This guide shows how to modify Windows 8 projects to upgrade from older versions of Cordova.
+Most of these instructions apply to projects created with an older set
+of command-line tools that precede the `cordova` CLI utility. See The Command-Line Interface for information how to update the
+version of the CLI.
+
+## Upgrade to 3.2.0 from 3.1.0
+
+For projects that were created with the cordova CLI: 
+
+1. Update the `cordova` CLI version. See The Command-Line Interface. 
+
+2. Run `cordova platform update windows8`.
+        
+For projects not created with the cordova CLI, run:
+
+        bin\update <project_path>
+
+## Upgrade to 3.1.0
+
+Cordova CLI support for Windows 8 was introduced in Cordova 3.1.0. To upgrade, we suggest creating a new Cordova CLI project and moving over all necessary assets.  
+
+## Upgrade to 2.9.0 from 2.8.0
+
+The following commands should be done from within Visual Studio to be sure that the any project references are updated/deleted.
+
+1. Remove `cordova-2.8.0.js` from the project's `www` directory.
+
+2. Add `cordova.js` file from the source to the project's `www` directory. (Note that the file no longer contains a version number in the filename.)
+
+3. Build and test!
+
+## Upgrade to 2.8.0 from 2.7.0
+
+The following commands should be done from within Visual Studio to be sure that the any project references are updated/deleted.
+
+1. Remove `cordova-2.7.0.js` from the project's `www` directory. 
+
+2. Add `cordova.js` file from the source to the project's `www` directory. (Note that the file no longer contains a version number in the filename.)
+
+3. Build and test!
diff --git a/docs/en/3.3.0/guide/platforms/wp7/index.md b/docs/en/3.3.0/guide/platforms/wp7/index.md
new file mode 100644
index 0000000..cfbd488
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/wp7/index.md
@@ -0,0 +1,131 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Windows Phone 7 Platform Guide
+
+This guide shows how to set up your SDK development environment to
+deploy Cordova apps for Windows Phone 7 devices.  Apps also run on
+Windows Phone 8 devices using the same APIs, but version 7 lacks some
+of IE10's advanced features available on Windows Phone 8. Windows
+Phone 8 apps do _not_ run on Windows Phone 7 devices.
+
+See the following for more detailed platform-specific information that
+applies to both versions:
+
+* Upgrading Windows Phone
+* Windows Phone Plugins
+* Windows Phone Command-line Tools
+
+The command-line tools above refer to versions prior to Cordova 3.0.
+See The Command-Line Interface for information about the
+current interface.
+
+## System Requirements
+
+Use Windows 7 or Windows 8 (Pro) or Windows Vista with SP2.  The
+64-bit version (x64) of Windows is required for the SDK.  The Pro
+version is recommended for running a device emulator.
+
+Register and pay for a [Windows Phone Dev
+Center](http://dev.windowsphone.com/en-us/publish) account if you want
+to install an app on a real device or submit it to Market Place.
+
+__NOTE__: Running the SDK in Virtual Machine may present challenges.
+Read [Windows Phone on a Mac](http://aka.ms/BuildaWP8apponaMac) for
+insights on developing solutions.
+
+## Install SDK and Cordova
+
+Download and install the [Windows Phone
+SDK](http://www.microsoft.com/download/en/details.aspx?displaylang=en&amp;id=27570/).
+
+Download and extract the latest copy of
+[Cordova](http://phonegap.com/download). You need to work in the
+`lib\windows-phone-8\wp7` subdirectory, `lib\windows-phone-8\wp8`
+contains the Windwos Phone 8 version of Cordova.
+
+Copy the `CordovaWP7_x_x_x.zip` file to the `\My Documents\Visual
+Studio 2012\Templates\ProjectTemplates\` directory.
+
+## Building the Template
+
+__NOTE__: Skip this step if the `lib\windows-phone` directory already
+contains a `CordovaWP7_x_x_x.zip` file.
+
+To simplify development, Cordova bundles a script to build Visual
+Studio templates. These allow you to rapidly generate Cordova apps,
+and you can modify them if necessary.  The steps below show how to
+generate it.
+
+### Run the Batch File to Create and Install the Templates
+
+The root of the repo contains a `createTemplates.bat` file.
+Double-clicking this file generates two `.zip` files:
+`CordovaWP7_x_x_x.zip` and `CordovaWP8_x_x_x.zip`, where _3.3.0_ is
+the current version number. To use these files easily in Visual
+Studio, copy them to the `My Documents\Visual Studio
+2012\Templates\ProjectTemplates\` subdirectory. You are then able to
+create new __Apache Cordova Windows Phone_ apps from Visual Studio's
+__File &rarr; New Project__ menu.
+
+If you run the batch file from the command line, you can also call
+with a parameter to install automatically:
+
+        >createTemplates.bat -install
+
+## Set up a New Project
+
+- Open Visual Studio Express for Windows Phone and choose __New
+  Project__.
+
+- Select __CordovaWP7__. The version number displays in the template
+  description.
+
+- Give the project a name, and select __OK__.
+
+## Review the Project Structure
+
+The `www` directory features `html`, `js`, and `css` subdirectories
+and any other resources your app requires.
+Any additional content needs to be a part of the Visual Studio
+project, and it must be set as content.
+
+The following sample structure represents a 2.3.0 project, but may
+vary depending on installed version:
+
+![](img/guide/platforms/wp8/projectStructure.png)
+
+## Build the Project for the Device
+
+Before testing your application on a device, the device must be
+registered. Consult
+[Microsoft's documentation](http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff402565(v=vs.105).aspx)
+for details on how to deploy and test on Windows Phone 7. These are
+the basic steps:
+
+- Make sure your phone is connected, and the screen is unlocked.
+
+- In Visual Studio, select __Device__ from the drop-down menu at the top.
+
+- Press the green __play__ button next to the main drop-down menu to
+  start debugging, or else type __F5__.
+
+![](img/guide/platforms/wp7/wpd.png)
+
+At this point, you're done.
diff --git a/docs/en/3.3.0/guide/platforms/wp8/index.md b/docs/en/3.3.0/guide/platforms/wp8/index.md
new file mode 100644
index 0000000..b34bfe6
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/wp8/index.md
@@ -0,0 +1,162 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Windows Phone 8 Platform Guide
+
+This guide shows how to set up your SDK development environment to
+deploy Cordova apps for Windows Phone 8 devices. If you want to target
+both 7.5 and 8 devices, develop for Windows Phone 7 instead as
+detailed in the Windows Phone 7 Platform Guide.  Version 7 does not
+have all the advanced features included in Internet Explorer 10, but
+implements the same set of APIs. Windows Phone 8 apps do _not_ run on
+Windows Phone 7 devices.
+
+See the following for more detailed platform-specific information that
+applies to both versions:
+
+- Upgrading Windows Phone
+- Windows Phone Plugins
+- Windows Phone Command-line Tools
+
+The command-line tools above refer to versions prior to Cordova 3.0.
+See The Command-Line Interface for information about the
+current interface.
+
+## System Requirements
+
+- Operating System:
+    - Windows 8 or Windows 8 Pro
+        - The 64-bit version (x64) of Windows is required for the SDK.
+        - The Pro version is recommended so you can run a device emulator.
+
+- Hardware:
+    - 6.5 GB of free hard disk space
+    - 4 GB RAM
+    - 64-bit (x64) CPU
+
+- Windows Phone 8 Emulator
+    - The phone emulator uses Hyper-V, so this list includes those pre-requisites.
+    - Windows 8 Pro 64-bit edition or greater
+    - Requires a processor that supports virtualization and [Second Level Address Translation (SLAT)](http://en.wikipedia.org/wiki/Second_Level_Address_Translation)
+        - See the [list of Intel processors that support VT-x (virtualization) and EPT (SLAT)](http://ark.intel.com/Products/VirtualizationTechnology)
+    - Enable the virtualization capability (i.e., VT-x on Intel) in your BIOS settings, as usually this is disabled by default.
+
+- SDK and IDE (Visual Studio)
+    - Visual Studio 2012 Professional, Premium, or Ultimate. Note that Visual Studio Express for Windows Phone (included in the SDK) is not recommended because you can not build the template (see below) with VS Express, as it does not have the __Export Template__ functionality, which is only in VS Pro or higher.
+
+- Register and pay for a [Windows Phone Dev Center](http://dev.windowsphone.com/en-us/publish) account if you want to install your app on a real device or submit it to Market Place.
+
+__NOTE__: Running the SDK in Virtual Machine might present some challenges. You can read this blog post that gives insight on the solutions to develop for [Windows Phone on a Mac](http://aka.ms/BuildaWP8apponaMac).
+
+## Install SDK and Cordova
+
+Download and install [Windows Phone
+SDK](http://www.microsoft.com/en-us/download/details.aspx?id=35471).
+
+Download and extract the latest copy of
+[Cordova](http://phonegap.com/download). The `lib\windows-phone-8\wp8`
+subdirectory is where you need to do your work.
+
+Copy the `CordovaWP8_x_x_x.zip` file to the `\My Documents\Visual
+Studio 2012\Templates\ProjectTemplates\` directory.
+
+## Building the Template
+
+__NOTE__: Skip this step if the `lib\windows-phone` directory already
+contains a `CordovaWP8_x_x_x.zip` file.
+
+To simplify development, Cordova bundles a script to build Visual
+Studio templates. These allow you to rapidly generate Cordova apps,
+and you can modify them if necessary.  The steps below show how to
+generate it.
+
+### Run the Batch File to Create and Install the Templates
+
+The repo's root directory contains a `createTemplates.bat` file.
+Double-click this to generate two `.zip` files: `CordovaWP7_x_x_x.zip`
+and `CordovaWP8_x_x_x.zip`, where _3.3.0_ is the current version
+number. To use these files easily in Visual Studio, copy them to `My
+Documents\Visual Studio 2012\Templates\ProjectTemplates\`. You are
+then able to create new Apache Cordova Windows Phone apps from the
+__Visual Studio File &rarr; New Project__ menu.
+
+If you run the batch file from the command line, you can also call it
+with a parameter to install automatically:
+
+        >createTemplates.bat -install
+
+## Set up a New Project
+
+Open Visual Studio Express for Windows Phone and choose __New
+Project__.
+
+Select __CordovaWP8__. The version number is displayed in the
+template description.
+
+Give the project a name, and select __OK__.
+
+![](img/guide/platforms/wp8/StandAloneTemplate.png)
+
+## Review the Project Structure
+
+The `www` directory features `html`, `js`, and `css` subdirectories
+and any other resources your app requires.
+Any additional content needs to be a part of the Visual Studio
+project, and it must be set as content.
+
+The following sample structure represents a 2.3.0 project, but may
+vary depending on the installed version:
+
+![](img/guide/platforms/wp8/projectStructure.png)
+
+## Build and Deploy to Emulator
+
+Make sure __Windows Phone Emulator__ is selected in the main drop-down menu.
+
+Then press the green __play__ button next to the drop-down menu to
+start debugging, or type __F5__.
+
+![](img/guide/platforms/wp8/BuildEmulator.png)
+
+## Build the Project for the Device
+
+Before testing your application on a device, the device must be
+registered. Consult
+[Microsoft's documentation](http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff402565(v=vs.105).aspx)
+for details on how to deploy and test on Windows Phone 8. These are
+the basic steps:
+
+- Make sure your phone is connected, and the screen is unlocked.
+
+- In Visual Studio, select __Device__ from the drop-down menu at the top.
+
+- Press the green __play__ button next to the main drop-down menu to
+  start debugging, or else type __F5__.
+
+![](img/guide/platforms/wp7/wpd.png)
+
+At this point, you're done.
+
+## Further Reading
+
+The Windows Phone Developer Blog provides
+[helpful details](http://blogs.windows.com/windows_phone/b/wpdev/archive/2012/11/15/adapting-your-webkit-optimized-site-for-internet-explorer-10.aspx)
+on differences between IE10 and WebKit browsers, and how to support
+both.
+
diff --git a/docs/en/3.3.0/guide/platforms/wp8/plugin.md b/docs/en/3.3.0/guide/platforms/wp8/plugin.md
new file mode 100644
index 0000000..194f682
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/wp8/plugin.md
@@ -0,0 +1,224 @@
+--
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Windows Phone Plugins
+
+This section provides details for how to implement native plugin code
+on the Windows Phone platform. Before reading this, see Application
+Plugins for an overview of the plugin's structure and its common
+JavaScript interface. This section continues to demonstrate the sample
+_echo_ plugin that communicates from the Cordova webview to the native
+platform and back.
+
+Writing a plugin for Cordova on Windows Phone requires a basic
+understanding of Cordova's architecture. Cordova-WP7 consists of a
+`WebBrowser` that hosts the application's JavaScript code and manages
+native API calls. You can extend a C# `BaseCommand` class
+(`WP7CordovaClassLib.Cordova.Commands.BaseCommand`), which comes with
+most of the functionality you need:
+
+1. Select your project, and right-click to choose __Add &rarr; New
+   Item...__ If you wish, you can add it to the `Plugins` folder.
+
+2. Select __Class__ and name it `Echo.cs`.  This class name must
+   _exactly_ match what you call specify as the service in the
+   `cordova.exec()` call on the JavaScript side.
+
+3. Include the base classes implementation:
+
+        using WPCordovaClassLib.Cordova;
+        using WPCordovaClassLib.Cordova.Commands;
+        using WPCordovaClassLib.Cordova.JSON;
+
+4. Extend your class from `BaseCommand`:
+
+        public class Echo : BaseCommand
+        {
+            // ...
+        }
+
+5. Add an `echo` method that is callable from JavaScript:
+
+        public class Echo : BaseCommand
+        {
+            public void echo(string options)
+            {
+                // all JS callable plugin methods MUST have this signature!
+                // public, returning void, 1 argument that is a string
+            }
+        }
+
+See the
+[BaseCommand.cs](https://github.com/apache/cordova-wp7/blob/master/templates/standalone/cordovalib/Commands/BaseCommand.cs)
+class for methods available for the plugin to override.  For example,
+the plugin can capture 'pause' and 'resume' events.
+
+## Namespaces
+
+The default namespace for unqualified commands is:
+
+        namespace Cordova.Extension.Commands
+        {
+            // ...
+        }
+
+If you want to specify your own namespace, you need to make a fully
+qualified call to `cordova.exec`. For example, if you want to define
+your C# class like this:
+
+        namespace com.mydomain.cordovaExtensions
+        {
+            public class Echo : BaseCommand
+            {
+                // ...
+            }
+        }
+
+The JavaScript would need to call `exec` like this:
+
+        cordova.exec(win, fail, "com.mydomain.cordovaExtensions.Echo", ...);
+
+## Interpreting Arguments in C#
+
+In the example discussed in Application Plugins, the data your plugin
+receives is a string, but what if you want to pass an array of
+strings?  Suppose the JavaScript `cordova.exec` call is specified like
+this:
+
+        cordova.exec(win, fail, "Echo", "echo", ["input string"]);
+
+The value of `options` string passed to the `Echo.echo` method is
+JSON:
+
+        "[\"input string\"]"
+
+All JavaScript `exec` arguments are JSON-encoded before being passed
+into C#, and so need to be decoded:
+
+        string optVal = JsonHelper.Deserialize<string[]>(options)[0];
+        // optVal now has the value of "input string"
+
+## Passing Results from C# to JavaScript
+
+The `BaseCommand` class provides methods to pass data to JavaScript
+callback handlers.  If you simply want to signal success with no
+accompanying result, you can simply call:
+
+        DispatchCommandResult();
+        // calls back with an empty plugin result, considered a success callback
+
+To pass data back, you need to call `DispatchCommandResult`
+differently:
+
+        DispatchCommandResult(new PluginResult(PluginResult.Status.OK, "Everything went as planned, this is a result that is passed to the success handler."));
+
+Use an encoded JSON string to pass structured object data back to
+JavaScript:
+
+        DispatchCommandResult(new PluginResult(PluginResult.Status.OK, "{result:\"super awesome!\"}"));
+
+To signal an error, call `DispatchCommandResult` with a `PluginResult`
+object whose status is `ERROR`:
+
+        DispatchCommandResult(new PluginResult(PluginResult.Status.ERROR, "Echo signaled an error"));
+
+## Handling Serialization Errors
+
+When interpreting your arguments, `try`/`catch` blocks help screen out
+bad input. This pattern appears throughout the Cordova C# code:
+
+        string optVal = null;
+
+        try
+        {
+            optVal = JsonHelper.Deserialize<string[]>(options)[0];
+        }
+        catch(Exception)
+        {
+            // simply catch the exception, we handle null values and exceptions together
+        }
+
+        if (optVal == null)
+        {
+            DispatchCommandResult(new PluginResult(PluginResult.Status.JSON_EXCEPTION));
+        }
+        else
+        {
+            // ... continue on to do our work
+        }
+
+## Plugin XML
+
+The following shows how to use the `plugin.xml` file to specify a
+plugin's source files on the Windows Phone platform.  See Application
+Plugins for an overview, and Plugin Specification for details on
+available options.
+
+- The `<source-file>` element defines all plugin resources, such
+  as _.cs_, _.xaml_, _.xaml.cs_, and _.dll_ files, and image assets.
+
+- The `<config-file>` element defines elements to inject into a
+  configuration file. This example adds a plugin to the platform's
+  `config.xml` file:
+
+        <config-file target="config.xml" parent="/*">
+            <feature name="PluginName">
+                <param name="wp-package" value="PluginName"/>
+            </feature>
+        </config-file>
+
+  This example adds the contacts capability to the `WMAppManifest.xml`
+  file:
+
+        <config-file target="Properties/WMAppManifest.xml" parent="/Deployment/App/Capabilities">
+            <Capability Name="ID_CAP_CONTACTS" />
+        </config-file>
+
+## Debugging Plugins
+
+Use Visual Studio's debugger to debug a plugin's C# component. You can
+set a break point at any of the methods exposed by your class.
+
+JavaScript is more difficult to debug on Windows Phone. You need to
+use `console.log` to output the plugin's state, or to inform
+yourself of errors.
+
+## Common Pitfalls
+
+- Be careful not to pass arguments from JavaScript to the native side
+  that are difficult to deserialize as JSON. Most device platforms
+  expect the argument passed to `cordova.exec()` to be an array, such
+  as the following:
+
+        cordova.exec(win, fail, "ServiceName", "MethodName", ["this is a string", 54, {literal:'trouble'}]);
+
+  This may result in an overly complex string value for C# to decode:
+
+        "[\"this is a string\", 54, { literal:'trouble' }]"
+
+  Instead, consider converting _all_ parameters to strings before
+  calling `exec()`, and decoding each separately:
+
+        cordova.exec(win, fail, "ServiceName", "MethodName", ["this is a string", "54", "{literal:'trouble'}"]);
+        string[] optValues = JsonHelper.Deserialize<string[]>(options);
+
+- It is usually better to check parameters in JavaScript before
+  calling `exec()`. Doing so allows you to re-use more code and pull
+  unnecessary functionality from the plugin's various native
+  implementations.
diff --git a/docs/en/3.3.0/guide/platforms/wp8/tools.md b/docs/en/3.3.0/guide/platforms/wp8/tools.md
new file mode 100644
index 0000000..6294231
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/wp8/tools.md
@@ -0,0 +1,113 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+         
+           http://www.apache.org/licenses/LICENSE-2.0
+         
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Windows Phone Command-line Tools
+
+The `cordova` command-line utility is a high-level tool that allows
+you to build applications across several platforms at once. An older
+version of the Cordova framework provides sets of command-line tools
+specific to each platform. To use them as an alternative to the CLI,
+you need to download this version of Cordova from
+[cordova.apache.org](http://cordova.apache.org). The download contains
+separate archives for each platform. Expand the platform you wish to
+target. The tools described here are typically available in the
+top-level `bin` directory, otherwise consult the __README__ file for
+more detailed directions.
+
+For information on the low-level command-line interface that enables
+plugins, see Using Plugman to Manage Plugins. See Application Plugins
+for an overview.
+
+## Windows Phone
+
+The Windows Phone command-line tools support creating, building, and
+running new projects. Commands must be run from a cmd or powershell
+prompt.
+
+The WP8 repo now includes code for building both WP7 + WP8 apps.  The
+repo has subdirectories for each: `wp7/` and `wp8/`.
+
+## Create a Project
+
+There are 2 ways to go about creating a new Apache Cordova WP7 or WP8 application.
+
+### Run the Batch File to Create and Install the Templates
+
+- The root of the repo contains a `createTemplates.bat` file.
+  Double-clicking it generates two `.zip` files:
+  `CordovaWP7_x_x_x.zip` and `CordovaWP8_x_x_x.zip`, where _3.3.0_
+  represents the current version number. To easily use these files in
+  Visual Studio, copy them to `My Documents\Visual Studio
+  2012\Templates\ProjectTemplates\`. You are then able to create
+  new Apache Cordova Windows Phone apps from Visual Studio's
+  __File &rarr; New Project__ menu.
+
+- If you run the batch file from the command line, you can also call with a parameter to install automatically
+
+Run the script :
+
+    >createTemplates.bat -install
+
+### Use the Create Scripts on the Command Line
+
+Run the `create` command, specifying the existing path to the project,
+the reverse-domain-style package identifier, and the app's display
+name.  Here is the syntax for both Windows Phone 7 and 8:
+
+    >.\wp7\bin\create PathToNewProject [ PackageName ] [ AppName ]
+    >.\wp8\bin\create PathToNewProject [ PackageName ] [ AppName ]
+
+    >PathToNewProject : The path to where you wish to create the project
+    >PackageName      : The namespace for the project (default is Cordova.Example)
+    >AppName          : The name of the application (default is CordovaWP8AppProj or CordovaWP7AppProj)
+
+    >examples:
+    >.\wp7\bin\create C:\path\to\my_new_project
+    >.\wp8\bin\create C:\path\to\my_new_project io.cordova.example CordovaWP8App
+
+Launch Visual Studio and open Solution file (.sln) in (C:\path\to\my_new_project)
+
+Build and Run it
+
+## Building the Project (Clean, then Build)
+
+* Debug
+
+    $ C:\path\to\my_new_project\cordova\build --debug
+
+* Release
+
+    $ C:\path\to\my_new_project\cordova\build --release
+
+## Running the App
+
+Run the 'run' command with the following *optional* parameters
+
+* Target specification. This includes `--emulator`, `--device`, or `--target=<targetID>`.
+
+* Build specification. This includes `--debug`, `--release`, or `--nobuild`.
+
+    $ C:\path\to\my_new_project\cordova\run [Target] [Build]
+
+By default the `run` command is called with `--emulator --debug` if flags are not provided.
+
+## Cleaning
+
+    $ C:\path\to\my_new_project\cordova\clean
+
diff --git a/docs/en/3.3.0/guide/platforms/wp8/upgrading.md b/docs/en/3.3.0/guide/platforms/wp8/upgrading.md
new file mode 100644
index 0000000..3c5a1f3
--- /dev/null
+++ b/docs/en/3.3.0/guide/platforms/wp8/upgrading.md
@@ -0,0 +1,435 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Upgrading Windows Phone
+
+This guide shows how to modify Windows Phone projects, both versions 7
+and 8, to upgrade from older versions of Cordova.  Most of these
+instructions apply to projects created with an older set of
+command-line tools that precede the `cordova` CLI utility. See The
+Command-Line Interface for information how to update the version of
+the CLI.  The following section shows how to upgrade from non-CLI
+projects.
+
+## Upgrade to 3.2.0 from 3.1.0
+
+For projects that were created with the cordova CLI: 
+
+1. Update the `cordova` CLI version. See The Command-Line Interface. 
+
+2. Run `cordova platform update wp8` (or `wp7`, per the platforms you added to your project).
+        
+For projects not created with the cordova CLI, run:
+
+        bin\update <project_path>
+
+## Upgrade to 3.1.0 from 3.0.0
+
+For projects that were created with the cordova CLI: 
+
+1. Update the `cordova` CLI version. See The Command-Line Interface. 
+
+2. Run `cordova platform update wp8` (or `wp7`, per the platforms you added to your project).
+        
+For projects not created with the cordova CLI, run:
+
+        bin\update <project_path>
+
+## Upgrade to the CLI (3.0.0) from 2.9.0
+
+1. Create a new Apache Cordova 3.0.0 project using the cordova CLI, as
+   described in The Command-Line Interface.
+
+2. Add your platforms to the cordova project, for example: `cordova
+   platform add wp7 wp8`.
+
+3. Copy the contents of the project's `www` directory to the `www` directory
+   at the root of the cordova project you just created.
+
+4. Copy or overwrite any native assets from your original project
+   (`SplashScreen`, `ApplicationIcon`, etc.), making sure to add any
+   new files to the `.csproj` file. The windows phone project builds
+   inside the `platforms\wp7` or `platforms\wp8` directory.
+
+5. Use the cordova CLI tool to install any plugins you need. Note that
+   the CLI handles all core APIs as plugins, so they may need to be
+   added. Only 3.0.0 plugins are compatible with the CLI.
+
+6. Build and test.
+
+## Upgrade to 3.0.0 (non-CLI) from 2.9.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 3.0.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Copy and overwrite any splash screen, or icon images.
+
+4. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project. 
+
+5. Build and test.
+
+__NOTE__: all core APIs are removed from Cordova version 3.0, and must
+be installed separately as plugins.  For more information on how to
+re-enable these features in a non-CLI workflow, see Using Plugman to
+Manage Plugins.
+
+## Upgrade to 2.9.0 from 2.8.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 2.9.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update the name of `cordova.js` in the HTML tag if it's still using cordova-VERSION.js (should be just `cordova.js`).
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the .csproj file.
+
+6. Build and test.
+
+## Upgrade to 2.8.0 from 2.7.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 2.8.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova.js` file. (Note the lack of a version number in the filename.)
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.7.0 from 2.6.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 2.7.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.7.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.6.0 from 2.5.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 2.6.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.6.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.5.0 from 2.4.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 2.5.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.5.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.4.0 from 2.3.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 or WP8 2.4.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.4.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.3.0 from 2.2.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 2.3.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.3.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.2.0 from 2.1.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 2.2.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.2.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.1.0 from 2.0.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 2.1.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.1.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 2.0.0 from 1.9.0
+
+There have been considerable changes to the WP7 project structure in Apache Cordova 2.0.0 which make this upgrade a little more involved that the others. Essentially this is not an upgrade but creation of a new project and copy over of existing source files.
+
+In Visual Studio's Solution Explorer window:
+
+1. Create a new Apache Cordova WP7 2.0 Project.
+
+2. Copy the contents of your `www` directory to the new project, and be sure these items are added to the VS project.
+
+3. Update your HTML to use the new `cordova-2.0.0.js` file.
+
+4. Copy and overwrite any splash screen, or icon images.
+
+5. Copy over any plugins from the `plugins` directory to the new project and ensure that they are also added to the VS project.
+
+6. Build and test.
+
+## Upgrade to 1.9.0 from 1.8.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.9.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.9.0.js` file.
+
+## Upgrade to 1.8.0 from 1.7.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.8.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.8.0.js` file.
+
+## Upgrade to 1.7.0 from 1.6.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.7.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.7.0.js` file.
+
+## Upgrade to 1.6.1 from 1.6.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.6.1.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.6.1.js` file.
+
+## Upgrade to 1.6.0 from 1.5.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.6.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.6.0.js` file.
+
+## Upgrade to 1.5.0 from 1.4.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.5.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.5.0.js` file.
+
+## Upgrade to 1.4.0 from 1.3.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.4.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.4.0.js` file.
+
+## Upgrade to 1.3.0 from 1.2.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.3.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.3.0.js` file.
+
+## Upgrade to 1.2.0 from 1.1.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: You can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.2.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.2.0.js` file.
+
+## Upgrade to 1.1.0 from 1.0.0
+
+In Visual Studio's Solution Explorer window:
+
+1. Delete `GapLib/WP7CordovaClassLib.dll` from your project.
+
+2. Remove the reference to `WP7CordovaClassLib` in the __References__ directory.
+
+3. Right-click on __References__ and select __Add Reference__.
+
+4. Navigate to the new distribution and add the `WP7CordovaClassLib.dll` file.
+
+    __NOTE__: you can view the DLL's version by right-clicking on the reference, and selecting __Properties__.
+
+5. Copy the new `cordova-1.1.0.js` into your project. (Be sure it is marked as Content.)
+
+6. Update your HTML to use the new `cordova-1.1.0.js` file.
diff --git a/docs/en/3.3.0/guide/support/index.md b/docs/en/3.3.0/guide/support/index.md
new file mode 100644
index 0000000..8a45aa6
--- /dev/null
+++ b/docs/en/3.3.0/guide/support/index.md
@@ -0,0 +1,303 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+
+---
+
+# Platform Support
+
+The following shows the set of development tools and device APIs
+available for each mobile platform. (Column headers display the
+CLI's shorthand stubs.)
+
+<!-- START HTML -->
+
+<table class="compat" width="100%">
+
+<thead>
+    <tr>
+        <th></td>
+        <th><tt>amazon-fireos</tt></th>
+        <th><tt>android</tt></th>
+        <th><tt>blackberry10</tt></th>
+        <th><tt>ios</tt></th>
+        <th><tt>wp7</tt> (Windows<br/>Phone 7)</th>
+        <th><tt>wp8</tt> (Windows<br/>Phone 8)</th>
+        <th><tt>win8</tt><br/>(Windows 8)</th>
+<!--        <th><tt>firefoxos</tt></th> -->
+        <th><tt>tizen</tt></th>
+    </tr>
+
+</thead>
+
+<tbody>
+    <tr>
+        <th><a href="guide_cli_index.md.html">cordova<br/>CLI</a></th>
+        <td data-col="amazon-fireos" class="y">Mac, Windows, Linux</td>
+        <td data-col="android"    class="y">Mac, Windows, Linux</td>
+        <td data-col="blackberry10" class="y">Mac, Windows</td>
+        <td data-col="ios"        class="y">Mac</td>
+        <td data-col="winphone7"  class="y">Windows</td>
+        <td data-col="winphone8"  class="y">Windows</td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="guide_hybrid_webviews_index.md.html">Embedded<br/>WebView</a></th>
+        <td data-col="amazon-fireos" class="y"><a href="guide_platforms_amazonfireos_webview.md.html">(see details)</a></td>
+        <td data-col="android"    class="y"><a href="guide_platforms_android_webview.md.html">(see details)</a></td>
+        <td data-col="blackberry10" class="n"></td>
+        <td data-col="ios"        class="y"><a href="guide_platforms_ios_webview.md.html">(see details)</a></td>
+        <td data-col="winphone7"  class="n"></td>
+        <td data-col="winphone8"  class="n"></td>
+        <td data-col="win8"       class="n"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="guide_hybrid_plugins_index.md.html">Plug-in<br/>Interface</a></th>
+         <td data-col="amazon-fireos" class="y"><a href="guide_guide_platforms_amazonfireos_plugin.md.html">(see details)</a></td>
+        <td data-col="android"    class="y"><a href="guide_guide_platforms_android_plugin.md.html">(see details)</a></td>
+        <td data-col="blackberry10" class="y"><a href="guide_guide_platforms_blackberry10_plugin.md.html">(see details)</a></td>
+        <td data-col="ios"        class="y"><a href="guide_guide_platforms_ios_plugin.md.html">(see details)</a></td>
+        <td data-col="winphone7"  class="y"><a href="guide_guide_platforms_wp8_plugin.md.html">(see details)</a></td>
+        <td data-col="winphone8"  class="y"><a href="guide_guide_platforms_wp8_plugin.md.html">(see details)</a></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th></th>
+        <th colspan="20">Platform APIs</th>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_accelerometer_accelerometer.md.html">Accelerometer</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_camera_camera.md.html">Camera</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_media_capture_capture.md.html">Capture</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="n"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_compass_compass.md.html">Compass</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y">(3GS+)</td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_connection_connection.md.html">Connection</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_contacts_contacts.md.html">Contacts</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="n"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_device_device.md.html">Device</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_events_events.md.html">Events</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_file_file.md.html">File</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_geolocation_geolocation.md.html">Geolocation</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_globalization_globalization.md.html">Globalization</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="n"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="n"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_inappbrowser_inappbrowser.md.html">InAppBrowser</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="p">uses iframe</td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_media_media.md.html">Media</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_notification_notification.md.html">Notification</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_splashscreen_splashscreen.md.html">Splashscreen</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y"></td>
+        <td data-col="winphone8"  class="y"></td>
+        <td data-col="win8"       class="y"></td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="n"></td>
+    </tr>
+
+    <tr>
+        <th><a href="cordova_storage_storage.md.html">Storage</a></th>
+        <td data-col="amazon-fireos" class="y"></td>
+        <td data-col="android"    class="y"></td>
+        <td data-col="blackberry10" class="y"></td>
+        <td data-col="ios"        class="y"></td>
+        <td data-col="winphone7"  class="y">localStorage &amp; indexedDB</td>
+        <td data-col="winphone8"  class="y">localStorage &amp; indexedDB</td>
+        <td data-col="win8"       class="y">localStorage &amp; indexedDB</td>
+<!--        <td data-col="firefoxos"  class="n"></td> -->
+        <td data-col="tizen"       class="y"></td>
+    </tr>
+
+</tbody>
+</table>
+
+<!-- END HTML -->
diff --git a/docs/en/3.3.0/index.md b/docs/en/3.3.0/index.md
new file mode 100644
index 0000000..7a2e8cc
--- /dev/null
+++ b/docs/en/3.3.0/index.md
@@ -0,0 +1,142 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+<div id="home">
+
+    <h1>Guides</h1>
+    <ul>
+        <li>
+            <h2>Overview</h2>
+            <span>Start here if you are new to Cordova.</span>
+        </li>
+        <li>
+            <h2>Platform Support</h2>
+            <span>Compatibility table for all major features.</span>
+        </li>
+        <li>
+            <h2>The Command-Line Interface</h2>
+            <span>Create, build, and deploy from the command-line.</span>
+        </li>
+        <li>
+            <h2>Platform Guides</h2>
+            <span>Set up each SDK and update projects</span>
+        </li>
+        <li>
+         <h2>Using Plugman to Manage Plugins</h2>
+            <span>Using Plugman to manage Plugins without the CLI</span>
+        </li>
+        <li>
+            <h2>The config.xml File</h2>
+            <span>Customize the features of your app.</span>
+        </li>
+        <li>
+            <h2>Icons and Splash Screens</h2>
+            <span>Customize the app's displaying images.</span>
+        </li>
+        <li>
+            <h2>Embedding WebViews</h2>
+            <span>Implement the Cordova WebView in your project.</span>
+        </li>
+        <li>
+            <h2>Plugin Development Guide</h2>
+            <span>Develop your first plugin.</span>
+        </li>
+        <li>
+            <h2>Privacy Guide</h2>
+            <span>Learn about important mobile privacy issues.</span>
+        </li>
+        <li>
+            <h2>Whitelist Guide</h2>
+            <span>Grant an application access to external resources.</span>
+        </li>
+        <li>
+            <h2><a href="_index.html">Keyword Index</a></h2>
+            <span>Full index of the documentation.</span>
+        </li>
+    </ul>
+
+    <h1>API Reference</h1>
+    <ul>
+        <li>
+            <h2>Accelerometer</h2>
+            <span>Tap into the device's motion sensor.</span>
+        </li>
+        <li>
+            <h2>Camera</h2>
+            <span>Capture a photo using the device's camera.</span>
+        </li>
+        <li>
+            <h2>Capture</h2>
+            <span>Capture media files using device's media capture applications.</span>
+        </li>
+        <li>
+            <h2>Compass</h2>
+            <span>Obtain the direction that the device is pointing.</span>
+        </li>
+        <li>
+            <h2>Connection</h2>
+            <span>Quickly check the network state, and cellular network information.</span>
+        </li>
+        <li>
+            <h2>Contacts</h2>
+            <span>Work with the devices contact database.</span>
+        </li>
+        <li>
+            <h2>Device</h2>
+            <span>Gather device specific information.</span>
+        </li>
+        <li>
+            <h2>Events</h2>
+            <span>Hook into native events through JavaScript.</span>
+        </li>
+        <li>
+            <h2>File</h2>
+            <span>Hook into native file system through JavaScript.</span>
+        </li>
+        <li>
+            <h2>Geolocation</h2>
+            <span>Make your application location aware.</span>
+        </li>
+        <li>
+            <h2>Globalization</h2>
+            <span>Enable representation of objects specific to a locale.</span>
+        </li>
+        <li>
+            <h2>InAppBrowser</h2>
+            <span>Launch URLs in another in-app browser instance.</span>
+        </li>
+        <li>
+            <h2>Media</h2>
+            <span>Record and play back audio files.</span>
+        </li>
+        <li>
+            <h2>Notification</h2>
+            <span>Visual, audible, and tactile device notifications.</span>
+        </li>
+        <li>
+            <h2>Splashscreen</h2>
+            <span>Show and hide the applications splash screen.</span>
+        </li>
+        <li>
+            <h2>Storage</h2>
+            <span>Hook into the devices native storage options.</span>
+        </li>
+    </ul>
+
+</div>
diff --git a/docs/en/3.3.0/plugin_ref/plugman.md b/docs/en/3.3.0/plugin_ref/plugman.md
new file mode 100644
index 0000000..33442cc
--- /dev/null
+++ b/docs/en/3.3.0/plugin_ref/plugman.md
@@ -0,0 +1,193 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Using Plugman to Manage Plugins
+
+From version 3.0 onward, Cordova implements all device APIs as
+plugins, and leaves them disabled by default. It also supports two
+different ways to add and remove plugins. The first is by using the
+`cordova` CLI described in The Command-Line Interface. The second is
+by using a lower-level
+[Plugman](https://github.com/apache/cordova-plugman/)
+command-line interface ("Native platform dev" workflow.) The main difference between these two development
+paths is that Plugman can only add plugins to one platform at a time, whereas the CLI will add plugins
+to all of the platforms that you are targeting.  Because of this, it makes more sense to use Plugman when
+you are working closely with a single platform, hence the "Native Platform Dev" name of the workflow. 
+
+For more information on Plugman, especially if you are interested in consuming Plugman as a node module 
+or hacking on the Plugman code, see [the README file in its repository](https://github.com/apache/cordova-plugman/blob/master/README.md).
+
+## Installing Plugman
+
+To install plugman, you must have [node](http://nodejs.org/) installed
+on your machine. Then you can run the following command from anywhere in your environment to install plugman globally, so that it
+is available from any directory on your machine:
+
+    $ npm install -g plugman
+
+You must have also have `git` on your `PATH` to be able to install plugins directly from remote git URLs.
+
+**TIP:** If you find that after installing plugman with npm you are still unable to run any `plugman` commands, make sure that you have
+added the `/npm/` directory into your `PATH`. 
+
+**NOTE:** You can skip this step if you don't want to pollute your global npm namespace by installing Plugman globally. If this is the case, then
+when you create a Cordova project with the shell tools, there will be a `node_modules` directory inside your project which contains Plugman. 
+Since you did not instally globally, you will have to invoke node for every Plugman command, for example `node ./node_modules/plugman/main.js -version`.
+The rest of this guide assumes you have installed Plugman globally, meaning you can invoke it with just `plugman`. 
+
+## Create a Cordova Project
+
+Before you can use Plugman, you must create a Cordova project.  You can do this with either the Command-line Interface or with
+the lower level shell scripts. Instructions for using the shell scripts to create your project are located in the various "Command-line Tools" guides
+listed on the Platform Guides page. 
+
+## Adding a Plugin
+
+Once you have installed Plugman and have created a Cordova project, you can start adding plugins to the platform with:
+
+    $ plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin <name|url|path> [--plugins_dir <directory>] [--www <directory>] [--variable <name>=<value> [--variable <name>=<value> ...]]
+
+Using minimum parameters, this command installs a plugin into a cordova project. You must specify a platform and cordova project location for that platform. You also must specify a plugin, with the different `--plugin` parameter forms being:
+
+  * `name`: The directory name where the plugin contents exist. This must be an existing directory under the `--plugins_dir` path (see below for more info) or a plugin in the Cordova registry.
+  * `url`: A URL starting with https:// or git://, pointing to a valid git repository that is clonable and contains a `plugin.xml` file. The contents of this repository would be copied into the `--plugins_dir`.
+  * `path`: A path to a directory containing a valid plugin which includes a `plugin.xml` file. This path's contents will be copied into the `--plugins_dir`.
+  
+Other parameters: 
+
+* `--plugins_dir` defaults to `<project>/cordova/plugins`, but can be any directory containing a subdirectory for each fetched plugin.
+* `--www` defaults to the project's `www` folder location, but can be any directory that is to be used as cordova project application web assets.
+* `--variable` allows to specify certain variables at install time, necessary for certain plugins requiring API keys or other custom, user-defined parameters. Please see the [plugin specification](plugin_spec.md) for more information.
+
+## Remove a Plugin
+
+To uninstall a plugin, you simply pass the `--uninstall` flag and provide the plugin ID.
+
+    $ plugman --uninstall --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin <id> [--www <directory>] [--plugins_dir <directory>]
+
+
+## Help Commands
+
+Plugman features a global help command which may help you if you get stuck or are experiencing problems. It will display
+a list of all available Plugman commands and their syntax:
+
+    plugman -help
+    plugman  # same as above
+
+   **NOTE**: `plugman -help` may show some additional registry-related commands. These commands are for plugin developers and may not be implemented on third-party plugin registries.
+
+
+You can also append the `--debug|-d` flag to any Plugman command to run that command in verbose mode, which will display
+any internal debugging messages as they are emitted and may help you track down problems like missing files. 
+
+    # Adding Android battery-status plugin to "myProject":
+    plugman -d --platform android --project myProject --plugin org.apache.cordova.battery-status
+
+Finally, you can use the `--version|-v` flag to see which version of Plugman you are using.
+
+    plugman -v
+    
+## Registry Actions
+
+There are a number of plugman commands that can be used for interacting with the [Plugin registry](http://plugins.cordova.io).
+Please note that these registry commands are specific to the _plugins.cordova.io_ plugin registry and may not be implemented by
+third-party plugin registries.
+
+### Searching for a Plugin
+
+You can use Plugman to search the [Plugin registry](http://plugins.cordova.io) for plugin id's that match the given space separated list of keywords.
+
+    plugman search <plugin keywords>
+
+### Changing the Plugin Registry
+
+You can get or set the URL of the current plugin registry that plugman is using. Generally you should leave this set at http://registry.cordova.io unless you want to use a third party plugin registry.
+
+    plugman config set registry <url-to-registry>
+    plugman config get registry
+
+### Get Plugin Information
+
+You can get information about any specific plugin stored in the plugin repository with:
+
+    plugman info <id>
+
+This will contact the plugin registry and fetch information such as the plugin's version number. 
+
+## Installing Core Plugins
+
+The examples below show how to add plugins as needed so that any
+Cordova APIs you use in your project still work after you upgrade to
+version 3.0.  For each command, you need to select the target
+platform, and reference the platform's project directory.
+
+* cordova-plugin-battery-status
+
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.battery-status
+
+* cordova-plugin-camera
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.camera
+    
+* cordova-plugin-console
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.console
+
+* cordova-plugin-contacts
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.contacts
+    
+* cordova-plugin-device
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.device
+
+* cordova-plugin-device-motion (accelerometer)
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.device-motion
+
+* cordova-plugin-device-orientation (compass)
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.device-orientation
+
+* cordova-plugin-dialogs
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.dialogs
+
+* cordova-plugin-file
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.file
+
+* cordova-plugin-file-transfer
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.file-transfer
+
+* cordova-plugin-geolocation
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.geolocation
+
+* cordova-plugin-globalization
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.globalization
+
+* cordova-plugin-inappbrowser
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.inappbrowser
+
+* cordova-plugin-media
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.media
+
+* cordova-plugin-media-capture
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.media-capture
+
+* cordova-plugin-network-information
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.network-information
+
+* cordova-plugin-splashscreen
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.splashscreen
+
+* cordova-plugin-vibration
+    plugman --platform <ios|amazon-fireos|android|blackberry10|wp7|wp8> --project <directory> --plugin org.apache.cordova.vibration
diff --git a/docs/en/3.3.0/plugin_ref/spec.md b/docs/en/3.3.0/plugin_ref/spec.md
new file mode 100644
index 0000000..f4a6bdf
--- /dev/null
+++ b/docs/en/3.3.0/plugin_ref/spec.md
@@ -0,0 +1,579 @@
+---
+license: Licensed to the Apache Software Foundation (ASF) under one
+         or more contributor license agreements.  See the NOTICE file
+         distributed with this work for additional information
+         regarding copyright ownership.  The ASF licenses this file
+         to you under the Apache License, Version 2.0 (the
+         "License"); you may not use this file except in compliance
+         with the License.  You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing,
+         software distributed under the License is distributed on an
+         "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+         KIND, either express or implied.  See the License for the
+         specific language governing permissions and limitations
+         under the License.
+---
+
+# Plugin Specification
+
+The `plugin.xml` file is an XML document in the `plugins` namespace:
+`http://apache.org/cordova/ns/plugins/1.0`. It contains a top-level
+`plugin` element that defines the plugin, and children that define the
+structure of the plugin.
+
+A sample plugin element:
+
+    <?xml version="1.0" encoding="UTF-8"?>
+    <plugin xmlns="http://apache.org/cordova/ns/plugins/1.0"
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        id="com.alunny.foo"
+        version="1.0.2">
+
+## _plugin_ Element
+
+The `plugin` element is the plugin manifest's top-level element. It
+features the following attributes:
+
+* `xmlns` (required):
+  The plugin namespace, `http://apache.org/cordova/ns/plugins/1.0`. If
+  the document contains XML from other namespaces, such as tags to be
+  added to the `AndroidManifest.xml` file, those namespaces should
+  also be included in the top-level element.
+
+* `id` (required):
+  A reverse-domain style identifier for the plugin, such as
+  `com.alunny.foo`
+
+* `version` (required):
+  A version number for the plugin, that matches the following
+  major-minor-patch style regular expression:
+
+        ^\d+[.]\d+[.]\d+$
+
+## _engines_ and _engine_ Elements
+
+The child elements of the `<engines>` element specify versions of
+Apache Cordova-based frameworks that this plugin supports. An example:
+
+    <engines>
+        <engine name="cordova" version="1.7.0" />
+        <engine name="cordova" version="1.8.1" />
+        <engine name="worklight" version="1.0.0" platform="android" scriptSrc="worklight_version"/>
+    </engines>
+
+Similar to the `<plugin>` element's `version` attribute, the specified
+version string should match a major-minor-patch string conforming to
+the regular expression:
+
+        ^\d+[.]\d+[.]\d+$
+
+Engine elements may also specify fuzzy matches to avoid repetition,
+and to reduce maintenance when the underlying platform is updated.
+Tools should support a minimum of `>`, `>=`, `<` and `<=`, for
+example:
+
+    <engines>
+        <engine name="cordova" version=">=1.7.0" />
+        <engine name="cordova" version="<1.8.1" />
+    </engines>
+
+The `<engine>` tags also has default support for all of the main platforms Cordova exists on. 
+Specifying the `cordova` engine tag means that all versions of Cordova on any platform must
+satisfy the engine version attribute. You may also list specific platforms and their versions
+in order to override the catch-all `cordova` engine:
+
+    <engines>
+        <engine name="cordova" version=">=1.7.0" />
+        <engine name="cordova-android" version=">=1.8.0" />
+        <engine name="cordova-ios" version=">=1.7.1" />
+    </engines>
+
+Here's a list of the default engines that the '<engine>' tag supports:
+* 'cordova' 
+* 'cordova-plugman' 
+* 'cordova-amazon-fireos'
+* 'cordova-android'
+* 'cordova-ios'
+* 'cordova-blackberry10' 
+* 'cordova-wp7'
+* 'cordova-wp8'
+* 'cordova-windows8'  
+* 'android-sdk' // returns the highest Android api level installed
+* 'apple-xcode' // returns the xcode version 
+* 'apple-ios' // returns the highest iOS version installed
+* 'apple-osx' // returns the OSX version
+* 'blackberry-ndk' // returns the native blackberry SDK version
+        
+Specifying custom Apache Cordova-based frameworks should be listed under the engine tag like so:
+
+    <engines>
+        <engine name="my_custom_framework" version="1.0.0" platform="android" scriptSrc="path_to_my_custom_framework_version"/>
+        <engine name="another_framework" version=">0.2.0" platform="ios|android" scriptSrc="path_to_another_framework_version"/>
+        <engine name="even_more_framework" version=">=2.2.0" platform="*" scriptSrc="path_to_even_more_framework_version"/>
+    </engines>
+
+A custom Apache Cordova-based framework requires that an engine element includes the following attributes: 
+`name`, `version`, `scriptSrc`, and `platform`. 
+
+* `name` (required): A human-readable name for your custom framework. 
+
+* `version` (required): The version that your framework must have in order to install.
+
+* `scriptSrc` (required): The script file that tells plugman what version of the custom framework is. 
+Ideally, this file should be within the top level directory of your plugin directory.
+
+* `platform` (required): Which platforms that your framework supports. You may use the wildcard `*`
+to say supported for all platforms, specify multiple with a pipe character like `android|ios|blackberry10` 
+or just a single platform like `android`.
+
+plugman aborts with a non-zero code for any plugin whose target
+project does not meet the engine's constraints.
+
+If no `<engine>` tags are specified, plugman attempts to install into
+the specified cordova project directory blindly.
+
+## _name_ Element
+
+A human-readable name for the plugin, whose text content contains the
+name of the plugin. For example:
+
+    <name>Foo</name>
+
+This element does not (yet) handle localization.
+
+## _description_ Element
+
+A human-readable description for the plugin. The text content of the element contains
+the description of the plugin. An example:
+
+    <description>Foo plugin description</description>
+
+This element does not (yet) handle localization.
+
+## _author_ Element
+
+Plugin author name. The text content of the element contains
+the name of the plugin author. An example:
+
+    <author>Foo plugin description</author>
+
+## _keywords_ Element
+
+Plugin keywords. The text content of the element contains comma separated keywords to describe the plugin. An example:
+
+    <keywords>foo,bar</keywords>
+
+## _license_ Element
+
+Plugin license. The text content of the element contains the plugin license. An example:
+
+    <license>Apache 2.0 License</license>
+
+## _asset_ Element
+
+One or more elements listing the files or directories to be copied
+into a Cordova app's `www` directory. Examples:
+
+    <!-- a single file, to be copied in the root directory -->
+    <asset src="www/foo.js" target="foo.js" />
+    <!-- a directory, also to be copied in the root directory -->
+    <asset src="www/foo" target="foo" />
+
+All `<asset>` tags require both `src` and `target` attributes.
+Web-only plugins contains mostly `<asset>` elements. Any `<asset>`
+elements that are nested within `<platform>` elements specify
+platform-specific web assets, as described below. Attributes include:
+
+* `src` (required): 
+  Where the file or directory is located in the plugin package,
+  relative to the `plugin.xml` document.  If a file does not exist at
+  the specified `src` location, plugman stops and reverses the
+  installation process, issues a notification about the conflict, and
+  exits with a non-zero code.
+
+* `target` (required):
+
+  Where the file or directory should be located in the Cordova app,
+  relative to the `www` directory.
+  Assets can be targeted to subdirectories, for example:
+
+    <asset src="www/new-foo.js" target="js/experimental/foo.js" />
+
+  creates the `js/experimental` directory within the `www` directory,
+  unless already present, then copies the `new-foo.js` file and
+  renames it `foo.js`.  If a file already exists at the target
+  location, plugman stops and reverses the installation process,
+  issues a notification about the conflict, and exits with a non-zero
+  code.
+
+## _js-module_ Element
+
+Most plugins include one or more JavaScript files.  Each `<js-module>`
+tag corresponds to a JavaScript file, and prevents the plugin's users
+from having to add a `<script>` tag for each file.  While `<asset>`
+tags simply copy a file from the plugin subdirectory into `www`,
+`<js-module>` tags are much more sophisticated. They look like this:
+
+    <js-module src="socket.js" name="Socket">
+        <clobbers target="chrome.socket" />
+    </js-module>
+
+When installing a plugin with the example above, `socket.js` is copied
+to `www/plugins/my.plugin.id/socket.js`, and added as an entry to
+`www/cordova_plugins.js`. At load time, code in `cordova.js` uses XHR
+to read each file and inject a `<script>` tag into HTML. It adds a
+mapping to clobber or merge as appropriate, as described below.
+
+_Do not_ wrap the file with `cordova.define`, as it is added
+automatically. The module is wrapped in a closure, with `module`,
+`exports`, and `require` in scope, as is normal for AMD modules.
+
+Details for the `<js-module>` tag:
+
+* The `src` references a file in the plugin directory relative to the
+  `plugin.xml` file.
+
+* The `name` provides the last part of the module name. It can
+  generally be whatever you like, and it only matters if you want to
+  use `cordova.require` to import other parts of your plugins in your
+  JavaScript code. The module name for a `<js-module>` is your
+  plugin's `id` followed by the value of `name`. For the example
+  above, with an `id` of `chrome.socket`, the module name is
+  `chrome.socket.Socket`.
+
+* Three tags are allowed within `<js-module>`:
+
+    - `<clobbers target="some.value"/>` indicates that the
+      `module.exports` is inserted into the `window` object as
+      `window.some.value`. You can have as many `<clobbers>` as you
+      like. Any object not available on `window` is created.
+
+    - `<merges target="some.value"/>` indicates that the module
+      should be merged with any existing value at `window.some.value`.
+      If any key already exists, the module's version overrides the
+      original. You can have as many `<merges>` as you like. Any
+      object not available on `window` is created.
+
+    - `<runs/>` means that your code should be specified with
+      `cordova.require`, but not installed on the `window`
+      object. This is useful when initializing the module, attaching
+      event handlers or otherwise. You can only have up to one
+      `<runs/>` tag. Note that including a `<runs/>` with
+      `<clobbers/>` or `<merges/>` is redundant, since they also
+      `cordova.require` your module.
+
+    - An empty `<js-module>` still loads and can be acccessed in other
+      modules via `cordova.require`.
+
+If `src` does not resolve to an existing file, plugman stops and
+reverses the installation, issues a notification of the problem, and
+exits with a non-zero code.
+
+Nesting `<js-module>` elements within `<platform>` declares
+platform-specific JavaScript module bindings.
+
+## _dependency_ Element
+
+The `<dependency>` tag allows you to specify other plugins on which the
+current plugin depends. While future versions will access them from
+plugin repositories, in the short term plugins are directly referenced
+as URLs by `<dependency>` tags. They are formatted as follows:
+
+    <dependency id="com.plugin.id" url="https://github.com/myuser/someplugin" commit="428931ada3891801" subdir="some/path/here" />
+
+* `id`: provides the ID of the plugin. It should be globally unique,
+  and expressed in reverse-domain style. While neither of these
+  restrictions is currently enforced, they may be in the future.
+
+* `url`: A URL for the plugin. This should reference a git repository,
+  which plugman attempts to clone.
+
+* `commit`: This is any git reference understood by `git checkout`: a
+  branch or tag name (e.g., `master`, `0.3.1`), or a commit hash (e.g.,
+  `975ddb228af811dd8bb37ed1dfd092a3d05295f9`).
+
+* `subdir`: Specifies that the targeted plugin dependency exists as a
+  subdirectory of the git repository. This is helpful because it
+  allows the repository to contain several related plugins, each
+  specified individually.
+
+In the future, version constraints will be introduced, and a plugin
+repository will exist to support fetching by name instead of explicit
+URLs.
+
+### Relative Dependency Paths
+
+If you set the `url` of a `<dependency>` tag to `"."` and provide a
+`subdir`, the dependent plugin is installed from the same local or
+remote git repository as the parent plugin that specifies the
+`<dependency>` tag.
+
+Note that the `subdir` always specifies a path relative to the _root_
+of the git repository, not the parent plugin. This is true even if you
+installed the plugin with a local path directly to it. Plugman finds
+the root of the git repository and then finds the other plugin from
+there.
+
+## _platform_ Element
+
+The `<platform>` tag identifies platforms that have associated native
+code or require modifications to their configuration files. Tools
+using this specification can identify supported platforms and install
+the code into Cordova projects.
+
+Plugins without `<platform>` tags are assumed to be JavaScript-only,
+and therefore installable on any and all platforms.
+
+A sample platform tag:
+
+    <platform name="android">
+        <!-- android-specific elements -->
+    </platform>
+    <platform name="ios">
+        <!-- ios-specific elements -->
+    </platform>
+
+The required `name` attribute identifies a platform as supported,
+associating the element's children with that platform.
+
+Platform names should be lowercase. Platform names, as arbitrarily
+chosen, are listed:
+
+* amazon-fireos
+* android
+* bb10
+* ios
+* wp7
+* wp8
+
+## _source-file_ Element
+
+The `<source-file>` element identifies executable source code that
+should be installed into a project. Examples:
+
+    <!-- android -->
+    <source-file src="src/android/Foo.java"
+                    target-dir="src/com/alunny/foo" />
+    <!-- ios -->
+    <source-file src="src/ios/CDVFoo.m" />
+    <source-file src="src/ios/someLib.a" framework="true" />
+    <source-file src="src/ios/someLib.a" compiler-flags="-fno-objc-arc" />
+
+It supports the following attributes:
+
+* `src` (required):
+  Location of the file relative to `plugin.xml`.  If the `src` file
+  can't be found, plugman stops and reverses the installation, issues
+  a notification about the problem, and exits with a non-zero code.
+
+* `target-dir`:
+  A directory into which the files should be copied, relative to the
+  root of the Cordova project.  In practice, this is most important
+  for Java-based platforms, where a file in the `com.alunny.foo`
+  package must be located within the `com/alunny/foo` directory. For
+  platforms where the source directory is not important, this
+  attribute should be omitted.
+
+  As with assets, if the `target` of a `source-file` would overwrite
+  an existing file, plugman stops and reverses the installation,
+  issues a notification about the problem, and exits with a non-zero
+  code.
+
+* `framework` (iOS only):
+  If set to `true`, also adds the specified file as a framework to the
+  project.
+
+* `compiler-flags` (iOS only):
+  If set, assigns the specified compiler flags for the particular
+  source file.
+
+## _config-file_ Element
+
+Identifies an XML-based configuration file to be modified, where in
+that document the modification should take place, and what should be
+modified.
+
+Two file types that have been tested for modification with this
+element are `xml` and `plist` files.
+
+The `config-file` element only allows you to append new children to an
+XML document tree. The children are XML literals to be inserted in the
+target document.
+
+Example for XML:
+
+    <config-file target="AndroidManifest.xml" parent="/manifest/application">
+        <activity android:name="com.foo.Foo" android:label="@string/app_name">
+            <intent-filter>
+            </intent-filter>
+        </activity>
+    </config-file>
+
+Example for `plist`:
+
+    <config-file target="*-Info.plist" parent="CFBundleURLTypes">
+        <array>
+            <dict>
+                <key>PackageName</key>
+                <string>$PACKAGE_NAME</string>
+            </dict>
+        </array>
+    </config-file>
+
+It supports the following attributes:
+
+* `target`:
+
+  The file to be modified, and the path relative to the root of the
+  Cordova project.
+
+  The target can include wildcard (`*`) elements. In this case,
+  plugman recursively searches through the project directory structure
+  and uses the first match.
+
+  On iOS, the location of configuration files relative to the project
+  directory root is not known, so specifying a target of `config.xml`
+  resolves to `cordova-ios-project/MyAppName/config.xml`.
+
+  If the specified file does not exist, the tool ignores the
+  configuration change and continues installation.
+
+* `parent`: An XPath selector referencing the parent of the elements
+  to be added to the config file. If you use absolute selectors, you
+  can use a wildcard (`*`) to specify the root element,
+  e.g., `/*/plugins`.
+
+  For `plist` files, the `parent` determines under what parent key the
+  specified XML should be inserted.
+
+  If the selector does not resolve to a child of the specified
+  document, the tool stops and reverses the installation process,
+  issues a warning, and exits with a non-zero code.
+
+## _plugins-plist_ Element
+
+This is _outdated_ as it only applies to cordova-ios 2.2.0 and
+below. Use the `<config-file>` tag for newer versions of Cordova.
+
+Example:
+
+    <config-file target="config.xml" parent="/widget/plugins">
+        <feature name="ChildBrowser">
+            <param name="ios-package" value="ChildBrowserCommand"/>
+        </feature>
+    </config-file>
+
+Specifies a key and value to append to the correct `AppInfo.plist`
+file in an iOS Cordova project. For example:
+
+    <plugins-plist key="Foo" string="CDVFoo" />
+
+## _resource-file_ and _header-file_ Elements
+
+Like source files, but specifically for platforms such as iOS that
+distinguish between source files, headers, and resources.  Examples:
+
+    <resource-file src="CDVFoo.bundle" />
+    <resource-file src="CDVFooViewController.xib" />
+    <header-file src="CDVFoo.h" />
+
+## _lib-file_ Element
+
+Like source, resource, and header files, but specifically for
+platforms such as BlackBerry 10 that use user-generated libraries.
+Examples:
+
+    <lib-file src="src/BlackBerry10/native/device/libfoo.so" arch="device" />
+    <lib-file src="src/BlackBerry10/native/simulator/libfoo.so" arch="simulator" />
+
+Supported attributes:
+
+* `src` (required):
+  The location of the file relative to `plugin.xml`.
+  If `src` can't be found, plugman stops and reverses the
+  installation, issues a warning about the problem, and exits with a
+  non-zero code.
+
+* `arch`: The architecture for which the `.so` file has been built,
+  either `device` or `simulator`.
+
+## _framework_ Element
+
+Identifies a framework (usually part of the OS/platform) on which the plugin depends.
+
+Examples:
+
+    <framework src="libsqlite3.dylib" />
+    <framework src="social.framework" weak="true" />
+
+The `src` attribute identifies the framework, which plugman attempts
+to add to the Cordova project, in the correct fashion for a given
+platform.
+
+The optional `weak` attribute is a boolean indicating whether the
+framework should be weakly linked. The default is `false`.
+
+## _info_ Element
+
+Additional information provided to users. This is useful when you
+require extra steps that can't be easily automated or are beyond
+plugman's scope.  Examples:
+
+    <info>
+    You need to install __Google Play Services__ from the `Android Extras` section using the Android SDK manager (run `android`).
+
+    You need to add the following line to your `local.properties`
+        
+    android.library.reference.1=PATH_TO_ANDROID_SDK/sdk/extras/google/google_play_services/libproject/google-play-services_lib
+    </info>
+
+## Variables
+
+In certain cases, a plugin may need to make configuration changes
+dependent on the target application. For example, to register for C2DM
+on Android, an app whose package id is `com.alunny.message` would
+require a permission such as:
+
+    <uses-permission
+    android:name="com.alunny.message.permission.C2D_MESSAGE"/>
+
+In such cases where the content inserted from the `plugin.xml` file is
+not known ahead of time, variables can be indicated by a dollar-sign
+followed by a series of capital letters, digits, or underscores. For
+the above example, the `plugin.xml` file would include this tag:
+
+    <uses-permission
+    android:name="$PACKAGE_NAME.permission.C2D_MESSAGE"/>
+
+plugman replaces variable references with the specified value, or the
+empty string if not found. The value of the variable reference may be
+detected (in this case, from the `AndroidManifest.xml` file) or
+specified by the user of the tool; the exact process is dependent on
+the particular tool.
+
+plugman can request users to specify a plugin's required
+variables. For example, API keys for C2M and Google Maps can be
+specified as a command-line argument:
+
+    plugman --platform android --project /path/to/project --plugin name|git-url|path --variable API_KEY=!@CFATGWE%^WGSFDGSDFW$%^#$%YTHGsdfhsfhyer56734
+
+To make the variable mandatory, the `<platform>` tag needs to contain
+a `<preference>` tag. For example:
+
+    <preference name="API_KEY" />
+
+plugman checks that these required preferences are passed in.  If not,
+it should warn the user how to pass the variable in and exit with a
+non-zero code.
+
+Certain variable names should be reserved, as listed below.
+
+## $PACKAGE_NAME
+
+The reverse-domain style unique identifier for the package,
+corresponding to the `CFBundleIdentifier` on iOS or the `package`
+attribute of the top-level `manifest` element in an
+`AndroidManifest.xml` file.